|
|
|
- Ζηναις Παπανδρέου
- 6 χρόνια πριν
- Προβολές:
Transcript
1 istributed by: The content and copyrights of the attached material are the property of its owner.
2 resistors RK73 general purpose 2%, 5% tolerance thick film chip resistor U features RuO 2 thick film resistor element nti-leaching nickel barrier terminations Meets or exceeds I 575, IJ R 2690, I PP-100, MIL-R-55342F Marking: hite three-digit on black protective coat No marking on 1F, 1H and 1 sizes Products with lead-free terminations meet U RoHS requirements. Pb located in glass material, electrode and resistor element is exempt per nnex 1, exemption 5 of U directive 2005/95/ dimensions and construction t d c Protective oating eramic Substrate L Resistive Film ordering Inner lectrode c Solder Plating Ni Plating N imensions inches (mm) (Inch ode) L c d t 1F (01005) 1H (0201) 1 (0402) 1J (0603) 2 (0805) 2 (1206) 2 (1210) 2H (2010) 3 (2512).015±.001 (0.4±0.02).024±.001 (0.6±0.03) ( ).063±.008 (1.6±0.2).079±.008 (2.0±0.2).126±.008 (3.2±0.2).197±.008 (5.0±0.2).248±.008 (6.3±0.2).007±.001 (0.2±0.02).012±.001 (0.3±0.03).02±.002 (0.5±0.05).031±.004 (0.8±0.1).049±.004 (1.25±0.1).063±.008 (1.6±0.2).102±.008 (2.6±0.2).098±.008 (2.5±0.2).122±.008 (3.1±0.2).004±.001 (0.10±0.03).004±.002 (0.1±0.05).008±.004 (0.2±0.1).012±.004 (0.3±0.1).016±.008 (0.4±0.2).02±.012 (0.5±0.3).004±.001 (0.11±0.03).006±.002 (0.15±0.05) ( ) ±.004 (0.3±0.1) ( ) ( ) ±.001 (0.13±0.02).009±.001 (0.23±0.03).014±.002 (0.35±0.05).018±.004 (0.45±0.1).02±.004 (0.5±0.1).024±.004 (0.6±0.1) New Part # RK73 2 T T 102 J For further on packaging, please refer to ppendix. 8 1F 1H 1 1J H 3 Termination Material T: Sn (1F, 1H, 1, 1J, 2, 2, 2, 2H, 3) L: SnPb (1, 1J, 2, 2, 2, 2H,3) (Other termination styles may be available, please contact factory for options) Packaging T: 7" 2mm pitch pressed paper (01005 only) T: 7" 2mm pitch punched pressed paper (0201 only) T: 10" 2mm pitch punched pressed paper (0201 only) TP: 7" 2mm pitch punched paper (0402 & 0603) T: 7" paper tape (0603, 0805, 1206 &1210) T: 10" paper tape (0603, 0805, 1206 &1210) T: 7" punched plastic (0805, 1206, 1210, 2010 & 2512) T: 10" punched plastic (0805, 1206, 1210, 2010 & 2512) Nominal Resistance 2 significant figures + 1 multiplier R indicates decimal on value <10Ω Tolerance G: ±2% J: ±5% Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/17/07 KO Speer lectronics, Inc. olivar rive P.O. ox 547 radford, P US Fax:
3 N applications and ratings Part esignation* RK731F (01005) RK731H (0201) RK731 (0402) RK731J (0603) RK732 (0805) RK732 (1206) RK732 (1210) RK732H (2010) RK733 (2512) Power 70 1/32 (.03) 1/20 (.05) 1/16 (.063) 1/10 (.10) 1/8 (.125) 1/4 (.25) 1/2 (.50) 1/3 (.33) 1/2 (.50) 1/3 (.33) 3/4 (.75) 1 T..R. (ppm/ ) Max. Resistance Range -24** (G±2%) RK73 general purpose 2%, 5% tolerance thick film chip resistor Resistance Range -24** (J±5%) ± KΩ - 1MΩ 6.8KΩ - 1MΩ ±300 10Ω - 6.2K 10Ω - 6.2K ±200 10Ω - 10MΩ 10Ω - 10MΩ ±400 1Ω - 9.1Ω ±200 10Ω - 1MΩ 1Ω - 10MΩ ±200 10Ω - 10MΩ 1Ω - 10MΩ ±400 1Ω - 9.1Ω 11MΩ - 22MΩ ±200 10Ω - 1MΩ 1Ω - 1MΩ ±400 1Ω - 9.1Ω 1.1MΩ - 10MΩ 1.1MΩ - 22MΩ ±200 10Ω - 5.6MΩ 1Ω - 5.6MΩ ±400 1Ω - 9.1Ω 6.2MΩ - 10MΩ 6.2MΩ - 22MΩ ±200 10Ω - 1KΩ 1Ω - 1KΩ 1.1KΩ - 5.6MΩ 1.1KΩ - 5.6MΩ ± MΩ - 10MΩ ±200 ±400 ±200 ±400 10Ω - 5.6MΩ 10Ω - 5.6MΩ 1Ω - 5.6MΩ 6.2MΩ - 22MΩ 1Ω - 5.6MΩ 6.2MΩ - 22MΩ bsolute Maximum orking Voltage 15V 25V 50V 150V 200V 200V (500V****) bsolute Maximum Overload Voltage 30V 50V 100V 300V 400V 400V (500V****) Operating Temperature Range*** -55 to to +155 resistors * Parenthesis indicate I package size codes. ** See ppendix for available decade values. *** IJ, 2, 2 sizes available -55 to +175 (contact factory). **** Please contact KO Speer for the Max. working voltage and the Max. overload voltage. environmental applications erating urve 100 Surface Temperature Rise F, 1H 1, 1J, 2, 2, 2, 2H, mbient Temperature ( ) Temperature Rise ( ) H J 1 1H 1F % Rated Power For complete environmental specifications, please refer to pages Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/17/07 KO Speer lectronics, Inc. olivar rive P.O. ox 547 radford, P US Fax:
4 ppendix packaging - surface mount components omponent (mm) L T arrier Tape Quantity/ (Pieces) Taping (mm) P1 T1 RK73 RK73H RK73-RT RK73G RK73 RK73Z SG73 RK73N SR73 RF73 UR73 RN73 LT73 HV73 RN73H SG73P SG73S SG73-RT 1F T ± ± ±0.2 2± / H T ± ± ±0.2 2± / TP ± ± ±0.2 2± / TP ± ± ±0.2 2± / J T ± ± ± ± / T ± ± ± ± / TP ± ± ±0.2 2± / T ± ± ± ± / T ± ± ± ± ± T ± ± ± ± / T ± ± ± ± ± T ±0.2 2± ± ± / T ± ± ± ± ± T ± ± ± ± / T ± ± ± ± ± T ± ± ± ± / T ± ± ± ± ± T ± ± ± ± / T ± ± ± ± ± H T ± ± ± ± ± T ± ± ± ± ± T ± ± ± ± ± T ± ± ± ± ± H T ± ± ± ±0.1 1± K73 2J T ± ± ± ±0.1 1± T ± ± ± ±0.1 1± T ± ± ± ±0.1 1± N 1J T ± ± ± ± / T ± ± ± ±0.1 1± N 25Z T ± ± ± ±0.1 1± Z T ± ± ± ±0.1 1± ulk ase (RK73 1, 1J, 2, 2) Packaging esignation: K Packaging specifications Style 1 1J Slider Shutter Packaging Quantity 50,000 pieces/case 25,000 pieces/case 10,000 pieces/case 5,000 pieces/case T1 P1 (TP) arrier Tape P ±0.1 irection of feed (Notes) otted lines are applicable to only TP and T. øa (Notes) holes, shapes and design are examples entral hole ø13 e ød (mm) e (mm) ll 21 2 RU, RT, RS, R 27 3 Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 2/27/08 KO Speer lectronics, Inc. olivar rive P.O. ox 547 radford, P US Fax: ±0.1 T1 T1 (mm) ød 285
5 ppendix packaging - surface mount components omponent (mm) L T arrier Tape Quantity/ (Pieces) Taping (mm) P1 T1 N N_ N_K/N NZ NN R41 RN41 RM41 MLT NT73 L73 LT73 PT72 1F8 3.8± ± ±0.1 TP ± ± ± ± ± K TP ± ± ± ± ± /14K TP ± ± ± ± ± J2/1J2K /-0 T ± ± ± ± / /-0/ /-0 T ± ± ± ± /-0/ 255 T ± ± ± ± /-0/ 178 1J4/1J4K / /-0/ T ± ± ± ± / J T ± ± ± ± ± T ± ± ± ± ± T ± ± ± ±0.1 1± T ± ± ± ±0.1 1± T ± ± ± ±0.1 1± T ± ± ± ±0.1 1± T ± ± ±0.1 1± T ± ± ±0.1 1± T ± ± ± ±0.1 1± T ± ± ± ±0.1 1± T ± ± ± ±0.1 1± T ± ± ± ±0.1 1± T ± ± ±0.1 1± T ± ± ±0.1 1± T ± ± ± ± ± T ± ± ± ± ± T ± ± ± ± ± T ± ± ± ± ± T ± ± ± ± ± , 2H, T ± ± ± ± ± S T ± ± ± ± ± TP ± ± ± ± / J T ± ± ± ± / T ± ± ± ± / T ±0.2 2± ± ± / T ± ± ± ± ± T ± ± ± ± ± ST73H ST73V T ± ± ± ± / J T ± ± ± ± ± LP T ± ± ± ± ± T ± ± ± ± ± RU T ± ± ± ± ± T ± ± ± ± ± RT T ± ±0.1/ 8.0± ± ± T ± ±0.1/ 8.0± ± ± RS T ± ± ± ± ± T ± ± ± ± ± R T ±0.1/ 1.95±0.1/ ± ± ± KL T ± ± ± ± ± H T ± ± / TP ± ± ± ± ± KL73 1J T ± ± ± ± ± T ± ± ± ± ± T ± ± ± ± ± T ± ± ± ± ± KQ T ± ± ± ± ± KQ T ± ± ± ± ± KQT T ± ± ± ± ± T ± ± ± ±0.2 5± T ± ± ± ± ± LP 9040N T 500 Ø9.4±0.2 16±.01 12± ± T ±0.2 13±0.2 24±.01 16± ± T ± ±0.2 24±.01 16± ± T ± SR T T Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 2/27/ KO Speer lectronics, Inc. olivar rive P.O. ox 547 radford, P US Fax:
6 ppendix packaging - surface mount components omponent (mm) L T arrier Tape Quantity/ (Pieces) Taping (mm) P1 T1 SL T ± ± ± ± ± / T ± ± ± ± SLN T ± ± ±0.1 12± ± , T ± ± ± ± ± TLR 2, 2N T ± ± ± ± / H T ± ± ± ± ± PS I T ± ± ± T ± ± ± TSL T ± ± ± ± ± NPR T ± ± ± ± T ±0.1 9± ± SR T ± ± ± ± ± ± ±0.2 T ± ± ± ± ± ± ±0.1 TP ± ± ± ± ± Z 1J 1.6± ± ±0.15 T ± ± ± ± ± ZP T 2000/4000* 2 2.0± ± ±0.2 ML T 3000* 2.4± ± ± ± ± ± ± ±0.25 T ± ± ± ± ± MHL 1 1.0± ± ±0.1 TP ± ± ± ± ± J 1.6± ± ±0.15 T ± ± ± ± ± M ± ± ±0.1 T ± ± ± ± ± J4 3.2± ± ±0.1 T ± ± ± ± ± ± ± ±0.2 T ± ± ± ± max. 178 KGM ± ± ±0.2 T ± ± ± ± max ± ± ±0.2 T ± ± ± ± max ± ± ±0.2 T ± ± ± ± max. 178 F 1J 3.2± ± ±0.2 T ± ± ± ± ± H TM ± ± ± ± max ± ± ±0.15 TP ± ± ± ± J 1.6± ± ±0.15 T ± ± ± ± max. 180 NV ± ± max. T ± ± ± ± max. 180 NV73L 2 3.2± ± max. T ± ± ± ± max max. T ± ± ± ± max J max. T ± ± ± ± max L max. T ± ± ± ± max ± T ± ± ± ± ± LR72 10± T ± ± ± ± ± ± ± ±0.4 T ± ±0.1 24± ± ± ± ± ±0.1 T ± ± ± ± ± ± ± ±0.1 T ± ± ± ± ± ± ± ±0.2 T ± ± ± ± or 0.95± HF 0.80 or ± ± ±0.25 T ± ± ± ± or 1.20± ± ± ±0.2 T ± ± ± ± ± J 1.6± ± ±0.2 T ± ± ± ± ± K 2F 2.0± ± ±0.2 T ± ± ± ±0.1 N/ ± ± ±0.2 T ± ± ± ± ± ± ± ±0.3 T ± ± ± ± ± KR ± ± ±0.2 T ± ± ± ± max. 178 TF T ± ± ± ± / T ± ± ± ± ± P T ± ± ± ± ± T ± ± ± ± ± F 1N,1F T ± ± ± ± ± R 1J10 3.2± ± ± ± ± ± ± / T ± ± ± ± ± ± ± ± MRGF T ± ± ± PG T ± ± ± ± ± J T ± ± ± ± ± PG T ± ± ± ± ± R T ± ± ± ± ± S T ± ± ± ± ± PL T ± ± ± ± ± T ± ± ± ± ± SF T ± ± ± * ML2: 0.047µH ~ 2.2µH = T: 4,000 pcs/reel; 2.7µH ~ 10µH = T: 3,000 pcs/reel Z2: <2200Ω=T:4,000; 2200Ω=T: 2,000 pcs/reel Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 2/27/08 KO Speer lectronics, Inc. olivar rive P.O. ox 547 radford, P US Fax:
7 ppendix packaging - surface mount components omponent (mm) L T arrier Tape Quantity/ (Pieces) Taping (mm) P1 T1 (X) (X) P(X) TX N N(X) (X) (X) R(X) R(X) RT(X) TF(X) US(X) T T ± ± ± T T ± ± ± T T ± ± ± Q T ± ± ± Q T ± ± ± Q T ± ± ± Q T ± ± ± N T ± ± ± N T ± ± ± N T ± ± ± T ± ± ± T ± ± ± S T ± ± ± S T ± ± ± S T ± ± ± S T ± ± ± Packaging specifications arrier Tape entral hole (mm) 1.75±0.1 øa ø13 e ød T1 P1 (TP) P ±0.1 irection of feed (Notes) otted lines are applicable to only TP and T. T1 T1 (Notes) holes, shapes and design are examples ød (mm) e (mm) ll 21 2 RU, RT, RS, R 27 3 Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 2/27/ KO Speer lectronics, Inc. olivar rive P.O. ox 547 radford, P US Fax:
8 ppendix marking and standard values marking KS Part esignation ody olor Marking Marking 1F (01005) lack None None 1H (0201) lack None None 1 (0402) lack None None 1J (0603) lack hite 3 igits RK73 2 (0805) lack hite 3 igits 2 (1206) lack hite 3 igits 2 (1210) lack hite 3 igits 2H (2010) lack hite 3 igits 3 (2512) lack hite 3 igits 1H (0201) Green None None 1 (0402) Green None None 1J (0603) lack hite 0 RK73Z 2 (0805) lack hite (1206) lack hite (1210) lack hite 000 2H (2010) lack hite (2512) lack hite 000 1H (0201) lack None None 1 (0402) lue None None 1J (0603) lue lack igits, -96 None RK73H 2 (0805) lue lack 4 igits 2 (1206) lue lack 4 igits 2 (1210) lue lack 4 igits 2H (2010) lue lack 4 igits 3 (2512) lue lack 4 igits 1H (0201) lack None None 1 (0402) lack None None RK73G 1J (0603) ark lue lack igits -96 None 2 (0805) ark lue lack 4 igits 2 (1206) ark lue lack 4 igits 1J (0603) lack Light lue 3 igits RK73 2 (0805) lack Light lue 3 igits 2 (1206) lack Light lue 3 igits 1 (0402) lack None None 1J (0603) lack None None 2 (0805) lack None None RK73N 2 (1206) lack None None 2 (1210) lack None None 2H (2010) lack None None 3 (2512) lack None None 1 (0402) lack None None 1J (0603) Green istinctive digits olors -96 None istinctive 2 (0805) Green RN73 olors 4 igits 2 (1206) Green istinctive olors 4 igits 2H (2010) Green istinctive olors 4 igits RN73H/ istinctive lack RN73S olors 4 igits HV73 lack hite 3 igits KS Part esignation ody olor Marking Marking K73 lack hite 3 igits () 1 Indigo None None 1J Indigo hite 4 igits UR73 () 3 Indigo hite 4 igits () 2 Indigo hite 4 igits () 2 Indigo hite 4 igits () 2H Indigo hite 4 igits SG73 Red ine hite 3 igits SG73P Green hite 3 igits N lack hite 3 igits N_ lack hite 3 igits 1F, 1H lack None None N_K 1 lack None None 1J lack hite 3 igits N lack hite 3 igits + pin number N lack hite 3 igits NZ lack None None NN Green hite 2 igits 1 (0402) Indigo None None 1J (0603) Indigo hite 1%=4 igits 2%, 5%=3 igits 2 (0805) Indigo hite 1%=4 igits 2%, 5%=3 igits SR73 2 (1206) Indigo hite 1%=4 igits 2%, 5%=3 igits 2 (1210) Indigo hite 1%=4 igits 2%, 5%=3 igits 2H (2010) Indigo hite 1%=4 igits 2%, 5%=3 igits 3 (2512) Indigo hite 1%=4 igits 2%, 5%=3 igits SL1-3 lack hite 4 igits TSL lack hite 4 igits TLR lack hite 4 igits LR72 Silver None 3 igits NPR lack Teal 1%=4 igits 5%, 10%=3 igits SR lack hite 3 igits R41 Ivory 3 color band None RN41 lue 3 color band None RM41 Green 3 color band None MLT Gray 3 color band None rown None None PN Gray None None RK lack hite 1%=4 igits 2%, 5%=3 igits RKH lack hite 1%=4 igits 2%, 5%=3 igits RKL lack hite 1%=4 igits 2%, 5%=3 igits MRP lack hite lphanumeric MRS lack hite lphanumeric LT73 ronze lack 4 igits L73 Orange lack 3 igits NT 1J Pink 2, 2 Pink lack 3 igits Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/16/07 KO Speer lectronics, Inc. olivar rive P.O. ox 547 radford, P US Fax:
9 ppendix marking and standard values marking (continued) KS Part esignation ody olor Marking Marking 70 lack None None PT72 80 rown None None 100 lue None None RF73 rown lack 3 igits P lack Yellow 2 igits F hite lack lphanumeric TF lack hite Letter esignation NV73 lack None None NV73 lack None None NV73 lack None None NV Green lack lphanumeric 1H (0201) Green hite irection Only 1 (0402) ark lue Yellow irection Only KL73 1J (0602) ark lue Yellow 2 (0805) ark lue Yellow lphanumeric 2 (1206) ark lue Yellow 0604 lack lack 3 igits SR 0805 lack lack 3 igits 1006 lack lack 3 igits ML lack None None MHL 1 rown None None 1J hite lack Stripe None KL32 lack hite 3 igits 0603 lack hite 3 igits KQ 0805 lack hite 3 igits 1008 lack hite 3 igits KQ(T) 0402 hite None None KQ 0402/0403 hite None None 0603 lack None None LP73 lack hite lphanumeric PL lack hite 3 igits SS lack lack 3 igits MRGF lack hite lphanumeric R lack hite lphanumeric PG lack lack Letter esignation LP lack None None HF rown None None M Tan None None Z/ZP lack None None KGM lack None None KR lack None None 2 hite/lack None None K 1J, 2F rown/lack None None 2 hite/lack lack 2 igit R 1J Green Yellow 3 igit 2 Green Yellow 3 igit F lack None None SF 45 Green hite K + Value significant figures of nominal resistance -12 ecade Values ecade Values ecade Values ecade Values Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 2/27/ KO Speer lectronics, Inc. olivar rive P.O. ox 547 radford, P US Fax:
10 ppendix pad dimensions standard soldering pad dimensions Flat omponents LP 9040N The optimum soldering pad dimensions may differ depending on soldering conditions, however, the following land dimensions are generally recommended. 2H 2.5 X K73 2J 3.1 X X RK73 1F 0.4 X SG73 RN73 1H 0.6 X RN73H X SR73 LT73 1J 1.6 X NT73 PT X L X RF73 KL X HV73 2H 5.0 X LP73 ST X SL/TSL X X SLN X NPR P F X X X x N 6.0 X F 6.0 X X X LP 9040N 9.0 X X X KL X KQT X X KQ X KQ X Z X ZP 1J 0.80 X MHL X ML X X SR X TF Style imensions millimeters omponent X X X Style Soldering Pad hip omponent imensions millimeters omponent 2N, X H(1mΩ) 5.0 X H (2mΩ~6mΩ) 5.0 X H (7mΩ~8mΩ) 5.0 X (1mΩ) 6.35 X TLR 3(2mΩ) 6.35 X (3mΩ) 6.35 X (4mΩ) 6.35 X (1mΩ~4mΩ) 6.35 X (5mΩ~8mΩ) 6.35 X (9mΩ-10mΩ) 6.35 X UR X X X J 1.6 X X X UR73 2H (10m~30mΩ) 5.0 X H (33m~100mΩ) 5.0 X (10m~30mΩ) 6.4 X (33m~100mΩ) 6.4 X Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 2/28/08 KO Speer lectronics, Inc. olivar rive P.O. ox 547 radford, P US Fax:
11 ppendix pad dimensions standard soldering pad dimensions (continued) The optimum soldering pad dimensions may differ depending on soldering conditions, however, the following land dimensions are generally recommended. Flat omponents Style imensions millimeters omponent 1H 0.6 X X J 1.6 X NV X NV73L X X Soldering Pad 2J 4.5 X hip omponent 2L 5.7 X PL X X X X SLF X SS X X X X PG X J PS I 10.0 X X SLF SR current sense resistor SR L imensions inches (mm) L F G F G SR (10.0) (6.0) (1.0) (2.0) (5.0) (1.6) (3.0) (2.0) (1.0) SR (12.0) (8.0) (1.6) (3.2) (6.0) (2.2) (5.3) (2.3) (1.15) Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 2/28/ KO Speer lectronics, Inc. olivar rive P.O. ox 547 radford, P US Fax:
12 ppendix pad dimensions resistor arrays N Style omponent L imensions 12K 0.5 X n K F8K J/K 0.8 X n N J 0.8 X n X n J10K N NN Style omponent imensions F G N 1J10Y 3.2 X N 210Y 4.0 X N 25Z 3.2 X N 29Z 6.4 X hip Networks N25Z, N29Z F L Soldering Pad hip omponent N1J10Y, N210Y G O F thick film resistor MRGF omponent imensions MRGF X chip resistor array R F G imensions inches (mm) L F G L (unit: mm) ferrite bead array F hip omponent L imensions inches (mm) (3216) (3.2) (1.6) (0.762) (3.048) (0.406) (0.787) L Soldering Pad hip omponent Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 7/11/07 KO Speer lectronics, Inc. olivar rive P.O. ox 547 radford, P US Fax:
13 ppendix pad dimensions integrated passive devices SOI, TSSOP, QSOP & SOT23 hip imensions inches (mm) F N (2.4).098 (2.5).287 (7.3).150 (3.81) N (2.4).098 (2.5).287 (7.3).300 (7.62) N (2.4).098 (2.5).287 (7.3).350 (8.89) (2.4).272 (6.9).461 (11.7).350 (8.89) (2.4).272 (6.9).461 (11.7).450 (11.43) Q (0.3).025 (0.63).180 (4.56).280 (7.1).175 (4.45) Q (0.3) (0.63) (4.56) (7.1) (5.72) Q (0.3).025 (0.63).180 (4.56).280 (7.1).275 (6.99) Q (0.3).025 (0.63).180 (4.56).280 (7.1).325 (8.26) SOT (0.9).037 (0.95).055 (1.4).031 (0.8).141 (3.6) S (0.97).043 (1.1).055 (1.4).141 (3.6) S (0.97).043 (1.1).063 (1.6).141 (3.6).076 (1.9) S (1.4).031 (0.81).141 (3.6) SOI, TSSOP, QSOP F SOT23 capacitor arrays M hip imensions inches (mm).012 (0.31 ± 0.10).062 (1.59 ± 0.15).011 (0.28 ± 0.10).019 (0.50 ± 0.10) (0.89 ± 0.10) (0.76 ± 0.10) (2.54 ± 0.15) (0.45 ± 0.10) (0.80 ± 0.10) L Soldering Pad hip omponent melf type components R41, RN41, RM41, MLT, Style imensions millimeters omponent R X RN41 2, X RM41 MLT X ,2H X Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 8/02/ KO Speer lectronics, Inc. olivar rive P.O. ox 547 radford, P US Fax: Solder Pad dhesive rea
