Shenzhen Lys Technology Co., Ltd

Μέγεθος: px
Εμφάνιση ξεκινά από τη σελίδα:

Download "Shenzhen Lys Technology Co., Ltd"

Transcript

1 Carbide drawing dies Properties of grade Grade Density TRS Average Grain size Hardness (HRA) (g/cm3) (MPa) (ųm) YL YL YG YG6X YG YG YG Application recommended Grade YL01 YL10.2 YG6 YG6X YG8 YG11 YG15 Applications recommended Used for drawing diameter less than 1.5 mm of steel, tungsten and molybdenum wire under high speed drawing as well as nonferrous metals with high requirement on surface finish. Used for drawing diameter between 1.5 mm to 10mm of steel, tungsten and molybdenum wire under high speed drawing as well as nonferrous tubes with high requirement on surface finish. Used for drawing the diameter less than 20mm of steel, nonferrous metals and its alloy wire or bar under a moderate stress. It also used for tubes less than diameter of 10mm. Used for drawing the steel wire, nonferrous metals and its alloy wire or bar under the requirement of good wear resistant. Used for drawing diameter less than 50 mm of steel, nonferrous and its alloy wire or bar under a moderate stress. It also used for tubes under 35mm. Used for drawing diameter less than 60 mm of steel, nonferrous and its alloy wire or bar under a moderate stress. It also used for tubes under 35mm. Used for steel pipe and steel bar as well as alloy steel bolt and head forging of rivet under a certain big stress Types as following are: type 01, type 10, type 11, S11, type 12, type 13, S13,type 21, type 22, type 23, type 30, type 31, type 40, type41, type42, type60, R-2, R-4, R-5, R-6, R-7, R-8(9,10), type V, type W, Type W (ß), type WTA. Type 01 carbide drawing die nibs for drawing ferrous and non-ferrous metal wires Type D H Range of d h Type10 carbide drawing die nibs for drawing ferrous and non-ferrous metal wires 1

2 Type D H Range of d h Type 11 carbide drawing die nibs for drawing ferrous and non-ferrous metal wires Type D H Range of d h α Type S11 carbide drawing die nibs with large reducing angles for drawing ferrous metal wires. Type D H Range of d h α S

3 Type 12 carbide drawing die nibs for drawing non-ferrous metal wires and rods Type 13 carbide drawing die nibs for drawing non-ferrous metal rods Type S13 Carbide drawing dies nibs with large reducing angles for drawing ferrous and non-ferrous metal wires 3

4 S Type 21 Wall thickness reducing carbide die nibs for drawing metal tubes Type 22 Carbide drawing die nibs for drawing non-ferrous metal tubes

5 Type 23 Diameter and wall thickness reducing carbide die nibs for drawing metal tubes Type 30 Carbide floating plugs for drawing metal tubes Type D H d e , , , ,

6 Type 31 Carbide floating plugs for drawing metal tubes Type D H d Type 40 Carbide drawing nibs for drawing square metal bars. Type D H Range of A h α Type 41 Carbide drawing dies nibs for drawing rectangular non-ferrous metal bars. 6

7 Type D H Range of a Range of b h Type 42 Carbide drawing dies nibs for drawing non-ferrous metal strips. Type D H Range of a Range of b h Type 60 Carbide drawing dies nibs for drawing hexagonal ferrous metal bars Type D H Range of S h α

8 Note: Dimensions for h, h1, h2 and (a, b) are to be agreed upon by the seller and the buyer Type R -2 R-2-d Type R -4 R4-d R4-d Type R -5 R-5 -d

9 Type R R-6 -d Type R -7 R-7 -d Type R -8 (9, 10) Type V R-8 -d R-9 -d R-10 -d

10 V Type W W102-d W103-d W104-d W105-d W106-d W107-d W108-d W109-d W110-d W111-d W112-d Type W (ß) 10

11 W107-d-Dß W108-d-Dß W109-d-Dß W110-d-Dß W111-d-Dß Type WTA Type A B C D E F G R WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA *

12 WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * WTA * All dimensions in (mm) Note: We also produce special carbide drawing die s upon the drawings. 12

Pipe E235N (St 37.4 NBK) phosphated and oiled

Pipe E235N (St 37.4 NBK) phosphated and oiled Pipe E235N (St 37.4 NBK) phosphated and oiled Working Pressure Burst Pressure 4X1ST37.4NBK* 4 x 1.0 3201041000 397 459 555 2600 0.07 6X1ST37.4NBK 6 x 1.0 3201061000 252 289 394 1560 0.12 6X1.5ST37.4NBK

Διαβάστε περισσότερα

NKT NTC Thermistor. Negative Temperature Coefficient Thermistor FEATURES

NKT NTC Thermistor. Negative Temperature Coefficient Thermistor FEATURES FEATURES Large, strong capacity of suppression of inrush current Big material (B value), small residual Small size, Long life, high reliability and fast response APPLICATIONS Switching -supply, switch,

Διαβάστε περισσότερα

Strain gauge and rosettes

Strain gauge and rosettes Strain gauge and rosettes Introduction A strain gauge is a device which is used to measure strain (deformation) on an object subjected to forces. Strain can be measured using various types of devices classified

Διαβάστε περισσότερα

ZLW Series. Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD

ZLW Series. Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD ZLW Series Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD 1 Application Apply as the transportation of liquids in the fields of air condition, heating, sanitary water, water treatment cooling,

Διαβάστε περισσότερα

NMBTC.COM /

NMBTC.COM / Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration

Διαβάστε περισσότερα

0.635mm Pitch Board to Board Docking Connector. Lead-Free Compliance

0.635mm Pitch Board to Board Docking Connector. Lead-Free Compliance .635mm Pitch Board to Board Docking Connector Lead-Free Compliance MINIDOCK SERIES MINIDOCK SERIES Features Specifications Application.635mm Pitch Connector protected by Diecasted Zinc Alloy Metal Shell

