SMC SERIES Subminiature Coaxial Connectors
|
|
|
- בַּעַל־זְבוּל Νικολαΐδης
- 5 χρόνια πριν
- Προβολές:
Transcript
1 SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement for low frequency applications. Main fields of applications are internal connections and miniature coaxial components. Vibration-proof connection, specially suited for semi-permanent connections, is used in mobile equipments. INTERFACE MATING DIMENSIONS PLUG: J NO.10-32UNF-2B SEE NOTE 1 ØH ØA Millimeters (Inch) Letter Minimum Maximum A 3.3(.133) 3.81(.150) B 0.00 C 3.40(.134) D 2.9(.110) B D E F C G REF. PLANE E 3.10(.122) F 3.40(.134) G 5.92(.233) H 2.06(.081) J 2.9(.110) JACK: K D L Letter Millimeters (Inch) Minimum Maximum A 2.08(.082) B 3.1(.146) C 0.25(.010) ØB ØA ØE ØC D 3.12(.123) 3.38(.133) E 0.48(.019) 0.53(.021) F 0.61(.024) H F J G REF. PLANE G 3.40(.134) H (.012) J 3.40(.134) 3.66(.144) K 5.94(.234) L 2.13(.084) NOTES 1. ID TO MEET VSWR AND CONTACT RESISTANCE WHEN MATED WITH.508±.0254MM DIA PIN. 2. MESA S CONNECTORS MEET THE INTERFACE REQUIREMEMTS OF MIL-STD-348A 54
2 TECHNICAL DATA Electrical Data Cable Dielectric Diameter 0.86(.034) 1.5(.059) Dielectric Withstanding Voltage (at sea level, in V rms, 50 Hz) Working Voltage (at sea level, in V rms, 50 Hz) Impedance Frequency Range Insulation Resistance Contact Resistance Inner conductor Contact Resistance Outer conductor 50Ω DC up to 10 GHz 10000MΩ 6mΩ 1mΩ Mechanical Data Recommended Coupling Nut Torque Coupling Proof Torque Coupling Nut Retention Force Contact Captivation Durability (matings) 2.2 to 3.1 in.-lbs 6.2 in.-lbs 33.2 lbs 2.25 lbs 500 Environmental Data Temperature Range Thermal Shock -65 C +165 C MIL-STD-202,Method 10,Condition B Moisture Resistance MIL-STD-202,Method 106 Corrosion MIL-STD-202, Method 101, Condition B VSWR Frequency Range 1GHz 3GHz 5GHz 10GHz Cable Type / RG14, RG188, RG316, RD316 Typical VSWR for / RG18, RG196 Straight Connectors Semi-rigid Semi-rigid / RG14, RG188, RG316, RD316 Typical VSWR for / RG18, RG196 Right Angle Connectors Semi-rigid Semi-rigid
3 21.9 (.862) ø4.4 (ø.13) 16.2 (.638) ø1.9 (ø.05) ø2.8 (ø.110) 15.8 (.622) ø2.35 (ø.093) Figure 1 Figure 2 Figure (.636) ø4.4 (ø.13) 14.8 (.583) (.561) (.490) 13.6 (.535) Figure 4 Figure 5 Figure (.583) 9.05 (.356) (.059) (.155) 13.5 (.531) 0.5 (.020) ø0.95 (ø.03) ø4.08 (ø.161) ø6.1 (ø.240) ø6. S.Q. (ø.264 S.Q. ) ø (ø.040) (.596) (.132) (.020) (.155) 13 Figure Figure 8 Figure 9 ø0.95 (ø.03) ø (ø.160) ø6.1 (ø.240) ø6. S.Q. (ø.264 S.Q.) ø (ø.040) PART NUMBER Fig. Measurements M.H. Weight Material Suitable Cable Remarkes PLUG CRIMP MMCMCCP g C4 RG58, M195 MMCMCCP C4 RG55, RG142, RG142-E, RG400 MMCMCCP C4 RG223 MMCMCCP g C4 RG18,RG18-FEP, RG196 MMCMCCP-19 3 =1.65 (.065) 1.8g C4 RG19,RG19-FEP 5Ω Impedance MMCMCCP =1.6 (.063) 1.82g C4 RG14,RG188,RG316,RG316-E,RG316-FEP MMCMCCP-316D 3 =1.6 (.063) 1.g C4 RD316,RG316D-E,RD316-FEP For Double Braided 316 PLUG CRIMP RIGHT ANGLE MMCMCRACP g C4 RG58, M195 MMCMCRACP C4 RG55, RG142, RG142-E, RG400 MMCMCRACP C4 RG223 MMCMCRACP-18 5 =1.00 (.039) =1.8 (.01) 2.89g B4 RG18,RG18-FEP,RG196 MMCMCRACP-19 5 =1.65 (.065) =2.35 (.093) 2.92g B4 RG19,RG19-FEP 5Ω Impedance MMCMCRACP =1.6 (.063) =2.35 (.093) 2.96g B4 RG14,RG188,RG316,RG316-E,RG316-FEP MMCMCRACP-316D 5 =1.6 (.063) =2.35 (.093) 2.86g B4 RD316,RG316D-E,RD316-FEP For Double Braided 316 PLUG SOLDER MMCMCDSP =2.3 (.091) =3.5 (.138) 1.46g C4 Semi-rigid.085 MMCMCDSP =3.65 (.144) =4.8 (.189) 1.46g C4 Semi-rigid.141 PLUG SOLDER RIGHT ANGLE MMCMCRADSP-034 =1.0 (.039) =2.0 (.09) B4 Semi-rigid.034 MMCMCRADSP-04 =1.39 (.051) =2.2 (.08) B4 Semi-rigid.04 MMCMCRADSP-085 =2.3 (.091) =3.2 (.126) 2.52g B4 Semi-rigid.085 PLUG P.C.B MOUNT MMCMCPMP g C4 PLUG P.C.B MOUNT RIGHT ANGLE MMCMCRAPMP g B4 (ø.059)x4 ø1.1 (ø.043) M.H 95 om Tel: Fax: sales@mesamicrowave.com 56
4 HE (.23 ø6.5 (ø.256) MESA MICROWAVE 6 X ) 19.5 (.68) Figure 1 Figure (.84) Ø3.1 (Ø.122) Ø4.4 (Ø.13) 3.0 MAX. (.118 MAX.) 11 2 (.433) (.09) 16 (.630) 1.5 (.689) Figure 3 Figure (.539) ø8 (ø.315) Figure 5 Figure MAX. (.118 MAX.) 11 (.433) 15.3 (.602) 2 (.09) ø2.3 (ø.091) ø3.5 (ø.138 ) ø6.5 (ø.256) 4 (.15) NO.10-36UNF-2A 11.4 (.449) Figure 1.6 (.693) 3.3 MAX. (.130 MAX.) 1. (.06) ø2.3 (ø.091) ø3.4 (ø.134) ø.2 (ø.283) Ø4.9 (Ø.193) 4.5 (.1) 4.2 (.165) M.H 1 M.H 122 ø4.8 (ø.189) PART NUMBER Fig. Measurements M.H. Weight Material Suitable Cable Remarks PLUG TERMINATOR MMCMCTP2W-6Z 1 3g C4 2W Average Power; VSWR 1.2 up to 6GHz JACK CRIMP MMCMCCJ g A1 RG58, M195 MMCMCCJ A1 RG55, RG142, RG142-E, RG400 MMCMCCJ A1 RG223 MMCMCCJ-18 3 =1.00 (.039) =1.80 (.01) A1 RG18,RG18-FEP,RG196 MMCMCCJ =1.6 (.063) =2.35 (.093) 1.0g A1 RG14,RG188,RG316,RG316-E,RG316-FEP MMCMCCJ-316D 3 =1.6 (.063) =2.35 (.093) 2.09g A1 RD316,RG316D-E,RD316-FEP JACK CRIMP FOR BULKHEAD MMCMCBHCJ-18 4 =2.3 (.091) =3 (.118) g A1 RG18,RG18-FEP,RG196 MMCMCBHCJ-19 4 =1.65 (.065) =2.35 (.093) g A1 RG19,RG19-FEP Impedance= 5Ω MMCMCBHCJ =1.6 (.063) =2.35 (.093) g A1 RG14,RG188,RG316,RG316-E,RG316-FEP MMCMCBHCJ-316D 4 =1.6 (.063) =2.35 (.093) g A1 RD316,RG316D-E,RD316-FEP JACK SOLDER MMCMCDSJ =2.30 (.091) =3.5 (.138) 1.39g A1 Semi-rigid.085 MMCMCDSJ =3.65 (.144) =4.8 (.189) 1.42g A1 Semi-rigid.141 MMCMCDSJ =3.65 (.144) =4.8 (.189) A1 5Ω Semi-rigid.141 Impedance= 5 Ω JACK SOLDER FOR BULKHEAD MMCMCBHDSJ g A1 Semi-rigid.085 MMCMCBHDSJ-85A g A1 Semi-rigid.085 5
5 13.8 (.543) (.020) (.155) (.40) 6. S.Q. (.264 S.Q.) (.132) 13 (.155) 6.1 (.240) 6. S.Q. (.264 S.Q.) Figure 1 Figure (.12) 10. (.421) 3.2 MAX. (.126 MAX.) 2.2 MAX. (.08 MAX.) Ø3 (Ø.118) Ø8 (Ø.315) (.039)(.181) (.098) (.132) (.155) (.591) (.240) 6. SQ. Figure 3 (.264 S.Q) Figure 4 ø8 (ø.315) 2. MAX. (.106 MAX.) ø3 (ø.118) (.059) (.039) (.020) (.01) (.098) 15 (.591) 20.5 (.80) 4 11 (.15) (.433) ø0.98 (ø.039) ø14 (ø.551) (.26) 11 S.Q. (.433 S.Q.) ø2.2 (ø.08) Figure 5 Figure 6 (ø.059x4) ø1 (ø.039) (ø.059x4) ø0.9 (ø.035) 4.5 (.1) Ø4.9 (Ø.193) (ø.059)x4 ø0.6 (ø.024) (.26) 3.5 (.138) (.26) 3.5 (.138) ø2.2x4 ø3.2 (ø.08x4) (ø.126) M.H 4 M.H 48 M.H 1 M.H 8 M.H 66 PART NUMBER Fig. Measurements M.H. Weight Material Remarks JACK P.C.B MOUNT MMCMCPMJ 1 =0.93 (.03) g A1 MMCMCPMJ 1 =0.83 (.033) g A1 Impedance=5 ohm JACK P.C.B MOUNT RIGHT ANGLE MMCMCRAPMJ 2 =0.95 (.03) g A1 MMCMCRAPMJ 2 =0.83 (.033) g A1 Impedance=5 ohm MMCMCRAPMJ-AD 3 =0.95 (.03) 4&1 3.51g A1 MMCMRAPMJ-A 3 =0.51 (.020) 8&1 A1 Impedance=5 ohm JACK FOR BULKHEAD MMCMCBHJ g A1 MMCMCBHJ g A1 JACK FOR PANEL RECEPTACLE MMCMCPRJ-RE g A1 Tel : Fax: sales@mesamicrowave.com 58
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
MMCX SERIES Microminiature Coaxial Connectors
SERIES Microminiature Coaxial Connectors FEATURES connectors are smaller than MCX connectors and are used from DC up to 6 GHz in applications where a tiny size is crucial. INTERFACE MATING DIMENSIONS PLUG:
BMA SERIES Subminiature Blind Mate Connectors
SERIES Subminiature Blind Mate Connectors FEATURES The blindmate connectors are designed for blindmate applications up to Ghz. They have a slide-on, non-locking interface which ensures frequent matings
SMB SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50Ω impedance for applications up to 4GHz. Suited for cables with dielectric diameters of up to 1.5mm. The connectors
CMPTER SMA CONNECTORS. ... A Vital Part of Connection World
... A Vital Part of Connection World Receptacles With Accepts Pin Receptacles Metal Through The Wall Receptacles Insulator Through The wall Receptacles Air ine Through The wall Receptacles With Tap Receptacles
CMPTER 2.92MM CONNECTORS. ... A Vital Part of Connection World. Receptacles With Accepts Pin Receptacles, Metal Through The Wall
... A Vital Part of Connection World Receptacles With Accepts Pin Receptacles, Metal Through The Wall Receptacles, Insulator Through The Wall Receptacles, Air ine Through The Wall PCB Connectors 2.92MM
DEUTSCH 983 Series Filter Connectors MIL-DTL SERIES III
DEUTSCH 93 Series Connectors are MIL-DTL-3723 Series III style connectors meeting ESC, ESC15, and EN2997 standards. With medium-density insert arrangements, fine threaded coupling, and corrosion resistant
DEUTSCH RR Series Filter Connectors MIL-DTL SERIES 2
DUTSCH ilter Connectors DUTSCH RR Series ilter Connectors MIL-DTL-2642 SRIS 2 DUTSCH RR Series connectors are medium-density, MIL-DTL-2642 Series 2 circular connectors using a bayonet coupling with visible
RF CABLE SEMI-RIGID COAXIAL CABLE
RF ABBREVIATIONS FEP PE PTFE PVC SPC SPCW TPC SPEX : Fluorinated Ethylene Propylene : Polyethylene : Polytetrafluoroethylene : Polyvinyl Chloride : Silver Plated Copper : Silver Plated Copperweld : Tin
2.92mm. Precision 40GHz Connectors
2.92mm Precision 40GHz Connectors 2.92mm Precision Connectors ESCRIPTION 2.92mm connectors are 50ohm precision connector designed to operate up to 40GHz. The outer conductor measures 2.92mm and has a strong
B37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
0.635mm Pitch Board to Board Docking Connector. Lead-Free Compliance
.635mm Pitch Board to Board Docking Connector Lead-Free Compliance MINIDOCK SERIES MINIDOCK SERIES Features Specifications Application.635mm Pitch Connector protected by Diecasted Zinc Alloy Metal Shell
2.4mm Series Connectors
2.4mm Series Connectors Table of Contents 2.4mm Series Connectors(DC~50GHz)... 1 2.4mm Replaceable Connectors... 2 2.4mm Receptacle (Round Contact) Connectors... 7 2.4mm Receptacle (Exposed Teflon) Connectors...
Datasheet. MIL-DTL series III circular electrical connector / 18
Datasheet MIL-DTL-38999 series III circular electrical connector 1 / 18 MIL-DTL-38999 series III circular electrical connector Brief introducing how to order Outline dimension Rear accessory Characteristic
ELWOOD HIGH PERFORMANCE MOTORS H-SERIES MOTOR DATA
H-SERIES MOTOR DATA MOTOR MODEL H-3007 H-3016 H-4030-P H-4030-M H-4040 H-4050 H-4075 H-6100 H-6200 H-6300 MECHANICAL DATA (1) Rated Torque, Cont (Stall) 0.8 2.3 3.4 3.4 5.0 6.8 10.2 11.3 22.6 36.7 lb-in
SMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat (Epoxy)
