CMPTER 2.92MM CONNECTORS. ... A Vital Part of Connection World. Receptacles With Accepts Pin Receptacles, Metal Through The Wall
|
|
|
- Ευφροσύνη Κρεστενίτης
- 5 χρόνια πριν
- Προβολές:
Transcript
1 ... A Vital Part of Connection World Receptacles With Accepts Pin Receptacles, Metal Through The Wall Receptacles, Insulator Through The Wall Receptacles, Air ine Through The Wall PCB Connectors 2.92MM CONNECTORS COPYRIGHT EECTRONICS 2014
2 2.92mm Precision Connectors ESCRIPTION 2.92mm connector is 50ohm precision connector designed to perform mode free to 40GHz. The outer conductor measures 2.92mm with a strong outer body wall compared to dielectric loaded infterfaces of comparable size. The interface dielectric is air with the center conductor supported by a short dielectric bead. 2.92mm connectors are mechanically compatible with SMA and 3.5mm connectors, but the male centre pin is shortened to allow outer conductor engagement before the center contacts mate, preventing damage to the female contact tines. Cmpter offers 2.92mm connectors for semi-rigid and low-loss flexible cable, receptacles and precision adapters which may be adapterd for custom applications. 2.92mm esign Features Excellent performance up to 40GHz ow VSWR and insertion loss Rugged construction for reliability Mechanically compatible with 3.5mm and SMA connector series CONTENTS escription... 1 Interface dimensions... 2 Technical data... 3 Receptacles With Accepts Pin... 4 Receptacles, Metal Through The Wall... 7 Receptacles, Insulator Through The Wall... 9 Receptacles, Air ine Through The Wall PCB Connectors
3 2.92mm INTERFACE Interface dimensions conformable to the standards: MI-ST-348A 2
4 TECHNICA ATA EECTRICA ATA Impedance Frequency range ielectric withsanding voltage Insulation resistance Contact resistance VSWR max. 50 Ohm C 40GHz 750V 3*1000 MΩ inter contact 3 mω out contact 2.0 mω 1.15 : 1 MECHANICA ATA Base material Centercontact Body Insulator urability(matings) Copper Beryllium Alloy, Gold-pated Stainless Steel, Passivated PEI, PTFE 500 ENVIRONMENTA Temperature Range Thermal shock Corrosion Vibration -55 C to C MI-ST-202, Method 107,Condition B Saltspray test acc.to MI-ST-202, Method 101, Condition B MI-ST-202, Method 204, Condition 3
![RECEPTACES WITH ACCEPTS PIN Receptacles, jacks (female), Flange Mount PIN 12.70 [.500 SQ.] 15.80 [.622 IA.] 96-02-9F5-001A 96-02-9F5-001B 96-02-9F5-001C 96-02-9F5-001 4-2.60 [.102 IA.](/docs-images/89/99088255/images/5-2.jpg "] SCOKET TO ACCEPT PIN 2 [.079] MAX EPTH PIN 9.5 [.374 SQ.] 12.8 [.504 IA.] 96-02-9F5-002A 96-02-9F5-002B 96-02-9F5-002C 96-02-9F5-002 4-1.70 [.067 IA.] SCOKET TO ACCEPT PIN 2 [.079] MAX EPTH PIN 96-02-9E5-003A 96-02-9E5-003B 96-02-9E5-003C 96-02-9E5-003 12.")
5 RECEPTACES WITH ACCEPTS PIN Receptacles, jacks (female), Flange Mount PIN [.500 SQ.] [.622 IA.] F5-001A F5-001B F5-001C F [.102 IA.] SCOKET TO ACCEPT PIN 2 [.079] MAX EPTH PIN 9.5 [.374 SQ.] 12.8 [.504 IA.] F5-002A F5-002B F5-002C F [.067 IA.] SCOKET TO ACCEPT PIN 2 [.079] MAX EPTH PIN E5-003A E5-003B E5-003C E [.480] [.622 IA.] SCOKET TO ACCEPT PIN 5.70 [.224] 2 [.079] MAX EPTH PIN E5-004A E5-004B E5-004C E [.402] [.511 IA.] SCOKET TO ACCEPT PIN 2 [.079] MAX EPTH 4
![RECEPTACES WITH ACCEPTS PIN Receptacles, jacks (female), Flange Mount PIN 96-02-9E5-005A 96-02-9E5-005B 96-02-9E5-005C 96-02-9E5-005 8.90 [.350] 12.70 [.500 IA.](/docs-images/89/99088255/images/6-0.jpg "] SCOKET TO ACCEPT PIN 2 [.079] MAX EPTH PIN 96-02-9E5-006A 96-02-9E5-006B 96-02-9E5-006C 96-02-9E5-006 12.70 [.500 IA.] SCOKET TO ACCEPT PIN 2 [.079] MAX EPTH Receptacles, jacks (female), Thread in PIN 10.")