Διαβάστε περισσότερα

COMADEX. PCBN - PCD inserts

COMADEX. PCBN - PCD inserts PCBN - PCD inserts 03/2011 P CCMT EW CCMW EW CNMN DCMW EW Page 1 Page 1 Page 2 Page 2 C RNGN Solid RNGN FullFace RCGX FullFace SNGN Solid B Page 3 Page 3 Page 3 Page 4 SNMN SCMW EW TCMW EW TPGN EW N Page

Διαβάστε περισσότερα

Aluminum Electrolytic Capacitors (Large Can Type)

Aluminum Electrolytic Capacitors (Large Can Type) Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction

Διαβάστε περισσότερα

Chapter 7 Transformations of Stress and Strain

Chapter 7 Transformations of Stress and Strain Chapter 7 Transformations of Stress and Strain INTRODUCTION Transformation of Plane Stress Mohr s Circle for Plane Stress Application of Mohr s Circle to 3D Analsis 90 60 60 0 0 50 90 Introduction 7-1

Διαβάστε περισσότερα

GAUGE BLOCKS. Grade 0 Tolerance for the variation in length. Limit deviation of length. ± 0.25μm. 0.14μm ±0.80μm. ± 1.90μm. ± 0.40μm. ± 1.

GAUGE BLOCKS. Grade 0 Tolerance for the variation in length. Limit deviation of length. ± 0.25μm. 0.14μm ±0.80μm. ± 1.90μm. ± 0.40μm. ± 1. GAUGE BLOCKS Accuracy according to ISO650 Nominal length (mm) Limit deviation of length Grade 0 Tolerance for the variation in length Grade Grade Grade Grade 2 Limit deviations of Tolerance for the Limit

Διαβάστε περισσότερα

Multilayer Ceramic Chip Capacitors

Multilayer Ceramic Chip Capacitors FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM

Διαβάστε περισσότερα

Multilayer Ceramic Chip Capacitors

Multilayer Ceramic Chip Capacitors FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient

Διαβάστε περισσότερα

Aluminum Electrolytic Capacitors

Aluminum Electrolytic Capacitors Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47

Διαβάστε περισσότερα

Ceramic PTC Thermistor Overload Protection

Ceramic PTC Thermistor Overload Protection FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over

Διαβάστε περισσότερα

(Mechanical Properties)

(Mechanical Properties) 109101 Engineering Materials (Mechanical Properties-I) 1 (Mechanical Properties) Sheet Metal Drawing / (- Deformation) () 3 Force -Elastic deformation -Plastic deformation -Fracture Fracture 4 Mode of

Διαβάστε περισσότερα

SC Style Optical Connector

SC Style Optical Connector SC Style Optical Connector OUTLINE SC connector is a push/pull style connector developed by NTT. The square, snap-in connector latches with a simple push-pull motion and is keyed. It is frequently used

Διαβάστε περισσότερα

2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%

2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20% Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite

Διαβάστε περισσότερα

PRB. Development of a New Bending Method PRB for High Strength Steel Tube and Application of High Strength Steel Tubes for Automotive Parts

PRB. Development of a New Bending Method PRB for High Strength Steel Tube and Application of High Strength Steel Tubes for Automotive Parts JFE No. 17 2007 8 p. 52 58 PRB Development of a New Bending Method PRB for High Strength Steel Tube and Application of High Strength Steel Tubes for Automotive Parts SUZUKI Koji TOYODA Shunsuke SATO Akio

Διαβάστε περισσότερα

Heat exchanger. Type WT. For the reheating of airflows in rectangular ducting PD WT 1. 03/2017 DE/en

Heat exchanger. Type WT. For the reheating of airflows in rectangular ducting PD WT 1. 03/2017 DE/en X X testregistrierung Heat exchanger Type For the reheating of airflows in rectangular ducting Rectangular hot water heat exchanger for the reheating of airflows, suitable for VAV terminal units Type TVR,

Διαβάστε περισσότερα

RJJ Miniature Aluminum Electrolytic Capacitors RJJ. Series RJJ High-Frequency, Low Impedance, Standard Type. Radial Type

RJJ Miniature Aluminum Electrolytic Capacitors RJJ. Series RJJ High-Frequency, Low Impedance, Standard Type. Radial Type 352 Elna Corrections 80-95 /6/98 :55 AM Page Miniature Aluminum Electrolytic Capacitors Series High-Frequency, Low Impedance, Standard Type For high reliability applications, Environmentally safe. High-frequency,

Διαβάστε περισσότερα

Available Specification & Size of CSAC Aluminium Products

Available Specification & Size of CSAC Aluminium Products Available Specification & Size of CSAC Aluminium Products 1. Casting Ware Application Specification Alloy Temper or sand mode, shell mode & metal mode. JIS H5202 AC2A, AC2B, AC3A, AC4B, AC4C, AC7A, AC7B,

Διαβάστε περισσότερα

ΙΑΤΡΙΚΟΣ ΕΞΟΠΛΙΣΜΟΣ ΑΝΑΛΩΣΙΜΑ ΕΞΕΤΑΣΤΙΚΟΙ ΦΑΚΟΙ & ΦΩΤΙΣΜΟΣ

ΙΑΤΡΙΚΟΣ ΕΞΟΠΛΙΣΜΟΣ ΑΝΑΛΩΣΙΜΑ ΕΞΕΤΑΣΤΙΚΟΙ ΦΑΚΟΙ & ΦΩΤΙΣΜΟΣ ΙΑΤΡΙΚΟΣ ΕΞΟΠΛΙΣΜΟΣ ΑΝΑΛΩΣΙΜΑ ΕΞΕΤΑΣΤΙΚΟΙ ΦΑΚΟΙ & ΦΩΤΙΣΜΟΣ ZOOM Modern LE Ds lamp of cold light with a 5X magni - fication. The intensity of light can be adjusted. Its articulated arm eases the movement

Διαβάστε περισσότερα

Υδρορροή που εγγυάται. Guaranteed Gutter protection

Υδρορροή που εγγυάται. Guaranteed Gutter protection Υδρορροή που εγγυάται Το πιο διαδεδομένο σύστημα υδρορροής αλουμινίου στην Ελληνική αγορά φέρει το σήμα ΥΔΡΟΡΡΟΗ με την μεγαλύτερη γκάμα εξαρτημάτων και με μεγάλη ποικιλία χρωμάτων καλύπτοντας όλες τις

Διαβάστε περισσότερα

FEATURES APPLICATION PRODUCT T IDENTIFICATION PRODUCT T DIMENSION MAG.LAYERS

FEATURES APPLICATION PRODUCT T IDENTIFICATION PRODUCT T DIMENSION MAG.LAYERS FEATURES RoHS compliant. Super low resistance, ultra high current rating. High performance (I sat) realized by metal dust core. Frequency Range: up to 1MHz. APPLICATION PDA, notebook, desktop, and server

Διαβάστε περισσότερα

Ceramic PTC Thermistor Overload Protection

Ceramic PTC Thermistor Overload Protection FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over

Διαβάστε περισσότερα

SMD Power Inductor-VLH

SMD Power Inductor-VLH SMD Power Inductor-VH Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 321618C 3.2±0.3 1.6±0.2

Διαβάστε περισσότερα

SMD Transient Voltage Suppressors

SMD Transient Voltage Suppressors SMD Transient Suppressors Feature Full range from 0 to 22 series. form 4 to 60V RMS ; 5.5 to 85Vdc High surge current ability Bidirectional clamping, high energy Fast response time

Διαβάστε περισσότερα

ST5224: Advanced Statistical Theory II

ST5224: Advanced Statistical Theory II ST5224: Advanced Statistical Theory II 2014/2015: Semester II Tutorial 7 1. Let X be a sample from a population P and consider testing hypotheses H 0 : P = P 0 versus H 1 : P = P 1, where P j is a known

Διαβάστε περισσότερα

ΣΩΛΗΝΕΣ ΕΥΘΕΙΑΣ ΡΑΦΗΣ LONGITUDINALLY WELDED STEEL PIPES

ΣΩΛΗΝΕΣ ΕΥΘΕΙΑΣ ΡΑΦΗΣ LONGITUDINALLY WELDED STEEL PIPES Βιομηχανικός Όμιλος Επεξεργασίας & Εμπορίας Χάλυβα (ΒΟΕΕΧ) Industrial Steel Processing & Trading Group (ISPTG) ΣΩΛΗΝΕΣ ΕΥΘΕΙΑΣ ΡΑΦΗΣ LONGITUDINALLY WELDED STEEL PIPES EXT DIAMETER INCHES ΕΞΩΤ ΔΙΑΜΕΤΡΟΣ

Διαβάστε περισσότερα

CMPTER SMA CONNECTORS. ... A Vital Part of Connection World

CMPTER SMA CONNECTORS. ... A Vital Part of Connection World ... A Vital Part of Connection World Receptacles With Accepts Pin Receptacles Metal Through The Wall Receptacles Insulator Through The wall Receptacles Air ine Through The wall Receptacles With Tap Receptacles

Διαβάστε περισσότερα

UDZ Swirl diffuser. Product facts. Quick-selection. Swirl diffuser UDZ. Product code example:

UDZ Swirl diffuser. Product facts. Quick-selection. Swirl diffuser UDZ. Product code example: UDZ Swirl diffuser Swirl diffuser UDZ, which is intended for installation in a ventilation duct, can be used in premises with a large volume, for example factory premises, storage areas, superstores, halls,

Διαβάστε περισσότερα

High pressure centrifugal pumps

High pressure centrifugal pumps High pressure centrifugal pumps Wilo-Multivert MVI (North America) Series description H [ft] 3 1 MVI 1 1 1 MVI 1 MVI 3 MVI MVI 1 1 Q [m³/h] Wilo-Multivert-MVI Hz - North America Q [US gpm] H [m] 1 1 1

Διαβάστε περισσότερα

SMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008

SMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008 SMD Wire Wound Ferrite Chip Inductors - LS Series LS Series LS Series is the newest in open type ferrite wire wound chip inductors. The wire wound ferrite construction supports higher SRF, lower DCR and

Διαβάστε περισσότερα

4 Way Reversing Valve

4 Way Reversing Valve STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and

Διαβάστε περισσότερα

IABPF/ABPF. Indexable Ball End Mills for High-Precision Finishing SHANK STYLE MODULAR STYLE FEATURES

IABPF/ABPF. Indexable Ball End Mills for High-Precision Finishing SHANK STYLE MODULAR STYLE FEATURES Indexable Ball End Mills for High-Precision Finishing SHANK STYLE MODULA STYLE FEATUES ATH Coated Inserts are ideal for high-speed and high-efficiency machining of hardened steels ACS Coated Inserts are

Διαβάστε περισσότερα

SMD Power Inductor-VLH

SMD Power Inductor-VLH SMD Power Inductor-VH PAD AYOUT Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252510 2.5±0.2

Διαβάστε περισσότερα

Metglas. High Performance Square Loop Cores Technical Bulletin. Low saturated permeability

