FT-63 SINGLE TURN CERMET TRIMMERS. F T E T V 5 k Ω ( ) FEATURES PART NUMBER DESIGNATION

Save this PDF as:
 WORD  PNG  TXT  JPG

Μέγεθος: px
Εμφάνιση ξεκινά από τη σελίδα:

Download "FT-63 SINGLE TURN CERMET TRIMMERS. F T E T V 5 k Ω ( ) FEATURES PART NUMBER DESIGNATION"

Transcript

1 SINGLE TURN FT-6 RoHS compliant INTERNAL STRUCTURE FEATURES Part name Housing Rotor Wiper O ring Resistive element Terminal pin Adhesive Base element Electrode Material PBT Polybutyleneterephthalate Nickel silver Silicone rubber RuO cermet Copper, Tin-plated Epoxy Ceramic Ag-Pd cermet Flammability UL4V-0 UL4HB UL4V-0 PART NUMBER DESIGNATION F T - 6 E T V 5 k Ω ( 5 0 ) Series name Resistance code Terminal pin ESn (Lead-free) Form of packaging TTaping (Ammo pack type) BlankBulk in plastic bag Resistance value Product shape P Top adjustment S Side adjustment V Top adjustment X Side adjustment H Side adjustment N Side adjustment Please refer to the LIST OF PART NUMBERS when placing orders.

2 FT-6 LIST OF PART NUMBERS position Top adjustment Side adjustment Form of packaging Taping (Ammo pack type) FT-6ETP FT-6ETV FT-6ETS FT-6ETH Not manufactured Plastic bag FT-6EP FT-6EV FT-6ES FT-6EX FT-6EH FT-6EN Nominal resistance values Fig. A 0 Ω A 0 Ω 50 Ω 00 Ω 00 Ω 00 Ω 500 Ω kω kω kω 5 kω 0 kω 0 kω 0 kω 50 kω 00 kω 00 kω 00 kω 500 kω MΩ MΩ Fig. The above part numbers are all available with the respective com bi na tion of <Nominal resistance values> (Fig. ). Verify the above part numbers when placing orders. Taping specification is not sold separately and must be purchased in tap ing unit. A The products indicated by A mark are manufactured upon receipt of order basis. ELECTRICAL CHARACTERISTICS Nominal resistance range Resistance tolerance Power ratings Resistance law Maximum input voltage Maximum wiper current Effective electrical angle End resistance C.R.V. Operating temp. range Temp. coefficient Insulation resistance Dielectric strength Net weight 0 Ω ~ MΩ ± 0 % 0.5 W (0 C) 0 W (5 C) Linear law DC00 V or power rating, whichever is smaller Power ratings 0 ( turn) Ω % or Ω, whichever is greater Ω % or Ω, whichever is greater 55 ~ 5 C 0 Ω ~ 0 Ω : ± / C maximum 50 Ω ~ MΩ : ± / C maximum 000 MΩ minimum (DC500 V) AC00 V, 60 s Approx. 0.5 g (FT-6EP, EV) Approx g (FT-6ES, EH, EX, EN) MECHANICAL CHARACTERISTICS Mechanical angle Operating torque Stop strength Rotational life Terminal strength Thrust to rotor Solderability 60 ( turn) 0 mn m {04 gf cm} maximum 50 mn m {50 gf cm} minimum 00 cycles [R/R ± ( Ω + %)] 0 N {.0 kgf} minimum Tensile strength 0 N {.0 kgf} minimum 45 ± C, ~ s { }Reference only

