Aluminum Electrolytic Capacitors (Large Can Type)
|
|
- Σάρρα Αξιώτης
- 5 χρόνια πριν
- Προβολές:
Transcript
1 Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction Explanation of Part Numbers E C E S Product Code Shape ECES Standard terminal type ECEC Short terminal type Working Voltage Code U Series Code N. Capacitance Code Case Code ød (mm) L (mm) D J Q E K R X G M T Y H N U Z Specifications Operating temperature range Rated working voltage Nominal capacitance range Capacitance tolerance DC leakage current Ripple current Endurance Shelf life 40 to +85 C 16 to 2 V DC 120 to 47,000 µf 25 to +85 C 385 to 4 V DC 33 to 390 µf I = 0.01 CV [µa] CV 1,000,000 for 16 ~ 100V I = 3 CV [µa] CV > 1,000,000 for 16 ~ 100 V and all items of 160 ~ 4V Leakage current shall be measured after 5 minutes application of rated working voltage at +20 C. (C = nominal capacitance in µf, V = rated working voltage in V) (V) Refer to standard products table (120 Hz, +105 C) Correction factor for frequency Frequency [Hz] 16 ~ 100V 160 ~ 4V Test conditions Duration Ambient temperature Applied voltage Leakage current Capacitance change Duration Ambient temperature Applied voltage Post-test requirements at +20 C initial specified value ± 20% of initial measured value 1% of initial specified value Test conditions (Post-test requirements at +20 C. Same limits as Endurance.) 1,000 hours +85 C (none) ±20% ~ k ,000 hours +85 C DC voltage with maximum permissible ripple current specified at +85 C ( rated working voltage) Pre-treatment for measurements: Measurements shall be conducted after application of DC working voltage for 30 minutes 4 10k k
2 Expected Life for and Ambient Stress Aluminum Electrolytic Capacitors/TS-U Calculation Formula The life of aluminum electrolytic capacitors is highly affected by applied ripple current and ambient temperature. In general, the relation between life time, ripple current, and ambient temperature is known as: Where: I: Ripple current to be applied to the capacitor T C (120 Hz [A rms] I P : Specified maximum permissible ripple current at 120 Hz, +85 C [A rms] L: Expected life at T C [h] L 0 : Specified life (series TS-U: 2,000 hours) [h] T: Ambient temperature [ C] T 0 : Hot spot temperature in the capacitor element = [maximum operating temperature] + [ t at maximum ambient temperature] = [maximum temperature (series TS-U: +90 C)] [ C] t: Temperature rise at constant current flow of maximum permissible ripple current value specified at +85 C (see graph1 t vs T) [ C] Conditions: (I/I P ) 2 2 times Expected Life (calculated on the basis of specified life under high temperature loading) 100 Expected life [x 10 3 h] C +65 C +85 C Ripple current duty factor = I/IP Dimensions in mm (not to scale) Polarity bar Vinyl sleeve (10.0) ø2.0± ±0.1 Terminal _ max.* 2.0 max Vent (4.0) 6.3± ± ± ±0.2 ød + 1 max. ød * Short terminal type L + 2 max. 6.3 ± 1.0 * (4.0 ± 0.5) PC Board Mounting Holes 44