Metglas. High Performance Square Loop Cores Technical Bulletin.  Low saturated permeability manufactured with cobalt-based METGLAS amorphous alloy 2714A allow the design of mag amps that can operate at higher frequencies than previously possible. Their combination of magnetic properties enable

Διαβάστε περισσότερα

Ημικυκλικές υδρορροές που ξεχωρίζουν. Half round gutters that distinguish

Ημικυκλικές υδρορροές που ξεχωρίζουν. Half round gutters that distinguish Ημικυκλικές υδρορροές που ξεχωρίζουν Πρόκειται για υδρορροή με μοναδικό ημικυκλικό σχήμα, δίνοντας στο χώρο σας άριστη λειτουργικότητα και ξεχωριστή αισθητική, είναι διαθέσιμη σε μεγάλη ποικιλία χρωμάτων

Διαβάστε περισσότερα

COMADEX. PCBN - PCD inserts

COMADEX. PCBN - PCD inserts PCBN - PCD inserts 03/2015 P CCMT EW CCMW EW CNMN DCMW EW Page 1 Page 1 Page 2 Page 2 C RNGN Solid RNGN FullFace RCGX FullFace RCGX Solid B Page 3 Page 3 Page 3 Page 4 SNGN Solid SNMN SCMW EW TCMW EW N

Διαβάστε περισσότερα

SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)

SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES) SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES) (8) 95-8365 venkel.com Features: RoHS Compliant and Halogen Free Good Q values High SRF range: 1nH to 47uH Tolerance: ±.2nH, ±.3nH, ±2%, ±5%, ±1% High

Διαβάστε περισσότερα

Lowara SPECIFICATIONS

Lowara SPECIFICATIONS SH Series Centrifugal pumps entirely made of AISI 36 stainless steel according to EN 733 (ex DIN 24255). Designed to pump hot, cold and moderately aggressive liquids. Available versions: SHE Close-coupled

Διαβάστε περισσότερα

SMD Power chokes- SPD Series SPD series chokes For High Current Use

SMD Power chokes- SPD Series SPD series chokes For High Current Use SMD Power chokes- SPD Series SPD series chokes For High Current Use Features 1.Shielded construction. 2.High current rating up to DC Amp 3.High frequency range up to 5.MHz 4.Ultra low buzz noise, due to

Διαβάστε περισσότερα

MS SERIES MS DESK TOP ENCLOSURE APPLICATION EXAMPLE FEATURE. Measuring instruments. Power supply equipments

MS SERIES MS DESK TOP ENCLOSURE APPLICATION EXAMPLE FEATURE. Measuring instruments. Power supply equipments MS SERIES MS DESK TOP ENCLOSURE FEATURE Available in 176 sizes. Screws are not appeared on the surface. Usable as rack mount case with optinal mounting bracket. There are no ventilation hole for cover

Διαβάστε περισσότερα

4. Construction. 5. Dimensions Unit mm

4. Construction. 5. Dimensions Unit mm 1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin

Διαβάστε περισσότερα

2010 ASEC INDUSTRIES PTE LTD

2010 ASEC INDUSTRIES PTE LTD 2010 ASECINDUSTRIESPTELTD No.1UpperAljuniedLink, #0802,JooSengWarehouseBlockA,Singapore367901 TEL:(65)63834368/62842051 FAX:(65)63834369 Email:shirleytan@asec.com.sg Email:sales@asec.com.sg Website:www.asec.com.sg

Διαβάστε περισσότερα

[1] P Q. Fig. 3.1

[1] P Q. Fig. 3.1 1 (a) Define resistance....... [1] (b) The smallest conductor within a computer processing chip can be represented as a rectangular block that is one atom high, four atoms wide and twenty atoms long. One

Διαβάστε περισσότερα

RSX Series. Radius Cutter for Machining of Stainless Steel and Exotic Material. Non-ferrous Metal. High Performance Milling Systems.

RSX Series. Radius Cutter for Machining of Stainless Steel and Exotic Material. Non-ferrous Metal. High Performance Milling Systems. High Performance illing Systems RSX Series Radius Cutter for achining of Stainless Steel and Exotic aterial. Non-ferrous etal Stainless Steel Exotic aterial RSX Features & Benefits Wide application range

Διαβάστε περισσότερα

Applications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage

Applications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter

Διαβάστε περισσότερα

LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)

LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF) Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature

Διαβάστε περισσότερα

Grey Cast Irons. Technical Data

Grey Cast Irons. Technical Data Grey Cast Irons Standard Material designation Grey Cast Irons BS EN 1561 EN-GJL-200 EN-GJL-250 EN-GJL-300 EN-GJL-350-1997 (EN-JL1030) (EN-JL1040) (EN-JL1050) (EN-JL1060) Characteristic SI unit Tensile

Διαβάστε περισσότερα

FERRITES FERRITES' NOTES RAW MATERIAL SPECIFICATION (RMS)

FERRITES FERRITES' NOTES RAW MATERIAL SPECIFICATION (RMS) FERRITES' NOTES RW MTERIL SPEIFITION (RMS) Property Unit Pratical Frequency Range MHz Initial Permeability urie Temperature Specific Gravity g/cm 3 Loss Factor @ FREQUENY -6 MHz Temp. oef. of Initial Permeability

Διαβάστε περισσότερα

the smartest energy Floor standing DHW (Domestic Hot Water) storage tanks for Forced Circulation Solar systems

the smartest energy Floor standing DHW (Domestic Hot Water) storage tanks for Forced Circulation Solar systems the smartest energy Floor standing DHW (Domestic Hot Water) storage tanks for Forced Circulation olar systems www.thermicsol.com 15 Floor standing single coil DHW storage tanks Material: teel sheet EN-10130

Διαβάστε περισσότερα

Lowara APPLICATIONS MATERIALS. General Catalogue

Lowara APPLICATIONS MATERIALS. General Catalogue FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron and impeller in AISI 36* stainless steel, designed to pump hot, cold and moderately

Διαβάστε περισσότερα

πόρτες κατοικιών residential doors

πόρτες κατοικιών residential doors πόρτες κατοικιών residential doors Για τις κατοικίες προσφέρουμε ιδανικές λύσεις για μοντέρνα ή κλασική διακόσμηση, με πόρτες και αξεσουάρ, προσαρμοσμένα στην αισθητική του χώρου σας. Διατίθενται σε μεγάλη

Διαβάστε περισσότερα

SMD Shielded Power Inductors SPIA Series. SPIA Series. Product Identification

SMD Shielded Power Inductors SPIA Series. SPIA Series. Product Identification SPIA Series SPIA series is an automatic assembly constructed power inductor which is shielded with ferrite core. It is ideal for portable device DC-DC converter line. Features RoHS Compliant Miniature

Διαβάστε περισσότερα

4 Way Reversing Valve

4 Way Reversing Valve STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and

Διαβάστε περισσότερα

FLAME RETARDANT POWER CABLE. 0.6/1kV SPYC, SPYCY, FA-SPYC, FA-SPYCY 0.6/1kV SPYCB, SPYCBY, FA-SPYCB, FA-SPYCBY. Application Standard

FLAME RETARDANT POWER CABLE. 0.6/1kV SPYC, SPYCY, FA-SPYC, FA-SPYCY 0.6/1kV SPYCB, SPYCBY, FA-SPYCB, FA-SPYCBY. Application Standard FLAME RETARDANT POWER CABLE Cable Designation 0.6/1kV SPYC, SPYCY, FA-SPYC, FA-SPYCY 0.6/1kV SPYCB, SPYCBY, FA-SPYCB, FA-SPYCBY Application Standard 0.6 / 1kV SPYCBY - Design guide : JIS C 3410(2010) -

Διαβάστε περισσότερα

MIL-C-5015 Connector Series

MIL-C-5015 Connector Series ircular onnector --5015 onnector eries K15-228- type connector K15-228- series circular connectors are used extensively in line connections between electrical equipment,various instruments and meters.

Διαβάστε περισσότερα

COMPOSITE INSULATOR. ANSI Standard Type COMPOSITE LONGE ROD SUSPENSION INSULATOR. PDI 16mm Diameter Rod Deadend Insulators

COMPOSITE INSULATOR. ANSI Standard Type COMPOSITE LONGE ROD SUSPENSION INSULATOR. PDI 16mm Diameter Rod Deadend Insulators COMPOSITE LONGE ROD SUSPENSION INSULATOR PDI 16mm Diameter Rod Deadend Insulators Mechanical Characteristics Item of Length Diameter Net Wt. Torsion SML RTL Proof Cat. Sheds (kg) (N-m) (kn) (kn) (kn) 1

Διαβάστε περισσότερα

ΑΝΑΚΟΙΝΩΣΗ 558 STRIPER ΣΑΦΗΝΕΚΤΟΜΗΣ (ΚΙΡΣΩΝ) ΑΠΟΣΤΕΙΡΩΜΕΝΟ Μ. Χ. ΚΑΘΕΤΗΡΑΣ ΦΛΕΒΙΚΗΣ ΠΑΡΑΚΕΝΤΗΣΗΣ 1099 (ΠΕΤΑΛΟΥΔΕΣ) Μ. Χ. ΑΠΟΣΤΕΙΡΩΜΕΝΕΣ 19 G

ΑΝΑΚΟΙΝΩΣΗ 558 STRIPER ΣΑΦΗΝΕΚΤΟΜΗΣ (ΚΙΡΣΩΝ) ΑΠΟΣΤΕΙΡΩΜΕΝΟ Μ. Χ. ΚΑΘΕΤΗΡΑΣ ΦΛΕΒΙΚΗΣ ΠΑΡΑΚΕΝΤΗΣΗΣ 1099 (ΠΕΤΑΛΟΥΔΕΣ) Μ. Χ. ΑΠΟΣΤΕΙΡΩΜΕΝΕΣ 19 G ΕΛΛΗΝΙΚΗ ΔΗΜΟΚΡΑΤΙΑ 3 η ΥΓΕΙΟΝΟΜΙΚΗ ΠΕΡΙΦΕΡΕΙΑ ΜΑΚΕΔΟΝΙΑΣ ΓΕΝΙΚΟ ΝΟΣΟΚΟΜΕΙΟ ΦΛΩΡΙΝΑΣ ΔΙΕΥΘΥΝΣΗ ΕΓΝΑΤΙΑΣ 9 ΤΚ. 53100 ΤΗΛ. 23853/50266 ΦΑΧ 23850/22175 ΑΝΑΚΟΙΝΩΣΗ ΦΛΩΡΙΝΑ 14.12.2015 Αριθμ.

Διαβάστε περισσότερα

ω ω ω ω ω ω+2 ω ω+2 + ω ω ω ω+2 + ω ω+1 ω ω+2 2 ω ω ω ω ω ω ω ω+1 ω ω2 ω ω2 + ω ω ω2 + ω ω ω ω2 + ω ω+1 ω ω2 + ω ω+1 + ω ω ω ω2 + ω

ω ω ω ω ω ω+2 ω ω+2 + ω ω ω ω+2 + ω ω+1 ω ω+2 2 ω ω ω ω ω ω ω ω+1 ω ω2 ω ω2 + ω ω ω2 + ω ω ω ω2 + ω ω+1 ω ω2 + ω ω+1 + ω ω ω ω2 + ω 0 1 2 3 4 5 6 ω ω + 1 ω + 2 ω + 3 ω + 4 ω2 ω2 + 1 ω2 + 2 ω2 + 3 ω3 ω3 + 1 ω3 + 2 ω4 ω4 + 1 ω5 ω 2 ω 2 + 1 ω 2 + 2 ω 2 + ω ω 2 + ω + 1 ω 2 + ω2 ω 2 2 ω 2 2 + 1 ω 2 2 + ω ω 2 3 ω 3 ω 3 + 1 ω 3 + ω ω 3 +

Διαβάστε περισσότερα

Capacitors - Capacitance, Charge and Potential Difference

Capacitors - Capacitance, Charge and Potential Difference Capacitors - Capacitance, Charge and Potential Difference Capacitors store electric charge. This ability to store electric charge is known as capacitance. A simple capacitor consists of 2 parallel metal

Διαβάστε περισσότερα

FLAME-X 950 (N)HXCH FE180/E90 0,6/1kV DIN VDE 0266, DIN

FLAME-X 950 (N)HXCH FE180/E90 0,6/1kV DIN VDE 0266, DIN Halogen- free low smoke fire resistant security power cables with copper concentric conductor CONSTRUCTION Conductors: bare copper conductor, circular solid class 1 (RE) or stranded circular or circular

Διαβάστε περισσότερα

Instruction Execution Times

Instruction Execution Times 1 C Execution Times InThisAppendix... Introduction DL330 Execution Times DL330P Execution Times DL340 Execution Times C-2 Execution Times Introduction Data Registers This appendix contains several tables

Διαβάστε περισσότερα

Τα συστήµατα EUROPA 500. σχεδιάστηκαν για να. δηµιουργούν ανοιγόµενα. κουφώµατα. τέλειας λειτουργικότητας, µε υψηλή αισθητική. και άψογο φινίρισµα.

Τα συστήµατα EUROPA 500. σχεδιάστηκαν για να. δηµιουργούν ανοιγόµενα. κουφώµατα. τέλειας λειτουργικότητας, µε υψηλή αισθητική. και άψογο φινίρισµα. Τα συστήµατα EUROPA 500 σχεδιάστηκαν για να δηµιουργούν ανοιγόµενα κουφώµατα τέλειας λειτουργικότητας, µε υψηλή αισθητική και άψογο φινίρισµα. EUROPA 500 systems are designed in order to create opening

Διαβάστε περισσότερα

SPM R2 M P S A

SPM R2 M P S A Wire Wound s (SPM/SAM/SPS/SPH/SPN Series) Ordering Code Product Code: SPM: Molding Inductor-General SAM: Molding Inductor-Automotive SPM 2520 2R2 M P S A SPS : Metal Coating (Ultra high Current) SPN :

Διαβάστε περισσότερα

Sunlord. Wire Wound SMD Power Inductors SWCS Series SWCS XXXX -XXX T. Operating Temperature: -25 ~ +105 FEATURES APPLICATIONS PRODUCT IDENTIFICATION

Sunlord. Wire Wound SMD Power Inductors SWCS Series SWCS XXXX -XXX T. Operating Temperature: -25 ~ +105 FEATURES APPLICATIONS PRODUCT IDENTIFICATION Wire Wound SMD Power Inductors SWCS Series Operating Temperature: -25 ~ +105 FEATURES Various high power inductors are superior to be high saturation Suitable for surface mounting equipment APPLICATIONS

Διαβάστε περισσότερα

MULTILAYER CHIP VARISTOR JMV S & E Series: (SMD Surge Protection)

MULTILAYER CHIP VARISTOR JMV S & E Series: (SMD Surge Protection) INTRODUCTION Metal Oxide based chip varistors (JMVs) are used for transient suppression. JMVs have non-linear - behavior, which is similar to that of Zener Diode. Each grain in JMV exhibits small p-n junction

Διαβάστε περισσότερα

ΑΡΙΣΤΟΤΕΛΕΙΟ ΠΑΝΕΠΙΣΤΗΜΙΟ ΘΕΣΣΑΛΟΝΙΚΗΣ ΤΜΗΜΑ ΟΔΟΝΤΙΑΤΡΙΚΗΣ ΕΡΓΑΣΤΗΡΙΟ ΟΔΟΝΤΙΚΗΣ ΚΑΙ ΑΝΩΤΕΡΑΣ ΠΡΟΣΘΕΤΙΚΗΣ

ΑΡΙΣΤΟΤΕΛΕΙΟ ΠΑΝΕΠΙΣΤΗΜΙΟ ΘΕΣΣΑΛΟΝΙΚΗΣ ΤΜΗΜΑ ΟΔΟΝΤΙΑΤΡΙΚΗΣ ΕΡΓΑΣΤΗΡΙΟ ΟΔΟΝΤΙΚΗΣ ΚΑΙ ΑΝΩΤΕΡΑΣ ΠΡΟΣΘΕΤΙΚΗΣ ΑΡΙΣΤΟΤΕΛΕΙΟ ΠΑΝΕΠΙΣΤΗΜΙΟ ΘΕΣΣΑΛΟΝΙΚΗΣ ΤΜΗΜΑ ΟΔΟΝΤΙΑΤΡΙΚΗΣ ΕΡΓΑΣΤΗΡΙΟ ΟΔΟΝΤΙΚΗΣ ΚΑΙ ΑΝΩΤΕΡΑΣ ΠΡΟΣΘΕΤΙΚΗΣ ΣΥΓΚΡΙΤΙΚΗ ΜΕΛΕΤΗ ΤΗΣ ΣΥΓΚΡΑΤΗΤΙΚΗΣ ΙΚΑΝΟΤΗΤΑΣ ΟΡΙΣΜΕΝΩΝ ΠΡΟΚΑΤΑΣΚΕΥΑΣΜΕΝΩΝ ΣΥΝΔΕΣΜΩΝ ΑΚΡΙΒΕΙΑΣ

Διαβάστε περισσότερα

STAINLESS STEEL WIRE &BAR

STAINLESS STEEL WIRE &BAR STAINLESS STEEL WIRE &BAR History 12345678 Superb Quality Diverse Products Quick Delivery Competitive Price COLD HEADING SeAH Metal Co,. Ltd. is endeavoring to develop better cold heading quality of stainless

Διαβάστε περισσότερα

CMPTER 2.92MM CONNECTORS. ... A Vital Part of Connection World. Receptacles With Accepts Pin Receptacles, Metal Through The Wall

CMPTER 2.92MM CONNECTORS. ... A Vital Part of Connection World. Receptacles With Accepts Pin Receptacles, Metal Through The Wall ... A Vital Part of Connection World Receptacles With Accepts Pin Receptacles, Metal Through The Wall Receptacles, Insulator Through The Wall Receptacles, Air ine Through The Wall PCB Connectors 2.92MM

Διαβάστε περισσότερα

Bulletin 1489 UL489 Circuit Breakers

Bulletin 1489 UL489 Circuit Breakers Bulletin 489 UL489 Circuit Breakers Tech Data 489-A Standard AC Circuit Breaker 489-D DC Circuit Breaker 489-A, AC Circuit Breakers 489-D, DC Circuit Breakers Bulletin 489-A Industrial Circuit Breaker

Διαβάστε περισσότερα

FDL - FXDL FBDL SERIES

FDL - FXDL FBDL SERIES FDL - FXDL FBDL SERIES SUBMERSIBLE PUMPS FOR WITH ENTRAINED SOLIDS WASTE WATER Sewage pumps with power up to 22 kw (30 HP). Available in cast iron (FDL), AISI 316 stainless steel (FXDL), B10 bronze (FBDL).

Διαβάστε περισσότερα

Cal-Chip Electronics, Incorporated Multilayer Chip Inductors For High Frequency

Cal-Chip Electronics, Incorporated Multilayer Chip Inductors For High Frequency Cal-Chip Electronics, Incorporated Multilayer Chip Inductors For High GHF SERIES FEATURES Multilayer inductor made of advanced ceramics with low-resistivity silver used as internal conductors provides

Διαβάστε περισσότερα

k A = [k, k]( )[a 1, a 2 ] = [ka 1,ka 2 ] 4For the division of two intervals of confidence in R +

k A = [k, k]( )[a 1, a 2 ] = [ka 1,ka 2 ] 4For the division of two intervals of confidence in R + Chapter 3. Fuzzy Arithmetic 3- Fuzzy arithmetic: ~Addition(+) and subtraction (-): Let A = [a and B = [b, b in R If x [a and y [b, b than x+y [a +b +b Symbolically,we write A(+)B = [a (+)[b, b = [a +b

Διαβάστε περισσότερα

Applications Water distribution

Applications Water distribution 1 FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron designed to pump clean, chemically non-aggressive water and liquids. Available versions:

Διαβάστε περισσότερα

Configurations: Dimension (mm) B (max) A (max) 0.20 IWCCG1005. Inductance Range IWCCG ~ IWCCG ~ 1000 IWCCG

Configurations: Dimension (mm) B (max) A (max) 0.20 IWCCG1005. Inductance Range IWCCG ~ IWCCG ~ 1000 IWCCG Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones

Διαβάστε περισσότερα

DATA SHEET Surface mount NTC thermistors. BCcomponents

DATA SHEET Surface mount NTC thermistors. BCcomponents DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped

Διαβάστε περισσότερα

IWCSeries FEATURES APPLICATION ORDERING CODE TRIGON COMPONENTS. Configurations: Dimension (mm) IWC C G 1608 K 22N T (1) (2) (3) (4) (5) (6) (7)

IWCSeries FEATURES APPLICATION ORDERING CODE TRIGON COMPONENTS. Configurations: Dimension (mm) IWC C G 1608 K 22N T (1) (2) (3) (4) (5) (6) (7) Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones

Διαβάστε περισσότερα

Ordinal Arithmetic: Addition, Multiplication, Exponentiation and Limit

Ordinal Arithmetic: Addition, Multiplication, Exponentiation and Limit Ordinal Arithmetic: Addition, Multiplication, Exponentiation and Limit Ting Zhang Stanford May 11, 2001 Stanford, 5/11/2001 1 Outline Ordinal Classification Ordinal Addition Ordinal Multiplication Ordinal

Διαβάστε περισσότερα

RDN-250i Application / Benefits Model No. Servo Motor Maker SPECIFICATIONS Table Dia. Horizontal [kg] Center Height Resister Dia.

RDN-250i Application / Benefits Model No. Servo Motor Maker SPECIFICATIONS Table Dia. Horizontal [kg] Center Height Resister Dia. RDN-250i Zero Backlash High-Definition Split System with ROLLER CAM DRIVE Zero Backlash with ROLLER CAM DRIVE Table Dia. 232 Center Height 210 105 Spindle Through Hole Dia. 70 Pneumatic Allowable Work

Διαβάστε περισσότερα

Group 30. Contents.

