SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)
|
|
- Λυσιμάχη Δημητρίου
- 5 χρόνια πριν
- Προβολές:
Transcript
1 SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES) (8) venkel.com
2 Features: RoHS Compliant and Halogen Free Good Q values High SRF range: 1nH to 47uH Tolerance: ±.2nH, ±.3nH, ±2%, ±5%, ±1% High reliability with high speed surface mount assembly capabilities ratings from 45mA to 1.36A Structure MRFI 63-4N7 K T Series Size Value 4N7 = 4.7nH 47N = 47nH R47 = 47nH 4R7 = 4.7μH 47 = 47μH Tolerance B = ±.2nH S = ±.3nH G = ± 2% J = ± 5% K = ± 1% Packaging T = Tape & Reel Example P/N: MRFI63-4N7KT NOTE: Core composition is either ceramic or ferrite depending on size and value. Dimensions Termination is Gold Flash over Nickel. Unit: inches (mm) S Bottom View Side View Size L W T S (t 1 ) 2 (5).39 ±.4 (1. ±.1).22 ±.4 (.55 ±.1).2 ±.6 (.5 ±.15).8 ±.4 (.2 ±.1).2 L 63 (168).63 ±.8 (1.6 ±.2).41 ±.8 (1.5 ±.2).41±.8 (1.5 ±.2).14 ±.4 (.35 ±.1).5 85 (212).8 ±.8 (2. ±.2).5 ±.8 (1.25 ±.2).48 ±.8 (1.2 ±.2).16 ±.4 (.4 ±.1).6 Termination finish is Gold Flash over Nickel w T t 1 8 (252) 121 (3225).98 ±.8 (2.6 ±.2).126 ±.8 (3.2 ±.2).8 ±.8 (2.1 ±.2).12 ±.8 (2.6 ±.2).63 ±.8 (1.6 ±.2).87 ±.8 (2.2 ±.2).2 ±.4 (.5 ±.1).2 ±.4 (.5 ±.1) rd Layer 2nd Layer 1st Layer Ceramic Core Ferrite Core Termination a) 1st Layer Mo/Mn or Pd/Ag Pd/Ag b) 2nd layer Ni Ni c) 3rd layer Au Sn Operating / Storage Temperature Range Operating Temperature Range Characteristics Operating Temperature Range is the range of ambient temperature at which the inductor can be operated continuously at rated current. Temp. Range: Ceramic core - C to C Ferrite core - C to + 85 C Standard Atmospheric Conditions Unless otherwise specified, the standard range of atmospheric conditions for making measurements and tests are as follows: Ambient Temperature: 25 C (2 C) ± 2 C Relative Humidity: 6% to 7% Air Pressure: 86 Kpa to 16 Kpa sales@venkel.com Phone: Toll Free: Web: 1
3 2 ( Ceramic Core) Q 9 1. ±.2nH, ±.3nH MRFI2-1NNT 1.9 ±.2nH, ±.3nH MRFI2-1N9NT 2. ±.2nH, ±.3nH MRFI2-2NNT 2.2 ±.2nH, ±.3nH MRFI2-2N2NT 2.4 ±.2nH, ±.3nH MRFI2-2N4NT 2.7 ±.2nH, ±.3nH MRFI2-2N7NT 3.3 ±.2nH, ± 5%, ± 1% MRFI2-3N3NT 3.6 ±.2nH, ± 5%, ± 1% MRFI2-3N6NT 3.9 ±.2nH, ± 5%, ± 1% MRFI2-3N9NT 4.3 ±.2nH, ± 5%, ± 1% MRFI2-4N3NT 4.7 ±.2nH, ± 5%, ± 1% MRFI2-4N7NT 5.1 ±.2nH, ± 5%, ± 1% MRFI2-5N1NT 5.6 ±.2nH, ± 5%, ± 1% MRFI2-5N6NT 6.2 ±.2nH, ± 5%, ± 1% MRFI2-6N2NT 6.8 ±.2nH, ± 5%, ± 1% MRFI2-6N8NT 7.5 ±.2nH, ± 5%, ± 1% MRFI2-7N5NT 8.2 ±.2nH, ± 5%, ± 1% MRFI2-8N2NT 8.7 ±.2nH, ± 5%, ± 1% MRFI2-8N7NT 9. ±.2nH, ± 5%, ± 1% MRFI2-9NNT 9.5 ±.2nH, ± 5%, ± 1% MRFI2-9N5NT 1. ± 2%, ± 5%, ± 1% MRFI2-1NNT 11. ± 2%, ± 5%, ± 1% MRFI2-11NNT 12. ± 2%, ± 5%, ± 1% MRFI2-12NNT 13. ± 2%, ± 5%, ± 1% MRFI2-13NNT 15. ± 2%, ± 5%, ± 1% MRFI2-15NNT 16. ± 2%, ± 5%, ± 1% MRFI2-16NNT 18. ± 2%, ± 5%, ± 1% MRFI2-18NNT 19. ± 2%, ± 5%, ± 1% MRFI2-19NNT 2. ± 2%, ± 5%, ± 1% MRFI2-2NNT 22. ± 2%, ± 5%, ± 1% MRFI2-22NNT 