ΒΙΟΓΡΑΦΙΚΟ ΣΗΜΕΙΩΜΑ ΕΜΜΑΝ0ΥΗΛ Ε. Γ ΟΥΤΟΥ. Καθηγητού Πανεπιστηµίου Αντεπιστέλλοντος Μέλους της Ακαδηµίας Αθηνών

Transcript

1 ΒΙΟΓΡΑΦΙΚΟ ΣΗΜΕΙΩΜΑ ΕΜΜΑΝ0ΥΗΛ Ε. Γ ΟΥΤΟΥ Καθηγητού Πανεπιστηµίου Αντεπιστέλλοντος Μέλους της Ακαδηµίας Αθηνών ΞΑΝΘΗ, ΕΚΕΜΒΡΙΟΣ 2008

2 ΒΙΟΓΡΑΦΙΚΟ ΣΗΜΕΙΩΜΑ ΕΜΜΑΝΟΥΗΛ Ε. Γ ΟΥΤΟΥ Καθηγητής ιευθυντής του Εργαστηρίου Τεχνικής Μηχανικής Τµήµα Πολιτικών Μηχανικών ηµοκρίτειο Πανεπιστήµιο Θράκης Ξάνθη Τηλ: Fax: ΒΙΟΓΡΑΦΙΚΑ ΣΤΟΙΧΕΙΑ Ηµεροµηνία Γεννήσεως: Τόπος Γεννήσεως: Μυτιλήνη Λέσβου Οικογενειακή Κατάσταση: Έγγαµος, πατέρας δύο παιδιών ΤΙΜΗΤΙΚΕΣ ΘΕΣΕΙΣ Επιστηµονικός Εκδότης (Editor-in-Chief) του περιοδικού Strain An International Journal for Experimental Mechanics του εκδοτικού οίκου Blackwell Πρόεδρος της Ευρωπαϊκής Εταιρίας οµικής Ακεραιότητας των Κατασκευών (European Structural Integrity Society, (ESIS)), Πρόεδρος της Ευρωπαϊκής Ενώσεως Πειραµατικής Μηχανικής (European Association for Experimental Mechanics (EURASEM)), Πρόεδρος της Ελληνικής Εταιρίας Μηχανικής της Θραύσεως (ΕΕΜΗΘΡΑ), Μέλος της Ευρωπαϊκής Ακαδηµίας Επιστηµών και Τεχνών (European Academy of Sciences and Arts), 2001 Επίτιµο µέλος της Ιταλικής Εταιρίας Θραύσεως (Italian Group of Fracture), 2004 Εταίρος (Fellow) της Αµερικανικής Ακαδηµίας Μηχανικής (American Academy of Mechanics), 2006 Εταίρος (Fellow) της Εταιρίας Πειραµατικής Μηχανικής των ΗΠΑ (Society for Experimental Mechanics (SEM)), 2004 Εταίρος (Fellow) της Ακαδηµίας Επιστηµών της Νέας Υόρκης (New York Academy of Sciences), 2001 Εταίρος (Fellow) της Αµερικανικής Εταιρίας Μηχανολόγων Μηχανικών (American Society of Mechanical Engineers (ASME)), 1993 Ιδρυτικό µέλος της Ελληνικής Εταιρίας Θεωρητικής και Εφαρµοσµένης Μηχανικής (ΕΕΘΕΜ),

3 Μέλος της Επιτροπής Βραβείων της Εταιρίας Πειραµατικής Μηχανικής των ΗΠΑ (SEM), Μέλος της Επιτροπής Εταίρων της Εταιρίας Πειραµατικής Μηχανικής των ΗΠΑ (SEM), Πρόεδρος της Επιτροπής Εταίρων της Εταιρίας Πειραµατικής Μηχανικής των ΗΠΑ (SEM), Πρόεδρος της Επιτροπής Βραβείων της Ευρωπαϊκής Εταιρίας οµικής Ακεραιότητος των Κατασκευών (ESIS), Πρόεδρος της Επιτροπής Βραβείων της Ευρωπαϊκής Ενώσεως Πειραµατικής Μηχανικής (EURASEM), Μέλος ιοικούσης Επιτροπής της Εταιρίας Πειραµατικής Μηχανικής των ΗΠΑ (SEM), ΙΑΚΡΙΣΕΙΣ Μέλος της εκδοτικής επιτροπής των ακολούθων περιοδικών: Theoretical and Applied Fracture Mechanics Applied Composite Materials Advanced Composites Letters Experimental Mechanics The Archive of Mechanical Engineering of Polish Academy Facta Universitatis of the University of Nis Πρόεδρος του 16 ου Ευρωπαϊκού Συνεδρίου Θραύσεως (16 th European Conference of Fracture (ECF16)), Αλεξανδρούπολη, 3-7 Ιουλίου, 2006 Πρόεδρος του 13 ου Ευρωπαϊκού Συνεδρίου Πειραµατικής Μηχανικής (13 th International Conference on Experimental Mechanics (ICEM13)), Αλεξανδρούπολη, 1-6, Ιουλίου, 2007 Τιµήθηκε µε δύο βραβεία Fulbright για ερευνητική συνεργασία µε τα Πανεπιστήµια Lehigh (1985) and Northwestern (1995) των ΗΠΑ Τιµήθηκε µε το βραβείο του ιακεκριµένου Επισκέπτη Καθηγητή ( Distinguished Visiting Professorship Award ) του Πανεπιστηµίου του Τολέδου των ΗΠΑ, 1992 Αναφέρεται στις εκδόσεις: "Who's Who in the World," "International Who's Who of Intellectuals," "International Who's Who in Education," "Five Thousand Personalities of the World," Who s Who in Greece (1993, 1995), Who is Who in the World, Longman Who s Who," Who s Who in Science and Engineering" Μέλος της Εκδοτικής Επιτροπής της σειράς βιβλίων International Series on Advances in Fracture Mechanics, WIT Press Προσκεκληµένος εκδότης (Guest Editor) στα ειδικά τεύχη των περιοδικών: International Journal of Fracture, Vol. 79, No.2, pp , 1996 Applied Composite Materials, Vol. 3, No. 5, pp , 1996 International Journal of Fracture, Vol. 98, No 3-4, pp. i-xiii & , 1999 (αφιερωµένο στον Καθηγητή Π.Σ. Θεοχάρη) Facta Universitatis, Vol. 3, No 13, pp , 2003 Applied Composite Materials, Vol. 12, No. 3-4, pp ,

4 Μέλος του Συµβουλίου Κατασκευών και Υλικών (Member of the Structures and Materials Panel) της AGARD (Advisory Group for Aerospace Research and Technology), Μέλος του Οργανισµού NATO Research and Technology Organization, σήµερα Μέλος της Επιτροπής Έρευνας Συµβούλων και Εταίρος (Member of the Research Board of Advisors and Fellow) του American Biographical Institute Πρόεδρος του Τµήµατος Πολιτικών Μηχανικών του ηµοκριτείου Πανεπιστηµίου Θράκης, ιευθυντής του Τοµέα Σχεδιασµού και Κατασκευής των Κατασκευών κατά τα έτη: and Αντιπρόεδρος της Επιτροπής Ερευνών του ηµοκριτείου Πανεπιστηµίου Θράκης, Μέλος του ιοικητικού Συµβουλίου του Ιδρύµατος "Περικλή Σ. Θεοχάρη," σήµερα ΣΠΟΥ ΕΣ ίπλωµα Πολιτικού Μηχανικού του Εθνικού Μετσοβίου Πολυτεχνείου, Ιούνιος 1971 Αριστούχος ιδάκτωρ του Εθνικού Μετσοβίου Πολυτεχνείου, Ιούλιος1973 ΘΕΣΕΙΣ Βοηθός στο Εργαστήριο Αντοχής των Υλικών του Εθνικού Μετσοβίου Πολυτεχνείου Επιµελητής στην Έδρα Θεωρητικής και Εφηρµοσµένης Μηχανικής του Εθνικού Μετσοβίου Πολυτεχνείου Έκτακτος Καθηγητής στην Έδρα της Τεχνικής Μηχανικής του ηµοκριτείου Πανεπιστηµίου Θράκης Τακτικός Καθηγητής στην Έδρα της Τεχνικής Μηχανικής του ηµοκριτείου Πανεπιστηµίου Θράκης 1982-σήµερα Καθηγητής και ιευθυντής του Εργαστηρίου Τεχνικής Μηχανικής του ηµοκριτείου Πανεπιστηµίου Θράκης Επισκέπτης Καθηγητής του Πανεπιστηµίου Lehigh των ΗΠΑ Πρόεδρος του Τµήµατος Πολιτικών Μηχανικών του ηµοκριτείου Πανεπιστηµίου Θράκης Επισκέπτης Καθηγητής του Πανεπιστηµίου Northwestern των ΗΠΑ Επισκέπτης Καθηγητής του Πανεπιστηµίου Northwestern των ΗΠΑ Ι ΑΚΤΙΚΗ ΕΜΠΕΙΡΙΑ Εθνικό Μετσόβιο Πολυτεχνείο ( ) 4

5 Στατική, υναµική (προπτυχιακός κύκλος σπουδών) Αντοχή των Υλικών (προπτυχιακός κύκλος σπουδών) Η Μέθοδος των Μιγαδικών Συναρτήσεων στη Θεωρία Ελαστικότητας (µεταπτυχιακός κύκλος σπουδών) Πειραµατικές Μέθοδοι στην Ανάλυση των Τάσεων (µεταπτυχιακός κύκλος σπουδών) ηµοκρίτειο Πανεπιστήµιο Θράκης (1977-σήµερα) Στατική υναµική (προπτυχιακός κύκλος σπουδών) Αντοχή των Υλικών (προπτυχιακός κύκλος σπουδών) Πειραµατική Μηχανική (µεταπτυχιακός κύκλος σπουδών) Μηχανική της Θραύσεως (µεταπτυχιακός κύκλος σπουδών) Θεωρία Ελαστικότητας (µεταπτυχιακός κύκλος σπουδών) Σύνθετα Υλικά (µεταπτυχιακός κύκλος σπουδών) Πανεπιστήµιο της Καλιφόρνιας, Santa Barbara (1986 χειµερινό τετράµηνο) Μηχανική της Θραύσεως (µεταπτυχιακός κύκλος σπουδών) Πανεπιστήµιο της Καλιφόρνιας Davis (1987 εαρινό τετράµηνο) Μηχανική της Θραύσεως (µεταπτυχιακός κύκλος σπουδών) Michigan Technological University (1988 φθινοπωρινό τετράµηνο) Στατική (προπτυχιακός κύκλος σπουδών) University of Toledo (1992 εαρινό και θερινό τετράµηνο) Μηχανική της Θραύσεως (µεταπτυχιακός κύκλος σπουδών) Πειραµατική Μηχανική (µεταπτυχιακός κύκλος σπουδών) Northwestern University ( ) Μηχανική των Υλικών (προπτυχιακός κύκλος σπουδών) Πειραµατική Ανάλυση των Τάσεων (µεταπτυχιακός κύκλος σπουδών) ΕΠΙΣΤΗΜΟΝΙΚΕΣ ΗΜΟΣΙΕΥΣΕΙΣ ηµοσίευσε 30 βιβλία και 198 επιστηµονικές εργασίες, που κατατάσσονται ως εξής: Βιβλία στα Ελληνικά: 11 Βιβλία στα Αγγλικά: 6 Εκδότης (Editor): 13 Εργασίες σε επιστηµονικά περιοδικά: 122 Εργασίες σε κεφάλαια βιβλίων: 10 Εργασίες σε άλλες εκδόσεις: 7 Εργασίες σε πρακτικά συνεδρίων: 59 ΑΝΑΦΟΡΕΣ 5

6 Έχει 635 αναφορές στο Science Citation Index, και εµφανίζεται φορές στην µηχανή αναζητήσεως Google. ΕΡΕΥΝΗΤΙΚΑ ΕΝ ΙΑΦΕΡΟΝΤΑ Μηχανική της θραύσεως Πειραµατική µηχανική Νανοτεχνολογία Σύνθετα υλικά Κατασκευές σάντουιτς ΠΡΟΣΦΑΤΑ ΕΡΕΥΝΗΤΙΚΑ ΕΝ ΙΑΦΕΡΟΝΤΑ Μηχανική της θραύσεως Κατασκευές σάντουιτς Θραύση και κόπωση ελαστοµερών υλικών Σύνθετα νανο-υλικά Επισκευή αεροσκαφών µε σύνθετα υλικά Σχεδιασµός και ανάλυση γέφυρας από σύνθετα υλικά ΕΡΕΥΝΗΤΙΚΑ ΠΡΟΓΡΑΜΜΑΤΑ 1. Failure Analysis of Structural Components by Yielding and/or Fracture, NATO Collaborative Research Grant (with Lehigh University), Αστοχία Κατασκευών λόγω Ρηγµατώσεως, ΠΑΕΤ, Γενική Γραµµατεία Έρευνας και Τεχνολογίας, Application of Strain Energy Density Method to Cracked Monolithic Aerospace Components, AGARD, Πρότυπα Συνθέτων Υλικών Ενισχυµένων µε Ίνες, ΠΕΝΕ, Γενική Γραµµατεία Έρευνας και Τεχνολογίας, Ανάπτυξη Προγράµµατος Μηχανικών, Υπουργείο Εθνικής Παιδείας και Θρησκευµάτων, Study of Environment Assisted Cracking by the Method of Caustics, NATO Collaborative Research Grant (with Louisiana State University), Evaluation of Fracture Mechanics Parameters in Human Bones by Caustics, NATO Collaborative Research Grant (with the University of Toledo), Επίδραση της ιατµητικής Αντοχής στο Μηχανισµό Αστοχίας Συνθέτων Υλικών, ΤΣΜΕ Ε, Erasmus Programme in Civil Engineering, ERASMUS, European Union, σήµερα 10. Composite Basic Design and Repair Technologies, AGARD, Υλικά και Κατασκευές στην Αεροναυπηγική, Ανθρώπινα ίκτυα για τη ιάδοση της Γνώσης στην Έρευνα και Ανάπτυξη, Γενική Γραµµατεία Έρευνας και Τεχνολογίας, Effect of Residual Stress and Interfacial Strength on Micromechanical Analysis and Damage Development in Ceramic Matrix Composites, AGARD, Fracture Mechanics in Engineering Curriculum, TEMPUS Structural Joint European Project, European Union,

7 14. Composite Patch Repair Methodology for Conventional Aircraft Structures, AGARD, Interfacial Shear Strength and Failure Mechanisms in Fiber Reinforced Polymer Matrix Composites, AGARD, Composite Repair of Metallic Structure for Aging Commercial Aircraft, BRITE, European Union, Design, Analysis and Construction of a Bridge Made of Composite Materials, Greek Secretariat of Research and Technology, Μεθοδολογία Επισκευής Γηρασµένων Αεροσκαφών µε Σύνθετα Υλικά, Γενική Γραµµατεία Έρευνας και Τεχνολογίας, Processing, Characterization and Modeling of Polymer/Clay Nanocomposites (σε συνεργασία µε το Πανεπιστήµιο Northwestern των ΗΠΑ,) Γενική Γραµµατεία Έρευνας και Τεχνολογίας, Manufacturing of Aircraft Structural Components by Implementing Flexible Resin Transfer Moulding Techniques in Innovative Nanocomposite Materials, Γενική Γραµµατεία Έρευνας και Τεχνολογίας, Ι ΑΚΤΟΡΙΚΕΣ ΙΑΤΡΙΒΕΣ Επέβλεψε τις ακόλουθες διδακτορικές διατριβές 1. Λ. Παπακαλιατάκης, "Ευσταθής και ασταθής διάδοση ρωγµών σε όλκιµα υλικά, N.K. Χατζητρύφων, "Συµβολή στη διάδοση ρωγµών σε τρισδιάστατα σώµατα, M.A. Καττής, "Άκαµπτα καµπυλόγραµµα εγκλείσµατα µε µερική σύνδεση σε ελαστική µήτρα, A. Ζαχαρόπουλος, "Ευσταθής διάδοση ρωγµών σε ελαστοπλαστικά υλικά, Κ. Θηραίος "Αστοχία ρηγµατωµένων ολκίµων δίσκων µε δύο συµµετρικές εγκοπές, 1991 (συνεπιβλέπων) 6. Λ. Βασιλειάδης, "Συµβολή στον προσδιορισµό του πεδίου των τάσεων στο άκρο ρωγµής και όλκιµη θραύση, A. Γιαννακοπούλου, " ιεπιφανειακή διατµητική αντοχή και µηχανισµοί αστοχίας σε συνθετα υλικά µε κεραµική µήτρα, Κ.. Κοντοµήτρος, "Σχεδιασµός και ανάλυση γέφυρας από σύνθετα υλικά 9.. Ράπτη, "Επισκευή µεταλλικών αεροσκαφών µε σύνθετα υλικά" 10. J. Abot, "Fabrication, Testing and Analysis of Composite Sandwich Beams, 2000 (συνεπιβλέπων) 11. Kuang-An Wang, "Failure Analysis of Sandwich Beams, 2000 (συνεπιβλέπων) 12. Kalaitzidis, P., Παραµόρφωση και αστοχία κατασκευών σάντουιτς Επέβλεψε πολλές διπλωµατικές εργασίες και υπήρξε συν-επιβλέπων και µέλος των εξεταστικών επιτροπών πολλών διδακτορικών διατριβών στα Πανεπιστήµια της Πάτρας, το Εθνικό Μετσόβιο Πολυτεχνείο και το Πανεπιστήµιο του Northwestern 7

8 ΜΕΛΟΣ ΕΠΙΣΤΗΜΟΝΙΚΩΝ ΕΤΑΙΡΙΩΝ 1. Society for Experimental Mechanics of U.S.A. (1975) 2. Optical Society of America (1977) 3. Ελληνική Εταιρία Θεωρητικής και Εφηρµοσµένης Μηχανικής - Μέλος της ιεθνούς Εταιρίας Θεωρητικής και Εφηρµοσµένης Μηχανικής (IUTAM )(1979) 4. American Society of Mechanical Engineers (1979, Εταίρος 1993) 5. Sigma Xi (1980) 6. New York Academy of Sciences (1980, Εταίρος 2001) 7. American Society of Civil Engineers (1984) 8. European Structural Integrity Society (αντιπρόσωπος της Ελλάδος, 1982, Πρόεδρος ) 9. Greek Association of Computational Mechanics (1995) 10. American Academy of Mechanics (2001) 11. American Society of Metals (2001) 12. Greek Group of Fracture (2003), Πρόεδρος (2003 σήµερα) 13. British Society for Strain Measurement (2004) 14. European Association for Experimental Mechanics (2003), Πρόεδρος ( ) ΚΡΙΤΗΣ ΕΠΙΣΤΗΜΟΝΙΚΩΝ ΠΕΡΙΟ ΙΚΩΝ 1. Applied Composite Materials 2. Applied Mechanics Reviews 3. Computational Mechanics 4. Engineering Fracture Mechanics 5. International Journal of Fracture 6. ASME Journal of Applied Mechanics 7. Theoretical and Applied Fracture Mechanics 8. Applied Composite Materials 9. Advanced Composites Letters 10. The Archive of Mechanical Engineering 11. Facta Universitatis 12. Experimental Mechanics 13. The Archive of Mechanical Engineering of Polish Academy 14. International Journal of Solids and Structures 15. Strain An International Journal for Experimental Mechanics ΟΡΓΑΝΩΤΗΣ ΣΥΝΕ ΡΙΩΝ 1. "Phase Interaction in Composite Materials, Patras, 22-28/8/1988, Συν-Πρόεδρος 2. "International Symposium on Mechanics and Physics of Energy Density, Xanthi, 17-20/7/1989, Πρόεδρος 3. Fourth Greek National Congress on Mechanics, Xanthi, 26-29/6/1996, Πρόεδρος 8

9 4. First Hellenic Conference on Composite Materials and Structures, Xanthi, 2-5/7/1997, Πρόεδρος 5. "Recent Advances in Mechanics," Xanthi, 4-6/7/1998, Πρόεδρος 6. "International Symposium on Recent Advances in Mechanics - In Honor of Prof. A.N. Kounadis," 25/11/2000, Συν-Πρόεδρος 7. "Symposium on Recent Advances in Mechanics - In Honor of I.M. Daniel, 14th US National Congress of Applied Mechanics, Virginia Tech., Blacksburg, USA, 23-28/6/2002, Πρόεδρος 8. Symposium on Recent Advances in Composite Materials In Honor of S.A, Paipetis, Democritus University of Thrace, Xanthi, 12-14/6/2003, Πρόεδρος th European Conference of Fracture, Democritus University of Thrace, Alexandroupolis, 3-7/7/2006, Πρόεδρος th European Conference of Experimental Mechanics (ICEM13), Democritus University of Thrace, 2007, Πρόεδρος ΟΜΙΛΙΕΣ 1. "Photoelasticity," Εθνικό Μετσόβιο Πολυτεχνείο, 8/3/1972 and 15/3/ "New Photoelastic Methods," Εθνικό Μετσόβιο Πολυτεχνείο, 22/7/ "The Scattered Light Method in Stress Analysis," Εθνικό Μετσόβιο Πολυτεχνείο, 26/7/ "The Use of the Generalized Photoelastic Law of Neumann-Maxwell for the Direct Solution of the Plane Stress Problem, Εθνικό Μετσόβιο Πολυτεχνείο, 10/4/ "Matrix Formulation of Photoelasticity, ηµοκρίτειο Πανεπιστήµιο Θράκης, 2/4/ "Matrix Description of Polarized Light with Applications to Photoelasticity", University of Maryland, Maryland, U.S.A., 29/8/ "New Formulation of Three Dimensional Photoelasticity, Grumann Corporation, New York, U.S.A., 10/8/ The Strain Energy Density Theory for Unstable Crack Growth, Grumann Corporation, NY, U.S.A., 1/12/ "Fracture and/or Yielding of a Uniformly Loaded Beam Structure, Lehigh University, 30/3/ "Prediction of Stable Crack Growth by the Strain Energy Density Criterion, Dept. Civil Engng, School of Engng, City College of City University of New York, 29/6/ "Fracture Toughness Characterized by the Strain Energy Density Criterion, Division of Structural Mechanics, The Norwegian Institute of Technology, 17/10/ "Dependence of Crack Growth on Load Time Record, Institute of Fracture and Solid Mechanics, Lehigh Univ., 30/7/ "Some Problems in Fracture Mechanics, Dept. of Mechanical Engineering and Engineering Mechanics", Michigan Technological University, 10/8/ "The Method of Caustics in Environmental Cracking, Dept. of Mechanical Engineering and Engineering Mechanics, Michigan Technological University, 11/1/ "Environmental Cracking under Mixed-Mode Conditions, Dept. of Mechanical Engineering and Engineering Mechanics, Michigan Technological University, 18/1/1985 9

10 16. "Developments in Non-Linear Fracture Mechanics, Dept. of Theoretical Mechanics, University of Nottingham, 22/4/ "Advances in Non-Linear Fracture Mechanics, California Institute of Technology, 17/9/ "Ductile Fracture by the Strain Energy Density Theory, Aerospace Corp. Los Angeles CA, 19/9/ "Fracture Mechanics: A New Tool for Structural Design, Univ. of Thessaloniki, 9/12/1985 and 10/12/ "The Methods of Photoelasticity, Moire and Caustics in Experimental Stress Analysis, Dept. of Mechanical Engineering, University of California at Santa Barbara, 9/1/1986 and 16/1/ "Mechanics of Non-Linear Crack Growth - Two and Three Dimensional Problems", Dept. of Civil Engineering, University of California at Davis, 9/6/ Initiation, Stable and Unstable Crack Growth Studied by the Strain Energy Density Theory", Institute of Theoretical and Applied Mechanics of the Czechoslovak Academy of Sciences, 23/11/ "Fracture Mechanics and Strain Energy Density Theory, Dept. of Mechanical Engineering, University of Toledo, 14/10/ "Failure Initiation from Rigid Inclusions Embedded in an Elastic Matrix, Michigan Technological University, 25/10/ "Thermal/Mechanical Damage of Solids Studied by the Strain Energy Density Theory, Air Force Office of Aerospace Research, Washington D.C., 31/10/ "The Optical Method of Caustics. Theory and Applications", Workshop on Industrial Application of Optical Methods, Institute of Fracture and Solid Mechanics, Taipei (20 hours seminar), 27/2 to 3/3/ "Elasticity Solutions of Rigid Inclusions Partially Bonded to a Matrix and Applications to Fracture", Instituto Superior Tecnico, Lisbon, 8/5/ "Applications of the Method of Caustics to Problems of Fracture Mechanics, Instituto Superior Tecnico, Lisbon, 9/5/ "The Method of Caustics: Theory and Applications, Imperial College of Science and Technology, London, 11/5/ "Solution of Problems of Fracture Mechanics by the Method of Caustics," Slovak Academy of Sciences, Bratislava, 17/5/ "Elasticity Solutions of Inclusion Problems, Technical University of Bratislava, 18/5/ "Micromechanical Analysis of Nonlinear Thermal and Mechanical Deformation of Filamentary Metal Matrix Composites, Dept. of Mechanical Engineering, Louissiana, State University, 7/5/ Evaluation of Stress Intensity Factors Crack Problems by the Method of Caustics. Limits of Applicability of the Method, Lehigh University, 27/11/ New Materials and Fracture Mechanics, University of Thessaloniki, 27/2/ The Influence of Particle/Matrix Debonding on the Stress-Strain Behavior of Particulate Composites, in AGARD SMP Specialist s Meeting on Debonding/Delamination of Composites, Patras, 26/5/ The Optical Method of Caustics as Applied to Fracture Mechanics, The University of Toledo, 4/6/

11 37. Fracture and Composites, in Conference on New Directions in Mechanics, Thessaloniki,, 18/12/ Guidelines for Applying the Method of Caustics in Crack Problems, Politechnika Swietokrzyska, Kielce, 4/3/ Limitations of Applicability of the Method of Caustics in Fracture Mechanics Problems, Dept. of Mathematics-Mechanics-Informatics, University of Warsaw, 8/3/ The Methods of Photoelasticity, Moire and Caustics - Engineering Applications, Workshop on Applied Experimental Mechanics, Athens, 31/5/ Advances in the Optical Method of Caustics, Department of Theoretical Mechanics, Faculty of Engineering, University of Nottingham, 7/3/ Fracture Mechanics Technology in Engineering Applications, University of Thessalia, Volos, Greece, 26/5/ Micromechanical Analysis of the Thermomechanical Behavior of Composite Materials,, National Technical University of Athens, Athens, 29/3/ Failure Mechanisms in Ceramic Matrix Composites, Czech Academy of Sciences, Institute of Fundamental Technological Research, 6/5/ Failure Mechanisms in Brittle Matrix Composites, Drexel University, USA, 25/11/ Failure of Ceramic Matrix Composites, University of California at San Diego, USA, 18/12/ Failure Analysis of Ceramic Matrix Composites, University of Sheffield, England, 9/11/ Stress and Failure Analysis of Brittle Matrix Composites, in Exploiting Solutions to Practical Problems in Structural Composite Materials by the Application of Physically- Based Finite Element Models, Cambridge, England, 28-30/9/ "Failure Modes of Composite Sandwich Beams, Illinois Institute of Technology, USA, 1/11/ "Failure Modes of Composite Sandwich Beams, Michigan Technological University, USA,, 16/11/ "Sandwich Beams," Lehigh University, 16/11/ "Polymer/Clay Nanocomposites," University of Texas at Brownsville, USA, 1/2/2002, Distinguished Lecture. 53. Fiber-reinforced Composite and Particulate Nanocomposite Sandwich Structures. University of Texas at Brownsville, USA, 11/12/2002, Distinguished Lecture. 54. Fundamentals of Fracture Mechanics, Louisiana State University, USA, 13/2/ Sandwich Structures, Tampere University, Tampere, Finland. 31/3/ Fracture Mechanics of Concrete, Northwestern University, USA, 26/5/ Failure of Composite Sandwich Structures, National Conference of the Italian Group of Fracture, Bologna, Italy, 16/6/2004, Opening Lecture. 58. Failure of Composite Sandwich Structures, Advances in Multi-Scale Modelling of Composite Material Systems and Components, Monterey, California, 30/9/2005, Plenary Lecture. ΣΥΜΜΕΤΟΧΗ ΣΕ ΣΥΝΕ ΡΙΑ 11

12 1. "Applied Mechanics Summer Conference, American Society of Mechanical Engineers, Rensselaer Polytechnic Institute, Troy, New York, U.S.A., 23-2/6/ "Sixth International Conference on Experimental Stress Analysis, Munchen, Germany, 18-22/9/ "Mixed-Mode Crack Propagation, US-Greek Seminar, Athens, Greece, 18-22/8/1980, Chairman of the VI Session 4. "Eighteenth Annual Meeting of the Society of Engineering Science, Brown University, Providence, Rhode Island, U.S.A., 2-4/9/ "Eleventh Southeastern Conference on Theoretical and Applied Mechanics, Huntsville, Alabama, U.S.A., 8-9/4/ "Second International Conference on Defects, Fracture and Fatigue, Mont Gabriel, Quebec, Canada, 30/5-5/6/1982. Chairman of the 7th Session 7. "103rd Winter Annual Meeting, The American Society of Mechanical Engineers, Phoenix, Arizona, U.S.A., 14-19/11/ "International Conference on Application of Fracture Mechanics to Materials and Structures,", Freiburg, Germany, 20-24/6/ "Second International Conference on Composite Structures", Paisley College of Technology, Scotland, 14-16/9/ "Engineering Applications of New Composites", University of Patras, Patras, Greece, 25-29/8/ "Workshop on Composite Material Response: Constitutive Relations and Damage Mechanisms, Paisley College of Technology, Scotland, 30/7-1/8/ "Phase Interaction in Composite Materials, (Vice-Chairman), The University of Patras, Patras, Greece, 22-27/8/ "International Symposium on Mechanics and Physics of Energy Density" (Co- Chairman with Prof. G.C. Sih) Xanthi, Greece, 16-20/7/ "International Symposium on Advanced Composites in Emerging Technologies," (Vice-Chairman), Patras, Greece, 2-24/8/ International Conference on Mixed-Mode Fracture and Fatigue," (member of the international committee), Vienna, Austria, 15-17/7/ th Meeting of the Structures and Materials Panel of AGARD, Specialist s Meeting on Debonding/Delamination of Composites and Workshop on Impact of Materials Defects on Engine Structures Integrity, Patras, Greece, 24-29/5/ th Meeting of the Structures and Materials Panel of AGARD, Specialist s Meeting on Smart Structures for Aircraft and Spacecraft and Workshop on Environmentally Safe and Effective Processes for Paint Removal, Lindau, Germany, 4-9/10/ New Directions in Mechanics and Materials, Thessaloniki, Greece, 17-19/12/ th Meeting of the Structures and Materials Panel of AGARD, Workshop on Integarted Airframe Design Technology and Workshop on Introduction of Ceramics into Aerospace Structural Composites, Antalya, Turkey, 19-23/4/ Advanced Technology on Design and Fabrication of Composite Material and Structures (Chariman of session Damage and Fracture), Torino, Italy, 24-28/5/ Applied Experimental Mechanics, (Vice Chairman), Athens, Greece, 31/5-1/6/ th Meeting of the Structures and materials Panel of AGARD, Workshop on Characterisation of Fibre Reinforced Titanium Matrix Composites and Workshop on 12

13 An Assessment of Fatigue Damage and Crack Growth Prediction Techniques, Bordeaux, France, 27/9-1/10/ Mechanics of Materials and Microstructures, Thessaloniki, Greece, 1-20/12/ th Meeting of the Strucures and Materials Panel of AGARD, Specialist s Meeting on Impact of Acoustic Loads on Aircraft Structures and Workshop on Aircraft Loads Due to Turbulence and Their Impact on Design and Certifications, Lillehammer, Norway, 1-6/5/ th Meeting of the Structures and materials Panel of AGARD, Specialist s Meeting on Composite Repair of Military Aircraft Structures and Specialist s Meeting on Corrosion Detection and Management of advanced Airframe Materials, Seville, Spain, 3-7/10/ th Meeting of the Structures and Materials Panel of AGARD, Specialist s Meeting on Advanced Aeroservoelastic Testing and Data Analysis and Specialist s Meeting on Widespread Fatigue Damage in Military Aircraft, Rotterdam, The Netherlands, 8-12/5/ SEM Spring Conference and Exhibit, Grand Rapids, Michigan, U.S.A., 1-14/6/ Fourth Greek National Congress on Mechanics, (Co-Chairman), Xanthi, Greece, 2-29/6/ High Technology Composites in Modern Applications (Member of the Local Organizing Committee and the International Scientific Committee), Corfu, Greece, 18-22/9/ th Meeting of the Structures and Materials Panel of AGARD Specialist s Meeting on Thermal Mechanicall Fatigue of Aircraft Engine Materials and Workshop on The Design, Qualification and Maintenance of Vibration-Free Landing Gear, Banff, Canada, 2-6/10/ nd Meeting of the Structures and Materials Panel of AGARD, Specialist s Meeting on tribology for Aerospace Systems and Workshop on Integrated Airframe Design Technology, Sesimbra, Portugal, 6-10/5/ rd Meeting of the Structures and Materials Panel of AGARD, Specialist s Meeting on Bolted/Bonded Joints in Polymeric Composites, Workshop on Loads and Requirements for Military Aircraft and Workshop on Environmentally Compliant Surface Treatments of Materials for Aerospace Applications, Florence, Italy, 2-6/9/ "Wood in Existing Structures: Old and New Technologies, Thessaloniki, Greece, 27-28/2/ th Meeting of the Structures and Materials Panel of AGARD, Paris, France, 14-18/4/ Second International Conference of Civil Engineers, Toledo, Spain, 16-17/5/ Summer School on Failure in Structures, (Six-hours lectures), Kielce/Ameliüwka, Poland, 2-6/6/ First Hellenic Conference on Composite Materials and Structures, (Co-Chairman, Chairman of the Local Organizing Committee), Xanthi, Greece, 2-5/7/ th Meeting of the Structures and Materials Panel of AGARD, Aalborg, Denmark, 13-17/10/

14 39. Exploiting Solutions to Practical Problems in Structural Composite Materials by the Application of Physically-Based Finite Element Models, Cambridge, England, 28-30/9/ Fifth Greek National Congress on Mechanics, Ioannina, Greece, 27-30/8/ NATO RTO Meeting: Applied Vehicle Technology Panel Structural Fatigue in the Presence of Corrosion, Corfu, Greece, 5-9/10/ NATO RTO Meeting: Applied Vehicle Technology Panel New Metallic Materials for the Structure of Aging Aircraft, Corfu, Greece, 19-23/4/ "SEM VIII International Congress on Experimental Mechanics, Cincinnati, "SEM IX International Congress on Experimental Mechanics, Orlando, 5-8/6/ "ICTAM 2000, 20th International Congress of Theoretical and Applied Mechanics, Chicago, 27/8-2/3/ "International Symposium on Recent Advances in Mechanics-In Honor of Prof. A.N. Kounadis", Athens, 25/11/2000 (Co-Chairman) 47. "SEM X International Congress on Experimental Mechanics", Portland, Oregon, 4-6/6/ Sixth Greek National Congress on Mechanics, Thessaloniki, Greece, 19-21/7/ "10 th International Congress on Fracture," Honolulu, Hawaii, 3-7/12/ "15 th General Assembly and Annual Festive Plenary Session of the European Academy of Sciences and Arts," Salzburg, Austria, 9/3/ "2002 SEM Annual Conference & Exposition on Experimental and Applied Mechanics," Milwaukee, Wisconsin, 10-12/6/ "14 th US National Congress of Applied Mechanics," Virginia Tech., Blacksburg, Virginia, 23-28/6/ "14 th European Conference on Fracture ECF 14," Cracow, Poland, 8-13/9/ "International Symposium in Multiscaling in Mechanics," Messini, Greece, 2-6/9/ th International Symposium on Advanced Composites, Corfu, Greece, 5-7/5/ Cumulative Fatigue Damage, Seville, Spain, 26-30/5/ "2003 SEM Annual Conference & Exposition on Experimental and Applied Mechanics," Charlotte, North Carolina, 2-4/6/ Recent Advances in Composite Materials In Honor of S.A. Paipetis, Democritus University of Thrace, Xanthi, Greece, 12-14/6/ SEM X International Congress, Costa Mesa, California, 6-10/6/ National Congress of the Italian Group of Fracture, Bologna, Italy, 16-18/6/ th European Conference of Fracture, Stockholm, Sweden, 11-13/8/ ICEM 12, International Conference on Experimental Mechanics, Bari, Italy, 29/8-2/9, th International Conference on Fracture - ICF11, Turin, Italy, 20-25/3/ SEM Annual Conference on Experimental and Applied Mechanics, Portland, Oregon, 7-9/6/ British Society for Strain Measurements Annual Conference on Advances in Experimental Mechanics, Southampton, UK, 6-8/9/2005, Πρόεδρος της Συνεδριάσεως Προσκεκληµένων Οµιλητών 66. Advances in Multi-Scale Modelling of Composite Material Systems and Components, Monterey, California, 25-30/9/

15 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, St Louis, Missouri, 5-7/6/ th European Conference of Fracture, Alexandroupolis, Greece, 3-7/7/2006. ΕΠΙΣΚΕΨΕΙΣ ΣΕ ΠΑΝΕΠΙΣΤΗΜΙΑ /7/1975, Dept. of Mechanical Engineering, University of Toledo, Ohio, U.S.A. 2. 1/7-31/8/1979, Dept. of Mechanical Engineering, University of Maryland, Maryland, U.S.A. 3. 1/7-10/8/1980, Dept. of Mechanical Engineering, University of Toledo 4. 3/8/ /8/1982, Institute of Fracture and Solid Mechanics, Lehigh University 5. 13/7-18/8/1983, Institute of Fracture and Solid Mechanics, Lehigh University 6. 10/10-25/10/1983, Structural Mechanics Division, The Norwegian Institute of Technology, Trondheim, Norway 7. 30/6-9/8/1984, Institute of Fracture and Solid Mechanics, Lehigh University 8. 23/12/ /1/1985, Dept. of Mechanical Engineering and Engineering Mechanics, Michigan Technological University, Houghton MI, U.S.A /6-21/9/1985, Institute of Fracture and Solid Mechanics, Lehigh University 10. 1/1-25/3/1986, Dept. of Mechanical Engineering, University of California at Santa Barbara, Santa Barbara CA, U.S.A /3-30/6/1986, Institute of Fracture and Solid Mechanics, Lehigh University 12. 1/4/-12/6/1987, Depts of Civil and Mechanical Engineering University of California at Davis, Davis, CA, U.S.A /8-20/11/1988, Dept. of Mechanical Engineering and Engineering Mechanics, Michigan Technological University /2-7/3/1989, Institute of Fracture and Solid Mechanics, Taipei, Taiwan, R.O.C /8/ /8/1990, Center for Quality Engineering and Failure Prevention, Northwestern University /3-31/7/1992, Dept. of Mechanical Engineering, University of Toledo 17. 1/7-31/7/1993, Center for Quality Engineering and Failure Prevention, Northwestern University 18. 1/7-31/7/1994, Center for Quality Engineering and Failure Prevention, Northwestern University 19. 5/7-31/8/1995, Center for Quality Engineering and Failure Prevention, Northwestern University 20. 5/7-25/8/1996, Center for Quality Engineering and Failure Prevention, Northwestern University /7-26/8/1997, Center for Quality Engineering and Failure Prevention, Northwestern University /7-24/8/1998, Center for Quality Engineering and Failure Prevention, Northwestern University ΕΠΙΣΚΕΨΕΙΣ ΣΕ ΠΑΝΕΠΙΣΤΗΜΙΑ ΜΙΚΡΗΣ ΙΑΡΚΕΙΑΣ 1. Open University, Academic Links and Interchange Scheme, British Council, United Kingdom, 14-20/9/

16 2. University of Trondheim and Research Center SINTEF, Trondheim, Norway, Programme of Cultural Exchanges, 10-25/10/ Universities of Surrey, Cambridge, Sheffield, Nottingham and Oxford, Academic Travel Grant, British Council, United Kingdom, 15-26/5/ Technical University of Brno, Slovak Academy of Sciences (Bratislava), Technical University of Bratislava, Institute of Theoretical and Applied Mechanics and of Geology of the Czechoslovakian Academy of Sciences, Technical University of Prague, Charles University of Prague, Czechoslovakia, Programme of Cultural Exchanges, 16-24/11/ Instituto Superior Tecnico, Lisbon, Portugal, 6-10/5/1989; Imperial College of Science and Technology and Polytechnic of Central London, 11-12/5/1989, Erasmus project No STV-88-G Technical University of Bratislava and Slovak Academy of Sciences, Bratislava, Czechoslovakia, 12-19/5/1989, Invited 7. Lehigh University, AGARD Project G-67, titled: Composite Basic Design and Repair Technologies, U.S.A., 26/11-8/12/ Northwestern University, AGARD Project G-67 titled: Composite Basic Design and Repair Technologies, U.S.A., 19/7-3/8/ Universities of Westminster, Reading, Swansea, Birmingham, Manchester, Bristol, Cambridge and Imperial College of Science, Technology and Medicine, Academic Grant, British Council, United Kingdom, 18/10-4/11/ University of Warsaw, Kielce University of Technology and Technical University of Krakow, Poland, Programme of Cultural Exchanges, 1-8/3/ Universities of Oxford, Surrey, Imperial College of Science, Technology and Medicine and Nottingham, National Physical Laboratory at Teddington, Wessex Institute of Technology and Defense Research Agency at Farnborough, United Kingdom, 23/2-9/3/ Universities of Oxford, Surrey and Nottingham, 24/2-28/2/1995, and Technical University of Delft, Erasmus project No STV-94-G-2021/P, 8-10/5/ Patuxent River Maryland Naval Air Station, and Naval Aviation Depot Cherry Point, AGARD Project G-67, titled: Composite Basic Design and Repair Technologies, U.S.A., 21-29/1/ Daimler Benz Aerospace, Munich, Germany and GMI, Paris, France,, AGARD Exploratory Visit, 25-29/4/ Fachhochschule fur Technik und Wirtschaft, Berlin, Erasmus Programme, 10-14/9/ Patuxent River Naval Air Station, National Institute of Standards & Technology, Naval Research Laboratory Washington DC, Center for Composite Materials University of Delaware, Drexel University and Lehigh University, 16-29/11/ Czech Academy of Sciences, 4-11/5/1997, Invited 18. Tampere Institute of Technology, Tampere, Finland, Ecological Constructions, Erasmus Progamme, 3-9/5/ Tampere Institute of Technology, Tampere, Finland, Erasmus Programme, 30/3-1/4/ Satakunta Polytechnic, Pori, Finland, Erasmus Programme, 1/4-6/4/

17 ΕΠΙΣΤΗΜΟΝΙΚΕΣ ΗΜΟΣΙΕΥΣΕΙΣ A. ΒΙΒΛΙΑ A1: Ελληνικά 1. Γδούτος, Ε.Ε., "Θεωρία και Έφαρµογαί της Φωτοελαστικότητος, σελ , Εθνικό Μετσόβιο Πολυτεχνείο, Γδούτος, Ε.Ε., "Μηχανική των Παραµορφωσίµων Σωµάτων Θεωρία Ελαστικότητος και Αντοχή των Υλικών, σελ. i-xv και 1-542, Έκδοτικός Οίκος Α/φων Κυριακίδη, Θεσσαλονίκη, Γδούτος, Ε.Ε., "Κινηµατική, σελ. i-x και 1-106, Έκδοτικός Οίκος Α/φων Κυριακίδη, Θεσσαλονίκη, Γδούτος, Ε.Ε. και Κάλφας, Χ., "Στατική - Ασκήσεις, Τοµ. I, σελ. i-xiii και 1-558, Εκδόσεις Συµµετρία, Αθήνα, Γδούτος, Ε.Ε. and Κάλφας, Χ., " Στατική - Ασκήσεις, Τοµ. ΙΙ, σελ. i-viii και 1-769, Εκδόσεις Συµµετρία, Αθήνα, Γδούτος, Ε.Ε. and Ζαχαρόπουλος,., "Προβλήµατα Θεωρίας Ελαστικότητας, σελ. i-xii και 1-318, Έκδοτικός Οίκος Α/φων Κυριακίδη, Θεσσαλονίκη, Γδούτος, Ε.Ε., "Στατική, σελ , Εκδόσεις Συµµετρία, Αθήνα, Γδούτος, Ε.Ε. and Κάλφας, Χ., "Αρχές Στατικής του Στερεού Σώµατος, Τοµ. I, σελ. i-xii and 1-480, Έκδοτικός Οίκος Α/φων Κυριακίδη, Θεσσαλονίκη, Γδούτος, Ε.Ε. and and Κάλφας, Χ., " Αρχές Στατικής του Στερεού Σώµατος," Τοµ. II, σελ. i-xii and 1-492, Έκδοτικός Οίκος Α/φων Κυριακίδη, Θεσσαλονίκη, Γδούτος, Ε.Ε., Θεωρία Ελαστικότητας, Εκδόσεις Συµµετρία, Αθήνα, σελ. Ι-ΧΙΙ και 1-448, Γδούτος, Ε.Ε., Αντοχή των Υλικών, Εκδόσεις Συµµετρία, Αθήνα, σελ.i-iv και 1-371, A2: Αγγλικά 1. Theocaris, P.S. and Gdoutos, E.E., "Matrix Theory of Photoelasticity, Springer Series in Optical Sciences, Vol. 11, pp. i-xi and 1-352, Springer Verlag, Gdoutos, E.E., "Problems of Mixed-Mode Crack Propagation, Martinus Nijhoff Pub lishers, pp. i-xiv and 1-204, Gdoutos, E.E., "Fracture Mechanics Criteria and Applications, pp. i-xii and 1-314, Kluwer Academic Publishers, Gdoutos, E.E., "Fracture Mechanics - An Introduction," pp. i-xiii and 1-307, Kluwer AcademicPublishers, Gdoutos, E.E., "Solutions Manual: Fracture Mechanics - An Introduction, pp. i-viii and 1-196, Kyriakidis Bros Publishers,

18 6. Gdoutos, E.E., Fracture Mechanics An Introduction, Second Edition, pp. i- xv and 1-369, Springer, A3: Εκδότης (Editor) 1. Sih, G.C. and Gdoutos, E.E., "Mechanics and Physics of Energy Density, pp. I-VIII and 1-209, Kluwer Academic Publishers, Theocaris P.S. and Gdoutos, E.E., Proceedings of the Fourth Greek National Congress on Mechanics, Vols I and II, pp. i-xvi and , Kyriakidis Bros Publishers, Paipetis, S.A. and Gdoutos, E.E., Proceedings of the First Hellenic Conference on Composite Materials and Structures, Vol. I, pp. i-xiv and 1-810, and Vol. II, pp. i-xvi and 1-238, Kyriakidis Bros Publishers, Gdoutos, E.E., Honorary Volume for Professor D.D. Raftopoulos, pp. i-xxvi and 1-562, Athanasopoulos and Papadamis Publishers, Kounadis, A.N. and Gdoutos, E.E., "Recent Advances in Mechanics - Abstracts, pp. i- viii and 1-102, Athanasopoulos and Papadamis Publishers, Gdoutos, E.E., Pilakoutas, K. and Rodopoulos, C.A., "Failure Analysis of Industrial Composite Materials, pp. i-xviii and 1-555, McGraw-Hill, Katsikadellis, J.T. Beskos, D.E. and Gdoutos, E.E., "Recent Advances in Applied Mechanics - Honorary Volume for Professor A.N. Kounadis, pp. i-xix and 1-349, National Technical University of Athens, Gdoutos, E.E., "Recent Advances in Experimental Mechanics - In Honor of Isaac M. Daniel, pp. i-xlvi and 1-798, Kluwer Academic Publishers, Gdoutos, E.E. and Z. P. Marioli-Riga, Recent Advances in Composite Materials - In Honor of. S. A. Paipetis, pp. i- xxviii and 1-381, Kluwer Academic Publishers, Gdoutos, E.E., Rodopoulos, C.A. and Yates, J.R., Problems of Fracture Mechanics and Fatigue A Solution Guide, pp. i-xxvi and 1-618, Kluwer Academic Publishers, Gdoutos, E.E., Fracture of Nano and Engineering Materials and Structures, Proceedings of the 16th European Conference of Fracture (ECF16), pp. i- l and , Springer, Gdoutos, E.E. and Andrianopoulos, N.P. Collected Papers of Pericles S. Theocaris, Introductory Volume & Volumes 1-10, 2006, to appear. 13. Gdoutos, E.E., (ed.) Experimental Analysis of Nano and Engineering Materials and Structures, Proceedings of the 13th International Conference on Experimental Mechanics (ICEM13), Springer, 2007, to appear. 18

19 B. ΕΠΙΣΤΗΜΟΝΙΚΕΣ ΕΡΓΑΣΙΕΣ 1. Γδούτου, Ε.Ε., Η Επίδρασις του Λόγου, της Ακτίνος προς το Πλάτος, Ορθογωνικού µε ύο Συµµετρικάς Ηµικυκλικάς Εγκοπάς ίσκου εις Εφελκυσµόν, επί της Εντατικής Καταστάσεως, Τεχνικά Χρονικά, Τοµ. 40, σελ , Theocaris, P.S. and Gdoutos, E.E., "An Optical Method for Determining Opening-Mode and Edge Sliding-Mode Stress Intensity Factors", Journal of Applied Mechanics, Vol. 39, Trans. ASME, Vol. 94, pp , Γδούτου, Ε.Ε., "Ελαστοπλαστικκή Ανάλυσις Ρηγµατωµένων Πλακών υπό Συνθήκας Επιπέδου Εντάσεως", ιατριβή επί ιδακτορία, Εθνικό Μετσόβιο Πολυτεχνείο, σελ. i-vii and 1-267, Theocaris, P.S. and Gdoutos, E.E., "An Interferometric Method for the Direct Evaluation of Principal Stresses in Plane-Stress Fields", Journal of Physics D: Appl. Physics, Vol. 7, pp , Theocaris, P.S. and Gdoutos, E.E., "Verification of the Validity of the Dugdale-Barenblatt Model by the Method of Caustics", Engineering Fracture Mechanics, Vol. 6, pp , Theocaris, P.S. and Gdoutos, E.E., "The Modified Dugdale-Barenblatt Model Adapted to Various Fracture Configurations in Metals", International Journal of Fracture, Vol. 10, pp , Γδούτου, Ε.Ε., "Η Χρήσις του Γενικευµένου Φωτοτασεοπτικού Νόµου Neumann- Maxwell δια τον Άµεσον Επίλυσιν του ιδιαστάτου Εντατικού Προβλήµατος," Επιστηµονικά Σεµινάρια του Εργαστηρίου Αντοχής Υλικών του Εθνικού Μετσοβίου Πολυτεχνείου, σελ , Theocaris, P.S. and Gdoutos, E.E., "The Size of Plastic Zones in Cracked Plates Made of Polycarbonate", Experimental Mechanics, Vol. 15, pp , Gdoutos, E.E. and Theocaris, P.S., "Stress Concentrations at the Apex of a Plane Indenter Acting on an Elastic Half-Plane", Journal of Applied Mechanics, Vol. 42, Trans. ASME, Vol. 97, pp , Theocaris, P.S. and Gdoutos, E.E., "A Photoelastic Determination of K I Stress Intensity Factors", Engineering Fracture Mechanics, Vol. 7, pp , Theocaris, P.S. and Gdoutos, E.E., "Surface Topography by Caustics", Applied Optics, Vol. 15, pp , Theocaris, P.S. and Gdoutos, E.E., "Stress Singularities at Equal Angle Biwedges and Two-Material Composite Half Planes with Rough Interfaces", Journal of Applied Mechanics, Vol. 43, Trans. ASME, Vol. 98, pp , Theocaris, P.S. and Gdoutos, E.E., "The Bimaterial Full-Plane with a Crack at Any Angle to the Interface", Materialprüfung, Vol. 18, pp , Theocaris, P.S. and Gdoutos, E.E., "The Influence of Boundary Conditions on Stress Singularities in Biwedges", Proceedings of the XVII th Polish Solid Mechanics Conference, Wisla-Jawornik, Poland, pp ,

20 15. Theocaris, P.S. and Gdoutos, E.E., "Stress Singularities at Vertices of Composite Plates with Smooth or Rough Interfaces", Archives of Mechanics (Poland), Vol. 28, pp , Theocaris, P.S. and Gdoutos, E.E., "Experimental Solution of Flexed Plates by the Method of Caustics", Journal of Applied Mechanics, Vol. 44, Trans. ASME, Vol. 99, pp , Theocaris, P.S. and Gdoutos, E.E., "Distance Measuring Based on Caustics", Applied Optics, Vol. 16, pp , Theocaris, P.S. and Gdoutos, E.E., "The Influence of Boundary Conditions on the Stress Singularities in Biwedges", Theoretical and Applied Mechanics, Bulgarian Sciences, Vol. 8, pp , Theocaris, P.S. and Gdoutos E.E.," Limitations of the Westergaard Equation for Experimental Evaluations of Stress Intensity Factors", Discussion, Journal of Strain Analysis, Vol. 12, pp , Theocaris, P.S. and Gdoutos, E.E., "Stress Singularities in Cracked Composite Full- Planes", International Journal of Fracture, Vol. 13, pp , Gdoutos, E.E. and Theocaris, P.S.,"A Photoelastic Determination of Mixed Mode Stress Intensity Factors", Experimental Mechanics, Vol. 18, pp , Theocaris, P.S. and Gdoutos, E.E.,"A Unified Interpretation of Interferometric and Holographic Fringe Patterns", Journal of Strain Analysis, Vol. 13, pp , Theocaris, P.S., Gdoutos, E.E. and Thireos C.G., "Stress Singularities in a Biwedge under Various Boundary Conditions", Acta Mechanica, Vol. 29, pp , Theocaris, P.S. and Gdoutos, E.E., "On a Novel Matrix Method for Three-Dimensional Photoelasticity", Proceeding of the Sixth International Conference on Experimental Stress Analysis, Munchen, pp , Gdoutos, E.E., "A Photoelastic Determination of the Elastic-Plastic Boundary", Journal of Physics D: Applied Physics, Vol. 12, pp , Gdoutos, E.E., "Finite Width Effects on the Crack Extension Angle", International Journal of Fracture, Vol. 15, pp. R111-R114, Gdoutos, E.E., "The Influence of Specimen's Geometry on the Crack Extension Angle", Engineering Fracture Mechanics, Vol. 13, pp , Gdoutos, E.E., "Fracture of Plates with Circular Cracks", Materialprufung, Vol. 22, pp , Gdoutos, E.E., "On the Photoelastic Determination of K I Stress Intensity Factors in Duplex Specimens", International Journal of Fracture, Vol. 16, pp. R83-R84, Gdoutos, E.E., "A Photoelastic Prediction of the Crack Propagation Angle", Journal of Physics E: Scientific Instruments, Vol. 13, pp , Gdoutos, E.E., "Interaction between Two Equal Skew Parallel Cracks", Journal of Strain Analysis, Vol. 15, pp , Gdoutos, E.E., "Fracture Initiation from Singular Points of Rigid Inclusions", Journal of Applied Mechanics, Vol. 47, Trans. ASME, Vol. 102, pp ,

21 33. Raftopoulos, D.D., Gdoutos, E.E. and Baril, J.D., "A Literature Review of the Biomechanics of the Human Femur", Technical Publication, Department of Mechanical Engineering, University of Toledo, Ohio, pp. i-iii , Gdoutos, E.E., "Biaxial Load Effects on Crack Propagation and Fracture Toughness", Mechanique Appliquee, Vol. 26, pp , Gdoutos, E.E., "Failure of a Composite with a Rigid Fiber Inclusion", Acta Mechanica, Vol. 39, pp , "Gdoutos, E.E., "Fracture Phenomena in a Cracked Plate Subjected to a Concentrated Load", Engineering Fracture Mechanics, Vol. 14, pp , Gdoutos, E.E., "Failure of a Bimaterial Plate with a Crack at an Arbitrary Angle to the Interface", Fibre Science and Technology, Vol. 15, pp , Gdoutos, E.E., "Determination of Stress Intensity Factors During Crack Arrest in Duplex Specimens", International Journal of Solids and Structures, Vol. 17, pp , Gdoutos, E.E., "Fracture of Cracked Plates under Localised Moments", International Journal of Mechanical Sciences, Vol. 23, pp , Gdoutos, E.E., "Interaction Effects Between a Crack and a Circular Inclusion", Fibre Science and Technology, Vol. 15, pp , Gdoutos, E.E., "Crack-Tip Plastic Zones in Glassy Polymers under Small Scale Yielding", Journal of Applied Polymer Science, Vol. 26, pp , Gdoutos, E.E., "Fracture of Composites with Rigid Inclusions Having Cuspidal Points", Proceedings of International Conference on Analytical and Experimental Fracture Mechanics, Rome, Italy, June 23-25, 1980, edited by G.C. Sih and M. Mirabile, Sijthoff & Noordhoff, pp , Gdoutos, E.E., "Fracture Phenomena in Composites with Rigid Inclusions", Proceedings of the US-Greece Seminar on Mixed Mode Crack Propagation, Athens, Greece, August 18-22, 1980, Editors G.C. Sih and P.S. Theocaris, Sijhoff & Noordhoff, pp , Gdoutos, E.E., "Brittle Fracture of a Plate with Two Cracks Emanating from a Circular Hole under Inclined Tension", Materialprüfung, Vol. 23, pp , Gdoutos, E.E., "Isochromatic Patterns in a Plate with a Rigid Fiber Inclusion", Fibre Science and Technology, Vol. 15, pp , Gdoutos, E.E., "Yield Loci Around Fiber Inclusions", Journal of the Franklin Institute, Vol. 312, pp , Gdoutos, E.E., "Failure of a Plate with a Circular Hole Resulting from an Array of Surface Cracks", Engineering Fracture Mechanics, Vol. 15, pp , Gdoutos, E.E., "Spread of Plasticity from Cuspidal Points of Rigid Inclusions", Acta Mechanica, Vol. 44, pp , Gdoutos, E.E., "Isochromatic Fringe Patterns in Duplex Specimens", Fibre Science and Technology, Vol. 16, pp , Gdoutos, E.E. and Papakaliatakis, G., "Photoelastic Study of a Bimaterial Plate with a Crack Along the Interface", Engineering Fracture Mechanics, Vol. 16, pp ,

22 51. Gdoutos, E.E., Raftopoulos, D.D. and Baril, J.D., "A Critical Review of the Biomechanical Stress Analysis of the Human Femur", Biomaterials, Vol. 3, pp. 2-8, Gdoutos, E.E., "Fracture of Aluminum-Epoxy Layered Composites Containing Cracks", Journal of Strain Analysis, Vol. 17, pp , Gdoutos, E.E., "Photoelastic Analysis of the Stress Field Around Cuspidal Points of Rigid Inclusions", Journal of Applied Mechanics, Trans. ASME, Vol. 49, pp , Gdoutos, E.E., "Plastic Zones at the Tips of Inclined Cracks in Glassy Polymers under Small Scale Yielding", Joural of Applied Polymer Science, Vol. 27, pp , Sih, G.C. and Gdoutos, E.E., "A Modified Strain-Energy Density Criterion Applied to Crack Propagation", Discussion of the above paper, Journal of Applied Mechanics, Trans. ASME, Vol. 49, pp , Gdoutos, E.E., and Kattis, M., "Stress Function Interface and Boundary Conditions in Anisotropic Materials", Journal of Applied Mechanics, Trans. ASME, Vol.49, pp , Gdoutos, E.E., "Unstable Growth of Branched Cracks", Proceedings of the Second International Conference on "Defects, Fracture and Fatigue", Quebec, Canada, May 30- June 5, 1982, edited by G.C. Sih and J.W. Provan, Martinus Nijhoff Publishers, pp , Gdoutos, E.E., "Recent Developments of Experimental Fracture Mechanics in Greece", Engineering Fracture Mechanics, Vol. 18, pp , Gdoutos, E.E., "Fracture of a Bimaterial Plate with a Crack Along the Interface", Proceedings of the Second International Conference on Composite Structures, Paisley College of Technology, Scotland, September, 1983, edited by I. Marshall, Applied Science Publishers, pp , Sih, G.C., Moyer, T. and Gdoutos, E.E., "The Mises Elastic-Plastic Boundary as the Core Region in Fracture Criteria", Discussion of the above paper, Engineering Fracture Mechanics, Vol. 18, pp , Gdoutos, E.E. and Sih, G.C., "Failure Prediction of Structural Components Damaged by Yielding and/or Fracture", Lehigh University Technical Report IFSM , pp. i-iii and 1-64, Gdoutos, E.E., "Stable Crack Growth", Proceedings of "Colloquium on Mechanics", Athens National Technical University, Athens, Greece, September 30-October 1, 1983, pp , Gdoutos, E.E. and Zacharopoulos, D., "Plastic Zones in Cracked Anisotropic Plates under Small Scale Yielding", Fibre Science and Technology, Vol. 20, pp , Gdoutos, E.E., "Continuum Aspects of Crack Initiation", Proceedings of the International Conference on Application of Fracture Mechanics to Materials and Structures, Freiburg, Germany, June 1983, edited by G.C. Sih, E. Sommer and W. Dahl, Martinus Nijhoff Publishers, pp , Gdoutos, E.E., "Stable Growth of a Central Crack", Theoretical and Applied Fracture Mechanics, Vol. 1, pp ,