|
|
- Σέλευκος Καλαμογδάρτης
- 7 χρόνια πριν
- Προβολές:
Transcript
1 MAGICRON EA ENAMEL (Code No. : 273 series) Magicron EA is solid paint for top coat, with thermo setting acrylic, and melamin resin as binder and epoxy resin to increasing the cor rosion resistant. Can be used without primer surfacer. Special for electric equipment. --- Electric appliances, such at refrigerator, washing machine, air conditioner, etc High gloss retention. 2. Good chemical resistance. 3. High solid contents. 4. Good corrosion resistance. --- Any colour Ltr. --- APPLICATION METHOD Air spray or electrostatic spray. --- Magicron EA Thinner. --- THINNING RATIO 25 up to 30% by volume sec / NK2 cup. --- DRY FILM THICKNESS microns. --- THEORITICAL SPREADING 8 10 m²/ltr/coat. RATE --- SETTING TIME 10 minutes ºC x 30 mins or 160ºC x 20 mins. --- NON VOLATILE + 60% for white colour KU (25ºC). --- SPECIFIC GRAVITY for white colour (depend each colour). --- HARDNESS H to 2H (Mitsubishi pencil). --- FINENESS Below of 10 micron. --- HIDING POWER 40 micron after dry.
2 KANSAI NEW CHASSIS BLACK (Code No. : ) Kansai new chassis black is shyntetic paint for chassis of automobile, truck and machinary. Chassis truck. 1. Good adhesion. 2. Good water and oil resistance. 3. High flexibility. 4. Fast dry. 5. Good corrosion resistance. Any colour, full gloss, semi gloss or matt. 20 Ltr. APPLICATION METHOD Spray. Chassis Thinner THINNING RATIO 25 up to 30% by volume sec./nk2 cup. DRY FILM THICKNESS microns. THEORITICAL SPREADING 9 m²/ltr/coat. RATE SET TO TOUCH 15 mins at 30 C SEMI DRY 30 mins at 30 C HARD DRY 5 hrs at 30 C NON VOLATILE MATTER % KU (25 C). SPECIFIC GRAVITY FINENESS max 25 micron. HIDING POWER 20 micron after dry.
3 AMILAC NO. 2 MO ENAMEL (Code No. : 192 series) A hig grade one coat finish baking enamel based on alkyd resin and melamine resin as binder system. --- Topcoat for automobiles High gloss. 2. Good appearance. 3. Good outdoor durability. 4. Good chemcial resistance. 5. Good physical properties. 6. High solid content at the spray viscosity. --- Available in many solid colours Ltr. --- APPLICATION METHOD Air spray or electrostatic spray. --- Amilac Thinner No THINNING RATIO Enamel : thinner = 100 : (by weight) sec/nk DRY FILM THICKNESS microns. --- THEORITICAL SPREADING 8 10 m²/ltr/coat RATE --- OVERCOATING INTERVAL Min. 10 minutes C x 30 min.c --- NON VOLATILE 55 70% (dependent on the shade of color) KU (25 C). --- SPECIFIC GRAVITY 1,00 1,40 (dependent on the shade of color). --- PENCIL HARDNESS HB - F (Mitsubishi UNI pencil). --- FINENESS Max. 10 micron. --- HIDING POWER Max. 40 microns (except special colors).
4 AMILAC PRIMER SURFACER (Code No. : 198 series) Alkyd melamine paint with Epoxy as additivve to set the satisfy properties as primer surfacer. One coat primer without Red Primer with baking system. For automative assembling plant, for commercial automitive like bus, truck etc. Able to use for primer of Amilac. (melamine resin paints) 1. To increase the gloss of top coat. 2. Good adhesion to steel and top coat. 3. Flexible and tough. 4. Long protection period. Grey and others. 20 Ltr. APPLICATION METHOD Air spray or electrostatic spray. Amilac Thinner. THINNING RATIO Up to 30% by volume sec/nk-2. DRY FILM THICKNESS microns. THEORITICAL SPREADING 8 10 m²/ltr/coat. RATE SETTING TIME 10 mins before oven. 150ºC X 30 mins. NON VOLATILE 65 70%. Y ºKU (25ºC). SPECIFIC GRAVITY FINENESS 30 micron maximum.
5 HARDNESS H (Mitsubishi UNI pencil) AMILAC 1 M DEEP BLACK (Code No. : ) Alkyd modified melamine thermosetting 1 coat 1 bake. Steel parts especially fuel tank. 1. High gloss retention. 2. Good corrosion resistance. 3. Good Adhesion. Black gloss. 20 Ltr. APPLICATION METHOD By air spray or electrostatic gun spray. Amilac Thinner sec/iwata NK2 cup. DRY FILM THICKNESS microns. GLOSS 60ºC > º - 160ºC X 30 mins. NON VOLATILE % KU (25ºC). SPECIFIC GRAVITY FINENESS 10 micron maximum. HARDNESS B - HB (Mitsubishi UNI pencil) HIDING POWER (b/w) 30 microns maximum
6 AMILAC NO. 2 MC ENAMEL (Code No. : 192 series) A hig grade one coat finish enamel based on alkyd resin and melamine resin and epoxy resin as binder system. For electric appliances; air conditioner, electric fan, etc. 1. High gloss. 2. Good outdoor resistance. 3. Good chemcial resistance. 4. High solid content at the spray viscosity. 5. Tough and hard. Available in many solid colours. 20 Ltr. APPLICATION METHOD Air spray or electrostatic spray. Amilac Thinner No sec/nk-2. DRY FILM THICKNESS microns. THEORITICAL SPREADING 8 10 m²/ltr/coat. RATE SETTING TIME Min. 10 minutes. 150ºC x 20 min. NON VOLATILE 53 65% (dependent on the shade of color) VISCOSITY Approx. 64 KU (25ºC). SPECIFIC GRAVITY 1,00 1,40 (dependent on the shade of color). HARDNESS HB - F (Mitsubishi UNI pencil) FINENESS Max. 10 micron. HIDING POWER Max. 40 microns (except special colors).
7 AMILAC NO. 3 ENAMEL (Code No. : 193 series) - Alkyd melamin paint for top coat with oven dry Steel furniture (lockers, desks, chairs, shelves, etc). 2. Commercial automotive, and machinery High gloss retention. 2. Can be used at low temperature baking. 3. Good weathering resistance. 4. Good chemical resistance. --- Any colour for solid colour Kg. --- APPLICATION METHOD Air spray or electrostatic spray. --- Amilac Thinner. --- THINNING RATIO 25 30% by weight sec/nk DRY FILM THICKNESS Minimum 30 microns. --- THEORITICAL SPREADING 8 10 m²/ltr/coat. RATE --- SETTING TIME 7 mins before oven ºC x 30 mins. --- NON VOLATILE 53 65% (depends on the color) --- VISCOSITY KU (25ºC). --- SPECIFIC GRAVITY 1,00 1,40 (depends on the color). --- HARDNESS HB - F (Mitsubishi UNI pencil). --- FINENESS Max. 10 micron. --- HIDING POWER 40 micron maximum after dry (exception for special colour). --- GLOSS/APPEARANCE Also available semi gloss and matt.
8 MAGICRON ALC-2 BASE COAT / CLEAR Magicron ALC-2 is thermosetting acrylic modified melamine and epoxy resin, outstanding performance for aluminium wheel coating Top coat for aluminium wheel. 1. Good gloss retention. 2. Good chemicals resistance. 3. Good adhesion on aluminium wheel substrate. 4. Good corrosion resistance. Base coat metallic color as undercoat. Clear coat transparent as Top Coat. 20 Ltr APPLICATION METHOD Air spray or electrostatic gun spraying. Magicron ALC-2 Thinner. Base coat Thinner ( ) Top coat Thinner ( ) ( ) THINNING RATIO Base Coat : 20 40%. Clear Coat : 20 30%. Base Coat : sec/nk2--> Bake 140ºC x 20. Clear Coat : sec/nk2 --> Bake 140ºC x 20. DRY FILM THICKNESS Base Coat : μ. Clear Coat : μ dft. PAINTING SYSTEM 2 coat 2 bake. 140ºC x mins KU (25ºC). SPECIFIC GRAVITY HARDNESS Min Hb
9 MAGICRON AL-2500 BASE COAT 2 CIB Magicron ALC-2500 is thermosetting acrylic modified melamine and epoxy resin, good adhesion performance for aluminium wheel. Base coat aluminium wheel. 1. Good applicability. 2. Good chemicals resistance. 3. Good gloss retention. Base coat metallic color as undercoat. 20 Ltr/ APPLICATION METHOD Air spray or electrostatic gun spraying. Magicron ALC-2500 Thinner ( ). THINNING RATIO Base Coat : 30 50%. Base Coat : sec/nk2. DRY FILM THICKNESS μ. RECOMMEND PAINTING 2 coat 1 bake. Wet on Wet Top Coat. SYSTEM TOP COAT Magicron ALC-2 Clear. 140ºC x mins KU (25ºC). SPECIFIC GRAVITY HARDNESS Min Hb PAINTING SYSTEM 1. Primer Coat ---> Baking. 2. Magicron AL-2500 Base Coat W/W. 3. Magicron ALC-2 Clear ---> Baking. HIDING POWER Max 20 μ ( DFT) LIFE TIME Keep indoor use for 3 months. (25 C)
10 AQUASOL BLACK. T (Code No. : ) Water based epoxyester and melamine resin paint. Dipping type under coat for automobile body frame, metal parts, etc. 1. Good resistance againts corrosive condition. 2. Excellent water and humidity resistance. 3. Touch and hard. 4. Good physical property. Black. APPLICATION METHOD Dipping THINNING RATIO Aquasol Black = 100 Aquasol Thinner = 5 Water = 5 Water ''/NK-2 Cup at 30ºC. DIPPING TIME 5 10''. SETTING TIME 5 minutes. 170 C x 20 min. ph 7,5 8,5. RECOMMEND OF FILM μ/coat. THICKNESS ALLOWABLE TEMPERATURE 18 35ºC (original paint and Bath paint). NON VOLATILE IN BATH %. PAINT 20 ltr, 180 ltr.
11 MAGICRON MO METALLIC BASE 272 SERI JENIS Cat untuk warna metallic dimana cat ini berfungsi sebagai cat dasar yang membentuk metallic. Sebagai bahan dasar digunakan thermosetting acrylic resin dan melamine resin sebagai pengikat. Proses pemanasan dilakukan setelah dilapisi dengan MAGICRON MO CLEAR. PEMAKAIN Mobil. KEISTIMEWAAN - Pembentukan metalic yang baik. - Keras dan elastis. WARNA Dapat dibuat untuk semua warna metallic. KEMASAN 20 liter. CARA PEMAKAIN Umumnya dengan spray gun biasa. MAGICRON 100 = 110, 120 Perbandingan cat dengan thinner = 100 : KEKENTALAN SPRAY detik/nk-2. KETEBALAN LAPISAN Sesudah kering mikron. DAYA SEBAR 1 liter 8 10 m²/lapis. WAKTU TUNGGU Sebelum di oven minimum 10 menit. WAKTU PENGERINGAN 150ºC x 30 menit. (sesudah dilapisi MAGICRON MO CLEAR) KEPADATAN CAT + 41%. KEKENTALAN CAT + 63 KU (25ºC) BERAT JENIS (silver metallic) DAYA TUTUP Sesudah kering mikron. KETERANGAN Tanpa menggunakan MAGICRON MO CLEAR tidak direkomendasikan.
12 MAGICRON PCM ENAMEL (Code No. : 275 series) Magicron PCM is solid paint for to coat, with thermosetting acrylic and melamin resin to increasing the corrosion resistant. Can be used without primer surfacer special for electric equipment. 1. High gloss retaintion. 2. Good chemicals resistance. 3. High solid contents. 4. Good corrosion resistance. Any colour. 20 Ltr and 23 kg. APPLICATION METHOD Air spray. Magicron PCM thinner. THINNING RATIO Up to 10% by volume sec (Iwata NK2 Cup) DRY FILM THICKNESS μ. Baking 220ºC + 10ºC in 60 second. NON VOLATILE MATTER + 60% for white colour. VISCOSITY + 70 KU (25ºC). SPECIFIC GRAVITY for white colour. HARDNESS H 2 H (Mitsubishi pencil) FINNESS Below of 10 micron. HIDING POWER 40 micron max (after dry)
13 MAGICRON MO CLEAR JENIS Cat lapisan luar untuk warna metallic (MAGICRON MO CLEAR BASE) dimana cat berfungsi sebagai pelindung agar pembentukan metallic tidak teroksidasi dengan udara dan juga untuk mendapatkan daya kilau yang tinggi. Sebagai bahan dasar dipergunakan resin thermosetting acrylic dan bahan pengikat melamine resin, dengan menggunakan pengeringan dengan sistim pemanasan. PEMAKAIAN Mobil. KEISTIMEWAAN - Mempertinggi daya kilau. - Memperindah permukaan metallic. - Tahan terhadap bahan kimia. - Tidak mudah menguning. - Mempunyai daya tahan cuaca yang baik. WARNA Bening. KEMASAN 20 liter. CARA PEMAKAIN Dispray. MAGICRON 200, 210 Perbandingan cat dengan thinner = 100 : KEKENTALAN SPRAY detik/nk-2. KETEBALAN LAPISAN Sesudah kering mikron. DAYA SEBAR Sebelum dioven 10 menit. WAKTU PENGERINGAN 150ºC x 30 menit. KEPADATAN CAT + 50%. KEKENTALAN CAT + 60 KU (25ºC) BERAT JENIS KEKERASAN CAT H 2H (pincil Mitsubishi UNI)
14 PCM PAINT / KP ENAMEL ( Code No: 311 series ) JENIS Cat yang terbuat dari resin Polyester, Melamine dan Epoxy. KEGUNAAN Untuk precoating steel dari produk produk bangunan. SIFAT - SIFAT - Mempunyai sifat fisika yang baik. - Mempunyai ketahanan gloss yang baik. - Mempunyai ketahanan cuaca yang baik. SPEC STANDAR VISCOSITAS SEC Ford Cup 4 / 25ºC. BERAT JENIS PADATAN %. WARNA Tersedia dalam banyak warna. APPLIKASI CARA APLIKASI Barcoater No.16; Natural roll coating. PENGENCER KP Colour No Thinner. VISCOSITAS APLIKASI sec Ford Cup 4 / 25ºC. PERB PENGENCER % by weight. TEBAL LAPISAN CAT μ. WAKTU PENGERINGAN 225ºC x 60. KUALITAS LAPISAN CAT RUBBING (GOSOKAN) (60x) atau lebih. (DENGAN XYLENE) GLOSS / DAYA KILAP 85 < KEKERASAN H < (Mitsubishi Uni) ADHESI 100 / 100 ( 1 x 1 mm x 100 ) BENTURAN 50 / 500 ( cm / gram ) KEMASAN 23 Kg. TITIK NYALA 43.9ºC.
15 ASCA COAT 400 NC BLACK Waterborne epoxy ester paint type for interior and exterior. 1. Excellent anti corrosion performance. 2. Water soluble and fire safety. 3. Applicable in dipping system. USAGE Automobile parts excellent anti corrosion. APPLICATION Air Spray Dipping Thinner D I Water D I Water / Additive : 2/1 Thinning Ratio 10 20% 15 25% Viscosity 20ºC sec sec DRYING CHARACTERISTIC 20ºC 50ºC 100ºC Set to Touch 60 minutes 15 minutes - Drying Hard 5 hours 1 hours 10 minutes Baking Oven 90ºC x 20 minutes DIPPING TANK CONDITION CHECK Temperature 20-32ºC Check 2 time / day Viscosity sec/nk2 Before production ph time / day NV time / d PAINT CONDITION 1. One component type 2. Color Black 3. Specific Gravity NV Visc. Supply (KU/25ºC)
16 PAINT PERFORMANCE SPCC SD (0.8T) Pretreatment PB # 144 Dipping for 3 minutes and after 3 day for testing. Test Item Result Thickness (μ) Baking Oven Hardness Adhesion Impact Test Humidity Resistance Salt Spray Test Alkali Resistance Oil Resistance Out Door Test ºC x 20 minutes F 100/100 (M-2.5) 0.5 inch x 500 gr x 30 cm 50ºC, 98% RH, 48 hrs 120 hours / max 3mm both side 0.1 N NaOH 20ºC 8 hour ( OK ) 8 hours ( OK ) immer system W-O-M 240 hours PAINT COMPARASION AQUASOL ASCA COAT (1 st ) ASCA COAT (2 nd) COMPETITOR Baking Oven 170ºC x 20 minutes 90ºC x 20 minutes 90ºC x 20 minutes - Chalking Test Max 2 months Max 6 months 6 months - Salt Spray Test 72 hours 120 hours 240 hours - ISO Enviromental Cr content Free Content Content
17 EVAPORATOR PAINT ( Code No: ) Acrylic Modified Epoxy & Melamine resin 1. Electric appliances, such as refrigerator, evaporator washing machine Air Conditioner. 2. Steel furniture, such as locker, cabinet etc. 3. Building material, such as steel door etc. 1. Excellent adhesion on Aluminium Substrate. 2. Excellent flexibility properties for bending. 3. Good applicability for all kind of painting machine. Special order APPLICATION METHOD Air spray or electrostatic spray. THINNING RATIO 20 up to 30 % by volume. Evaporator Thinner. VISCOSITY SPRAY ''/NK-2 Cup at 30ºC. DRY FILM THICKNESS μ ( depends on color) SETTING TIME 10 minutes. 150ºC x 30 mins. NON - VOLATILE 40 60% (depends on color) KU (25 C) SPECIFIC GRAVITY 1.00 ( depends on color) PENCIL HARDNESS H < ( Mitsubishi pencil ) 20 ltr
18 KS 720 PRIMER ( Code No: 143 xxx ) Phenol Alkyd Resin Primer. 1. Free form heavy metal Component such as lead, chrome an mercury atc. 2. Fast drying. 3. Good wet on wet applicability. 4. Wide top coats can be applicable acrylic lacquer, phtalic resin enamel and melamin resin enamel can be available. 5. Good adhesion. 6. Good corrosion resistance. Yellow and Grey. 20 kg. APPLICATION METHOD Application Method Air Spray Airless Spray Thinner Enamel No.200 Thinner Thinner Ratio % % Apllication viscosity sec /NK sec/nk 2 Dry Film Thickness μ Coverage Recoat Interval g/m² 20 min 3 month 30 mins. NON - VOLATILE %. SPECIFIC GRAVITY
19 RETAN PG 60 NATURAL YELLOW (Code No. : ) A weather resisting Polyurethane Enamel based on acrylic polyol resin and polyisocianate hardener. A top coat finish color for industrial uses. 1. Excellent gloss and color retention. 2. Excellent durability in chemicals and marine environment. 3. Good applicability. 4. Hight build and heavy duty coatings. 5. Provides hardener, abrasion resistance. Natural Yellow, etc KU (25ºC) NON FOLATILE MATTER %. SPECIFIC GRAVITY PACKING 5 ltr / set 2 packing Base / Hardener. Retan PG 60 Thinner ( ) THINNING RATIO % ( Volume ) air spray % by airless sec / NK2 cup. DRY FILM THICKNESS 35 μ 45 μ. SET TO TOUCH 10 minutes. SEMI DRY 4 hours. HARD DRY 6 hours 130ºC. OVERCOATING INTERVAL Over Night. TIME MIXING RATIO Base / Hardener = 4 /1 ( by volume ) POT LIFE 3 hour at 30ºC.
20 TEMPERATURE RESISTANCE 100ºC (dry) SUPER FTALIT (Code No. : 118 series) A finish coat based on short oil alkyd resin. 1. For construction machines. 2. For Industrial machines. 3. For transport machines. 1. Quilk dry. 2. Good weathering resistance. 3. Good physical property. Available in many colors KU (25ºC) NON FOLATILE MATTER (white). SPECIFIC GRAVITY (white). PACKING 20 kg. Super Ftalit Thinner ( ) THINNING RATIO % by Weight sec / NK2 cup. DRY FILM THICKNESS 30 μ 40 μ. SET TO TOUCH 15 minutes at 30 C SEMI DRY 30 minutes at 30 C HARD DRY 5 hours at 30 C OVERCOATING INTERVAL Min. 6 hours at 30ºC. Max. 7 days at 30ºC.
21 SKZ PRIMER (Code No. : 143 xxx) A primer coat based on modified alkyd primer with zinc chromate rust preventive pigment. 1. A primer coat for construction machines. 2. A primer coat for industrial machines. 3. A primer coat for swichboards. 1. Good rust preventive property. 2. Fast drying. 3. Good compatibility with subsequent coat e.g. Short oil alkyd resin, polyurethane resin enamel. 4. Good Applicability. Yellow, Grey and Black KU (25ºC) NON VOLATILE %. SPECIFIC GRAVITY PACKING 25 kg. KZ Primer Thinner ( ) THINNING RATIO % by Weight for air spray sec / NK2 cup. DRY FILM THICKNESS 30 μ 40 μ. SET TO TOUCH 10 minutes at 30 C SEMI DRY 20 minutes at 30 C HARD DRY 2 hours at 30 C OVERCOATING INTERVAL Over 16 hours at 30ºC.
22 KS 720 PRIMER (Code No. : 143 xxx) Phenol Alkyd Resin Primer. 1. A primer coat for construction machines. 2. A primer coat for industrial machines. 3. A primer coat for swichboards. 1. Free form heavy metal Component such as lead, chrome an mercury atc. 2. Fast drying. 3. Good wet on wet applicability. 4. Wide top coats can be applicable acrylic lacquer, phtalic resin enamel and melamin resin enamel can be available. 5. Good adhesion. 6. Good corrosion resistance. Yellow, Grey and Black KU (25ºC) NON VOLATILE %. SPECIFIC GRAVITY PACKING 25 kg. KZ Primer Thinner ( ) THINNING RATIO % Air Spray % Airless Spray sec / NK2 cup Air Spray sec / NK2 cup by Airless Spray DRY FILM THICKNESS 30 μ 40 μ. 30 minutes. THEORITICAL SPREADING + 5 m²/ Kg / Coat RATE OVERCOATING INTERVAL Over 1 hour. TIME
23 YK COAT Solid baking enamel based on special thermosetting Acrylic Rosin, crosslinked with Melamine Resin and modified with Epoxy Resin. Special designed for Zipper. 1. Good chemical Resistance. 2. Excellent Resistance to Dry Clean Chemical. 3. Good Corrosion Resistance. White & Black color, other colors are available. APPLICATION METHOD Air spray. YK Coat Thinner. PACKING 5 Ltr; 20 Ltr. THINNING RATIO % sec / NK-2. DRY FILM THICKNESS 20 μ + 5 μ. BAKING CONDITION 160 C x 20 minutes. HARDNESS H 2H (Mitsubishi UNI Pencil) NON VOLATILE % for white color. VISCOSITY KU / 25 C SPECIFIC GRAVITY for white color.
Metal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Διαβάστε περισσότεραFixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Διαβάστε περισσότεραCarbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
Διαβάστε περισσότεραMultilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Διαβάστε περισσότεραCurrent Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
Διαβάστε περισσότεραFixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Διαβάστε περισσότεραThin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Διαβάστε περισσότεραData sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Διαβάστε περισσότεραTHICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Διαβάστε περισσότεραMAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
Διαβάστε περισσότεραHIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
Διαβάστε περισσότεραCSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Διαβάστε περισσότεραCSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Διαβάστε περισσότεραΧΑΛΥΒΔΟΣΩΛΗΝΕΣ ΕΛΙΚΟΕΙΔΟΥΣ ΡΑΦΗΣ SPIRALLY WELDED STEEL PIPES
Βιομηχανικός Όμιλος Επεξεργασίας & Εμπορίας Χάλυβα (ΒΟΕΕΧ) Industrial Steel Processing & Trading Group (ISPTG) ΧΑΛΥΒΔΟΣΩΛΗΝΕΣ ΕΛΙΚΟΕΙΔΟΥΣ ΡΑΦΗΣ SPIRALLY WELDED STEEL PIPES EXT DIAMETER INCHES ΕΞΩΤ ΔΙΑΜΕΤΡΟΣ
Διαβάστε περισσότεραΣΩΛΗΝΕΣ ΕΥΘΕΙΑΣ ΡΑΦΗΣ LONGITUDINALLY WELDED STEEL PIPES
Βιομηχανικός Όμιλος Επεξεργασίας & Εμπορίας Χάλυβα (ΒΟΕΕΧ) Industrial Steel Processing & Trading Group (ISPTG) ΣΩΛΗΝΕΣ ΕΥΘΕΙΑΣ ΡΑΦΗΣ LONGITUDINALLY WELDED STEEL PIPES EXT DIAMETER INCHES ΕΞΩΤ ΔΙΑΜΕΤΡΟΣ
Διαβάστε περισσότεραCeramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication
Διαβάστε περισσότεραMelf Carbon Film Resistor MMC Series
Melf Resistor Melf Carbon Film Resistor MMC Series Coating color: Beige Features - Tolerance up to ±2%. - Wide resistance range:1ω to 10MΩ. Type Dimension TYPE L D C S 0102 2.00±0.10 1.30±0.10 0.55±0.10
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
Διαβάστε περισσότεραMetal Film Flame-Proof Resistors
Features -Low Noise -Low TCR from ±15~100PPM/ -High Precision from ±0.1%~1% -Complete Flameproof Construction UL-1412. -Coating meets UL94V-0 Applications -Telecommunication -Medical Equipment -Consumer
Διαβάστε περισσότεραNTC Thermistor:TTC3 Series
Features. RoHS compliant 2. Halogen-Free(HF) series are available 3. Body size: Ф3mm 4. Radial lead resin coated 5. Operating temperature range: -40 ~+25 6. Wide resistance range 7. Cost effective 8. Agency
Διαβάστε περισσότεραThin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to ±5PPM/C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
Διαβάστε περισσότεραRC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
Διαβάστε περισσότεραNo Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
Διαβάστε περισσότεραRSDW08 & RDDW08 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (Typ.) CAPACITOR LOAD (MAX.) RSDW08F-03 344mA 3.3V 2000mA 80% 2000μF RSDW08F-05
Διαβάστε περισσότεραZLW Series. Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD
ZLW Series Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD 1 Application Apply as the transportation of liquids in the fields of air condition, heating, sanitary water, water treatment cooling,
Διαβάστε περισσότεραNMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
Διαβάστε περισσότεραSMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
Διαβάστε περισσότεραInjection Molded Plastic Self-lubricating Bearings
Injection Molded Plastic Self-lubricating Bearings Injection Molded Plastic Self-lubricating Bearings CSB-EPB : Injection molded thermoplastic P-P CSB-EPB Plastic Compound Bearings RoHS Structure CSB-EPB
Διαβάστε περισσότεραThin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) RoHS Compliant includes all homogeneous
Διαβάστε περισσότερα1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat (Epoxy)
ARN series Thin Film High Precision Chip Resistor Features» Advanced thin film technology» Very tight tolerance down to ±0.01%» Extremely low TCR down to ±5ppm/» Wide resistance range 1ohm-3Mega ohm» Miniature
Διαβάστε περισσότεραData sheet Thin Film Chip Inductor AL Series
Data sheet Thin Film Chip Inductor AL Series Scope - 0201 and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and
Διαβάστε περισσότεραThin Film Precision Chip Resistor-AR Series
hin Film Precision Chip Resistor-AR Series Construction L D1 3 4 5 6 D2 9 8 7 1 2 1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat
Διαβάστε περισσότεραMetal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
Διαβάστε περισσότερα4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
Διαβάστε περισσότεραDC-DC Constant Current Step-Down LED driver LDD-300L LDD-350L LDD-500L LDD-600L LDD-700L CURRENT RANGE
SPECIFICATION ORDER NO. LDD-00L LDD-0L LDD-00L LDD-00L LDD-700L CURRENT RANGE 00mA 0mA 00mA VOLTAGE RANGE Note. ~ VDC for LDD-00~700L/LW ; ~ 8VDC for LDD-00~700LS CURRENT ACCURACY (Typ.) ±% at VDC input
Διαβάστε περισσότεραThin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) Type EI Size Power Rating at 70
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Διαβάστε περισσότεραCurrent Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Διαβάστε περισσότεραSpecification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)
High CV-value Long Life > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life Optimized designs available on request RoHS Compliant application Basic design Smoothing, energy storage,
Διαβάστε περισσότεραUnshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
Διαβάστε περισσότεραWLCW1005 SMD Wire Wound Ceramic Chip Inductors
WCW1005 SMD Wire Wound Ceramic Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WCW1005 Series_V5.0 Mar. 2016 Features 1. Standard chip size bobbin with
Διαβάστε περισσότεραApplications Water distribution
1 FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron designed to pump clean, chemically non-aggressive water and liquids. Available versions:
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Calchip s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Calchip s design provides high, excellent Q, and superior temperature stability. This highly
Διαβάστε περισσότεραNTC Thermistor:SCK Series
Features. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φmm:-40~+70
Διαβάστε περισσότεραHigh Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
Διαβάστε περισσότεραPb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. FEATURES The monolithic construction performs high reliability and ensures a closed magnetic flux in a component avoids magnetic and interference
Διαβάστε περισσότεραCurrent Sensing Chip Resistor
Features -3 atts power rating in 1 att size, 1225 package -Low CR of ±100 PPM/ C -Resistance values from 1m to 1 ohm -High purity alumina substrate for high power dissipation -Long side terminations with
Διαβάστε περισσότεραΣύνθετα Υλικά: Χαρακτηρισμός και Ιδιότητες
Σύνθετα Υλικά: Χαρακτηρισμός και Ιδιότητες Εργαστηριακή Άσκηση 4: Θεωρία κατασκευής πολυστρώτων πλακών Διδάσκοντες: Ν. Μ. Μπάρκουλα, Επ. Καθηγήτρια, Δρ. Μηχ/γος Μηχανικός Εργαστηριακή Υποστήριξη: Τ. Μπέκας,
Διαβάστε περισσότερα0.635mm Pitch Board to Board Docking Connector. Lead-Free Compliance
.635mm Pitch Board to Board Docking Connector Lead-Free Compliance MINIDOCK SERIES MINIDOCK SERIES Features Specifications Application.635mm Pitch Connector protected by Diecasted Zinc Alloy Metal Shell
Διαβάστε περισσότεραCeramic PTC Thermistor: PH Series
Features 1. RoHS compliant 2. Self-regulating heating element 3. Constant temperature 4. Simple circuit 5. Suitable for clamp-contacting 6. Stable over a long life 7. Operating temperature range:-40 ~
Διαβάστε περισσότεραMetal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Διαβάστε περισσότεραDC-DC Constant Current Step-Down LED driver LDD-300L LDD-350L LDD-500L LDD-600L LDD-700L CURRENT RANGE
SPECIFICATION ORDER NO. LDD-00L LDD-0L LDD-00L LDD-00L LDD-700L CURRENT RANGE 00mA 0mA 00mA 00mA VOLTAGE RANGE Note. ~ VDC for LDD-00~700L/LW ; ~ 8VDC for LDD-00~700LS CURRENT ACCURACY (Typ.) ±% at VDC
Διαβάστε περισσότεραThin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to PPM/ C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
Διαβάστε περισσότεραShape Square. Tolerance of Varistor Voltage For Varistor voltage<68, Special For Varistor voltage 68, 10% Lead Wire Type Straight Cut Lead
Leaded Varistor for urge uppression VP eries Operating Temp. : -40 ~ +85 FEATURE Fast response Excellent clamping ratio, high peak current and pulse energy withstanding characteristics, providing strong
Διαβάστε περισσότεραNTC Thermistor:TSM type
Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended
Διαβάστε περισσότεραPrecision Metal Film Fixed Resistor Axial Leaded
Features EIA standard colour-coding Non-Flame type available Low noise and voltage coefficient Low temperature coefficient range Wide precision range in small package Too low or too high ohmic value can
Διαβάστε περισσότεραΧαμηλές Βιβλιοθήκες Low Cabinets
Δελτίο Χαρακτηριστικών Είδους Item Data Sheet Χαμηλές Βιβλιοθήκες Low Cabinets Χαμηλές Βιβλιοθήκες (Μπουφέ) από πλαίσια μελαμίνης σε διάφορα χρώματα επιλογής, επενδυμένα με PVC. Ο σκελετός και η πλάτη
Διαβάστε περισσότεραSiam Pacific Electric Wire & Cable Co., Ltd.
PRODUCT AND APPLICATIONS OF ENAMELED WIRE TYPE COMMERCIAL NAME INSULATION TYPE BASE COATED OVER COATED TOP COATED THERMAL CLASS ( C) WIRE RANGE (S) APPLICATIONS PVF POLYVINYL FORMAL - - 105 SWG 9 ~ SWG
Διαβάστε περισσότεραTrimmable Thick Film Chip Resistor
rimmable hick ilm Chip Resistor R Series rimmable hick ilm Chip Resistor Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. eatures
Διαβάστε περισσότερα2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Διαβάστε περισσότεραRoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. PRODUCT DETAIL Electrical Characteristics μh L (Min) Q MHz (Min) SRF Ω DCR IDC ma TEST FREQ: MHz TEST LEVEL: 100 mv Test Instruments HP4291
Διαβάστε περισσότερα60 61 62 63 64 65 Ο Δ Η Γ Ι Ε Σ Σ Υ Ν Τ Η Ρ Η Σ Η Σ Τ Ω Ν Κ Ο Υ Φ Ω Μ Α Τ Ω Ν Ι Ν S T R U C T I N O N S C O N C E R N I N G Τ Η Ε C A S E M E N T S M A I N T E N A N C E Ο τακτικός καθαρισμός των βαμμένων
Διαβάστε περισσότεραAvailable Specification & Size of CSAC Aluminium Products
Available Specification & Size of CSAC Aluminium Products 1. Casting Ware Application Specification Alloy Temper or sand mode, shell mode & metal mode. JIS H5202 AC2A, AC2B, AC3A, AC4B, AC4C, AC7A, AC7B,
Διαβάστε περισσότερα± 20% ± 5% ± 10% RENCO ELECTRONICS, INC.
RL15 RL16, RL17, RL18 MINIINDUCTORS CONFORMALLY COATED MARKING The nominal inductance is marked by a color code as listed in the table below. Color Black Brown Red Orange Yellow Green Blue Purple Grey
Διαβάστε περισσότεραCreative TEchnology Provider
1 Oil pplication Capacitors are intended for the improvement of Power Factor in low voltage power networks. Used advanced technology consists of metallized PP film with extremely low loss factor and dielectric
Διαβάστε περισσότεραBiodiesel quality and EN 14214:2012
3η Ενότητα: «Αγορά Βιοκαυσίμων στην Ελλάδα: Τάσεις και Προοπτικές» Biodiesel quality and EN 14214:2012 Dr. Hendrik Stein Pilot Plant Manager, ASG Analytik Content Introduction Development of the Biodiesel
Διαβάστε περισσότεραSMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008
SMD Wire Wound Ferrite Chip Inductors - LS Series LS Series LS Series is the newest in open type ferrite wire wound chip inductors. The wire wound ferrite construction supports higher SRF, lower DCR and
Διαβάστε περισσότεραLowara APPLICATIONS MATERIALS. General Catalogue
FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron and impeller in AISI 36* stainless steel, designed to pump hot, cold and moderately
Διαβάστε περισσότεραOil grooved pads PFO series
Oil grooved pads PFO series Connector type Top Side Pad with locking fitting PFO K φ20 ~ 40 P237 Barb connector PFOTK PFOYK Pad with spring fitting NAPFO S Stroke(mm) φ20 ~ 40 6,15,30 P239 Female screw
Διαβάστε περισσότεραNTC Thermistor:SCK Series
Features. RoHS & HF compliant 2. Body size: Ф5mm ~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70
Διαβάστε περισσότεραCurrent Sensing Metal Chip Resistor
eatures -SMD designed for automatic insertion -High power rating in small size -Low resistance resistor for current detection -Metal foil construction ensures high reliability and performance with very
Διαβάστε περισσότεραFLAME-X 950 (N)HXCH FE180/E90 0,6/1kV DIN VDE 0266, DIN
Halogen- free low smoke fire resistant security power cables with copper concentric conductor CONSTRUCTION Conductors: bare copper conductor, circular solid class 1 (RE) or stranded circular or circular
Διαβάστε περισσότεραRJJ Miniature Aluminum Electrolytic Capacitors RJJ. Series RJJ High-Frequency, Low Impedance, Standard Type. Radial Type
352 Elna Corrections 80-95 /6/98 :55 AM Page Miniature Aluminum Electrolytic Capacitors Series High-Frequency, Low Impedance, Standard Type For high reliability applications, Environmentally safe. High-frequency,
Διαβάστε περισσότεραTransient Voltage Suppression Diodes: 1.5KE Series Axial Leaded Type 1500 W
Features 1. Reliable low cost construction utilizing molded plastic technique 2. Both bi-directional and uni-directional devices are available 3. Fast response time 4. Excellent clamping capacity 5. 1500
Διαβάστε περισσότεραCPTC Thermistor:PS Series
Features 1. RoHS compliant Two versions available PSA versions are uncased, metallized disk for clamp-contacting PSB versions are cased 2. Voltage ratings: from 160V AC to 500V AC 3. Stable over a long
Διαβάστε περισσότεραApplications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Διαβάστε περισσότεραHigh Voltage Thick Film Chip Resistor
Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Highly reliable multilayer electrode construction -Higher component and
Διαβάστε περισσότερα1/10page. Standard number MW35C. Date of publish 01/01/2014. Date of Revision. Approved. Approval Examination Issue. Publish
1/10page Standard name MW35C Standard number CX14010701 Date of publish 01/01/2014 Date of Revision Approved Publish Approval Examination Issue Yonghong WAN Mingsheng LIU Ping HUANG 2/10page Revision form
Διαβάστε περισσότεραAxial Leaded Power Inductor. TIA0204/0307/0410 Series. Features. Applications. Color Coding
Axial Leaded Power Inductor Axial Leaded Power Inductor Features Design to be compact, small and light-weight Wide range of inductance Contribute to be high and self-resonant frequency Tapping type for
Διαβάστε περισσότεραLowara SPECIFICATIONS
SH Series Centrifugal pumps entirely made of AISI 36 stainless steel according to EN 733 (ex DIN 24255). Designed to pump hot, cold and moderately aggressive liquids. Available versions: SHE Close-coupled
Διαβάστε περισσότεραΠΡΟΣΩΡΙΝΕΣ ΕΘΝΙΚΕΣ ΤΕΧΝΙΚΕΣ ΠΡΟ ΙΑΓΡΑΦΕΣ
ΕΛΛΗΝΙΚΗ ΗΜΟΚΡΑΤΙΑ Υ.ΠΕ.ΧΩ..Ε. ΠΡΟΣΩΡΙΝΕΣ ΕΘΝΙΚΕΣ ΤΕΧΝΙΚΕΣ ΠΡΟ ΙΑΓΡΑΦΕΣ ΠΕΤΕΠ 14-01-13-01 14 Επεµβάσεις (επισκευές ενισχύσεις) 01 Κατασκευές από οπλισµένο Σκυρόδεµα 13 Ενισχύσεις αποκαταστάσεις µε χαλύβδινα
Διαβάστε περισσότεραSmaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
Διαβάστε περισσότεραGAUGE BLOCKS. Grade 0 Tolerance for the variation in length. Limit deviation of length. ± 0.25μm. 0.14μm ±0.80μm. ± 1.90μm. ± 0.40μm. ± 1.
GAUGE BLOCKS Accuracy according to ISO650 Nominal length (mm) Limit deviation of length Grade 0 Tolerance for the variation in length Grade Grade Grade Grade 2 Limit deviations of Tolerance for the Limit
Διαβάστε περισσότεραThick Film Array Chip Resistor
CN Series Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Reduction of assembly costs and
Διαβάστε περισσότεραPolymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
Διαβάστε περισσότεραSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Διαβάστε περισσότερα60W AC-DC High Reliability Slim Wall-mounted Adaptor. SGA60E series. File Name:SGA60E-SPEC
AC-DC High Reliability Slim Wall-mounted Adaptor SGA60E series Ⅵ Ⅴ Ⅱ Ⅱ { ψ. ψ File Name:SGA60E-SPEC 2015-09-15 AC-DC High Reliability Slim Wall-mounted Adaptor SGA60E series SPECIFICATION ORDER NO. SGA60E05-P1J
Διαβάστε περισσότεραThermistor (NTC /PTC)
ISO/TS16949 ISO 9001 ISO14001 2015 Thermistor (NTC /PTC) GNTC (Chip in Glass Thermistor) SMD NTC Thermistor SMD PTC Thermistor Radial type Thermistor Bare Chip Thermistor (Gold & silver Electrode) 9B-51L,
Διαβάστε περισσότεραLR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Διαβάστε περισσότεραNKT NTC Thermistor. Negative Temperature Coefficient Thermistor FEATURES
FEATURES Large, strong capacity of suppression of inrush current Big material (B value), small residual Small size, Long life, high reliability and fast response APPLICATIONS Switching -supply, switch,
Διαβάστε περισσότεραSMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)
Marking Outline: Low DCR, high rated current. Magnetic shielded structure Lead free product, RoHS compliant. RoHS Carrier tape packing, suitable for SMT process. SMT Widely used in buck converter, laptop,
Διαβάστε περισσότεραAΔ 1 ΑΝΑΓΛΥΦΟ ΔΡΥΣ EMBOSSED OAK AΔ 2. σελ.2 σελ.4
ΔΚ 1 σελ.3 AΔ 1 ΑΝΑΓΛΥΦΟ ΔΡΥΣ EMBOSSED OAK AΔ 2 ΑΝΑΓΛΥΦΟ ΔΡΥΣ EMBOSSED OAK σελ.2 σελ.4 ΔΡ 1 ΔΡΥΣ OAK ΟΚ 1 ΟΞΙΑ ΚΑΔΡΕΤΟ FRAMED BEECH σελ.3 σελ.5 ΑΔ 5 ΔΕΣΠΟΤΑΚΙ ΑΝΑΓΛΥΦΟ ΜΕ ΠΟΡΟ ASH ΛΑ 1 ΛΑΚΑ Φ1 LACQUER
Διαβάστε περισσότεραNTC Thermistor:SCK Series
Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:
Διαβάστε περισσότερα