23. ± 2%, ± 5%, ± 1% MRFI2-23NNT 24. ± 2%, ± 5%, ± 1% MRFI2-24NNT 27. ± 2%, ± 5%, ± 1% MRFI2-27NNT 3. ± 2%, ± 5%, ± 1% MRFI2-3NNT 33. ± 2%, ± 5%, ± 1% MRFI2-33NNT 36. ± 2%, ± 5%, ± 1% MRFI2-36NNT 39. ± 2%, ± 5%, ± 1% MRFI2-39NNT. ± 2%, ± 5%, ± 1% MRFI2-NNT 43. ± 2%, ± 5%, ± 1% MRFI2-43NNT 47. ± 2%, ± 5%, ± 1% MRFI2-47NNT 51. ± 5%, ± 1% MRFI2-51NNT 56. ± 5%, ± 1% MRFI2-56NNT 68. ± 5%, ± 1% MRFI2-68NNT 82. ± 5%, ± 1% MRFI2-82NNT 91. ± 5%, ± 1% MRFI2-91NNT. ± 5%, ± 1% MRFI2-R1NT 2 sales@venkel.com Phone: Toll Free: Web:
4 63 ( Ceramic Core) Q ±.2nH, ±.3nH MRFI63-1N6NT 1.8 ±.2nH, ±.3nH MRFI63-1N8NT 2. ±.2nH, ±.3nH MRFI63-2NNT 3.9 ±.2nH, ±.3nH MRFI63-3N9NT 4.3 ±.2nH, ±.3nH MRFI63-4N3NT 4.7 ±.2nH, ±.3nH MRFI63-4N7NT 5.1 ± 5%, ± 1% MRFI63-5N1NT 5.6 ± 5%, ± 1% MRFI63-5N6NT 6.8 ±.2nH, ± 5%, ± 1% MRFI63-6N8NT 7.5 ±.2nH, ± 5%, ± 1% MRFI63-7N5NT 8.2 ±.2nH, ± 5%, ± 1% MRFI63-8N2NT 8.7 ± 5%, ± 1% MRFI63-8N7NT 9.1 ± 5%, ± 1% MRFI63-9N1NT 9.5 ± 5%, ± 1% MRFI63-9N5NT 1. ± 2%, ± 5%, ± 1% MRFI63-1NNT 11. ± 5%, ± 1% MRFI63-11NNT 12. ± 2%, ± 5%, ± 1% MRFI63-12NNT 13. ± 5%, ± 1% MRFI63-13NNT 15. ± 2%, ± 5%, ± 1% MRFI63-15NNT 16. ± 5%, ± 1% MRFI63-16NNT 18. ± 2%, ± 5%, ± 1% MRFI63-18NNT 2. ± 5%, ± 1% MRFI63-2NNT 22. ± 2%, ± 5%, ± 1% MRFI63-22NNT 24. ± 5%, ± 1% MRFI63-24NNT 27. ± 2%, ± 5%, ± 1% MRFI63-27NNT 3. ± 5%, ± 1% MRFI63-3NNT 33. ± 2%, ± 5%, ± 1% MRFI63-33NNT 36. ± 5%, ± 1% MRFI63-36NNT 39. ± 2%, ± 5%, ± 1% MRFI63-39NNT 43. ± 5%, ± 1% MRFI63-43NNT 47. ± 2%, ± 5%, ± 1% MRFI63-47NNT 51. ± 5%, ± 1% MRFI63-51NNT 56. ± 2%, ± 5%, ± 1% MRFI63-56NNT 62. ± 5%, ± 1% MRFI63-62NNT 68. ± 2%, ± 5%, ± 1% MRFI63-68NNT 72. ± 2%, ± 5%, ± 1% MRFI63-72NNT 82. ± 2%, ± 5%, ± 1% MRFI63-82NNT 9. ± 5%, ± 1% MRFI63-9NNT ± 2%, ± 5%, ± 1% MRFI63-R1NT 11 ± 2%, ± 5%, ± 1% MRFI63-R11NT 12 ± 2%, ± 5%, ± 1% MRFI63-R12NT 13 ± 5%, ± 1% MRFI63-R13NT 15 ± 2%, ± 5%, ± 1% MRFI63-R15NT 18 ± 2%, ± 5%, ± 1% MRFI63-R18NT 2 ± 5%, ± 1% MRFI63-R2NT 21 ± 5%, ± 1% MRFI63-R21NT 22 ± 2%, ± 5%, ± 1% MRFI63-R22NT 2 ± 5%, ± 1% MRFI63-R24NT 27 ± 2%, ± 5%, ± 1% MRFI63-R27NT 33 ± 5%, ± 1% MRFI63-R33NT 39 ± 5%, ± 1% MRFI63-R39NT sales@venkel.com Phone: Toll Free: Web: 3
5 85 (Ceramic Core) 2.2 ±.2nH, ±.3nH 25 MHz MRFI85-2N2NT 2.7 ±.2nH, ±.3nH 25 MHz MRFI85-2N7NT 3.3 ±.2nH, ±.3nH 25 MHz MRFI85-3N3NT 3.9 ±.2nH, ±.3nH 25 MHz MRFI85-3N9NT 4.7 ±.2nH, ±.3nH 25 MHz MRFI85-4N7NT 5.1 ±.2nH, ± 5%, ± 1% 25 MHz MRFI85-5N1NT 5.6 ±.2nH, ± 5%, ± 1% 25 MHz MRFI85-5N6NT 6.8 ±.2nH, ± 5%, ± 1% 25 MHz MRFI85-6N8NT 8.2 ±.2nH, ± 5%, ± 1% 25 MHz MRFI85-8N2NT 1. ± 2%, ± 5%, ± 1% 25 5 MHz MRFI85-1NNT 12. ± 2%, ± 5%, ± 1% 25 5 MHz MRFI85-12NNT 15. ± 2%, ± 5%, ± 1%, 25 5 MHz MRFI85-15NNT 18. ± 2%, ± 5%, ± 1% 25 5 MHz MRFI85-18NNT 22. ± 2%, ± 5%, ± 1% 25 5 MHz MRFI85-22NNT 27. ± 2%, ± 5%, ± 1% 25 5 MHz MRFI85-27NNT 33. ± 2%, ± 5%, ± 1%, 25 5 MHz MRFI85-33NNT 39. ± 2%, ± 5%, ± 1% 25 5 MHz MRFI85-39NNT 47. ± 2%, ± 5%, ± 1% 2 5 MHz MRFI85-47NNT 56. ± 2%, ± 5%, ± 1% 2 5 MHz MRFI85-56NNT 68. ± 2%, ± 5%, ± 1%, 2 5 MHz MRFI85-68NNT 82. ± 2%, ± 5%, ± 1% 15 5 MHz MRFI85-82NNT ± 2%, ± 5%, ± 1% 15 5 MHz MRFI85-R1NT 12 ± 2%, ± 5%, ± 1% MHz MRFI85-R12NT 15 ± 2%, ± 5%, ± 1%, 25 MHz MRFI85-R15NT 18 ± 2%, ± 5%, ± 1% 25 MHz 9.78 MRFI85-R18NT 22 ± 2%, ± 5%, ± 1% 25 MHz MRFI85-R22NT 27 ± 2%, ± 5%, ± 1% 25 MHz MRFI85-R27NT 33 ± 2%, ± 5%, ± 1%, 25 MHz MRFI85-R33NT 39 ± 2%, ± 5%, ± 1% 25 MHz MRFI85-R39NT 4 sales@venkel.com Phone: Toll Free: Web:
6 85 (Ferrite Core) 47 ± 5%, ± 1% 25 MHz MRFI85-R47NT 56 ± 5%, ± 1% 25 MHz MRFI85-R56NT 68 ± 5%, ± 1% 25 MHz MRFI85-R68NT 82 ± 5%, ± 1% 25 MHz MRFI85-R82NT ± 5%, ± 1% 25 5 MHz MRFI85-1RNT 12 ± 5%, ± 1% MHz MRFI85-1R2NT 15 ± 5%, ± 1% MHz MRFI85-1R5NT 18 ± 5%, ± 1% MHz MRFI85-1R8NT 22 ± 5%, ± 1% MHz MRFI85-2R2NT 27 ± 5%, ± 1% MHz 3.5 MRFI85-2R7NT 33 ± 5%, ± 1% MHz MRFI85-3R3NT 39 ± 5%, ± 1% MHz MRFI85-3R9NT 47 ± 5%, ± 1% MHz MRFI85-4R7NT 56 ± 5%, ± 1% MHz MRFI85-5R6NT 68 ± 5%, ± 1% MHz MRFI85-6R8NT 82 ± 5%, ± 1% MHz MRFI85-8R2NT ± 5%, ± 1% MHz 5. 8 MRFI85-NT sales@venkel.com Phone: Toll Free: Web: 5
7 8 (Ceramic Core) 3.3 ±.2nH, ±.3nH MHz 6.6 MRFI8-3N3NT 6.8 ±.2nH, ± 5%, ± 1% MHz 55.6 MRFI8-6N8NT 8.2 ±.2nH, ± 5%, ± 1% MHz 55.6 MRFI8-8N2NT 1. ± 2%, ± 5%, ± 1% MHz 43.8 MRFI8-1NNT 12. ± 2%, ± 5%, ± 1% 5 MHz 36.8 MRFI8-12NNT 15. ± 2%, ± 5%, ± 1% 5 MHz 27.8 MRFI8-15NNT 18. ± 2%, ± 5%, ± 1% 35 MHz 27.1 MRFI8-18NNT 22. ± 2%, ± 5%, ± 1% 35 MHz 25.1 MRFI8-22NNT 27. ± 2%, ± 5%, ± 1% 35 MHz 18.1 MRFI8-27NNT 33. ± 2%, ± 5%, ± 1% 35 MHz 17.1 MRFI8-33NNT 39. ± 2%, ± 5%, ± 1% 35 MHz 15.1 MRFI8-39NNT 47. ± 2%, ± 5%, ± 1% 35 MHz 15.1 MRFI8-47NNT 56. ± 2%, ± 5%, ± 1% 35 MHz MRFI8-56NNT 68. ± 2%, ± 5%, ± 1% 35 MHz MRFI8-68NNT 82. ± 2%, ± 5%, ± 1% 35 MHz 1.18 MRFI8-82NNT ± 2%, ± 5%, ± 1% 35 MHz 1.18 MRFI8-R1NT 12 ± 2%, ± 5%, ± 1% 25 MHz MRFI8-R12NT 15 ± 2%, ± 5%, ± 1% 25 MHz MRFI8-R15NT 18 ± 2%, ± 5%, ± 1% 25 MHz MRFI8-R18NT 22 ± 2%, ± 5%, ± 1% 25 MHz MRFI8-R22NT 27 ± 2%, ± 5%, ± 1% 25 MHz MRFI8-R27NT 33 ± 2%, ± 5%, ± 1% 25 MHz MRFI8-R33NT 39 ± 2%, ± 5%, ± 1% 25 MHz MRFI8-R39NT 47 ± 2%, ± 5%, ± 1% 25 MHz MRFI8-R47NT 56 ± 2%, ± 5%, ± 1% 25 MHz MRFI8-R56NT 68 ± 2%, ± 5%, ± 1% 25 MHz MRFI8-R68NT 75 ± 2%, ± 5%, ± 1% 25 MHz MRFI8-R75NT 82 ± 2%, ± 5%, ± 1% 25 MHz MRFI8-R82NT 91 ± 2%, ± 5%, ± 1% 25 MHz MRFI8-R91NT ± 2%, ± 5%, ± 1% 25 5 MHz MRFI8-1RNT 6 sales@venkel.com Phone: Toll Free: Web:
8 8 (Ferrite Core) 12 ± 5%, ± 1% MHz MRFI8-1R2NT 15 ± 5%, ± 1% MHz MRFI8-1R5NT 18 ± 5%, ± 1% MHz MRFI8-1R8NT 22 ± 5%, ± 1% MHz MRFI8-2R2NT 27 ± 5%, ± 1% MHz MRFI8-2R7NT 33 ± 5%, ± 1% MHz MRFI8-3R3NT 39 ± 5%, ± 1% MHz MRFI8-3R9NT 47 ± 5%, ± 1% MHz MRFI8-4R7NT 56 ± 5%, ± 1% MHz MRFI8-5R6NT 68 ± 5%, ± 1% MHz MRFI8-6R8NT 82 ± 5%, ± 1% MHz MRFI8-8R2NT ± 5%, ± 1% MHz MRFI8-NT 12 ± 5%, ± 1% MHz MRFI8-12NT 15 ± 5%, ± 1% MHz MRFI8-15NT 18 ± 5%, ± 1% MHz MRFI8-18NT 22 ± 5%, ± 1% MHz MRFI8-22NT 27 ± 5%, ± 1% MHz MRFI8-27NT 33 ± 5%, ± 1% MHz MRFI8-33NT 39 ± 5%, ± 1% MHz MRFI8-39NT 47 ± 5%, ± 1% MHz MRFI8-47NT sales@venkel.com Phone: Toll Free: Web: 7
9 121 (Ceramic Core) 4.7 ±.2nH, ±.3nH MHz 6.6 MRFI121-4N7NT 5.6 ±.2nH, ± 5%, ± 1% MHz 55.8 MRFI121-5N6NT 1. ± 2%, ± 5%, ± 1% 5 MHz.6 MRFI121-1NNT 12. ± 2%, ± 5%, ± 1% 5 MHz 3.6 MRFI121-12NNT 15. ± 2%, ± 5%, ± 1% 5 MHz 32.6 MRFI121-15NNT 18. ± 2%, ± 5%, ± 1% 3 MHz 28.6 MRFI121-18NNT 22. ± 2%, ± 5%, ± 1% 3 MHz 2.8 MRFI121-22NNT 27. ± 2%, ± 5%, ± 1% 3 MHz 19.8 MRFI121-27NNT 33. ± 2%, ± 5%, ± 1% 3 MHz 17.8 MRFI121-33NNT 39. ± 2%, ± 5%, ± 1% 3 MHz 17.8 MRFI121-39NNT 47. ± 2%, ± 5%, ± 1% 3 MHz 1.8 MRFI121-47NNT 56. ± 2%, ± 5%, ± 1% 3 MHz 1.1 MRFI121-56NNT 68. ± 2%, ± 5%, ± 1% 3 MHz.1 MRFI121-68NNT 82. ± 2%, ± 5%, ± 1% 3 MHz.1 MRFI121-82NNT ± 2%, ± 5%, ± 1% 3 MHz 9.1 MRFI121-R1NT 12 ± 2%, ± 5%, ± 1% 5 3 MHz MRFI121-R12NT 15 ± 2%, ± 5%, ± 1% 5 3 MHz MRFI121-R15NT 18 ± 2%, ± 5%, ± 1% 5 3 MHz MRFI121-R18NT 22 ± 2%, ± 5%, ± 1% 5 3 MHz MRFI121-R22NT 27 ± 2%, ± 5%, ± 1% 5 3 MHz MRFI121-R27NT 33 ± 2%, ± 5%, ± 1% 5 3 MHz MRFI121-R33NT 39 ± 2%, ± 5%, ± 1% 5 MHz MRFI121-R39NT 47 ± 2%, ± 5%, ± 1% 5 MHz MRFI121-R47NT 56 ± 2%, ± 5%, ± 1% 5 MHz.9 45 MRFI121-R56NT 68 ± 2%, ± 5%, ± 1% 25 MHz MRFI121-R68NT 82 ± 2%, ± 5%, ± 1% 25 MHz MRFI121-R82NT ± 2%, ± 5%, ± 1% 25 MHz MRFI121-1RNT 12 ± 5%, ± 1% MHz MRFI121-1R2NT 15 ± 5%, ± 1% MHz MRFI121-1R5NT 18 ± 5%, ± 1% MHz MRFI121-1R8NT 22 ± 5%, ± 1% 5 MHz MRFI121-2R2NT 8 sales@venkel.com Phone: Toll Free: Web:
10 121 (Ferrite Core) 27 ± 5%, ± 1% MHz MRFI121-2R7NT 33 ± 5%, ± 1% MHz MRFI121-3R3NT 39 ± 5%, ± 1% MHz MRFI121-3R9NT 47 ± 5%, ± 1% MHz MRFI121-4R7NT 56 ± 5%, ± 1% MHz MRFI121-5R6NT 68 ± 5%, ± 1% MHz MRFI121-6R8NT 82 ± 5%, ± 1% MHz MRFI121-8R2NT ± 5%, ± 1% MHz MRFI121-NT 12 ± 5%, ± 1% MHz MRFI121-12NT 15 ± 5%, ± 1% MHz MRFI121-15NT 18 ± 5%, ± 1% MHz MRFI121-18NT 22 ± 5%, ± 1% MHz MRFI121-22NT 27 ± 5%, ± 1% MHz MRFI121-27NT 33 ± 5%, ± 1% MHz MRFI121-33NT 39 ± 5%, ± 1% MHz MRFI121-39NT 47 ± 5%, ± 1% MHz MRFI121-47NT 27 ± 5%, ± 1% MHz MRFI121-27NT 33 ± 5%, ± 1% MHz MRFI121-33NT 39 ± 5%, ± 1% MHz MRFI121-39NT 47 ± 5%, ± 1% MHz MRFI121-47NT sales@venkel.com Phone: Toll Free: Web: 9
11 Electrical Characteristics L vs. Freq. 8 2 (5) 12 Q vs. Freq. L N 19N 12N 5N6 1N Q N6 27N 12N 19N 1N L L vs. Freq. R12 68N 33N 22N 12N 3N9 63 (168) Q Q vs. Freq. 33N 22N 12N 3N9 68N R12 L vs. Freq. R22 85 (212) 12 Q vs. Freq. L 1 R1 47N 12N Q N 4N7 47N R1 4N7 2 R22 1 L 1 1 L vs. Freq. R33 R1 47N 18N 3N2 8 (252) Q Q vs. Freq. 3N3 18N 47N R1 R sales@venkel.com Phone: Toll Free: Web:
12 Electrical Characteristics L vs. Freq. 121 (3225) 12 Q vs. Freq. L 1R R47 R1 47N Q 8 6 4N7 47N 1 1 4N7 2 1R R47 R1 Tape and Reel Specifications Unit: mm Tape Width 8mm 12mm A 178 ± ± 2 Reel B 5 ± 1 5 ± 1 C 13. ± ±.5 E C D 21. ± ±.8 E 2. ±.5 2. ±.5 W 1. ± ± 1. R D A B t 1.2 ±.5 2. ±.5 R t W P1 P2 P Carrier Tape D E t Paper Tape W F B A t Embossed Tape Unit: mm Size Tape Paper Tape Embossed Tape Embossed Tape Embossed Tape Embossed Tape W 8. ±.2 8. ±.2 8. ±.2 8. ±.2 8. ±.2 F 3.5 ± ± ± ± ±.5 E 1.75 ± ± ± ± ±.1 P 1 2. ±.5 4. ±.1 4. ±.1 4. ±.1 4. ±.1 P 2 2. ±.5 2. ±.5 2. ±.5 2. ±.5 2. ±.5 P 4. ±.1 4. ±.1 4. ±.1 4. ±.1 4. ±.1 D 1.5 ± ± ± ± ±.1 A.7 ±.1 1. ± ± ± ±.1 B 1.15 ± ± ± ± ±.1 t max "-" 1.15 ± ± ±.1 2. ±.1 Qty/Reel 1, 3, 2, 2, 2, sales@venkel.com Phone: Toll Free: Web: 11
Low Value Multilayer Inductors (LMCI Series)
Structure Features: RoHS Compliant and Halogen Free Closed magnetic circuit configuration avoids crosstalk and is suitable for high density PCBs Size range: 0201, 05, 1608 Perfect shape for automatic mounting
Διαβάστε περισσότεραCurrent Sense Metal Strip Resistors (CSMS Series)
Features: Range: 1mΩ to 100mΩ Low TCR as low as 75PPM High power rating Custom Values available RoHS Compliant and Halogen Free Operating Temperature: -55 C to +170 C Part Number Structure CSMS 0805 -
Διαβάστε περισσότεραMultilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Διαβάστε περισσότεραWire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 2012 [0805] 2520 [1008] 3216 [1206] 3225 [1210]
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -4 ~+85 FEATURES Small chip suitable for surface mounting High inductance with ferrite material APPLICATIONS Video cameras, liquid crystal
Διαβάστε περισσότεραWire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 1608 [0603] 2012 [0805]
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -4 ~+85 FEATURES Small chip suitable for surface mounting High inductance with ferrite material APPLICATIONS Video cameras, liquid crystal
Διαβάστε περισσότεραSMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008
SMD Wire Wound Ferrite Chip Inductors - LS Series LS Series LS Series is the newest in open type ferrite wire wound chip inductors. The wire wound ferrite construction supports higher SRF, lower DCR and
Διαβάστε περισσότεραHIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
Διαβάστε περισσότεραHigh Frequency Ceramic Inductors TLNMH0603P Series
(1/5) High Frequency Ceramic Inductors Features High Q inductors for high frequency applications Multilayer Ceramic Optimal configuration for improved Q to 800MHz or higher 0.1nH step inductance values
Διαβάστε περισσότεραCal-Chip Electronics, Incorporated Multilayer Chip Inductors For High Frequency
Cal-Chip Electronics, Incorporated Multilayer Chip Inductors For High GHF SERIES FEATURES Multilayer inductor made of advanced ceramics with low-resistivity silver used as internal conductors provides
Διαβάστε περισσότεραRoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. PRODUCT DETAIL Electrical Characteristics μh L (Min) Q MHz (Min) SRF Ω DCR IDC ma TEST FREQ: MHz TEST LEVEL: 100 mv Test Instruments HP4291
Διαβάστε περισσότεραIWCSeries FEATURES APPLICATION ORDERING CODE TRIGON COMPONENTS. Configurations: Dimension (mm) IWC C G 1608 K 22N T (1) (2) (3) (4) (5) (6) (7)
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Διαβάστε περισσότεραYAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.
YAGEO CORPORATION SMD INDUCTOR / BEADS CLH Series Multilayer Chip Inductors High Frequency Lead-free / For High Frequency Applications APPLICATIONS RF Resonance and Impedance Matching Circuit RF and Wireless
Διαβάστε περισσότερα2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Διαβάστε περισσότεραSMD Shielded Power Inductors SPIA Series. SPIA Series. Product Identification
SPIA Series SPIA series is an automatic assembly constructed power inductor which is shielded with ferrite core. It is ideal for portable device DC-DC converter line. Features RoHS Compliant Miniature
Διαβάστε περισσότεραNPIS Shielded Power Inductors
FEATURES SHIELDED POWER INDUCTOR ULTRA LOW PROFILE (1.0 ~ 4.5mm MAX. HEIGHT) SURFACE MOUNTABLE CONSTRUCTION INDUCTANCE VALUES UP TO 220µH TAPED AND REELED FOR AUTOMATIC INSERTION CHARACTERISTICS Case Size
Διαβάστε περισσότεραConfigurations: Dimension (mm) B (max) A (max) 0.20 IWCCG1005. Inductance Range IWCCG ~ IWCCG ~ 1000 IWCCG
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Διαβάστε περισσότεραNo item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor
PART NUMBERING SYSTEM SI F 0805 K 780 F (1) (2) (3) (4) (5) (6) No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor (2) Type F Ferrite
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Διαβάστε περισσότεραDC-DC converter circuits for mobile phones, wearbale devices, DVCs, HDDs, etc.
Multilayer Chip Power Inductor MPH Series Operating Temp. : -40 ~+85 FEATURES Higher DC bias current and lower DC resistance due to Trench Technology Low profile and thin thickness Monolithic structure
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Διαβάστε περισσότεραSurface Mount Multilayer Inductor
FETURES 0603, 0805, 0806 ND 1008 CSE SIZES HIGH CURRENT ND LOW RESISTNCE NEW "S" VERSION FOR INCRESED STURTION CURRENT UGRDED "H" VERSION FOR HIGHEST CURRENT REFLOW SOLDERING LICBLE CKGE FOR UTOMTIC ICKLCE
Διαβάστε περισσότεραWire Wound Chip Ceramic Inductor SDWL-C Series Operating Temp. : -40 ~ N
Wire Wound Chip Ceramic Inductor SDWL-C Series Operating Temp. : -4 ~+25 FEATURES Small chip suitable for surface mounting High value and high self-resonant frequency with ceramic material Tight inductance
Διαβάστε περισσότεραSunlord Specifications subject to change without notice. Please check our website for latest information. Revised 2018/04/15
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Διαβάστε περισσότεραSMD Power Inductor-VLH
SMD Power Inductor-VH Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 321618C 3.2±0.3 1.6±0.2
Διαβάστε περισσότεραSunlord. Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) 2R2 SPH
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Διαβάστε περισσότεραHigh Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
Διαβάστε περισσότεραPb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. FEATURES The monolithic construction performs high reliability and ensures a closed magnetic flux in a component avoids magnetic and interference
Διαβάστε περισσότεραSCL Series. Multilayer Chip Ferrite Inductor
Multilayer Chip Ferrite Inductor Features 1 Monolithic structure for high reliability 2 Compact size inductor possible 3 No cross coupling due to magnetic shield 4 Perfect shape for mounting with no directionality
Διαβάστε περισσότεραWIRE WOUND CHIP INDUCTORS
FEATURES High Self-Resonance Frequency Stable inductance at high frequency Tight inductance tolerance High Q factory High current Low DCR APPLICATIONS Antenna amplifiers Mobile phone Key entry GPS (Global
Διαβάστε περισσότεραSMD Power Inductor-VLH
SMD Power Inductor-VH PAD AYOUT Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252510 2.5±0.2
Διαβάστε περισσότεραData sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Διαβάστε περισσότεραCurrent Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Διαβάστε περισσότεραAL Series - Thin Film Chip Inductor
Features A Photo Lithographic Single Layer Ceramic Chip High SRF, Excellent, Superior Temperature Stability Tight Tolerance of ± % or ±.nh Self Resonant Frequency Controlled within % Stable Inductance
Διαβάστε περισσότεραPRODUCT IDENTIFICATION SWPA 3012 S 1R0 N T
Wire Wound SMD Power Inductors SWPA Series Operating temperature range: -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded conruction reduces buzz noise to ultra-low levels Metallization
Διαβάστε περισσότεραData sheet Thin Film Chip Inductor AL Series
Data sheet Thin Film Chip Inductor AL Series Scope - 0201 and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and
Διαβάστε περισσότεραCSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Διαβάστε περισσότεραThin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Διαβάστε περισσότεραSMD Wire Wound Ferrite Chip Inductors - SQC Series. SQC Series. Product Identification. Shapes and Dimensions
SMD Wire Wound Ferrite Chip Inductors - SQC Series SQC Series These miniature chip inductors, SQC Series, wound on a special ferrite core and are excellent to be used as choke coil in DC power supply circuits.
Διαβάστε περισσότεραB37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Διαβάστε περισσότεραNPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
Διαβάστε περισσότεραMetal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Διαβάστε περισσότεραHigh Current Chip Ferrite Bead MHC Series
High Current Chip Ferrite Bead MHC Series Features Combination of high frequency noise suppression with capability of handing high current. The current rating up to 6 Amps with low DC. Applications High
Διαβάστε περισσότεραPolymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
Διαβάστε περισσότεραSunlord. Wire Wound SMD Power Inductors SWCS Series SWCS XXXX -XXX T. Operating Temperature: -25 ~ +105 FEATURES APPLICATIONS PRODUCT IDENTIFICATION
Wire Wound SMD Power Inductors SWCS Series Operating Temperature: -25 ~ +105 FEATURES Various high power inductors are superior to be high saturation Suitable for surface mounting equipment APPLICATIONS
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Διαβάστε περισσότεραMCB and MHC Series Chip Ferrite Bead for Automotive Applications Qualified based on AEC-Q200
RoHS MC and MHC Series Chip Ferrite ead for Automotive Applications Qualified based on AEC-Q200 Explanation of Part Number MC 1608 W 12 1 H P - 1 2 3 4 5 6 7 8 9 1. Series Name 2. Size Code: the first
Διαβάστε περισσότεραOperating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
Διαβάστε περισσότεραPower Inductor LVS Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering LVS 6645 L - 1R M - AU Series Name Dimensions Code Inductance Internal Code (mm) (uh) Tolerance 4412 4.x4.x1.2 L Low DCR R47.47 M ±% 4418 4.x4.x1.8
Διαβάστε περισσότεραPolymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
Διαβάστε περισσότεραC121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]
Multilayer Chip SDV Series Operating Temp. : -55 ~+125 FEATURES SMD type suitable for high density mounting Excellent clamping ratio and quick response time (
Διαβάστε περισσότεραRC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
Διαβάστε περισσότεραDATA SHEET Surface mount NTC thermistors. BCcomponents
DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Calchip s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Calchip s design provides high, excellent Q, and superior temperature stability. This highly
Διαβάστε περισσότεραTODA-ISU Corporation. SMD Power Inductor. SPI series. SMD Team
SMD Power Inductor SPI series TODA-ISU Corporation Advantages & Applications Advantages Low profile High current capability & Low DCR Low temperature rise Increased thermal efficiency Patent (Coil Integrated
Διαβάστε περισσότεραPolymer PTC Resettable Fuse: KMC Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. IA size: 0603, 0805, 1206, 1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small
Διαβάστε περισσότεραINPAQ Global RF/Component Solutions
MCB & MHC W Series Specification Product Name Series Multilayer Chip Ferrite Bead MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516 MCB and MHC Series Chip Ferrite Bead for Automotive Applications
Διαβάστε περισσότεραWIRE-WOUND CHIP INDUCTOR FERRITE/OPENTYPE
WIRE-WOUND CHIP INDUCTOR FERRITE/OPENTYPE 0805CS (2012) Ferrite Series (0.12~33µH) Part Number Inductance µh Percent Tolerance Q Min SRF Min MHz RDC Max Ohms IDC Max ma Color Code 0805CS-121E_FS 0.12@
Διαβάστε περισσότεραMultilayer Chip Inductor / CL TYPE
Multilayer Chip Inductor / CL TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no lead
Διαβάστε περισσότεραCeramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Διαβάστε περισσότεραCurrent Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
Διαβάστε περισσότεραUnshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
Διαβάστε περισσότερα+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
Διαβάστε περισσότεραISM 868 MHz Ceramic Antenna Ground cleared under antenna, clearance area mm x 8.25 mm. Pulse Part Number: W3013
W0 Datasheet version.. Ceramic Antenna. (0/08). Ceramic Antenna Ground cleared under antenna, clearance area 0.80 mm x 8.5 mm. Pulse Part Number: W0 Features - Omni directional radiation - Low profile
Διαβάστε περισσότεραChip Ferrite Bead MCB-S/B Series
Chip Ferrite Bead MCB-S/B Series Features Monolithic inorganic material construction Closed magnetic circuit avoids crosstalk SMD Type & suitable for reflow and wave soldering Available in various sizes
Διαβάστε περισσότεραThick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MW) THICK FILM ON ALUMINA SUSTRATE,
Διαβάστε περισσότεραDC-DC converter circuits for mobile phones, wearable devices, DVCs, HDDs, etc. MPH S R47 M T B01
Multilayer Chip Power Inductor MPH Series Operating emp. : -55 ~+25 FEAURES Higher DC bias current and lower DC resistance due to trench technology ow profile and thin thickness Monolithic structure for
Διαβάστε περισσότεραSMD - Resistors. Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612 official distributor of 1. Scope Thick Film Chip Resistor-SMDC Series -This specification applies
Διαβάστε περισσότεραAVX SMD Power Inductors
AVX SMD Power Inductors www.avx.com Version 14.7 Table of Contents LMax SMD Non-Shield Power Inductor LMXN Series Non-Shielded Style B 2-3 Inductance Range: 0.47-470 μh Rated Current: 0.53-30 A LMXN Series
Διαβάστε περισσότεραNTC Thermistor:TTC3 Series
Features. RoHS compliant 2. Halogen-Free(HF) series are available 3. Body size: Ф3mm 4. Radial lead resin coated 5. Operating temperature range: -40 ~+25 6. Wide resistance range 7. Cost effective 8. Agency
Διαβάστε περισσότεραSMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)
Marking Outline: Low DCR, high rated current. Magnetic shielded structure Lead free product, RoHS compliant. RoHS Carrier tape packing, suitable for SMT process. SMT Widely used in buck converter, laptop,
Διαβάστε περισσότερα1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat (Epoxy)
ARN series Thin Film High Precision Chip Resistor Features» Advanced thin film technology» Very tight tolerance down to ±0.01%» Extremely low TCR down to ±5ppm/» Wide resistance range 1ohm-3Mega ohm» Miniature
Διαβάστε περισσότεραYJM-L Series Chip Varistor
Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
Διαβάστε περισσότεραMULTILAYER CHIP VARISTOR JMV S & E Series: (SMD Surge Protection)
INTRODUCTION Metal Oxide based chip varistors (JMVs) are used for transient suppression. JMVs have non-linear - behavior, which is similar to that of Zener Diode. Each grain in JMV exhibits small p-n junction
Διαβάστε περισσότεραAluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Διαβάστε περισσότεραISM 900 MHz Ceramic Antenna Ground cleared under antenna, clearance area mm x 8.25 mm. Pulse Part Number: W3012
W0 Datasheet version.. Ceramic Antenna. (0/08). Ceramic Antenna Ground cleared under antenna, clearance area 0.80 mm x 8.5 mm. Pulse Part Number: W0 Features - Omni directional radiation - Low profile
Διαβάστε περισσότεραTHICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Διαβάστε περισσότερα1.575 GHz GPS Ceramic Chip Antenna Ground cleared under antenna, clearance area 4.00 x 4.25 mm / 6.25 mm. Pulse Part Number: W3011 / W3011A
W0 Datasheet version. ceramic antenna. (09/08).575 GHz Ceramic Chip Antenna Ground cleared under antenna, clearance area x 4.5 mm / 6.5 mm. Pulse Part Number: W0 / W0A Features - Omni directional radiation
Διαβάστε περισσότεραThick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512 official distributor of Thick Film Chip Resistor-SMDC Series 1. Scope -This specification applies to all
Διαβάστε περισσότεραCeramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Διαβάστε περισσότερα± 20% ± 5% ± 10% RENCO ELECTRONICS, INC.
RL15 RL16, RL17, RL18 MINIINDUCTORS CONFORMALLY COATED MARKING The nominal inductance is marked by a color code as listed in the table below. Color Black Brown Red Orange Yellow Green Blue Purple Grey
Διαβάστε περισσότεραMAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
Διαβάστε περισσότερα500mW Zener Diodes TZXJ2.0A TZXJ mW Zener Diodes. Features. Mechanical Data. Maximum Ratings (T Ambient=25ºC unless noted otherwise)
Features Planar Die Construction 500mW Power Dissipation Zener Voltage: 2.0V to 56V Ideally Suited for Automated Assembly Processes RoHS compliant and Halogen Free DO-35 Mechanical Data Case: Molded glass
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
Διαβάστε περισσότεραSurface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
Διαβάστε περισσότεραElectrical Specifications at T AMB =25 C DC VOLTS (V) MAXIMUM POWER (dbm) DYNAMIC RANGE IP3 (dbm) (db) Output (1 db Comp.) at 2 f U. Typ.
Surface Mount Monolithic Amplifiers High Directivity, 50Ω, 0.5 to 5.9 GHz Features 3V & 5V operation micro-miniature size.1"x.1" no external biasing circuit required internal DC blocking at RF input &
Διαβάστε περισσότεραAluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
Διαβάστε περισσότεραInductor. TCRC Radial Series Choke Inductor - / 扼流线圈电感器 of 07
TCRC Radial Series Choke Inductor - / 扼流线圈电感器 Features Open Magnetic circuit construction. Low cost and high reliability. Applications Notebook, Notebook, Inkjet printer, Copying machine, Display monitor,
Διαβάστε περισσότεραSMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
Διαβάστε περισσότεραSMD Transient Voltage Suppressors
SMD Transient Suppressors Feature Full range from 0 to 22 series. form 4 to 60V RMS ; 5.5 to 85Vdc High surge current ability Bidirectional clamping, high energy Fast response time
Διαβάστε περισσότεραRF series Ultra High Q & Low ESR capacitor series
RF series Ultra High Q & Low ESR capacitor series FAITHFUL LINK Features Application» High Q and low ESR performance at high frequency» Telecommunication products & equipments:» Ultra low capacitance to
Διαβάστε περισσότεραFerrite Chip Inductor
FTURS SURFC MOUNT CS SIZS (0402 ~ 1206) DURL MULTILYR CONSTRUCTION MGNTICLLY SHILDD TP & RL PCKGING FOR UTOMTIC INSRTION OTH FLOW ND RFLOW SOLDRL Pb-FR/RoHS COMPLINT SPCIFICTIONS Case NFI04 NFI06 NFI08
Διαβάστε περισσότεραMZ0.5GF SERIES ZENER DIODE TECHHICAL SPECIFICATION FEATURES. ABSOLUTE MAXIMUM RATINGE: (Ta=25 ) Parameter Symbols Limits Unit
MZ.GEV- THRU MZ.GEV-. MZ.GF SERIES MZ.GEV THRU MZ.GEV TECHHICAL SPECIFICATION FEATURES Silicon Planar Power Diodes Standard Voltage Tolerance is ±% DO- Glass Case High Reliability Weight: Approx..g DO-
Διαβάστε περισσότεραNKT NTC Thermistor. Negative Temperature Coefficient Thermistor FEATURES
FEATURES Large, strong capacity of suppression of inrush current Big material (B value), small residual Small size, Long life, high reliability and fast response APPLICATIONS Switching -supply, switch,
Διαβάστε περισσότεραLow Profile Inductors. Assembly Inductors
Content Low Profile Inductors Ordering Code...... 2 Product Range... 3 Molding Inductors (CPCMD Series)... 4 Standard External Dimensions... 4 Part Numbers & Characteristics... 6 Coating Inductors (CPCFN/H
Διαβάστε περισσότεραBluetooth / WLAN / WiFi Ceramic Chip Antenna Ground cleared under antenna, clearance area 4.00 x 4.25/6.25 mm. Pulse Part Number W3008, W3008C
W8 Datasheet version.7. ceramic antenna. (/) Ground cleared under antenna, clearance area 4. x 4.5/6.5 mm. Pulse Part Number W8, W8C Features - Omni directional radiation - Low profile - Compact size W
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
Διαβάστε περισσότεραTable of contents INDEX
Table of contents INDEX Quick Product Information... 2 Part Number Explanation and Coding Rule... 3 Wire Wound Ceramic Chip Inductors WLCW1005 Series... 4 Wire Wound Ceramic Chip Inductors WLCW1608 Series...
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Διαβάστε περισσότερα