ARN series Thin Film High Precision Chip Resistor Features» Advanced thin film technology» Very tight tolerance down to ±0.01%» Extremely low TCR down to ±5ppm/» Wide resistance range 1ohm-3Mega ohm» Miniature
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Multilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Electrical Specifications at T AMB =25 C DC VOLTS (V) MAXIMUM POWER (dbm) DYNAMIC RANGE IP3 (dbm) (db) Output (1 db Comp.) at 2 f U. Typ.
Surface Mount Monolithic Amplifiers High Directivity, 50Ω, 0.5 to 5.9 GHz Features 3V & 5V operation micro-miniature size.1"x.1" no external biasing circuit required internal DC blocking at RF input &
MIL-DTL Micro-D Connector R04J Series Straight to PCB Type
MIL-TL-353 Micro- onnector R4J Series Straight to P Type Specication MIL-TL-353 Micro- onnector nvironment temperature: ~ Vibration: Hz~Hz, 6m/s Random vibration: Power spectrum density.4g Hz root mean
4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
NTC Thermistor:SCK Series
Features. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φmm:-40~+70
CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
38BXCS STANDARD RACK MODEL. DCS Input/Output Relay Card Series MODEL & SUFFIX CODE SELECTION 38BXCS INSTALLATION ORDERING INFORMATION RELATED PRODUCTS
DCS Input/Output Relay Card Series STANDARD RACK MODEL 38BXCS MODEL & SUFFIX CODE SELECTION 38BXCS MODEL CONNECTOR Y1 :Yokogawa KS2 cable use Y2 :Yokogawa KS9 cable use Y6 :Yokogawa FA-M3/F3XD32-3N use
Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
SMD Power Inductor-VLH
SMD Power Inductor-VH Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 321618C 3.2±0.3 1.6±0.2
Current Sense Metal Strip Resistors (CSMS Series)
Features: Range: 1mΩ to 100mΩ Low TCR as low as 75PPM High power rating Custom Values available RoHS Compliant and Halogen Free Operating Temperature: -55 C to +170 C Part Number Structure CSMS 0805 -
2.92mm Series Connector
2.92mm Series Connector Table of Contents 2.92mm Series Connector(DC~40GHz)... 1 2.92mm Replaceable Connectors... 2 2.92mm Receptacle (Round Contact) Connectors... 7 2.92mm Receptacle (Exposed Teflon)
Data sheet Thin Film Chip Inductor AL Series
Data sheet Thin Film Chip Inductor AL Series Scope - 0201 and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and
RF CABLE .047 CU - C - P C : Silver plated copper(spc) W : Silver plated copperweld(spcw) Dielectric P : PTFE F : FEP
RF ABBREVIATIONS: CW FEP PE PTFE PVC SPC SPCW TPC SPEX LDPTFE : Copper Covered Steel Wire : Fluorinated Ethylene Propylene : Polyethylene : Polytetrafluoroethylene : Polyvinyl Chloride : Silver Plated
Thin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
HSB Series. 1. Specifications DIN VDE 0110 Concerning clearance and creepage distances DIN VDE 0627 Connectors and plug devices
HSB Series 1. Specifications DIN VDE 0110 Concerning clearance and creepage distances DIN VDE 0627 Connectors and plug devices 2. Standards DIN EN 60 664-1 DIN EN 61 984 3. Approvals 169 All specifications
Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
SMD Power Inductor-VLH
SMD Power Inductor-VH PAD AYOUT Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252510 2.5±0.2
AT Surface Mount Package SOT-363 (SC-70) I I Y. Pin Connections B 1 C 1 E 1 E 2 C 2 B , 7:56 PM