3 FT-6 ENVIRONMENTAL CHARACTERISTICS Test item Thermal shock Humidity Shock Vibration Load life Low temp. operation High temp. exposure Immersion seal Soldering heat Test conditions 65 ~ 5 C (0.5 h), 5 cycles 0 ~ 65 C ( 80 ~ 8 %), 0 cycles, 40 h 8 m/s, 6 ms 6 directions for times each (Amplitude).5 mm or (Acceleration) 6 m/s, 0 ~ 000 Hz, directions, times each 0 C, 0.5 W 000 h 55 C, h 5 C, 50 h 85 C, 60 s Flow 60 ± C, 5 ~ 6 s, two times maximum Manual soldering 80 ± 0 C, ~ 4 s Specifications [R/R %] [S.S. %] [R/R %] [R/R %] [S.S. %] [R/R %] [S.S. %] [R/R %] [S.S. %] [R/R %] [S.S. %] No leaks (No continuous bubbles) [R/R %] R/RChange in total resistance S.S. Setting stability MAXIMUM INPUT RATINGS Nominal resistance values (Ω) Resistance code Maximum input voltage (V) Maximum wiper current (ma) A A k k k k k k k k k k k k M M A The products indicated by A mark are manufactured upon receipt of order basis.

4 FT-6 OUTLINE DIMENSIONS FT-6EP Top adjustment 60 Nom. 0.W L.6D φ 0.45 Unless otherwise specified, tolerance: ± 0. (Unit: mm) CW rotation 5.8 ± FT-6ES Side adjustment 0 60 Nom. 0.W L.6D ± φ 0.45 FT-6EX Side adjustment 0.W L.6D 0 0. Lead-free Identification mark 60 Nom. 8. 0±.5 φ 0.45

5 FT-6 OUTLINE DIMENSIONS FT-6EV Top adjustment 60 Nom. 0.W L.6D φ 0.45 Unless otherwise specified, tolerance: ± 0. (Unit: mm) CW rotation FT-6EH Side adjustment ± 6 ± Lead-free Identification mark 0 60 Nom. 0.W L.6D 0..5 ± FT-6EN Side adjustment Lead-free Identification mark 0.W L.6D Nom..5.5 ± 8. φ ± 8. φ 0.45 Terminals & position in N type is different from X type.

6 FT-6 OUTLINE DIMENSIONS Unless otherwise specified, tolerance: ± 0. (Unit: mm) CW rotation FT-6ETV Top adjustment FT-6ETP Top adjustment 60 Nom. 0.W L.6D 60 Nom. 0.W L.6D.± Δ max. Δ max..± Δ max. Δ max. 4.8± ±0.5 min. 8± ± ± +0. ±0.5 6± min ± ±0.5 φ 4±0. 6.5±0.5 φ 4±0..± ±0.0.± ±0.0 FT-6ETH Side adjustment FT-6ETS Side adjustment 60 Nom..± 0 0.W L.6D Δ max Δ max..± 60 Nom. 0 0.W L.6D Δ max Δ max. ±0.5.± ±0.5 min ±0.5.5.± ±0.5 6± min ± ±0.5.± ±0.0 φ 4±0. 6.5±0.5 φ 4±0. 0..± ±0.0

7 FT-6 PACKAGING SPECIFICATIONS <Taping packaging specifications> <Bulk pack specifications> # terminal Direction of feed Direction of feed Ammo pack type # terminal Ammo Pack

ST-4 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) S T - 4 E T A Ω ( ) S T E T A Ω ( ) FEATURES PART NUMBER DESIGNATION

ST-4 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) S T - 4 E T A Ω ( ) S T E T A Ω ( ) FEATURES PART NUMBER DESIGNATION SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN ST-4 RoHS compliant INTERNAL STRUCTURE 7 6 FEATURES RoHS compliant Wide variety (7 types to choose from Automatic mounting is possible (Taping Flow/reflow soldering

Διαβάστε περισσότερα

CL-SB SLIDE SWITCHES CL - SB B T FEATURES PART NUMBER DESIGNATION. RoHS compliant

CL-SB SLIDE SWITCHES CL - SB B T FEATURES PART NUMBER DESIGNATION. RoHS compliant CL-SB RoHS ompliant INTERNAL STRUCTURE 1 6 4 FEATURES Part name Cover Slider Housing Moving ontat Fixed ontat pin 5 Material Flammability Stainless steel (SUS 4) UL94V- Polyamido PPS UL94V- Polyphenylenesulphide

