SMD Multilayer Ferrite Chip Beads. Multilayer Ferrite Chip beads. Product Identification. Dimension Conversion
|
|
|
- Ἐλιακείμ Ζερβός
- 6 χρόνια πριν
- Προβολές:
Transcript
1 SMD Multilayer Ferrite Chip Beads Multilayer Ferrite Chip beads Chilisin offers hundreds of multi-layered ferrite chip beads with various sizes, frequency characteristics, and a wide range of impedance values to provide powerful solutions for EMI problems. Three formulas of ferrite compose several types of EMI suppression chip beads that are classified into six categories- SB, GB, PB, UPB, NB, and HF series. Product Identification Product Symbol: SB, GB, PB, UPB, NB, HF Packaging: T:Tape and eel;b:bulk Tolerance: Y = ± 2%; M = ± 2%; T:±3% Note: ohs Compliant Shapes and Dimensions ecommended Pattern Dimensions in mm Dimensions in mm TYPE A B C D :SB / PB :SB / PB / NB / HF :SB / PB / NB / GB / UPB * :SB / PB / NB / GB / UPB / HF :UPB :SB / GB :SB / PB / GB :SB / PB / GB / UPB Dimension Conversion TYPE A B C ~.3.7 ~ ~ ~ ~ 2..6 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ Don t apply narrower pattern than listed above to PBY and UPB. Narrow pattern might cause excessive heat or open circuit. Code Dimension in mm (AxBxC) EIA x.8x x1.2x x1.6x x1.6x x2.x x1.6x x3.2x
2 DC esistance ated current (Ω±2%) SBY633T-1V-N 1 1±Ω.1 SBY633T-6T-N 1 6±3%.4 2 SBY633T-121Y-N SBY633T-6T-N 2 SBY633T-121Y-N FEQUENCY DC<.4 Ω ated Current :2 ma FEQUENCY DC<. Ω ated Current :2 ma
3 DC esistance ated current (Ω±2%) SBYT-6Y-N 1 6. SBYT-1Y-N 1 1. SBYT-22Y-N SBYT-4Y-N SBYT-6Y-N SBYT-7Y-N SBYT-8Y-N SBYT-9Y-N SBYT-11Y-N SBYT-121Y-N SBYT-241Y-N SBYT-31Y-N SBYT-331Y-N SBYT-6Y-N FEQUENCY DC<. Ω ated Current : ma SBYT-1Y-N FEQUENCY DC<. Ω ated Current : ma SBYT-3Y-N FEQUENCY DC<.2 Ω ated Current : ma SBYT-4Y-N FEQUENCY DC<.2 Ω ated Current : ma SBYT-8Y-N FEQUENCY DC<.2 Ω ated Current : ma 2 SBYT-121Y-N FEQUENCY DC<.2 Ω ated Current : ma SBYT-241Y-N FEQUENCY DC<.4 Ω ated Current :4 ma SBYT-31Y-N FEQUENCY DC<. Ω ated Current :3 ma
4 DC esistance ated current (Ω±2%) SBK1688T-6Y-N 1 6. SBK1688T-7Y-N 1 7. SBK1688T-11Y-N SBK1688T-19Y-N SBK1688T-3Y-N SBK1688T-4Y-N SBK1688T-6Y-N SBK1688T-8Y-N SBK1688T-121Y-N SBK1688T-221Y-N SBK1688T-31Y-N SBK1688T-41Y-N SBK1688T-61Y-N SBK1688T-71Y-N SBK1688T-12Y-N SBK1688T-2Y-N SBK1688T-222Y-N SBK1688T-272Y-N SBK1688T-11Y-N FEQUENCY DC<. Ω ated Current : ma SBK1688T-19Y-N FEQUENCY DC<.8 Ω ated Current : ma SBK1688T- 3Y-N FEQUENCY DC<.1 Ω ated Current : SBK1688T-4Y-N FEQUENCY DC<.1 Ω ated Current :4 ma SBK1688T-6Y-N FEQUENCY DC<.1 Ω ated Current :4 ma SBK1688T-8Y-N FEQUENCY DC<. Ω ated Current :4 ma
5 SBK1688T-19Y-N FEQUENCY DC<.8 Ω ated Curr ent : ma SBK1688T-221Y-N FEQUENCY DC<.3 Ω ated Curr ent :3 ma SBK1688T-31Y-N FEQUENCY DC<.4 Ω ated Current :3 ma SBK1688T-41Y-N FEQUENCY DC<. Ω ated Cur rent :3 ma SBK1688T-61Y-N FEQUENCY DC<. Ω ated Current :3 ma SBK1688T-71Y-N FEQUENCY DC<.6 Ω ated Current :3 ma SBK1688T-12Y-N F EQUENC Y (M Hz ) DC<.6 Ω ated Current :2 ma SBK1688T-2Y-N FEQUENCY DC<.6 Ω ated Current :3 ma SBK1688T-222Y-N FEQUENCY DC<.8 Ω ated Current :2 m A
