FEATURES HOW TO ORDER SWH - G03 - C2 - A LS SOLENOID OPERATED DIRECTIONAL VALVE SWH-G03 SERIES 1/10
|
|
|
- Οινώνη Ζαχαρίου
- 7 χρόνια πριν
- Προβολές:
Transcript
1 SOLENOID OPERATED DIRECTIONAL VALVE FEATURES The indicating lights are the standard equipment. Coil screws are especially designed to prevent shocks. Electrical connections are with joint box type and hirschmann din type plug-in connector. Join box is of waterproof and dust-resistance. The space for electrical connections is large enough for connection layout. Electrical connection points are aligned with the axial direction to be compatible with modular system. For ease of installation and repair, the valve mounting screws are on the outside of the body. To sustain high pressure up to (4500 psi), allows for large flow rates up to 120 lpm (32 gpm). The ideal design of flow passages will minimize the pressure drop. The 4-way 4-land constructure design is applied, for reducing the flow force and system surging pressure. To sustain high back pressure up to 160 kgf/cm 2 (2350 psi) Manufactured with unified specifications allows for parts and accessories interchangeably. Viton seal kits are available for five-resistance fluids. HOW TO ORDER SWH - G03 - C2 - A LS NO CODE : STANDARD LS: LOW SURGE VOLTAGE( See page 8/10) WIRING: 10: WITH JOINTION BOX 20: HIRSCHMANN TYPE WITH INDICATING LIGHT COIL VOLTAGE: A240: AC240V, 60Hz ; AC220V, 50Hz A220: AC220V, 60Hz ; AC200V, 50Hz R220: AC220V, 50/60Hz A120: AC120V, 60Hz; AC110V, 50Hz A110: AC110V, 60Hz; AC100V, 50Hz R110: AC110V, 50/60Hz D24: DC24V D12: DC12V SPOOL TYPE (See Application Common Data) NOMINAL SIZE: 3/8 (D05) SUBPLATE MOUNTED HIGH PRESSURE HIGH FLOW SOLENOID DIRECTIONAL VALVE 1/10
2 SOLENOID OPERATED DIRECTIONAL VALV SPECIFICATIONS Maximum operating pressure Maximum flow capacity Maximum tank line back pressure Maximum frequencies of operation Recommended fitration Hydraulic fluids 120 LPM (32 GPM) 160 kgf/cm 2 (2350 PSI) 240 CPM 25 Micron Mineral oil, recommendation temperature 0-55 C Max. temperature range -25 C ~ 90 C Viscosity cst SOLENOID RATINGS ELECTRI C SOURCE A.C. D.C. CURRENT & POWER VOLTAGE (V) AT RATED VOLTAGE COIL TYPE SOURCE IN-RUSH HOLDING Hz RANGE WATTAGE RATED CURRENT (A) CURRENT (A) 50 AC100V A110 AC100V AC110V A AC110V AC120V AC200V A220 AC200V AC220V A AC220V AC240V R AC100V AC110V R AC200V AC220V D12 DC12V D24 DC24V TECHNICAL DATA: Solenoid can be used within - 10% to + 10% of the rated voltage of the coil. Withstand voltage 1500 v/sec. Insulation resistance over 100MΩ. ACCESSORIES: Mounting bolt kits are supplied with valve socket head cap screws M 6 x 35L 4 pieces (1/4" 20UNC x 1 3 / 8 " L) for tightening torque kgf-cm. ( lbs-in) O-ring AS pieces. 2/10
