ΔΗΜΗΤΡΙΟΣ ΒΛΑΧΟΣ ΤΟΥ ΕΛΕΥΘΕΡΙΟΥ Προσωπικά Στοιχεία ΤΟΠΟΣ ΚΑΙ ΗΜΕΡΟΜΗΝΙΑ ΓΕΝΝΗΣΗΣ: Αθήνα, 17 Οκτωβρίου 1973 ΔΙΕΥΘΥΝΣΗ ΚΑΤΟΙΚΙΑΣ: ΟΙΚΟΓΕΝΕΙΑΚΗ ΚΑΤΑΣΤΑΣΗ: Μήλου 44, τκ: 26442, Πάτρα Τηλ. 2610-990154, 6974-372440 e-mail : vlahos@mech.upatras.gr Έγγαμος (2 τέκνα) Εκπαίδευση 1985-1991 : 1992-1998 : 1998 : 1999-2006: 2006: Δευτεροβάθμια εκπαίδευση - 5 ο Γυμνάσιο-Λύκειο Πειραιά Προπτυχιακές σπουδές στο τμήμα Μηχανολόγων & Αεροναυπηγών Μηχανικών του Πανεπιστημίου Πατρών Δίπλωμα Μηχανολόγου Μηχανικού Υποψήφιος Διδάκτωρ, τμήμα Μηχανολόγων & Αεροναυπηγών Μηχανικών του Πανεπιστημίου Πατρών, Εργαστήριο Εφαρμοσμένης Μηχανικής Διδάκτωρ, τμήμα Μηχανολόγων & Αεροναυπηγών Μηχανικών του Πανεπιστημίου Πατρών Επαγγελματική εμπειρία 1999-2004: 2004-2005 : Εργασία σε ερευνητικά προγράμματα, Πανεπιστήμιο Πατρών και ΕΙΧΗΜΥΘ/ΙΤΕ Στρατιωτική θητεία (Ελληνική Αεροπορία, Εργοστάσιο Μεταφορικών Μέσων και Επίγειου Εξοπλισμού Αράξου) 2006-2009 Εργασία στα πλαίσια ευρωπαϊκού προγράμματος ERANET/AirTN ως Εμπειρογνώμων-Επιστημονικός Σύμβουλος, Γενική Γραμματεία Έρευνας και Τεχνολογίας, Διεύθυνση Διεθνούς Ε&Τ Συνεργασίας 2010 2006-σήμερα 2016-σήμερα Επιστημονικός συνεργάτης ΑΤΕΙ Πατρών, Τμήμα Μηχανολογίας (Διεξαγωγή μαθήματος Αριθμητική Ανάλυση-Πεπερασμένα Στοιχεία και εργαστηρίου Τεχνολογία Υλικών ) Μεταδιδακτορικός ερευνητής στο Εργαστήριο Εφαρμοσμένης Μηχανικής, τμήμα Μηχανολόγων & Αεροναυπηγών Μηχανικών του Πανεπιστημίου Πατρών Τεχνικός διευθυντής Adamant Composites ΕΠΕ. 1
Μέλος Γλώσσες Τεχνικού Επιμελητηρίου Ελλάδος, 1999 Αγγλικά (άπταιστα) Γερμανικά Εμπειρία σε Υ/Η Λειτουργικά συστήματα: Windows, Linux, Unix Γλώσσες προγραμματισμού: Microsoft Quick Basic, Fortran, C++ Λογισμικό: Μαθηματικά Γενικά Επιστημονικά: Matlab, Origin, Microsoft Excel Σχεδιαστικά: MSC-Patran, Rhinoceros, Solid Edge, Siemens-NX ) Κώδικες Πεπερασμένων Στοιχείων: MSC-Nastran,ANSYS, LS-DYNA,, FEMAP ) Διπλωματική Εργασία Ανάλυση με Πεπερασμένα Στοιχεία πειράματος νανο-διείσδυσης σε υλικά με λεπτή επίστρωση Διδακτορική Διατριβή Επιβλέπων: Καθ. Βασίλης Κωστόπουλος Σχεδιασμός στοιχείων κατασκευών από Σύνθετα Κεραμικά Υλικά υπό συνθήκες Θερμομηχανικής κόπωσης Επιβλέπων: Καθ. Βασίλης Κωστόπουλος Ερευνητικά Ενδιαφέροντα Σχεδιασμός και ανάλυση κατασκευών Αεροναυπηγικές κατασκευές Σύνθετα Υλικά (οργανικής κεραμικής μήτρας) Μέθοδοι παραγωγής προηγμένων συνθέτων υλικών Additive Layer Manufacturing Εφαρμογές της Νανοτεχνολογίας στην Επιστήμη των Υλικών Αριθμητικές Μέθοδοι και Ανάλυση με Πεπερασμένα Στοιχεία 2
