TERMINATIONS FOR SPACE / THERMAL VACUUM APPLICATIONS
|
|
- Σωσιγένης Μιχαηλίδης
- 7 χρόνια πριν
- Προβολές:
Transcript
1 Introduction Terminations are intended to terminate a coaxial transmission in its characteristic impedance. It dissipates the whole R.F. incident power. Heat transfer is done by conduction or convection cooling. Terminations are applied in Test & Measurement, defense, telecommunication, space and Thermal vacuum applications. FEATURES Broadband Low, Medium and High power Low VSWR BENEFITS Connector interface according to applicable MIL, DIN, NF and CEI High repeatability LOW POWER 0.5 to 3 Watts Connectors BMA, BNC, QMA, QN, N, SMA, SMA 2.9, SMB, SMP, SSMA, TNC, 1.0/2.3 range DC to 40 GHz MEDIUM POWER 6 to 30 Watts Connectors BNC, N, SMA, TNC, 7/16 range DC to 18 GHz HIGH POWER 50 to 1000 Watts Connectors N, SMA, TNC, 7/16 range DC to 6 GHz FOR SPACE / THERMAL VACUUM APPLICATIONS Connectors range 1 to 45 Watts SMA, SMA 2.9, SMP, TNC DC to 40 GHz Terminations for Space / thermal vacum applications are not detailled in this document. Please consult us. 20-4
2 Low power terminations,up to 3 watts 1.0/ OHMS ±5% Male R /16-50 OHMS ±5% Male R ±5% Female R BMA - 50 OHMS ±5% Male R ±5% Female R BNC - 50 AND 75 OHMS ±1% Male R (3) (1) (3) ±1% Male R (2) (3) ±1% Male R ±2% Male R ±2% Male R (1) ±2% Female R ,000 50±5% Male R ,000 50±5% Male R (1) ±5% Male R ±5% Male R ±5% Female R ±0.1% Male R (3) ±1% Male R (3) ±1% Male (1) (3) R (1) with bead chain, (2) with cord, (3) resistive pad N - 50 OHMS ±2% Male R ±2% Male R (1) ±2% Female R ±2% Male R ±2% Male R (1) ±2% Male R (2) ±2% Female R ±2% Male R ±2% Male R (1) ±2% Female R (1) with bead chain, (2) with cord QMA - 50 OHMS ±5% Male R ±5% Male R ±5% Male R (1) (1) with bead chain 20-5
3 Low power terminations,up to 3 watts QN - 50 OHMS ±5% Male R SMA - 50 OHMS ±5% Male R ±5% Male R (1) ±5% Female R ±5% Male R ±5% Male R404 A ±5% Male R404 A (1) ±5% Male R404 A (2) ±5% Female R404 A ±5% Male R ±5% Male R404 A ±5% Female R404 A (1) with bead chain, (2) with cord SMA OHMS ±5% Male R ±5% Female R SMB - 50 OHMS ±5% Male R ±5% Female R ±5% Female R (2) ±5% Female R (2) with cord SMC - 50 OHMS ±5% Female R SMP - 50 OHMS ±5% Male R404 A ±5% Female R404 A ±5% Male R ±5% Female R SSMA - 50 OHMS ±5% Male R
4 Low power terminations,up to 3 watts TNC - 50 OHMS ±2% Male R ±2% Male R (1) ±2% Female R ±5% Male R ±5% Male R (1) ±5% Male R ±5% Male R (1) ±5% Female R (1) with bead chain Medium power terminations,up to 30 watts 7/16-50 OHMS ,000 50±5% Male R ,000 50±5% Male R BNC - 50 OHMS N - 50 OHMS ,000 50±5% Male R ,000 50±5% Male R ,000 50±5% Male R ,000 50±5% Male R ,000 50±5% Male R ,000 50±5% Male R ,000 50±5% Male R ,000 50±5% Female R ,000 50±5% Male R ,000 50±5% Male R ±5% Male R ±5% Female R ±5% Male R ±5% Male R ±5% Male R ±5% Female R SMA - 50 OHMS ,000 50±5% Male R ,000 50±5% Female R ,000 50±5% Male R ,000 50±5% Male R ±5% Male R ±5% Female R ±5% Male R ±5% Male R ±5% Male R ±5% Female R
5 Medium power terminations,up to 30 watts TNC - 50 OHMS 7/16-50 OHMS ,000 50±5% Female R , ,000 50±5% Female R , ±5% Male R ±5% Female R ±5% Male R , ±5% Female R , ,000 50±5% Male R , ,000 50±5% Female R , ,000 50±5% Male R , ,000 50±5% Female R , ,000 50±5% Male R ,000 50±5% Male R ,000 50±5% Male R ,000 50±5% Female R ,000 50±5% Male R ,000 50±5% Male R ±5% Male R ±5% Female R ±5% Male R ±5% Male R ±5% Memale R High power terminations,up to 1000 watts 7/16-50 OHMS CONDUCTION COOLING ,000 50±5% Male R ,000 50±5% Female R N - 50 OHMS ,000 50±5% Female R , ,000 50±5% Male R ,000 50±5% Female R ,000 50±5% Male R , ,000 50±5% Female R , ,000 50±5% Male R , ,000 50±5% Female R , ,000 50±5% Male R , ,000 50±5% Female R , ±5% Female R ,000 N - 50 OHMS CONDUCTION COOLING ,000 50±5% Male R ,000 50±5% Female R
