Curriculum Vitae of Anna D. Zervaki President of the Hellenic Metallurgical Society Metallurgical Engineer Ph.D.

Transcript

1 Curriculum Vitae of Anna D. Zervaki President of the Hellenic Metallurgical Society Metallurgical Engineer Ph.D. Personal Data Contact: Date of Birth: Nationality: Anna Zervaki Laboratory of Materials Department of Mechanical Engineering University of Thessaly Pedion Areos, GREECE Tel: , Fax:: Web: , Heraklion, Crete Greek Education 12/ /2004: Ph.D., Dept. of Mechanical Engineering, University of Thessaly (UTH), Greece Thesis Laser Welding of Al alloys: Experimental study and Simulation of Microstructure Evolution in the HAZ 09/ /1989: Integrated.1 st and 2 nd cycle degree (Diploma) in Mining & Metallurgical Engineering, National Technical University of Athens, Greece (NTUA) Seminars 04/ 1996: Computational Kinetics, Royal Institute of Technology, Stockholm, Sweden. 02/ 1997: EUROLASER Academy, Laser Welding, Laser Surface Treatment, Laser Bending University of Liverpool, Liverpool, UK. 06/ 2008: Simulation of Phase Transformation, DGM, Frankfurt, Germany. 08/ 2013: Introduction to the Phase Field Method, Access e.v., Aachen, Germany Research Interests Laser and Electron beam welding of Al alloys/ Structure-Processing-Properties-Performance interactions in metallic materials/application of computational alloy thermodynamics and kinetics in simulation of heat treatments and welding processes/phase field simulations of welding and casting /Laser Materials Processing/Mechanical Behavior of Metallic Materials/Friction Stir Welding of light alloys/corrosion behavior of Al and Mg alloys/ Shape memory alloys/biomaterials/ Failure Analysis of Mechanical Components and Structures.

2 Current Positions 07/2014- now: Laboratory Teaching Staff, Dept. of Mechanical Engineering, UTH, 02/2010-now: Greece Adjunct Professor, Dept. of Mechanical Engineering, UTH, Greece Previous Positions 08/ /2014: Research Associate, Dept. of Mechanical Engineering, UTH, Greece 01/ /2002: Laboratory Engineer, Region of Thessaly, Regional Laboratory of Public Works, Volos, Greece 12/ /2002: Head of Laboratory Division MITRCEC S.A., 1 st Industrial Area of Volos, Greece 07/ /2002: Head of the Laser Application Division, MIRTEC S.A, 1 st Industrial Area of Volos, Greece 08/ /1992: Research Associate MITRCEC S.A., 1 st Industrial Area of Volos, Greece 06/ /1990: Research Assistant, Institute of Electronic Structure and Laser/ FORTH/IESL, Heraklion, Crete, Greece Awards 12/1996: National Scholarship for conducting applied industrial research, General Secretariat of Research and Technology, Greee 10/2013: Best Teaching award, for the course: Failure Analyisis of Mechanical Components and Structures, Dept. of Mechanical Engineering, UTH, Greece. Languages Greek (Native), English (Professional Level) Teaching Activities Advisor in MSc Theses D. Vriami, Experimental study on the weldability of the new generation Al alloys with high power beams (June 2010). D. Koulidis, Fatigue behavior of the aerospace Al alloy 2195, with longitudinal FSW (June 2010). D. Gialidis, Experimental study of the fatigue behavior of lap FSW joints of the alloy 2024-T3 (October 2013). P. Christopoulos, Metallurgical Study of Initiation and Propagation of RCF Cracks in Rails (October 2013). M. Horianopoulos, Experimental Study of FSW in Mg alloys (June 2014) Ch. Karanastasis, Simulation of microstructural evolution in Al:Cu bimetallic joints with the phase field method(june 2014). D. Giantsis, Failure analysis in vatrious components in oil refineries (in progress) K. Chatzimpaloglou, Shape Memory Alloys: Microstructure and Mechanical Properties(March 2016) Page 2 / 11

3 K. Tatsios, Experimental Study of FSW of bimetallic Al:Mg joints (in progress) N. Maropakis, RCF phenomenon in Rails: Evaluation of results acquired from GMR sensors with metallographic investigation (in progress) Courses 02/2010-now: Failure Analysis of Mechanical Components and Structures (8 th semester, Dept of Mechanical Engineering, UTH) 09/2019-now: Metal Forming (7 th semester, Dept. of Mechanical Engineering, UTH) 09/ /2013: Laboratory part of the Physical Metallurgy course, (4 th semester, Dept. of Mechanical Engineering, UTH) 09/2002-now/: Laboratory part of the Science and Technology of Welding & Joining course (4 th semester, Dept. of Mechanical Engineering, UTH) Services to the Industrial Sector Failure analysis projects for several Greek Industries. A number of 200 projects have been conducted at the Materials Laboratory, UTH since 2002, while above 2500 projects were conducted in MITREC S.A. ( ) regarding services to the industry. The services included: failure analysis, materials selection, Reverse engineering, Evaluation of the microstructure of metallic materials with portable metallography (replica), WPS, Determination of Microstructure and Mechanical Properties. Professional Experience Characterization of materials microstructure: Optical Microscopy, Scanning Electron Microscopy, Atomic Force Microscopy, X-ray Diffraction, Replica Metallography. Fractography with stereoscope and SEM Mechanical properties determination according to National and International Standards: Tensile, Bending, Fatigue, SCC, Impact, hardness,microhardness, nanohardness., Laser Materials Processing (cutting, drilling, welding, surface treatments) Destructive and non destructive tests in pressure vessels. Failure analysis, material selection, Reaming life determination, Cooperation with main sectors of the Greek Industry: Hellenic Petroleum, Motor Oil Hellas, Urban Railways of Public Power Corporation, Aluminum of Greece, VIOLEX-BIC, FRIGOGLASS, Hellenic Shipyards, SIELMAN S.A. Corinth Pipe Works, Mayflower- Ship Management Corporation etc.) Knowledge and Innovation Transfer to the Industry Feasibility study High power lasers: Industrial applications and perspective results, MIRTEC SA, Page 3 / 11

4 Feasibility study Application of 3D laser engraving method in glass MONOTHERM ABEE, 2002 Laboratory for knowledge transfer «Technology of Light Alloys» 307 ΤSΥΑΥ, 2002 Innovative strategy on the management of changes in the SME s in the field of industrial equipment, SEV, CERETETH, Published Work A. Publications in Referred Journals Α1. H. Vazarlis, I. Halikia and A. Zervaki, Production of Ferrochrome by using Greek Lignite Coke. The Distribution of Sulfur, Mining & Metallurgical Annals, No. 70, p.p , Α2. J. McIntosh, A. Zervaki, K. Papadimitriou, G.N. Haidemenopoulos, A. Manousaki, E. Hontzopoulos and G. Zergioti, Excimer Laser used as Materials Characterization Tool. Sulfide Inclusion printing in Steel, Laser Chemistry, 13, , Α3 Ι. Zergioti, A.D. Zervaki, A. Hatziapostolou, G.N. Haidemenopoulos, and E. Hontzopoulos, Deposition of Refractory Compounds with LCVD, Journal of Optical and Quantum Electronics, Vol.27, p , Α4. Ι. Zergioti, A. Hatziapostolou, E. Hontzopoulos, A.D. Zervaki and G.N. Haidemenopoulos, Pyrolytic Laser-Based Chemical Vapour Deposition of Titanium Carbide Coatings, Thin Solid Films, 271, p , A5. A.I. Katsamas, G.N. Haidemenopoulos and A.D. Zervaki, Laser Transformation Hardening of Hypoeutectoid Ck-60 Steel, Journal of the Balkan Tribological Association, Vol. 3, No. 2, p ,1997. Α6. A.I. Katsamas, A.D. Zervaki and G.N. Haidemenopoulos, Laser-Beam Surface Transformation Hardening of Hypoeutectoid Ck-60 Steel, Steel Research, Vol. 68, No. 3, p , A7. M.Vlahogiannis, A.D. Zervaki and G.N. Haidemenopoulos, Laser Welding of D-36 Ship Steel, Technical Annals, TCG, Vol. 18, 1-2, pp: 63-71,1998. Α8. A.I. Katsamas, G.N.Haidemenopoulos, A.D. Zervaki and I. Melas, Stress Corrosion Cracking of MONEL 400 Tube, Failure Analysis and Prevention, Vol. 4, No.6, p.p , Α9. G.N. Haidemenopoulos, A. D. Zervaki, P. Terezakis, J. Tzanis and A.E. Giannakopoulos, Investigation of Rolling Contact Fatigue Cracks in a Grade 900A Rail Steel of a Metro Track, Fatigue and Fracture of Engineering Materials and Structures,, Vol.29, pp , Α10. A.D. Zervaki & G.N. Haidemenopoulos, Computational Kinetics Simulation of the Dissolution and Coarsening in the HAZ during Laser Welding of 6061-T6 Al-alloy, Welding Journal, Vol.86, pp. 211s-221s, Α11. A.D. Zervaki, G.N. Haidemenopoulos and S.G.Lambrakos, Analysis of Heat Affected Zone in Welded Aluminum Alloys using Inverse and Direct Modelling, Journal of Materials Engineering and Performance, 17(3) pp , Α12. A. Kermanidis, A.D. Zervaki, G.N. Haidemenopoulos and S. Pantelakis, Effect of Aging and Corrosion on the Fatigue Performance of Laser-Welded Al-Cu-Mg-Ag alloys, Materials and Design, 31 pp , 2010 A13. A. Th. Kermanidis, A.D. Zervaki, G. N. Haidemenopoulos and Sp. G. Pantelakis, Page 4 / 11

5 The influence of salt fog exposure on the fatigue performance of Alclad 6xxx Aluminum Alloys laser beam welds, Journal of Materials Science, 45 pp , A14. Μ.P.Papadopoulos,C.A.Apostolopoulos,A.D.Zervaki,G.N.Haidemenopoulos, Corrosion of Exposed Rebars: Associated Mechanical Degradation and Correlation with Accelerated Corrosion Tests, Construction & Building Materials, 25 (8), pp , Α16. S.G. Lambrakos, A.D. Zervaki and G.N. Haidemenopoulos, A Numerical Method for Inverse Thermal Analysis of Steady-State Energy Deposition In Plate Structures, Journal of Materials Engineering and Performance, 21 (2), pp , Α17. A.D. Zervaki, G.N. Haidemenopoulos, D. P. Vriami, S.G. Lambrakos, Case-Study Inverse Thermal Analyses of Al2198 Laser Welds, Journal of Materials Engineering and Performance, 21 (4), pp , A18 A.D. Zervaki, G.N. Haidemenopoulos, D. P. Vriami, S.G. Lambrakos, Case-Study Inverse Thermal Analyses of Al2139 Laser Welds, Journal of Materials Engineering and Performance, 21 (6), pp , A19. G.N. Haidemenopoulos, H. Kamoutsi, A.D. Zervaki, Simulation of the transformation of iron intermetallics during homogenization of 6xxx series extrudable aluminum alloys, Journal of Materials Processing Technology, 212 (11), pp Α20. A.D. Zervaki, G.N. Haidemenopoulos, S.G. Lambrakos, Inverse thermal analysis of heat-affected zone in Al2129 and Al2198 laser Welds, Journal of Materials Engineering and Performance, 22 (6), pp , Α21. A.D. Zervaki, S.G. Lambrakos,V. Stergiou, Case-Study Inverse Thermal Analyses of Al2139 and Al2198 Electron Beam Welds, Journal of Materials Engineering and Performance, 22 (11), pp , A22. A.T.Kermanidis, A.D.Zervaki,V. Modas, A.N.Chamos, S. Pantelakis, Fatigue performance of pre-corroded 6xxx aluminum alloy laser beam welds with dissimilar heat treatment, Procedia Engineering, 74, pp.22-26,2014. A23. Sp.G. Pantelakis, D. Setsika, A. Chamos, A.D. Zervaki, Corrosion damage evolution of the aircraft aluminum alloy 2024 T3, International Journal of Structural Integrity, 7(1) pp , A24. V. Athanasiou, A. D Zervaki, E. Papamichos and A.E. Giannakopoulos, The use of Knoop indentation for the assessment of mechanical properties of mortars & natural stones I: Elastic properties, International Journal of Rock Mechanics and Mining Sciences, 83, pp , A25: G.N.Haidemenopoulos, P. Sarafoglou, P.Christopoulos and A.D.Zervaki, Rolling contact fatigue cracking in rails subjected to in-service loading, Fatigue and Fracture of Engineering Materials and Structures, 2016 in press. B. Conference Proceedings B1. G.N. Haidemenopoulos, K. Papadimitriou, A. Zervaki and E. Hontzopoulos, Excimer Laser Surface Treatment of Aluminum Alloys, Eureka Eurolasers International Workshop on Excimer Lasers Applications and Optical Components, Heraklion, 8-9 October Page 5 / 11

6 B2. G.N. Haidemenopoulos, A.D. Zervaki, K. Papadimitriou, D. Tsipas, J. McIntosh, I. Zergioti, A.Manousaki, and E. Hontzopoulos, Surface Treatment of Metals with Excimer and CO2 Lasers, SPIE Proceedings, Vol.1810,p , B3. E. Hontzopoulos, A. Zervaki, I. Zergioti, G. Hourdakis, E. Raptakis, A. Giannakopoulos and C. Fotakis, Excimer laser ceramic and metal surface alloying application, SPIE Proceedings 1397, 761, (1990). B4. G.N. Haidemenopoulos, A.D. Zervaki, K. Papadimitriou, D. Tsipas, J. McIntosh, I. Zergioti, A.Manousaki, and E. Hontzopoulos, Surface Treatment of Metals with Excimer and CO2 Lasers, SPIE Proceedings, Vol.1810,p , B5. I. Zergioti, A. Petrakis, A. Hatziapostolou, E. Hontzopoulos, A. Zervaki, J. McIntosh, and G.N. Haidemenopoulos, Deposition of Hard Coatings on Tool Steels, Proc. Eureka Eurolasers EU205 international Workshop on Excimer Laser Applications, Erlangen, Germany, p.76, B6. A.D. Zervaki, G.N. Haidemenopoulos, and D.N. Tsipas, Improved Powder Compositions for Thermochemical Diffusion Treatments of Metals and Alloys, in Surface Engineering Vol.1: Fundamentals of Coatings, ed. P.K. Datta and J.S. Gray, p.71-78, B7. A.D. Zervaki, G.N. Haidemenopoulos, I.S. Zergioti, A. Hatziapostolou and E. Hontzopoulos, Deposition of Titanium Carbide on Tool Steel by LCVD, European Physical Society (EPS) Workshop on Medical and Industrial Applications of Lasers, Crete, May 23-27, B8. A.D. Zervaki, G.N. Haidemenopoulos, Cutting of steel plates with CO2 laser, Panhellenic Conference on Laser and Application, Ioannina, September B9. I. Zergioti, A. Hatziapostolou, A. Petrakis, H. Hontzopoulos, A. Zervaki, G.N. Haidemenopoulos,Growth of Ceramic Coatings on metal tools by the Laser Chemical Vapour Deposition, Conference on Laser and Application, Ioannina, September B10. Α. Hatziapostolou, I. Zergioti, E.Hontzopoulos, A. Zervaki and G.N. Haidemenopoulos, Process Control of Laser Chemical Vapour Deposition of TiC on Tool Steel, Proc. NATO Conf. on Laser Processing: Surface Treatment and Film Deposition, J. Mazumder (ed.), p , B11. A.Katsamas, G.N. Haidemenopoulos, and A.D. Zervaki, Laser Transformation Hardening in Α Hypoeutectoid Ck-60 Steel, Proceedings Balkantrib 96 2nd International Conference on Tribology, Edit. K.D. Bouzakis, Thessaloniki, June 1996, p B12. A.D. Zervaki and G.N. Haidemenopoulos, Laser welding of 6xxx series Aluminum Alloys, Proc. EUROMAT 1999, Vol.1: Materials for Transportation Technology (editor: P.-J. Winkler Wiley-VCH), p , Munich, Germany, October B13. Α. Ζερβάκη και Γ.Ν. Χαϊδεμενόπουλος, Συγκολλήσεις Κραμάτων Αλουμινίου Σειράς 6xxx με laser Διοξειδίου του Ανθρακα, Πρακτικά 1 ου Πανελληνίου Συνεδρίου Μεταλλικών Υλικών, Παν. Θεσσαλίας, Βόλος Νοεμβρίου, B14. Α.Δ. Ζερβάκη και Γ.Ν. Χαϊδεμενόπουλος, Συγκολλήσεις Συμβολής Χαλύβων με Laser Διοξειδίου του Άνθρακα, Πρακτικά 1 ου Πανελληνίου Συνεδρίου Μεταλλικών Υλικών, Παν. Θεσσαλίας, Βόλος Νοεμβρίου, B15. A.D. Zervaki and G.N. Haidemenopoulos, Laser Welding of Steels with CO2 Laser, Proc. Intern. Conf. on Manufacturing Engineering (ICMEN), Thessaloniki, Greece, pp , 3-4 October, Page 6 / 11

7 B16. A.D. Zervaki and G.N. Haidemenopoulos, Process Model for Al-Alloys Welding Optimization, Proc. IFAC MIM International Conference, Athens, October, B17. Α. Ζερβάκη, Γ.Ν. Χαϊδεμενόπουλος, Προσομοίωση Διαμόρφωσης Μικροδομής στη ΘΕΖ συγκολλήσεων laser Κράματος 6061, Πρακτικά 2 ου Πανελληνίου Συνεδρίου Μεταλλικών Υλικών, ΕΜΠ, Νοεμβρίου, B18. A.D. Zervaki and G.N. Haidemenopoulos, Simulation of Dissolution and Coarsening in the HAZ 0f 6061 Al-Alloy During Laser Welding, 7th Int. Conf. On Trends in Welding Research, Pine Mountain, Georgia, USA, May 16-20, B19. G.N. Haidemenopoulos, A. Zervaki, P. Terezakis, J. Tzanis, A.E. Giannakopoulos, Investigation of Rolling Contact Fatigue Cracks in a Grade 900A Rail Steel of a Metro Track, Proc. 2nd International Conference on Manufacturing Engineering (ICMEN), Thessaloniki, 4-7 October, B20. A.D. Zervaki, G.N. Haidemenopoulos and S. Lambrakos, Analysis of Heat Affected Zone Using Direct and Inverse Modelling in 6XXX Aluminum Alloys, 8 th International Seminar on Numerical Analysis of Weldability, Graz-Seggau, Austria, Sept , B21. E. Drakaki, A.A. Serafetinides, I. Zergioti, A. Zervaki, P. Vasiliou, Κ. Vlachou, Laser cleaning processes on Roman coins: Analysis of structural and surface modifications by different laser wavelengths and energy fluencies., LTL PLOVDIV`2005IV, International Symposioum-Laser technologies and Lasers Plovdic, Bulgaria, B22. E. Drakaki, A.A. Serafetinides, I. Zergioti, A. Zervaki, Κ. Vlachou, Laser cleaning of ancient metal coins: Structural and surface studies of the laser wavelength and energy fluence effects, LACONA VI, Wien, B23. Sp. G. Pantelakis, Al. Th. Kermanidis, G. A. Papadimitriou,G. N.Haidemenopoulos, A. D. Zervaki, Fatigue performance of 2139 aluminum alloy laser beam welds following exposure to salt spray environment, Proceedings of IX International Meso- Mechanics Conference, Giens, France, B24. Α. Δ. Ζερβακη, Π. Ταϊγανιδου και Γ.Ν. Χαϊδεμενοπουλος, Μεταλλουργική διερεύνηση της κόπωσης σε συγκολλήσεις laser αεροπορικών κραμάτων αλουμινίου, Πρακτικά 3 ου Πανελληνίου Συνεδρίου Μεταλλικών Υλικών, Πανεπιστήμιο Πάτρας, 6-7 Δεκεμβρίου B25. Σ. Παπαευθυμίου, Α. Τζαμτζής, Ε. Πολατίδης, Α. Ζερβάκη και Γ.Ν. Χαϊδεμενόπουλος, Συγκολλήσεις Λεπτών Ελασμάτων Αλουμινίου της Σειράς 5xxx με MIG και TIG, Πρακτικά 3 ου Συνεδρίου Μεταλλικών Υλικών, Πανεπιστήμιο Πάτρας, 6-7 Δεκεμβρίου B26. S. G. Lambrakos, H. N. Jones, A. D. Zervaki, G. N. Haidemenopoulos, Sensitivity Issues Concerning Inverse Heat-Transfer Analysis of Welds, 8th Int. Conf. on Trends in Welding Research, Pine Mountain Georgia,USA June 2-6, B27. A. Zervaki, G.N. Haidemenopoulos and A. Giannakopoulos, On the Microhardness and Young s Modulus of Human Teeth, Proc. Int. Conference on Manufacturing Engineering (ICMEN), Thessaloniki, 1-3 October B28. P. C. Perdikaris, K. S. Papachristou, S. Houliara, A. D. Zervaki, S. A. Karamamos, G. N. Haidemenopoulos, Fatigue Behavior of High-Strength Steel Welded Plate, 6 th Panhellenic Conference on Metallic Constructions, Ioannina, Greece, 2-4 Οκτωβρίου Page 7 / 11

8 B29. A. D. Zervaki, G. N. Haidemenopoulos, V. Stergiou and S.G. Lambrakos, Prediction of Hardness Profile in the HAZ of Laser and Electron Beam Al welds, EUROMAT Glasgow, Sept. 7-10, B30. A. D. Zervaki, A. Th. Kermanidis, G. N. Haidemenopoulos and Sp. G. Pantelakis, Fatigue Behaviour of clad 6156 T4 Aluminum Laser Beam Welds after exposure to salt spray environment, EUROMAT Glasgow, Sept. 7-10, B31. Basis functions and parametrizations for inverse analysis of welding processes, A.D. Zervaki, G.N. Haidemenopoulos, V. Stergiou and S.G.Lambrakos, 9 th International Seminar on Numerical Analysis of Weldability, Graz-Seggau, Austria, Sept , B32. A.Δ. Zερβάκη, Γ.N. Χαϊδεμενόπουλος, Δ. Tσιουβάκας και A. Γιαννακόπουλος, Προσδιορισμός Σκληρότητας και Μέτρου Ελαστικότητας Αδαμαντίνης και Οδοντίνης στο Ανθρώπινο Δόντι, Κοινό Συνέδριο Τμήματος Έρευνας Ελλ. Ετ. Χειρουργικής και Τραυματολογίας & Ελληνικής Εταιρείας Βιοϋλικών, Αθήνα Νοεμβρίου B33. Γ.Ν. Χαιδεμενόπουλος, Κ.Ν. Μαλίζος, Α.Δ. Ζερβάκη, Διείσδυση ανθρώπινου οστού σε κοτύλη από πορώδες ταντάλιο, Κοινό Συνέδριο Τμήματος Έρευνας Ελλ. Ετ. Χειρουργικής και Τραυματολογίας & Ελληνικής Εταιρείας Βιοϋλικών, Αθήνα Νοεμβρίου Β34. A. D. Zervaki, A. Th. Kermanidis, G. N. Haidemenopoulos and Sp. G. Pantelakis, Fatigue failure investigation of pre-corroded and Laser-Welded Al-Cu-Mg-Ag alloy with different temper condition, International Conference on Advances in Welding Science and Technology for Construction, Energy and Transportation Systems (AWST-2010), July 2010, Istanbul TURKEY. Β35. Μ. Παπαδόπουλος, Σπ. Παντελάκης, Α. Ζερβάκη, Μηχανική συμπεριφορά κόπωσης αεροπορικού κράματος αλουμινίου 2195 με διαμήκη συγκόλληση δια τριβής και ανάμιξης, 4 ο Πανελλήνιο Συνέδριο Μεταλλικών Υλικών, ΑΠΘ, 4-5 Νοεμβρίου Β36. Γ.Ν. Χαιδεμενόπουλος, Κ.Ν. Μαλίζος, Α.Δ. Ζερβάκη, Διείσδυση ανθρώπινου οστού σε κοτύλη από πορώδες ταντάλιο, 4 ο Πανελλήνιο Συνέδριο Μεταλλικών Υλικών, ΑΠΘ, 4-5 Νοεμβρίου Β37. S. Stavropoulou, A. D. Zervaki, G. N. Haidemenopoulos, Hardness And Elastic Modulus Of Human Bone And Porous Tantalum Coating Biomaterial System, THE A COATINGS,, 3-5 October 2011, Thessaloniki, Greece. B38. A.D.Zervaki, G.N.Haidemenopoulos, M.P.Papadopoulos and S.G. Pantelakis, Butt FSW joints: Fatigue behavior of Al 2195 alloy, EUROMAT, 2011, Montpellier, FRANCE. B39. A.D.Zervaki, G.N.Haidemenopoulos, E. Hontzopoulos, F. Mangana, The effect of microstructure on the fracture behaviour of bimetallic Al-Cu laser spot welds in solar absorbers, 2 nd Int. Conf. Engineering Against Fracture (ICEAF II), Mykonos, Greece, June 22-24, B40. P. Siozos, A.D. Zervaki,H.Kamoutsi, G.N. Haidemenopoulos, D. Anglos, Tr. Magana, E. Hontzopoulos, Analysis of the optical emission of solar absorber Cu-Al and Al-Al pulsed laser welds, accepted for oral presentation in LIBS2012, Cairo Egypt. B41. A.D. Zervaki, A. Kermanidis, G. Haidemenopoulos, A. Chamos, S. Pantelakis, Influence of PWHT on the corrosion behavior and fatigue performance of 6xxx Al alloy laser beam welded joints, EUROCORR 2012, Instabul, Turkey. Page 8 / 11

