HSB Series. 1. Specifications DIN VDE 0110 Concerning clearance and creepage distances DIN VDE 0627 Connectors and plug devices
|
|
|
- Ἀλκμήνη Γερμανού
- 5 χρόνια πριν
- Προβολές:
Transcript
1 HSB Series 1. Specifications DIN VDE 0110 Concerning clearance and creepage distances DIN VDE 0627 Connectors and plug devices 2. Standards DIN EN DIN EN Approvals 169 All specifications subject to change. Consult TE Connectivity for latest design specifications.
2 HSB technical characteristics CURRENT CARRYING CAPACITY Specifications... DIN EN DIN EN Number of contacts... 6,12(2x6) + PE The current carrying is limited by maximum temperature of materials for inserts and contacts including terminals. Control and test procedures according to DIN IEC INSERTS Working current... 35A max (See current carrying capacity) Working voltage Conductor - ground V Conductor - conductor V Test voltage urms... 6KV Pollution degree... 3 Insulation resistance Ω Material... Polycarbonate Temperature range C C Flammability acc. to UL94... V0 Working voltage acc. to UL/CSA V Mechanical working life-mating cycles Working current CONTACTS Material... Copper alloy Surface... Hard silver-plated Contact resistance... 1mΩ Terminal... Screw terminal - mm mm 2 - AWG Tightening/test torque Nm Ambient temperature 1 Wire gauge: 4.0mm 2 2 Wire gauge: 6.0mm 2 HOODS, HOUSINGS Material... Die cast aluminium Surface...Powder-coated (RAL 7037) Locking element...stainless steel, steel-zinc plated Temperature range C C Degree of protection acc. to DIN IP AUTOMATION & CONTROL /// HEAVY DUTY CONNECTORS
3 HSB-006 inserts INSERTS FOR H16B HOOD/HOUSING 690V 35A 6+ Dimensions (mm) Type Part Number Male insert Female insert Crimp terminal (order crimp contacts separately) HSB-006-M T HSB-006-F T Contact arrangement view from termination side Panel cut out for inserts for use without hoods/housings 171 All specifications subject to change. Consult TE Connectivity for latest design specifications.
4 H16B with 2 levers on the hoods/housings POWDER-COATED, RAL 7037 Dimensions (mm) Metr. PG Type Part Number Hood: Side entry Low construction H16B-TS- H16B-TS- H16B-TS- H16B-TS- H16B-TS- T T T T T High construction H16B-TSH- H16B-TSH- H16B-TSH- H16B-TSH- H16B-TSH- T T T T T Hood: Top entry Low construction H16B-TG- H16B-TG- H16B-TG- H16B-TG- T T T T High construction H16B-TGH- H16B-TGH- H16B-TGH- H16B-TGH- H16B-TGH- T T T T T Cable-to-cable hood Low 62.5 Hight 74.5 Low construction High construction H16B-TBFS- H16B-TBFS- H16B-TBFS- H16B-TBFHS- H16B-TBFHS- H16B-TBFHS- H16B-TBFHS- H16B-TBFHS- T T T T T T T T Protection covers for hoods H16B-KDTP T Housing protection cover H16B-KDBP T AUTOMATION & CONTROL /// HEAVY DUTY CONNECTORS
5 H16B with 2 levers on the hoods/housings POWDER-COATED, RAL 7037 Dimensions (mm) Metr. PG Type Part Number Bulkhead mounted H16B-AGS T Surface mounted: Side entry Low 56 Hight 81 1 Side entry 1 Side entry 2 Side entry 2 Side entry H16B-SGRS- H16B-SGRS- H16B-SGRS-2 H16B-SGRS-2 H16B-SGRHS- H16B-SGRHS- H16B-SGRHS- H16B-SGRHS- H16B-SGRHS-2 H16B-SGRHS-2 H16B-SGRHS-2 H16B-SGRHS-2 T T T T T T T T T T T T Side entry housing with two levers Low 60 Hight 76 H16B-TSBS- H16B-TSBS- H16B-TSBS- H16B-TSBS- H16B-TSBHS- H16B-TSBHS- H16B-TSBHS- H16B-TSBHS- T T T T T T T T Top entry housing with two levers Low 60 Hight 76 H16B-TGBS- H16B-TGBS- H16B-TGBS- H16B-TGBS- H16B-TGBHS- H16B-TGBHS- H16B-TGBHS- H16B-TGBHS- T T T T T T T T Bulkhead mounted with 4 bolts With protection cover H16B-AD-BO T Construction A B C D F G H Low Hight Side entry 1 Side entry 2 Side entry 2 Side entry H16B-SDR-BO- H16B-SDR-BO- H16B-SDR-BO-2 H16B-SDR-BO-2 H16B-SDRH-BO- H16B-SDRH-BO- H16B-SDRH-BO- H16B-SDRH-BO- H16B-SDRH-BO-2 H16B-SDRH-BO-2 H16B-SDRH-BO-2 H16B-SDRH-BO-2 T T T T T T T T T T T T All specifications subject to change. Consult TE Connectivity for latest design specifications.
6 H16B with 1 lever on the hoods/housings POWDER-COATED, RAL 7037 Dimensions (mm) Metr. PG Type Part Number Hood: Side entry Low construction H16B-TS-RO- H16B-TS-RO- H16B-TS-RO- H16B-TS-RO- T T T T High construction H16B-TSH-RO- H16B-TSH-RO- H16B-TSH-RO- H16B-TSH-RO- H16B-TSH-RO- T T T T T Hood: Top entry Low construction H16B-TG-RO- H16B-TG-RO- H16B-TG-RO- H16B-TG-RO- T T T T High construction H16B-TGH-RO- H16B-TGH-RO- H16B-TGH-RO- H16B-TGH-RO- H16B-TGH-RO- T T T T T Cable-to-cable hood Low 62.5 Hight 74.5 H16B-TBF-LB- H16B-TBF-LB- H16B-TBF-LB- H16B-TBF-LB- H16B-TBFH-LB- H16B-TBFH-LB- H16B-TBFH-LB- H16B-TBFH-LB- H16B-TBFH-LB- T T T T T T T T T Protection covers for hoods H16B-KDTP-LB T AUTOMATION & CONTROL /// HEAVY DUTY CONNECTORS
7 H16B with 1 lever on the hoods/housings POWDER-COATED, RAL 7037 Dimensions (mm) Metr. PG Type Part Number Bulkhead mounted H16B-AG-LB T With protection cover H16B-AD-LB T Surface mounted: Side entry Low 56 Hight 81 1 Side entry 1 Side entry 2 Side entry 2 Side entry H16B-SGR-LB- H16B-SGR-LB- H16B-SGR-LB- H16B-SGR-LB- H16B-SGR-LB-2 H16B-SGR-LB-2 H16B-SGR-LB-2 H16B-SGR-LB-2 H16B-SGRH-LB- H16B-SGRH-LB- H16B-SGRH-LB- H16B-SGRH-LB- H16B-SGRH-LB-2 H16B-SGRH-LB-2 H16B-SGRH-LB-2 H16B-SGRH-LB-2 T T T T T T T T T T T T T T T T With protection cover Low 56 Hight 81 1 Side entry 1 Side entry 2 Side entry 2 Side entry H16B-SDR-LB- H16B-SDR-LB- H16B-SDR-LB- H16B-SDR-LB- H16B-SDR-LB-2 H16B-SDR-LB-2 H16B-SDR-LB-2 H16B-SDR-LB-2 H16B-SDRH-LB- H16B-SDRH-LB- H16B-SDRH-LB- H16B-SDRH-LB- H16B-SDRH-LB-2 H16B-SDRH-LB-2 H16B-SDRH-LB-2 H16B-SDRH-LB-2 T T T T T T T T T T T T T T T T All specifications subject to change. Consult TE Connectivity for latest design specifications.