6 High power terminations,up to 1000 watts SMA - 50 OHMS ±5% Male R ±5% Female R ±5% Male R , ±5% Female R ,200 TNC - 50 OHMS ±5% Male R ±5% Female R ±5% Male R , ±5% Female R , ,000 50±5% Male R , ,000 50±5% Female R , ,000 50±5% Male R , ,000 50±5% Female R ,900 TNC - 50 OHMS CONDUCTION COOLING ,000 50±5% Male R ,000 50±5% Female R
CMPTER SMA CONNECTORS. ... A Vital Part of Connection World
... A Vital Part of Connection World Receptacles With Accepts Pin Receptacles Metal Through The Wall Receptacles Insulator Through The wall Receptacles Air ine Through The wall Receptacles With Tap Receptacles
CMPTER 2.92MM CONNECTORS. ... A Vital Part of Connection World. Receptacles With Accepts Pin Receptacles, Metal Through The Wall
... A Vital Part of Connection World Receptacles With Accepts Pin Receptacles, Metal Through The Wall Receptacles, Insulator Through The Wall Receptacles, Air ine Through The Wall PCB Connectors 2.92MM
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
INPAQ Global RF/Component Solutions
MCB & MHC W Series Specification Product Name Series Multilayer Chip Ferrite Bead MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516 MCB and MHC Series Chip Ferrite Bead for Automotive Applications
High Current Chip Ferrite Bead MHC Series
High Current Chip Ferrite Bead MHC Series Features Combination of high frequency noise suppression with capability of handing high current. The current rating up to 6 Amps with low DC. Applications High
Electrical Specifications at T AMB =25 C DC VOLTS (V) MAXIMUM POWER (dbm) DYNAMIC RANGE IP3 (dbm) (db) Output (1 db Comp.) at 2 f U. Typ.
Surface Mount Monolithic Amplifiers High Directivity, 50Ω, 0.5 to 5.9 GHz Features 3V & 5V operation micro-miniature size.1"x.1" no external biasing circuit required internal DC blocking at RF input &
Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Multilayer Chip Capacitors C0G/NP0/CH
Multilayer Chip Capacitors C0G/NP0/CH Features Good thermal stability High insulation resistance Low dissipation factor Low inductance Applications Resonant circuits Filter circuits Timing elements Coupling
SMD Power Inductor-VLH
SMD Power Inductor-VH PAD AYOUT Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252510 2.5±0.2
LR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
NTC thermistors for temperature measurement
NTC thermistors for temperature measurement SMD NTC thermistors with nickel barrier termination, case size 0603 Series/Type: Date: June 2008 EPCOS AG 2008. Reproduction, publication and dissemination of
MCB and MHC Series Chip Ferrite Bead for Automotive Applications Qualified based on AEC-Q200
RoHS MC and MHC Series Chip Ferrite ead for Automotive Applications Qualified based on AEC-Q200 Explanation of Part Number MC 1608 W 12 1 H P - 1 2 3 4 5 6 7 8 9 1. Series Name 2. Size Code: the first
LR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
LR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Multilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
2.4mm Series Connectors
2.4mm Series Connectors Table of Contents 2.4mm Series Connectors(DC~50GHz)... 1 2.4mm Replaceable Connectors... 2 2.4mm Receptacle (Round Contact) Connectors... 7 2.4mm Receptacle (Exposed Teflon) Connectors...