AT-3263 Surface Mount Package SOT-363 (SC-7) I I Y Pin Connections B 1 C 1 E 1 E 2 C 2 B 2 Page 1 21.4., 7:6 PM Absolute Maximum Ratings [1] Absolute Thermal Resistance [2] : Symbol Parameter Units Maximum
High-Frequency SMA Connectors 26.5 GHz
High-Frequency SM Connectors 26.5 GHz Volume 1 Table of contents on page 2 ISO9001:2000 Certified (978) 927-1060 www.deltarf.com SM 26.5 GHz Connectors General Description These extended-frequency, general-purpose
Specifications C2504 SERIES. Standards E E326732
Specifications Current rating:3 C,DC Voltage rating:250v C,DC Temperature range:-40 C~+105 C Contact resistance:20mω Max. Insulation resistance:1000mω Min. Withstanding voltage:1000v C/minute *Compliant
SAW FILTER - RF RF SAW FILTER
FEATURES - Frequencies from 0MHz to 700MHz - Custom specifications available - Industry standard package configurations - Low-loss saw component - Low amplitude ripple - RoHS compliance - Electrostatic
2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
![2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%](/thumbs/78/78109689.jpg "2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%")
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Anti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
500mW Zener Diodes TZXJ2.0A TZXJ mW Zener Diodes. Features. Mechanical Data. Maximum Ratings (T Ambient=25ºC unless noted otherwise)
Features Planar Die Construction 500mW Power Dissipation Zener Voltage: 2.0V to 56V Ideally Suited for Automated Assembly Processes RoHS compliant and Halogen Free DO-35 Mechanical Data Case: Molded glass
Gearmotor Data. SERIES GM9000: We have the GM9434H187-R1
SERIES GM9: We have the GM9434H187-R1 Gearmotor Data Item Parameter Symbol Units 5.9:1 11.5:1 19.7:1 38.3:1 65.5:1 127.8:1 218.4:1 425.9:1 728.1:1 1419.8:1 2426.9:1 4732.5:1 1 Max. Load Standard Gears
Terminal Contact UL Insulation Designation (provided with) style form system approval Flux tight
eatures A miniature PCB Power Relay. form A contact configuration with quick terminal type. 5KV dielectric strength, K surge voltage between coils to contact. Ideal for high rating Home Appliances of heating
Type 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
Metal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Accu-Guard II. SMD Thin-Film Fuse ELECTRICAL SPECIFICATIONS
Accu-Guard II is a version of Accu-Guard fuses for a wider range of current and voltage ratings. Con struct ed on alumina substrates, Accu-Guard II fuses display superior electrical, mechanical and en
High Current Chip Ferrite Bead MHC Series
High Current Chip Ferrite Bead MHC Series Features Combination of high frequency noise suppression with capability of handing high current. The current rating up to 6 Amps with low DC. Applications High
MIL-DTL Micro-D Connector R04J Series Crimp Contact Type
R MIL-TL-353 Micro- onnector MIL-TL-353 Micro- onnector R04J Series rimp ontact Type Introduction Micro- connectors Twist pin contact, high density interconnection Metal shell,plated nickel or cadmium
LR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
NTC Thermistor:SCK Series
Features. RoHS & HF compliant 2. Body size: Ф5mm ~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70
Thin Film Chip Inductor
Scope -Calchip s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Calchip s design provides high, excellent Q, and superior temperature stability. This highly
Features. Terminal Contact Enclosure style style form Open type Dust cover Ears on cover Antirotation-tab Ears on top
SONG CHUN Features 20/2 general purpose Power Relays. SPDT, DPDT, TPDT contact configurations. DC & C coils are both available. Optional for flange covers, tapped core w/anti-rotation tab, indicator lamp,
Thin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) Type EI Size Power Rating at 70
CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Thin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) RoHS Compliant includes all homogeneous
Thin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to PPM/ C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
MAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
Data/LAN Cables Cat 6 F/UTP PVC
Data/LAN Cables Cat 6 F/UTP PVC RoHS REACH Application 10 BASE-T (IEEE 802.3) Ethernet. 100 BASE-T (IEEE 802.3u) Fast Ethernet 100 VG-AnyLAN (IEEE 802.12). 4/6 Mbps Token Ring (IEEE 802.5) 100 Mbps CDDI.
Metal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
Applications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
WEB Series. RoHS Compliant. Waterproof Miniature Circular Connector SPECIFICATION MATERIAL/FINISH WEB FEATURE
Series RoHS ompliant Waterproof Miniature ircular onnector series connectors meet the performance criteria of most factory automation applications as they are waterproof and withstand exposure to water,
THICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
LR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
RSDW08 & RDDW08 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (Typ.) CAPACITOR LOAD (MAX.) RSDW08F-03 344mA 3.3V 2000mA 80% 2000μF RSDW08F-05
Surface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
LR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
CSKA series. Current Sensing Chip Resistor Automotive. Features. Applications. Construction FAITHFUL LINK
CSKA series Current Sensing Chip Resistor Automotive Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate
YAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.
YAGEO CORPORATION SMD INDUCTOR / BEADS CLH Series Multilayer Chip Inductors High Frequency Lead-free / For High Frequency Applications APPLICATIONS RF Resonance and Impedance Matching Circuit RF and Wireless
DATA SHEET Surface mount NTC thermistors. BCcomponents
DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped
Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
Control cable YSLY-JZ/-JB/-OZ/-OB
Control cable YSLY-JZ/-JB/-OZ/-OB conductor material: bare copper conductor construction: fine stranded, class 5 insulation: PVC TI1 stranding unit: core sheathing material: PVC TM2 colour of outer sheath:
Thin Film Precision Chip Resistor-AR Series
hin Film Precision Chip Resistor-AR Series Construction L D1 3 4 5 6 D2 9 8 7 1 2 1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat
Thin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to ±5PPM/C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
Bulletin 1489 UL489 Circuit Breakers
Bulletin 489 UL489 Circuit Breakers Tech Data 489-A Standard AC Circuit Breaker 489-D DC Circuit Breaker 489-A, AC Circuit Breakers 489-D, DC Circuit Breakers Bulletin 489-A Industrial Circuit Breaker
10.16mm PITCH TERMINAL CONNECTOR 4.34(0.171) 3.5(0.138) 9.5(0.374) 19.5(0.768) 3(0.118) 7.085(0.279) 8.485(0.334) 21(0.827) 14(0.
7010 SRIS 10.16mm PITH TRMINL ONNTOR 4.345 (0.171) 3.5 (0.138) 19.5(0.768) 9.5 (0.374) 4.34(0.171) Ref. 10.585(0.417) Ref. 1.9(0.075) Ref. 2.2(0.087) ORR O 7010 160 : RoHS ompliance ontact name 160 : Receptacle
D-SUB SOLDER TYPE ORDER INFORMATION. Bestell Code/Order Code: DST (Stecker / Male) L DBU (Buchse / Female) L
D-SUB SOLDER TYPE DST (Stecker / Male) - - - L DBU (Buchse / Female) - - - L = Polzahl / No. of contacts (9,15,25,37) = Isolierkörper weiß / Insulator white L = Lötkelch / Solder Type 1 D-SUB P.C.B. STRAIGHT
Thick Film Array Chip Resistor
CN Series Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Reduction of assembly costs and
Metal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication
± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:
![± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:](/thumbs/85/91419422.jpg "± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:")
TS-UP Series 85 C, 3000 hours Compact size for general purpose and industrial applications 2 and 3 pin versions available 20mm lengths for low profile applications RoHS Compliant Rated Working Voltage:
SMD Transient Voltage Suppressors
SMD Transient Suppressors Feature Full range from 0 to 22 series. form 4 to 60V RMS ; 5.5 to 85Vdc High surge current ability Bidirectional clamping, high energy Fast response time
Ceramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Stamped contacts Crimp male contacts diameter 1,6 mm for wire gauge AWG silver plated Part No. VN (1) Contact Stamped contacts
Stamped contacts Crimp male contacts diameter 1,6 mm for wire gauge AWG - 16 silver plated VN 01 016 0002 ( Series Subseries Contacts Contact Stamped contacts Common Characteristics Contact diameter 1,6
Applications Coaxial cables for high frequency. Coaxial cables from 50 Ω to 95 Ω. Construction
Standard coaxial cables KX & RG coaxial cables KX/RG Applications Coaxial cables for high frequency connections. Coaxial cables from 50 Ω to 95 Ω Construction 1- CONDUCTOR Stranded or solid, in bare copper
Contact resistance : environmental class hermetic class. Insulation resistance : 5000 mω at 500 Vdc
8526 eries pplications or all general purposes in aeromil area. tandards N 934 H 3 TT 5935 x 1 haracteristics Mechanical ndurance : 5 operations hock : according to N 934 H 3 Vibrations : to Hz, g ontact
High Voltage Ceramic Capacitor (Radial Disc Type)
High Voltage Ceramic Capacitor (Radial Disc Type) 1. Material Characteristics Series No TEMP. CHAR. Working Temperature ( ) Insulation Resistance ( MΩ) 1 UJ -25~+85 100000 2 SL -25~+85 100000 Disspation
SMD - Resistors. Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612 official distributor of 1. Scope Thick Film Chip Resistor-SMDC Series -This specification applies
THICK FILM CHIP RESISTOR" CAL-CHIP ELECTRONICS INC."
THICK FILM CHIP RESISTOR CAL-CHIP ELECTRONICS INC. CAL-CHIP SERIES: RM SERIES 1 2 3 INTRODUCTION SCOPE Applies to all sizes of rectangular-type fixed chip resistors with Ruthenium base as material. FEATURES
Carbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
NPN SILICON OSCILLATOR AND MIXER TRANSISTOR
FEATURES NPN SILICON OSCILLATOR AND MIXER TRANSISTOR LOW COST HIGH GAIN BANDWIDTH PRODUCT: ft = MHz TYP LOW COLLECTOR TO BASE TIME CONSTANT: CC r b'b = 5 ps TYP LOW FEEDBACK CAPACITANCE: CRE=.55 pf TYP
NO: 250 / 3 NC: 250 / 2 NO: 250 / 5 NC: 250 / 2 to IEC/EN DC 13 5) NO: 24 / 2 NC: 24 / 2 at 0.1 Hz DC 13 5) DC V/A
PCB relays Safety relays monostable OA 601, OA 60, OA 603 OA 601 OA 60 OA 603 Acc. to DIN EN 00, DIN EN 61810-1, DIN EN 60664-1 With forcibly guided contacts Clearance and creepage distances, contact-coil
Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512 official distributor of Thick Film Chip Resistor-SMDC Series 1. Scope -This specification applies to all
RF series Ultra High Q & Low ESR capacitor series
RF series Ultra High Q & Low ESR capacitor series FAITHFUL LINK Features Application» High Q and low ESR performance at high frequency» Telecommunication products & equipments:» Ultra low capacitance to
SMA Connector Series
Connector Series able of Contents Connector Series(DC~27GHz)... 1 Replaceable Connectors... 2 Receptacle (Round Contact) Connectors... 8 Receptacle (Exposed eflon) Connectors... 15 Receptacle (Blunt Post
Transient Voltage Suppressor
Transient Suppressor Features Glass passivated junction Low incremental surge resistance, excellent clamping capability Underwriters Laboratory Recognition under UL standard for safety 497B: Isolated Loop