8 HIP.16/40, HIP-K.16/40, EMV-K.16/40 housings HIP: Pressure-tight, silver-grey HIP-K: Housings corrosion-resistant, black, according to DIN IEC 68 T2-52 and ASTM B > 1000h EMV-K: Protection against electro-magnetic interference, pressure-tight, housings corrosion-resistant, black Pressure-tight up to 5 bar IP 68 / IP 69 K Description Metr. PG Type Part Number Hood: Side entry 29 HIP HIP.16/40.STS.1..G HIP.16/40.STS.1.29.G HIP.16/40.STS.1..G HIP-K HIP-K.16/40.STS.1.29.G HIP-K.16/40.STS.1..G EMV-K EMV-K.16/40.STS.1.29.G EMV-K.16/40.STS.1..G EMV-K.16/40.STS.1..G Hood: Top entry 29 HIP HIP.16/40.STO.1..G HIP.16/40.STO.1.29.G HIP.16/40.STO.1..G HIP-K HIP-K.16/40.STO.2..G HIP-K.16/40.STO.1.29.G HIP-K.16/40.STO.1..G EMV-K EMV-K.16/40.STO.1.29.G EMV-K.16/40.STO.1..G Surface mounted housing: Bottom entry 103 ø HIP HIP.16/40.AG Panel cut-out M4 HIP-K HIP-K.16/40.AG EMV-K EMV-K.16/40.AG Panel cut-out M6x HIP HIP.16/40.AG.M6 HIP-K HIP-K.16/40.AG.M M EMV-K EMV-K.16/40.AG.M AUTOMATION & CONTROL /// HEAVY DUTY CONNECTORS
9 HIP.16/40, HIP-K.16/40, EMV-K.16/40 housings HIP: Pressure-tight, silver-grey HIP-K: Housings corrosion-resistant, black, according to DIN IEC 68 T2-52 and ASTM B > 1000h EMV-K: Protection against electro-magnetic interference, pressure-tight, housings corrosion-resistant, black Pressure-tight up to 5 bar IP 68 / IP 69 K Description Metr. PG Type Part Number Surface mounted housing: Side entry HIP 2x 2x HIP.16/40.SG.1..G HIP.16/40.SG.2..G HIP.16/40.SG.2..G HIP-K 2x 2x HIP-K.16/40.SG.1..G HIP-K.16/40.SG.2..G HIP-K.16/40.SG.2..G EMV-K 2x 2x EMV-K.16/40.SG.1..Z EMV-K.16/40.SG.2..Z EMV-K.16/40.SG.2..G Protective covers for housings 19 M6x30 HIP HIP/EMV.16/40.SKB HIP-K HIP-K.16/40.SKB All specifications subject to change. Consult TE Connectivity for latest design specifications.
10 HSB-012 inserts INSERTS FOR H32B HOOD/HOUSING 690V 35A 12 (2x6)+ Dimensions (mm) Type Part Number Male insert Female insert Screw terminal HSB-006-M(1-6) HSB-006-M(7-12) T T HSB-006-F(1-6) HSB-006-F(7-12) T T Contact arrangement view from termination side Panel cut out for inserts for use without hoods/housings 178 AUTOMATION & CONTROL /// HEAVY DUTY CONNECTORS
11 H32B with 2 levers on the hoods/housings POWDER-COATED, RAL 7037 Dimensions (mm) Metr. PG Type Part Number Hood: Side entry H32B-TS- H32B-TS- H32B-TS- H32B-TS- T T T T Hood: Top entry M50 PG42 H32B-TG- H32B-TG- H32B-TG- H32B-TG-PG42 H32B-TG- H32B-TG- H32B-TG- H32B-TG-M50 T T T T T T T T Bulkhead mounted H32B-AG T Surface mounted: Side entry 1 Side entry 2 Side entry M50 M63 M50 M63 PG42 PG42 H32B-SGR- H32B-SGR- H32B-SGR-PG42 H32B-SGR- H32B-SGR- H32B-SGR-M50 H32B-SGR-M63 H32B-SGR-2 H32B-SGR-2 H32B-SGR-2PG42 H32B-SGR-2 H32B-SGR-2 H32B-SGR-2M50 H32B-SGR-2M63 T T T T T T T T T T T T T T Cable-to-cable hood M50 M63 PG42 H32B-TBF- H32B-TBF- H32B-TBF-PG42 H32B-TBF- H32B-TBF- H32B-TBF-M50 H32B-TBF-M63 T T T T T T T Protection covers for hoods H32B-KDB T All specifications subject to change. Consult TE Connectivity for latest design specifications.
12 H32B with 1 lever on the hoods/housings POWDER-COATED, RAL 7037 Dimensions (mm) Metr. PG Type Part Number Hood: Side entry H32B-TS-RO- H32B-TS-RO- H32B-TS-RO- H32B-TS-RO- T T T T Hood: Top entry M50 PG42 H32B-TG-RO- H32B-TG-RO- H32B-TG-RO- H32B-TG-RO-PG42 H32B-TG-RO- H32B-TG-RO- H32B-TG-RO- H32B-TG-RO-M50 T T T T T T T T Bulkhead mounted H32B-AG-LB T With protection cover H32B-AD-LB T Surface mounted: Side entry With protection cover 1 Side entry 1 Side entry 2 Side entry 2 Side entry H32B-SGR-LB- H32B-SGR-LB- H32B-SGR-LB- H32B-SGR-LB-2 H32B-SGR-LB-2 H32B-SGR-LB-2 H32B-SDR-LB- H32B-SDR-LB- H32B-SDR-LB- H32B-SDR-LB-2 H32B-SDR-LB-2 H32B-SDR-LB-2 T T T T T T T T T T T T AUTOMATION & CONTROL /// HEAVY DUTY CONNECTORS
Stamped contacts Crimp male contacts diameter 1,6 mm for wire gauge AWG silver plated Part No. VN (1) Contact Stamped contacts
Stamped contacts Crimp male contacts diameter 1,6 mm for wire gauge AWG - 16 silver plated VN 01 016 0002 ( Series Subseries Contacts Contact Stamped contacts Common Characteristics Contact diameter 1,6
SPECIFICATIONS... Pag. 2. WIRE SOLDER... Pag. 3. PCB SOLDER... Pag HIGH VOLTAGE PCB SOLDER... Pag. 6. RIGHT ANGLE PCB... Pag.
DIN 41618 & 41622 INDEX DIN 41618 SPECIFICATIONS.......................................................... Pag. 2 WIRE SOLDER............................................................ Pag. 3 PCB SOLDER.............................................................
BMA SERIES Subminiature Blind Mate Connectors
SERIES Subminiature Blind Mate Connectors FEATURES The blindmate connectors are designed for blindmate applications up to Ghz. They have a slide-on, non-locking interface which ensures frequent matings
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
C4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
![2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%](/thumbs/78/78109689.jpg "2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%")
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Bulletin 1489 UL489 Circuit Breakers
Bulletin 489 UL489 Circuit Breakers Tech Data 489-A Standard AC Circuit Breaker 489-D DC Circuit Breaker 489-A, AC Circuit Breakers 489-D, DC Circuit Breakers Bulletin 489-A Industrial Circuit Breaker
Mechanical Properties. Electical conductivity 3) < 0.5 mω non conductive < 0.5 mω 1) 2)
CABE CAMPS Metallic Cable Clamp A MS 3420 Bushing Shell material: A - Aluminum Alloy B - Copper Alloy C - Stainless Steel Surface treatment: A - Black Zinc-Cobalt C - Black Polyurethane Varnished E - Electro
SMB SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50Ω impedance for applications up to 4GHz. Suited for cables with dielectric diameters of up to 1.5mm. The connectors
DEUTSCH 983 Series Filter Connectors MIL-DTL SERIES III
DEUTSCH 93 Series Connectors are MIL-DTL-3723 Series III style connectors meeting ESC, ESC15, and EN2997 standards. With medium-density insert arrangements, fine threaded coupling, and corrosion resistant
0.635mm Pitch Board to Board Docking Connector. Lead-Free Compliance
.635mm Pitch Board to Board Docking Connector Lead-Free Compliance MINIDOCK SERIES MINIDOCK SERIES Features Specifications Application.635mm Pitch Connector protected by Diecasted Zinc Alloy Metal Shell
Specification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)
High CV-value Long Life > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life Optimized designs available on request RoHS Compliant application Basic design Smoothing, energy storage,
Screened electronic cable LiYCY
Screened electronic cable LiYCY conductor material: bare copper conductor construction: fine stranded, class 5 insulation: PVC screen: Cu-braiding screen over strand: Cu-braid, tinned screen coverage:
MSN DESK TOP ENCLOSURE WITH STAND / CARRYING HANDLE
MSN SERIES MSN DESK TOP ENCLOSURE WITH STAND / CARRYING HANDLE W H FEATURE Available in 176 sizes. Stand / carrying handle can be adjusted in 30 degree. Maximum load is kg. There are no ventilation hole
Terminal Contact UL Insulation Designation (provided with) style form system approval Flux tight
eatures A miniature PCB Power Relay. form A contact configuration with quick terminal type. 5KV dielectric strength, K surge voltage between coils to contact. Ideal for high rating Home Appliances of heating
CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Type 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
Aluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
SMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008
SMD Wire Wound Ferrite Chip Inductors - LS Series LS Series LS Series is the newest in open type ferrite wire wound chip inductors. The wire wound ferrite construction supports higher SRF, lower DCR and
MS SERIES MS DESK TOP ENCLOSURE APPLICATION EXAMPLE FEATURE. Measuring instruments. Power supply equipments
MS SERIES MS DESK TOP ENCLOSURE FEATURE Available in 176 sizes. Screws are not appeared on the surface. Usable as rack mount case with optinal mounting bracket. There are no ventilation hole for cover
Control cable YSLY-JZ/-JB/-OZ/-OB
Control cable YSLY-JZ/-JB/-OZ/-OB conductor material: bare copper conductor construction: fine stranded, class 5 insulation: PVC TI1 stranding unit: core sheathing material: PVC TM2 colour of outer sheath:
S /5000 BTU/Hr. 1000/1500 Watt
763.576.32 SPEC-168 D763.422.2211 COOLING SEALED ENCLOSURE COOLING AIR CONDITIONERS Sealed Enclosure Cooling Air Conditioners SPECTRACOOL SLIM FIT INDOOR S6 1/17 BTU/Hr. 3/5 Watt S1 34/5 BTU/Hr. 1/15 Watt
Screened electronic cable LiYCY
Screened electronic cable LiYCY Conductor material: bare copper Conductor class: class 5 = fine stranded Insulation: PVC Screen: copper braid, tinned Screen coverage: 70 % Sheathing material: PVC Flame-retardant:
CMPTER 2.92MM CONNECTORS. ... A Vital Part of Connection World. Receptacles With Accepts Pin Receptacles, Metal Through The Wall
... A Vital Part of Connection World Receptacles With Accepts Pin Receptacles, Metal Through The Wall Receptacles, Insulator Through The Wall Receptacles, Air ine Through The Wall PCB Connectors 2.92MM
FRNC power cable Cu/XLPE/ LSZH/SWA/LSZH acc. to BS 6724
FRNC power cable Cu/XLPE/ LSZH/SWA/LSZH acc. to BS 6724 Conductor material: copper, bare Conductor class: class 2 = stranded Insulation: XLPE Material inner sheath: halogen-free Armour: round steel wire,
Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction
TS-HA/HB Series 105 C, 3000 hours Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature:
38BXCS STANDARD RACK MODEL. DCS Input/Output Relay Card Series MODEL & SUFFIX CODE SELECTION 38BXCS INSTALLATION ORDERING INFORMATION RELATED PRODUCTS
DCS Input/Output Relay Card Series STANDARD RACK MODEL 38BXCS MODEL & SUFFIX CODE SELECTION 38BXCS MODEL CONNECTOR Y1 :Yokogawa KS2 cable use Y2 :Yokogawa KS9 cable use Y6 :Yokogawa FA-M3/F3XD32-3N use
MMCX SERIES Microminiature Coaxial Connectors
SERIES Microminiature Coaxial Connectors FEATURES connectors are smaller than MCX connectors and are used from DC up to 6 GHz in applications where a tiny size is crucial. INTERFACE MATING DIMENSIONS PLUG:
Data/LAN Cables Cat 6 F/UTP PVC
Data/LAN Cables Cat 6 F/UTP PVC RoHS REACH Application 10 BASE-T (IEEE 802.3) Ethernet. 100 BASE-T (IEEE 802.3u) Fast Ethernet 100 VG-AnyLAN (IEEE 802.12). 4/6 Mbps Token Ring (IEEE 802.5) 100 Mbps CDDI.
Aluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Sunlord. Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) 2R2 SPH
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Metal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
A1253 SERIES. Specifications. Assembly layout. Ordering code. 1.25mm pitch wire to board connector A1253 T P E -A A1253 WR A SF 05P D01 A1253 H A 05P
Specifications Current rating: 1A AC,DC Voltage rating: 150V AC,DC Temperature range: -25 C ~ +85 C Contact resistance: 30mΩ Max. Insulation resistance: 500MΩ Min. Withstanding voltage: 500V AC/minute
Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
CMPTER SMA CONNECTORS. ... A Vital Part of Connection World
... A Vital Part of Connection World Receptacles With Accepts Pin Receptacles Metal Through The Wall Receptacles Insulator Through The wall Receptacles Air ine Through The wall Receptacles With Tap Receptacles
3M-Series Miniature Pushbutton Switches
Carling Technologies MN- Snap-Action Miniature Pushbutton Switch MS- Sealed Snap-Action Miniature Pushbutton Switch Specifications Contact Rating......... refer to ordering scheme Electrical Life..........
NPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
Features. Terminal Contact Enclosure style style form Open type Dust cover Ears on cover Antirotation-tab Ears on top
SONG CHUN Features 20/2 general purpose Power Relays. SPDT, DPDT, TPDT contact configurations. DC & C coils are both available. Optional for flange covers, tapped core w/anti-rotation tab, indicator lamp,
Return Line Filters Type RTF10/25
Technical Data Type RTF1/25 Product Description Technical Data Construction Materials Filter head: Sealings: Aluminum NR (una-n ) Other sealing materials on request Options and Accessories Valve Clogging
NO: 250 / 3 NC: 250 / 2 NO: 250 / 5 NC: 250 / 2 to IEC/EN DC 13 5) NO: 24 / 2 NC: 24 / 2 at 0.1 Hz DC 13 5) DC V/A
PCB relays Safety relays monostable OA 601, OA 60, OA 603 OA 601 OA 60 OA 603 Acc. to DIN EN 00, DIN EN 61810-1, DIN EN 60664-1 With forcibly guided contacts Clearance and creepage distances, contact-coil
Sunlord Specifications subject to change without notice. Please check our website for latest information. Revised 2018/04/15
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Heat exchanger. Type WT. For the reheating of airflows in rectangular ducting PD WT 1. 03/2017 DE/en
X X testregistrierung Heat exchanger Type For the reheating of airflows in rectangular ducting Rectangular hot water heat exchanger for the reheating of airflows, suitable for VAV terminal units Type TVR,
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:
![± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:](/thumbs/85/91419422.jpg "± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:")
TS-UP Series 85 C, 3000 hours Compact size for general purpose and industrial applications 2 and 3 pin versions available 20mm lengths for low profile applications RoHS Compliant Rated Working Voltage:
Metal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
PEH C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life
PEH 169 85 C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life APPLICATION BASIC DESIGN Smoothing, energy storage, or pulse operation in telecommunication
D-Sub Connectors. Catalog E /08 Edition 2
www.erni.com Catalog E 074573 11/08 Edition 2 www.erni.com www.erni.com Catalog E 074573 11/08 Edition 2 www.erni.com Table of Contents General..............................................................................................2
Metal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication
4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
Return Line Filters. Return Line Filters Type RTF10/25. C Technology. Filtration. Product Description. Technical Data. Options and Accessories
Return Line Filters Return Line Filters Type RTF1/25 Product Description Technical Data Options and Accessories Construction Materials Valve Clogging Indicators Port Connection Flow Rating Operating Pressure
Pipe E235N (St 37.4 NBK) phosphated and oiled
Pipe E235N (St 37.4 NBK) phosphated and oiled Working Pressure Burst Pressure 4X1ST37.4NBK* 4 x 1.0 3201041000 397 459 555 2600 0.07 6X1ST37.4NBK 6 x 1.0 3201061000 252 289 394 1560 0.12 6X1.5ST37.4NBK
Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
RSDW08 & RDDW08 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (Typ.) CAPACITOR LOAD (MAX.) RSDW08F-03 344mA 3.3V 2000mA 80% 2000μF RSDW08F-05
2010 ASEC INDUSTRIES PTE LTD
2010 ASECINDUSTRIESPTELTD No.1UpperAljuniedLink, #0802,JooSengWarehouseBlockA,Singapore367901 TEL:(65)63834368/62842051 FAX:(65)63834369 Email:shirleytan@asec.com.sg Website:www.asec.com.sg [SWITCHESCATALOGUE]
Metal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
TIME SWITCHES AND TWILIGHT SWITCHES
W ANALOG DIN-RAIL TIME SWITCH QUARTZ, SERIES TEMPUS ANALOG 244 W SCHRACK-INFO Analogue time switch 1 channel Daily program With power reserve (NiMH rechargeable battery) Synchronised with mains Shortest
NPIS Shielded Power Inductors
FEATURES SHIELDED POWER INDUCTOR ULTRA LOW PROFILE (1.0 ~ 4.5mm MAX. HEIGHT) SURFACE MOUNTABLE CONSTRUCTION INDUCTANCE VALUES UP TO 220µH TAPED AND REELED FOR AUTOMATIC INSERTION CHARACTERISTICS Case Size
NTC Thermistor:SCK Series
Features. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φmm:-40~+70
7AAC63-90 SINGLE-PHASE MOTORS PERMANENT CAPACITOR 7AACC SINGLE-PHASE MOTORS CAP START - CAP RUN. squirrel cage induction motors 7AACC63-100
7AAC63-90 SINGLE-PHASE MOTORS PERMANENT CAPACITOR squirrel cage induction motors 7AACC63-100 SINGLE-PHASE MOTORS CAP START - CAP RUN Electric Motors Division WELLINGBOROUGH 7AACC63-100 EXICO LIMITED, 16
SC Style Optical Connector
SC Style Optical Connector OUTLINE SC connector is a push/pull style connector developed by NTT. The square, snap-in connector latches with a simple push-pull motion and is keyed. It is frequently used
± 20% ± 5% ± 10% RENCO ELECTRONICS, INC.
RL15 RL16, RL17, RL18 MINIINDUCTORS CONFORMALLY COATED MARKING The nominal inductance is marked by a color code as listed in the table below. Color Black Brown Red Orange Yellow Green Blue Purple Grey
Carbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
MIL-C-5015 Connector Series
ircular onnector --5015 onnector eries K15-228- type connector K15-228- series circular connectors are used extensively in line connections between electrical equipment,various instruments and meters.
Safety Barriers. 6 Safety Barriers KP00 III en Preferred products in stock or available at short notice
5-- KP III en Contents Single-Channel INTRINSPAK 9 8 Dual-Channel INTRINSPAK 9 with Electronic Current Limitation INTRINSPAK 94 You will find further information on the Internet www.stahl.de General Information
DEUTSCH RR Series Filter Connectors MIL-DTL SERIES 2
DUTSCH ilter Connectors DUTSCH RR Series ilter Connectors MIL-DTL-2642 SRIS 2 DUTSCH RR Series connectors are medium-density, MIL-DTL-2642 Series 2 circular connectors using a bayonet coupling with visible
High pressure centrifugal pumps
High pressure centrifugal pumps Wilo-Multivert MVI (North America) Series description H [ft] 3 1 MVI 1 1 1 MVI 1 MVI 3 MVI MVI 1 1 Q [m³/h] Wilo-Multivert-MVI Hz - North America Q [US gpm] H [m] 1 1 1
Shunts & Multiple Shunts. Stamped Contact DIP IC Sockets. PLCC Sockets. Jumpers. DDR DIMM Sockets SOCKETS. System CS - Technical Specifications
System - Technical Specifications Shunts & Multiple Shunts Stamped Contact DIP IC Sockets ~ ~ PLCC Sockets ~ Jumpers ~ DDR DIMM Sockets Electrical: Current/Voltage rating: 0.5A/25VAC for Single Type 0.3A/25VAC
Anti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
Accu-Guard II. SMD Thin-Film Fuse ELECTRICAL SPECIFICATIONS
Accu-Guard II is a version of Accu-Guard fuses for a wider range of current and voltage ratings. Con struct ed on alumina substrates, Accu-Guard II fuses display superior electrical, mechanical and en
Interference Suppression Capacitor
MOLDED BOX CONSTRUCTION, SUPPRESSION CAPACITOR, RADIAL LEAD FEATURES UL, CSA, VDE, CQC, CE, ENEC APPROVALS X2 SAFETY CAP CLASSIFICATION FOR USE IN ACROSS-THE-LINE APPLICATIONS METALLIZED POLYPROPYLENE
E62 AC Series Features
E62 AC Features Perfect for non-sinusoidal s and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated overpressure
Current Sense Metal Strip Resistors (CSMS Series)
Features: Range: 1mΩ to 100mΩ Low TCR as low as 75PPM High power rating Custom Values available RoHS Compliant and Halogen Free Operating Temperature: -55 C to +170 C Part Number Structure CSMS 0805 -
No Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
Melf Carbon Film Resistor MMC Series
Melf Resistor Melf Carbon Film Resistor MMC Series Coating color: Beige Features - Tolerance up to ±2%. - Wide resistance range:1ω to 10MΩ. Type Dimension TYPE L D C S 0102 2.00±0.10 1.30±0.10 0.55±0.10
SMD AVR AVR-M AVRL. Variable resistor. 2 Zener diode (1/10) RoHS / / j9c11_avr.fm. RoHS EU Directive 2002/95/EC PBB PBDE
(1/1) SMD RoHS AVR AVR-M AVRL Variable resistor 2Zener diode Current(A) Positive direction 1 1 1 2 1 3 1 4 1 5 Zener diode /Vz:6.8V Chip varistor /V1mA:12V 2 Zener Diodes A capacitance content 18 14 1
+85 C General Purpose Miniature Aluminum Capacitors
+85 C General Purpose Miniature Aluminum Capacitors Features- Increased CV Efficiency Non Polar Design Available (Special Order) General Specifications- Operating Temperature: -40 to +85 C Voltage Range:
ACTORS IEC CONT Ex9C
IEC CONTCTORS Ex9C Ex9C Product Overview Features C-3 contactor ratings from 630 and C-1 contactor ratings to 800 voltages from 24~600, 50/60 Hz Full Non-Reversing (FVNR) and Full Reversing (FVR) 5 k @
Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
First Sensor Quad APD Data Sheet Part Description QA TO Order #
Responsivity (/W) First Sensor Quad PD Data Sheet Features Description pplication Pulsed 16 nm laser detection RoHS 211/65/EU Light source positioning Laser alignment ø mm total active area Segmented in
Siam Pacific Electric Wire & Cable Co., Ltd.
PRODUCT AND APPLICATIONS OF ENAMELED WIRE TYPE COMMERCIAL NAME INSULATION TYPE BASE COATED OVER COATED TOP COATED THERMAL CLASS ( C) WIRE RANGE (S) APPLICATIONS PVF POLYVINYL FORMAL - - 105 SWG 9 ~ SWG
NTC Thermistor:SCK Series
Features. RoHS & HF compliant 2. Body size: Ф5mm ~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70
D-SUB SOLDER TYPE ORDER INFORMATION. Bestell Code/Order Code: DST (Stecker / Male) L DBU (Buchse / Female) L
D-SUB SOLDER TYPE DST (Stecker / Male) - - - L DBU (Buchse / Female) - - - L = Polzahl / No. of contacts (9,15,25,37) = Isolierkörper weiß / Insulator white L = Lötkelch / Solder Type 1 D-SUB P.C.B. STRAIGHT
Transient Voltage Suppressor
Transient Suppressor Features Glass passivated junction Low incremental surge resistance, excellent clamping capability Underwriters Laboratory Recognition under UL standard for safety 497B: Isolated Loop
Polymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
Thin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
- CONSTRUCTIONS 300 SECTIONAL VIEW MATRIX SECTIONAL VIEW MATRIX CONSTRUCTIONS 302 CONSTRUCTIONS 303 MECHANICAL SEAL 304
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 2-3-4-5 impellers ) 204 PERFORMANCE CURVE 3 ( 6-7-8-9 impellers ) 205
CHAROONG THAI WIRE & CABLE PUBLIC COMPANY LIMITED
CHAROONG THAI WIRE & CABLE PUBLIC COMPANY LIMITED CABLE TYPE : CTW-CVVS 00 V ( STRANDED CONDUCTOR ) : 00 V 70 C PVC INSULATED AND SHEATHED CONTROL CABLE WITH SHIELD TAPE PAGE 1/ APPLICATION Supervisory
Metal Film Flame-Proof Resistors
Features -Low Noise -Low TCR from ±15~100PPM/ -High Precision from ±0.1%~1% -Complete Flameproof Construction UL-1412. -Coating meets UL94V-0 Applications -Telecommunication -Medical Equipment -Consumer
DLG Series. Lowara SPECIFICATIONS APPLICATIONS ACCESSORIES MATERIALS. General Catalogue
DLG Series Submersible pumps with open impeller with grinder assembly for pumping sewage, liquids, wastewater in general and industrial sludge, draining of flooded excavations. SPECIFICATIONS Delivery:
E62-TAB AC Series Features
NEW! E62-TAB AC Series Features Perfect for non-sinusoidal voltages and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated
MAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
FT-63 SINGLE TURN CERMET TRIMMERS. F T E T V 5 k Ω ( ) FEATURES PART NUMBER DESIGNATION
SINGLE TURN FT-6 RoHS compliant INTERNAL STRUCTURE 4 5 8 6 FEATURES 4 5 6 8 Part name Housing Rotor Wiper O ring Resistive element Terminal pin Adhesive Base element Electrode Material PBT Polybutyleneterephthalate
15W DIN Rail Type DC-DC Converter. DDR-15 s e r i e s. File Name:DDR-15-SPEC
DIN Rail Type DC-DC Converter ± : DIN Rail Type DC-DC Converter SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC (Note 5) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER
Lowara SPECIFICATIONS
SH Series Centrifugal pumps entirely made of AISI 36 stainless steel according to EN 733 (ex DIN 24255). Designed to pump hot, cold and moderately aggressive liquids. Available versions: SHE Close-coupled
HORIZONTAL MULTISTAGE CENTRIFUGAL ELECTRIC PUMPS in AISI 304
Horizontal multistage centrifugal electric pumps stainless steel. APPLICATIONS Industrial washing Pressure boosting units Industrial plants Distribution and treatment of water Heating and air conditioning
Specifications C2504 SERIES. Standards E E326732
Specifications Current rating:3 C,DC Voltage rating:250v C,DC Temperature range:-40 C~+105 C Contact resistance:20mω Max. Insulation resistance:1000mω Min. Withstanding voltage:1000v C/minute *Compliant