9 Β42. G.N. Haidemenopoulos, A.D. Zervaki, H. Kamoutsi, E. Hontzopoulos, F. Mangana, Fracture behavior of bimetallic Al-Cu LBW joints, 3 r d Int. Conf. Engineering Against Fracture (ICEAF III), Kos Island, Greece, June 26-28, B43. A.D.Zervaki, G.N.Haidemenopoulos, A. Giannakopoulos, Rolling contact fatigue of rails, EUROMAT, 8-13 September 2013, Sevilla Spain. B44. Α.Δ. Zερβάκη, Ε. Καμούτση, Γ.Ν.Χαϊδεμενόπουλος, Π. Σιώζος, Δ. Άγγλος, Η. Χοντζόπουλος, Τ. Μαγγανά, Συγκολλήσεις laser Al-Cu για εφαρμογές σε ηλιακούς απορροφητές: Συσχέτιση φάσματος εκπομπής με τη μικροδομή, 5 ο Πανελλήνιο Συνέδριο Μεταλλικών Υλικών, 20-21Νοεμβρίου 2013, Παν. Θεσσαλίας, Βόλος. Β45. Μ. Παπαδόπουλος, Μ. Παγκράτη, Α. Μάντζαρης, Α. Ζερβάκη, Μηχανική συμπεριφορά κόπωσης διαβρωμένου χάλυβα οπλισμού σκυροδέματος, 5 ο Πανελλήνιο Συνέδριο Μεταλλικών Υλικών, 20-21Νοεμβρίου 2013, Παν. Θεσσαλίας, Βόλος. Β46. Β. Μόδας, A. Κερμανίδης, A. Ζερβάκη, Α. Χάμος, Σ. Παντελάκης, Συγκόλληση Laser (LBW) Αεροναυπηγικού Κράματος Al 6156: Μελέτη Συμπεριφοράς Κόπωσης Υπό Την Επίδραση Διάβρωσης, 5 ο Πανελλήνιο Συνέδριο Μεταλλικών Υλικών, Νοεμβρίου 2013, Παν. Θεσσαλίας, Βόλος. B47. A N. Chamos, A. D. Zervaki, G. N. Haidemenopoulos, S. G. Pantelakis, Evaluation of SCC of two AZ wrought magnesium alloys, 4th International Conference of Engineering Against Failure (ICEAF IV) June 2015, Skiathos, Greece B48. G.N. Haidemenopoulos, P. I. Sarafoglou, P. Christopoulos and A.D. Zervaki, Metallurgical Study of Initiation and Propagation of RCF Cracks in Rails, 4th International Conference of Engineering Against Failure (ICEAF IV) June 2015, Skiathos, Greece. B49. A.D.Zervaki, H. Kamoutsi, G.N.Haidemenopoulos and A.E.Giannakopoulos, Nitinol for Vascular Stent Applications: Fatigue Properties and Microstructure, accepted for oral presentation at EUROMAT 2015, Warsaw. B50. A. N. Chamos, A. D. Zervaki, G. N. Haidemenopoulos, S. G. Pantelakis, SCC of wrought magnesium alloys: Experimental study and microstructural evaluation, accepted for oral presentation at EUROMAT 2015, Warsaw. Research Projects Involved in following Research Projects : EUREKA EUROLASER EU205 "High power excimer lasers for industrial applications". ΕUREKA/EUROLASER EU 194 "Surface Treatment of Nickel alloys by using high power lasers BRITE P 2178 "Laser Treatment as a Tool for Tailoring the Surface Composition of Alloy Components for Engineering Applications" (in collaboration with FORTH/IESL., FORCE Institutes, MAN Technology GmbH, ALCATEL-ALSTHOM Recherché, AEA TECHNOLOGY). BRITE/EURAM BE 3327 "Laser based Chemical Vapor Deposition of Corrosion and Wear Resistant layers" (in collaboration with : PHILIPS CFT, SIEMENS, FORTH/IESL). BRITE/EURAM BE 3153 "Plasma and laser Induced Vapour deposition of Hermetic coatings on optical fibers" (in collaboration with THOMSON). BRITE/EURAM BE 3612 "Excimer laser processing of flexible materials" (in collaboration with EXITEC LTD, MOERNLYCKE). Page 9 / 11

10 ΒRITE/EURAM BE 4084 "Advanced Casting Techniques for Aerospace Applications" (in collaboration with CIRAL, Deutce Aerospace, Thyssen Feinguss, Technical University of Munchen, Technical University of Lisboa, University of Patras). PAVE 96 ΒΕ 169 "Development of Al-piston via the Squeeze Casting method" (in collaboration with SIELMAN S.A.). ΕPΕΤ II/170 "Laser Materials Processing (LASERMAT) " (in collaboration with University of Thessaly, Hellenic Shipyards, ELVO, ΙΝΤRΑΚΟΜ S,A,., HAI,S,A.. LIC S.A., VIOLEX-BIC, University of Patras). HYPER "Laser Welding of Al-alloys" PAVΕ 97BE270 "Development and Application of Laser Welding in Sections of Military Tank sengines (in collaboration with SIELMAN S.A.). PEPER 2000(211) "Experimental Study and Application of a 3D engraving method in transparent materials" (in collaboration with ΜΟΝΟΤΗΕΡΜ SA).. ALLUCOMP ( ) Multilayer composite materials of Al and Glass fibers (in collaboration with HAI, University of Patras). ΙΚΥDA ( ) " Cyclic deformation of TRIP steels" (in collaboration with IEHK/ RWTH) Cooperation ( ) «SunLaser: Οn line optimization of the production procedure of thernnal absorber systems (in ccollaboration with PRIME LaserTech, CERETETH) Cooperation ( ) DECORAIL: Detection, Εvaluation and Τotal Control of RCF in Rails (in collaboration with STASY S.A., NCSR Demokritos) ΙΚΥDA ( ) " : Design rules for third generation (3.G.) advanced high strength steels " (in collaboration with IEHK/ RWTH) University Excellence Program ( ): Fatigue of Materials Used in Vascular Surgery (in collaboration with the Dept. of Civil Engineering UTH, and the Faculty of Medicine/ School. of Health Sciences, UTH) Other Activities Member of the Organizing Committee, 1 st Panhellenic Conference on Metallic Materials, 29=30 Νοωεμβερ 2001,Volos, Greece. Member of Scientific Committee 3rd Panhellenic Conference on Metallic Materials, University of Patras, Patras, Greece, 6-7 December Session Chairman, 3 ο Panhellenic Conference on Metallic Materials, University of Patras, Patra, 6-7 December Session Chairman, Workshop «Combination of Matallic/Ceramic Materials in Technological Applications Departments of Materials Science, University of Ioannina, Greece, 3 April Session Chairman, 9 th International Seminar on Numerical Analysis of Weldability, Graz-Seggau, Austria, Sept , Member of the Scientific Committee 4 th Panhellenic Conference on Metallic Materials, Aristotle University of Thessaloniki, Greece, 4-5 November Member of the Organizing Committee, 2 nd International Conference of Engineering Against Fracture, ICEAF II,Mykonos June Co-chair and member of the Scientific Committee of the 6 th Panhellenic Conference on Metallic Materials, UTH, November Member of the Organizing Committee ICEAF IV,Skiathos, June Page 10 / 11

11 Co-chair and member of the Scientific Committee of the 6 th Panhellenic Conference on Metallic Materials, to be held at the University of Ioannina, 7-9 December Member of the Organizing Committee, JUNIOR EUROMAT, Lausanne June 2016 Chair, Managing Committee EUROMAT 2017, September 2017, Thessaloniki Greece. - Expert/Evaluator for research proposals Evaluator «Private Investment Incentives for Economic Development and Regional Convergence (law 3299/2004», GSRT, (2010) Evaluator/ Expert in the Greek-Turkish Technological Cooperation, GSRT (2013) Evaluator in COOPERATION projects, GSRT ( ) Reviewer in peer reviewed journals and Conferences Metallurgical and Materials Transactions B Journal of Materials Science Surface & Coatings Technology Journal of alloys and Compounds Journal of Structural Integrity Materials and Design Theoretical and Applied Fracture Mechanics Surface Topography: Metrology and Properties, IOP Publishing Measurement Science and Technology ICEAF biennial series of Conferences 12 th International Conference Protection & Restoration of the Environment Scientific Societies Secretary, Hellenic Metallurgical Society ( ). President, Hellenic Metallurgical Society ( ) Elected member EC FEMS ( ) Page 11 / 11