14 ppendix pad dimensions other chips RS, RT, RU, R imensions millimeters RS RT RU R ceramic chip capacitors omponent pads should be designed to achieve good solder filets and minimize component movement during reflow soldering. Pad dimensions are given below for multilayer ceramic capacitors for both reflow and wave soldering. The basis for these designs is: Pad width equal to component width. It is permissible to decrease this to as low as 85% of component width but it is not advisable to go below this. Pad overlap 0.5mm beneath component Pad extension 0.5mm beyond components for reflow and 1.0mm for wave soldering imensions inches (mm) ase (0.50) (1.70) (0.60) (0.50) (0.75) (2.30) (0.80) (0.70) (1.25) (3.00) (1.00) (1.00) (1.60) (4.00) (1.00) (2.00) (2.50) (4.00) (1.00) (2.00) ceramic chip capacitors HF G HF Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 2/20/06 KO Speer lectronics, Inc. olivar rive P.O. ox 547 radford, P US Fax: Part imensions inches (mm) G (0.40) (0.50) (0.80) (1.00) (1.00) (0.80) (1.00) (1.00) (1.00) (1.20) 309
15 ppendix pad dimensions three-terminal inductor/capacitor K hip Mounting Side 1J, 2F, 2 2 ack Side onnect to ground pattern of mounting side G F Resist hip 1J 2F 2 H Through Hole imensions inches (mm) F G H (0.6) (0.5) (1.0) (1.4) (1.2) (2.4) (0.4) (0.3) (0.6) (1.4) (1.8) (1.4) (2.8) (0.4) (0.3) (1.0) (1.4) (1.8) (2.8) (2.2) (4.0) (0.8) (0.5) Resist ø 0.3 Through Hole Ground Pattern three-terminal capacitor/resistor KR hip Mounting Side ø 0.5 Through Hole ack Side onnect to ground pattern of mounting side Ground Pattern Resist three-terminal capacitor KGM 0603 hip Mounting Side 0805 hip Mounting Side 1206 hip Mounting Side 1812 hip Mounting Side 0603, 0805, 1206, 1812 ack Side 0.6 Resist 0.6 Resist ø 0.5 Through Hole ø 0.5 Through Hole onnect to ground pattern of mounting side ø 0.3 Through Hole ø 0.3 Through Hole Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 3/02/ KO Speer lectronics, Inc. olivar rive P.O. ox 547 radford, P US Fax: Resist Ground Pattern (unit: mm)
istributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. resistors N concave termination with square corners resistor array U features
Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Operating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
THICK FILM CHIP RESISTOR" CAL-CHIP ELECTRONICS INC."
THICK FILM CHIP RESISTOR CAL-CHIP ELECTRONICS INC. CAL-CHIP SERIES: RM SERIES 1 2 3 INTRODUCTION SCOPE Applies to all sizes of rectangular-type fixed chip resistors with Ruthenium base as material. FEATURES
Thick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MW) THICK FILM ON ALUMINA SUSTRATE,
B37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Low Resistance Flat Chip Resistors Type SR73
Low Resistance Flat Chip Resistors Type SR73 1. Scope This specification applies to chip resistors (SR73) produced by KOA Corporation. AHA 11/11/01 CERTIFIED 2. Type Designation The type designation shall
RC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
Thick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MΩ) THICK FILM ON ALUMINA SUSTRATE,
Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
LR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
LR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
SMD - Resistors. Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612 official distributor of 1. Scope Thick Film Chip Resistor-SMDC Series -This specification applies
Thick Film Chip Resistors
FEATURES EIA STANDARD SIZING 01005(1/32), 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES
Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512 official distributor of Thick Film Chip Resistor-SMDC Series 1. Scope -This specification applies to all
Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Thick Film Array Chip Resistor
CN Series Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Reduction of assembly costs and
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. PRODUCT DETAIL Electrical Characteristics μh L (Min) Q MHz (Min) SRF Ω DCR IDC ma TEST FREQ: MHz TEST LEVEL: 100 mv Test Instruments HP4291
NPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
Thin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) RoHS Compliant includes all homogeneous
Carbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
LR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
THICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Metal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Current Sense Metal Strip Resistors (CSMS Series)
Features: Range: 1mΩ to 100mΩ Low TCR as low as 75PPM High power rating Custom Values available RoHS Compliant and Halogen Free Operating Temperature: -55 C to +170 C Part Number Structure CSMS 0805 -
Thin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) Type EI Size Power Rating at 70
NPIS Shielded Power Inductors
FEATURES SHIELDED POWER INDUCTOR ULTRA LOW PROFILE (1.0 ~ 4.5mm MAX. HEIGHT) SURFACE MOUNTABLE CONSTRUCTION INDUCTANCE VALUES UP TO 220µH TAPED AND REELED FOR AUTOMATIC INSERTION CHARACTERISTICS Case Size
Anti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
SMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
INPAQ Global RF/Component Solutions
MCB & MHC W Series Specification Product Name Series Multilayer Chip Ferrite Bead MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516 MCB and MHC Series Chip Ferrite Bead for Automotive Applications
Metal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Metal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:
![± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:](/thumbs/85/91419422.jpg "± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:")
TS-UP Series 85 C, 3000 hours Compact size for general purpose and industrial applications 2 and 3 pin versions available 20mm lengths for low profile applications RoHS Compliant Rated Working Voltage:
High Voltage Thick Film Chip Resistor
Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Highly reliable multilayer electrode construction -Higher component and
Trimmable Thick Film Chip Resistor
rimmable hick ilm Chip Resistor R Series rimmable hick ilm Chip Resistor Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. eatures
1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Current Sensing Metal Chip Resistor
eatures -SMD designed for automatic insertion -High power rating in small size -Low resistance resistor for current detection -Metal foil construction ensures high reliability and performance with very
Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. FEATURES The monolithic construction performs high reliability and ensures a closed magnetic flux in a component avoids magnetic and interference
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES) (8) 95-8365 venkel.com Features: RoHS Compliant and Halogen Free Good Q values High SRF range: 1nH to 47uH Tolerance: ±.2nH, ±.3nH, ±2%, ±5%, ±1% High
Metal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication
MCB and MHC Series Chip Ferrite Bead for Automotive Applications Qualified based on AEC-Q200
RoHS MC and MHC Series Chip Ferrite ead for Automotive Applications Qualified based on AEC-Q200 Explanation of Part Number MC 1608 W 12 1 H P - 1 2 3 4 5 6 7 8 9 1. Series Name 2. Size Code: the first
Current Sensing Chip Resistor
Features -3 atts power rating in 1 att size, 1225 package -Low CR of ±100 PPM/ C -Resistance values from 1m to 1 ohm -High purity alumina substrate for high power dissipation -Long side terminations with
Applications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
Aluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
