Notice Inviting Applications for Pre-qualification

Transcript

1 Name of the work RAJIV GANDHI CENTRE FOR AQUACULTURE (MPEDA, MINISTRY OF COMMERCE & INDUSTRY, GOVT. OF INDIA) TECHNOLOGY TRANSFER TRAINING & ADMINISTRATIVE COMPLEX 3/197, POOMPUHAR ROAD, KARAIMEDU, SATTANATHAPURAM SIRKALI TALUK, NAGAPATTINAM DIST., TAMIL NADU Phone E mail rgcaho@gmail.com, engg.rgca@gmail.com Notice Inviting Applications for Pre-qualification Supply & Application of FOOD GRADE Epoxy Paint for the various installations that are used for rearing AQUATIC LIVE ORGANISMS IN SEA WATER, located at various places including Andaman & Nicobar islands Rajiv Gandhi Centre for Aquaculture (RGCA), a society of the Marine Products Export Development Authority (MPEDA), Govt. of India, invites Applications for Pre-qualification from manufacturers/authorized dealers who shall execute the work prescribed below. The applicants shall be reputed and experienced firms with proven technical and financial capabilities, possessing the required equipments with necessary expertise in the execution of prescribed work. Manufacturers/authorized dealers interested to prequalify themselves for this work are requested to ascertain their eligibility criteria furnished at the website of MPEDA ( and download Pre-Qualification forms. Filled in application in the prescribed form is to be submitted by the to the above address along with a non-refundable fee of Rs 1,000/- in the form of DD drawn in favour of Project Director, RGCA, payable at SBI, Mayiladuthurai, Nagapattinam district, Tamilnadu. The total estimated cost of the entire work is around Rs 100 Lakhs. 1

2 RAJIV GANDHI CENTRE FOR AQUACULTURE (MPEDA, MINISTRY OF COMMERCE & INDUSTRY, GOVT. OF INDIA) TECHNOLOGY TRANSFER TRAINING & ADMINISTRATIVE COMPLEX 3/197, POOMPUHAR ROAD, KARAIMEDU, SATTANATHAPURAM SIRKALI TALUK, NAGAPATTINAM DIST., TAMIL NADU Phone E mail rgcaho@gmail.com, engg.rgca@gmail.com PRODUCT CRITERIA Name of the work Supply & Application of FOOD GRADE Epoxy Paint for the various installations that are used for rearing AQUATIC LIVE ORGANISMS IN SEA WATER, located at various places including Andaman & Nicobar islands RGCA proposes to select two FOOD GRADE products viz. a) For application on sea water holding tanks (glossy finish) b) For application on working surfaces i.e floors (anti skid), walls (glossy) etc The FOOD GRADE epoxy should possess the following qualities in order to rear the living aquatic organisms 1. Leach proof The epoxy coat should not leach out of the product over time. The proposed product should act as an integral part to the structure and the paint shall not peel off nor emit any carcinogenic/harmful liquids, gases or odours into the stored sea water & air. 2. Non-toxic to living organisms The proposed epoxy paint shall be non-toxic to the organisms proposed to be reared in the sea water medium. 3. No toxic components The proposed epoxy paint shall not have any toxic or banned chemicals. 4. Sea Water Resistant The culture medium for our organisms being sea water, they shall be reared in the designated tanks which shall be coated with the proposed epoxy paint which shall be resistant to the saline medium and shall protect the substrate. 5. Chemical / Acid / UV resistant During the operation the surface shall be upon requirement disinfected with chemicals within permissible limits or other equipments, which the proposed epoxy paint shall be resistant to. 6. Curing period of 24 hrs or less The curing period for the proposed epoxy paint shall be a maximum of 24 hrs & shall be ready to be operated within 24 hrs of application. 7. Anti skid & Smooth/even surface The proposed epoxy paint to be coated on operational areas may be anti skid but shall have a smooth/even surface to maintain the biosecurity of the areas of application. 2

3 8. Direct application on moist surfaces The surface to be epoxy coated may not be necessarily dry during the execution of the project owing to the climatic condition at Andamans and also due to the trials/tests being conducted, if any. The proposed epoxy paint shall be suitable to be applied on moist surfaces. 9. Abrasion resistant During the operation the surface shall be upon requirement scrubbed or equipments used thereupon, which the proposed epoxy paint shall be resistant to. 10. Self levelling screed The proposed epoxy paint shall be preferably self-leveled on flat surfaces. On walls it must give an even finish 11. Protection against algae & fungus The surface proposed to be epoxy coated should deter the growth of algae or fungus. OTHER REQUIREMENTS & INFORMATION Τηε αππλιχατορ σηουλδ εξεχυτε α Προφορµα Γυαραντεε Βονδ φορ ατ λεαστ τηρεε ψεαρσ. Τηε αππλιχαντ σηουλδ ηαϖε υνδερτακεν σιµιλαρ νατυρε οφ ωορκ ωιτη ανψ Γοϖτ. οργανιζατιον/αγενχψ/πσυ. Τηε αππλιχαντ σηουλδ προδυχε εϖιδενχε οφ ηαϖινγ συχχεσσφυλλψ χοµπλετεδ ωορκσ οφ νοτ λεσσ τηαν Ρσ. 50 λακη ιν τηε λαστ τωο ψεαρσ. Φιλλεδ ιν αππλιχατιον ιν τηε πρεσχριβεδ φορµ αρε το βε συβµιττεδ βψ το τηε ΠΡΟϑΕΧΤ ΙΡΕΧΤΟΡ, ΡΓΧΑ, ιν τηε αβοϖε αδδρεσσ αλονγ ωιτη α νον ρεφυνδαβλε φεε οφ Ρσ 1000/ ιν τηε φορµ οφ δραων ιν φαϖουρ οφ Προϕεχτ ιρεχτορ, ΡΓΧΑ παψαβλε ατ ΣΒΙ, Μαψιλαδυτηυραι, Ναγαπαττιναµ διστριχτ, Ταµιλναδυ. οχυµεντσ προδυχεδ ιν συππορτ οφ προοφ φορ θυαλιφιχατιον σηουλδ βε σιγνεδ, σταµπεδ ανδ ενδορσεδ βψ α Γοϖερνµεντ Γαζεττεδ οφφιχερ. Ινχοµπλετε ανδ λατε αππλιχατιονσ ωιλλ βε συµµαριλψ ρεϕεχτεδ. ΡΓΧΑ ρεσερϖεσ τηε ριγητ το αχχεπτ ορ ρεϕεχτ ανψ πρε θυαλιφιχατιον αππλιχατιονσ ωιτηουτ ασσιγνινγ ανψ ρεασον τηερεοφ. Συβµισσιον οφ Πρε Θυαλιφιχατιον φορµσ δοεσ νοτ εντιτλε ινχλυσιον ιν τηε αππροϖεδ λιστ. ΙΜΠΟΡΤΑΝΤ ΝΟΤΙΧΕ ΠΡΕ ΘΥΑΛΙΦΙΕ ΑΠΠΛΙΧΑΝΤΣ ΑΡΕ ΡΕΘΥΙΡΕ ΤΟ ΕΜΟΝΣΤΡΑΤΕ ΤΗΕ ΕΠΟΞΨ ( αρκ Γρεψ Χολουρ) ΑΠΠΛΙΧΑΤΙΟΝ ΙΝ Α ΣΠΕΧΙΦΙΕ ΣΥΡΦΑΧΕ ΑΤ ΤΗΕΙΡ ΧΟΣΤ ΑΤ ΤΗΕ ΟΝΕ ΟΦ ΤΗΕ ΠΡΟϑΕΧΤ ΣΙΤΕ ΑΤ ΧΗΕΝΝΑΙ ΟΝ Α ΠΡΕΣΧΡΙΒΕ ΑΤΕ. ΤΗΕ ΘΥΑΛΙΤΨ ΟΦ ΤΗΕ ΕΠΟΞΨ ΑΠΠΛΙΧΑΤΙΟΝ ΕΜΟΝΣΤΡΑΤΕ ΩΙΛΛ ΒΕ ΕςΑΛΥΑΤΕ. ΟΝΛΨ ΤΗΟΣΕ ΑΠΠΛΙΧΑΝΤΣ ΘΥΑΛΙΦΨ ΙΝ ΤΗΕ ΕςΑΛΥΑΤΙΟΝ ΩΙΛΛ ΒΕ ΕΛΙΓΙΒΛΕ ΤΟ ΒΙ ΦΟΡ ΤΗΕ ΣΠΕΧΙΦΙΕ ΩΟΡΚΣ. 3

4 RAJIV GANDHI CENTRE FOR AQUACULTURE (MPEDA, MINISTRY OF COMMERCE & INDUSTRY, GOVT. OF INDIA) TECHNOLOGY TRANSFER TRAINING & ADMINISTRATIVE COMPLEX 3/197, POOMPUHAR ROAD, KARAIMEDU, SATTANATHAPURAM SIRKALI TALUK, NAGAPATTINAM DIST., TAMIL NADU Phone E mail rgcaho@gmail.com, engg.rgca@gmail.com FORM OF PRE-QUALIFICATION Name of the work Supply & Application of FOOD GRADE Epoxy Paint for the various installations that are used for rearing AQUATIC LIVE ORGANISMS IN SEA WATER, located at various places including Andaman & Nicobar islands Particulars to be furnished (in duplicate) for the purpose of pre qualification 1 Name of the Organization / Firm / Applicator 2 Postal Address & Contact No. 3 Address of Registered / Main Office 4 Year of establishment 5 Status of the Firm (Whether Company / Firm / Proprietary) 6 Name of Director/Partners/Proprietor i) i 7 Whether registered with Registrar of Companies / Registrar of Firms. If so, mention number and date. (Copy to be enclosed) 8 a) Name and address of Bankers i) i b) Enclose Solvency Certificate from the Scheduled Bankers (as per Annexure I) which should not be more than one month old) 9 Whether registered for Sales Tax purposes. If so, mention number date. Furnish also copies of Sales 4

5 Tax clearance Certificate. 10 Whether an assessee of Income Tax. If so, mention Permanent Account Number. Furnish copies of Income Tax clearance Certificate. 11 Furnish copies of audited balance sheet and Profit & Loss Account (audited) for the last three years. 12 i) i Financial resource of the Firm a. Paid up capital b. Working capital c. Average annual financial turn over for the last three years between , and Capacity to submit performance guarantees and security deposits. Whether any bank guarantee/security was invoked as a penalty measure in non-compliance of any assumed work in the last 10 years. If so furnish details. 13 If you are registered in the panel of other Organizations / Statutory bodies, Banks etc., furnish their names, category and date of registration. (Copy to be enclosed) 14 What are your fields of activities? Mention the fields on preference basis. i) i) 15 Detailed description and value of similar works done during last 2 years including Cost, Time Period, & Department/ Organization. (Supporting documents like Work Order, Completion Certificate etc. to be attached attested by a Govt Officer) 17 Furnish the names of three responsible persons who will be in a position to certify about the quality as well as past performance of your Organization. i) i 18 The details of Technical Staff / Work fore / Machinery etc., Note Where copies are required to be furnished these are to be certified copies preferably by the Concerned Agencies or a Government Officer. 19 Have you had any Legal / Arbitration / proceedings instituted in connection with works carried out by 5

6 you? If so furnished details. 20 Furnish photographs of important Projects carried out, if available 21 Facilities required by at site (i) Power Equipment (Electrical) ( (i Water Area of Site establishment required 22 List of subsidiary companies or supporting companies if any connected with your firm 23 Service Tax Index Number allotted 24 EPF A/C number allotted 25 ESI Code Number allotted/workmens Compensation Insurance on labourers engaged 26 License No. allotted under CLRA, Any other particulars the Organization / Firm / Applicator wish to furnish. 28 Authorised contact person of your firm 1. Name Signature Address Acceptance Certificate i) I / We certify that the information given above is true to the best of knowledge. I / We also understand that if any of the information is found wrong, I / We am/are liable to be debarred. Signature of applicant(s) Note The filled up applications should be submitted on or before , 5.00 P.M. to PROJECT DIRECTOR, RGCA, in the above address. The cover should be super scribed as The application for pre qualification for epoxy application. Late applications will not be considered. Date 6

7 AN-I Form of Solvency Certificate from a Scheduled Bank This is to certify that to the best of our knowledge and information M/s./Shri.having a customer of our Bank are / is respectable and can be trusted as good for any engagement upto a limit of Rs.(Rupees ). This Certificate is issued without any guarantee or responsibility to the Bank or any of the Officers. Authorised Signatory of the Bank with Seal Note In case of the contractor being other than a proprietor, ie. a Partnership firm or AOP, a private limited company etc., Certificate to include names of all Partners, director/s, as the case may be as recorded with the Bank. 7

8 CORRIGENDUM This is to inform the concerned that the last date of receipt of filled up applications for pre-qualification from manufacturers/authorized dealers of FOOD GRADE Epoxy Paint is on or before , 5.00 P.M as mentioned in the advertisement, information page etc. In the pre-qualification application it is inadvertently published as which may be ignored and read as PROJECT DIRECTOR RGCA 8