![80 [.425] 96-02-9A5-007A 96-02-9A5-007B 96-02-9A5-007C 96-02-9A5-007 SCOKET TO ACCEPT PIN 2 [.079] MAX EPTH Receptacles, plugs (male), Flange Mount PIN 12.70 [.500 SQ.](/docs-images/89/99088255/images/6-1.jpg "] 15.80 [.622 IA.] 96-03-9F5-008A 96-03-9F5-008B 96-03-9F5-008C 96-03-9F5-008 4-2.60 [.102 IA.] SCOKET TO ACCEPT PIN 2 [.079] MAX EPTH 5")
6 RECEPTACES WITH ACCEPTS PIN Receptacles, jacks (female), Flange Mount PIN E5-005A E5-005B E5-005C E [.350] [.500 IA.] SCOKET TO ACCEPT PIN 2 [.079] MAX EPTH PIN E5-006A E5-006B E5-006C E [.500 IA.] SCOKET TO ACCEPT PIN 2 [.079] MAX EPTH Receptacles, jacks (female), Thread in PIN [.425] A5-007A A5-007B A5-007C A5-007 SCOKET TO ACCEPT PIN 2 [.079] MAX EPTH Receptacles, plugs (male), Flange Mount PIN [.500 SQ.] [.622 IA.] F5-008A F5-008B F5-008C F [.102 IA.] SCOKET TO ACCEPT PIN 2 [.079] MAX EPTH 5
![RECEPTACES WITH ACCEPTS PIN Receptacles, plugs (male), Flange Mount PIN 9.5 [.374 SQ.] 12.8 [.504 IA.](/docs-images/89/99088255/images/7-1.jpg "] 96-03-9F5-009A 96-03-9F5-009B 96-03-9F5-009C 96-03-9F5-009 4-1.70 [.067 IA.] SCOKET TO ACCEPT PIN 2 [.")
![079] MAX EPTH PIN 96-03-9E5-010A 96-03-9E5-010B 96-03-9E5-010C 96-03-9E5-010 12.20 [.480] 15.80 [.622 IA.] SCOKET TO ACCEPT PIN 2 [.079] MAX EPTH 5.70 [.](/docs-images/89/99088255/images/7-2.jpg "224] PIN 96-03-9E5-011A 96-03-9E5-011B 96-03-9E5-011C 96-03-9E5-011 10.20 [.402] 14.00 [.551 IA.] SCOKET TO ACCEPT PIN 2 [.")
7 RECEPTACES WITH ACCEPTS PIN Receptacles, plugs (male), Flange Mount PIN 9.5 [.374 SQ.] 12.8 [.504 IA.] F5-009A F5-009B F5-009C F [.067 IA.] SCOKET TO ACCEPT PIN 2 [.079] MAX EPTH PIN E5-010A E5-010B E5-010C E [.480] [.622 IA.] SCOKET TO ACCEPT PIN 2 [.079] MAX EPTH 5.70 [.224] PIN E5-011A E5-011B E5-011C E [.402] [.551 IA.] SCOKET TO ACCEPT PIN 2 [.079] MAX EPTH E5-012A E5-012B E5-012C E5-012 PIN 8.90 [.350] [.500 IA.] SCOKET TO ACCEPT PIN 2 [.079] MAX EPTH 6
![RECEPTACES, META THROUGH THE WA Receptacles, jacks (female), Flange Mount 96-02-9F2-013A 0.30 [.012 IA.] 4.00 [.157 IA.] 12.](/docs-images/89/99088255/images/8-0.jpg "7 [.500 SQ.] 15.8 [.622 IA.] 96-02-9F2-013B 4-2.6 [.102 IA.] 0.30 [.012 IA.] 4.00 [.157 IA.] 9.5 [.374 SQ.] 12.8 [.504 IA.")
![] 96-02-9F2-014A 96-02-9F2-014B 4-1.70 [.067 IA.] 96-02-9E2-015A 96-02-9E2-015B 0.30 [.012 IA.] 4.00 [.157 IA.] 12.20 [.](/docs-images/89/99088255/images/8-2.jpg "480] 15.80 [.622 IA.] 5.70 [.224] 96-02-9E2-016A 96-02-9E2-016B 0.30 [.012 IA.] 4.00 [.157 IA.] 10.20 [.402] 14.00 [.551 IA.")
8 RECEPTACES, META THROUGH THE WA Receptacles, jacks (female), Flange Mount F2-013A 0.30 [.012 IA.] 4.00 [.157 IA.] 12.7 [.500 SQ.] 15.8 [.622 IA.] F2-013B [.102 IA.] 0.30 [.012 IA.] 4.00 [.157 IA.] 9.5 [.374 SQ.] 12.8 [.504 IA.] F2-014A F2-014B [.067 IA.] E2-015A E2-015B 0.30 [.012 IA.] 4.00 [.157 IA.] [.480] [.622 IA.] 5.70 [.224] E2-016A E2-016B 0.30 [.012 IA.] 4.00 [.157 IA.] [.402] [.551 IA.] 7
9 RECEPTACES, META THROUGH THE WA Receptacles, jacks (female), Flange Mount E2-017A E2-017B 0.30 [.012 IA.] 4.00 [.157 IA.] 8.90 [.350] [.500 IA.] E2-018A E2-018B 0.30 [.012 IA.] 4.00 [.157 IA.] 2-? 2.60 [.102 IA.] [.500 IA.] 8
10 RECEPTACES, INSUATOR THROUGH THE WA Receptacles, jacks (female), Flange Mount F7-019A F7-019B 0.30 [.012 IA.] 1.67 [.066 IA.] [.500 SQ.] [.102 IA.] [.622 IA.] F7-020A F7-020B 0.30 [.012 IA.] 1.67 [.066 IA.] 9.5 [.374 SQ.] 12.8 [.504 IA.] [.067 IA.] E7-021A E7-021B 0.30 [.012 IA.] 1.67 [.066 IA.] [.480] [.622 IA.] 5.70 [.224] E7-022A E7-022B 0.30 [.012 IA.] 1.67 [.066 IA.] [.402] [.551 IA.] 9
11 RECEPTACES, INSUATOR THROUGH THE WA Receptacles, jacks (female), Flange Mount E7-023A E7-023B 0.30 [.012 IA.] 1.67 [.066 IA.] 8.90 [.350] [.500 IA.] E7-024A E7-024B 0.30 [.012 IA.] 1.67 [.066 IA.] [.500 IA.] 10
![RECEPTACES, AIR INE THROUGH THE WA Receptacles, jacks (female), Flange Mount 15.80 [.622 IA.] 12.70 [.500 SQ.] 96-02-9F2-025A 96-02-9F2-025B 96-02-9F2-025C 7 [.276] 4-2.60 [.102 IA.](/docs-images/89/99088255/images/12-1.jpg "] 96-02-9F2-026A 12.8 [.504 IA.] 9.5 [.374 SQ.] 96-02-9F2-026B 96-02-9F2-026C 7 [.276] 4-1.70 [.067 IA.] 96-02-9E2-027A 96-02-9E2-027B 96-02-9E2-027C 7 [.276] 12.20 [.480] 15.80 [.622 IA.] 5.70 [.224] 96-02-9E2-028A 96-02-9E2-028B 96-02-9E2-028C 7 [.")
12 RECEPTACES, AIR INE THROUGH THE WA Receptacles, jacks (female), Flange Mount [.622 IA.] [.500 SQ.] F2-025A F2-025B F2-025C 7 [.276] [.102 IA.] F2-026A 12.8 [.504 IA.] 9.5 [.374 SQ.] F2-026B F2-026C 7 [.276] [.067 IA.] E2-027A E2-027B E2-027C 7 [.276] [.480] [.622 IA.] 5.70 [.224] E2-028A E2-028B E2-028C 7 [.276] [.402] [.551 IA.] 11
![] 96-02-9E2-030A 96-02-9E2-030B 96-02-9E2-030C 7 [.276] 12.70 [.500 IA.](/docs-images/89/99088255/images/13-1.jpg "] Receptacles, plugs (male), Flange Mount 96-03-9F2-031A 96-03-9F2-031B 0.64 [.025 IA.] 12.70 [.500 SQ.] 15.80 [.")
13 RECEPTACES, AIR INE THROUGH THE WA Receptacles, jacks (female), Flange Mount E2-029A E2-029B E2-029C 7 [.276] 8.90 [.350] [.500 IA.] E2-030A E2-030B E2-030C 7 [.276] [.500 IA.] Receptacles, plugs (male), Flange Mount F2-031A F2-031B 0.64 [.025 IA.] [.500 SQ.] [.622 IA.] [.102 IA.] F2-032A F2-032B 0.64 [.025 IA.] 9.5 [.374 SQ.] 12.8 [.504 IA.] [.067 IA.] 12
![RECEPTACES, AIR INE THROUGH THE WA Receptacles, plugs (Male), Flange Mount 96-03-9E2-033A 96-03-9E2-033B 0.64 [.025 IA.] 12.20 [.480] 15.80 [.622 IA.] 5.70 [.](/docs-images/89/99088255/images/14-0.jpg "224] 96-03-9E2-034A 96-03-9E2-034B 0.64 [.025 IA.] 10.20 [.402] 14.00 [.551 IA.] 96-03-9E2-035A 96-03-9E2-035B 0.64 [.025 IA.] 8.90 [.350] 12.70 [.500 IA.")
14 RECEPTACES, AIR INE THROUGH THE WA Receptacles, plugs (Male), Flange Mount E2-033A E2-033B 0.64 [.025 IA.] [.480] [.622 IA.] 5.70 [.224] E2-034A E2-034B 0.64 [.025 IA.] [.402] [.551 IA.] E2-035A E2-035B 0.64 [.025 IA.] 8.90 [.350] [.500 IA.] 13
![PCB CONNECTORS Straight PCB jacks(female) 12.50 [.492] 3.00 [.118] 6.10 [.240] 4-1.00 [.039 SQ.](/docs-images/89/99088255/images/15-0.jpg "] 96-02-5M2-036 4.30 [.169] 6.10 [.240] 1.27 [.050 IA.")
![] 96-02-5M2-037A 96-02-5M2-037B 96-02-5M2-037C 1.93 [.076] 0.76 [.030] 1.02 [.040] Board Thickness 1.](/docs-images/89/99088255/images/15-1.jpg "78 [.070] 0.61 [.024] 0.87 [.034] 11.70 [.461] 0.80 [.031] 3.00 [.118] 7.50 [.295 IA.] 1.90 [.075] 0.")
15 PCB CONNECTORS Straight PCB jacks(female) [.492] 3.00 [.118] 6.10 [.240] [.039 SQ.] M [.169] 6.10 [.240] 1.27 [.050 IA.] M2-037A M2-037B M2-037C 1.93 [.076] 0.76 [.030] 1.02 [.040] Board Thickness 1.78 [.070] 0.61 [.024] 0.87 [.034] [.461] 0.80 [.031] 3.00 [.118] 7.50 [.295 IA.] 1.90 [.075] 0.30 [.012 IA.] 5.40 [.213] 0.60 [.024] 0.15 [.006] 14
16 Cmpter Electronics, td. Office Adress: #45 ZhongShan East Road, ZhenJiang, JiangSu China. Tel: Fax: Website:
CMPTER SMA CONNECTORS. ... A Vital Part of Connection World
... A Vital Part of Connection World Receptacles With Accepts Pin Receptacles Metal Through The Wall Receptacles Insulator Through The wall Receptacles Air ine Through The wall Receptacles With Tap Receptacles
2.92mm. Precision 40GHz Connectors
2.92mm Precision 40GHz Connectors 2.92mm Precision Connectors ESCRIPTION 2.92mm connectors are 50ohm precision connector designed to operate up to 40GHz. The outer conductor measures 2.92mm and has a strong
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
BMA SERIES Subminiature Blind Mate Connectors
SERIES Subminiature Blind Mate Connectors FEATURES The blindmate connectors are designed for blindmate applications up to Ghz. They have a slide-on, non-locking interface which ensures frequent matings
MMCX SERIES Microminiature Coaxial Connectors
SERIES Microminiature Coaxial Connectors FEATURES connectors are smaller than MCX connectors and are used from DC up to 6 GHz in applications where a tiny size is crucial. INTERFACE MATING DIMENSIONS PLUG:
SMB SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50Ω impedance for applications up to 4GHz. Suited for cables with dielectric diameters of up to 1.5mm. The connectors
2.4mm Series Connectors
2.4mm Series Connectors Table of Contents 2.4mm Series Connectors(DC~50GHz)... 1 2.4mm Replaceable Connectors... 2 2.4mm Receptacle (Round Contact) Connectors... 7 2.4mm Receptacle (Exposed Teflon) Connectors...
2.92mm Series Connector
2.92mm Series Connector Table of Contents 2.92mm Series Connector(DC~40GHz)... 1 2.92mm Replaceable Connectors... 2 2.92mm Receptacle (Round Contact) Connectors... 7 2.92mm Receptacle (Exposed Teflon)
DEUTSCH 983 Series Filter Connectors MIL-DTL SERIES III
DEUTSCH 93 Series Connectors are MIL-DTL-3723 Series III style connectors meeting ESC, ESC15, and EN2997 standards. With medium-density insert arrangements, fine threaded coupling, and corrosion resistant
TERMINATIONS FOR SPACE / THERMAL VACUUM APPLICATIONS
Introduction Terminations are intended to terminate a coaxial transmission in its characteristic impedance. It dissipates the whole R.F. incident power. Heat transfer is done by conduction or convection
0.635mm Pitch Board to Board Docking Connector. Lead-Free Compliance
.635mm Pitch Board to Board Docking Connector Lead-Free Compliance MINIDOCK SERIES MINIDOCK SERIES Features Specifications Application.635mm Pitch Connector protected by Diecasted Zinc Alloy Metal Shell
SMA Connector Series
Connector Series able of Contents Connector Series(DC~27GHz)... 1 Replaceable Connectors... 2 Receptacle (Round Contact) Connectors... 8 Receptacle (Exposed eflon) Connectors... 15 Receptacle (Blunt Post
Mechanical Properties. Electical conductivity 3) < 0.5 mω non conductive < 0.5 mω 1) 2)
CABE CAMPS Metallic Cable Clamp A MS 3420 Bushing Shell material: A - Aluminum Alloy B - Copper Alloy C - Stainless Steel Surface treatment: A - Black Zinc-Cobalt C - Black Polyurethane Varnished E - Electro
2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
![2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%](/thumbs/78/78109689.jpg "2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%")
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Multilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
38BXCS STANDARD RACK MODEL. DCS Input/Output Relay Card Series MODEL & SUFFIX CODE SELECTION 38BXCS INSTALLATION ORDERING INFORMATION RELATED PRODUCTS
DCS Input/Output Relay Card Series STANDARD RACK MODEL 38BXCS MODEL & SUFFIX CODE SELECTION 38BXCS MODEL CONNECTOR Y1 :Yokogawa KS2 cable use Y2 :Yokogawa KS9 cable use Y6 :Yokogawa FA-M3/F3XD32-3N use
1.575 GHz GPS Ceramic Chip Antenna Ground cleared under antenna, clearance area 4.00 x 4.25 mm / 6.25 mm. Pulse Part Number: W3011 / W3011A
W0 Datasheet version. ceramic antenna. (09/08).575 GHz Ceramic Chip Antenna Ground cleared under antenna, clearance area x 4.5 mm / 6.5 mm. Pulse Part Number: W0 / W0A Features - Omni directional radiation
Type 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
Shunts & Multiple Shunts. Stamped Contact DIP IC Sockets. PLCC Sockets. Jumpers. DDR DIMM Sockets SOCKETS. System CS - Technical Specifications
System - Technical Specifications Shunts & Multiple Shunts Stamped Contact DIP IC Sockets ~ ~ PLCC Sockets ~ Jumpers ~ DDR DIMM Sockets Electrical: Current/Voltage rating: 0.5A/25VAC for Single Type 0.3A/25VAC
Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
DEUTSCH RR Series Filter Connectors MIL-DTL SERIES 2
DUTSCH ilter Connectors DUTSCH RR Series ilter Connectors MIL-DTL-2642 SRIS 2 DUTSCH RR Series connectors are medium-density, MIL-DTL-2642 Series 2 circular connectors using a bayonet coupling with visible
High Current Chip Ferrite Bead MHC Series
High Current Chip Ferrite Bead MHC Series Features Combination of high frequency noise suppression with capability of handing high current. The current rating up to 6 Amps with low DC. Applications High
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
MIL-DTL Micro-D Connector R04J Series Straight to PCB Type
MIL-TL-353 Micro- onnector R4J Series Straight to P Type Specication MIL-TL-353 Micro- onnector nvironment temperature: ~ Vibration: Hz~Hz, 6m/s Random vibration: Power spectrum density.4g Hz root mean
Ferrite Chip Bead(Lead Free)
Ferrite Chip Bead(Lead Free) YCM-Series 1.Features 1. Monolithic inorganic material construction. 2. Closed magnetic circuit avoids crosstalk. 3. S.M.T. type. 4. Suitable for reflow soldering. 5. Shapes
Electrical Specifications at T AMB =25 C DC VOLTS (V) MAXIMUM POWER (dbm) DYNAMIC RANGE IP3 (dbm) (db) Output (1 db Comp.) at 2 f U. Typ.