Surface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
SMD Power Inductor-VLH
SMD Power Inductor-VH Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 321618C 3.2±0.3 1.6±0.2
SMB SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50Ω impedance for applications up to 4GHz. Suited for cables with dielectric diameters of up to 1.5mm. The connectors
MMCX SERIES Microminiature Coaxial Connectors
SERIES Microminiature Coaxial Connectors FEATURES connectors are smaller than MCX connectors and are used from DC up to 6 GHz in applications where a tiny size is crucial. INTERFACE MATING DIMENSIONS PLUG:
IXBH42N170 IXBT42N170
High Voltage, High Gain BIMOSFET TM Monolithic Bipolar MOS Transistor IXBH42N17 IXBT42N17 S 9 = 1 = 42A (sat) 2.8V Symbol Test Conditions Maximum Ratings TO-247 (IXBH) S = 25 C to 15 C 17 V V CGR = 25
MAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
Applications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
BMA SERIES Subminiature Blind Mate Connectors
SERIES Subminiature Blind Mate Connectors FEATURES The blindmate connectors are designed for blindmate applications up to Ghz. They have a slide-on, non-locking interface which ensures frequent matings
CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Oil grooved pads PFO series
Oil grooved pads PFO series Connector type Top Side Pad with locking fitting PFO K φ20 ~ 40 P237 Barb connector PFOTK PFOYK Pad with spring fitting NAPFO S Stroke(mm) φ20 ~ 40 6,15,30 P239 Female screw
2.92mm Series Connector
2.92mm Series Connector Table of Contents 2.92mm Series Connector(DC~40GHz)... 1 2.92mm Replaceable Connectors... 2 2.92mm Receptacle (Round Contact) Connectors... 7 2.92mm Receptacle (Exposed Teflon)
Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Metal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication
Metal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
RF series Ultra High Q & Low ESR capacitor series
RF series Ultra High Q & Low ESR capacitor series FAITHFUL LINK Features Application» High Q and low ESR performance at high frequency» Telecommunication products & equipments:» Ultra low capacitance to
HIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
Transient Voltage Suppressor
Transient Suppressor Features Glass passivated junction Low incremental surge resistance, excellent clamping capability Underwriters Laboratory Recognition under UL standard for safety 497B: Isolated Loop
Creative TEchnology Provider
1 Oil pplication Capacitors are intended for the improvement of Power Factor in low voltage power networks. Used advanced technology consists of metallized PP film with extremely low loss factor and dielectric
Technical Information Efficiency and Derating SUNNY BOY / SUNNY TRIPOWER / SUNNY MINI CENTRAL
Technical Information Efficiency and Derating SUNNY BOY / SUNNY TRIPOWER / SUNNY MINI CENTRAL WirkungDerat-TI-en-40 Version 4.0 ENGLISH Legal Provisions SMA Solar Technology AG Legal Provisions The information
PCB Footprint Library
PCB Tantalum Capacitors EIA Standard Low Inductance MLCs Chip Film Capacitors SuperCaps Filters TVS Diodes Couplers Crossovers Inductors Timing Devices Resistive Products http://www.avx.com Tantalum Capacitors
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Suitable for DC-DC Converters, Voltage Regulators, Decoupling Applications for Computer Motherboards, etc. Performance Characteristics
+105 C, Higher Ripple, Lower than ULG Features Higher Ripple, Lower than ULG Wide Temperature Range RoHS Compliant Applications Suitable for DC-DC Converters, Voltage Regulators, Decoupling Applications
Metal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Specification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)
High CV-value Long Life > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life Optimized designs available on request RoHS Compliant application Basic design Smoothing, energy storage,