6 DC esistance ated current (Ω±2%) SBY2129T-7Y-N SBY2129T-9Y-N SBY2129T-11Y-N SBY2129T-17Y-N SBY2129T-32Y-N SBY2129T-4Y-N SBY2129T-6Y-N 1 6. SBK2129T-6Y-N 1 6. SBK2129T-7Y-N 1 7. SBK2129T-8Y-N 1 8. SBK2129T-121Y-N SBK2129T-1Y-N SBK2129T-221Y-N SBK2129T-31Y-N SBK2129T-41Y-N SBK2129T-1Y-N SBK2129T-61Y-N SBK2129T-71Y-N SBK2129T-12Y-N SBK2129T-2Y-N SBK2129T-22Y-N SBK2129T-222Y-N SBK2129T-22Y-N SBK2129T-272Y-N SBY2129T-11Y-N FEQUENCY DC<. 1 Ω ated Curr ent :6 ma SBK2129T-6Y-N FEQUENCY DC<. Ω ated Cur rent : ma SBY2129T-17Y-N FEQUENCY DC<.1 Ω ated Curr ent :6 ma SBK2129T-7Y-N FEQUENCY DC<. Ω ated Curr ent : ma SBY2129T-32Y-N FEQUENCY DC<.1 Ω ated Cur rent :6 ma SBK2129T-8Y-N FEQUENCY DC<. Ω ated Curr ent : ma
7 SBK2129T-121Y-N FEQUENCY (MHz ) DC<.2 Ω ated Current :3 ma SBK2129T-1Y-N F EQUENC Y (M Hz ) DC<.2 Ω ated Current :3 ma SBK2129T-221Y-N FEQUENCY DC<.3 Ω ated Cur rent :3 ma SBK2129T-31Y-N FEQUENCY DC<.3 Ω ated Cur rent :3 ma SBK2129T-41Y-N FEQUENCY DC<.3 Ω ated Cur rent :3 ma SBK2129T-1Y-N FEQUENCY DC<.4 Ω ated Curren t :3 ma SBK2129T-61Y-N FEQUENCY DC<.4 Ω ated Current :3 ma SBK2129T-71Y-N FEQUENCY DC<. Ω a ted Cu rrent :2 ma SBK2129T-12Y-N FEQUENCY DC<. Ω ated Current :2 ma SBK2129T-2Y-N FEQUENCY DC<.6 Ω ated Curren t :2 ma SBK2129T-22Y-N FEQUENCY DC<.7 Ω ated Cur rent :2 ma SBK2129T-222Y-N FEQUENCY DC <.7 Ω ated Current :2 ma SBK2129T-22Y-N FEQUENCY DC<.7 Ω ated Current :2 ma SBK2129T-272Y-N FEQUENCY DC<.7 Ω ated Current :2 ma
8 (Ω±2%) DC esistance ated current SBY321611T-8Y-N SBY321611T-11Y-N SBY321611T-19Y-N SBY321611T-26Y-N SBY321611T-32Y-N SBY321611T-Y-N 1.1 SBY321611T-6Y-N SBK321611T-7Y-N SBK321611T-9Y-N 1 9. SBK321611T-121Y-N SBK321611T-1Y-N 1. SBK321611T-21Y-N SBK321611T-41Y-N SBK321611T-1Y-N SBK321611T-61Y-N SBK321611T-12Y-N SBK321611T-122Y-N SBK321611T-2Y-N.4 2 SBK321611T-22Y-N SBK321611T-272Y-N SBY321611T-19Y-N FEQUENCY DC<. Ω ated Curr ent :6 ma SBY321611T-26Y-N FEQUENCY DC<. Ω ated Cur rent :6 ma SBY321611T-32Y-N FEQUENCY DC<. Ω ated Current :6 ma SBY321611T-Y-N F EQUENCY (M Hz ) DC<.1 Ω ated Current : ma SBY321611T-6Y-N FEQUENCY DC<.1 Ω ated Current : ma SBK321611T-7Y-N FEQUENCY DC<.1 Ω ated Current : ma
9 SBK321611T-9Y-N FEQUENCY DC<. Ω ated Current : ma SBK321611T-121Y-N FEQUENCY DC<. Ω ated Curren t : ma SBK321611T-121Y-N FEQUENCY DC<. Ω ated Curren t : ma SBK321611T-1Y-N FEQUENCY DC<.2 Ω ated Current :4 ma SBK321611T-61Y-N FEQUENCY DC<.3 Ω ated Curre nt :4 ma SBK321611T-12Y-N FEQUENCY DC<.4 Ω ated Current :2 ma SBK321611T-2Y-N FEQUENCY DC<.4 Ω ated Current :2 ma SBK321611T-22Y-N FEQUENCY DC<.6 Ω ated Current :2 ma DC esistance ated current (Ω±2%) SBY321616T-2Y-N SBY321616T-6Y-N SBK321616T-7Y-N SBY321616T-6Y-N FEQUENCY DC<.2 Ω ated Current : ma SBK321616T-7Y-N FEQUENCY DC<.2 Ω ated Current : ma
10 DC esistance ated current (Ω±2%) SBY32213T-32Y-N SBY32213T-6Y-N SBY32213T-9Y-N SBY32213T-121Y-N SBY32213T-32Y-N FEQUENCY DC<.2 Ω ated Cur rent : ma SBY32213T-6Y-N FEQUENCY DC<. 2 Ω ated Curr ent : ma SBY32213T-9Y-N FEQUENCY DC<.2 Ω ated Cur rent : ma DC esistance ated current (Ω±2%) SBY41616T-33Y-N SBY41616T-Y-N SBY41616T-6Y-N SBY41616T-8Y-N SBY41616T-11Y-N SBK41616T-1Y-N 1.3 SBK41616T-171Y-N SBY41616T-Y-N FEQUENCY DC<.2 Ω ated Current :6 ma SBY41616T-6Y-N FEQUENCY DC<.2 Ω ated Curren t :6 ma SBY41616T-8Y-N FEQUENCY DC<.2 Ω ated Cur rent :6 ma
11 DC esistance ated current (Ω±2%) SBY432T-7Y-N SBY432T-121Y-N SBY432T-12Y-N SBY432T-131Y-N SBY432T-1Y-N SBY432T-7Y-N FEQUENCY DC<.3 Ω ated Current : ma SBY432T- 121Y- N FEQUENCY DC<.3 Ω ated Cu rrent : ma
12 SMD Multilayer Chip Beads Packaging Specifications Tape Dimensions Tape Material eel Dimensions :SB / PB :SB / PB / NB / HF :SB / PB / NB / GB / UPB :SB / PB / NB / GB / UPB / HF :UPB :SB / GB :SB / PB / GB :SB / PB / GB / UPB Dimensions in mm TYPE Tape Dimensions eel Dimensions Quantity A B T W P F K Tape Type. A B C D PCS / EEL B B B B A A A A A A
SMD Multilayer Ferrite Chip Beads. Multilayer Ferrite Chip Beads. Product Identification. Dimension Conversion
SMD Multilayer Ferrite Chip Beads Multilayer Ferrite Chip Beads Chilisin offers a wide range of multi-layered ferrite chip beads with various sizes, frequency characteristics, and impedance values for
SMD Multilayer Ferrite Chip Beads. Multilayer Ferrite Chip Beads. Product Identification. Dimension Conversion
SMD Multilayer Ferrite Chip Beads Multilayer Ferrite Chip Beads Chilisin offers a wide range of multi-layered ferrite chip beads with various sizes, frequency characteristics, and impedance values for
SMD Multilayer Ferrite Chip Beads. Multilayer Ferrite Chip Beads. Product Identification. Dimension Conversion
SMD Multilayer Ferrite Chip Beads Multilayer Ferrite Chip Beads Chilisin offers a wide range of multi-layered ferrite chip beads with various sizes, frequency characteristics, and impedance values for
Multilayer Ferrite Chip Beads
ultilayer Ferrite hip Beads hilisin offers a wide range of multi-layered ferrite chip beads with various sizes, frequency characteristics, and impedance values for solutions. These ferrite formulas are
SB/NB/HF/GB/PB/UPB. SMD Chip Beads OUTLINE PRODUCT IDENTIFICATION SHAPES AND DIMENSIONS
Yageo corporation INDUCTORS / BEADS SMD Chip Beads SB/NB/HF/GB/PB/UPB OUTLINE Yageo offers hundreds of multi-layered ferrite chip beads with various sizes, frequency characteristics, and a wide range of
Ferrite Chip Bead(Lead Free)
Ferrite Chip Bead(Lead Free) YCM-Series 1.Features 1. Monolithic inorganic material construction. 2. Closed magnetic circuit avoids crosstalk. 3. S.M.T. type. 4. Suitable for reflow soldering. 5. Shapes
Multilayer Ferrite Chip Beads / CM Series Feature Application Product Identification CM 1608 RL 120 Configurations & Dimensions Series Name Unit: mm
Feature. Monolithic inorganic material construction 2. Closed magnetic circuit avoide crosstalk 3. S.M.T. type 4. Suitable for flow and reflow soldering 5. Shapes and dimensions follow E.I.A. SPEC 6. Available
High Current Chip Ferrite Bead MHC Series
High Current Chip Ferrite Bead MHC Series Features Combination of high frequency noise suppression with capability of handing high current. The current rating up to 6 Amps with low DC. Applications High
SMD Wire Wound Ferrite Chip Inductors - SQC Series. SQC Series. Product Identification. Shapes and Dimensions
SMD Wire Wound Ferrite Chip Inductors - SQC Series SQC Series These miniature chip inductors, SQC Series, wound on a special ferrite core and are excellent to be used as choke coil in DC power supply circuits.
Feature. 8. High reliability. Application. 1. Series name. 2. Dimension. ( See Details ) 3. Material ± ± ± ± 0.
Feature 1. Monolithic inorganic material construction 2. Closed magnetic circuit avoids crosstalk 3. S.M.T. type 4. Suitable for flow and reflow soldering 5. Shapes and dimensions follow E.I.A. SPEC 6.
YAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.
YAGEO CORPORATION SMD INDUCTOR / BEADS CLH Series Multilayer Chip Inductors High Frequency Lead-free / For High Frequency Applications APPLICATIONS RF Resonance and Impedance Matching Circuit RF and Wireless
Feature. 8. High reliability. Application. 1. Series name. 2. Dimension. ( See Details ) 3. Material. D a b a 0.25 ± ± ± 0.
Feature 1. Monolithic inorganic material construction 2. Closed magnetic circuit avoide crosstalk 3. S.M.T. type 4. Suitable for flow and reflow soldering 5. Shapes and dimensions follow E.I.A. SPEC 6.
Chip Ferrite Bead MCB-S/B Series
Chip Ferrite Bead MCB-S/B Series Features Monolithic inorganic material construction Closed magnetic circuit avoids crosstalk SMD Type & suitable for reflow and wave soldering Available in various sizes
SMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008
SMD Wire Wound Ferrite Chip Inductors - LS Series LS Series LS Series is the newest in open type ferrite wire wound chip inductors. The wire wound ferrite construction supports higher SRF, lower DCR and
SMD Shielded Power Inductors SPIA Series. SPIA Series. Product Identification
SPIA Series SPIA series is an automatic assembly constructed power inductor which is shielded with ferrite core. It is ideal for portable device DC-DC converter line. Features RoHS Compliant Miniature
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. PRODUCT DETAIL Electrical Characteristics μh L (Min) Q MHz (Min) SRF Ω DCR IDC ma TEST FREQ: MHz TEST LEVEL: 100 mv Test Instruments HP4291
SCL Series. Multilayer Chip Ferrite Inductor
Multilayer Chip Ferrite Inductor Features 1 Monolithic structure for high reliability 2 Compact size inductor possible 3 No cross coupling due to magnetic shield 4 Perfect shape for mounting with no directionality
INPAQ Global RF/Component Solutions
MCB & MHC W Series Specification Product Name Series Multilayer Chip Ferrite Bead MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516 MCB and MHC Series Chip Ferrite Bead for Automotive Applications
SMD Power Inductor-VLH
SMD Power Inductor-VH Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 321618C 3.2±0.3 1.6±0.2
Configurations: Dimension (mm) 0.60 ±0.03 IMCH ±0.1 IMCH ±0.2 IMCH IMCH ± IMCH ±0.
Multilayer Chip s for High Frequency Configurations: FEATURES To prevent EMI interference noises between. High Q and high reliability and ceramic. Monolithic inorganic material construction. Shapes and
SMD Power Inductor-VLH
SMD Power Inductor-VH PAD AYOUT Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252510 2.5±0.2
Sunlord Specifications subject to change without notice. Please check our website for latest information. Revised 2018/04/15
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Configurations: Dimension (mm) B (max) A (max) 0.20 IWCCG1005. Inductance Range IWCCG ~ IWCCG ~ 1000 IWCCG
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
IWCSeries FEATURES APPLICATION ORDERING CODE TRIGON COMPONENTS. Configurations: Dimension (mm) IWC C G 1608 K 22N T (1) (2) (3) (4) (5) (6) (7)
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. FEATURES The monolithic construction performs high reliability and ensures a closed magnetic flux in a component avoids magnetic and interference
Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
HFC SERIES High Freq. Wound Ceramic Chip Inductors
FEATURES High frequency applications. Low DC resistance and high allowable DC current. Close tolerance application.2% tolerence is available for particular inductance values. Small footprint as well as
Thin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
MCB and MHC Series Chip Ferrite Bead for Automotive Applications Qualified based on AEC-Q200
RoHS MC and MHC Series Chip Ferrite ead for Automotive Applications Qualified based on AEC-Q200 Explanation of Part Number MC 1608 W 12 1 H P - 1 2 3 4 5 6 7 8 9 1. Series Name 2. Size Code: the first
Multilayer Chip Inductor / CL TYPE
Multilayer Chip Inductor / CL TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no lead
Data sheet Thin Film Chip Inductor AL Series
Data sheet Thin Film Chip Inductor AL Series Scope - 0201 and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and
Polymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
Multilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
High Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
B37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 2012 [0805] 2520 [1008] 3216 [1206] 3225 [1210]
![Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 2012 [0805] 2520 [1008] 3216 [1206] 3225 [1210]](/thumbs/86/93358879.jpg "Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 2012 [0805] 2520 [1008] 3216 [1206] 3225 [1210]")
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -4 ~+85 FEATURES Small chip suitable for surface mounting High inductance with ferrite material APPLICATIONS Video cameras, liquid crystal
MULTILAYER CHIP VARISTOR JMV S & E Series: (SMD Surge Protection)
INTRODUCTION Metal Oxide based chip varistors (JMVs) are used for transient suppression. JMVs have non-linear - behavior, which is similar to that of Zener Diode. Each grain in JMV exhibits small p-n junction
FERRITES FERRITES' NOTES RAW MATERIAL SPECIFICATION (RMS)
FERRITES' NOTES RW MTERIL SPEIFITION (RMS) Property Unit Pratical Frequency Range MHz Initial Permeability urie Temperature Specific Gravity g/cm 3 Loss Factor @ FREQUENY -6 MHz Temp. oef. of Initial Permeability
Thin Film Chip Inductor
Scope -Calchip s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Calchip s design provides high, excellent Q, and superior temperature stability. This highly
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 1608 [0603] 2012 [0805]
![Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 1608 [0603] 2012 [0805]](/thumbs/86/93359020.jpg "Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 1608 [0603] 2012 [0805]")
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -4 ~+85 FEATURES Small chip suitable for surface mounting High inductance with ferrite material APPLICATIONS Video cameras, liquid crystal
Multilayer Chip Capacitors C0G/NP0/CH
Multilayer Chip Capacitors C0G/NP0/CH Features Good thermal stability High insulation resistance Low dissipation factor Low inductance Applications Resonant circuits Filter circuits Timing elements Coupling
High Frequency Ceramic Inductors TLNMH0603P Series
(1/5) High Frequency Ceramic Inductors Features High Q inductors for high frequency applications Multilayer Ceramic Optimal configuration for improved Q to 800MHz or higher 0.1nH step inductance values
Wire Wound Chip Ceramic Inductor SDWL-C Series Operating Temp. : -40 ~ N
Wire Wound Chip Ceramic Inductor SDWL-C Series Operating Temp. : -4 ~+25 FEATURES Small chip suitable for surface mounting High value and high self-resonant frequency with ceramic material Tight inductance
C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]
![C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]](/thumbs/90/101883046.jpg "C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]")
Multilayer Chip SDV Series Operating Temp. : -55 ~+125 FEATURES SMD type suitable for high density mounting Excellent clamping ratio and quick response time (
2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
![2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%](/thumbs/78/78109689.jpg "2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%")
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
Sunlord. Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) 2R2 SPH
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES) (8) 95-8365 venkel.com Features: RoHS Compliant and Halogen Free Good Q values High SRF range: 1nH to 47uH Tolerance: ±.2nH, ±.3nH, ±2%, ±5%, ±1% High
HIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
Low Value Multilayer Inductors (LMCI Series)
Structure Features: RoHS Compliant and Halogen Free Closed magnetic circuit configuration avoids crosstalk and is suitable for high density PCBs Size range: 0201, 05, 1608 Perfect shape for automatic mounting
Ceramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Chip Bead;CIB/CIM Series
Chip Bead;CIB/CIM Series For EMI Suppression The CIB/CIM Series are used for EMI suppression filter. These beads suppress electro-magnetic wave noise by increased impedance, especially by increased resistance
Operating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
SMD Power chokes- SPD Series SPD series chokes For High Current Use
SMD Power chokes- SPD Series SPD series chokes For High Current Use Features 1.Shielded construction. 2.High current rating up to DC Amp 3.High frequency range up to 5.MHz 4.Ultra low buzz noise, due to
SMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
PRODUCT IDENTIFICATION SWPA 3012 S 1R0 N T
Wire Wound SMD Power Inductors SWPA Series Operating temperature range: -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded conruction reduces buzz noise to ultra-low levels Metallization
THICK FILM CHIP RESISTOR" CAL-CHIP ELECTRONICS INC."
THICK FILM CHIP RESISTOR CAL-CHIP ELECTRONICS INC. CAL-CHIP SERIES: RM SERIES 1 2 3 INTRODUCTION SCOPE Applies to all sizes of rectangular-type fixed chip resistors with Ruthenium base as material. FEATURES
No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor
PART NUMBERING SYSTEM SI F 0805 K 780 F (1) (2) (3) (4) (5) (6) No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor (2) Type F Ferrite
No Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
Power Inductor LVS Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering LVS 6645 L - 1R M - AU Series Name Dimensions Code Inductance Internal Code (mm) (uh) Tolerance 4412 4.x4.x1.2 L Low DCR R47.47 M ±% 4418 4.x4.x1.8
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
QFLC R0 K - D
Feature. Ferrite core wire wound construction. 2. Provide low DC resistance and high current. 3. Precision inductance tolerance is available. 4. Small footprint as well as profile. 5. All support Lead-Free
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
AL Series - Thin Film Chip Inductor
Features A Photo Lithographic Single Layer Ceramic Chip High SRF, Excellent, Superior Temperature Stability Tight Tolerance of ± % or ±.nh Self Resonant Frequency Controlled within % Stable Inductance
Thick Film Array Chip Resistor
CN Series Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Reduction of assembly costs and
YJM-L Series Chip Varistor
Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
Chilisin Electronics Singapore Pte Ltd
hilisin Electronics ingapore Pte Ltd High urrent hip Beads, PBY eries Feature: Our MD High urrent hips Beads is specially designed to with tand large urrents while providing a means of EMI/RFI attenuation
Sunlord 1R0. Operating FEATURES. low loss. Feature Type MWSA. Nominal Inductance Nominal Value. Example R R0. 1.0μH
Moldedd SMD Power Inductors MWS Series Operating Temp. : -40 ~+125 (Including self-heating) FETURES Metal material for larg ge current and low loss Closed magnetic circuit design reduces leakage flux Halogen
Part Numbering. Chip Ferrite Bead for Automotive. D q. (Part Number)
Chip Ferrite Bead for Automotive ing () BL M 18 AG 2 S Z 1 D q w e r t y u i o qproduct ID Product ID BL Chip Ferrite Beads timpedance Expressed by three figures. The unit is in ohm (Ω) at MHz. The first
Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
WLCW1005 SMD Wire Wound Ceramic Chip Inductors
WCW1005 SMD Wire Wound Ceramic Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WCW1005 Series_V5.0 Mar. 2016 Features 1. Standard chip size bobbin with
FEATURES APPLICATION PRODUCT T IDENTIFICATION PRODUCT T DIMENSION MAG.LAYERS
FEATURES RoHS compliant. Super low resistance, ultra high current rating. High performance (I sat) realized by metal dust core. Frequency Range: up to 1MHz. APPLICATION PDA, notebook, desktop, and server
DC-DC converter circuits for mobile phones, wearbale devices, DVCs, HDDs, etc.
Multilayer Chip Power Inductor MPH Series Operating Temp. : -40 ~+85 FEATURES Higher DC bias current and lower DC resistance due to Trench Technology Low profile and thin thickness Monolithic structure
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
XKT. Metal Oxide Varistor FEATURES
FEATURES Operating Temperature Range: -40 ~+105 Body Diameters Range From 5D to 20D Wide Operating from 18V to 1800V Full compliance with RoSH and REH DIMENSION L:16mm min SIZE D MAX H MAX d+-0.05 E c
LR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Table of contents INDEX
Table of contents INDEX Quick Product Information... 2 Part Number Explanation and Coding Rule... 3 Wire Wound Ceramic Chip Inductors WLCW1005 Series... 4 Wire Wound Ceramic Chip Inductors WLCW1608 Series...
NKT NTC Thermistor. Negative Temperature Coefficient Thermistor FEATURES
FEATURES Large, strong capacity of suppression of inrush current Big material (B value), small residual Small size, Long life, high reliability and fast response APPLICATIONS Switching -supply, switch,
Trimmable Thick Film Chip Resistor
rimmable hick ilm Chip Resistor R Series rimmable hick ilm Chip Resistor Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. eatures
SMD Transient Voltage Suppressors
SMD Transient Suppressors Feature Full range from 0 to 22 series. form 4 to 60V RMS ; 5.5 to 85Vdc High surge current ability Bidirectional clamping, high energy Fast response time
Sunlord 1R0. Operating FEATURES. low loss. Feature Type MWSA. Nominal Inductance Nominal Value. Example R15 1R
Moldedd SMD Power Inductors MWS Series Operating Temp. : -40 ~+125 (Including self-heating) FETURES Metal material for larg ge current and low loss Closed magnetic circuit design reduces leakage flux Halogen
Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Ferrite Chip Beads For Automotive Use
FETURES RUGGED CONSTRUCTION IN STNDRD EI SIZES EC Q-200 QULIFIED EFFECTIVE EM/RFI SUPPRESSION UP TO 1GHz CURRENT RTINGS UP TO 2.2 MPS SHRP ND HIGH IMPEDNCES VILLE OPERTING TEMPERTURE RNGE: -55 C TO +125C
Thin Film Precision Chip Resistor-AR Series
hin Film Precision Chip Resistor-AR Series Construction L D1 3 4 5 6 D2 9 8 7 1 2 1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat
ALUMINUM ELECTROLYTIC CAPACITORS LKG
Lug / Snap-in Terminal Type, For Audio Equipment Disigned for high grade audio equipment, giving priority to high fidelity sound quality. The variation expansion of the. TYPE-: The low profile high tone
SMD - Resistors. Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612 official distributor of 1. Scope Thick Film Chip Resistor-SMDC Series -This specification applies
Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512 official distributor of Thick Film Chip Resistor-SMDC Series 1. Scope -This specification applies to all
Cal-Chip Electronics, Incorporated Multilayer Chip Inductors For High Frequency
Cal-Chip Electronics, Incorporated Multilayer Chip Inductors For High GHF SERIES FEATURES Multilayer inductor made of advanced ceramics with low-resistivity silver used as internal conductors provides
CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
NPIS Shielded Power Inductors
FEATURES SHIELDED POWER INDUCTOR ULTRA LOW PROFILE (1.0 ~ 4.5mm MAX. HEIGHT) SURFACE MOUNTABLE CONSTRUCTION INDUCTANCE VALUES UP TO 220µH TAPED AND REELED FOR AUTOMATIC INSERTION CHARACTERISTICS Case Size
Metal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
VAR Series Zinc Oxide Varistor
FEATURES Round Zinc Oxide, leaded Coating: epoxy resin, flame-retardant material Operating Temperature Range: -40 ~+105 Wide operating voltage Approvals: CQ C, UL, VDE RoHS 201165EU; REACH Compliant High
Thermistor (NTC /PTC)
ISO/TS16949 ISO 9001 ISO14001 2015 Thermistor (NTC /PTC) GNTC (Chip in Glass Thermistor) SMD NTC Thermistor SMD PTC Thermistor Radial type Thermistor Bare Chip Thermistor (Gold & silver Electrode) 9B-51L,
LR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
MAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor