ALUMINUM ELECTROLYTIC CAPACITORS LKG
|
|
- Γολγοθά Καλάρης
- 6 χρόνια πριν
- Προβολές:
Transcript
1 Lug / Snap-in Terminal Type, For Audio Equipment Disigned for high grade audio equipment, giving priority to high fidelity sound quality. The variation expansion of the. TYPE-: The low profile high tone quality grade of the new development Super Through electrolyte adoption. TYPE-2: The center grade that the best sound is provided electrode foil, with the multiple use. High Grade TYPE-3: The highest tone quality grade by the low drag the gold plating terminal adoption. Gold Tune The sound quality that it meets the high tone quality needs for HD Audio equipment. Compliant to the RoHS directive (20/65/EU). Specifications Item Performance Characteristics Category Temperature Range 40 to +85 C Rated Voltage Range 6 to 00V (TYPE-, TYPE-2, TYPE-3) Rated Capacitance Range to 0µF Capacitance Tolerance ± 20% at 20Hz, 20 C Leakage Current After 5 minutes' application of rated voltage at 20 C, leakage current is not more than 3 CV (µa), [C :Rated Capacitance, V :Voltage (V)] Tangent of loss angle () See refer to next page (Measurement frequency : 20Hz at 20 C) Stability at Low Temperature Rated voltage(v) Z 25 C/Z+20 C Impedance ratio ZT/Z20(MAX.) Z 40 C/Z+20 C 6 to Measurement frequency : 20Hz Endurance The specifications listed at right shall be met when the capacitors are restored to 20 C after the rated voltage is applied for hours at 85 C. Capacitance change Leakage current Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Shelf Life Marking After storing the capacitors under no load at 85 C for hours and then performing voltage treatment based on JIS C 50-4 clause 4. at 20 C, they shall meet the specified values for the endurance characteristics listed above. Printed with gold color letter on black sleeve. Type numbering system (Snap-in terminal type) (Example : Gold Tune 25 V µf, Dia.φ30) L 2 K 3 G 4 5 E 6 6 Configuration Pb-free terminal Pb-free PET sleeve ES M (Snap-in terminal type) 0 E S 2 B 3 B 4 K Grade Configuration Capacitance tolerance (±20%) Rated capacitance(µf) Rated voltage(25v) Series name Type Grade TYPE-(Gold Tune) TYPE-2(Gold Tune) TYPE-3(Super Through) AK BK CK Case dia.code Type numbering system (Lug terminal type) (Example : Super Through 50 V µf) L 2 K 3 G 4 5 H M 0 K Z 2 S Grade Grade TYPE-(Gold Tune) TYPE-2(Gold Tune) TYPE-3(Super Through) Configuration 2 Capacitance tolerance(±20%) Rated capacitance(µf) Rated voltage(50v) Series name Type 6.3± F S 6.3± 0 (Lug terminal type) Configuration φ 35 to φ 40 φ 50 to φ 76 P ± ±2 Dimension table in next page. 357
