Table. GT2 by Zeiss. Gray Glasss. Gray/Brown GT Gray/Brown. Version 01/ /14
|
|
- Σάτυριον Καλλιγάς
- 5 χρόνια πριν
- Προβολές:
Transcript
1 GT2 by Zeiss - Fact Sheets Table of Contents GT2 by Zeiss GT High Index GT High Index PhotoFusion Gray/Brown GT High Index Transitions Gray/Brown n GT2 1.6 Clear Glass GT2 1.6 Photochromic Gray Glasss GT Polycarbonate GT PhotoFusion Gray/Brown GT Polarized Gray/Brown GT Transitions Gray/Brown GT2 1.5 GT2 1.5 PhotoFusion Gray/Brown GT2 1.5 Polarized Gray GT2 1.5 Transitions Gray/Brown Carl Zeiss Vision Version 01/ /14
2 PRODUCT FACT SHEET Substrate : 1.67 MR7 Product Name : ZEISS GT2 PROGRESSIVE Product type : SEMI-FINISHED BLANKS Reference : Z00003.FS4 Date : 14 June 2012 Page : 1 of 3 Product Range: Product: CAT Code: LGC: Hard Coated 589 L1846 Diameter Base Add Power Range Recommended Rx Range 71/ to to / to to / to to / to to / to to / to to / to to Material & Coating Specifications: Type MR-7 TM Refractive Index n d = (Helium d line nm) n e = (Mercury e line nm) Abbe Number ν d = 32 ν e = 32 Density 1.35 g.cm -3 UV Protection (ISO) 100% UVA and UVB (from 380nm to 280nm as per ISO ) Coating Type Hard Coated For External Distribution The Zeiss logo and Gradal are trademarks of Carl Zeiss Vision Inc. MR-7 is a trademark of Mitsui Chemicals Inc. 1 of 33
3 Reference : Z00003.FS4 Date : 14 June 2012 Page : 2 of 3 Blank Information: Base True Front (1.530) Radii Back Centre Thickness (±1.0mm) Edge Thickness at A Surfacing: Recommended centre & edge thicknesses for all regions: Power Range Minimum Centre Minimum Edge to to to to to to of 33
4 Reference : Z00003.FS4 Date : 14 June 2012 Page : 3 of 3 Product Markings: Recommended Range Chart: Front Surface: Top Code & Semi-visible Ink Markings: Back Surface Coding: 6,00 5,75 5,50 5,25 5,00 4,75 4,50 4,25 4,00 3,75 3,50 3,25 3,00 2,75 2,50 2,25 2,00 1,75 1,50 1,25 1,00 0,75 0,50 0,25 0,00-0,25-0,50-0,75-1,00-1,25-1,50-1,75-2,00-2,25-2,50-2,75-3,00-3,25-3,50-3,75-4,00-4,25-4,50-4,75-5,00-5,25-5,50-5,75-6,00-6,25-6,50-6,75-7,00-7,25-7,50-7,75-8,00-8,25-8,50-8,75-9,00-9,25-9,50-9,75-10,00-10,25-10,50-10,75-11,00-11,25-11,50-11,75-12,00-12,25-12,50-12,75-13,00-13,25-13,50-13,75-14,00-14,25-14,50-14,75-15,00-15,25-15,50-15,75-16, of 33
5 PRODUCT FACT SHEET Substrate : 1.67 MR7 PhotoFusion Product Name : ZEISS GT2 PROGRESSIVE Product type : SEMI-FINISHED BLANKS Reference : Z00309.FS3 Date : 26 July 2012 Page : 1 of 2 Product Range: Colour: Brown Grey CAT Code: F66 F65 Diameter Base Add Power Range Recommended Rx Range 71/ to to / to to / to to / to to / to to / to to / to to Material & Coating Specifications: Type MR-7 TM Refractive Index n d = n e = Abbe Number ν d = 32 ν e = 32 Density 1.35 g.cm -3 UV Protection (ISO) 100% UVA and 100% UVB Coated, Activated : 2.0mm Centre Thickness Coating Type Hard Coated Blank Information: Base True Front (1.530) Radii Back Curve Centre Thickness (±1.0mm) Edge Thickness For External Distribution 2012 Carl Zeiss Vision International GmbH. PhotoFusion is a registered trademark of Carl Zeiss Vision International GmbH. MR-7 is a trademark of Mitsui Chemicals Inc. 4 of 33
6 Reference : Z00309.FS3 Date : 26 July 2012 Page : 2 of 2 Surfacing: Recommended centre & edge thicknesses. Power Range Minimum Centre to Minimum Edge to or * 1.5 * to to *Thicknesses are based on whichever is the limiting factor Product Markings: Front Surface: Top Code & Semi-Visible Markings Front Surface: Ink Markings Back Surface: Coding 6,00 5,75 5,50 5,25 5,00 4,75 4,50 4,25 4,00 3,75 3,50 3,25 3,00 2,75 2,50 2,25 2,00 1,75 1,50 1,25 1,00 0,75 0,50 0,25 0,00-0,25-0,50-0,75-1,00-1,25-1,50-1,75-2,00-2,25-2,50-2,75-3,00-3,25-3,50-3,75-4,00-4,25-4,50-4,75-5,00-5,25-5,50-5,75-6,00-6,25-6,50-6,75-7,00-7,25-7,50-7,75-8,00-8,25-8,50-8,75-9,00-9,25-9,50-9,75-10,00-10,25-10,50-10,75-11,00-11,25-11,50-11,75-12,00-12,25-12,50-12,75-13,00-13,25-13,50-13,75-14,00-14,25-14,50-14,75-15,00-15,25-15,50-15,75-16,00 Recommended Range Chart: of 33
7 PRODUCT FACT SHEET Substrate : 1.67 TRANSITIONS SIGNATURE VII Product Name : ZEISS GT2 PROGRESSIVE Product type : SEMI-FINISHED BLANKS Reference : Z00540.FS1 Date : 29 November 2013 Page : 1 of 3 Product Range: Product: Gray HC Brown HC LGC: L6441 L6440 Cat Code: V52 V51 Diameter Base Add Power Range Recommended Rx Range 71/ to to / to to / to to / to to / to to / to to / to to Material & Coating Specifications: Type MR-7 TM Refractive Index n d = (Helium d line nm) n e = (Mercury e line nm) Abbe Number d = 32 e = 32 Density 1.35 g.cm -3 UV Protection (ISO) 100% UVA and UVB (from 380nm to 280nm as per ISO ) Coating Type Coated For External Distribution 2013 Carl Zeiss Vision Inc. MR-7 is a trademark of Mitsui Chemicals Inc. Transitions is a registered trademark of Transitions Optical Inc. 6 of 33
8 Reference : Z00540.FS1 Date : 29 November 2013 Page : 2 of 3 Blank Information: Base True Front (1.530) Radii Back Centre Thickness (±1.0mm) Edge Thickness at A Surfacing: Recommended centre & edge thicknesses for all regions: Power Range Minimum Centre to Minimum Edge to or * 1.0 * to to * Thicknesses are based on whichever is the limiting factor. 7 of 33
9 Reference : Z00540.FS1 Date : 29 November 2013 Page : 3 of 3 Product Markings: Recommended Range Chart: Front Surface: Top Code Only Ink Markings: Back Surface Coding: 6,00 5,75 5,50 5,25 5,00 4,75 4,50 4,25 4,00 3,75 3,50 3,25 3,00 2,75 2,50 2,25 2,00 1,75 1,50 1,25 1,00 0,75 0,50 0,25 0,00-0,25-0,50-0,75-1,00-1,25-1,50-1,75-2,00-2,25-2,50-2,75-3,00-3,25-3,50-3,75-4,00-4,25-4,50-4,75-5,00-5,25-5,50-5,75-6,00-6,25-6,50-6,75-7,00-7,25-7,50-7,75-8,00-8,25-8,50-8,75-9,00-9,25-9,50-9,75-10,00-10,25-10,50-10,75-11,00-11,25-11,50-11,75-12,00-12,25-12,50-12,75-13,00-13,25-13,50-13,75-14,00-14,25-14,50-14,75-15,00-15,25-15,50-15,75-16, of 33
10 PRODUCT FACT SHEET Substrate : 1.6 MR8 Product Name : ZEISS GT2 PROGRESSIVE Product type : SEMI-FINISHED BLANKS Reference : Z00190.FS2 Date : 14 June 2012 Page : 1 of 2 Product Range: Product: CAT Code: LGC: Uncoated n/a L4535 Diameter Base Add Power Range Recommended Rx Range 76/ to to / to to / to to / to to / to to / to to Material & Coating Specifications: Type Refractive Index MR-8 TM n d = (Helium d line nm) n e = (Mercury e line nm) Abbe Number ν d = 42 ν e = 41 Density 1.30 g.cm -3 UV Protection (ISO) 100% UVA and UVB (from 380nm to 280nm as per ISO ) Coating Type Uncoated Blank Information: Base True Front (1.530) Radii Back Centre Thickness (±1.0mm) Edge Thickness at A Surfacing: Recommended centre & edge thicknesses for all regions: For External Distribution The Zeiss logo is a trademark of Carl Zeiss Vision Inc. MR-8 is a trademark of Mitsui Chemicals Inc. 9 of 33
11 Reference : Z00190.FS2 Date : 14 June 2012 Page : 2 of 2 Power Range Minimum Centre to to to 2.0 Minimum Edge to to 0.6 Product Markings: Front Surface: Top Code & Semi-visible Recommended Range Chart: Zeiss MR8 GT2 / GT2 Short R1 and base curve Ink Markings: Back Surface Coding: of 33
12 Substrate : MINERAL 1.6 Photochromic Gray Product Name : GT2 1.6 Cat Code: B79 Product Type : PROGRESSIVE SEMI-FINISHED BLANKS Reference : Z00286.FS2 Date : 09 Sept 2010 Page : 1 of 3 Product Range: Diameter Base Add Power Range Recommended Rx Range 65/ to to / to to / to to / to to / to to / to to Material Specifications: Type Refractive Index Mineral 1.6 photochromic gr y η d = (Helium d line nm) η e = (Mercury e line nm) Abbe Number ν d = 43.0 ν e = 42.8 Density 2.74 g. cm 3 Transmittance (gray) Τ vd65 (0) = 87.0 % (surfaced 2.00mm plano) Τ vd65 (15) = 25.0 % (surfaced 2.00mm plano) UV Transmittance 1.2% SUVA / <0.1% SUVB (Uncoated: 2.0 mm Centre Thickness) For External Distribution The ZEISS logo is a trademark of Carl Zeiss Vision Inc. 11 of 33
13 Reference : Z00286.FS2 Date : 09 Sept 2010 Page : 2 of 3 Blank Geometry: Base Radius (As measured in R.I.) True Front Curve (1.530) Back (1.530) Centre Thickness Edge Note 1: Blank thickness is determined by centre thickness. Note 2: Blanks having visually uneven edge thickness shall be checked for prism. Surfacing: Recommended centre & edge thickness for all regions (without US): Power Range Minimum Centre Minimum Edge to to to ± to to to to to 0.5 Recommended centre & edge thickness for US: Power Range Minimum Centre Minimum Edge D to D D to D 1.0 This glass lens blank requires further treatment to be considered impact resistant. The final processor is responsible to render it impact resistant in accordance with 21 CFR as required in the US. Product Markings: Front Surface: Semi-Visible Markings Position : 2.5 mm nasal in height of geometrical centre Front Surface: Ink Markings (Uncoated: yellow water based) 12 of 33
14 Reference : Z00286.FS2 Date : 09 Sept 2010 Page : 3 of 3 Recommended Range Chart: PAL S of 33
15 PRODUCT FACT SHEET Substrate : POLYCARBONATE Product Name : ZEISS GT2 PROGRESSIVE Product type : SEMI-FINISHED BLANKS Reference : Z00004.FS2 Date : 4 April 2012 Page : 1 of 2 Product Range: Product: Hard Coated CAT Code: 496 Diameter Base Add Power Range Recommended Rx Range 75/ to to / to to / to to / to to / to to / to to Material & Coating Specifications: Type Polycarbonate Refractive Index n d = n e = Abbe Number ν d = 30 ν e = 29 Density 1.20 g.cm -3 UV Protection (ISO) Coating Type UVA : 100 %, UVB : 100 % Coated : 2.0 mm Centre Thickness Hard Coated Blank Information: Base True Front (1.530) Radii Back Curve Centre Thickness (±1.0mm) Edge Thickness For External Distribution The Zeiss logo is a trademark of Carl Zeiss Vision Inc. 14 of 33
16 Reference : Z00004.FS2 Date : 4 April 2012 Page : 2 of 2 Surfacing: Recommended centre & edge thicknesses for all regions: Power Range Minimum Centre to Minimum Edge to * 1.5 * to to *Thicknesses are based on whichever is the limiting factor Product Markings: Front Surface: Top Code & Semi-Visible Markings Front Surface: Ink Markings Back Surface: Coding Recommended Range Chart: of 33
17 PRODUCT FACT SHEET Substrate : POLYCARBONATE PhotoFusion Product Name : ZEISS GT2 PROGRESSIVE Product type : SEMI-FINISHED BLANKS Reference : Z00311.FS2 Date : 22 March 2012 Page : 1 of 2 Product Range: Colour: Brown Grey CAT Code: F64 F63 Diameter Base Add Power Range Recommended Rx Range 72/ to to / to to / to to / to to / to to / to to Material & Coating Specifications: Type Polycarbonate Refractive Index n d = n e = Abbe Number ν d = 30 ν e = 29 Density 1.20 g.cm -3 UV Protection (ISO) Coating Type 100% UVA and 100% UVB Coated, Activated : 2.0mm Centre Thickness Hard Coated Blank Information: Base True Front (1.530) Radii Back Curve Centre Thickness (±1.0mm) Edge Thickness For External Distribution 2012 Carl Zeiss Vision International GmbH PhotoFusion is a registered trademark of Carl Zeiss Vision International GmbH. 16 of 33
18 Reference : Z00311.FS2 Date : 22 March 2012 Page : 2 of 2 Surfacing: Recommended centre & edge thicknesses for all regions: Power Range Minimum Centre to Minimum Edge to * 1.5 * to to *Thicknesses are based on whichever is the limiting factor Product Markings: Front Surface: Top Code & Semi-Visible Markings Front Surface: Ink Markings Back Surface: Coding Recommended Range Chart: of 33
19 Substrate : POLYCARBONATE POLARIZED Product Name : GT POLY POLARIZED Cat Codes: T90-Brown T91-Gray Product Type : SEMI-FINISHED BLANKS Reference : Z00144.FS1 Date : Page : 1 of 3 Marketing Region: North America Coated Product Product Range: Diameter Base Add Power Range Rx Range Recommended to to to to to to to to to to to to Material Specification: Type Polycarbonate Refractive Index η d = (Helium d line nm) η e = (Mercury e line nm) Abbe Number ν d = 30 ν e = 29 Density 1.20 g.cm -3 Yellowness Index Uncoated : 1.5 mm Centre Thickness : 1.0 (All Instruments) UV Transmittance 1.5 mm Centre Thickness <2%T from 380 nm to 280 nm Coating Specification: Site Younger Optics Hard Coated (Younger Resin, non-tintable) Type Front Side For External Distribution The ZEISS logo is a trademark of Carl Zeiss Vision Inc. 18 of 33
20 Reference : Z00144.FS1 Date : Page : 2 of 3 Blank Geometry: (As measured in R.I.) Base True Front (1.530) Sag mm TFC Radii Back Curve Center Thickness Edge Thickness at A Note 1: Blank thickness is determined by centre thickness. Note 2: Blanks having visually uneven edge thickness shall be checked for prism. Product Markings: Front Surface: Semi-Visible Markings Front Surface: Ink Markings (Coated: yellow solvent based) 19 of 33
21 Reference : Z00144.FS1 Date : Page : 3 of 3 Surfacing: Recommended centre & edge thickness for all regions: Power Range Minimum Centre to to to to to 2.0 Minimum Edge to to 0.6 Recommended Range Chart: of 33
22 PRODUCT FACT SHEET Substrate : POLYCARBONATE TRANSITIONS SIGNATURE VII Product Name : ZEISS GT2 PROGRESSIVE Product type : SEMI-FINISHED BLANKS Reference : Z00539.FS1 Date : 04 December 2013 Page : 1 of 3 Product Range: Product: Gray HC Brown HC LGC: L6448 L6449 Cat Code: V55 V54 Diameter Base Add Power Range Recommended Rx Range 72/ to to / to to / to to / to to / to to / to to Material & Coating Specifications: Type Polycarbonate Refractive Index n d = n e = Abbe Number d = 30 e = 29 Density 1.20 g.cm -3 UV Protection (ISO) UVA: 100% UVB: 100% Coating Type Hard Coated For External Distribution 2013 Carl Zeiss Vision Inc. Transitions is a registered trademark of Transitions Optical Inc. 21 of 33
23 Reference : Z00539.FS1 Date : 04 December 2013 Page : 2 of 3 Blank Information: Base True Front (1.530) Radii Back Centre Thickness (±1.0mm) Edge Thickness at A Surfacing: Recommended centre & edge thicknesses for all regions: Power Range Minimum Centre to Minimum Edge to or * 1.5 * to to * Thicknesses are based on whichever is the limiting factor. 22 of 33
24 Reference : Z00539.FS1 Date : 04 December 2013 Page : 3 of 3 Product Markings: Front Surface: Top Code Only Recommended Range Chart: Minus Cylinder Convention Ink Markings: Back Surface Coding: S P H E R E S PLANO of 33
25 Substrate : HARD RESIN Product Name : GT2 Cat Code: 498 Product Type : PROGRESSIVE SEMI-FINISHED BLANKS Reference : Z00002.FS1 Date : Page : 1 of 3 Marketing Regions: Product Range: North America Coated Product Diameter Base Add Power Range Rx Range Recommended to to to to to to to to to to to to Material Specifications: Type Refractive Index CR-39 h d = (Helium d line nm) h e = (Mercury e line nm) Abbe Number n d = 58 n e = 56 Density 1.32 g.cm -3 Transmittance (1) ³ 90.0% Measured on any Spectrophotometer with traceable calibration. Yellowness Index (1) Coated, 0.0 YI E 1.0 Uncoated, 0.0 YI E 0.8 Haze (1) Uncoated : 0.5 Coated : 0.6 UV Transmittance <2%T from 350 to 280 nm Measured on any Spectrophotometer with traceable calibration (Referenced to ASTM D 1925) Measured on any transmittance instrument which directly correlates to the R&D Australia HunterLab UltraScan XE. Coating Specifications: Commercial name Ultra-Tough (Non tintable) Commercial Resin Code Coating SDC to 1.5 For External Distribution The ZEISS logo and Ultra-Tough` are trademarks of Carl Zeiss Vision Inc. 24 of 33
26 Reference : Z00002.FS1 Date : Page : 2 of 3 Surfacing: Recommended centre & edge thickness for all regions: Power Range Minimum Centre to to to 2.0 Minimum Edge to to 0.6 Blank Geometry: (As measured in R.I) Base True Front (1.530) TFC Radii Back Center Thickness Edge Thickness at A /- 1mm /- 1mm /- 1mm /- 1mm /- 1mm /- 1mm 11.5 Note 1 : Blank thickness is determined by centre thickness. Note 2 : Blanks having visually uneven edge thickness shall be checked for prism. Product Markings: Front Surface: Semi-Visible Markings Front Surface: Ink Markings (Coated: yellow solvent based) Back Surface : Coding 25 of 33
27 Reference : Z00002.FS1 Date : Page : 3 of 3 Recommended Range Chart: of 33
28 PRODUCT FACT SHEET Substrate : HARD RESIN PhotoFusion Product Name : ZEISS GT2 PROGRESSIVE Product type : SEMI-FINISHED BLANKS Reference : Z00307.FS3 Date : 22 March 2012 Page : 1 of 2 Product Range: Colour: Brown Grey CAT Code: F76 F75 Diameter Base Add Power Range Recommended Rx Range 72/ to to / to to / to to / to to / to to / to to Material & Coating Specifications: Type CR-39 Refractive Index n d = n e = Abbe Number ν d = 58 ν e = 56 Density 1.32 g.cm -3 UV Protection (ISO) Coating Type 100% UVA and 100% UVB Coated, Activated : 2.0mm Centre Thickness Hard Coated Blank Information: Base True Front (1.530) Radii Back Curve Centre Thickness (±1.0mm) Edge Thickness For External Distribution 2012 Carl Zeiss Vision International GmbH PhotoFusion is a registered trademark of Carl Zeiss Vision International GmbH. CR-39 is a registered trademark of PPG Industries Inc. 27 of 33
29 Reference : Z00307.FS3 Date : 22 March 2012 Page : 2 of 2 Surfacing: Power Range Recommended centre & edge thicknesses: USA Market Minimum Centre Int l Market Minimum Centre All Markets Minimum Edge to to or * 2.0 or * 1.0 * to *Thicknesses are based on whichever is the limiting factor Product Markings: Front Surface: Top Code & Semi-Visible Markings Front Surface: Ink Markings Back Surface: Coding Recommended Range Chart: of 33
30 Substrate : HARD RESIN Product Name : GT2 1.5 POLARIZED GRAY Cat Code: 799 Product Type : PROGRESSIVE SEMI-FINISHED BLANKS Reference : Z00091.FS1 Date : Page : 1 of 2 Marketing Regions: Product Range: North America Coated Product Diameter Base Add Power Range Rx Range Recommended to to to to to to to to to to to to Material Specifications: Type CR-39, Polarized Gray 3 Refractive Index η d = (Helium d line nm) η e = (Mercury e line nm) Abbe Number ν d = 58 ν e = 56 Density 1.32 g.cm -3 Coating Specifications: Site Younger Optics Hard Coated (Younger Resin, non-tintable) Type Front Side Surfacing: Due to the design, specialized surfacing is required. Meridian of Most Negative Power Centre Edge Plano / Minus 1.6 ± (1) Plus Note 1: As a guideline, a carrier surface is applied when the edge thickness on the horizontal axis exceeds 7mm. For External Distribution The ZEISS logo is a trademark of Carl Zeiss Vision Inc. 29 of 33
31 Reference : Z00091.FS1 Date : Page : 2 of 2 Product Markings: Front Surface: Semi-Visible Markings Front Surface: Ink Markings (Coated: yellow solvent based) Recommended Range Chart: 6,00 5,75 5,50 5,25 5,00 4,75 4,50 4,25 4,00 3,75 3,50 3,25 3,00 2,75 2,50 2,25 2,00 1,75 1,50 1,25 1,00 0,75 0,50 0,25 0,00-0,25-0,50-0,75-1,00-1,25-1,50-1,75-2,00-2,25-2,50-2,75-3,00-3,25-3,50-3,75-4,00-4,25-4,50-4,75-5,00-5,25-5,50-5,75-6,00-6,25-6,50-6,75-7,00-7,25-7,50-7,75-8,00-8,25-8,50-8,75-9,00-9,25-9,50-9,75-10, of 33
32 PRODUCT FACT SHEET Substrate : 1.5 TRANSITIONS SIGNATURE VII Product Name : ZEISS GT2 PROGRESSIVE Product type : SEMI-FINISHED BLANKS Reference : Z00538.FS1 Date : 28 November 2013 Page : 1 of 3 Product Range: Product: Gray HC Brown HC LGC: L6444 L6450 Cat Code: V50 V49 Diameter Base Add Power Range Recommended Rx Range 72/ to to / to to / to to / to to / to to / to to Material & Coating Specifications: Type CR-607 Refractive Index n d = n e = Abbe Number d = 61 e = 57 Density 1.27 g.cm -3 UV Protection (ISO) Activated: 2.0mm Centre Thickness. UVA: 100 %, UVB: 100 % Coating Type Hard Coated For External Distribution 2013 Carl Zeiss Vision Inc. CR-607 is a registered trademark of PPG Industries Inc. Transitions is a registered trademark of Transitions Optical Inc. 31 of 33
33 Reference : Z00538.FS1 Date : 28 November 2013 Page : 2 of 3 Blank Information: Base True Front (1.530) Radii Back Centre Thickness (±1.0mm) Edge Thickness at A Surfacing: Recommended centre & edge thicknesses for all regions: Power Range USA Market Minimum Centre Thickness Int l Market Minimum Centre to All Markets Minimum Edge to or * 2.0 or * 1.0 * to to of 33
34 Reference : Z00538.FS1 Date : 28 November 2013 Page : 3 of 3 Product Markings: Front Surface: Top Code Only Recommended Range Chart: Minus Cylinder Convention Ink Markings: Back Surface Coding: S 5.00 P 4.75 H 4.50 E 4.25 R 4.00 E 3.75 S PLANO of 33
2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Διαβάστε περισσότεραPrecision Metal Film Fixed Resistor Axial Leaded
Features EIA standard colour-coding Non-Flame type available Low noise and voltage coefficient Low temperature coefficient range Wide precision range in small package Too low or too high ohmic value can
Διαβάστε περισσότερα1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Διαβάστε περισσότεραData sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Διαβάστε περισσότεραCSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Διαβάστε περισσότεραCross sectional area, square inches or square millimeters
Symbols A E Cross sectional area, square inches or square millimeters of Elasticity, 29,000 kips per square inch or 200 000 Newtons per square millimeter (N/mm 2 ) I Moment of inertia (X & Y axis), inches
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Διαβάστε περισσότεραΣΩΛΗΝΕΣ ΕΥΘΕΙΑΣ ΡΑΦΗΣ LONGITUDINALLY WELDED STEEL PIPES
Βιομηχανικός Όμιλος Επεξεργασίας & Εμπορίας Χάλυβα (ΒΟΕΕΧ) Industrial Steel Processing & Trading Group (ISPTG) ΣΩΛΗΝΕΣ ΕΥΘΕΙΑΣ ΡΑΦΗΣ LONGITUDINALLY WELDED STEEL PIPES EXT DIAMETER INCHES ΕΞΩΤ ΔΙΑΜΕΤΡΟΣ
Διαβάστε περισσότεραTHICK FILM CHIP RESISTOR" CAL-CHIP ELECTRONICS INC."