Surface Mount Monolithic Amplifiers High Directivity, 50Ω, 0.5 to 5.9 GHz Features 3V & 5V operation micro-miniature size.1"x.1" no external biasing circuit required internal DC blocking at RF input &
Cal-Chip Electronics, Incorporated Multilayer Chip Inductors For High Frequency
Cal-Chip Electronics, Incorporated Multilayer Chip Inductors For High GHF SERIES FEATURES Multilayer inductor made of advanced ceramics with low-resistivity silver used as internal conductors provides
HSB Series. 1. Specifications DIN VDE 0110 Concerning clearance and creepage distances DIN VDE 0627 Connectors and plug devices
HSB Series 1. Specifications DIN VDE 0110 Concerning clearance and creepage distances DIN VDE 0627 Connectors and plug devices 2. Standards DIN EN 60 664-1 DIN EN 61 984 3. Approvals 169 All specifications
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
ISM 868 MHz Ceramic Antenna Ground cleared under antenna, clearance area mm x 8.25 mm. Pulse Part Number: W3013
W0 Datasheet version.. Ceramic Antenna. (0/08). Ceramic Antenna Ground cleared under antenna, clearance area 0.80 mm x 8.5 mm. Pulse Part Number: W0 Features - Omni directional radiation - Low profile
Metal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
LR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Metal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
Metal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
Datasheet. MIL-DTL series III circular electrical connector / 18
Datasheet MIL-DTL-38999 series III circular electrical connector 1 / 18 MIL-DTL-38999 series III circular electrical connector Brief introducing how to order Outline dimension Rear accessory Characteristic
B37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Metal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
Anti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
D-SUB SOLDER TYPE ORDER INFORMATION. Bestell Code/Order Code: DST (Stecker / Male) L DBU (Buchse / Female) L
D-SUB SOLDER TYPE DST (Stecker / Male) - - - L DBU (Buchse / Female) - - - L = Polzahl / No. of contacts (9,15,25,37) = Isolierkörper weiß / Insulator white L = Lötkelch / Solder Type 1 D-SUB P.C.B. STRAIGHT
10.16mm PITCH TERMINAL CONNECTOR 4.34(0.171) 3.5(0.138) 9.5(0.374) 19.5(0.768) 3(0.118) 7.085(0.279) 8.485(0.334) 21(0.827) 14(0.
7010 SRIS 10.16mm PITH TRMINL ONNTOR 4.345 (0.171) 3.5 (0.138) 19.5(0.768) 9.5 (0.374) 4.34(0.171) Ref. 10.585(0.417) Ref. 1.9(0.075) Ref. 2.2(0.087) ORR O 7010 160 : RoHS ompliance ontact name 160 : Receptacle
RF CABLE .047 CU - C - P C : Silver plated copper(spc) W : Silver plated copperweld(spcw) Dielectric P : PTFE F : FEP
RF ABBREVIATIONS: CW FEP PE PTFE PVC SPC SPCW TPC SPEX LDPTFE : Copper Covered Steel Wire : Fluorinated Ethylene Propylene : Polyethylene : Polytetrafluoroethylene : Polyvinyl Chloride : Silver Plated
ZLW Series. Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD
ZLW Series Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD 1 Application Apply as the transportation of liquids in the fields of air condition, heating, sanitary water, water treatment cooling,
ISM 900 MHz Ceramic Antenna Ground cleared under antenna, clearance area mm x 8.25 mm. Pulse Part Number: W3012
W0 Datasheet version.. Ceramic Antenna. (0/08). Ceramic Antenna Ground cleared under antenna, clearance area 0.80 mm x 8.5 mm. Pulse Part Number: W0 Features - Omni directional radiation - Low profile
RF series Ultra High Q & Low ESR capacitor series
RF series Ultra High Q & Low ESR capacitor series FAITHFUL LINK Features Application» High Q and low ESR performance at high frequency» Telecommunication products & equipments:» Ultra low capacitance to
Data/LAN Cables Cat 6 F/UTP PVC
Data/LAN Cables Cat 6 F/UTP PVC RoHS REACH Application 10 BASE-T (IEEE 802.3) Ethernet. 100 BASE-T (IEEE 802.3u) Fast Ethernet 100 VG-AnyLAN (IEEE 802.12). 4/6 Mbps Token Ring (IEEE 802.5) 100 Mbps CDDI.
+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
SAW FILTER - RF RF SAW FILTER
FEATURES - Frequencies from 0MHz to 700MHz - Custom specifications available - Industry standard package configurations - Low-loss saw component - Low amplitude ripple - RoHS compliance - Electrostatic
RF CABLE SEMI-RIGID COAXIAL CABLE
RF ABBREVIATIONS FEP PE PTFE PVC SPC SPCW TPC SPEX : Fluorinated Ethylene Propylene : Polyethylene : Polytetrafluoroethylene : Polyvinyl Chloride : Silver Plated Copper : Silver Plated Copperweld : Tin
Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Stamped contacts Crimp male contacts diameter 1,6 mm for wire gauge AWG silver plated Part No. VN (1) Contact Stamped contacts
Stamped contacts Crimp male contacts diameter 1,6 mm for wire gauge AWG - 16 silver plated VN 01 016 0002 ( Series Subseries Contacts Contact Stamped contacts Common Characteristics Contact diameter 1,6
Applications Coaxial cables for high frequency. Coaxial cables from 50 Ω to 95 Ω. Construction
Standard coaxial cables KX & RG coaxial cables KX/RG Applications Coaxial cables for high frequency connections. Coaxial cables from 50 Ω to 95 Ω Construction 1- CONDUCTOR Stranded or solid, in bare copper
THICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Creative TEchnology Provider
1 Oil pplication Capacitors are intended for the improvement of Power Factor in low voltage power networks. Used advanced technology consists of metallized PP film with extremely low loss factor and dielectric
INDEX HOESUNG COIL PARTS
1. Metal Molding High Current SMD Power Inductor PART NO DEMINSION(mm) Inductance Range Rated DC Current Page MMI 06518 SERIES 6.5 7.1 1.8 1.0uH ~ 4.7uH 9.8A ~ 5.0A 5 MMI 06524 SERIES 6.5 7.1 2.4 0.47uH
High-Frequency SMA Connectors 26.5 GHz
High-Frequency SM Connectors 26.5 GHz Volume 1 Table of contents on page 2 ISO9001:2000 Certified (978) 927-1060 www.deltarf.com SM 26.5 GHz Connectors General Description These extended-frequency, general-purpose
Thin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
NMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat (Epoxy)
ARN series Thin Film High Precision Chip Resistor Features» Advanced thin film technology» Very tight tolerance down to ±0.01%» Extremely low TCR down to ±5ppm/» Wide resistance range 1ohm-3Mega ohm» Miniature
LR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
WEB Series. RoHS Compliant. Waterproof Miniature Circular Connector SPECIFICATION MATERIAL/FINISH WEB FEATURE
Series RoHS ompliant Waterproof Miniature ircular onnector series connectors meet the performance criteria of most factory automation applications as they are waterproof and withstand exposure to water,
Metal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication
Chilisin Electronics Singapore Pte Ltd
hilisin Electronics ingapore Pte Ltd High urrent hip Beads, PBY eries Feature: Our MD High urrent hips Beads is specially designed to with tand large urrents while providing a means of EMI/RFI attenuation
4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
FOR CONNECTING PC BOARD TO PC BOARD
FOR ONNETIN P BOR TO P BOR FN-2(H) SERIES (SUPPORTS HIH-SPEE SINLS) FETURES round contacts are between rows of signal terminals and the connector is covered with a metal ground shell, for impedance matching
FP series Anti-Bend (Soft termination) capacitor series
FP series Anti-Bend (Soft termination) capacitor series Features Applications» High performance to withstanding 5mm of substrate» For general digital circuit bending test guarantee» For power supply bypass
FEATURES APPLICATION PRODUCT T IDENTIFICATION PRODUCT T DIMENSION MAG.LAYERS
FEATURES RoHS compliant. Super low resistance, ultra high current rating. High performance (I sat) realized by metal dust core. Frequency Range: up to 1MHz. APPLICATION PDA, notebook, desktop, and server
E62-TAB AC Series Features
NEW! E62-TAB AC Series Features Perfect for non-sinusoidal voltages and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated
WLCW1005 SMD Wire Wound Ceramic Chip Inductors
WCW1005 SMD Wire Wound Ceramic Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WCW1005 Series_V5.0 Mar. 2016 Features 1. Standard chip size bobbin with
CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Data sheet Thin Film Chip Inductor AL Series
Data sheet Thin Film Chip Inductor AL Series Scope - 0201 and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and
LR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
MIL-C-5015 Connector Series
ircular onnector --5015 onnector eries K15-228- type connector K15-228- series circular connectors are used extensively in line connections between electrical equipment,various instruments and meters.
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
HIGH CURRENT POWER INDUCTORS / AMPI ED Type Series
ARLITECH ELECTRONIC CORP. TEL:886-2-2999-8313 FAX:886-2-2995-7520 E-mail:sales@arlitech.com.tw HIGH CURRENT POWER INDUCTORS / AMPI ED Type Series Features High performance realized by metal core Compact
ELWOOD HIGH PERFORMANCE MOTORS H-SERIES MOTOR DATA
H-SERIES MOTOR DATA MOTOR MODEL H-3007 H-3016 H-4030-P H-4030-M H-4040 H-4050 H-4075 H-6100 H-6200 H-6300 MECHANICAL DATA (1) Rated Torque, Cont (Stall) 0.8 2.3 3.4 3.4 5.0 6.8 10.2 11.3 22.6 36.7 lb-in
C4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
Current Sense Metal Strip Resistors (CSMS Series)
Features: Range: 1mΩ to 100mΩ Low TCR as low as 75PPM High power rating Custom Values available RoHS Compliant and Halogen Free Operating Temperature: -55 C to +170 C Part Number Structure CSMS 0805 -