High Current Chip Ferrite Bead MHC Series
High Current Chip Ferrite Bead MHC Series Features Combination of high frequency noise suppression with capability of handing high current. The current rating up to 6 Amps with low DC. Applications High
MAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat (Epoxy)
ARN series Thin Film High Precision Chip Resistor Features» Advanced thin film technology» Very tight tolerance down to ±0.01%» Extremely low TCR down to ±5ppm/» Wide resistance range 1ohm-3Mega ohm» Miniature
Multilayer Chip Capacitors C0G/NP0/CH
Multilayer Chip Capacitors C0G/NP0/CH Features Good thermal stability High insulation resistance Low dissipation factor Low inductance Applications Resonant circuits Filter circuits Timing elements Coupling
High Voltage Thick Film Chip Resistor. RCV Series. Features. Applications. Construction
High Voltage Thick Film Chip Resistor High Voltage Thick Film Chip Resistor Features Highly reliable multilayer electrode construction High component and equipment reliability Excellent performance at
Thick Film Chip Resistor
CR Series Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Highly reliable multilayer electrode
Data Sheet. Customer: Current Sensing Thick Film Chip Resistor - RS Series Size: 0402/0603/0805/1206/1210/2010/2512. Accepted by (QC) Approved by
Data Sheet Customer: Product: Current Sensing Thick Film Chip Resistor - RS Series Size: 0402/0603/0805/1206/1210/2010/2512 Issued Date: 01-Jun-10 Edition: REV.A5 Produced by Checked Approved by Prepared
+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
Metal Film Flame-Proof Resistors
Features -Low Noise -Low TCR from ±15~100PPM/ -High Precision from ±0.1%~1% -Complete Flameproof Construction UL-1412. -Coating meets UL94V-0 Applications -Telecommunication -Medical Equipment -Consumer
Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction
TS-HA/HB Series 105 C, 3000 hours Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature:
Thin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to ±5PPM/C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
Anti-Sulfurated Thick Film Chip Resistor
S Series Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Special construction to prevent sulfuration in a sulfur containing
No Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
PCB Footprint Library
PCB Tantalum Capacitors EIA Standard Low Inductance MLCs Chip Film Capacitors SuperCaps Filters TVS Diodes Couplers Crossovers Inductors Timing Devices Resistive Products http://www.avx.com Tantalum Capacitors
Aluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Data sheet Thin Film Chip Inductor AL Series
Data sheet Thin Film Chip Inductor AL Series Scope - 0201 and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and
Surface Mount Multilayer Inductor
FETURES 0603, 0805, 0806 ND 1008 CSE SIZES HIGH CURRENT ND LOW RESISTNCE NEW "S" VERSION FOR INCRESED STURTION CURRENT UGRDED "H" VERSION FOR HIGHEST CURRENT REFLOW SOLDERING LICBLE CKGE FOR UTOMTIC ICKLCE
DATA SHEET Surface mount NTC thermistors. BCcomponents
DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped
Polymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
Slim-Mox. Precision Thick Film Planar. High dielectric & low outgassing
Slim-Mox Radial Terminal Slim-Mox Precision Thick Film Planar pplications HV power supplies Medical instrumentation urrent pulse limiters Ionization chambers High dielectric & low outgassing epoxy coating
CSKA series. Current Sensing Chip Resistor Automotive. Features. Applications. Construction FAITHFUL LINK
CSKA series Current Sensing Chip Resistor Automotive Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate
Thin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to PPM/ C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
SPECIFICATION FOR APPROVAL
信昌電子陶瓷股份有限公司 Prosperity Dielectrics Co., Ltd. No. 148, Chang-An Road, Sec 1,Lu-Tsu Shiang, Taoyuan, Taiwan, ROC. Tel.:886-3-3224471 Fax:886-3-3212216 SPECIFICATION FOR APPROVAL DATE: CUSTOMER: LIMITED
YAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.
YAGEO CORPORATION SMD INDUCTOR / BEADS CLH Series Multilayer Chip Inductors High Frequency Lead-free / For High Frequency Applications APPLICATIONS RF Resonance and Impedance Matching Circuit RF and Wireless
SMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008
SMD Wire Wound Ferrite Chip Inductors - LS Series LS Series LS Series is the newest in open type ferrite wire wound chip inductors. The wire wound ferrite construction supports higher SRF, lower DCR and
Polymer PTC Resettable Fuse: KMC Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. IA size: 0603, 0805, 1206, 1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small
YJM-L Series Chip Varistor
Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
Thin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
Thin Film Chip Inductor
Scope -Calchip s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Calchip s design provides high, excellent Q, and superior temperature stability. This highly
Chip Ferrite Bead MCB-S/B Series
Chip Ferrite Bead MCB-S/B Series Features Monolithic inorganic material construction Closed magnetic circuit avoids crosstalk SMD Type & suitable for reflow and wave soldering Available in various sizes
APPLICATIONS TECHNOLOGY. Leaded Discs N.03 N.06 N.09
NC Disc hermistors ND 03/06/09 NE 03/06/09 NV 06/09 APPLICAIONS ND or NE: Commerical, Industrial and Automotive Applications AEC-Q200 Qualified NV: Professional Applicationsl Alarm and temperature measurement
NTC Thermistor:TSM type
Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended
Metal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
CASE DIMENSIONS: 1.27±0.13 (0.050±0.005) A 2.54 (0.100) 1.27 (0.050) 1.27 (0.050) 1.27±0.13 (0.050±0.005) B 3.81 (0.150) 1.27 (0.050) 1.27 (0.
MARKING (White marking on black body) Polarity Stripe (+) Code Rated Voltage The T4Z HRC4000 Medical Grade series is designed for use in non-critical medical applications. The T4Z product line is based
Thick Film Chip Resistor
CR Series Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Highly reliable multilayer electrode
Thin Film Precision Chip Resistor-AR Series
hin Film Precision Chip Resistor-AR Series Construction L D1 3 4 5 6 D2 9 8 7 1 2 1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat
Interference Suppression Capacitor
MOLDED BOX CONSTRUCTION, SUPPRESSION CAPACITOR, RADIAL LEAD FEATURES UL, CSA, VDE, CQC, CE, ENEC APPROVALS X2 SAFETY CAP CLASSIFICATION FOR USE IN ACROSS-THE-LINE APPLICATIONS METALLIZED POLYPROPYLENE
RS Series Current Sensing Thick Film Chip Resistor Current Sensing Thick Film Chip Resistor
Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. eatures -Low inductance -Highly reliable multilayer electrode construction -Higher
± 20% ± 5% ± 10% RENCO ELECTRONICS, INC.
RL15 RL16, RL17, RL18 MINIINDUCTORS CONFORMALLY COATED MARKING The nominal inductance is marked by a color code as listed in the table below. Color Black Brown Red Orange Yellow Green Blue Purple Grey
NTC thermistors for temperature measurement
NTC thermistors for temperature measurement SMD NTC thermistors with nickel barrier termination, case size 0603 Series/Type: Date: June 2008 EPCOS AG 2008. Reproduction, publication and dissemination of
Application. Features
Thick Film Chip Resistor TCR Series Application Entertainment: Stereo, TV tuners, Tape recorder Appliance: Air conditioner, Refrigerator Computer & relative products: Main board, PDA Communication equipment:
Thick Film Chip Resistor
Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Highly reliable multilayer electrode construction
Surface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
Standard Nominal Resistance Values:
Standard Nominal Resistance Values: The below chart shows the nominal resistance value for each series. The values in the chart have been in this order using the approximate values that are based on the
High Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
SPECIFICATION FOR APPROVAL
信昌電子陶瓷股份有限公司 Prosperity Dielectrics Co., Ltd. No. 148, Chang-An Road, Sec 1,Lu-Tsu Shiang, Taoyuan, Taiwan, ROC. Tel.:886-3-3224471 Fax:886-3-3212216 SPECIFICATION FOR APPROVAL DATE: CUSTOMER: LIMITED
Polymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
Polymer PTC Resettable Fuse: KRT Series
Polymer PT Resettable use: KRT Series Radial Lead Type or Telecom pplications eatures 1. RoHS & Halogen-ree (H) compliant 2. Hold current ratings from 0.08 to 0.18 3. High operating voltage rating :100Vdc/250Vdc