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
B37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
NPN SILICON OSCILLATOR AND MIXER TRANSISTOR
FEATURES NPN SILICON OSCILLATOR AND MIXER TRANSISTOR LOW COST HIGH GAIN BANDWIDTH PRODUCT: ft = MHz TYP LOW COLLECTOR TO BASE TIME CONSTANT: CC r b'b = 5 ps TYP LOW FEEDBACK CAPACITANCE: CRE=.55 pf TYP
Chip Ferrite Bead MCB-S/B Series
Chip Ferrite Bead MCB-S/B Series Features Monolithic inorganic material construction Closed magnetic circuit avoids crosstalk SMD Type & suitable for reflow and wave soldering Available in various sizes
Metal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
C4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
THICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
HORIZON QUANTUM. Logging
HORIZON QUANTUM High Capacity Packet Microwave System FEATURES NETWORK MANAGEMENT (NMS) Capacity w/accelerator Variable from 10 to 2000 Mbps full duplex CIR Management Access In or out of band 2x capacity
Transient Voltage Suppression Diodes: 1.5KE Series Axial Leaded Type 1500 W
Features 1. Reliable low cost construction utilizing molded plastic technique 2. Both bi-directional and uni-directional devices are available 3. Fast response time 4. Excellent clamping capacity 5. 1500
NTC Thermistor:TSM type
Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended
1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Written Examination. Antennas and Propagation (AA ) April 26, 2017.
Written Examination Antennas and Propagation (AA. 6-7) April 6, 7. Problem ( points) Let us consider a wire antenna as in Fig. characterized by a z-oriented linear filamentary current I(z) = I cos(kz)ẑ
4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
YAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.
YAGEO CORPORATION SMD INDUCTOR / BEADS CLH Series Multilayer Chip Inductors High Frequency Lead-free / For High Frequency Applications APPLICATIONS RF Resonance and Impedance Matching Circuit RF and Wireless
FEATURES APPLICATION PRODUCT T IDENTIFICATION PRODUCT T DIMENSION MAG.LAYERS
FEATURES RoHS compliant. Super low resistance, ultra high current rating. High performance (I sat) realized by metal dust core. Frequency Range: up to 1MHz. APPLICATION PDA, notebook, desktop, and server
FP series Anti-Bend (Soft termination) capacitor series
FP series Anti-Bend (Soft termination) capacitor series Features Applications» High performance to withstanding 5mm of substrate» For general digital circuit bending test guarantee» For power supply bypass
Thin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
SMBJ SERIES. SMBG Plastic-Encapsulate Diodes. Transient Voltage Suppressor Diodes. Peak pulse current I PPM A with a 10/1000us waveform See Next Table
SMBJ SERIES SMBG Plastic-Encapsulate Diodes HD BK 7 Transient Suppressor Diodes Features P PP 6W V RWM 5.V- 44V Glass passivated chip Applications Clamping Marking SMBJ XXCA/XXA/XX XX : From 5. To 44 SMBG
MARKET INTRODUCTION System integration
MARKET INTRODUCTION System integration Air to Water Split System Inverter Driven Nomιnal Capacities : 5-6,5-9 - 11,5 kwth Max LWT= 60 C & Min OAT = -15 C COP>= 4.1 Air to Water Monoblock Inverter Driven
High Performance Voltage Controlled Amplifiers Typical and Guaranteed Specifications 50 Ω System
High Performance Voltage Controlled Amplifiers Typical and Guaranteed Specifications 50 Ω System Typical and guaranteed specifications vary versus frequency; see detailed data sheets for specification
NTC Thermistor:SCK Series
Features. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φmm:-40~+70
First Sensor Quad APD Data Sheet Part Description QA TO Order #
Responsivity (/W) First Sensor Quad PD Data Sheet Features Description pplication Pulsed 16 nm laser detection RoHS 211/65/EU Light source positioning Laser alignment ø mm total active area Segmented in
Thin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) Type EI Size Power Rating at 70