3 Case Size (code) 16V 35V 63V Ripple Current* Case size 4, x25 6, x30 25x25 10, x40 25x30 30x25 15, x 25x40 30x30 22, x 30x40 35x30 33, x 35x40 47, , x25 3, x30 25x25 4, x40 25xz30 30x25 6, x 25x40 30x30 10, x 30x40 35x30 15, x 35x40 22, x 1, x25 1, x30 25x25 2, x40 25x30 30x25 3, x 25x40 30x30 4, x 30x40 35x30 6, x 35x40 10, x 100V 200V x x30 25x25 1, x40 25x30 30x25 1, x 22x40 30x30 2, x 30x40 35x30 3, x 35x40 4, x x x30 35x x40 25x30 30x x 25x40 30x x 30x40 35x30 1, x 35x40 1, x 385/400V x x30 25x x40 25x30 30x x 25x40 30x x 30x40 35x x 35x x (code) 25V Ripple Current* Case size 3, x25 4, x30 25x25 6, x40 25x30 30x25 10, x 25x40 30x30 15, x 30x40 35x30 22, x 35x40 33, x V 1,0 1,20 22x25 2, xz30 25x25 3, x40 25x30 30x25 4, x 25x40 30x30 6, x 30x40 35x30 10, x 35x40 15, x 80V x25 1, x30 25x25 1, x40 25x30 30x25 2, x 25x40 30x30 3, x 30x40 35x30 4, x 35x40 6, x 160V x x30 25x x40 25x30 30x x 25x40 30x x 30x40 35x30 1, x 35x40 1, x 2V x x30 25x x40 25x30 30x x 25x40 3x x30 30x40 35x x 35x40 1, x 4V 33 22x x30 25x x40 25x30 30x x 25x40 30x x 30x40 35x x 35x x * Ripple current: [A] rms at 120 Hz, +85 C Note: When capacitors of ø are mounted to P.C.B., reinforce them with supplementary support or adhesives. (Avoid using adhesives including halogenated composition.) 45
4 Standard Products Case Size (+20 C/5 min) max. [A] rms max. (120 Hz/+85 C, 2000h) 4,700 ECES1CU472D ,800 ECES1CU682E ECES1CU682J ECES1CU103G 10,000 ECES1CU103K ECES1CU103Q ECES1CU153H 15,000 ECES1CU153M ECES1CU153R ECES1CU223N 22,000 ECES1CU223T ECES1CU223X ,000 ECES1CU333U ECES1CU333Y ,000 ECES1CU473Z ,300 ECES1EU332D ,700 ECES1EU472E ECES1EU472J ECES1EU682G 6, ECES1EU682K ECES1EU682Q ECES1EU103H 10,000 ECES1EU103M ECES1EU103R ECES1EU153N 15, ECES1EU153T ECES1EU153X 22,000 ECES1EU223U ECES1EU223Y ,000 ECES1EU333Z ,200 ECES1VU222D ,300 ECES1VU332E ECES1VU332J ECES1VU472G 4, ECES1VU472K ECES1VU472Q ECES1VU682H 6,800 ECES1VU682M ECES1VU682R ECES1VU103N 10, ECES1VU103T ECES1VU103X 15,000 ECES1VU153U ECES1VU153Y ,000 ECES1VU223Z ,800 ECES1HU152D ,000 ECES1HU222E ,300 4,700 ECES1HU222J ECES1HU332G ECES1HU332K ECES1HU332Q ECES1HU472H ECES1HU472M ECES1HU472R
5 Standard Products (cont d) Case Size (+20 C/5 min) max. [A] rms max. (120 Hz/+85 C, 2000h) ECES1HU682N 6,800 ECES1HU682T ECES1HU682X 10,000 ECES1HU103U ECES1HU103Y ,000 ECES1HU153Z ,000 ECES1JU102D ,0 ECES1JU152E ECES1JU152J ECES1JU222G 2, ECES1JU222K ECES1JU222Q ECES1JU332H 3,300 ECES1JU332M ECES1JU332R ECES1JU472N 4,700 ECES1JU472T ECES1JU472X 6,800 ECES1JU682U ECES1JU682Y ,000 ECES1JU103Z ECES1KU681D ,000 ECES1KU102E ECES1KU102J ECES1KU152G 1, ECES1KU152K ECES1KU152Q ECES1KU222H 2, ECES1KU222M ECES1KU222R ECES1KU332N 3, ECES1KU332T ECES1KU332X 4,700 ECES1KU472U ECES1KU472Y ,800 ECES1KU682Z ECES2AU471D ECES2AU681E ECES2AU681J ECES2AU102G 1, ECES2AU102K ECES2AU102Q 30 xz 25 ECES2AU152H 1,0 ECES2AU152M ECES2AU152R ECES2AU222N 2,200 ECES2AU222T ECES2AU222X 3,300 ECES2AU332U ECES2AU332Y ,700 ECES2AU472Z
6 Standard Products (cont d) Case Size (+20 C/5 min) max. [A] rms max. (120 Hz/+85 C, 2000h) 180 ECES2CU181D ECES2CU271E ECES2CU271J ECES2CU391G 390 ECES2CU391K ECES2CU391Q ECES2CU561H 560 ECES2CU561M ECES2CU561R ECES2CU821N 820 ECES2CU821T ECES2CU821X 1,200 ECES2CU122U ECES2CU122Y ,0 ECES2CU152Z ECES2DU151D ECES2DU221E ECES2DU221J ECES2DU331G 330 ECES2DU331K ECES2DU331Q ECES2DU471H 470 ECES2DU471M ECES2DU471R ECES2DU681N 680 ECES2DU681T ECES2DU681X 1,000 ECES2DU102U ECES2DU102Y ,200 ECES2DU122Z ECES2EU121D ECES2EU151E ECES2EU151J ECES2EU221G 220 ECES2EU221K ECES2EU221Q ECES2EU331H 330 ECES2EU331M ECES2EU331R ECES2EU471N 470 ECES2EU471T ECES2EU471X 680 ECES2EU681U ECES2EU681Y ,000 ECES2EU102Z