THICK FILM CHIP RESISTOR CAL-CHIP ELECTRONICS INC. CAL-CHIP SERIES: RM SERIES 1 2 3 INTRODUCTION SCOPE Applies to all sizes of rectangular-type fixed chip resistors with Ruthenium base as material. FEATURES
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Διαβάστε περισσότεραPhotometric Data of Lamp
SSP6316-D5: Lamp Intensity Spatial Distribution of Tester Page 1/8 Photometric Data of Lamp Lamp Name: GL-66P36WW Lamp Size: Lamp Weight: Light Area: 6cm 6cm Measured Data of Lamp Voltage: 225. V Current:.287
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
Διαβάστε περισσότεραRC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
Διαβάστε περισσότεραData Sheet High Reliability Glass Epoxy Multi-layer Materials (High Tg & Low CTE type) Laminate R-1755V Prepreg R-1650V
Data Sheet High Reliability Glass Epoxy Multi-layer Materials (High Tg & Low CTE type) Laminate R-1755V Prepreg R-1650V Nov. 2015 No.15111336 Specification / Laminate R-1755V No.; 15111336-1 Property Units
Διαβάστε περισσότεραThin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Διαβάστε περισσότεραMetal Film Flame-Proof Resistors
Features -Low Noise -Low TCR from ±15~100PPM/ -High Precision from ±0.1%~1% -Complete Flameproof Construction UL-1412. -Coating meets UL94V-0 Applications -Telecommunication -Medical Equipment -Consumer
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication
Διαβάστε περισσότεραApproximation of distance between locations on earth given by latitude and longitude
Approximation of distance between locations on earth given by latitude and longitude Jan Behrens 2012-12-31 In this paper we shall provide a method to approximate distances between two points on earth
Διαβάστε περισσότεραNKT NTC Thermistor. Negative Temperature Coefficient Thermistor FEATURES
FEATURES Large, strong capacity of suppression of inrush current Big material (B value), small residual Small size, Long life, high reliability and fast response APPLICATIONS Switching -supply, switch,
Διαβάστε περισσότεραBulletin 1489 UL489 Circuit Breakers
Bulletin 489 UL489 Circuit Breakers Tech Data 489-A Standard AC Circuit Breaker 489-D DC Circuit Breaker 489-A, AC Circuit Breakers 489-D, DC Circuit Breakers Bulletin 489-A Industrial Circuit Breaker
Διαβάστε περισσότεραHigh Speed, Low Loss Multi-layer Materials
Data Sheet High Speed, Low Loss Multilayer Materials Laminate R5725 Prepreg R5620 UL/ANSI IPC4101 Slash Sheet FR4 Primary:/91 Secondary:/102(*) Jul. 2013 No.13070132 No.; 130701321 Property Units Test
Διαβάστε περισσότεραThick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MW) THICK FILM ON ALUMINA SUSTRATE,
Διαβάστε περισσότεραShenzhen Lys Technology Co., Ltd
Carbide drawing dies Properties of grade Grade Density TRS Average Grain size Hardness (HRA) (g/cm3) (MPa) (ųm) YL01 15.25 93.5 3300 0.8 YL10.2 14.5 92.0 4000 0.8 YG6 14.95 90 2400 1.6 YG6X 14.95 91.5
Διαβάστε περισσότεραSPECIFICATIONS. PRODUCT NAME: AC COB15W LED module (3120) General Customer MODEL NAME: CUSTOMER P/N: DATE: 2015-09-10
SPECIFICATIONS PRODUCT NAME: AC COB5W LED module (320) CUSTOMER: General Customer MODEL NAME: CUSTOMER P/N: DATE: 205-09-0 APT Electronics Ltd. CUSTOMER Prepared by Checked by Approved by Approved by He
Διαβάστε περισσότεραMetal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Διαβάστε περισσότεραSunlord Specifications subject to change without notice. Please check our website for latest information. Revised 2018/04/15
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Διαβάστε περισσότεραCarbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
Διαβάστε περισσότεραVAR Series Zinc Oxide Varistor
FEATURES Round Zinc Oxide, leaded Coating: epoxy resin, flame-retardant material Operating Temperature Range: -40 ~+105 Wide operating voltage Approvals: CQ C, UL, VDE RoHS 201165EU; REACH Compliant High
Διαβάστε περισσότεραSummary of Specifications
Snap Mount Large High CV High Ripple 85 C Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life for the series is 2,000 hours
Διαβάστε περισσότεραINPAQ Global RF/Component Solutions
MCB & MHC W Series Specification Product Name Series Multilayer Chip Ferrite Bead MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516 MCB and MHC Series Chip Ferrite Bead for Automotive Applications
Διαβάστε περισσότεραAquinas College. Edexcel Mathematical formulae and statistics tables DO NOT WRITE ON THIS BOOKLET
Aquinas College Edexcel Mathematical formulae and statistics tables DO NOT WRITE ON THIS BOOKLET Pearson Edexcel Level 3 Advanced Subsidiary and Advanced GCE in Mathematics and Further Mathematics Mathematical
Διαβάστε περισσότεραΕ Κ Θ Ε Σ Η Δ Ο Κ Ι Μ Ω Ν
Αριθμός έκθεζης δοκιμών / Test report number Σειριακός αριθμός οργάνοσ / Instrument serial No T Πελάηης / Customer TOTAL Q Επγαζηήπια Διακπιβώζεων A.E. Κοπγιαλενίος 20, Τ.Κ. 11526 Αθήνα 20 Korgialeniou
Διαβάστε περισσότεραMS SERIES MS DESK TOP ENCLOSURE APPLICATION EXAMPLE FEATURE. Measuring instruments. Power supply equipments
MS SERIES MS DESK TOP ENCLOSURE FEATURE Available in 176 sizes. Screws are not appeared on the surface. Usable as rack mount case with optinal mounting bracket. There are no ventilation hole for cover
Διαβάστε περισσότεραAluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Διαβάστε περισσότεραSurface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
Διαβάστε περισσότεραSMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008
SMD Wire Wound Ferrite Chip Inductors - LS Series LS Series LS Series is the newest in open type ferrite wire wound chip inductors. The wire wound ferrite construction supports higher SRF, lower DCR and
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
Διαβάστε περισσότεραAluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
Διαβάστε περισσότεραOperating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
Διαβάστε περισσότεραCSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Διαβάστε περισσότεραSpherical Bearings Product Overview
Spherical Bearings Product Overview Table of Contents EN4613 R EN4613 S EN4614 R EN4614 S FMGB....4 FMGN....4 FMGS....4 FMGU....4 EN2584 / FRE EN2585 / FRL EN3048 EN4037 EN4038 EN4039 FRA EN2335 EN4265
Διαβάστε περισσότεραΠολυκαρβονικά Φύλλα - Κυψελωτά & Συμπαγή
PVC-ZHONGSHAN SOLID-HOLLOW Sheet -Front Cover Πολυκαρβονικά Φύλλα - Κυψελωτά & Συμπαγή Polycarbonate SOLID -,,,,, Embossed Polycarbonate HOLLOW Sheets - Twin-Wall and Triple-Wall sheet ISO9001 Certified
Διαβάστε περισσότεραSmaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
Διαβάστε περισσότεραSMD - Resistors. Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612 official distributor of 1. Scope Thick Film Chip Resistor-SMDC Series -This specification applies
Διαβάστε περισσότεραOil grooved pads PFO series
Oil grooved pads PFO series Connector type Top Side Pad with locking fitting PFO K φ20 ~ 40 P237 Barb connector PFOTK PFOYK Pad with spring fitting NAPFO S Stroke(mm) φ20 ~ 40 6,15,30 P239 Female screw
Διαβάστε περισσότεραSelf-Lubricating Rod End > Spherical Bearings Product Overview
Self-Lubricating Product Overview Table of Contents FMW3E_.4 / NSA8143 FMW3F_.4 / NSA8149 REM REF EN6056 Page IV-3-4 IV-5-6 IV-7-8 IV-9-10 IV-11-12 FMW3E_.4 / NSA8143 NSA8143-04 X R F P FMW3E 4 4 X R K
Διαβάστε περισσότεραSunlord. Wire Wound SMD Power Inductors SWCS Series SWCS XXXX -XXX T. Operating Temperature: -25 ~ +105 FEATURES APPLICATIONS PRODUCT IDENTIFICATION
Wire Wound SMD Power Inductors SWCS Series Operating Temperature: -25 ~ +105 FEATURES Various high power inductors are superior to be high saturation Suitable for surface mounting equipment APPLICATIONS
Διαβάστε περισσότεραArtiste Picasso 9.1. Total Lumen Output: lm. Peak: cd 6862 K CRI: Lumen/Watt. Date: 4/27/2018
Color Temperature: 62 K Total Lumen Output: 21194 lm Light Quality: CRI:.7 Light Efficiency: 27 Lumen/Watt Peak: 1128539 cd Power: 793 W x: 0.308 y: 0.320 Test: Narrow Date: 4/27/2018 0 Beam Angle 165
Διαβάστε περισσότερα± 20% ± 5% ± 10% RENCO ELECTRONICS, INC.
RL15 RL16, RL17, RL18 MINIINDUCTORS CONFORMALLY COATED MARKING The nominal inductance is marked by a color code as listed in the table below. Color Black Brown Red Orange Yellow Green Blue Purple Grey
Διαβάστε περισσότεραMATRIX. EBARA PUMPS EUROPE S.p.A. HORIZONTAL MULTISTAGE PUMPS
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 2-3-4-5 impellers ) 204 PERFORMANCE CURVE 3 ( 6-7-8-9 impellers ) 205
Διαβάστε περισσότεραDETERMINATION OF THERMAL PERFORMANCE OF GLAZED LIQUID HEATING SOLAR COLLECTORS
ΕΘΝΙΚΟ ΚΕΝΤΡΟ ΕΡΕΥΝΑΣ ΦΥΣΙΚΩΝ ΕΠΙΣΤΗΜΩΝ ΗΜΟΚΡΙΤΟΣ / DEMOKRITOS NATIONAL CENTER FOR SCIENTIFIC RESEARCH ΕΡΓΑΣΤΗΡΙΟ ΟΚΙΜΩΝ ΗΛΙΑΚΩΝ & ΑΛΛΩΝ ΕΝΕΡΓΕΙΑΚΩΝ ΣΥΣΤΗΜΑΤΩΝ LABORATORY OF TESTIN SOLAR & OTHER ENERY
Διαβάστε περισσότεραHigh Voltage Thick Film Chip Resistor
Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Highly reliable multilayer electrode construction -Higher component and
Διαβάστε περισσότεραFixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Διαβάστε περισσότεραCERAMIC DISC CAPACITOR Class II 50V,100V,500V,1KV,2KV,3KV, Hi-K Type
Features: Capacitance has non-linear temperature coefficient Large in small size Epoxy Coating for 2KV and 3KV parts (equivalent to UL94V-0 standards) RoHS Compliance Halogen free products are available
Διαβάστε περισσότεραThick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MΩ) THICK FILM ON ALUMINA SUSTRATE,
Διαβάστε περισσότεραUDZ Swirl diffuser. Product facts. Quick-selection. Swirl diffuser UDZ. Product code example:
UDZ Swirl diffuser Swirl diffuser UDZ, which is intended for installation in a ventilation duct, can be used in premises with a large volume, for example factory premises, storage areas, superstores, halls,
Διαβάστε περισσότεραProject: 296 File: Title: CMC-E-600 ICD Doc No: Rev 2. Revision Date: 15 September 2010
Project: 296 File: Title: CMC-E-600 ICD Doc No: 21029100-406 Rev 2. Revision Date: 15 September 2010 Contract No.: Revisions Table ECR/ECN LTR Description Date 0 Pre Contract draft 29 July 2010 1 Replace
Διαβάστε περισσότεραTechnical Information Efficiency and Derating SUNNY BOY / SUNNY TRIPOWER / SUNNY MINI CENTRAL
Technical Information Efficiency and Derating SUNNY BOY / SUNNY TRIPOWER / SUNNY MINI CENTRAL WirkungDerat-TI-en-40 Version 4.0 ENGLISH Legal Provisions SMA Solar Technology AG Legal Provisions The information
Διαβάστε περισσότεραThick Film Array Chip Resistor
CN Series Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Reduction of assembly costs and
Διαβάστε περισσότερα(1) Describe the process by which mercury atoms become excited in a fluorescent tube (3)
Q1. (a) A fluorescent tube is filled with mercury vapour at low pressure. In order to emit electromagnetic radiation the mercury atoms must first be excited. (i) What is meant by an excited atom? (1) (ii)
Διαβάστε περισσότεραThick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512 official distributor of Thick Film Chip Resistor-SMDC Series 1. Scope -This specification applies to all
Διαβάστε περισσότεραControl cable YSLY-JZ/-JB/-OZ/-OB
Control cable YSLY-JZ/-JB/-OZ/-OB conductor material: bare copper conductor construction: fine stranded, class 5 insulation: PVC TI1 stranding unit: core sheathing material: PVC TM2 colour of outer sheath:
Διαβάστε περισσότερα3.4 MI Components, Allowable Load Data and Specifications. MI Girder 90/120. Material Specifications. Ordering Information
MI Girder 90/120 Materia Specifications 1 15 / 16 " (50) Materia Gavanizing Ordering Information Description S235 JRG2 DIN 10025, (ASTM A283 (D) 34 ksi) Hot-dip gavanized 3 mis (75 μm) DIN EN ISO 1461,
Διαβάστε περισσότεραΕΚΘΕΣΗ ΟΚΙΜΗΣ ΙΕΙΣ ΥΣΗΣ ΒΡΟΧΗΣ RAIN PENETRATION TEST
ΕΘΝΙΚΟ ΚΕΝΤΡΟ ΕΡΕΥΝΑΣ ΦΥΣΙΚΩΝ ΕΠΙΣΤΗΜΩΝ ΗΜΟΚΡΙΤΟΣ / DEMOKRITOS NATIONAL CENTER FOR SCIENTIFIC RESEARCH ΕΡΓΑΣΤΗΡΙΟ ΟΚΙΜΩΝ ΗΛΙΑΚΩΝ & ΑΛΛΩΝ ΕΝΕΡΓΕΙΑΚΩΝ ΣΥΣΤΗΜΑΤΩΝ LABORATORY OF TESTING SOLAR & OTHER ENERGY
Διαβάστε περισσότεραΧΑΛΥΒΔΟΣΩΛΗΝΕΣ ΕΛΙΚΟΕΙΔΟΥΣ ΡΑΦΗΣ SPIRALLY WELDED STEEL PIPES
Βιομηχανικός Όμιλος Επεξεργασίας & Εμπορίας Χάλυβα (ΒΟΕΕΧ) Industrial Steel Processing & Trading Group (ISPTG) ΧΑΛΥΒΔΟΣΩΛΗΝΕΣ ΕΛΙΚΟΕΙΔΟΥΣ ΡΑΦΗΣ SPIRALLY WELDED STEEL PIPES EXT DIAMETER INCHES ΕΞΩΤ ΔΙΑΜΕΤΡΟΣ
Διαβάστε περισσότεραCeramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Διαβάστε περισσότερα4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
Διαβάστε περισσότεραMAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
Διαβάστε περισσότεραPRODUCT IDENTIFICATION SWPA 3012 S 1R0 N T
Wire Wound SMD Power Inductors SWPA Series Operating temperature range: -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded conruction reduces buzz noise to ultra-low levels Metallization
Διαβάστε περισσότεραGAUGE BLOCKS. Grade 0 Tolerance for the variation in length. Limit deviation of length. ± 0.25μm. 0.14μm ±0.80μm. ± 1.90μm. ± 0.40μm. ± 1.
GAUGE BLOCKS Accuracy according to ISO650 Nominal length (mm) Limit deviation of length Grade 0 Tolerance for the variation in length Grade Grade Grade Grade 2 Limit deviations of Tolerance for the Limit
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Διαβάστε περισσότεραB37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Διαβάστε περισσότεραAT Surface Mount Package SOT-363 (SC-70) I I Y. Pin Connections B 1 C 1 E 1 E 2 C 2 B , 7:56 PM
AT-3263 Surface Mount Package SOT-363 (SC-7) I I Y Pin Connections B 1 C 1 E 1 E 2 C 2 B 2 Page 1 21.4., 7:6 PM Absolute Maximum Ratings [1] Absolute Thermal Resistance [2] : Symbol Parameter Units Maximum
Διαβάστε περισσότεραMSN DESK TOP ENCLOSURE WITH STAND / CARRYING HANDLE
MSN SERIES MSN DESK TOP ENCLOSURE WITH STAND / CARRYING HANDLE W H FEATURE Available in 176 sizes. Stand / carrying handle can be adjusted in 30 degree. Maximum load is kg. There are no ventilation hole
Διαβάστε περισσότεραTSV. Suntan ZINC OXIDE VARISTOR. Operating Temperature Range: -40 ~+85 DIMENSION. T Thickness(max.) L:16mm min
Operating Temperature Range: -40 ~+85 DIMENSION L:16mm min SIZE D MAX H MAX d+-0.05 E c max D05 8 11 0.5 5±0.8 2.5 D07 10 12.5 0.5 5±0.8 2.5 D10 13.5 16 0.7 7.5±0.8 2.5 D14 17.5 20 0.7 7.5±0.8 2.5 D20
Διαβάστε περισσότεραRod End > Spherical Bearings Product Overview
Rod End > Spherical Bearings Product Overview Table of Contents FMW3E_.4 / NSA8143 FMW3F_.4 / NSA8149 REM REF Page IV-3-4 IV-5-6 IV-7-8 IV-9-10 FMW3E_.4 / NSA8143 Rod End > Spherical Bearings Schematic
Διαβάστε περισσότεραCurrent Sensing Chip Resistor
Features -3 atts power rating in 1 att size, 1225 package -Low CR of ±100 PPM/ C -Resistance values from 1m to 1 ohm -High purity alumina substrate for high power dissipation -Long side terminations with
Διαβάστε περισσότεραNTC Thermistor:TSM type
Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
Διαβάστε περισσότεραMelf Carbon Film Resistor MMC Series
Melf Resistor Melf Carbon Film Resistor MMC Series Coating color: Beige Features - Tolerance up to ±2%. - Wide resistance range:1ω to 10MΩ. Type Dimension TYPE L D C S 0102 2.00±0.10 1.30±0.10 0.55±0.10
Διαβάστε περισσότεραEnantioselective Organocatalytic Michael Addition of Isorhodanines. to α, β-unsaturated Aldehydes
Electronic Supplementary Material (ESI) for Organic & Biomolecular Chemistry. This journal is The Royal Society of Chemistry 2016 Enantioselective Organocatalytic Michael Addition of Isorhodanines to α,
Διαβάστε περισσότεραΠνεσμαηικά Γικαιώμαηα 2006 Ίδρσμα ECDL (ECDL Foundation - www.ecdl.org)
Έθδνζε 1.5 PEOPLECERT Hellas A.E - Φορέας Πιζηοποίηζης Ανθρώπινοσ Γσναμικού Κνξαή 3, 105 64 Αζήλα, Τει.: 210 372 9100, Fax: 210 372 9101, e-mail: info@peoplecert.org, www.peoplecert.org Πνεσμαηικά Γικαιώμαηα
Διαβάστε περισσότεραSEN TRONIC AG 3-2 7 0 0 7 A 3 57 3 3 AB 93 :, C,! D 0 7 % 0 7 3 3 93 : 3 A 5 93 :
# 3-270 07A35733 AB93:,C,!D 07% 0733 93: 3A593:!"#$%% &%&''()*%'+,-. &%&''(/*%'+0. 1*23 '4# 54/%6%7%53 *323 %7 77# %%3#% 8908/"/*55 :1$;/ = 7?@ > 7= 7 %! "$!"#$%&#%'(%%)*#$%&#%'(%#++#,-."/-0-1222"/-0-1
Διαβάστε περισσότεραConfigurations: Dimension (mm) B (max) A (max) 0.20 IWCCG1005. Inductance Range IWCCG ~ IWCCG ~ 1000 IWCCG
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Διαβάστε περισσότεραTrimmable Thick Film Chip Resistor
rimmable hick ilm Chip Resistor R Series rimmable hick ilm Chip Resistor Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. eatures
Διαβάστε περισσότεραXKT. Metal Oxide Varistor FEATURES
FEATURES Operating Temperature Range: -40 ~+105 Body Diameters Range From 5D to 20D Wide Operating from 18V to 1800V Full compliance with RoSH and REH DIMENSION L:16mm min SIZE D MAX H MAX d+-0.05 E c
Διαβάστε περισσότεραIWCSeries FEATURES APPLICATION ORDERING CODE TRIGON COMPONENTS. Configurations: Dimension (mm) IWC C G 1608 K 22N T (1) (2) (3) (4) (5) (6) (7)
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Διαβάστε περισσότεραΕΠΙΤΟΙΧΑ ΡΑΦΙΑ WALL UNIT
ΕΠΙΤΟΙΧΑ ΡΑΦΙΑ WALL UNIT # # NO ΠΕΡΙΓΡΑΦΗ ΠΡΟΪΟΝΤΟΣ PRODUCT DESCRIPTION 1 ΚΟΛΩΝΑ UPRIGHT ΠΟΔΑΡΙΚΟ BASELEG 3 ΠΛΑΤΗ BACK PANEL 4 ΒΡΑΧΙΟΝΑΣ BRACKET 5 ΡΑΦΙ SHELF 6 ΚΟΡΝΙΖΑ ΤΙΜΩΝ PRICE STRIP 7 ΜΠΑΖΟ PLINTH
Διαβάστε περισσότεραAvailable Specification & Size of CSAC Aluminium Products
Available Specification & Size of CSAC Aluminium Products 1. Casting Ware Application Specification Alloy Temper or sand mode, shell mode & metal mode. JIS H5202 AC2A, AC2B, AC3A, AC4B, AC4C, AC7A, AC7B,
Διαβάστε περισσότεραCurrent Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Διαβάστε περισσότεραNPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
Διαβάστε περισσότεραΓΥΑΛΙΝΗ ΠΟΡΤΑ GLASS DOOR
ΓΥΑΛΙΝΗ ΠΟΡΤΑ GLASS DOOR ΠΟΡΤΑ ΘΑΛΑΜΟΥ ΚΕΝΤΡΙΚΗ ΓΥΑΛΙΝΗ FULL GLASS CENTRAL CABIN DOOR.1. C ΚΑΘΑΡΟ ΑΝΟΙΓΜΑ ΚΑ / CLEAR OPENING CO ΜΗΧΑΝΙΣΜΟΣ Μ / OPERATOR O 1/2 ΚΑ + 00 / 1/2 CO + 00 220 4 22 ΤΥΠΟΠΟΙΗΜΕΝΟ
Διαβάστε περισσότεραPhotomultiplier Tube Assemblies
hotomultiplier Tube Assemblies hotomultiplier Tube Assemblies hotomultiplier tube assemblies are made up of a photomultiplier tube, a voltagedivider circuit and other components, all integrated into a
Διαβάστε περισσότεραDC-DC converter circuits for mobile phones, wearbale devices, DVCs, HDDs, etc.
Multilayer Chip Power Inductor MPH Series Operating Temp. : -40 ~+85 FEATURES Higher DC bias current and lower DC resistance due to Trench Technology Low profile and thin thickness Monolithic structure
Διαβάστε περισσότεραRSDW08 & RDDW08 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (Typ.) CAPACITOR LOAD (MAX.) RSDW08F-03 344mA 3.3V 2000mA 80% 2000μF RSDW08F-05
Διαβάστε περισσότεραFinish: Anticorrosive finish in polyester. Number of motor poles 4=1400 r/min. 50 Hz 6=900 r/min. 50 Hz 8=750 r/min. 50 Hz
HEP HEPT HEP: Wall-mounted axial fans, with IP65 motor HEPT: Long-cased axial fans, with IP65 motor Wall-mounted axial (HEP) and long-cased (HEPT) fans, with fibreglass-reinforced plastic impeller. Fan:
Διαβάστε περισσότεραSunlord. Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) 2R2 SPH
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Διαβάστε περισσότεραMonolithic Crystal Filters (M.C.F.)
Monolithic Crystal Filters (M.C.F.) MCF (MONOLITHIC CRYSTAL FILTER) features high quality quartz resonators such as sharp cutoff characteristics, low loss, good inter-modulation and high stability over
Διαβάστε περισσότερα