Συμμετοχή σε Ερευνητικά Προγράμματα 1. BRITE/EURAM, Continuous Atmosphere in-line aerosol CVD at low temperatures, 1993-1997. 2. EPET 1.5, Infrastructure installation for a local development, installation and maintenance of wind energy production system in combination with sea water desalination system (WinD), 1992-1994. 3. EKVAN(EPET ΙΙ), New Materials in Constructions NYKA (Design and construction of a model highway bridge using composite materials), 1998-2002. 4. BRITE/EURAM, CERCO: Ceramic Components for Industrial Gas Turbines, 1998-2002 5. GROWTH, Ceramic and Carbon Fibers: Verification of Testing Methods - VaFTeM, 2001-2004. 6. FP 6, EU-STREP: Double Inverted Funnel for the Intervention on Ship Wrecks DIFIS, 2006-2009. 7. FP 6, EU-STREP, Vulnerability Analysis For Near Future Composite/Hybrid Aerostructures: Hardening Via New Materials And Design Approaches Against Fire And Blast Due To Accidents Or Terrorist Attacks VULCAN, 2006 8. FP 7, EU-L1: Multifunctional Layers For Safer Aircraft Composite Structures, LAYSA, 2008-2010. 9. FP 7, EU-L1: Autonomous Surveillance in Public Transport Infrastructure Systems, ASPIS, 2008-2010. 10. FP 7, EU-L1: Innovative Repair of Aerospace Structures with Curing Optimization & Life Cycle Monitoring Abilities, IAPETUS, 2008-2012. 11. FP 7, EU NMP: Innovative Smart Composite Moulds for Cost Effective Manufacturing of Plastic and Composite Components, COEUS TITAN, 2010-1013. 12. FP 7, EU-L1: 'Composite fuselage section Wafer Design Approach for Safety Increasing in Worst Case Situations and Joints Minimizing', WASIS, 2011-2014 13. Clean sky JU: 'Study on the processing and the performance of cyanate ester composites towards the optimization for harsh service environments, SPECIMEN, 2011-2013 14. Clean Sky JU: 'Industrialisation of out-of-autoclave manufacturing for integrated aerostructures', IRIDA, 2012-2014 15. FP7, EU-L0: ' Future Aircraft design following the carrier-pod concept as an enabler for co-modal seamless Transport, passenger Safety and environmental sustainability', FANTASSY, 2012-2014 16. FP7, EU-L1: ' Advanced technologies for bomb-proof cargo containers and blast containment units for the retrofitting of passenger airplanes', FLYBAG2, 2012-2015 3
Δημοσιεύσεις σε Επιστημονικά Περιοδικά 1. Kotzakolios, A., Vlachos, D.E., Derdas, C. and Kostopoulos, V. (2014). "On the blast response of sandwich aerospace composites", International Journal of Computer Aided Engineering and Technology 2. Mazarakos, D.E. and Vlachos, D.E. and Kostopoulos, V., (2013). "Structural analysis of a steel double hull underwater tank, intended for oil recovery from shipwrecks", International Journal of Computer Aided Engineering and Technology, vol. 5, no. 1, pp. 76-98 3. Athanasopoulos, N. and Koutsoukis, G. and Vlachos, D. and Kostopoulos, V., (2013). "Temperature uniformity analysis and development of open lightweight composite molds using carbon fibers as heating elements", Composites Part B: Engineering, vol. 50, pp. 279-289 4. Sikoutris, D.E. and Vlachos, D.E. and Kostopoulos, V. and Jagger, S. and Ledin, S., (2012). "Fire burnthrough response of CFRP aerostructures. Numerical investigation and experimental verification", Applied Composite Materials, vol. 19, no. 2, pp. 141-159 5. Kotzakolios, T. and Vlachos, D.E. and Kostopoulos, V., (2011). "Blast response of metal composite laminate fuselage structures using finite element modelling", Composite Structures, vol. 93, no. 2, pp. 665-681 6. Kotzakolios, T. and Vlachos, D.E. and Kostopoulos, V., (2011). "Investigation of blast response of GLARE laminates: Comparison against experimental results", Plastics, Rubber and Composites, vol. 40, no. 6-7, pp. 349-355 7. Kostopoulos, V. and Vlachos, D.E. and Paipetis, A. and Sotiriadis, G., (2006). "Anisotropic damage of alumina/alumina CFCCs under long term high temperature exposure: Investigations by ultrasonic stiffness measurements and quasi-static tests", Composites Science and Technology, vol. 66, no. 16, pp. 3221-3229 8. Paipetis, A. and Pappas, Y.Z. and Vlachos, D.E. and Kostopoulos, V., (2005). "Damage modelling and simulation of composite materials using ultrasonic measurements", Advanced Composites Letters, vol. 14, no. 3, pp. 85-94 9. Kostopoulos, V. and Markopoulos, Y.P. and Vlachos, D.E. and Katerelos, D. and Galiotis, C. and Tsiknias, T. and Zacharopoulos, D. and Karalekas, D. and Chronis, P. and Kalomallos, D., (2005). "Design and construction of a vehicular bridge made of glass/polyester pultruded box beams", Plastics, Rubber and Composites, vol. 34, no. 4, pp. 201-207 10. Vlachos, D.E. and Pappas, Y.Z. and Innocenti, M. and Kostopoulos, V., (2002). "A new design methodology for high temperature structural components made of continuous fibre ceramic composites exhibiting thermally induced anisotropic damage", Advanced Composites Letters, vol. 11, no. 5, pp. 221-234 11. Kostopoulos, V. and Markopoulos, Y.P. and Giannopoulos, G. and Vlachos, D.E., (2002). "Finite element analysis of impact damage response of composite motorcycle safety helmets", Composites Part B:Engineering, vol. 33, no. 2, pp. 99-107 12. Vlachos, D.E. and Markopoulos, Y.P. and Kostopoulos, V., (2001). "3-D modeling of nanoindentation experiment on a coating-substrate system", Computational Mechanics, vol. 27, no. 2, pp. 138-144 4
Δημοσιεύσεις σε Συνέδρια 1. D.E. Vlachos, Y.P. Markopoulos, V. Kostopoulos, 3-D modeling of nanoindentation experiment on a coating-substrate system, 3 rd National Conference on Computational Mechanics, Volos, Greece, July 1999. Vol. I, pp. 189-197. 2. Y.P. Markopoulos, G. Giannopoulos, D.E. Vlachos and V. Kostopoulos, Crashworthiness Study of Composite Motorcycle Safety Helmet, ECCM-9, Brighton, UK, June 2000. 3. D.E. Vlachos, Y.Z. Pappas, R. De Stefano and V. Kostopoulos, A New Design Methodology for High Temperature Structural Components made of Continuous Fiber Ceramic Composites exhibiting thermally induced Anisotropic Damage, 6th National Congress on Mechanics, Thessaloniki, July 2001. 4. V. Kostopoulos, Y.P. Markopoulos, D.E. Vlachos, C. Galiotis and N.E. Melanitis, A Heavy Duty Composite Bridge Made Of Glass/Polyester Pultruded Box Beams, RTO Applied Vehicle Technology Panel, Loen, Norway, May 2001. 5. V. Kostopoulos, Y.Z. Pappas and D.E. Vlachos, An Innovative Design Methodology for High Temperature Structural Components Made of Ceramic Matrix Composites, HELLAS-COMP 2001, Patras, Greece, 2001. 6. V. Kostopoulos, Y.P. Markopoulos, D.E. Vlachos, D. Katerelos and C. Galiotis, A Heavy Duty Composite Bridge Made of Glass/Polyester Pultruded Box Beams, ECCM-10, Bruge, Belgium, June 2002. 7. G. Sotiriadis, D.E. Vlachos and V. Kostopoulos, On the Preliminary Evaluation of organic composite routes for the manufacturing of Oxide/Oxide Composites using DMA technique, THERMA 2002, Thessaloniki, Greece, September 2002. 8. D.E. Vlachos, A.S. Paipetis, V. Kostopoulos Damage Accumulation on Oxide/Oxide Composites Under Thermal Exposure, COMP 2003, Corfu, Greece, May 2003. 9. T. Kotzakolios, D.E. Vlachos, V. Kostopoulos. Blast response of composite fuselage structures using FEM, Deformation and Fracture of Composites Conference (DFC10) 15-17 April 2009, Sheffield, UK. 10. T. Kotzakolios, D.E. Vlachos, C. Derdas, V. Kostopoulos. On the blast response of sandwich aerospace structures, Hellenic Society for Theoretical & Applied Mechanics Conference (HSTAM 2010), 12-14 July 2010, Limassol, Cyprus 11. T. Kotzakolios, D.E. Vlachos, V. Kostopoulos. Blast response of composite fuselage structures using Finite Element Analysis,14 th European Conference on Composite Materials, (ECCM14), June 2010, Budapest, Hungary. 12. T. Kotzakolios, D.E. Vlachos, V. Kostopoulos. Blast response of GLARE laminates using explicit finite element analysis.-comparison against experimental results,14 th European Conference on Composite Materials, (ECCM14), June 2010, Budapest, Hungary. 13. T. Kotzakolios, D.E. Vlachos, V. Kostopoulos. On the Blast Response of Hardened Fuselage Structures, 6 th European Aeronautics Days, (AERODAYS 2011), March 2011, Madrid, Spain. 5
14. D.E. Vlachos and V. Kostopoulos. " FANTASSY project: Future Aircraft design following the carrierpod concept as an enabler for co-modal seamless Transport, passenger Safety and environmental sustainability", 3 rd AirTN forum on Enabling and promising technologies for achieving the goals of Europe's Vision Flightpath 2050, September 2013, Cranfield University, UK 15. P.Dimoka, D.Ε. Vlachos, N. Athanasopoulos, A. Kotrotsos, K. Antoniadis, V. Kostopoulos "Self- Heating Composite molds for the green' manufacturing of composite components", 10th Hellenic Polymer Society Conference, Patras, Greece, December 2014, 16. D.E. Vlachos, V. Kostopoulos, "A Carrier-pod Aircraft Configuration for the Air Transport System beyond 2050", 7 th European Aeronautics Days, (AERODAYS 2015), October 2015, London, England. Διπλώματα Ευρεσυτεχνίας Μη επεμβατικό σύστημα ακινητοποίησης της κεφαλής για στερεοτακτική ακτινοθεραπεία (OBI 20000100315) Δικτυωματικοί φορείς κατασκευασμένοι από σύνθετα πολυμερή υλικά (OBI 20010100233) 6