7 Standard Products (cont d) *400 4 Case Size (+20 C/5 min) [A] rms max. max. (120 Hz/+85 C, 2000h) 47 ECES2GU470D ECES2GU680E ECES2GU680J ECES2GU101G 100 ECES2GU101K ECES2GU101Q ECES2GU151H ECES2GU151M ECES2GU151R ECES2GU221N ECES2GU221T ECES2GU221X 270 ECES2GU271U ECES2GU271Y ECES2GU391Z ECES2WU330D ECES2WU470E ECES2WU470J ECES2WU680G ECES2WU680K ECES2WU680Q ECES2WU101H ECES2WU101M ECES2WU101R ECES2WU151N 1 ECES2WU151T ECES2WU151X 220 ECES2WU221U ECES2WU221Y ECES2WU331Z * 385 is available on request with same specifications ( ECES2TU ). 49
Aluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Διαβάστε περισσότεραLong 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction
TS-HA/HB Series 105 C, 3000 hours Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature:
Διαβάστε περισσότερα± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:
TS-UP Series 85 C, 3000 hours Compact size for general purpose and industrial applications 2 and 3 pin versions available 20mm lengths for low profile applications RoHS Compliant Rated Working Voltage:
Διαβάστε περισσότερα+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
Διαβάστε περισσότερα+85 C Screw Terminal Aluminum Electrolytic Capacitors. For filtering applications. Capacitance change Dissipation factor Leakage current
For filtering applications FEATURES High ripple current High reiability range: 270µF to 680,000µF Voltage range: 6.3 to 450 SPECIFICATIONS Tolerance ±20% at 120 Hz, 25 C Operating Temperature Range Dissipation
Διαβάστε περισσότεραLS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
Διαβάστε περισσότεραSummary of Specifications
Snap Mount Large High CV High Ripple 85 C Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life for the series is 2,000 hours
Διαβάστε περισσότεραMINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. Characteristics. Leakage Current(MAX) I=Leakage Current(µA) C=Nominal Capacitance(µF) V=Rated Voltage(V)
SERIES 5 C Long Life. Low impedance. (Rated Voltage 6.3~V.DC) FEATURES Load Life : 5 C 4~hours. Low impedance at khz with selected materials. SPECIFICATIONS Items Operating Temperature Range Rated Voltage
Διαβάστε περισσότεραSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Διαβάστε περισσότεραSmaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
Διαβάστε περισσότεραRJJ Miniature Aluminum Electrolytic Capacitors RJJ. Series RJJ High-Frequency, Low Impedance, Standard Type. Radial Type
352 Elna Corrections 80-95 /6/98 :55 AM Page Miniature Aluminum Electrolytic Capacitors Series High-Frequency, Low Impedance, Standard Type For high reliability applications, Environmentally safe. High-frequency,
Διαβάστε περισσότεραCountry of Origin. Japan Malaysia China
Radial Lead Type Series: FC Type :A n Features Endurance : 5 C 00 h to 5000 h Low impedance Country of Origin Japan Malaysia China n Specifications Category temp. range Rated W.V. Range Nominal Cap. Range
Διαβάστε περισσότεραAt +105 C no voltage applied after 1,000 hours and then being stabilized at +20 C the capacitors shall meet the following limits Shelf Life
+15 C, High Ripple Current (), Low Impendence () FEATURES ì ì Low impedance for high frequency. Life time: 1,~4, hours at 15 C. SPECIFICATIONS Miniature Aluminum Electrolytic Capacitors Item Performance
Διαβάστε περισσότερα+85 C General Purpose Radial Lead Aluminum Electrolytic Capacitors
+85 C General Purpose Radial Lead Aluminum Electrolytic acitors Applications Filtering Coupling Bypass Features Standard case sizes RoHS compliant Multiple case sizes Lead free Operating Temperature Range