Διαβάστε περισσότερα

CL-SB SLIDE SWITCHES CL - SB B T FEATURES PART NUMBER DESIGNATION. RoHS compliant

CL-SB SLIDE SWITCHES CL - SB B T FEATURES PART NUMBER DESIGNATION. RoHS compliant CL-SB RoHS ompliant INTERNAL STRUCTURE 1 6 4 5 Part name Material Flammability FEATURES Cover Stainless steel (SUS 4) Slider Housing Moving ontat Fixed ontat pin Polyamido Polyphenylenesulphide Copper

Διαβάστε περισσότερα

SC-1000/2000 ROTARY CODED SWITCHES FEATURES PART NUMBER DESIGNATION S C - 1 0 1 0 T B. RoHS compliant

SC-1000/2000 ROTARY CODED SWITCHES FEATURES PART NUMBER DESIGNATION S C - 1 0 1 0 T B. RoHS compliant SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 FEATURES BC RoHS compliant Fine click with metallic spring Low profile of 3.9 mm makes perfect for high density board mounting applications

Διαβάστε περισσότερα

Thin Film Chip Resistors

Thin Film Chip Resistors FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating

Διαβάστε περισσότερα

Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of

Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts

Διαβάστε περισσότερα

Metal Oxide Leaded Film Resistor

Metal Oxide Leaded Film Resistor Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for

Διαβάστε περισσότερα

Metal Oxide Leaded Film Resistor

Metal Oxide Leaded Film Resistor Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for

Διαβάστε περισσότερα

Carbon Film Leaded Resistor

Carbon Film Leaded Resistor CFR Series Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Automotive

Διαβάστε περισσότερα

S-7000 ROTARY CODED SWITCHES (SMD) FEATURES PART NUMBER DESIGNATION S - 7 0 1 0 E T A. RoHS compliant

S-7000 ROTARY CODED SWITCHES (SMD) FEATURES PART NUMBER DESIGNATION S - 7 0 1 0 E T A. RoHS compliant S- RoHS compliant INTERNL STRUCTURE ETURES RoHS compliant Low profile of. mm Wide variety (top or side setting,, or positions, J-hook, gull wing or throuhg hole pins) to choose from Compatible with flow

Διαβάστε περισσότερα

Metal Oxide Leaded Film Resistor

Metal Oxide Leaded Film Resistor SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled

Διαβάστε περισσότερα

Carbon Film Leaded Resistor

Carbon Film Leaded Resistor Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication

Διαβάστε περισσότερα

SMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of

SMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to

Διαβάστε περισσότερα

Metal Film Leaded Precision Resistor

Metal Film Leaded Precision Resistor Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications

Διαβάστε περισσότερα

Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206

Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features

Διαβάστε περισσότερα

Metal Film Leaded Precision Resistor

Metal Film Leaded Precision Resistor Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication

Διαβάστε περισσότερα

YJM-L Series Chip Varistor

YJM-L Series Chip Varistor Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer

Διαβάστε περισσότερα

Thick Film Chip Resistors

Thick Film Chip Resistors FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MW) THICK FILM ON ALUMINA SUSTRATE,

Διαβάστε περισσότερα

Anti-Corrosive Thin Film Precision Chip Resistor (PR Series)

Anti-Corrosive Thin Film Precision Chip Resistor (PR Series) (PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down

Διαβάστε περισσότερα

Thin Film Precision Chip Resistor (AR Series)

Thin Film Precision Chip Resistor (AR Series) Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to ±5PPM/C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201

Διαβάστε περισσότερα

Metal Film Flame-Proof Resistors

Metal Film Flame-Proof Resistors Features -Low Noise -Low TCR from ±15~100PPM/ -High Precision from ±0.1%~1% -Complete Flameproof Construction UL-1412. -Coating meets UL94V-0 Applications -Telecommunication -Medical Equipment -Consumer

Διαβάστε περισσότερα

CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK

CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high

Διαβάστε περισσότερα

Multilayer Chip Inductor

Multilayer Chip Inductor Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other

Διαβάστε περισσότερα

Thin Film Precision Chip Resistor (AR Series)

Thin Film Precision Chip Resistor (AR Series) Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to PPM/ C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201

Διαβάστε περισσότερα

Thin Film Precision Chip Resistor (AR Series)

Thin Film Precision Chip Resistor (AR Series) Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to PPM/ C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201

Διαβάστε περισσότερα

Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of

Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features

Διαβάστε περισσότερα

CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS

CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART

Διαβάστε περισσότερα

1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat (Epoxy)

1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat (Epoxy) ARN series Thin Film High Precision Chip Resistor Features» Advanced thin film technology» Very tight tolerance down to ±0.01%» Extremely low TCR down to ±5ppm/» Wide resistance range 1ohm-3Mega ohm» Miniature

Διαβάστε περισσότερα

NTC Thermistor:TTC3 Series

NTC Thermistor:TTC3 Series Features. RoHS compliant 2. Halogen-Free(HF) series are available 3. Body size: Ф3mm 4. Radial lead resin coated 5. Operating temperature range: -40 ~+25 6. Wide resistance range 7. Cost effective 8. Agency

Διαβάστε περισσότερα

Thin Film Precision Chip Resistor (AR Series)

Thin Film Precision Chip Resistor (AR Series) Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to PPM/ C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201

Διαβάστε περισσότερα

CWS FEATURES APPLICATIONS PART NUMBER DESIGNATION. RoHS compliant. Please refer to the LIST OF PART NUMBERS when placing orders.

CWS FEATURES APPLICATIONS PART NUMBER DESIGNATION. RoHS compliant. Please refer to the LIST OF PART NUMBERS when placing orders. WS RoHS compliant FEATURES RoHS compliant Excellet contact stability by twin Gold-plated contact ost effective Part name over Slider Housing Material Polyphenylenesulphide Polyamide Polyphenylenesulphide

Διαβάστε περισσότερα

Terminal Contact UL Insulation Designation (provided with) style form system approval Flux tight

Terminal Contact UL Insulation Designation (provided with) style form system approval Flux tight eatures A miniature PCB Power Relay. form A contact configuration with quick terminal type. 5KV dielectric strength, K surge voltage between coils to contact. Ideal for high rating Home Appliances of heating

Διαβάστε περισσότερα

MAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet

MAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor

Διαβάστε περισσότερα

RC series Thick Film Chip Resistor

RC series Thick Film Chip Resistor RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»

Διαβάστε περισσότερα

Thin Film Precision Chip Resistor-AR Series

Thin Film Precision Chip Resistor-AR Series hin Film Precision Chip Resistor-AR Series Construction L D1 3 4 5 6 D2 9 8 7 1 2 1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat

Διαβάστε περισσότερα

Surface Mount Multilayer Chip Capacitors for Commodity Solutions

Surface Mount Multilayer Chip Capacitors for Commodity Solutions Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF

Διαβάστε περισσότερα

NTC Thermistor:TSM type

NTC Thermistor:TSM type Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended

Διαβάστε περισσότερα

Thick Film Array Chip Resistor

Thick Film Array Chip Resistor CN Series Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Reduction of assembly costs and

Διαβάστε περισσότερα

NTC Thermistor:SCK Series

NTC Thermistor:SCK Series Features. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φmm:-40~+70

Διαβάστε περισσότερα

LR(-A) Series Metal Alloy Low-Resistance Resistor

LR(-A) Series Metal Alloy Low-Resistance Resistor LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.

Διαβάστε περισσότερα

Current Sense Metal Strip Resistors (CSMS Series)

Current Sense Metal Strip Resistors (CSMS Series) Features: Range: 1mΩ to 100mΩ Low TCR as low as 75PPM High power rating Custom Values available RoHS Compliant and Halogen Free Operating Temperature: -55 C to +170 C Part Number Structure CSMS 0805 -

Διαβάστε περισσότερα

4. Construction. 5. Dimensions Unit mm

4. Construction. 5. Dimensions Unit mm 1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin

Διαβάστε περισσότερα

Thick Film Chip Resistors

Thick Film Chip Resistors FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MΩ) THICK FILM ON ALUMINA SUSTRATE,

Διαβάστε περισσότερα

Data sheet Thin Film Chip Inductor AL Series

Data sheet Thin Film Chip Inductor AL Series Data sheet Thin Film Chip Inductor AL Series Scope - 0201 and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and

Διαβάστε περισσότερα

Thin Film Chip Inductor

Thin Film Chip Inductor Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable

Διαβάστε περισσότερα

Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of

Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification

Διαβάστε περισσότερα

THICK FILM LEAD FREE CHIP RESISTORS

THICK FILM LEAD FREE CHIP RESISTORS Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration

Διαβάστε περισσότερα

RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.

RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. PRODUCT DETAIL Electrical Characteristics μh L (Min) Q MHz (Min) SRF Ω DCR IDC ma TEST FREQ: MHz TEST LEVEL: 100 mv Test Instruments HP4291

Διαβάστε περισσότερα

Current Sensing Chip Resistor

Current Sensing Chip Resistor Features -3 atts power rating in 1 att size, 1225 package -Low CR of ±100 PPM/ C -Resistance values from 1m to 1 ohm -High purity alumina substrate for high power dissipation -Long side terminations with

Διαβάστε περισσότερα

NTC Thermistor:SCK Series

NTC Thermistor:SCK Series Features. RoHS & HF compliant 2. Body size: Ф5mm ~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70

Διαβάστε περισσότερα

Features. Terminal Contact Enclosure style style form Open type Dust cover Ears on cover Antirotation-tab Ears on top

Features. Terminal Contact Enclosure style style form Open type Dust cover Ears on cover Antirotation-tab Ears on top SONG CHUN Features 20/2 general purpose Power Relays. SPDT, DPDT, TPDT contact configurations. DC & C coils are both available. Optional for flange covers, tapped core w/anti-rotation tab, indicator lamp,

Διαβάστε περισσότερα

LR Series Metal Alloy Low-Resistance Resistor

LR Series Metal Alloy Low-Resistance Resistor LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The

Διαβάστε περισσότερα

Operating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)

Operating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code) FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM

Διαβάστε περισσότερα

LR Series Metal Alloy Low-Resistance Resistor

LR Series Metal Alloy Low-Resistance Resistor Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product

Διαβάστε περισσότερα

THICK FILM CHIP RESISTOR" CAL-CHIP ELECTRONICS INC."

THICK FILM CHIP RESISTOR CAL-CHIP ELECTRONICS INC. THICK FILM CHIP RESISTOR CAL-CHIP ELECTRONICS INC. CAL-CHIP SERIES: RM SERIES 1 2 3 INTRODUCTION SCOPE Applies to all sizes of rectangular-type fixed chip resistors with Ruthenium base as material. FEATURES

Διαβάστε περισσότερα

NTIC Series. Limiting Inrush Current. NTC Power Thermistor for FEATURES PART NUMBER SYSTEM UL E Ф5~Ф15mm NTIC M S.

NTIC Series. Limiting Inrush Current. NTC Power Thermistor for FEATURES PART NUMBER SYSTEM UL E Ф5~Ф15mm NTIC M S. FEATURES UL E223037 Body size: Ф5mm ~ Ф30mm Radial lead resin coated High power rating Wide resistance range Cost effective Operating temperature range: Ф5mm: -40ºC~150ºC Ф8~Ф10mm: -40ºC~170ºC Ф13~Ф30mm:

Διαβάστε περισσότερα

DATA SHEET Surface mount NTC thermistors. BCcomponents

DATA SHEET Surface mount NTC thermistors. BCcomponents DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped

Διαβάστε περισσότερα

Ceramic PTC Thermistor Overload Protection

Ceramic PTC Thermistor Overload Protection FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over

Διαβάστε περισσότερα

SMD - Resistors. Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612. official distributor of

SMD - Resistors. Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612. official distributor of Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612 official distributor of 1. Scope Thick Film Chip Resistor-SMDC Series -This specification applies

Διαβάστε περισσότερα

HIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)

HIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4) FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)

Διαβάστε περισσότερα

Thin Film Chip Resistors

Thin Film Chip Resistors FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) Type EI Size Power Rating at 70

Διαβάστε περισσότερα

Thin Film Chip Resistors

Thin Film Chip Resistors FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) RoHS Compliant includes all homogeneous

Διαβάστε περισσότερα

Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.

Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater. Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges

Διαβάστε περισσότερα

Trimmable Thick Film Chip Resistor

Trimmable Thick Film Chip Resistor rimmable hick ilm Chip Resistor R Series rimmable hick ilm Chip Resistor Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. eatures

Διαβάστε περισσότερα

Thin Film Chip Inductor

Thin Film Chip Inductor Scope -Calchip s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Calchip s design provides high, excellent Q, and superior temperature stability. This highly

Διαβάστε περισσότερα

High Frequency Chip Inductor / CF TYPE

High Frequency Chip Inductor / CF TYPE High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no

Διαβάστε περισσότερα

Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512. official distributor of

Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512. official distributor of Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512 official distributor of Thick Film Chip Resistor-SMDC Series 1. Scope -This specification applies to all

Διαβάστε περισσότερα

Power Inductor LVS Series

Power Inductor LVS Series RoHS Compliant Halogen Free REACH Compliant Part Numbering LVS 6645 L - 1R M - AU Series Name Dimensions Code Inductance Internal Code (mm) (uh) Tolerance 4412 4.x4.x1.2 L Low DCR R47.47 M ±% 4418 4.x4.x1.8

Διαβάστε περισσότερα

1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC

1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical

Διαβάστε περισσότερα

Polymer PTC Resettable Fuse: KRG Series

Polymer PTC Resettable Fuse: KRG Series Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is

Διαβάστε περισσότερα

Polymer PTC Resettable Fuse:KMC Series

Polymer PTC Resettable Fuse:KMC Series Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.

Διαβάστε περισσότερα

Melf Carbon Film Resistor MMC Series

Melf Carbon Film Resistor MMC Series Melf Resistor Melf Carbon Film Resistor MMC Series Coating color: Beige Features - Tolerance up to ±2%. - Wide resistance range:1ω to 10MΩ. Type Dimension TYPE L D C S 0102 2.00±0.10 1.30±0.10 0.55±0.10

Διαβάστε περισσότερα

Anti-Sulfurated Thick Film Chip Resistor

Anti-Sulfurated Thick Film Chip Resistor S Series Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Special construction to prevent sulfuration in a sulfur containing

Διαβάστε περισσότερα

Thick Film Chip Resistors

Thick Film Chip Resistors FEATURES EIA STANDARD SIZING 01005(1/32), 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES

Διαβάστε περισσότερα

NTC Thermistor:SCK Series

NTC Thermistor:SCK Series Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:

Διαβάστε περισσότερα

NTC Thermistor:SCK Series

NTC Thermistor:SCK Series Features. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70

Διαβάστε περισσότερα

Metal Oxide Varistors (MOV) Data Sheet

Metal Oxide Varistors (MOV) Data Sheet Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping

Διαβάστε περισσότερα

CPTC Thermistor:PS Series

CPTC Thermistor:PS Series Features 1. RoHS compliant Two versions available PSA versions are uncased, metallized disk for clamp-contacting PSB versions are cased 2. Voltage ratings: from 160V AC to 500V AC 3. Stable over a long

Διαβάστε περισσότερα

Anti-Sulfurated Thick Film Chip Resistor

Anti-Sulfurated Thick Film Chip Resistor S Series Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Special construction to prevent sulfuration in a sulfur containing

Διαβάστε περισσότερα

High Voltage Thick Film Chip Resistor

High Voltage Thick Film Chip Resistor Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Highly reliable multilayer electrode construction -Higher component and

Διαβάστε περισσότερα

NTC Thermistor:SCK Series

NTC Thermistor:SCK Series Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:

Διαβάστε περισσότερα

No Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type

No Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification

Διαβάστε περισσότερα

Automotive Grade Thin Film Precision Chip Resistor

Automotive Grade Thin Film Precision Chip Resistor Features Construction D1 L -AEC-Q200 Compliance -Advanced thin film technology -RoHS compliant - Special materials, design, and processing for high sulfur applications - Test proven immunity to humidity,

Διαβάστε περισσότερα

Aluminum Electrolytic Capacitors (Large Can Type)

Aluminum Electrolytic Capacitors (Large Can Type) Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction

Διαβάστε περισσότερα

NTC Thermistor:SCK Series

NTC Thermistor:SCK Series NTC Thermistor:SCK Series Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating

Διαβάστε περισσότερα

Multilayer Ceramic Chip Capacitors

Multilayer Ceramic Chip Capacitors FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM

Διαβάστε περισσότερα

Interference Suppression Capacitor

Interference Suppression Capacitor MOLDED BOX CONSTRUCTION, SUPPRESSION CAPACITOR, RADIAL LEAD FEATURES UL, CSA, VDE, CQC, CE, ENEC APPROVALS X2 SAFETY CAP CLASSIFICATION FOR USE IN ACROSS-THE-LINE APPLICATIONS METALLIZED POLYPROPYLENE

Διαβάστε περισσότερα

Unshielded Power Inductor / PI Series

Unshielded Power Inductor / PI Series .Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:

Διαβάστε περισσότερα

Data Sheet. Customer: Current Sensing Thick Film Chip Resistor - RS Series Size: 0402/0603/0805/1206/1210/2010/2512. Accepted by (QC) Approved by

Data Sheet. Customer: Current Sensing Thick Film Chip Resistor - RS Series Size: 0402/0603/0805/1206/1210/2010/2512. Accepted by (QC) Approved by Data Sheet Customer: Product: Current Sensing Thick Film Chip Resistor - RS Series Size: 0402/0603/0805/1206/1210/2010/2512 Issued Date: 01-Jun-10 Edition: REV.A5 Produced by Checked Approved by Prepared

Διαβάστε περισσότερα

Aluminum Electrolytic Capacitors

Aluminum Electrolytic Capacitors Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47

Διαβάστε περισσότερα

Surface Mount Aluminum Electrolytic Capacitors

Surface Mount Aluminum Electrolytic Capacitors FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING

Διαβάστε περισσότερα

Multilayer Ceramic Chip Capacitors

Multilayer Ceramic Chip Capacitors FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient

Διαβάστε περισσότερα

WLCW1005 SMD Wire Wound Ceramic Chip Inductors

WLCW1005 SMD Wire Wound Ceramic Chip Inductors WCW1005 SMD Wire Wound Ceramic Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WCW1005 Series_V5.0 Mar. 2016 Features 1. Standard chip size bobbin with

Διαβάστε περισσότερα

NTC Thermistor:SCK Series

NTC Thermistor:SCK Series Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:

Διαβάστε περισσότερα

Metal thin film chip resistor networks

Metal thin film chip resistor networks Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/

Διαβάστε περισσότερα

AL Series - Thin Film Chip Inductor

AL Series - Thin Film Chip Inductor Features A Photo Lithographic Single Layer Ceramic Chip High SRF, Excellent, Superior Temperature Stability Tight Tolerance of ± % or ±.nh Self Resonant Frequency Controlled within % Stable Inductance

Διαβάστε περισσότερα