RSDW08 & RDDW08 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (Typ.) CAPACITOR LOAD (MAX.) RSDW08F-03 344mA 3.3V 2000mA 80% 2000μF RSDW08F-05
Chip Ferrite Bead MCB-S/B Series
Chip Ferrite Bead MCB-S/B Series Features Monolithic inorganic material construction Closed magnetic circuit avoids crosstalk SMD Type & suitable for reflow and wave soldering Available in various sizes
Thin Film Precision Chip Resistor-AR Series
hin Film Precision Chip Resistor-AR Series Construction L D1 3 4 5 6 D2 9 8 7 1 2 1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat
Sunlord. Wire Wound SMD Power Inductors SWCS Series SWCS XXXX -XXX T. Operating Temperature: -25 ~ +105 FEATURES APPLICATIONS PRODUCT IDENTIFICATION
Wire Wound SMD Power Inductors SWCS Series Operating Temperature: -25 ~ +105 FEATURES Various high power inductors are superior to be high saturation Suitable for surface mounting equipment APPLICATIONS
NTC Thermistor:SCK Series
Features. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φmm:-40~+70
Raychem Cheminax RF Coaxial Cables and RF Connectors Selection Guide
Raychem Cheminax RF Coaxial s and RF Connectors Selection Guide Cheminax coaxial cables were designed to solve interconnect problems in electronic systems, such as computers, military equipment, and other
Lowara SPECIFICATIONS
SH Series Centrifugal pumps entirely made of AISI 36 stainless steel according to EN 733 (ex DIN 24255). Designed to pump hot, cold and moderately aggressive liquids. Available versions: SHE Close-coupled
Carbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
PRODUCT IDENTIFICATION SWPA 3012 S 1R0 N T
Wire Wound SMD Power Inductors SWPA Series Operating temperature range: -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded conruction reduces buzz noise to ultra-low levels Metallization
Specifications C2504 SERIES. Standards E E326732
Specifications Current rating:3 C,DC Voltage rating:250v C,DC Temperature range:-40 C~+105 C Contact resistance:20mω Max. Insulation resistance:1000mω Min. Withstanding voltage:1000v C/minute *Compliant
Bulletin 1489 UL489 Circuit Breakers
Bulletin 489 UL489 Circuit Breakers Tech Data 489-A Standard AC Circuit Breaker 489-D DC Circuit Breaker 489-A, AC Circuit Breakers 489-D, DC Circuit Breakers Bulletin 489-A Industrial Circuit Breaker
Series AM2DZ 2 Watt DC-DC Converter
s Single output FEATURES: RoHS Compliant Operating temperature -40 o C to + 85 o C Low ripple and noise Pin compatible with multiple manufacturers High efficiency up to 82% Input / Output Isolation 1000,3000,
Bluetooth / WLAN / WiFi Ceramic Chip Antenna Ground cleared under antenna, clearance area 4.00 x 4.25/6.25 mm. Pulse Part Number W3008, W3008C
W8 Datasheet version.7. ceramic antenna. (/) Ground cleared under antenna, clearance area 4. x 4.5/6.5 mm. Pulse Part Number W8, W8C Features - Omni directional radiation - Low profile - Compact size W
Terminal Contact UL Insulation Designation (provided with) style form system approval Flux tight
eatures A miniature PCB Power Relay. form A contact configuration with quick terminal type. 5KV dielectric strength, K surge voltage between coils to contact. Ideal for high rating Home Appliances of heating
Pipe E235N (St 37.4 NBK) phosphated and oiled
Pipe E235N (St 37.4 NBK) phosphated and oiled Working Pressure Burst Pressure 4X1ST37.4NBK* 4 x 1.0 3201041000 397 459 555 2600 0.07 6X1ST37.4NBK 6 x 1.0 3201061000 252 289 394 1560 0.12 6X1.5ST37.4NBK
5V/9V/12V Output QC2.0+USB Auto Detect+USB-PD Type-C Application Report ACT4529
FEATURES 5V/9V/12V Output QC2.0+USB Auto Detect+USB-PD Type-C Application Report ACT4529 Wide input voltage range from 6V to 32V Transparent input voltage surge up to 40V QC2.0 decoding, 5V/9V/12V output
AT Surface Mount Package SOT-363 (SC-70) I I Y. Pin Connections B 1 C 1 E 1 E 2 C 2 B , 7:56 PM
AT-3263 Surface Mount Package SOT-363 (SC-7) I I Y Pin Connections B 1 C 1 E 1 E 2 C 2 B 2 Page 1 21.4., 7:6 PM Absolute Maximum Ratings [1] Absolute Thermal Resistance [2] : Symbol Parameter Units Maximum
Precision Metal Film Fixed Resistor Axial Leaded
Features EIA standard colour-coding Non-Flame type available Low noise and voltage coefficient Low temperature coefficient range Wide precision range in small package Too low or too high ohmic value can
SMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
Sunlord. Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) 2R2 SPH
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Features. Terminal Contact Enclosure style style form Open type Dust cover Ears on cover Antirotation-tab Ears on top
SONG CHUN Features 20/2 general purpose Power Relays. SPDT, DPDT, TPDT contact configurations. DC & C coils are both available. Optional for flange covers, tapped core w/anti-rotation tab, indicator lamp,