Διαβάστε περισσότεραMCRH Series High Temp. Electrolytic Capacitors
Features: General purpose. Wide CV value range. Safety vent construction products, ECRH series are guaranteed for 000 hours at C. High temperature radial leaded electrolytic. Supplied loose with straight
Διαβάστε περισσότεραI 0.01CV or 3 (μa) whichever is greater measured after 2 I 0.03CV +40 (μa) after 2 minutes application of rated
+15 C, General () FEATURES ì ì Rated working voltage range 6.3 to 1V DC / 16 to 45V DC at operation temperature range -4 to +15 C / -25 to +15 C. This series is for communication equipments, switching
Διαβάστε περισσότερα+85 C General Purpose Miniature Aluminum Capacitors
+85 C General Purpose Miniature Aluminum Capacitors Features- Increased CV Efficiency Non Polar Design Available (Special Order) General Specifications- Operating Temperature: -40 to +85 C Voltage Range:
Διαβάστε περισσότεραELECTROLYTIC, Snap-in, 2 pin
CAPACITORS ELECTROLYTIC, Snap-in, 2 pin NOVER type LS A range of high CV, high ripple current, aluminium electrolytic capacitors suitable for general purpose use. Housed in compact bodies and fitted with
Διαβάστε περισσότεραC4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
Διαβάστε περισσότεραALUMINUM ELECTROLYTIC CAPACITORS LKG
Lug / Snap-in Terminal Type, For Audio Equipment Disigned for high grade audio equipment, giving priority to high fidelity sound quality. The variation expansion of the. TYPE-: The low profile high tone
Διαβάστε περισσότεραType 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
Διαβάστε περισσότεραSuitable for DC-DC Converters, Voltage Regulators, Decoupling Applications for Computer Motherboards, etc. Performance Characteristics
+105 C, Higher Ripple, Lower than ULG Features Higher Ripple, Lower than ULG Wide Temperature Range RoHS Compliant Applications Suitable for DC-DC Converters, Voltage Regulators, Decoupling Applications
Διαβάστε περισσότεραLGU. Low Profile. Smaller. LGW High Ripple Current LGN. Performance Characteristics. Measurement frequency : 120Hz Rated voltage (V)
Snap-in Terminal Type, 105 C Standard Withstanding hours application of rated ripple current at 105 C. Compliant to the RoHS directive (2011/65/EU). LGW High Ripple Smaller Low Profile Specifications LGN
Διαβάστε περισσότεραSurface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
Διαβάστε περισσότεραType CGS High-Cap Screw Terminal Aluminum Electrolytic Capacitor
High CV, Screw Terminal Capacitors Specifications Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature: Ripple Current Multipliers: Type CGS screw terminal, aluminum electrolytic
Διαβάστε περισσότεραAluminum Capacitors C, Tubular, Radial Lead
Aluminum Capacitors + 105 C, Tubular, Radial Lead FEATURES Wide temperature range Radial design in two and three lead configuration Ideal SMPS output filter PERFORMANCE CHARACTERISTICS Operating Temperature:
Διαβάστε περισσότεραLS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). S Smaller G Specifications Item Category Temperature
Διαβάστε περισσότεραMetal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Διαβάστε περισσότερα1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Διαβάστε περισσότεραLS series Withstanding 3000 hours application of rated ripple current at 85 C.
Snap-in Terminal Type, Standard Withstanding 000 hours application of rated current at 85 C. S Smaller N Specifications Item Category Temperature Range Voltage Range Capacitance Range Capacitance Tolerance
Διαβάστε περισσότεραSpecification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)
High CV-value Long Life > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life Optimized designs available on request RoHS Compliant application Basic design Smoothing, energy storage,
Διαβάστε περισσότεραHigh Lipple Current. Low Profile. Smaller. Performance Characteristics to 100
Snap-in Terminal Type, 105 C Standard Withstanding hours application of rated ripple current at 105 C. Compliant to the RoHS directive (2011/65/EU). GW High Lipple Smaller GU Low Profile Specifications
Διαβάστε περισσότερα601D C Tubular Axial Lead Aluminum Capacitors. Features- Wide Temperature Range Military Version Mil-PRF-39018/03 Long Life Low ESR
+105 C Tubular Axial Lead Aluminum Capacitors 601D Features- Wide Temperature Range Military Version Mil-PRF-39018/03 Long Life Low ESR General Specifications- Operating Temperature: -55 to +105 C Voltage
Διαβάστε περισσότεραLarge Can. Aluminum Electrolytic Capacitors. Year 2000 issue
Large Can Aluminum Electrolytic Capacitors Year 2000 issue Matsushita Electronic Components Corporation of America (ACOM) has been manufacturing aluminum electrolytic capacitors since 1982. ACOM initially
Διαβάστε περισσότεραGU series. GU Low Profile ALUMINUM ELECTROLYTIC CAPACITORS. Specifications. Type numbering system (Example : 200V 680µF) Drawing
Snap-in Terminal Type, Wide Temperature Range Withstanding hours application of rated current at 105 C. Adapted to the RoHS directive (2002/95/EC). Smaller GU Low Profile Specifications Item Category Temperature
Διαβάστε περισσότεραType C Aluminum Electrolytic, Screw Terminal Best Value 85 C High Capacitance Screw Terminal Type
Type 386 85 C Aluminum Electrolytic, Screw Terminal While Type 386 s standard encasement is by compression with the capacitor element captured on an aluminum peg in the can bottom and a phenolic peg in
Διαβάστε περισσότεραB37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Διαβάστε περισσότεραMultilayer Chip Capacitors C0G/NP0/CH
Multilayer Chip Capacitors C0G/NP0/CH Features Good thermal stability High insulation resistance Low dissipation factor Low inductance Applications Resonant circuits Filter circuits Timing elements Coupling
Διαβάστε περισσότερα+105 C General Purpose Radial Lead Aluminum Electrolytic Capacitors. filtering
CKH/CKE +105 C Radial Lead s Standard case sizes Bypass Multiple case sizes coupling Lead free leads filtering Operating Temperature Range -55 C to +105 C (6.3 to 100 WVDC) -40 C to +105 C (160 to 400
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Διαβάστε περισσότεραMultilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Διαβάστε περισσότεραNMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
Διαβάστε περισσότεραApplications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
Διαβάστε περισσότεραSunlord. Wire Wound SMD Power Inductors SWCS Series SWCS XXXX -XXX T. Operating Temperature: -25 ~ +105 FEATURES APPLICATIONS PRODUCT IDENTIFICATION
Wire Wound SMD Power Inductors SWCS Series Operating Temperature: -25 ~ +105 FEATURES Various high power inductors are superior to be high saturation Suitable for surface mounting equipment APPLICATIONS
Διαβάστε περισσότεραTHICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Διαβάστε περισσότεραFP series Anti-Bend (Soft termination) capacitor series
FP series Anti-Bend (Soft termination) capacitor series Features Applications» High performance to withstanding 5mm of substrate» For general digital circuit bending test guarantee» For power supply bypass
Διαβάστε περισσότερα2013 REV 01 ELECTRONICS CAPACITORS. DC Applications Metallized Polypropylene Film Self Healing
2013 REV 01 POWER EECTRONICS CAPACITORS C Applications Metallized Polypropylene Film Healing OUR MISSION: POWER EECTRONICS AN SPECIA CAPACITORS M.V. PFC CAPACITORS AN BANKS IGHTING CAPACITORS MOTOR RUN
Διαβάστε περισσότεραSMD Power Inductor-VLH
SMD Power Inductor-VH Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 321618C 3.2±0.3 1.6±0.2
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Διαβάστε περισσότερα2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Διαβάστε περισσότεραPPA Metallized polypropylene film capacitor MKP - Snubber/pulse - High current
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and high pulse applications
Διαβάστε περισσότεραRC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Διαβάστε περισσότεραInterference Suppression Capacitor
MOLDED BOX CONSTRUCTION, SUPPRESSION CAPACITOR, RADIAL LEAD FEATURES UL, CSA, VDE, CQC, CE, ENEC APPROVALS X2 SAFETY CAP CLASSIFICATION FOR USE IN ACROSS-THE-LINE APPLICATIONS METALLIZED POLYPROPYLENE
Διαβάστε περισσότεραC121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]
Multilayer Chip SDV Series Operating Temp. : -55 ~+125 FEATURES SMD type suitable for high density mounting Excellent clamping ratio and quick response time (
Διαβάστε περισσότεραData sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Διαβάστε περισσότεραUnshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
Διαβάστε περισσότεραSMD Power Inductor-VLH
SMD Power Inductor-VH PAD AYOUT Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252510 2.5±0.2
Διαβάστε περισσότεραNPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
Διαβάστε περισσότεραPower Inductor LVS Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering LVS 6645 L - 1R M - AU Series Name Dimensions Code Inductance Internal Code (mm) (uh) Tolerance 4412 4.x4.x1.2 L Low DCR R47.47 M ±% 4418 4.x4.x1.8
Διαβάστε περισσότεραTerminal Contact UL Insulation Designation (provided with) style form system approval Flux tight
eatures A miniature PCB Power Relay. form A contact configuration with quick terminal type. 5KV dielectric strength, K surge voltage between coils to contact. Ideal for high rating Home Appliances of heating
Διαβάστε περισσότεραCASE DIMENSIONS: 1.27±0.13 (0.050±0.005) A 2.54 (0.100) 1.27 (0.050) 1.27 (0.050) 1.27±0.13 (0.050±0.005) B 3.81 (0.150) 1.27 (0.050) 1.27 (0.
MARKING (White marking on black body) Polarity Stripe (+) Code Rated Voltage The T4Z HRC4000 Medical Grade series is designed for use in non-critical medical applications. The T4Z product line is based
Διαβάστε περισσότεραHIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
Διαβάστε περισσότεραOperating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
Διαβάστε περισσότεραYJM-L Series Chip Varistor
Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
Διαβάστε περισσότερα4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
Διαβάστε περισσότερα4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
Διαβάστε περισσότεραThin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Διαβάστε περισσότεραDistributed by: www.jameco.com -800-83-4242 The content and copyrights of the attached material are the property of its owner. φ δ δ φ φφ φ 86 δ φ δ An explanation of the taping dimensions can be found
Διαβάστε περισσότεραLR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Διαβάστε περισσότεραNTC Thermistor:SCK Series
Features. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φmm:-40~+70
Διαβάστε περισσότεραNTC Thermistor:TSM type
Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Διαβάστε περισσότεραSMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008
SMD Wire Wound Ferrite Chip Inductors - LS Series LS Series LS Series is the newest in open type ferrite wire wound chip inductors. The wire wound ferrite construction supports higher SRF, lower DCR and
Διαβάστε περισσότεραNo Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
Διαβάστε περισσότεραHigh Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
Διαβάστε περισσότεραPEH C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life
PEH 169 85 C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life APPLICATION BASIC DESIGN Smoothing, energy storage, or pulse operation in telecommunication
Διαβάστε περισσότεραNTC Thermistor:SCK Series
Features. RoHS & HF compliant 2. Body size: Ф5mm ~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70
Διαβάστε περισσότεραDATA SHEET Surface mount NTC thermistors. BCcomponents
DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped
Διαβάστε περισσότεραAerovox Corp. Type H High Voltage AC & DC Capacitors. Film Capacitors for Power Electronics Applications. RoHS Compliant. Highlights.
H Aerovox Corp. Film Capacitors for Power Electronics Applications Specifications Outline Drawing Capacitance Range: AC Voltage Range: DC Voltage Range: Temperature Range: Capacitance Tolerance: Dissipation
Διαβάστε περισσότεραPolymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
Διαβάστε περισσότεραFeatures. Terminal Contact Enclosure style style form Open type Dust cover Ears on cover Antirotation-tab Ears on top
SONG CHUN Features 20/2 general purpose Power Relays. SPDT, DPDT, TPDT contact configurations. DC & C coils are both available. Optional for flange covers, tapped core w/anti-rotation tab, indicator lamp,
Διαβάστε περισσότεραCSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Διαβάστε περισσότεραHigh Voltage Ceramic Capacitor (Radial Disc Type)
High Voltage Ceramic Capacitor (Radial Disc Type) 1. Material Characteristics Series No TEMP. CHAR. Working Temperature ( ) Insulation Resistance ( MΩ) 1 UJ -25~+85 100000 2 SL -25~+85 100000 Disspation
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Διαβάστε περισσότεραPolymer PTC Resettable Fuse: KMC Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. IA size: 0603, 0805, 1206, 1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small
Διαβάστε περισσότεραMetal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
Διαβάστε περισσότεραRF series Ultra High Q & Low ESR capacitor series
RF series Ultra High Q & Low ESR capacitor series FAITHFUL LINK Features Application» High Q and low ESR performance at high frequency» Telecommunication products & equipments:» Ultra low capacitance to
Διαβάστε περισσότεραMultilayer Chip Inductor / CL TYPE
Multilayer Chip Inductor / CL TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no lead
Διαβάστε περισσότεραChilisin Electronics Singapore Pte Ltd
hilisin Electronics ingapore Pte Ltd High urrent hip Beads, PBY eries Feature: Our MD High urrent hips Beads is specially designed to with tand large urrents while providing a means of EMI/RFI attenuation
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
Διαβάστε περισσότεραNTC Thermistor:TTC3 Series
Features. RoHS compliant 2. Halogen-Free(HF) series are available 3. Body size: Ф3mm 4. Radial lead resin coated 5. Operating temperature range: -40 ~+25 6. Wide resistance range 7. Cost effective 8. Agency
Διαβάστε περισσότεραRSDW08 & RDDW08 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (Typ.) CAPACITOR LOAD (MAX.) RSDW08F-03 344mA 3.3V 2000mA 80% 2000μF RSDW08F-05
Διαβάστε περισσότεραCarbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
Διαβάστε περισσότεραSMD Power chokes- SPD Series SPD series chokes For High Current Use
SMD Power chokes- SPD Series SPD series chokes For High Current Use Features 1.Shielded construction. 2.High current rating up to DC Amp 3.High frequency range up to 5.MHz 4.Ultra low buzz noise, due to
Διαβάστε περισσότεραSERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES) (8) 95-8365 venkel.com Features: RoHS Compliant and Halogen Free Good Q values High SRF range: 1nH to 47uH Tolerance: ±.2nH, ±.3nH, ±2%, ±5%, ±1% High
Διαβάστε περισσότεραDC-DC Constant Current Step-Down LED driver LDD-300L LDD-350L LDD-500L LDD-600L LDD-700L CURRENT RANGE
SPECIFICATION ORDER NO. LDD-00L LDD-0L LDD-00L LDD-00L LDD-700L CURRENT RANGE 00mA 0mA 00mA VOLTAGE RANGE Note. ~ VDC for LDD-00~700L/LW ; ~ 8VDC for LDD-00~700LS CURRENT ACCURACY (Typ.) ±% at VDC input
Διαβάστε περισσότεραPolymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
Διαβάστε περισσότερα