2 Dimensions (Snap-in Terminal Type : Grade TYPE-) V(C) C472MESZAK C562MESYAK C682MESAAK C822MESYAK C822MESZAK C03MESYAK C03MESZAK C03MESAAK C03MESBAK C23MESYAK C23MESZAK C23MESAAK C23MESCAK C53MESYAK C53MESZAK C53MESAAK C53MESBAK C83MESZAK C83MESAAK C83MESBAK C223MESAAK C223MESBAK C223MESCAK C273MESAAK C273MESBAK C273MESCAK C333MESBAK C333MESCAK V(E) E332MESZAK E392MESYAK E392MESAAK E472MESYAK E472MESZAK E562MESBAK E682MESYAK E682MESZAK E682MESAAK E822MESYAK E822MESZAK E822MESAAK E822MESCAK E03MESYAK E03MESZAK E03MESAAK E03MESBAK E23MESZAK E23MESAAK E23MESBAK E23MESCAK E53MESAAK E53MESBAK E83MESAAK E83MESBAK E83MESCAK E223MESBAK E223MESCAK E273MESCAK E333MESCAK V(V) V222MESZAK V272MESYAK V272MESAAK V332MESYAK V332MESZAK V392MESBAK V472MESYAK V472MESZAK V472MESAAK V562MESYAK V562MESZAK V562MESAAK V562MESCAK V682MESYAK V682MESZAK V682MESBAK V822MESZAK V822MESAAK V822MESBAK V03MESAAK V03MESBAK V03MESCAK V23MESAAK V23MESBAK V23MESCAK V53MESBAK V53MESCAK V83MESBAK V83MESCAK V223MESCAK V(H) current at 85 C 20Hz H52MESZAK H82MESYAK H82MESAAK H222MESYAK H222MESZAK H272MESYAK H272MESZAK H272MESAAK H272MESBAK H332MESYAK H332MESZAK H392MESYAK H392MESZAK H392MESAAK H392MESBAK H392MESCAK H472MESYAK H472MESZAK H472MESAAK H562MESZAK H562MESAAK H562MESBAK H562MESCAK H682MESAAK H682MESBAK H822MESBAK H822MESCAK H03MESBAK H03MESCAK H23MESCAK H53MESCAK
3 Dimensions (Snap-in Terminal Type : Grade TYPE-) 0 63V(J) J82MESZAK J02MESYAK J22MESAAK J52MESYAK J52MESZAK J82MESYAK J82MESZAK J82MESAAK J82MESBAK J222MESYAK J222MESZAK J222MESAAK J222MESCAK J272MESYAK J272MESZAK J272MESAAK J272MESBAK J332MESZAK J332MESAAK J332MESBAK J392MESAAK J392MESBAK J392MESCAK J472MESAAK J472MESBAK J472MESCAK J562MESBAK J562MESCAK J682MESBAK J682MESCAK J822MESCAK J03MESCAK 80V(K) K82MESYAK K82MESAAK K02MESYAK K02MESZAK K22MESYAK K22MESZAK K22MESAAK K22MESBAK K52MESYAK K52MESZAK K52MESAAK K82MESYAK K82MESZAK K82MESBAK K82MESCAK K222MESZAK K222MESAAK K222MESBAK K272MESBAK K272MESCAK K332MESAAK K332MESBAK K332MESCAK K392MESBAK K392MESCAK K472MESBAK K472MESCAK K562MESCAK K682MESCAK 00V(2A) A68MESYAK 2A68MESZAK 2A82MESYAK 2A82MESZAK 2A82MESAAK 2A82MESBAK 2A02MESYAK 2A22MESYAK 2A22MESZAK 2A22MESAAK 2A22MESBAK 2A22MESCAK 2A52MESYAK 2A52MESZAK 2A52MESAAK 2A82MESZAK 2A82MESAAK 2A82MESBAK 2A82MESCAK 2A222MESAAK 2A222MESBAK 2A222MESCAK 2A272MESBAK 2A272MESCAK 2A332MESBAK 2A392MESCAK 2A472MESCAK current at 85 C 20Hz 359
4 Dimensions (Snap-in Terminal Type : Grade TYPE-2) V(C) C222MESYBK C332MESZBK C392MESYBK C392MESABK C472MESYBK C472MESZBK C562MESBBK C682MESYBK C682MESZBK C682MESABK C822MESYBK C822MESZBK C822MESABK C822MESCBK C03MESYBK C03MESZBK C03MESABK C03MESBBK C23MESZBK C23MESABK C23MESBBK C23MESCBK C53MESABK C53MESBBK C83MESABK C83MESBBK C83MESCBK C223MESBBK C223MESCBK C273MESBBK C273MESCBK C333MESCBK V(V) V22MESZBK V52MESYBK V82MESZBK V82MESABK V222MESYBK V272MESYBK V272MESZBK V272MESABK V272MESBBK V332MESYBK V332MESZBK V332MESABK V392MESYBK V392MESZBK V392MESABK V392MESBBK V392MESCBK V472MESZBK V472MESBBK V562MESZBK V562MESABK V562MESCBK V682MESABK V682MESBBK V682MESCBK V822MESBBK V822MESCBK V03MESBBK V03MESCBK V23MESCBK V53MESCBK V(E) V(H) current at 85 C 20Hz E82MESYBK E222MESYBK E222MESABK E272MESYBK E272MESZBK E332MESYBK E332MESZBK E332MESBBK E392MESABK E472MESYBK E472MESZBK E472MESABK E472MESCBK E562MESYBK E562MESZBK E562MESABK E562MESBBK E682MESZBK E682MESABK E682MESBBK E822MESABK E822MESBBK E822MESCBK E03MESABK E03MESBBK E03MESCBK E23MESBBK E23MESCBK E53MESBBK E53MESCBK E83MESCBK H82MESZBK H02MESYBK H02MESABK H22MESYBK H22MESZBK H52MESYBK H52MESZBK H52MESBBK H82MESABK H222MESYBK H222MESZBK H222MESABK H222MESCBK H272MESYBK H272MESZBK H272MESABK H272MESBBK H332MESZBK H332MESABK H332MESBBK H392MESABK H392MESBBK H392MESCBK H472MESABK H472MESBBK H472MESCBK H562MESBBK H562MESCBK H682MESBBK H682MESCBK H822MESCBK H03MESCBK
5 Dimensions (Snap-in Terminal Type : Grade TYPE-2) 63V(J) J82MESYBK J82MESABK J02MESYBK J02MESZBK J22MESYBK J22MESZBK J22MESABK J22MESBBK J52MESYBK J52MESZBK J52MESABK J82MESYBK J82MESZBK J82MESBBK J82MESCBK J222MESZBK J222MESABK J222MESBBK J272MESABK J272MESBBK J272MESCBK J332MESABK J332MESBBK J332MESCBK J392MESBBK J392MESCBK J472MESBBK J562MESCBK J682MESCBK 80V(K) K82MESYBK K82MESZBK K82MESABK K82MESBBK K02MESYBK K02MESZBK K02MESABK K02MESCBK K22MESYBK K22MESZBK K22MESABK K22MESBBK K52MESZBK K52MESABK K52MESBBK K82MESABK K82MESBBK K82MESCBK K222MESABK K222MESBBK K222MESCBK K272MESBBK K272MESCBK K332MESBBK K332MESCBK K392MESCBK K472MESCBK 00V(2A) A68MESYBK 2A68MESZBK 2A68MESABK 2A82MESYBK 2A82MESZBK 2A82MESBBK 2A82MESCBK 2A02MESZBK 2A02MESABK 2A22MESZBK 2A22MESABK 2A22MESBBK 2A22MESCBK 2A52MESABK 2A52MESBBK 2A52MESCBK 2A82MESBBK 2A82MESCBK 2A222MESBBK 2A222MESCBK 2A272MESCBK 2A332MESCBK current at 85 C 20Hz 36
6 Dimensions (Snap-in Terminal Type : Grade TYPE-3) V(C) C02MESYCK C22MESZCK C52MESYCK C52MESACK C82MESZCK C222MESYCK C222MESBCK C272MESYCK C272MESACK C332MESYCK C332MESACK C332MESCCK C392MESYCK C392MESZCK C392MESACK C392MESBCK C472MESZCK C472MESACK C472MESBCK C472MESCCK C562MESACK C562MESBCK C682MESACK C682MESBCK C682MESCCK C822MESBCK C822MESCCK C03MESCCK C23MESCCK V(E) E68MESYCK E82MESZCK E02MESACK E22MESYCK E52MESYCK E52MESBCK E82MESYCK E82MESACK E222MESYCK E222MESZCK E222MESACK E222MESBCK E222MESCCK E272MESYCK E272MESZCK E272MESACK E332MESZCK E332MESACK E332MESBCK E332MESCCK E392MESACK E392MESBCK E472MESBCK E472MESCCK E562MESBCK E562MESCCK E682MESCCK E822MESCCK 35V(V) V82MESYCK V82MESACK V02MESYCK V02MESZCK V22MESYCK V22MESZCK V22MESACK V22MESBCK V52MESYCK V52MESZCK V52MESACK V82MESYCK V82MESZCK V82MESBCK V82MESCCK V222MESYCK V222MESZCK V222MESACK V222MESBCK V272MESACK V272MESBCK V272MESCCK V332MESACK V332MESBCK V332MESCCK V392MESBCK V392MESCCK V472MESBCK V472MESCCK V562MESCCK V682MESCCK V(H) H68MESYCK H68MESZCK H82MESZCK H82MESACK H82MESBCK H02MESYCK H22MESYCK H22MESACK H22MESBCK H22MESCCK H52MESYCK H52MESZCK H52MESACK H52MESBCK H82MESZCK H82MESACK H82MESCCK H222MESACK H222MESBCK H222MESCCK H272MESBCK H272MESCCK H332MESBCK H332MESCCK H392MESCCK H472MESCCK current at 85 C 20Hz
7 Dimensions (Snap-in Terminal Type : Grade TYPE-3) 63V(J) J68MESYCK J68MESZCK J68MESBCK J82MESYCK J82MESZCK J82MESACK J02MESYCK J02MESZCK J02MESACK J22MESYCK J22MESZCK J22MESBCK J22MESCCK J52MESZCK J52MESACK J82MESZCK J82MESACK J82MESBCK J82MESCCK J222MESACK J222MESBCK J272MESBCK J272MESCCK J332MESBCK J332MESCCK J392MESCCK J472MESCCK 80V(K) K68MESYCK K68MESZCK K68MESACK K82MESYCK K82MESZCK K82MESACK K82MESBCK K82MESCCK K02MESZCK K02MESACK K02MESBCK K22MESACK K22MESBCK K22MESCCK K52MESACK K52MESBCK K52MESCCK K82MESBCK K82MESCCK K222MESBCK K222MESCCK K272MESCCK K332MESCCK 00V(2A) A68MESZCK 2A68MESACK 2A82MESZCK 2A82MESACK 2A82MESBCK 2A82MESCCK 2A02MESACK 2A02MESBCK 2A02MESCCK 2A22MESBCK 2A22MESCCK 2A52MESBCK 2A52MESCCK 2A82MESCCK 2A222MESCCK current at 85 C 20Hz 363
8 Dimensions (Lug Terminal Type : Grade TYPE-) Rated Voltage (V)(code) 50V(H) H223MKNF 63V(J) J53MKNF J223MKNF K03MKNF 80V(K) 6.50 K53MKNF K223MKZF A682MKNF 00V(2A) A03MKNF 2A53MKZF A223MKZF Dimensions (Lug Terminal Type : Grade TYPE-2) Rated Voltage (V)(code) 50(H) H03MKN H53MKN H223MKZ J682MKN 63(J) J03MKN J53MKN L K G J M K Z 6.0 K682MKN 80(K) K03MKZ K53MKZ K223MKZ A682MKZ 00(2A) A03MKZ 2A53MKZ A223MKZ Dimensions (Lug Terminal Type : Grade TYPE-3) Rated Voltage (V)(code) 50(H) 63(J) 80(K) 00(2A) H682MKNS H03MKNS H53MKZS H223MKZS J682MKNS J03MKZS J53MKZS J223MKZS K682MKZS K03MKZS K53MKZS K223MKZS 2A682MKZS 2A03MKZS 2A53MKZS current at 85 C 20Hz 364
LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
Διαβάστε περισσότεραSmaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
Διαβάστε περισσότεραLS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). S Smaller G Specifications Item Category Temperature
Διαβάστε περισσότεραLGU. Low Profile. Smaller. LGW High Ripple Current LGN. Performance Characteristics. Measurement frequency : 120Hz Rated voltage (V)
Snap-in Terminal Type, 105 C Standard Withstanding hours application of rated ripple current at 105 C. Compliant to the RoHS directive (2011/65/EU). LGW High Ripple Smaller Low Profile Specifications LGN
Διαβάστε περισσότεραHigh Lipple Current. Low Profile. Smaller. Performance Characteristics to 100
Snap-in Terminal Type, 105 C Standard Withstanding hours application of rated ripple current at 105 C. Compliant to the RoHS directive (2011/65/EU). GW High Lipple Smaller GU Low Profile Specifications
Διαβάστε περισσότεραMINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. Characteristics. Leakage Current(MAX) I=Leakage Current(µA) C=Nominal Capacitance(µF) V=Rated Voltage(V)
SERIES 5 C Long Life. Low impedance. (Rated Voltage 6.3~V.DC) FEATURES Load Life : 5 C 4~hours. Low impedance at khz with selected materials. SPECIFICATIONS Items Operating Temperature Range Rated Voltage
Διαβάστε περισσότεραLS series Withstanding 3000 hours application of rated ripple current at 85 C.
Snap-in Terminal Type, Standard Withstanding 000 hours application of rated current at 85 C. S Smaller N Specifications Item Category Temperature Range Voltage Range Capacitance Range Capacitance Tolerance
Διαβάστε περισσότεραRJJ Miniature Aluminum Electrolytic Capacitors RJJ. Series RJJ High-Frequency, Low Impedance, Standard Type. Radial Type
352 Elna Corrections 80-95 /6/98 :55 AM Page Miniature Aluminum Electrolytic Capacitors Series High-Frequency, Low Impedance, Standard Type For high reliability applications, Environmentally safe. High-frequency,
Διαβάστε περισσότεραGU series. GU Low Profile ALUMINUM ELECTROLYTIC CAPACITORS. Specifications. Type numbering system (Example : 200V 680µF) Drawing
Snap-in Terminal Type, Wide Temperature Range Withstanding hours application of rated current at 105 C. Adapted to the RoHS directive (2002/95/EC). Smaller GU Low Profile Specifications Item Category Temperature
Διαβάστε περισσότερα+85 C Screw Terminal Aluminum Electrolytic Capacitors. For filtering applications. Capacitance change Dissipation factor Leakage current
For filtering applications FEATURES High ripple current High reiability range: 270µF to 680,000µF Voltage range: 6.3 to 450 SPECIFICATIONS Tolerance ±20% at 120 Hz, 25 C Operating Temperature Range Dissipation
Διαβάστε περισσότεραAluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Διαβάστε περισσότεραAluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
Διαβάστε περισσότερα+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
Διαβάστε περισσότεραSummary of Specifications
Snap Mount Large High CV High Ripple 85 C Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life for the series is 2,000 hours
Διαβάστε περισσότεραSuitable for DC-DC Converters, Voltage Regulators, Decoupling Applications for Computer Motherboards, etc. Performance Characteristics
+105 C, Higher Ripple, Lower than ULG Features Higher Ripple, Lower than ULG Wide Temperature Range RoHS Compliant Applications Suitable for DC-DC Converters, Voltage Regulators, Decoupling Applications
Διαβάστε περισσότεραPerformance Characteristics
Lug / Snap-in Terminal Type, For Audio Equipment Disigned for high grade audio equipment, giving priority to high fidelity sound quality. The variation expansion of the. TYPE-: The low profile high tone
Διαβάστε περισσότεραSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Διαβάστε περισσότεραAt +105 C no voltage applied after 1,000 hours and then being stabilized at +20 C the capacitors shall meet the following limits Shelf Life
+15 C, High Ripple Current (), Low Impendence () FEATURES ì ì Low impedance for high frequency. Life time: 1,~4, hours at 15 C. SPECIFICATIONS Miniature Aluminum Electrolytic Capacitors Item Performance
Διαβάστε περισσότερα+85 C General Purpose Radial Lead Aluminum Electrolytic Capacitors
+85 C General Purpose Radial Lead Aluminum Electrolytic acitors Applications Filtering Coupling Bypass Features Standard case sizes RoHS compliant Multiple case sizes Lead free Operating Temperature Range
Διαβάστε περισσότερα± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:
TS-UP Series 85 C, 3000 hours Compact size for general purpose and industrial applications 2 and 3 pin versions available 20mm lengths for low profile applications RoHS Compliant Rated Working Voltage:
Διαβάστε περισσότεραLong 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction
TS-HA/HB Series 105 C, 3000 hours Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature:
Διαβάστε περισσότεραI 0.01CV or 3 (μa) whichever is greater measured after 2 I 0.03CV +40 (μa) after 2 minutes application of rated
+15 C, General () FEATURES ì ì Rated working voltage range 6.3 to 1V DC / 16 to 45V DC at operation temperature range -4 to +15 C / -25 to +15 C. This series is for communication equipments, switching
Διαβάστε περισσότεραCountry of Origin. Japan Malaysia China
Radial Lead Type Series: FC Type :A n Features Endurance : 5 C 00 h to 5000 h Low impedance Country of Origin Japan Malaysia China n Specifications Category temp. range Rated W.V. Range Nominal Cap. Range
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Διαβάστε περισσότεραSpecification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)
High CV-value Long Life > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life Optimized designs available on request RoHS Compliant application Basic design Smoothing, energy storage,
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Διαβάστε περισσότεραType CGS High-Cap Screw Terminal Aluminum Electrolytic Capacitor
High CV, Screw Terminal Capacitors Specifications Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature: Ripple Current Multipliers: Type CGS screw terminal, aluminum electrolytic
Διαβάστε περισσότερα+85 C General Purpose Miniature Aluminum Capacitors
+85 C General Purpose Miniature Aluminum Capacitors Features- Increased CV Efficiency Non Polar Design Available (Special Order) General Specifications- Operating Temperature: -40 to +85 C Voltage Range:
Διαβάστε περισσότερα+105 C General Purpose Radial Lead Aluminum Electrolytic Capacitors. filtering
CKH/CKE +105 C Radial Lead s Standard case sizes Bypass Multiple case sizes coupling Lead free leads filtering Operating Temperature Range -55 C to +105 C (6.3 to 100 WVDC) -40 C to +105 C (160 to 400
Διαβάστε περισσότεραType 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
Διαβάστε περισσότεραMetal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Διαβάστε περισσότεραMCRH Series High Temp. Electrolytic Capacitors
Features: General purpose. Wide CV value range. Safety vent construction products, ECRH series are guaranteed for 000 hours at C. High temperature radial leaded electrolytic. Supplied loose with straight
Διαβάστε περισσότεραDistributed by: www.jameco.com -800-83-4242 The content and copyrights of the attached material are the property of its owner. φ δ δ φ φφ φ 86 δ φ δ An explanation of the taping dimensions can be found
Διαβάστε περισσότεραSurface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
Διαβάστε περισσότερα1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Διαβάστε περισσότεραMultilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Διαβάστε περισσότεραAluminum Capacitors C, Tubular, Radial Lead
Aluminum Capacitors + 105 C, Tubular, Radial Lead FEATURES Wide temperature range Radial design in two and three lead configuration Ideal SMPS output filter PERFORMANCE CHARACTERISTICS Operating Temperature:
Διαβάστε περισσότεραMetal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
Διαβάστε περισσότεραRoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. PRODUCT DETAIL Electrical Characteristics μh L (Min) Q MHz (Min) SRF Ω DCR IDC ma TEST FREQ: MHz TEST LEVEL: 100 mv Test Instruments HP4291
Διαβάστε περισσότεραMultilayer Chip Capacitors C0G/NP0/CH
Multilayer Chip Capacitors C0G/NP0/CH Features Good thermal stability High insulation resistance Low dissipation factor Low inductance Applications Resonant circuits Filter circuits Timing elements Coupling
Διαβάστε περισσότεραHIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
Διαβάστε περισσότεραMultilayer Chip Inductor / CL TYPE
Multilayer Chip Inductor / CL TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no lead
Διαβάστε περισσότεραApplications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
Διαβάστε περισσότεραPower Inductor LVS Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering LVS 6645 L - 1R M - AU Series Name Dimensions Code Inductance Internal Code (mm) (uh) Tolerance 4412 4.x4.x1.2 L Low DCR R47.47 M ±% 4418 4.x4.x1.8
Διαβάστε περισσότεραTHICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Διαβάστε περισσότεραHigh Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
Διαβάστε περισσότεραThin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Διαβάστε περισσότερα601D C Tubular Axial Lead Aluminum Capacitors. Features- Wide Temperature Range Military Version Mil-PRF-39018/03 Long Life Low ESR
+105 C Tubular Axial Lead Aluminum Capacitors 601D Features- Wide Temperature Range Military Version Mil-PRF-39018/03 Long Life Low ESR General Specifications- Operating Temperature: -55 to +105 C Voltage
Διαβάστε περισσότεραRC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
Διαβάστε περισσότεραCurrent Sense Metal Strip Resistors (CSMS Series)
Features: Range: 1mΩ to 100mΩ Low TCR as low as 75PPM High power rating Custom Values available RoHS Compliant and Halogen Free Operating Temperature: -55 C to +170 C Part Number Structure CSMS 0805 -
Διαβάστε περισσότεραPb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. FEATURES The monolithic construction performs high reliability and ensures a closed magnetic flux in a component avoids magnetic and interference
Διαβάστε περισσότεραC121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]
Multilayer Chip SDV Series Operating Temp. : -55 ~+125 FEATURES SMD type suitable for high density mounting Excellent clamping ratio and quick response time (
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Διαβάστε περισσότεραB37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Διαβάστε περισσότεραMetal Film Flame-Proof Resistors
Features -Low Noise -Low TCR from ±15~100PPM/ -High Precision from ±0.1%~1% -Complete Flameproof Construction UL-1412. -Coating meets UL94V-0 Applications -Telecommunication -Medical Equipment -Consumer
Διαβάστε περισσότεραAerovox Corp. Type H High Voltage AC & DC Capacitors. Film Capacitors for Power Electronics Applications. RoHS Compliant. Highlights.
