No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor
|
|
|
- φώλος Σαμαράς
- 5 χρόνια πριν
- Προβολές:
Transcript
1 FEATURE Operating Temperature: -40 C ~ +125 C Storage Temperature: 15~28 C; Humidity < 80%RH Ceramic base provide high SRF Ultra-compact inductors provide high Q factors Low profile, high current are available Outstanding endurance from pull-up force, mechanical shock and pressure Tighter tolerance down to ± 2% PART NUMBERING SYSTEM SI W 0603 G 1R6 WL H (1) (2) (3) (4) (5) (6) (7) No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor (2) Type W W: Wire Wound A: Air Wound Coil B:Balun C: Common Mode Choke E: Ceramic Chip F:Ferrite Chip M: Multi-Layer O:Toroidal Coil T: Thin Film (3) Dimension 0603 Dimension Information Footprint information or Size Code (4) G G: ±2% C:±0.2nH, D:±0.5nH, J: ±5%, K: ±10% (5) 1R6 0R1: 0.1nH Three or four digits: 10R8:10.8nH, 151: 150nH (6) Package Code WL Package Information Thin Film Inductor package reference (7) Current H H: High Current Blank: Standard, Q: High Q DIMENSION STANDARD Unit: mm Type A (max) B (max) C (max) D (Ref.) E F G H I J Weight WL g WL g WL g WL g WL g HIGH CURRENT (H) / HIGH Q (Q) Type A (max) B (max) C (max) D (Ref.) E F G H I J WLH WLQ WLQ WLQ WLQ Page. 1
2 ELECTRICAL CHARACTERISTIC WL-0402 Standard Type Test Freq. Min Quality Min SRF DCR IDC 900MHz 1.7GHz L Q L Q SIW0402 1R0WL 1.0 K SIW0402 1R9WL 1.9 K SIW0402 2R0WL 2.0 K SIW0402 2R2WL 2.2 K SIW0402 2R4WL 2.4 K SIW0402 2R7WL 2.7 K SIW0402 3R3WL 3.3 K SIW0402 3R6WL 3.6 J,K SIW0402 3R9WL 3.9 J,K SIW0402 4R3WL 4.3 J,K SIW0402 4R7WL 4.7 J,K SIW0402 5R1WL 5.1 J,K SIW0402 5R6WL 5.6 J,K SIW0402 6R2WL 6.2 J,K SIW0402 6R8WL 6.8 J,K SIW0402 7R5WL 7.5 J,K SIW0402 8R2WL 8.2 J,K SIW0402 8R7WL 8.7 J,K SIW0402 9R0WL 9.0 J,K SIW0402 9R5WL 9.5 J,K SIW WL 10 G,J,K SIW WL 11 G,J,K SIW WL 12 G,J,K SIW WL 13 G,J,K SIW WL 15 G,J,K SIW WL 16 G,J,K SIW WL 18 G,J,K SIW WL 19 G,J,K SIW WL 20 G,J,K SIW WL 22 G,J,K SIW WL 23 G,J,K SIW WL 24 G,J,K SIW WL 27 G,J,K SIW WL 30 G,J,K SIW WL 33 G,J,K SIW WL 36 G,J,K SIW WL 39 G,J,K SIW WL 40 G,J,K SIW WL 43 G,J,K SIW WL 47 G,J,K SIW WL 51 G,J,K SIW WL 56 G,J,K Notes: 1. (: G: ±2%, J: ±5%, K: ±10%) Page. 2
3 WL-0402 Standard Type Test Freq. Min Quality Min SRF DCR IDC 900MHz 1.7GHz L Q L Q SIW WL 68 G,J,K SIW WL 82 G,J,K SIW WL 100 G,J,K SIW WL 120 G,J,K > Notes: 1. (: G: ±2%, J: ±5%, K: ±10%) WL-0603 Standard Type Test Freq. Min Quality Min SRF DCR IDC 900MHz 1.7GHz Color Code L Q L Q SIW0603 1R6WL 1.6 J,K Blue SIW0603 1R8WL 1.8 J,K Black SIW0603 2R2WL 2.2 J,K White SIW0603 2R3WL 2.3 J,K > Yellow SIW0603 3R3WL 3.3 G,J,K > Red SIW0603 3R6WL 3.6 G,J,K Violet SIW0603 3R9WL 3.9 G,J,K > Brown SIW0603 4R3WL 4.3 G,J,K Orange SIW0603 4R5WL 4.5 G,J,K Gray SIW0603 4R7WL 4.7 G,J,K Violet SIW0603 5R1WL 5.1 G,J,K Green SIW0603 5R6WL 5.6 G,J,K Yellow SIW0603 6R2WL 6.2 G,J,K Black SIW0603 6R3WL 6.3 G,J,K Black SIW0603 6R8WL 6.8 G,J,K Red SIW0603 7R5WL 7.5 G,J,K Brown SIW0603 8R2WL 8.2 G,J,K Green SIW0603 8R7WL 8.7 G,J,K Yellow SIW0603 9R1WL 9.1 G,J,K Black SIW0603 9R5WL 9.5 G,J,K Blue SIW WL 10 G,J,K Orange SIW WL 11 G,J,K Gray SIW WL 12 G,J,K Yellow SIW WL 15 G,J,K Green SIW WL 16 G,J,K White SIW WL 17 G,J,K Red SIW WL 18 G,J,K Blue Notes: 1. (: G: ±2%, J: ±5%, K: ±10%) Page. 3
4 WL0603 Standard Type Test Freq. Min Q Min SRF DCR IDC 900MHz 1.7GHz L Q L Q SIW WL 20 G,J,K Green SIW WL 22 G,J,K Violet SIW WL 23 G,J,K Orange SIW WL 24 G,J,K Black SIW WL 27 G,J,K Gray SIW WL 30 G,J,K Brown SIW WL 33 G,J,K White SIW WL 36 G,J,K Red SIW WL 39 G,J,K Black SIW WL 43 G,J,K Orange SIW WL 47 G,J,K Brown SIW WL 51 G,J,K Blue SIW WL 56 G,J,K Red SIW WL 62 G,J,K Gray SIW WL 68 G,J,K Orange SIW WL 72 G,J,K Yellow SIW WL 82 G,J,K Green SIW WL 91 G,J,K Brown SIW WL 100 G,J,K Blue SIW WL 110 G,J,K Violet SIW WL 120 G,J,K Gray SIW WL 130 G,J,K White SIW WL 140 G,J,K Blue SIW WL 150 G,J,K White SIW WL 160 G,J,K Yellow SIW WL 180 G,J,K Black SIW WL 220 G,J,K Brown SIW WL 260 G,J,K Violet SIW WL 270 G,J,K Red SIW WL 280 G,J,K Green SIW WL 300 G,J,K Orange SIW WL 330 G,J,K Blue SIW WL 390 G,J,K Yellow SIW WL 470 G,J,K White Notes: 1. (: G: ±2%, J: ±5%, K: ±10%) Color Code Page. 4
5 WL-0805 Standard Type L Freq. Min Quality DCR IDC Color Code SIW0805 2R7WL 2.7 J,K MHz Brown SIW0805 2R8WL 2.8 J,K MHz Gray SIW0805 3R0WL 3.0 J,K MHz White SIW0805 3R3WL 3.3 J,K MHz Black SIW0805 3R9WL 3.9 J,K MHz None SIW0805 4R7WL 4.7 J,K MHz None SIW0805 5R6WL 5.6 J,K MHz Orange SIW0805 6R2WL 6.2 J,K MHz Green SIW0805 6R8WL 6.8 J,K MHz Brown SIW0805 7R5WL 7.5 J,K MHz Green SIW0805 8R2WL 8.2 J,K MHz Red SIW0805 8R7WL 8.7 J,K MHz White SIW WL 10 G,J,K MHz Blue SIW WL 12 G,J,K MHz Orange SIW WL 15 G,J,K MHz Yellow SIW WL 18 G,J,K MHz Green SIW WL 20 G,J,K MHz None SIW WL 22 G,J,K MHz Blue SIW WL 24 G,J,K MHz Gray SIW WL 27 G,J,K MHz Violet SIW WL 30 G,J,K MHz None SIW WL 33 G,J,K MHz Gray SIW WL 36 G,J,K MHz Orange SIW WL 39 G,J,K MHz White SIW WL 43 G,J,K MHz Yellow SIW WL 47 G,J,K MHz Black SIW WL 56 G,J,K MHz Brown SIW WL 68 G,J,K MHz Red SIW WL 72 G,J,K MHz Green SIW WL 82 G,J,K MHz Orange SIW WL 91 G,J,K MHz Black SIW WL 100 G,J,K MHz Yellow SIW WL 110 G,J,K MHz Brown Notes: 1. (: G: ±2%, J: ±5%, K: ±10%) Page. 5
6 WL-0805 Standard Type L Freq. Min Quality DCR IDC Color Code SIW WL 120 G,J,K MHz Green SIW WL 150 G,J,K MHz Blue SIW WL 160 G,J,K MHz Red SIW WL 180 G,J,K MHz Violet SIW WL 200 G,J,K MHz Orange SIW WL 220 G,J,K MHz Gray SIW WL 240 G,J,K MHz Red SIW WL 250 G,J,K MHz Green SIW WL 270 G,J,K MHz White SIW WL 300 G,J,K MHz Yellow SIW WL 330 G,J,K MHz Black SIW WL 360 G,J,K MHz Green SIW WL 390 G,J,K MHz Brown SIW WL 430 G,J,K MHz Blue SIW WL 470 G,J,K MHz Red SIW WL 560 G,J,K 25 50MHz Orange SIW WL 600 G,J,K 25 50MHz White SIW WL 620 G,J,K 25 50MHz Yellow SIW WL 680 G,J,K 25 50MHz Green SIW WL 750 G,J,K 25 50MHz Blue SIW WL 820 G,J,K 25 50MHz Violet SIW WL 1000 G,J,K 25 50MHz Gray SIW WL 1200 G,J,K MHz White SIW WL 1500 G,J,K MHz Black SIW WL 1800 G,J,K MHz Brown SIW WL 2200 G,J,K MHz Red SIW WL 2700 G,J,K MHz Orange SIW WL 3300 G,J,K MHz Blue SIW WL 4700 G,J,K MHz Green Note: 1. (: G: ±2%, J: ±5%, K: ±10%) Page. 6
7 WL-1008 Standard Type L Freq. Min Quality DCR IDC Color Code SIW1008 4R7WL 4.7 J,K MHz None SIW1008 5R6WL *5.6 J,K MHz Black SIW WL *10 G,J,K MHz Brown SIW WL *12 G,J,K MHz Red SIW WL *15 G,J,K MHz Orange SIW WL *18 G,J,K MHz Yellow SIW WL *22 G,J,K MHz Green SIW WL 24 G,J,K MHz Blue SIW WL *27 G,J,K MHz Violet SIW WL 30 G,J,K MHz None SIW WL *33 G,J,K MHz Gray SIW WL 36 G,J,K MHz Orange SIW WL *39 G,J,K MHz White SIW WL *47 G,J,K MHz Black SIW WL *56 G,J,K MHz Brown SIW WL *62 G,J,K MHz Blue SIW WL *68 G,J,K MHz Red SIW WL 75 G,J,K MHz White SIW WL *82 G,J,K MHz Orange SIW WL 91 G,J,K MHz White SIW WL *100 G,J,K MHz Yellow SIW WL *120 G,J,K MHz Green SIW WL *150 G,J,K MHz Blue SIW WL *180 G,J,K MHz Violet SIW WL *220 G,J,K MHz Gray SIW WL *240 G,J,K MHz White SIW WL *270 G,J,K MHz Black SIW WL *300 G,J,K MHz Brown SIW WL *330 G,J,K MHz Red SIW WL *360 G,J,K MHz Orange SIW WL *390 G,J,K MHz Yellow SIW WL *430 G,J,K MHz Green SIW WL *470 G,J,K MHz Blue SIW WL *560 G,J,K MHz Violet SIW WL *620 G,J,K MHz Gray SIW WL *680 G,J,K MHz White SIW WL *750 G,J,K MHz Black SIW WL *820 G,J,K MHz Brown SIW WL *910 G,J,K 25 50MHz Red SIW WL *1000 G,J,K 25 50MHz Orange Notes: 1. (: G: ±2%, J: ±5%, K: ±10%) 2. * Test Methods / Instrument: Network / Spectrum Analyzer Page. 7
8 WL-1008 Standard Type Freq. L Min Quality DCR IDC Color Code SIW WL *1200 G,J,K MHz Yellow SIW WL *1500 G,J,K MHz Green SIW WL *1800 G,J,K MHz Blue SIW WL *2200 G,J,K MHz Violet SIW WL *2700 G,J,K MHz Gray SIW WL *3300 G,J,K MHz White SIW WL *3900 G,J,K MHz Black SIW WL *4700 G,J,K MHz Brown SIW WL 5600 G,J,K MHz Red SIW WL 6800 G,J,K MHz Orange SIW WL 8200 G,J,K MHz Yellow SIW WL G,J,K MHz Green SIW WL G,J,K MHz Blue SIW WL G,J,K MHz Violet Notes: 1. (: G: ±2%, J: ±5%, K: ±10%) 2. * Test Methods / Instrument: Network / Spectrum Analyzer Page. 8
9 WLS-1008 (S) HP4287, Standard Type L Freq. Quality min. SRF min. DCR max. IDC max. SIW WLS 10 G,J,K MHz SIW WLS 12 G,J,K MHz SIW WLS 18 G,J,K MHz SIW WLS 22 G,J,K MHz SIW WLS 27 G,J,K MHz SIW WLS 33 G,J,K MHz SIW WLS 39 G,J,K MHz SIW WLS 47 G,J,K MHz SIW WLS 56 G,J,K MHz SIW WLS 62 G,J,K MHz SIW WLS 68 G,J,K MHz SIW WLS 82 G,J,K MHz SIW WLS 100 G,J,K MHz SIW WLS 120 G,J,K MHz SIW WLS 150 G,J,K MHz SIW WLS 180 G,J,K MHz SIW WLS 220 G,J,K MHz SIW WLS 240 G,J,K MHz SIW WLS 270 G,J,K MHz SIW WLS 300 G,J,K MHz SIW WLS 330 G,J,K MHz SIW WLS 360 G,J,K MHz SIW WLS 390 G,J,K MHz SIW WLS 430 G,J,K MHz SIW WLS 470 G,J,K MHz SIW WLS 560 G,J,K MHz SIW WLS 620 G,J,K MHz SIW WLS 680 G,J,K MHz SIW WLS 750 G,J,K MHz SIW WLS 820 G,J,K MHz SIW WLS 1000 G,J,K 25 50MHz SIW WLS 1200 G,J,K MHz SIW WLS 1800 G,J,K MHz SIW WLS 2200 G,J,K MHz (: G: ±2%, J: ±5%, K: ±10%) Page. 9
10 WL1206 Standard Type L Freq. Min Quality DCR IDC SIW1206 6R8WL 6.8 J,K MHz SIW WL 10 J,K MHz SIW WL 12 J,K MHz SIW WL 15 J,K MHz SIW WL 18 J,K MHz SIW WL 22 J,K MHz SIW WL 24 J,K MHz SIW WL 27 G,J,K MHz SIW WL 33 G,J,K MHz SIW WL 39 G,J,K MHz SIW WL 47 G,J,K MHz SIW WL 56 G,J,K MHz SIW WL 62 G,J,K MHz SIW WL 68 G,J,K MHz SIW WL 82 G,J,K MHz SIW WL 91 G,J,K MHz SIW WL 100 G,J,K MHz SIW WL 120 G,J,K MHz SIW WL 150 G,J,K MHz SIW WL 180 G,J,K MHz SIW WL 220 G,J,K MHz SIW WL 270 G,J,K MHz SIW WL 300 G,J,K MHz SIW WL 330 G,J,K MHz SIW WL 360 G,J,K MHz SIW WL 390 G,J,K MHz SIW WL 470 G,J,K MHz SIW WL 560 G,J,K MHz SIW WL 620 G,J,K MHz SIW WL 680 G,J,K MHz SIW WL 750 G,J,K MHz SIW WL 820 G,J,K MHz SIW WL 910 G,J,K MHz SIW WL 1000 G,J,K MHz SIW WL 1200 G,J,K MHz (: G: ±2%, J: ±5%, K: ±10%) Page. 10
11 WLH-0603 (H) High Current Type L Freq. Min Quality DCR IDC Color Code SIW0603 1R6WLH 1.6 J,K None SIW0603 3R6WLH 3.6 J,K Brown SIW0603 3R9WLH 3.9 J,K Red SIW0603 6R8WLH 6.8 J,K Orange SIW0603 7R5WLH 7.5 J,K Yellow SIW0603 8R2WLH 8.2 J,K White SIW WLH 10 G,J,K Green SIW WLH 12 G,J,K Blue SIW WLH 15 G,J,K Violet SIW WLH 18 G,J,K Gray SIW WLH 22 G,J,K White SIW WLH 24 G,J,K None 1. (: G: ±2%, J: ±5%, K: ±10%) Page. 11
12 WLQ-0402 (Q) High Q Type L Freq. 900MHz Quality 1.7GHz DCR max. IDC max. SIW WLQ 1 C,D,J,K SIW WLQ 2 C,D,J,K SIW0402 2R2WLQ 2.2 C,D,J,K SIW0402 2R4WLQ 2.4 C,D,J,K SIW0402 2R7WLQ 2.7 C,D,J,K SIW0402 3R3WLQ 3.3 C,D,J,K SIW0402 3R6WLQ 3.6 C,D,J,K SIW0402 3R9WLQ 3.9 C,D,J,K SIW0402 4R3WLQ 4.3 D,J,K SIW0402 4R7WLQ 4.7 D,J,K SIW0402 5R1WLQ 5.1 G,J,K SIW0402 5R6WLQ 5.6 G,J,K SIW0402 6R2WLQ 6.2 G,J,K SIW0402 6R8WLQ 6.8 G,J,K SIW0402 7R5WLQ 7.5 G,J,K SIW0402 8R2WLQ 8.2 G,J,K SIW0402 8R7WLQ 8.7 G,J,K SIW WLQ 9 G,J,K SIW0402 9R5WLQ 9.5 G,J,K SIW WLQ 10 G,J,K SIW WLQ 11 G,J,K SIW WLQ 12 G,J,K SIW WLQ 13 G,J,K SIW WLQ 15 G,J,K SIW WLQ 16 G,J,K SIW WLQ 18 G,J,K SIW WLQ 19 G,J,K SIW WLQ 20 G,J,K SIW WLQ 21 G,J,K SIW WLQ 22 G,J,K SIW WLQ 23 G,J,K SIW WLQ 24 G,J,K SIW WLQ 25 G,J,K SIW WLQ 26 G,J,K SIW WLQ 27 G,J,K SIW WLQ 30 G,J,K SIW WLQ 33 G,J,K SIW WLQ 36 G,J,K (: C:±0.2nH, D:±0.5nH, G: ±2%, J: ±5%, K: ±10%) Page. 12
13 WL0402 (Q) High Q Type L Freq. 900MHz Quality 1.7GHz DCR max. SIW WLQ 37 G,J,K SIW WLQ 39 G,J,K SIW WLQ 40 G,J,K SIW WLQ 43 G,J,K SIW WLQ 47 G,J,K SIW WLQ 51 G,J,K (: C:±0.2nH, D:±0.5nH, G: ±2%, J: ±5%, K: ±10%) WL0603 (Q) High Q Type Inductanc e L Freq. Q typ at 250 SRF typ DCR max. IDC max. 900MHz IDC max. 1.7GHz L typ Q typ L Typ Q Typ SIW0603 1R8WLQ 1.8 ±5, ±10% SIW0603 2R2WLQ 2.2 ±5, ±10% SIW0603 3R3WLQ 3.3 ±5, ±10% SIW0603 3R6WLQ 3.6 ±2, ±5, ±10% SIW0603 3R9WLQ 3.9 ±2, ±5, ±10% SIW0603 4R3WLQ 4.3 ±2, ±5, ±10% SIW0603 4R7WLQ 4.7 ±2, ±5, ±10% SIW0603 5R1WLQ 5.1 ±2, ±5, ±10% SIW0603 5R6WLQ 5.6 ±2, ±5, ±10% SIW WLQ 6 ±2, ±5, ±10% SIW0603 6R8WLQ 6.8 ±2, ±5, ±10% SIW0603 7R2WLQ 7.2 ±2, ±5, ±10% SIW0603 7R5WLQ 7.5 ±2, ±5, ±10% SIW0603 8R2WLQ 8.2 ±2, ±5, ±10% SIW0603 8R7WLQ 8.7 ±2, ±5, ±10% SIW0603 9R1WLQ 9.1 ±2, ±5, ±10% SIW0603 9R5WLQ 9.5 ±2, ±5, ±10% SIW WLQ 10 ±2, ±5, ±10% SIW WLQ 11 ±2, ±5, ±10% SIW WLQ 12 ±2, ±5, ±10% SIW WLQ 15 ±2, ±5, ±10% SIW WLQ 16 ±2, ±5, ±10% SIW WLQ 18 ±2, ±5, ±10% SIW WLQ 22 ±2, ±5, ±10% SIW WLQ 23 ±2, ±5, ±10% SIW WLQ 24 ±2, ±5, ±10% (: G: ±2%, J: ±5%, K: ±10%) Page. 13
14 WL-0603 (Q) High Q Type L Freq. Typ. Q at 250 Typ. SRF DCR IDC 900MHz 1.7GHz L typ Q typ L Typ Q Typ SIW WLQ 27 G,J,K SIW WLQ 30 G,J,K SIW WLQ 33 G,J,K SIW WLQ 36 G,J,K SIW WLQ 39 G,J,K SIW WLQ 43 G,J,K SIW WLQ 47 G,J,K SIW WLQ 51 G,J,K SIW WLQ 56 G,J,K SIW WLQ 68 G,J,K SIW WLQ 72 G,J,K SIW WLQ 75 G,J,K SIW WLQ 82 G,J,K SIW WLQ 91 G,J,K SIW WLQ 100 G,J,K SIW WLQ 110 G,J,K SIW WLQ 120 G,J,K SIW WLQ 150 G,J,K SIW WLQ 180 G,J,K SIW WLQ 200 G,J,K SIW WLQ 210 G,J,K SIW WLQ 220 G,J,K SIW WLQ 250 G,J,K SIW WLQ 270 G,J,K SIW WLQ 300 G,J,K SIW WLQ 330 G,J,K SIW WLQ 360 G,J,K SIW WLQ 390 G,J,K (: G: ±2%, J: ±5%, K: ±10%) Page. 14
15 WL 0805(Q) High Q Type Freq. L Min Quality DCR IDC Color Code SIW0805 2R5WLQ 2.5 J,K MHz None SIW0805 5R6WLQ 5.6 J,K MHz Brown SIW0805 6R2WLQ 6.2 J,K MHz Red SIW0805 6R8WLQ 6.8 J,K MHz White SIW0805 8R2WLQ 8.2 J,K MHz Gray SIW WLQ 10 J,K MHz None SIW WLQ 12 J,K MHz Orange SIW WLQ 15 G,J,K MHz None SIW WLQ 16 G,J,K MHz Yellow SIW WLQ 18 G,J,K MHz Green SIW WLQ 20 G,J,K MHz Blue SIW WLQ 22 G,J,K MHz None SIW WLQ 27 G,J,K MHz Violet SIW WLQ 30 G,J,K MHz Gray SIW WLQ 39 G,J,K MHz White SIW WLQ 48 G,J,K MHz None SIW WLQ 51 G,J,K MHz Brown 1. (: G: ±2%, J: ±5%, K: ±10%) WL1008 (Q) High Q Type Freq. L Min Quality DCR IDC SIW WLQ 3 J,K MHz SIW1008 3R9WLQ 3.9 J,K MHz SIW1008 4R1WLQ 4.1 J,K MHz SIW1008 7R8WLQ 7.8 J,K MHz SIW WLQ 10 G,J,K MHz SIW WLQ 12 G,J,K MHz SIW WLQ 18 G,J,K MHz SIW WLQ 22 G,J,K MHz SIW WLQ 33 G,J,K MHz SIW WLQ 39 G,J,K MHz SIW WLQ 47 G,J,K MHz SIW WLQ 56 G,J,K MHz SIW WLQ 68 G,J,K MHz SIW WLQ 82 G,J,K MHz SIW WLQ 100 G,J,K MHz Parts (3.0nH, 7.8nH) are wound on a low profile bobbin. ( ) 2. (: G: ±2%, J: ±5%, K: ±10%) Page. 15
16 RELIABILITY TEST CONDITON AND REQUIREMENT Item Test Conditions / Equipment Requirement HP4286/E4982A Refer to spec Q HP4286/E4982A Refer to spec SRF HP4286/E4982A Refer to spec DC Resistance Micro-Ohm meter (Gom-801G)/E4982A Refer to spec Rated Current IDC Overload Withstanding Voltage Applied the current to coils, the temperature of coil increases ΔT15 C (Ta=25 C ). Applied 2 times of rated allowed DC current to inductor for a period of 5 minutes AC voltage of 500 VAC applied between inductors terminal and case for 1 min. Refer to spec Insulation Resistance 100 VDC applied between inductor terminal and case 1000M ohm min. Vibration Resistance to Soldering Heat Component Adhesion (Push Test) Drop Solderability Test device shall be soldered on the substrate Oscillation Frequency: 10 to 55 to 10Hz for 1 min. Amplitude: 1.5 mm Time: 2 hrs for each axis (X, Y &Z), total 6 hrs Solder Temperature: 260±5 C Immersion Time: 10±2 seconds The device should be soldered (260±5 for 10 seconds) to a tinned copper subs rate. A dynamiter force gauge should be applied to the side of the component. The device must with stand a minimum force of 2 or 4 pounds without a failure of adhesion on termination Dropping chip by each side and each corner. Drop 10 times in total Drop height: 100 cm Drop weight: 125 g Inductor shall be dipped in a melted solder bath at 245±5 for 3 seconds Inductors shall show no evidence of electrical and mechanical damage Inductors shall show no evidence of electrical and mechanical damage Appearance: no damage L change: within ±5% Q change: within ±10% Appearance: no damage L change: within ±5% Q change: within ±10% 1 lb. For lbs. For lbs. For the rest No damage 90% covered with solder Resistance to Solvent MIL-STD-202, Method 215 No damage on appearance and marking Temperature Characteristic Humidity Low Temperature Storage Thermal Shock High Temperature Storage High Temperature Load Life Damp Heat with Load -40~+125 C Temperature: 40±2 C Relative Humidity: 90~95% Time: 96±2 hrs Measured Temperature: after -40±2 C exposure in the room condition for 2 hrs Time: 96±2 hrs Inductors are tested after 1 hour at room temperature One cycle Step Temperature ( C) Time (min.) 1-25± ± ± ±2 15 Total of 5 cycles Temperature: 125±2 C Time: 96±2 hrs Measured after exposure in the room condition for 1hour Temperature: 85±2 C Time: 1000±12 hrs Load: Allowed DC current Temperature: 40±2 C Relative Humidity: 90~95% Time: 1000±12 hrs Load: Allowed DC current Appearance: no damage L change: within ±10% Q change: within ±20% Appearance: no damage L change: within ±10% Q change: within ±20% Appearance: no damage L change: within ±10% Q change: within ±20% Appearance: no damage L change: within ±10% Q change: within ±20% Appearance: no damage L change: within ±10% Q change: within ±20% There should be no evidence of short or open circuit. There should be no evidence of short or open circuit. Page. 16
17 RECOMMENDED SOLDERING PROFILES Pre Heat Reflow Condition Temp. Min T s(min) 150 C Tempe. T s(max) 180 C Time (min. to max.) (t s ) Average ramp up rate (Liquidus Temperature) (T A ) to peak T s(max) to T A (Ramp-up rate) Reflow Temp. (T A ) (Liquidus) 217 C Time (min. to max.) (t s ) seconds 3 C/second max. 3 C/second max seconds Peak Temperature (T P ) 260 +/-0.5 C Time within 5 C of actual peak Temperature (t p ) 10 seconds Ramp-down Rate 6 C/second max. Time 25 C to peak Temp. (T P ) Number of Reflow cycles allowed 8 minutes max. 3 times PACKAGING SPECIFICATION Reel Specification PAPER TAPE EMBOSSED PLASTIC TAPE Size Paper Tape Dimension (mm) A B H F P P 0 P 1 W Reel (EA) , ,000 Size Embossed Plastic Tape Dimension (mm) A B C D E F G H J Reel (EA) , (H) , , , (H) ,000 Page. 17
SMD Wire Wound Chip Inductor
Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors -ow profile, high current are available
SMD Wire Wound Chip Inductor
Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors -ow profile, high current are available
Feature. shock and pressure. -Tighter tolerance down to ±2% -Smaller size of 0402 (1005) -CATV Filter, Tuner. -Cable Modem/ XDSL Tuner.
Wire Wound Chip Inductor-WL Series Feature -Wire wound ceramic construction provide high SRF -Ultra-compact inductors provide exceptional Q values -Low profile, high current are available -Miniature SMD
No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor
PART NUMBERING SYSTEM SI F 0805 K 780 F (1) (2) (3) (4) (5) (6) No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor (2) Type F Ferrite
HIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
WIRE-WOUND CHIP INDUCTOR FERRITE/OPENTYPE
WIRE-WOUND CHIP INDUCTOR FERRITE/OPENTYPE 0805CS (2012) Ferrite Series (0.12~33µH) Part Number Inductance µh Percent Tolerance Q Min SRF Min MHz RDC Max Ohms IDC Max ma Color Code 0805CS-121E_FS 0.12@
No Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
High Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
Multilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Fixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Fixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Power Inductor LVS Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering LVS 6645 L - 1R M - AU Series Name Dimensions Code Inductance Internal Code (mm) (uh) Tolerance 4412 4.x4.x1.2 L Low DCR R47.47 M ±% 4418 4.x4.x1.8
Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Data sheet Thin Film Chip Inductor AL Series
Data sheet Thin Film Chip Inductor AL Series Scope - 0201 and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and
Multilayer Chip Inductor / CL TYPE
Multilayer Chip Inductor / CL TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no lead
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. PRODUCT DETAIL Electrical Characteristics μh L (Min) Q MHz (Min) SRF Ω DCR IDC ma TEST FREQ: MHz TEST LEVEL: 100 mv Test Instruments HP4291
Metal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Metal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
SMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
Anti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
Thin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
Metal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication
Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. FEATURES The monolithic construction performs high reliability and ensures a closed magnetic flux in a component avoids magnetic and interference
THICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat (Epoxy)
ARN series Thin Film High Precision Chip Resistor Features» Advanced thin film technology» Very tight tolerance down to ±0.01%» Extremely low TCR down to ±5ppm/» Wide resistance range 1ohm-3Mega ohm» Miniature
Carbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
RC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
Metal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
WLCW1005 SMD Wire Wound Ceramic Chip Inductors
WCW1005 SMD Wire Wound Ceramic Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WCW1005 Series_V5.0 Mar. 2016 Features 1. Standard chip size bobbin with
CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Thin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to ±5PPM/C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
Thin Film Chip Inductor
Scope -Calchip s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Calchip s design provides high, excellent Q, and superior temperature stability. This highly
Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Chilisin Electronics Singapore Pte Ltd
hilisin Electronics ingapore Pte Ltd High urrent hip Beads, PBY eries Feature: Our MD High urrent hips Beads is specially designed to with tand large urrents while providing a means of EMI/RFI attenuation
Thin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to PPM/ C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
Surface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
SMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008
SMD Wire Wound Ferrite Chip Inductors - LS Series LS Series LS Series is the newest in open type ferrite wire wound chip inductors. The wire wound ferrite construction supports higher SRF, lower DCR and
Unshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
Thin Film Precision Chip Resistor-AR Series
hin Film Precision Chip Resistor-AR Series Construction L D1 3 4 5 6 D2 9 8 7 1 2 1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat
YJM-L Series Chip Varistor
Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
Metal Film Flame-Proof Resistors
Features -Low Noise -Low TCR from ±15~100PPM/ -High Precision from ±0.1%~1% -Complete Flameproof Construction UL-1412. -Coating meets UL94V-0 Applications -Telecommunication -Medical Equipment -Consumer
Metal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
LR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
SMD Wire Wound Ferrite Chip Inductors - SQC Series. SQC Series. Product Identification. Shapes and Dimensions
SMD Wire Wound Ferrite Chip Inductors - SQC Series SQC Series These miniature chip inductors, SQC Series, wound on a special ferrite core and are excellent to be used as choke coil in DC power supply circuits.
MAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
Low Profile Inductors. Assembly Inductors
Content Low Profile Inductors Ordering Code...... 2 Product Range... 3 Molding Inductors (CPCMD Series)... 4 Standard External Dimensions... 4 Part Numbers & Characteristics... 6 Coating Inductors (CPCFN/H
SPM R2 M P S A. Inductors-SPM. Ordering Code
Ordering Code Inductors-SPM SPM 2520 2R2 M P S A Product Code: SPM: Molding Inductor SPN : Coating Inductor(Normal) SPH :Coating Inductor(High ) Dimension (L X W): mm Code Dimension Code Dimension 1210
LR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
AL Series - Thin Film Chip Inductor
Features A Photo Lithographic Single Layer Ceramic Chip High SRF, Excellent, Superior Temperature Stability Tight Tolerance of ± % or ±.nh Self Resonant Frequency Controlled within % Stable Inductance
Applications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
Thick Film Array Chip Resistor
CN Series Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Reduction of assembly costs and
NTC Thermistor:SCK Series
Features. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φmm:-40~+70
Polymer PTC Resettable Fuse: KMC Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. IA size: 0603, 0805, 1206, 1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small
Surface Mount Multilayer Inductor
FETURES 0603, 0805, 0806 ND 1008 CSE SIZES HIGH CURRENT ND LOW RESISTNCE NEW "S" VERSION FOR INCRESED STURTION CURRENT UGRDED "H" VERSION FOR HIGHEST CURRENT REFLOW SOLDERING LICBLE CKGE FOR UTOMTIC ICKLCE
NTC Thermistor:SCK Series
Features. RoHS & HF compliant 2. Body size: Ф5mm ~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70
LR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
NTIC Series. Limiting Inrush Current. NTC Power Thermistor for FEATURES PART NUMBER SYSTEM UL E Ф5~Ф15mm NTIC M S.
FEATURES UL E223037 Body size: Ф5mm ~ Ф30mm Radial lead resin coated High power rating Wide resistance range Cost effective Operating temperature range: Ф5mm: -40ºC~150ºC Ф8~Ф10mm: -40ºC~170ºC Ф13~Ф30mm:
Current Sense Metal Strip Resistors (CSMS Series)
Features: Range: 1mΩ to 100mΩ Low TCR as low as 75PPM High power rating Custom Values available RoHS Compliant and Halogen Free Operating Temperature: -55 C to +170 C Part Number Structure CSMS 0805 -
Table of contents INDEX
Table of contents INDEX Quick Product Information... 2 Part Number Explanation and Coding Rule... 3 Wire Wound Ceramic Chip Inductors WLCW1005 Series... 4 Wire Wound Ceramic Chip Inductors WLCW1608 Series...
NTC Thermistor:TSM type
Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended
Thick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MW) THICK FILM ON ALUMINA SUSTRATE,
SMD - Resistors. Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612 official distributor of 1. Scope Thick Film Chip Resistor-SMDC Series -This specification applies
THICK FILM CHIP RESISTOR" CAL-CHIP ELECTRONICS INC."
THICK FILM CHIP RESISTOR CAL-CHIP ELECTRONICS INC. CAL-CHIP SERIES: RM SERIES 1 2 3 INTRODUCTION SCOPE Applies to all sizes of rectangular-type fixed chip resistors with Ruthenium base as material. FEATURES
YAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.
YAGEO CORPORATION SMD INDUCTOR / BEADS CLH Series Multilayer Chip Inductors High Frequency Lead-free / For High Frequency Applications APPLICATIONS RF Resonance and Impedance Matching Circuit RF and Wireless
Metal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
SPN R2 M P S A. Inductors-SPH/SPN. Ordering Code
Inductors-SPH/SPN Ordering Code SPN 2520 2R2 M P S A Product Code: SPM: Molding Inductor SPN : Coating Inductor(Normal) SPH :Coating Inductor(High ) Dimension (L X W): mm Code Dimension Code Dimension
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
NTC Thermistor:TTC3 Series
Features. RoHS compliant 2. Halogen-Free(HF) series are available 3. Body size: Ф3mm 4. Radial lead resin coated 5. Operating temperature range: -40 ~+25 6. Wide resistance range 7. Cost effective 8. Agency
DC-DC Constant Current Step-Down LED driver LDD-300L LDD-350L LDD-500L LDD-600L LDD-700L CURRENT RANGE
SPECIFICATION ORDER NO. LDD-00L LDD-0L LDD-00L LDD-00L LDD-700L CURRENT RANGE 00mA 0mA 00mA VOLTAGE RANGE Note. ~ VDC for LDD-00~700L/LW ; ~ 8VDC for LDD-00~700LS CURRENT ACCURACY (Typ.) ±% at VDC input
Current Sensing Chip Resistor
Features -3 atts power rating in 1 att size, 1225 package -Low CR of ±100 PPM/ C -Resistance values from 1m to 1 ohm -High purity alumina substrate for high power dissipation -Long side terminations with
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512 official distributor of Thick Film Chip Resistor-SMDC Series 1. Scope -This specification applies to all
Low Resistance Flat Chip Resistors Type SR73
Low Resistance Flat Chip Resistors Type SR73 1. Scope This specification applies to chip resistors (SR73) produced by KOA Corporation. AHA 11/11/01 CERTIFIED 2. Type Designation The type designation shall
Polymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
NTC Thermistor:SCK Series
Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:
SMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)
Marking Outline: Low DCR, high rated current. Magnetic shielded structure Lead free product, RoHS compliant. RoHS Carrier tape packing, suitable for SMT process. SMT Widely used in buck converter, laptop,
Ceramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Coating Inductors (SPS/SPH/SPN Series)
Coating Inductors (SPS/SPH/SPN Series) Feature 1. Small and low profile inductor 2. It corresponds to high current 3. Simple and original magnetic shield structure Product Range Application For small DC/DC
Thin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) RoHS Compliant includes all homogeneous
SAW FILTER - RF RF SAW FILTER
FEATURES - Frequencies from 0MHz to 700MHz - Custom specifications available - Industry standard package configurations - Low-loss saw component - Low amplitude ripple - RoHS compliance - Electrostatic
Thin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) Type EI Size Power Rating at 70
WIRE WOUND CHIP INDUCTORS
FEATURES High Self-Resonance Frequency Stable inductance at high frequency Tight inductance tolerance High Q factory High current Low DCR APPLICATIONS Antenna amplifiers Mobile phone Key entry GPS (Global
DC-DC Constant Current Step-Down LED driver LDD-300L LDD-350L LDD-500L LDD-600L LDD-700L CURRENT RANGE
SPECIFICATION ORDER NO. LDD-00L LDD-0L LDD-00L LDD-00L LDD-700L CURRENT RANGE 00mA 0mA 00mA 00mA VOLTAGE RANGE Note. ~ VDC for LDD-00~700L/LW ; ~ 8VDC for LDD-00~700LS CURRENT ACCURACY (Typ.) ±% at VDC
NTC Thermistor:SCK Series
Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:
Accu-Guard II. SMD Thin-Film Fuse ELECTRICAL SPECIFICATIONS
Accu-Guard II is a version of Accu-Guard fuses for a wider range of current and voltage ratings. Con struct ed on alumina substrates, Accu-Guard II fuses display superior electrical, mechanical and en
NTC thermistors for temperature measurement
NTC thermistors for temperature measurement SMD NTC thermistors with nickel barrier termination, case size 0603 Series/Type: Date: June 2008 EPCOS AG 2008. Reproduction, publication and dissemination of
Polymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
SPECIFICATION FOR APPROVAL
信昌電子陶瓷股份有限公司 Prosperity Dielectrics Co., Ltd. No. 148, Chang-An Road, Sec 1,Lu-Tsu Shiang, Taoyuan, Taiwan, ROC. Tel.:886-3-3224471 Fax:886-3-3212216 SPECIFICATION FOR APPROVAL DATE: CUSTOMER: LIMITED
SPECIFICATION FOR APPROVAL
信昌電子陶瓷股份有限公司 Prosperity Dielectrics Co., Ltd. No. 148, Chang-An Road, Sec 1,Lu-Tsu Shiang, Taoyuan, Taiwan, ROC. Tel.:886-3-3224471 Fax:886-3-3212216 SPECIFICATION FOR APPROVAL DATE: CUSTOMER: LIMITED
CSKA series. Current Sensing Chip Resistor Automotive. Features. Applications. Construction FAITHFUL LINK
CSKA series Current Sensing Chip Resistor Automotive Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate
Thick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MΩ) THICK FILM ON ALUMINA SUSTRATE,
Data Sheet. Customer: Current Sensing Thick Film Chip Resistor - RS Series Size: 0402/0603/0805/1206/1210/2010/2512. Accepted by (QC) Approved by
Data Sheet Customer: Product: Current Sensing Thick Film Chip Resistor - RS Series Size: 0402/0603/0805/1206/1210/2010/2512 Issued Date: 01-Jun-10 Edition: REV.A5 Produced by Checked Approved by Prepared
MCB and MHC Series Chip Ferrite Bead for Automotive Applications Qualified based on AEC-Q200
RoHS MC and MHC Series Chip Ferrite ead for Automotive Applications Qualified based on AEC-Q200 Explanation of Part Number MC 1608 W 12 1 H P - 1 2 3 4 5 6 7 8 9 1. Series Name 2. Size Code: the first
NTC Thermistor:SCK Series
NTC Thermistor:SCK Series Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES) (8) 95-8365 venkel.com Features: RoHS Compliant and Halogen Free Good Q values High SRF range: 1nH to 47uH Tolerance: ±.2nH, ±.3nH, ±2%, ±5%, ±1% High