3 SOLENOID OPERATED DIRECTIONAL VALVE PRESSURE DROP AND PERFORMANCE CURVES TEST SYSTEM 1. Testing Valve 2. Pump 3. Pressure Sensor 4. Flow Sensor 5. Relief Valve 6. Throttle Valve TEST CIRCUIT TEST CONDITIONS Pressure: 70kgf/cm 2 (1000PSI) Flow Rate: 140 LPM (370GPM) Viscosity: 35 cst PERFORMANCE CURVES SPOOL Pressure Drop Curve Number TYPE P A B T P B A T P T C C C C C C C C C C B B B B2S B3S B20S 5 5 CONTRAST CHART BETWEEN FACTORS AND VISCOSITIES VISCOSITY CST SSU FACTOR(G ) The pressure drop ( P ) can be obtained from the formula P = P(G /0.85 ) for other specific gravity (G ) 3/10
4 SOLENOID OPERATED DIRECTIONAL VALV LIST OF SPOOL FUNCTION THE MAXIMUM FLOW RATE LPM(GPM) UNDER DIFFERENT PRESSURE KGF/CM 2 (PSI) SWH G03 AC TYPE SPOOL TYPE NORMAL POSITION C2 P >A,B >T P >B,A >T P >B 54(14.3) 38(10.0) C3 C4 C40 54(14.3) 42(11.1) 75(19.8) C5 88(23.2) 88(23.2) 88(23.2) 88(23.2) 88(23.2) 82(21.7) 82(21.7) 82(21.7) 82(21.7) 82(21.7) C6 C7 84(22.2) 84(22.2) 84(22.2) 84(22.2) 84(22.2) 75(19.8) 75(19.8) 75(19.8) 75(19.8) 75(19.8) 95(25.1) 95(25.1) 63(16.6) 63(16.6) C8 44(11.6) 30(7.9) 19(5.0) 76(20.1) 28(7.4) 21(5.5) 14(3.7) 53(14.0) C9 57(15.1) 57(15.1) B2 B3 90(23.8) 90(23.8) 90(23.8) 90(23.8) 90(23.8) 90(23.8) 72(19.0) 72(19.0) 72(19.0) 72(19.0) 72(19.0) 72(19.0) 89(23.5) 89(23.5) 89(23.5) 89(23.5) 89(23.5) 89(23.5) 81(21.4) 81(21.4) 81(21.4) 81(21.4) 81(21.4) 81(21.4) 63(16.6) 63(16.6) B20 81(21.4) 29(7.7) D2 60(15.9) 40(10.6) D3 70(18.5) 60(15.9) NOTTE: The figures in the square shows the parameter among voltage & flow under saturated temperatu -re and 90%applied voltage. 4/10
5 SOLENOID OPERATED DIRECTIONAL VALVE P >B 40(10.6) 28(7.4) 25(6.6) 20(5.3) 54(14.3) 40(10.6) 28(7.4) 25(6.6) 20(5.3) 27(7.1) 17(4.5) 13(3.4) 10(2.6) 38(10.0) 27(7.1) 17(4.5) 13(3.4) 10(2.6) 30(7.9) 23(6.1) 18(4.8) 14(3.7) 54(14.3) 30(7.9) 23(6.1) 18(4.8) 14(3.7) 27(7.1) 16(4.2) 11(2.9) 8(2.1) 42(11.1) 27(7.1) 16(4.2) 11(2.9) 8(2.1) 33(8.7) 28(7.4) 22(5.8) 18(4.8) 33(8.7) 28(7.4) 22(5.8) 18(4.8) 23(6.1) 21(5.5) 15(4.0) 12(3.2) 75(19.8) 23(6.1) 21(5.5) 15(4.0) 12(3.2) 95(25.1) 95(25.1) 95(25.1) 95(25.1) 95(25.1) 95(25.1) 95(25.1) 95(25.1) 63(16.6) 63(16.6) 63(16.6) 63(16.6) 63(16.6) 63(16.6) 63(16.6) 63(16.6) 63(16.6) 63(16.6) 37(9.8) 34(9.0) 28(7.4) 20(5.3) 61(16.1) 33(8.7) 27(7.1) 20(5.3) 16(4.2) 32(8.5) 28(7.4) 21(5.5) 15(4.0) 48(12.7) 27(7.1) 21(5.5) 15(4.0) 9(2.4) 57(15.1) 57(15.1) 57(15.1) 57(15.1) 63(16.6) 63(16.6) 63(16.6) 63(16.6) 19(5.0) 12(3.2) 9(2.4) 7(1.8) 53(14.0) 47(12.4) 45(11.9) 40(10.6) 34(9.0) 40(10.6) 37(9.8) 34(9.0) 29(7.7) 25(6.6) 78(20.6) 45(11.9) 43(11.4) 38(10.0) 32(8.5) 74(19.6) 38(10.0) 36(9.5) 31(8.2) 27(7.1) 95(25.1) 82(21.7) 75(19.8) 65(17.2) 89(23.5) 84(22.2) 77(20.3) 70(18.5) 62(16.4) 80(21.1) 32(8.5) 25(6.6) 20(5.3) 14(3.7) 42(11.1) 28(7.4) 22(5.8) 17(4.5) 12(3.2) 40(10.6) 40(10.6) 30(7.9) 28(7.4) 60(15.9) 40(10.6) 40(10.6) 40(10.6) 30(7.9) 28(7.4) 60(15.9) 60(15.9) 42(11.1) 36(9.5) 70(18.5) 60(15.9) 60(15.9) 60(15.9) 42(11.1) 36(9.5) 5/10
6 SOLENOID OPERATED DIRECTIONAL VALV LIST OF SPOOL FUNCTION THE MAXIMUM FLOW RATE LPM(GPM) UNDER DIFFERENT PRESSURE KGF/CM 2 (PSI) SWH G03 DC TYPE SPOOL TYPE NORMAL POSITION C2 P >A,B >T P >B,A >T P >A C3 C4 C40 97(25.6) 78(20.6) 60(15.9) 75(19.8) 54(14.3) 41(10.8) 115(30.4) C5 C6 C7 65(17.2) 65(17.2) C8 97(25.6) 78(20.6) 66(17.4) 85(22.5) 54(14.3) 41(10.8) C9 65(17.2) 65(17.2) B (18.2) 69(18.2) B3 89(23.5) 89(23.5) 89(23.5) 89(23.5) 89(23.5) 89(23.5) B20 85(22.5) 35(9.2) D2 60(15.9) 40(10.6) D3 70(18.5) 60(15.9) 6/10
7 SOLENOID OPERATED DIRECTIONAL VALVE P->B 73(19.3) 63(16.6) 54(14.3) 37(9.8) 73(19.3) 63(16.6) 54(14.3) 37(9.8) 55(14.5) 48(12.7) 38(10.0) 29(7.7) 55(14.5) 48(12.7) 38(10.0) 29(7.7) 90(23.8) 73(19.3) 60(15.9) 47(12.4) 90(23.8) 73(19.3) 60(15.9) 47(12.4) 78(20.6) 64(16.9) 51(13.5) 39(10.3) 78(20.6) 64(16.9) 51(13.5) 39(10.3) 75(19.8) 54(14.3) 42(11.1) 37(9.8) 75(19.8) 54(14.3) 42(11.1) 37(9.8) 50(13.2) 39(10.3) 30(7.9) 21(5.5) 115(30.4) 50(13.2) 39(10.3) 30(7.9) 21(5.5) 65(17.2) 65(17.2) 65(17.2) 65(17.2) 65(17.2) 65(17.2) 65(17.2) 65(17.2) 65(17.2) 65(17.2) 68(18.0) 51(13.5) 37(9.8) 27(7.1) 85(22.5) 50(13.2) 36(9.5) 25(6.6) 19(5.0) 52(13.7) 39(10.3) 28(7.4) 18(4.8) 65(17.2) 40(10.6) 28(7.4) 15(4.0) 12(3.2) 65(17.2) 65(17.2) 65(17.2) 65(17.2) 94(24.8) 85(22.5) 76(20.1) 70(18.5) 85(22.5) 80(21.1) 74(19.6) 54(14.3) 49(12.9) 69(18.2) 69(18.2) 69(18.2) 69(18.2) 77(20.3) 63(16.6) 57(15.1) 45(11.9) 66(17.4) 55(14.5) 44(11.6) 38(10.0) 28(7.4) 19(5.0) 15(4.0) 10(2.6) 95(25.1) 82(21.7) 75(19.8) 65(17.2) 89(23.5) 84(22.2) 77(20.3) 70(18.5) 62(16.4) 95(25.1) 74(19.6) 61(16.1) 43(11.4) 95(25.1) 84(22.2) 63(16.6) 50(13.2) 34(9.0) 40(10.6) 40(10.6) 30(7.9) 28(7.4) 60(15.9) 40(10.6) 40(10.6) 40(10.6) 30(7.9) 28(7.4) 60(15.9) 60(15.9) 42(11.1) 36(9.5) 70(18.5) 60(15.9) 60(15.9) 60(15.9) 42(11.1) 36(9.5) 7/10
8 SOLENOID OPERATED DIRECTIONAL VALV RESULT OF MEASUREMENTS TEST SYSTEMS 1. Testing Valve 2. Pump 3. Pressure Sensor 4. Flow Meter 5. Relief Valve 6. Throttle Valve TEST CONDITIONS Pressure: 160 kgf/cm 2 (2350 PSI) Flow Rate: 140 LPM (37 GPM) Viscosity: 35 cst SHIFT OVER TIME (SEC) MODEL T 1 T 2 SWH-G03-AC SERIES SWH-G03-DC SERIES SWH-G03-RF SERIES OPTION LS Electrical Surge Control Model Electrical surge waveform standard DC Solenoid. OPTION LS Valve model: SWH-G03- -D - -LS FEATURES Suppresses the surge voltage. Eliminates sparks between relay contacts. Extends the life of the relay contact. Effects Improves the reliability of the control relay. Extends the life of conventional relays. Can be operated with a miniature relay. The RAC rectifier built-in DC model eliminate sparks at the control relay contact. It can be directly operated with a PLC (programmable logic controller). Electrical surge controlled DC solenoid. 8/10
9 SOLENOID OPERATED DIRECTIONAL VALVE INSTALLATION DIMENSIONS SWH-G03 - -A -10- Models with AC solenoids Mounting Surface: ISO 4401-AC-05-4-A UNIT:mm(inch) MODEL WEIGHT kgs(lb) SWH-G03-C -A (9.02) SWH-G03-B -A (7.48) SWH-G Models with Dc, RF solenoids MODEL SWH-G03-C -D -10 SWH-G03-C -R -10 SWH-G03-B -D -10 SWH-G03-B -R -10 WEIGHT kgs(lb) 5.5(12.1) 4.0(9.68) 9/10
10 SOLENOID OPERATED DIRECTIONAL VALV INSTALLATION DIMENSIONS SWH-G03 - -A -20- Models with AC solenoids Mounting Surface: ISO 4401-AC-05-4-A UNIT:mm(inch) MODEL WEIGHT kgs(lb) SWH-G03 -C -A (9.02) SWH-G03 -B -A (7.48) SWH-G Models with DC, RF solenoids MODEL SWH-G03-C -D -20 SWH-G03-C -R -20 SWH-G03-B -D -20 SWH-G03-B -R -20 WEIGHT kgs(lb) 5.5(12.1) 4.0(9.68) 10/10
4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
DLG Series. Lowara SPECIFICATIONS APPLICATIONS ACCESSORIES MATERIALS. General Catalogue
DLG Series Submersible pumps with open impeller with grinder assembly for pumping sewage, liquids, wastewater in general and industrial sludge, draining of flooded excavations. SPECIFICATIONS Delivery:
4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
Terminal Contact UL Insulation Designation (provided with) style form system approval Flux tight
eatures A miniature PCB Power Relay. form A contact configuration with quick terminal type. 5KV dielectric strength, K surge voltage between coils to contact. Ideal for high rating Home Appliances of heating
Metal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
38BXCS STANDARD RACK MODEL. DCS Input/Output Relay Card Series MODEL & SUFFIX CODE SELECTION 38BXCS INSTALLATION ORDERING INFORMATION RELATED PRODUCTS
DCS Input/Output Relay Card Series STANDARD RACK MODEL 38BXCS MODEL & SUFFIX CODE SELECTION 38BXCS MODEL CONNECTOR Y1 :Yokogawa KS2 cable use Y2 :Yokogawa KS9 cable use Y6 :Yokogawa FA-M3/F3XD32-3N use
Aluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
Specification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)
High CV-value Long Life > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life Optimized designs available on request RoHS Compliant application Basic design Smoothing, energy storage,
Aluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
ACTORS IEC CONT Ex9C
IEC CONTCTORS Ex9C Ex9C Product Overview Features C-3 contactor ratings from 630 and C-1 contactor ratings to 800 voltages from 24~600, 50/60 Hz Full Non-Reversing (FVNR) and Full Reversing (FVR) 5 k @
NMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
FEATURES APPLICATION PRODUCT T IDENTIFICATION PRODUCT T DIMENSION MAG.LAYERS
FEATURES RoHS compliant. Super low resistance, ultra high current rating. High performance (I sat) realized by metal dust core. Frequency Range: up to 1MHz. APPLICATION PDA, notebook, desktop, and server
Ceramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Type 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
Multilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
ZLW Series. Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD
ZLW Series Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD 1 Application Apply as the transportation of liquids in the fields of air condition, heating, sanitary water, water treatment cooling,
SMD Transient Voltage Suppressors
SMD Transient Suppressors Feature Full range from 0 to 22 series. form 4 to 60V RMS ; 5.5 to 85Vdc High surge current ability Bidirectional clamping, high energy Fast response time
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Aerovox Corp. Type H High Voltage AC & DC Capacitors. Film Capacitors for Power Electronics Applications. RoHS Compliant. Highlights.
H Aerovox Corp. Film Capacitors for Power Electronics Applications Specifications Outline Drawing Capacitance Range: AC Voltage Range: DC Voltage Range: Temperature Range: Capacitance Tolerance: Dissipation
Model: MTZ22. Data. Cylinder count: 1 Displacement [m³/h]: 6,63 Cylinder capacity [cm³]: 38,1 RPM [min -1 ]: 2900 Weight [kg]: 21 Oil charge [dm³]: 1
![Model: MTZ22. Data. Cylinder count: 1 Displacement [m³/h]: 6,63 Cylinder capacity [cm³]: 38,1 RPM [min -1 ]: 2900 Weight [kg]: 21 Oil charge [dm³]: 1](/thumbs/90/102819400.jpg "Model: MTZ22. Data. Cylinder count: 1 Displacement [m³/h]: 6,63 Cylinder capacity [cm³]: 38,1 RPM [min -1 ]: 2900 Weight [kg]: 21 Oil charge [dm³]: 1")
Technical data Data Cylinder count: 1 Displacement [m³/h]: 6,63 Cylinder capacity [cm³]: 38,1 RPM [min -1 ]: 2900 Weight [kg]: 21 Oil charge [dm³]: 1 Oil type: 160PZ Crankcase heater type: PTC 35 W Maximum
2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
![2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%](/thumbs/78/78109689.jpg "2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%")
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction
TS-HA/HB Series 105 C, 3000 hours Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature:
Electrical Specifications at T AMB =25 C DC VOLTS (V) MAXIMUM POWER (dbm) DYNAMIC RANGE IP3 (dbm) (db) Output (1 db Comp.) at 2 f U. Typ.
Surface Mount Monolithic Amplifiers High Directivity, 50Ω, 0.5 to 5.9 GHz Features 3V & 5V operation micro-miniature size.1"x.1" no external biasing circuit required internal DC blocking at RF input &
Digital motor protection relays
Digital motor protection relays Specification DMP -S & DMP -Sa DMP -T & DMP -Ta Model No. DMP06-S/Sa DMP60-S/Sa DMP06-T/Ta DMP60-T/Ta Wiring Screw type Tunnel type Panel mount Unit or Extension Note1)
Bulletin 1489 UL489 Circuit Breakers
Bulletin 489 UL489 Circuit Breakers Tech Data 489-A Standard AC Circuit Breaker 489-D DC Circuit Breaker 489-A, AC Circuit Breakers 489-D, DC Circuit Breakers Bulletin 489-A Industrial Circuit Breaker
HIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
PEH C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life
PEH 169 85 C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life APPLICATION BASIC DESIGN Smoothing, energy storage, or pulse operation in telecommunication
Ceramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:
![± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:](/thumbs/85/91419422.jpg "± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:")
TS-UP Series 85 C, 3000 hours Compact size for general purpose and industrial applications 2 and 3 pin versions available 20mm lengths for low profile applications RoHS Compliant Rated Working Voltage:
Return Line Filters Type RTF10/25
Technical Data Type RTF1/25 Product Description Technical Data Construction Materials Filter head: Sealings: Aluminum NR (una-n ) Other sealing materials on request Options and Accessories Valve Clogging
Lowara SPECIFICATIONS
SH Series Centrifugal pumps entirely made of AISI 36 stainless steel according to EN 733 (ex DIN 24255). Designed to pump hot, cold and moderately aggressive liquids. Available versions: SHE Close-coupled
CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Polymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
UDZ Swirl diffuser. Product facts. Quick-selection. Swirl diffuser UDZ. Product code example:
UDZ Swirl diffuser Swirl diffuser UDZ, which is intended for installation in a ventilation duct, can be used in premises with a large volume, for example factory premises, storage areas, superstores, halls,
Accu-Guard II. SMD Thin-Film Fuse ELECTRICAL SPECIFICATIONS
Accu-Guard II is a version of Accu-Guard fuses for a wider range of current and voltage ratings. Con struct ed on alumina substrates, Accu-Guard II fuses display superior electrical, mechanical and en
Applications Water distribution
1 FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron designed to pump clean, chemically non-aggressive water and liquids. Available versions:
Transient Voltage Suppression Diodes: 1.5KE Series Axial Leaded Type 1500 W
Features 1. Reliable low cost construction utilizing molded plastic technique 2. Both bi-directional and uni-directional devices are available 3. Fast response time 4. Excellent clamping capacity 5. 1500
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
B37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Operating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
CASE DIMENSIONS: 1.27±0.13 (0.050±0.005) A 2.54 (0.100) 1.27 (0.050) 1.27 (0.050) 1.27±0.13 (0.050±0.005) B 3.81 (0.150) 1.27 (0.050) 1.27 (0.
MARKING (White marking on black body) Polarity Stripe (+) Code Rated Voltage The T4Z HRC4000 Medical Grade series is designed for use in non-critical medical applications. The T4Z product line is based
QUICKTRONIC PROFESSIONAL QTP5
osram.com QUICKTRONIC PROFESSIONA QTP5 ECG for T5/ 16mm, T8/ 26mm, DUUX fluorescent lamps QTP5 i.e. UMIUX T5 HO ES 01 Product Features: Up to 100.000 hours lifetime 1 amp start with optimized filament
Features. Terminal Contact Enclosure style style form Open type Dust cover Ears on cover Antirotation-tab Ears on top
SONG CHUN Features 20/2 general purpose Power Relays. SPDT, DPDT, TPDT contact configurations. DC & C coils are both available. Optional for flange covers, tapped core w/anti-rotation tab, indicator lamp,
LR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
THICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
LR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
LR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
COPELAND SCROLL AIR COOLED CONDENSING UNITS
R404A Refrigerant Scroll R507A Refrigerant R134A Refrigerant STANDARD UNIT WITH: Copeland ZB Scroll Compressors for medium temp applications on R404A/R507A/R134A Copeland ZB & ZF Scroll Compressors for
RSDW08 & RDDW08 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (Typ.) CAPACITOR LOAD (MAX.) RSDW08F-03 344mA 3.3V 2000mA 80% 2000μF RSDW08F-05
Applications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
S /5000 BTU/Hr. 1000/1500 Watt
763.576.32 SPEC-168 D763.422.2211 COOLING SEALED ENCLOSURE COOLING AIR CONDITIONERS Sealed Enclosure Cooling Air Conditioners SPECTRACOOL SLIM FIT INDOOR S6 1/17 BTU/Hr. 3/5 Watt S1 34/5 BTU/Hr. 1/15 Watt
Unshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.
![[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.](/thumbs/75/72614325.jpg "[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.")
Gear Pump High Performance Version GP up to, cm (.7 inch ) p max bar ( PSI) Speed from to RPM Technical Features Operating pressure bar, Peak pressure bar High-strength quality aluminum alloys pump with
REFERENCE. Surge Absorber Unit. Contactor AS R 50Hz AC220V. Separate Mounting Unit. Mechanical Interlock Unit
REFERENCE Contactors Surge Absorber Unit GM C 22 R 50Hz AC220V AS 1 GM Magnetic Contactors C AC coil D DC coil W Enclosed starter Rated current (AC3 440V) 9 40 100 300 12 50 125 400 18 65 150 600 22 75
Current Sense Metal Strip Resistors (CSMS Series)
Features: Range: 1mΩ to 100mΩ Low TCR as low as 75PPM High power rating Custom Values available RoHS Compliant and Halogen Free Operating Temperature: -55 C to +170 C Part Number Structure CSMS 0805 -
+85 C General Purpose Miniature Aluminum Capacitors
+85 C General Purpose Miniature Aluminum Capacitors Features- Increased CV Efficiency Non Polar Design Available (Special Order) General Specifications- Operating Temperature: -40 to +85 C Voltage Range:
High Current Chip Ferrite Bead MHC Series
High Current Chip Ferrite Bead MHC Series Features Combination of high frequency noise suppression with capability of handing high current. The current rating up to 6 Amps with low DC. Applications High
YJM-L Series Chip Varistor
Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
SMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
DEUTSCH 983 Series Filter Connectors MIL-DTL SERIES III
DEUTSCH 93 Series Connectors are MIL-DTL-3723 Series III style connectors meeting ESC, ESC15, and EN2997 standards. With medium-density insert arrangements, fine threaded coupling, and corrosion resistant
Contactors & Thermal Overload Relays
Contactors & Thermal Overload Relays TYPE DESIGNATIONS Contactors GM C D W Ampere Frame 9 40 100 300 12 50 125 400 18 65 150 600 22 75 180 800 32 85 220 Application - General / Standard R Reversing GMC(D)
Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
SMD Shielded Power Inductors SPIA Series. SPIA Series. Product Identification
SPIA Series SPIA series is an automatic assembly constructed power inductor which is shielded with ferrite core. It is ideal for portable device DC-DC converter line. Features RoHS Compliant Miniature
Transient Voltage Suppressor
Transient Suppressor Features Glass passivated junction Low incremental surge resistance, excellent clamping capability Underwriters Laboratory Recognition under UL standard for safety 497B: Isolated Loop
Aluminum Capacitors C, Tubular, Radial Lead
Aluminum Capacitors + 105 C, Tubular, Radial Lead FEATURES Wide temperature range Radial design in two and three lead configuration Ideal SMPS output filter PERFORMANCE CHARACTERISTICS Operating Temperature:
SMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)
Marking Outline: Low DCR, high rated current. Magnetic shielded structure Lead free product, RoHS compliant. RoHS Carrier tape packing, suitable for SMT process. SMT Widely used in buck converter, laptop,
SMD Wire Wound Ferrite Chip Inductors - SQC Series. SQC Series. Product Identification. Shapes and Dimensions
SMD Wire Wound Ferrite Chip Inductors - SQC Series SQC Series These miniature chip inductors, SQC Series, wound on a special ferrite core and are excellent to be used as choke coil in DC power supply circuits.
LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
No Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
Lowara APPLICATIONS MATERIALS. General Catalogue
FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron and impeller in AISI 36* stainless steel, designed to pump hot, cold and moderately
[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.
![[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.](/thumbs/93/111947477.jpg "[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.")
Gear Pump High Performance Version GP up to, cm (.7 inch ) p max bar ( PSI) Speed from to RPM Technical Features Nominal pressure bar, peak pressure bar High quality aluminum alloys pump with xial playe
High pressure centrifugal pumps
High pressure centrifugal pumps Wilo-Multivert MVI (North America) Series description H [ft] 3 1 MVI 1 1 1 MVI 1 MVI 3 MVI MVI 1 1 Q [m³/h] Wilo-Multivert-MVI Hz - North America Q [US gpm] H [m] 1 1 1
NO: 250 / 3 NC: 250 / 2 NO: 250 / 5 NC: 250 / 2 to IEC/EN DC 13 5) NO: 24 / 2 NC: 24 / 2 at 0.1 Hz DC 13 5) DC V/A
PCB relays Safety relays monostable OA 601, OA 60, OA 603 OA 601 OA 60 OA 603 Acc. to DIN EN 00, DIN EN 61810-1, DIN EN 60664-1 With forcibly guided contacts Clearance and creepage distances, contact-coil
Metal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
RF series Ultra High Q & Low ESR capacitor series
RF series Ultra High Q & Low ESR capacitor series FAITHFUL LINK Features Application» High Q and low ESR performance at high frequency» Telecommunication products & equipments:» Ultra low capacitance to
DATA SHEET Surface mount NTC thermistors. BCcomponents
DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped
Interference Suppression Capacitor
MOLDED BOX CONSTRUCTION, SUPPRESSION CAPACITOR, RADIAL LEAD FEATURES UL, CSA, VDE, CQC, CE, ENEC APPROVALS X2 SAFETY CAP CLASSIFICATION FOR USE IN ACROSS-THE-LINE APPLICATIONS METALLIZED POLYPROPYLENE
Return Line Filters. Return Line Filters Type RTF10/25. C Technology. Filtration. Product Description. Technical Data. Options and Accessories
Return Line Filters Return Line Filters Type RTF1/25 Product Description Technical Data Options and Accessories Construction Materials Valve Clogging Indicators Port Connection Flow Rating Operating Pressure
BMA SERIES Subminiature Blind Mate Connectors
SERIES Subminiature Blind Mate Connectors FEATURES The blindmate connectors are designed for blindmate applications up to Ghz. They have a slide-on, non-locking interface which ensures frequent matings
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES) (8) 95-8365 venkel.com Features: RoHS Compliant and Halogen Free Good Q values High SRF range: 1nH to 47uH Tolerance: ±.2nH, ±.3nH, ±2%, ±5%, ±1% High
NPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
C4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
FP series Anti-Bend (Soft termination) capacitor series
FP series Anti-Bend (Soft termination) capacitor series Features Applications» High performance to withstanding 5mm of substrate» For general digital circuit bending test guarantee» For power supply bypass
Ventilated Distribution Transformers
General Purpose Energy efficient dry-type transformers 600 Volt Class, isolation type, single and three phase, 1 through 00. Indoor and outdoor models available. Accessories and Optional Styles trostatic
CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Thin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
NTC Thermistor:SCK Series
Features. RoHS & HF compliant 2. Body size: Ф5mm ~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70
High Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
Surface Mount Multilayer Inductor
FETURES 0603, 0805, 0806 ND 1008 CSE SIZES HIGH CURRENT ND LOW RESISTNCE NEW "S" VERSION FOR INCRESED STURTION CURRENT UGRDED "H" VERSION FOR HIGHEST CURRENT REFLOW SOLDERING LICBLE CKGE FOR UTOMTIC ICKLCE
Sunlord. Wire Wound SMD Power Inductors SWCS Series SWCS XXXX -XXX T. Operating Temperature: -25 ~ +105 FEATURES APPLICATIONS PRODUCT IDENTIFICATION
Wire Wound SMD Power Inductors SWCS Series Operating Temperature: -25 ~ +105 FEATURES Various high power inductors are superior to be high saturation Suitable for surface mounting equipment APPLICATIONS
BALL VALVE NP - LEVE 754. Range of application: Temperature range: Perform standard: Order information: Paint: Soft seal Ball valve.
Soft seal Ball valve Unilateral spring washer Seat Float ball valve Flange PN16-40 DN15-200 Range of application: In industrial facilities, oil and chemical industry and related manufacturing industries
SPBW06 & DPBW06 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (TYP.) CAPACITOR LOAD (MAX.) SPBW06F-03 310mA 3.3V 0 ~ 1500mA 81% 4700μF SPBW06F-05