Group 30. Contents. Group 30 Contents Pump type Page Pump type Page Pump type Page 30A(C)...X002H 4 30A(C)...X013H 5 30A(C)...X068H 6 30A(C)...X068HU 7 30A(C)...X136H 8 30A(C)...X136Y 9 30A(C)...X146H 10 30A(C)...X160H 11

Διαβάστε περισσότερα

Series of Wafer Check Valves Design:API 594, API 6D

Series of Wafer Check Valves Design:API 594, API 6D Wafer Check Valves Series of Wafer Check Valves Design:API 594, API 6D Dual-Plate Wafer Check Valve : Type:C1 Dual-Plate Wafer Check Valve for by-pass Type:C2 Dual-Plate Double-Flanged Check Valve : Type:C3

Διαβάστε περισσότερα

Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of

Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features

Διαβάστε περισσότερα

1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC

1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical

Διαβάστε περισσότερα

Metal Oxide Leaded Film Resistor

Metal Oxide Leaded Film Resistor Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for

Διαβάστε περισσότερα

Accu-Guard II. SMD Thin-Film Fuse ELECTRICAL SPECIFICATIONS

Accu-Guard II. SMD Thin-Film Fuse ELECTRICAL SPECIFICATIONS Accu-Guard II is a version of Accu-Guard fuses for a wider range of current and voltage ratings. Con struct ed on alumina substrates, Accu-Guard II fuses display superior electrical, mechanical and en

Διαβάστε περισσότερα

Model VRT Miniature Type (Tapped Base Type)

Model VRT Miniature Type (Tapped Base Type) odel VRT iniature Type (Tapped Base Type) F n F A H m φ D1 B B1 S1 1 F1 T1 f1 n1 F1 T 1 n f1 1 ain dimensions Table surface dimensions odel No. aximum stroke idth Heiht enth ass Table mountin tap position

Διαβάστε περισσότερα

NTC Thermistor:TSM type

NTC Thermistor:TSM type Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended

Διαβάστε περισσότερα

Metal Oxide Leaded Film Resistor

Metal Oxide Leaded Film Resistor SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled

Διαβάστε περισσότερα

Summary of Specifications

Summary of Specifications Snap Mount Large High CV High Ripple 85 C Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life for the series is 2,000 hours

Διαβάστε περισσότερα

Groove Milling High Precision Tools for Groove Milling

Groove Milling High Precision Tools for Groove Milling Groove Milling High Precision Tools for Groove Milling METRIC Groove Milling High Precision Tools for Groove Milling See it in action GM Solid Solid Carbide Groove Milling tools, for miniature and small

Διαβάστε περισσότερα

PRODUCT IDENTIFICATION SWPA 3012 S 1R0 N T

PRODUCT IDENTIFICATION SWPA 3012 S 1R0 N T Wire Wound SMD Power Inductors SWPA Series Operating temperature range: -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded conruction reduces buzz noise to ultra-low levels Metallization

Διαβάστε περισσότερα

MECHANICAL PROPERTIES OF MATERIALS

MECHANICAL PROPERTIES OF MATERIALS MECHANICAL PROPERTIES OF MATERIALS! Simple Tension Test! The Stress-Strain Diagram! Stress-Strain Behavior of Ductile and Brittle Materials! Hooke s Law! Strain Energy! Poisson s Ratio! The Shear Stress-Strain

Διαβάστε περισσότερα

Other Test Constructions: Likelihood Ratio & Bayes Tests

Other Test Constructions: Likelihood Ratio & Bayes Tests Other Test Constructions: Likelihood Ratio & Bayes Tests Side-Note: So far we have seen a few approaches for creating tests such as Neyman-Pearson Lemma ( most powerful tests of H 0 : θ = θ 0 vs H 1 :

Διαβάστε περισσότερα

High Speed, Low Loss Multi-layer Materials

High Speed, Low Loss Multi-layer Materials Data Sheet High Speed, Low Loss Multilayer Materials Laminate R5725 Prepreg R5620 UL/ANSI IPC4101 Slash Sheet FR4 Primary:/91 Secondary:/102(*) Jul. 2013 No.13070132 No.; 130701321 Property Units Test

Διαβάστε περισσότερα

ΧΑΛΥΒΔΟΣΩΛΗΝΕΣ ΕΛΙΚΟΕΙΔΟΥΣ ΡΑΦΗΣ SPIRALLY WELDED STEEL PIPES

ΧΑΛΥΒΔΟΣΩΛΗΝΕΣ ΕΛΙΚΟΕΙΔΟΥΣ ΡΑΦΗΣ SPIRALLY WELDED STEEL PIPES Βιομηχανικός Όμιλος Επεξεργασίας & Εμπορίας Χάλυβα (ΒΟΕΕΧ) Industrial Steel Processing & Trading Group (ISPTG) ΧΑΛΥΒΔΟΣΩΛΗΝΕΣ ΕΛΙΚΟΕΙΔΟΥΣ ΡΑΦΗΣ SPIRALLY WELDED STEEL PIPES EXT DIAMETER INCHES ΕΞΩΤ ΔΙΑΜΕΤΡΟΣ

Διαβάστε περισσότερα

Appendix A3. Table A3.1. General linear model results for RMSE under the unconditional model. Source DF SS Mean Square

Appendix A3. Table A3.1. General linear model results for RMSE under the unconditional model. Source DF SS Mean Square Appendix A3 Table A3.1. General linear model results for RMSE under the unconditional model. Source DF SS F Value Pr > F Model 107 374.68 3.50 8573.07

Διαβάστε περισσότερα

XKT. Metal Oxide Varistor FEATURES

XKT. Metal Oxide Varistor FEATURES FEATURES Operating Temperature Range: -40 ~+105 Body Diameters Range From 5D to 20D Wide Operating from 18V to 1800V Full compliance with RoSH and REH DIMENSION L:16mm min SIZE D MAX H MAX d+-0.05 E c

Διαβάστε περισσότερα

Statistical Inference I Locally most powerful tests

Statistical Inference I Locally most powerful tests Statistical Inference I Locally most powerful tests Shirsendu Mukherjee Department of Statistics, Asutosh College, Kolkata, India. shirsendu st@yahoo.co.in So far we have treated the testing of one-sided

Διαβάστε περισσότερα