H Aerovox Corp. Film Capacitors for Power Electronics Applications Specifications Outline Drawing Capacitance Range: AC Voltage Range: DC Voltage Range: Temperature Range: Capacitance Tolerance: Dissipation
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Διαβάστε περισσότεραCreative TEchnology Provider
1 Oil pplication Capacitors are intended for the improvement of Power Factor in low voltage power networks. Used advanced technology consists of metallized PP film with extremely low loss factor and dielectric
Διαβάστε περισσότεραSMD Power Inductor-VLH
SMD Power Inductor-VH Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 321618C 3.2±0.3 1.6±0.2
Διαβάστε περισσότεραType C Aluminum Electrolytic, Screw Terminal Best Value 85 C High Capacitance Screw Terminal Type
Type 386 85 C Aluminum Electrolytic, Screw Terminal While Type 386 s standard encasement is by compression with the capacitor element captured on an aluminum peg in the can bottom and a phenolic peg in
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
Διαβάστε περισσότεραInterference Suppression Capacitor
MOLDED BOX CONSTRUCTION, SUPPRESSION CAPACITOR, RADIAL LEAD FEATURES UL, CSA, VDE, CQC, CE, ENEC APPROVALS X2 SAFETY CAP CLASSIFICATION FOR USE IN ACROSS-THE-LINE APPLICATIONS METALLIZED POLYPROPYLENE
Διαβάστε περισσότεραNMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Διαβάστε περισσότεραConfigurations: Dimension (mm) B (max) A (max) 0.20 IWCCG1005. Inductance Range IWCCG ~ IWCCG ~ 1000 IWCCG
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Διαβάστε περισσότεραIWCSeries FEATURES APPLICATION ORDERING CODE TRIGON COMPONENTS. Configurations: Dimension (mm) IWC C G 1608 K 22N T (1) (2) (3) (4) (5) (6) (7)
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Διαβάστε περισσότεραChilisin Electronics Singapore Pte Ltd
hilisin Electronics ingapore Pte Ltd High urrent hip Beads, PBY eries Feature: Our MD High urrent hips Beads is specially designed to with tand large urrents while providing a means of EMI/RFI attenuation
Διαβάστε περισσότεραELECTROLYTIC, Snap-in, 2 pin
CAPACITORS ELECTROLYTIC, Snap-in, 2 pin NOVER type LS A range of high CV, high ripple current, aluminium electrolytic capacitors suitable for general purpose use. Housed in compact bodies and fitted with
Διαβάστε περισσότεραSMD Power Inductor-VLH
SMD Power Inductor-VH PAD AYOUT Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252510 2.5±0.2
Διαβάστε περισσότεραLR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Διαβάστε περισσότεραAPPLICATIONS General medium power DC/DC convertors. CASE DIMENSIONS: millimeters (inches)
Low FEATURES Low series of robust Mn0 2 solid electrolyte capacitors CV range: 0.15-1500μF / 2.5-50V 14 case sizes available Power supply applications APPLICATIONS General medium power DC/DC convertors
Διαβάστε περισσότεραC4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Διαβάστε περισσότεραItem Performance Test condition (IEC ) Operating temperature 55ºC + 105ºC. Rated temperature + 105ºC. Range 3.3 μ F 1,000 μ F 120Hz
Low ESR / RoHS Compliant PS/L series is the standard product of NeoCapacitor TM. PS/L series can provide space-saving solution and low ESR. Performance Characteristics Item Performance Test condition (IEC
Διαβάστε περισσότεραPrecision Metal Film Fixed Resistor Axial Leaded
Features EIA standard colour-coding Non-Flame type available Low noise and voltage coefficient Low temperature coefficient range Wide precision range in small package Too low or too high ohmic value can
Διαβάστε περισσότεραSMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
Διαβάστε περισσότεραTDK Electronics Europe GmbH Head Office TDK Electronics Italy TDK Stuttgart TDK Electronics UK Regional Office
TDK Hi Caps Step Replacement guide to Multilayer Ceramic Chip Capacitor Step Step 3 Choose the right rated voltage from the attached chart Replace at the min.cap value Decide cap value and the item example
Διαβάστε περισσότεραFixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Διαβάστε περισσότεραRF series Ultra High Q & Low ESR capacitor series
RF series Ultra High Q & Low ESR capacitor series FAITHFUL LINK Features Application» High Q and low ESR performance at high frequency» Telecommunication products & equipments:» Ultra low capacitance to
Διαβάστε περισσότεραCASE DIMENSIONS: 1.27±0.13 (0.050±0.005) A 2.54 (0.100) 1.27 (0.050) 1.27 (0.050) 1.27±0.13 (0.050±0.005) B 3.81 (0.150) 1.27 (0.050) 1.27 (0.
MARKING (White marking on black body) Polarity Stripe (+) Code Rated Voltage The T4Z HRC4000 Medical Grade series is designed for use in non-critical medical applications. The T4Z product line is based
Διαβάστε περισσότεραOperating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
Διαβάστε περισσότεραCSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Διαβάστε περισσότεραIN STOCK. 800-731-1433 Fax: 631-737-1556 The only number you need for all capacitors!
CAT#101 DISTRIBUTOR PRICE SHEET Largest Selection of current, hard to find and obsolete capacitors in the world. IN STOCK 800-731-1433 Fax: 631-737-1556 The only number you need for all capacitors! 136-2
Διαβάστε περισσότεραThin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) Type EI Size Power Rating at 70
Διαβάστε περισσότερα1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat (Epoxy)
ARN series Thin Film High Precision Chip Resistor Features» Advanced thin film technology» Very tight tolerance down to ±0.01%» Extremely low TCR down to ±5ppm/» Wide resistance range 1ohm-3Mega ohm» Miniature
Διαβάστε περισσότεραThick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MW) THICK FILM ON ALUMINA SUSTRATE,
Διαβάστε περισσότεραCeramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Διαβάστε περισσότεραCarbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
Διαβάστε περισσότεραSeries AM2DZ 2 Watt DC-DC Converter
s Single output FEATURES: RoHS Compliant Operating temperature -40 o C to + 85 o C Low ripple and noise Pin compatible with multiple manufacturers High efficiency up to 82% Input / Output Isolation 1000,3000,
Διαβάστε περισσότεραUnshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
Διαβάστε περισσότεραCurrent Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
Διαβάστε περισσότεραLow Value Multilayer Inductors (LMCI Series)
Structure Features: RoHS Compliant and Halogen Free Closed magnetic circuit configuration avoids crosstalk and is suitable for high density PCBs Size range: 0201, 05, 1608 Perfect shape for automatic mounting
Διαβάστε περισσότεραPEH C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life
PEH 169 85 C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life APPLICATION BASIC DESIGN Smoothing, energy storage, or pulse operation in telecommunication
Διαβάστε περισσότεραFixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Διαβάστε περισσότεραThin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) RoHS Compliant includes all homogeneous
Διαβάστε περισσότεραSurface Mount Multilayer Inductor
FETURES 0603, 0805, 0806 ND 1008 CSE SIZES HIGH CURRENT ND LOW RESISTNCE NEW "S" VERSION FOR INCRESED STURTION CURRENT UGRDED "H" VERSION FOR HIGHEST CURRENT REFLOW SOLDERING LICBLE CKGE FOR UTOMTIC ICKLCE
Διαβάστε περισσότεραYJM-L Series Chip Varistor
Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
Διαβάστε περισσότερα