Data sheet Thin Film Chip Inductor AL Series
Data sheet Thin Film Chip Inductor AL Series Scope - 0201 and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and
ΠΡΟΣΚΛΗΣΗ ΕΝΔΙΑΦΕΡΟΝΤΟΣ KAI ΚΑΤΑΘΕΣΗΣ ΠΡΟΣΦΟΡΩΝ ΓΙΑ ΤΗΝ ΑΝΑΘΕΣΗ ΤΗΣ ΠΡΟΜΗΘΕΙΑΣ
ΕΘΝΙΚΟ ΚΕΝΤΡΟ ΕΡΕΥΝΑΣ ΚΑΙ ΤΕΧΝΟΛΟΓΙΚΗΣ ΑΝΑΠΤΥΞΗΣ (Ε.Κ.Ε.Τ.Α.) / Ινστιτούτο Βιώσιμης Κινητικότητας και Δικτύων Μεταφορών (ΙΜΕΤ) Θεσσαλονίκη, 29-05-2017 Αριθμ. Πρωτ.: 000158 ΠΡΟΣΚΛΗΣΗ ΕΝΔΙΑΦΕΡΟΝΤΟΣ KAI ΚΑΤΑΘΕΣΗΣ
Thin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) RoHS Compliant includes all homogeneous
Thin Film Precision Chip Resistor-AR Series
hin Film Precision Chip Resistor-AR Series Construction L D1 3 4 5 6 D2 9 8 7 1 2 1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat
Metal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
Polymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
+85 C Screw Terminal Aluminum Electrolytic Capacitors. For filtering applications. Capacitance change Dissipation factor Leakage current
For filtering applications FEATURES High ripple current High reiability range: 270µF to 680,000µF Voltage range: 6.3 to 450 SPECIFICATIONS Tolerance ±20% at 120 Hz, 25 C Operating Temperature Range Dissipation
Operating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
2.92mm. Precision 40GHz Connectors
2.92mm Precision 40GHz Connectors 2.92mm Precision Connectors ESCRIPTION 2.92mm connectors are 50ohm precision connector designed to operate up to 40GHz. The outer conductor measures 2.92mm and has a strong
Data Sheet High Reliability Glass Epoxy Multi-layer Materials (High Tg & Low CTE type) Laminate R-1755V Prepreg R-1650V
Data Sheet High Reliability Glass Epoxy Multi-layer Materials (High Tg & Low CTE type) Laminate R-1755V Prepreg R-1650V Nov. 2015 No.15111336 Specification / Laminate R-1755V No.; 15111336-1 Property Units
Digital motor protection relays
Digital motor protection relays Specification DMP -S & DMP -Sa DMP -T & DMP -Ta Model No. DMP06-S/Sa DMP60-S/Sa DMP06-T/Ta DMP60-T/Ta Wiring Screw type Tunnel type Panel mount Unit or Extension Note1)
Alféa Extensa + and Extensa Duo +
Alféa Extensa + and Extensa Duo + FR Document n 1592-2~ 12/07/2013 EN Heat pumps air/water split 1 service and 2 services Technical manual Intended for professionals Completed by the installation and operating
SMD Shielded Power Inductors SPIA Series. SPIA Series. Product Identification
SPIA Series SPIA series is an automatic assembly constructed power inductor which is shielded with ferrite core. It is ideal for portable device DC-DC converter line. Features RoHS Compliant Miniature
DERATING ELECTRICAL STRESS ANALYSIS REPORT FOR THE SAM POWER SUPPLY. Prepared by
DERATING ELECTRICAL STRESS ANALYSIS REPORT FOR THE SAM POWER SUPPLY Prepared by Sample Company 111 Foothill Blvd. Suite E-156 La Canada Flintridge, California 91011 Copyright 2002 by Probabilistic Software,
ISM 868 MHz Ceramic Antenna Ground cleared under antenna, clearance area mm x 8.25 mm. Pulse Part Number: W3013
W0 Datasheet version.. Ceramic Antenna. (0/08). Ceramic Antenna Ground cleared under antenna, clearance area 0.80 mm x 8.5 mm. Pulse Part Number: W0 Features - Omni directional radiation - Low profile
1.575 GHz GPS Ceramic Chip Antenna Ground cleared under antenna, clearance area 4.00 x 4.25 mm / 6.25 mm. Pulse Part Number: W3011 / W3011A
W0 Datasheet version. ceramic antenna. (09/08).575 GHz Ceramic Chip Antenna Ground cleared under antenna, clearance area x 4.5 mm / 6.5 mm. Pulse Part Number: W0 / W0A Features - Omni directional radiation
SMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
Technical Data Catalog
42 to 65 khz-a (Broadband) Transformed to 100 ohms minimum (B1) 42 to 65 khz 1 kw 25 W Power Rating: 1 kw @ 1% duty cycle CW (4) : 25W in B265, PM265 15W in M265, TM265 7 x 28.6 mm (1.13 in) PZT Active
DC-DC converter circuits for mobile phones, wearbale devices, DVCs, HDDs, etc.
Multilayer Chip Power Inductor MPH Series Operating Temp. : -40 ~+85 FEATURES Higher DC bias current and lower DC resistance due to Trench Technology Low profile and thin thickness Monolithic structure
High Speed, Low Loss Multi-layer Materials
Data Sheet High Speed, Low Loss Multilayer Materials Laminate R5725 Prepreg R5620 UL/ANSI IPC4101 Slash Sheet FR4 Primary:/91 Secondary:/102(*) Jul. 2013 No.13070132 No.; 130701321 Property Units Test
Output Power: W. Exclusively distributed by Powerstax
R Series, 50-150W Input Ranges : 9-75 VDC : Single - Dual /, / /, / Triple / ±, /, / ±0, Quad ± / ±, ± / : 50-150 W FEATURES General: to 100 Watts Wide Input Range : 10-7dc 2:1 & 3:1 Input Range High Conversion
ΠΑΝΕΠΙΣΤΗΜΙΟ ΠΑΤΡΩΝ ΤΜΗΜΑ ΗΛΕΚΤΡΟΛΟΓΩΝ ΜΗΧΑΝΙΚΩΝ ΚΑΙ ΤΕΧΝΟΛΟΓΙΑΣ ΥΠΟΛΟΓΙΣΤΩΝ ΤΟΜΕΑΣ ΣΥΣΤΗΜΑΤΩΝ ΗΛΕΚΤΡΙΚΗΣ ΕΝΕΡΓΕΙΑΣ ΕΡΓΑΣΤΗΡΙΟ ΥΨΗΛΩΝ ΤΑΣΕΩΝ
ΠΑΝΕΠΙΣΤΗΜΙΟ ΠΑΤΡΩΝ ΤΜΗΜΑ ΗΛΕΚΤΡΟΛΟΓΩΝ ΜΗΧΑΝΙΚΩΝ ΚΑΙ ΤΕΧΝΟΛΟΓΙΑΣ ΥΠΟΛΟΓΙΣΤΩΝ ΤΟΜΕΑΣ ΣΥΣΤΗΜΑΤΩΝ ΗΛΕΚΤΡΙΚΗΣ ΕΝΕΡΓΕΙΑΣ ΕΡΓΑΣΤΗΡΙΟ ΥΨΗΛΩΝ ΤΑΣΕΩΝ Διπλωµατική Εργασία Της Φοιτήτριας του Τµήµατος Ηλεκτρολόγων
YJM-L Series Chip Varistor
Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
NMOQSPEC NMO5T. The most commonly used cable assembly/mount is the NMOKHFUD (27 MHz to 6 GHz) with 17 of UD (RG-58/U Dual Shield).
