Visible Light-Driven Oxidative Coupling Reactions of Amines. by Photoactive WS2 Nanosheets

Σχετικά έγγραφα
Supporting Information. Experimental section

A facile and general route to 3-((trifluoromethyl)thio)benzofurans and 3-((trifluoromethyl)thio)benzothiophenes

Metal-free Oxidative Coupling of Amines with Sodium Sulfinates: A Mild Access to Sulfonamides

Copper-Catalyzed Oxidative Dehydrogenative N-N Bond. Formation for the Synthesis of N,N -Diarylindazol-3-ones

Synthesis of Imines from Amines in Aliphatic Alcohols on Pd/ZrO 2 Catalyst at Ambient Conditions

The Free Internet Journal for Organic Chemistry

Direct Transformation of Ethylarenes into Primary Aromatic Amides with N-Bromosuccinimide and I 2 -aq NH 3

Supporting Information

Copper-catalyzed formal O-H insertion reaction of α-diazo-1,3-dicarb- onyl compounds to carboxylic acids with the assistance of isocyanide

Supporting Information

Supporting Information

Supporting Information. Experimental section

Iodine-catalyzed synthesis of sulfur-bridged enaminones and chromones via double C(sp 2 )-H thiolation

Supporting Information

Supporting Information

Supporting Information

ESI for. A simple and efficient protocol for the palladium-catalyzed. ligand-free Suzuki reaction at room temperature in aqueous DMF.

Supporting Information

Tributylphosphine-Catalyzed Cycloaddition of Aziridines with Carbon Disulfide and Isothiocyanate

Electronic Supplementary Information

Room Temperature Highly Diastereoselective Zn-Mediated. Allylation of Chiral N-tert-Butanesulfinyl Imines: Remarkable Reaction Condition Controlled

Highly enantioselective cascade synthesis of spiropyrazolones. Supporting Information. NMR spectra and HPLC traces

Supporting Information

Divergent synthesis of various iminocyclitols from D-ribose

and Selective Allylic Reduction of Allylic Alcohols and Their Derivatives with Benzyl Alcohol

Hiyama Cross-Coupling of Chloro-, Fluoroand Methoxy- pyridyl trimethylsilanes : Room-temperature Novel Access to Functional Bi(het)aryl

Facile construction of the functionalized 4H-chromene via tandem. benzylation and cyclization. Jinmin Fan and Zhiyong Wang*

9-amino-(9-deoxy)cinchona alkaloids-derived novel chiral phase-transfer catalysts

Supporting Information for

Supporting information

Ferric(III) Chloride Catalyzed Halogenation Reaction of Alcohols and Carboxylic Acids using - Dichlorodiphenylmethane

Supporting Information for Iron-catalyzed decarboxylative alkenylation of cycloalkanes with arylvinylic carboxylic acids via a radical process

Electronic Supplementary Information (ESI)

Free Radical Initiated Coupling Reaction of Alcohols and. Alkynes: not C-O but C-C Bond Formation. Context. General information 2. Typical procedure 2

Supporting Information One-Pot Approach to Chiral Chromenes via Enantioselective Organocatalytic Domino Oxa-Michael-Aldol Reaction

Electronic Supplementary Information

Lewis Acid Catalyzed Propargylation of Arenes with O-Propargyl Trichloroacetimidate: Synthesis of 1,3-Diarylpropynes

Supporting Information

Eco-friendly synthesis of diverse and valuable 2-pyridones by catalyst- and solvent-free thermal multicomponent domino reaction

Efficient and Simple Zinc mediated Synthesis of 3 Amidoindoles

Supporting Information. Consecutive hydrazino-ugi-azide reactions: synthesis of acylhydrazines bearing 1,5- disubstituted tetrazoles

Supporting Information

Fast copper-, ligand- and solvent-free Sonogashira coupling in a ball mill

Direct Palladium-Catalyzed Arylations of Aryl Bromides. with 2/9-Substituted Pyrimido[5,4-b]indolizines

Vilsmeier Haack reagent-promoted formyloxylation of α-chloro-narylacetamides

Supporting Information for

Supporting information

Mandelamide-Zinc Catalyzed Alkyne Addition to Heteroaromatic Aldehydes

Regioselectivity in the Stille coupling reactions of 3,5- dibromo-2-pyrone.

Phosphorus Oxychloride as an Efficient Coupling Reagent for the Synthesis of Ester, Amide and Peptide under Mild Conditions

Copper-promoted hydration and annulation of 2-fluorophenylacetylene derivatives: from alkynes to benzo[b]furans and benzo[b]thiophenes

Sequential catalysis for the production of sterically hindered amines: Ruthenium(II)-catalyzed C-H bond activation and hydrosilylation of imines

Site-Selective Suzuki-Miyaura Cross-Coupling Reactions of 2,3,4,5-Tetrabromofuran

Rh(III)-Catalyzed C-H Amidation with N-hydroxycarbamates: A. new Entry to N-Carbamate Protected Arylamines

Sotto, 8; Perugia, Italia. Fax: ; Tel: ;

Supporting Information

Supporting Information

gem-dichloroalkenes for the Construction of 3-Arylchromones

Supporting Information

Catalyst-free transformation of levulinic acid into pyrrolidinones with formic acid

Zuxiao Zhang, Xiaojun Tang and William R. Dolbier, Jr.* Department of Chemistry, University of Florida, Gainesville, FL

Fluorinative Ring-opening of Cyclopropanes by Hypervalent Iodine Reagents. An Efficient Method for 1,3- Oxyfluorination and 1,3-Difluorination

Rhodium-Catalyzed Oxidative Decarbonylative Heck-type Coupling of Aromatic Aldehydes with Terminal Alkenes

Electronic Supplementary information

Supplementary information

Supporting Information. Asymmetric Binary-acid Catalysis with Chiral. Phosphoric Acid and MgF 2 : Catalytic

SUPPORTING INFORMATION

Supplementary Figure S1. Single X-ray structure 3a at probability ellipsoids of 20%.

Kishore Natte, Jianbin Chen, Helfried Neumann, Matthias Beller, and Xiao-Feng Wu*

Supplement: Intramolecular N to N acyl migration in conformationally mobile 1 -acyl-1- systems promoted by debenzylation conditions (HCOONH 4

Supplementary Material

First DMAP-mediated direct conversion of Morita Baylis. Hillman alcohols into γ-ketoallylphosphonates: Synthesis of

Enantioselective Organocatalytic Michael Addition of Isorhodanines. to α, β-unsaturated Aldehydes

Supporting Information

Novel and Selective Palladium-Catalyzed Annulation of 2-Alkynylphenols to Form 2-Substituted 3-Halobenzo[b]furans. Supporting Information

Protease-catalysed Direct Asymmetric Mannich Reaction in Organic Solvent

Aerobic cross-dehydrogenative coupling of terminal alkynes and tertiary amines by a combined catalyst of Zn 2+ and OMS- 2

A straightforward metal-free synthesis of 2-substituted thiazolines in air

Supplementary Information

Heterobimetallic Pd-Sn Catalysis: Michael Addition. Reaction with C-, N-, O-, S- Nucleophiles and In-situ. Diagnostics

Supporting Information

Supporting Information

Supporting Information

Peptidomimetics as Protein Arginine Deiminase 4 (PAD4) Inhibitors

Supporting Information

The N,S-Bidentate Ligand Assisted Pd-Catalyzed C(sp 2 )-H. Carbonylation using Langlois Reagent as CO Source. Supporting Information.

Aqueous MW eco-friendly protocol for amino group protection.

Experimental procedure

Supporting Information

Supporting Information

Bishwajit Saikia*, Preeti Rekha Boruah, Abdul Aziz Ali and Diganta Sarma. Contents

Supporting Information for Synthesis of Fused N-Heterocycles via Tandem C-H Activation

Supporting Information. for

Pyrrolo[2,3-d:5,4-d']bisthiazoles: Alternate Synthetic Routes and a Comparative Study to Analogous Fused-ring Bithiophenes

Supporting Information. Copyright Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, 2006

Supporting Information

Supporting Information for Fe-Catalyzed Reductive Coupling of Unactivated Alkenes with. β-nitroalkenes. Contents. 1. General Information S2

Aminofluorination of Fluorinated Alkenes

Supporting Information

multicomponent synthesis of 5-amino-4-

Transcript:

Supporting Information Visible Light-Driven Oxidative Coupling Reactions of Amines by Photoactive WS2 anosheets Faizan Raza, Jung Hyun Park, Hye-Rim Lee, Hye-In Kim, Su-Ji Jeon and Jong-Ho Kim* Department of Chemical Engineering, Hanyang University, Ansan 426-791, Republic of Korea * To whom correspondence should be addressed: kjh75@hanyang.ac.kr S1

Contents of Supporting Information: 1. Materials ----------------------------------------------------------------------------------------------S3 2. Instrumentation --------------------------------------------------------------------------------------S3 3. PL response of WS2 nanosheets to benzylamine ------------------------------------------------S4 4. GC. Analysis -----------------------------------------------------------------------------------------S4 5. General procedure for synthesis of imine products as GC standards -------------------------S4 6. Supplementary figures and tables -----------------------------------------------------------------S5 Figure S1 ----------------------------------------------------------------------------------------------S5 Figure S2 ----------------------------------------------------------------------------------------------S6 Figure S3 ----------------------------------------------------------------------------------------------S7 Figure S4 ----------------------------------------------------------------------------------------------S8 Figure S5 ----------------------------------------------------------------------------------------------S9 Table S1 -----------------------------------------------------------------------------------------------S10 Figure S6 ----------------------------------------------------------------------------------------------S10 7. Characterization of pure imines products---------------------------------------------------------s11 S2

1. Materials All reagents and solvents used were obtained commercially and used without further purification. Tungsten (IV) sulfide (WS2), bromobenzene, benzyl amine, all primary, secondary and aliphatic amines were purchased from Sigma-Aldrich (St. Louis, MO, USA) and Tokyo Chemical Industry Co., LTD. (Tokyo, Japan). -Methyl-2-pyrrolidone (MP), acetonitrile (CH3C) and diethyl ether ((C2H5)2O) were purchased from Dae-Jung Chemicals (Busan, Republic of Korea). 2. Instrumentation The morphology and size of WS2 nanosheets were characterized by transmission electron microscope (TEM, JEOL-2100F) and atomic force microscope (AFM, XE-100, Park systems, Korea). Raman spectra were measured by Raman Microscope (REISHAW, RM-100) at laser excitation of 514.5 nm. The UV/Vis absorption spectra of WS2 were measured using a UV/Vis spectrometer (UV-2600, Shimadzu, Japan). The photoluminescence spectra were obtained by a spectrofluorometer (ano Log, Horiba Scientific, Tokyo, Japan). The amount of catalyst was quantified by inductive coupled plasma-atomic emission spectroscopy (ICP-AES, SPECTRO, SPECTRO ARCOS). The 1 H and 13 C nuclear magnetic resonance (MR) spectra of the reaction mixture were recorded by a 400 MHz spectrometer (BRUKER Bio Spin AG, Bruker model digital ADVACE III 400). The IR analysis of imines was analyzed by fourier transform-infra red spectrocopy (Smart itr TM, Thermo Scientific). S3

3. PL response of WS2 nanosheets to benzylamine PL response of WS2 nanosheets to benzylamine at various concentrations from 0.05 to 0.9 mm was measured by using a spectrofluorometric. A 5.46 µl of benzylamine (0.05 mm) was added into a 1 ml portion of WS2/MP solution, which was then stirred vigorously for 5 min at 25 o C. The PL spectrum of the resulting solution was taken at an excitation of 380 nm with an exposure time of 0.1 sec. 4. GC analysis GC analysis was done by YL Instrument 6500GC equipped with FID detector and a HP-5 capillary column (5%-Phenyl-methylpolysiloxane, 30 m, 0.320 mm x 0.25 µm, Agilent) using argon as a carried gas. Standard analysis condition: oven temperature 100 C, injector temperature 280 C, FID detector temperature 300 C, column temperature program 10 C/min, final temperature 280 C (holding for 3 min). 5. General procedure for synthesis of imine products for calibration curves All imine products as GC standards were readily synthesized via condensation of aldehydes and amines. 1 For -benzylidene benzylamine, 5 mmol of benzylamine, 5 mmol of benzaldehyde, and 0.5 mg of anhydrous MgSO4 were added into 5 ml of CH2Cl2, and then the resulting mixture was stirred at room temperature for 5 h. After filtering out solid MgSO4, the solvent was vaporized by using a rotary evaporator. Unreacted benzealdehyde and benzylamine were further removed under vacuum at 60 C. Other imine products were also obtained in the same way. S4

6. Supplementary Figures and Tables Figure S1. Photos of an experimental set-up for photocatalysis. a) Before, and b) After visible light irradiation. S5

Figure S2. a) TEM image, b) fluorescence spectra and c) UV-Vis absorption of bulk WS2. S6

Figure S3. XPS spectra of 2H-WS2 anosheets: (a) W4f spectrum, showing strong peaks of W4f7/2 and W4f5/2 at 32.4 and 34.55 ev, respectively, and a weak peak of W5p3/2 at 37.9 ev. (b) S2p spectrum, showing two peaks of S2p3/2 and S2p1/3 at 161.9 and 163.2 ev. 2 S7

Figure S4. PL response of WS2 nanosheets to benzylamine at various concentrations, showing that the WS2 PL was gradually quenched by benzylamine as its concentration increased. S8

Figure S5. 1 H MR spectrum of the reaction mixture for the oxidative coupling reaction of benzylamine photocatalyzed by WS2 nanosheets, showing the peak of H2O2 (10.95 ppm) formed as a byproduct during the reaction. S9

Table S1. Recovered amount of WS2 nanosheets after each round of oxidative coupling reaction of benzylamine Cycles Initial amount 1 st 2 nd 3 rd 4 th Amount recovered after each cycle 1.2 mg 0.795 mg 0.536 mg 0.415 mg 0.482 mg Figure S6. TEM images of WS 2 nanosheets (a) before and (b) after recycling them five times in the oxidative coupling of benzylamine. S10

7. Characterization of pure imine products -Benzylidine-p-benzylamine: (Yellow liquid, GC RT: 11.29 min); 1 H MR (400 MHz, CDCl3): δ = 8.35 (s, 1H), 7.79 7.74 (m, 2H), 7.39 (d, J = 2.2 Hz, 3H), 7.32 (d, J = 4.4 Hz, 4H), 7.24 (s, 1H), 4.80 (d, J = 1.3 Hz, 2H) ppm; 13 C MR (101 MHz, CDCl3): δ = 162.09, 139.40, 136.25, 130.88, 128.72, 128.61, 128.39, 128.09, 127.10, 65.16 ppm; FT-IR: ν = 3027/3085, 2840/2872/2732, 1643, 1580 cm -1. -(4-Methylbenzylidine)-p-methylbenzylamine: (Yellow solid, GC RT: 13.66 min); 1 H MR (400 MHz, CDCl3): δ = 8.30 (s, 1H), 7.65 (d, J = 8.4 Hz, 2H), 7.20 (d, J = 8.4, 2H), 7.18 (d, J = 8.0, 2H), 7.12 (d, J = 8.0 Hz, 2H), 4.74 (s, 2H), 2.34 (s, 3H), 2.31 (s, 3H) ppm; 13 C MR (101 MHz, CDCl3): δ =161.18, 141.06, 136.57, 136.45, 133.70, 129.41, 129.26, 128.37, 128.07, 64.87, 21.61, 21.22 ppm; FT-IR: ν = 3048/3022, 2913/2854/2732, 1638, 1571, 811, 794 cm -1. -(2-Methylbenzylidine)-o-methylbenzylamine: (Yellow liquid, GC RT: 13.29 min); 1 H MR (400 MHz, CDCl3): δ = 8.63 (s, 1H), 7.92 (dd, J = 7.6, 1.4 Hz, 1H), 7.32 7.10 (m, 7H), 4.80 (s, 2H), 2.47 (s, 3H), 2.37 (s, 3H) ppm; 13 C MR (101 MHz, CDCl3): δ = 160.66, 137.84, 137.73, 136.20, 134.34, 130.93, 130.37, 130.23, 128.40, 127.84, 127.17, 126.30, 126.20, 63.41, 19.52, 19.42 ppm; FT-IR: ν = 3063/3021, 2920/2879/2864, 1635, 1570, 754, 741 cm -1. -(4-Methoxybenzylidine)-p-methoxybenzylamine: (Yellow liquid, GC RT: 16.64 min); 1 H MR (400 MHz, CDCl3): δ = 8.26 (s, 1H), O O 7.72 7.66 (m, 2H), 7.23 (d, J = 8.8 Hz, 2H), 6.93 6.83 (m, 4H), 4.70 (s, 2H), 3.79 (s, 3H), 3.75 (s, 3H) ppm; 13 C MR (101 MHz, CDCl3): δ = 161.72, 160.99, 158.70, 131.74, 129.89, 129.24, 114.03, 113.95, 64.49, 55.40, 55.33 ppm; FT-IR: ν = 3034/3006, 2957/2909/2835, 1640, 1577, 869, 830, 814 cm -1. -(4-(tert-Butyl)benzylidine)-p-(tert-butyl)benzylamine: (Yellow liquid, GC RT: 17.83 min); 1 H MR (400 MHz, CDCl3): δ = 8.35 (s, 1H), 7.73 7.69 (m, 2H), 7.44 7.40 (m, 2H), 7.37 7.33 (m, 2H), 7.28 7.23 (m, 2H),4.77 (s, 2H), 1.33 (s, 2H), 1.31 (s, 9H), 1.30 (s, 9H) ppm; 13 C MR (101 MHz, CDCl3): δ =161.77, 154.18, 149.87, 136.61, 133.73, 129.83, 128.23, 127.89, 127.82, 125.65, 125.50, 64.97, 35.03, 34.60, 31.56, 31.38, 31.22 ppm; FT-IR: ν = 3058/3025, 2960/2902/2867, 1644, 1570, 848, 827, 803 cm -1. S11

O O 1-(Benzo[d][1,3]dioxol-5-yl)--(benzo[d][1,3]dioxol-5- ylmethyl)methanimine: (White solid, GC RT: 18.49 min); 1 H MR O O (400 MHz, CDCl3) δ = 8.21 (s, 1H), 7.39 (d, J = 1.6 Hz, 1H), 7.11 (dd, J = 8.0, 1.6 Hz, 1H), 6.83 6.78 (m, 2H), 6.76 (d, J = 1.0 Hz, 2H), 5.97 (s, 2H), 5.91 (s, 2H), 4.66 (d, J = 1.1 Hz, 2H) ppm; 13 C MR (101 MHz, CDCl3): δ =160.96, 150.03, 148.37, 147.84, 146.62, 133.45, 131.08, 124.67, 121.13, 108.71, 108.31, 108.13, 106.78, 101.57, 101.02, 64.61 ppm; FT- IR: ν = 3074/3027, 2892/2875/2778, 1645, 1560, 920, 874, 863 cm -1. -(4-Fluorobenzylidine)-p-fluorobenzylamine: (Yellow liquid, GC F F RT: 11.16 min); 1 H MR (400 MHz, CDCl3) δ 8.33 (s, 1H), 7.78 7.74 (m, 2H), 7.32 7.21 (m, 2H), 7.12 7.04 (m, 2H), 7.03 6.96 (m, 2H), 4.75 (s, 1H) ppm; 13 C MR (101 MHz, CDCl3): δ = 165.65, 163.31,163.26,160.88, 160.62, 135.10, 135.07, 132.48, 132.45, 130.32, 130.32, 129.61, 129.54, 115.93, 115.72, 115.51, 115.30, 64.22 ppm; FT-IR: ν = 3039/3005, 2753, 1601, 1507, 1155, 819, 873 cm -1. -(4-Chlorolbenzylidine)-p-chlorobenzylamine: (White solid, GC RT: 15.39 min); 1 H MR (400 MHz, CDCl3): δ = 8.31 (s, 1H), 7.72 Cl Cl 7.65 (m, 2H), 7.40 7.34 (m, 2H), 7.32 7.28 (m, 2H), 7.24 (d, J = 8.7 Hz, 2H), 4.74 (s, 2H) ppm; 13 C MR (101 MHz, CDCl3): δ =160.98, 137.76, 137.00, 134.58, 131.02, 129.61, 129.41, 129.07, 128.78, 64.30 ppm; FT-IR: ν = 3064/3028, 2875/2856/2818, 1641, 1570, 824, 811, 799 cm -1. -(2,4-Dichlorobenzylidine)-o,p-dichlorobenzylamine: (White solid, Cl Cl Cl Cl GC RT: 17.79 min); 1 H MR (400 MHz, CDCl3): δ = 8.78 (s, 1H), 8.04 (d, J = 8.5 Hz, 1H), 7.41 7.38 (m, 2H), 7.35 (d, J = 8.3 Hz, 1H), 7.29 7.21 (m, 2H), 4.86 (s, 2H) ppm; 13 C MR (101 MHz, CDCl3): δ = 58.98, 137.48, 135.98, 135.47, 134.11, 133.59, 131.66, 130.60, 130.57, 130.45, 129.78, 129.47, 129.30, 128.11, 127.75, 127.37, 61.70 ppm; FT- IR: ν = 3090/3025, 2901/2850/2807, 1641, 1584, 861, 834, 819, 802, 773 cm -1. S S 1-(Thiophen-2-yl)--(thiophen-2-ylmethyl)methanimine: (Yellow liquid, GC RT: 11.64 min); 1 H MR (400 MHz, CDCl3): δ = 8.38 (d, J = 1.2 Hz, 1H), 7.38 (dt, J = 5.0, 1.0 Hz, 1H), 7.29 (dd, J = 3.6, 1.1 Hz, 1H), 7.21 (dd, J = 4.9, 1.5 Hz, 1H), 7.04 (dd, J = 5.0, 3.6 Hz, 1H), 6.99 6.92 (m, 2H), 4.92 (s, 2H) ppm; 13 C MR (101 MHz, CDCl3): δ = 155.52, 142.19, 141.64, 131.13, 129.44, 127.50, 126.99, 125.38, 124.93, 58.61, ppm; FT-IR: ν = 3058/3025, 2960/2902/2867, 1644, 1570, 861, 834, 819, 802, 773 cm -1. S12

1-Phenyl--(1-phenylethyl)ethan-1-imine: (Yellow liquid, GC RT: 11.83 min,); 1 H MR (400 MHz, CDCl3): δ = 7.99 7.91 (m, 2H), 7.59 7.49 (m, 1H), 7.45 (ddt, J = 8.2, 6.6, 1.1 Hz, 2H), 7.39 7.26 (m, 4H), 7.26 7.17 (m, 1H), 4.10 (q, J = 6.6 Hz, 1H), 2.59 (s, 3H), 1.37 (d, J = 6.6 Hz, 3H) ppm; 13 C MR (101 MHz, CDCl3) δ =165.03, 137.15, 133.17, 129.48, 128.63, 128.53, 128.43, 128.37, 128.23, 126.87, 126.85, 126.74, 125.75, 59.90, 25.19, 15.66 ppm; FT-IR: ν = 3060/3025, 2962/2923/2866, 1684, 1581, 759, 700, 690 cm -1. -heptyl-1-phenylmethanimine: (Yellow liquid, GC RT: 10.14 min); 1 H MR (400 MHz, CDCl3): δ = 8.26 (s, 1H), 7.74-7.70 (m, 2H), 7.44 7.35 (m, 3H), 3.62-3.58 (m, 2H), 1.72-1.69 (m, 2H), 1.31-1.24 (m, 8H), 0.88 (t, J = 6.6 Hz, 3H) ppm; 13 C MR (101 MHz, CDCl3): δ = 160.88, 136.47, 130.59, 128.71, 128.17, 61.97, 31.99, 31.09, 29.30, 27.49, 22.82, 14.28 ppm; FT-IR: ν = 3063/3025, 2956/2926/2853, 1646, 1580, 826, 753, 692 cm -1. (1) Liu, L.; Zhang, S.; Fu, X.; Yan, C.-H., Chem. Commun. 2011, 47, 10148-10150. (2) Lee, Y.-H.; Yu, L.; Wang, H.; Fang, W.; Ling, X.; Shi, Y.; Lin, C.-T.; Huang, J.-K.; Chang, M.-T.; Chang, C.-S.; Dresselhaus, M.; Palacios, T.; Li, L.-J.; Kong, J., ano Lett. 2013, 13, 1852-1857. S13