700/800/900/1850 mhz coils/whips Model Type (MHz) (dbd/dbi) (In) (Watts) Color Assembly Conn LM800 5/8 over 1/2 λ 806-866 3.5/5.6 14.5 200 Stainless Order Separately N/A LM825 5/8 over 1/2 λ 824-896 3.5/5.6
GenX3 TM 300V IGBT IXGA42N30C3 IXGH42N30C3 IXGP42N30C3 V CES = 300V I C110. = 42A V CE(sat) 1.85V t fi typ. = 65ns
GenX3 TM V IGBT High Speed PT IGBTs for -1kHz switching IXGA42NC3 IXGH42NC3 IXGP42NC3 V CES = V 1 = 42A V CE(sat) 5V t fi typ = 65ns TO-263 (IXGA) Symbol Test Conditions Maximum Ratings V CES = 25 C to
ΤΕΙ ΚΑΒΑΛΑΣ ΣΧΟΛΗ ΤΕΧΝΟΛΟΓΙΚΩΝ ΕΦΑΡΜΟΓΩΝ ΤΜΗΜΑ ΗΛΕΚΤΡΟΛΟΓΙΑΣ ΠΤΥΧΙΑΚΗ ΕΡΓΑΣΙΑ
ΤΕΙ ΚΑΒΑΛΑΣ ΣΧΟΛΗ ΤΕΧΝΟΛΟΓΙΚΩΝ ΕΦΑΡΜΟΓΩΝ ΤΜΗΜΑ ΗΛΕΚΤΡΟΛΟΓΙΑΣ ΠΤΥΧΙΑΚΗ ΕΡΓΑΣΙΑ ΜΕΛΕΤΗ ΦΩΤΟΒΟΛΤΑΙΚΟΥ ΠΑΡΚΟΥ ΜΕ ΟΙΚΙΣΚΟΥΣ ΓΙΑ ΠΑΡΑΓΩΓΗ ΗΛΕΚΤΡΙΚΗΣ ΕΝΕΡΓΕΙΑΣ ΜΕΣΗΣ ΤΑΣΗΣ STUDY PHOTOVOLTAIC PARK WITH SUBSTATIONS
Project: 296 File: Title: CMC-E-600 ICD Doc No: Rev 2. Revision Date: 15 September 2010
Project: 296 File: Title: CMC-E-600 ICD Doc No: 21029100-406 Rev 2. Revision Date: 15 September 2010 Contract No.: Revisions Table ECR/ECN LTR Description Date 0 Pre Contract draft 29 July 2010 1 Replace
INDEX HOESUNG COIL PARTS
1. Metal Molding High Current SMD Power Inductor PART NO DEMINSION(mm) Inductance Range Rated DC Current Page MMI 06518 SERIES 6.5 7.1 1.8 1.0uH ~ 4.7uH 9.8A ~ 5.0A 5 MMI 06524 SERIES 6.5 7.1 2.4 0.47uH
Prepolarized Microphones-Free Field
Prepolarized Microphones-Free Field MP0 / MP3 / MP / MP / MP / MP / MP8 MP0 MP3 MP MP MP MP MP8 Standards (IEC7) I I I.3 ~ 0k 3 ~ 0k 0 ~.k 0 ~.k 0 ~ 70k 0 ~ k 0 ~ k Open-circuit Sensitivity (mv/pa) (±db)
Problem 7.19 Ignoring reflection at the air soil boundary, if the amplitude of a 3-GHz incident wave is 10 V/m at the surface of a wet soil medium, at what depth will it be down to 1 mv/m? Wet soil is
HIGH CURRENT POWER INDUCTORS / AMPI ED Type Series
ARLITECH ELECTRONIC CORP. TEL:886-2-2999-8313 FAX:886-2-2995-7520 E-mail:sales@arlitech.com.tw HIGH CURRENT POWER INDUCTORS / AMPI ED Type Series Features High performance realized by metal core Compact
Α ιθ EL. 3. Κα ασ ασ ής: fischerwerke GmbH & Co. KG, Klaus-Fischer-Straße 1, Waldachtal, α ία. Tumlingen,
Η ΩΣΗ ΠΙ ΟΣ Ω Α ιθ. 0020 EL 1. Μο α ι ός ω ι ός α ο οί σ ς ο ύ ο ο οϊό ος: fischer η ώ α ο ώ α ύ ιο FH II, FH II-I 2. Π οβ ό - ς χ ήσ - ις : Π οϊό Α ύ ιο ιασ ο ής χό ς α ό ο ι έ η/ ς ήση/ ις ω σ έ ω σ
Thin Film Chip Inductor
Scope -Calchip s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Calchip s design provides high, excellent Q, and superior temperature stability. This highly
CSKA series. Current Sensing Chip Resistor Automotive. Features. Applications. Construction FAITHFUL LINK
CSKA series Current Sensing Chip Resistor Automotive Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate