SMD Power Inductor-VLH
|
|
- Γάννη Χατζηιωάννου
- 5 χρόνια πριν
- Προβολές:
Transcript
1 SMD Power Inductor-VH PAD AYOUT Dimensions Unit: mm Type A B C E F H I J ± ± max. 0.4± min ± ± max. 0.4± min ± ± max ref 0.85 ref (C) 3.2± ± ± ± ± (C) 3.2± ± ± ± ± (C) 4.5± ± ± min. 1.0min C 5.7± ± ± min. 1.7min Features -The miniature chip inductors is wound on a special ferrite core. -VH322515/322520/ are high Q value at high frequency and low DC resistance. -VH322520C/453226C/565047C are low DC resistance, high current capacity, and high impedance characteristics. They are excellent for using as a choke coil in DC power supply circuits. Applications -Pagers, Cordless Phone -High Frequency Communication Products -Personal Computers -Disk Drives And Computer Peripherals -DC Power Supply Circuits Characteristics except /252012/252510/322515C -Rated DC Current: The current when the inductance becomes 10% lower than its initial value or the current when the temperature of coil increases T20. The smaller one is defined as Rated DC Current. (Ta=25 C) -Operating temperature range: -40~85 C Inductance and rated current ranges -VH ~10µH 2.80~0.65A -VH ~10µH 3.70~0.90A -VH ~22µH 2.30~0.51A -VH ~100µH 1.00~0.1A -VH ~560µH 0.445~0.04A -VH ~2200µH 0.50~0.03A -VH322515C 0.47~120µH 3.40~0.17A -VH322520C 1.00~560µH 1.00~0.06A -VH453226C 1.00~470µH 1.08~0.09A -VH575047C 0.12~10000µH 6.00~0.05A -Electrical specifications at 25 C Characteristics for /252012/252510/322515C -Rated DC Current(I sat): The current when the inductance becomes 30% typical its initial value (Ta=25 C) -Temperature Rise Current (I rms): The actual current when the temperature of coil becomes T=40 C..(Ta=25 C) -Operating temperature range: -40~105 C Product Identification VH C K Product Type Dimensions (AxBxC) Use Appearance Inductance Inductance : 2.5x2.0x : 2.5x2.0x : 2.5x2.5x : 3.2x2.5x : 3.2x2.5x : 4.5x3.2x : 5.7x5.0x4.7 C: Choke Use : General Use - : Standard S: Shielded 1R1: 1.1µH 470: 47µH 101: 100µH J: ±5% K: ±10% M: ±20% N: ±30% Offer shielded product by customer s requirement. 62 Tel: Fax: sales@viking.com.tw
2 VH Type I rms(a) typical I sat(a) typical R M 1MHz, 0.1V R0 1.0 M 1MHz, 0.1V R5 1.5 M 1MHz, 0.1V R2 2.2 M 1MHz, 0.1V R3 3.3 M 1MHz, 0.1V R7 4.7 M 1MHz, 0.1V R8 6.8 M 1MHz, 0.1V M 1MHz, 0.1V VH Type I rms(a) I sat(a) R M 1MHz, 0.1V R0 1.0 M 1MHz, 0.1V R5 1.5 M 1MHz, 0.1V R2 2.2 M 1MHz, 0.1V R3 3.3 M 1MHz, 0.1V R7 4.7 M 1MHz, 0.1V R6 5.6 M 1MHz, 0.1V R8 6.8 M 1MHz, 0.1V M 1MHz, 0.1V VH Type (Ω). I rms(a) I sat(a) 1R0 1.0 M 1MHz, 0.1V R5 1.5 M 1MHz, 0.1V R2 2.2 M 1MHz, 0.1V R3 3.3 M 1MHz, 0.1V R7 4.7 M 1MHz, 0.1V R6 5.6 M 1MHz, 0.1V R8 6.8 M 1MHz, 0.1V R2 8.2 M 1MHz, 0.1V M 1MHz, 0.1V M 1MHz, 0.1V VH Type 1R0 1.0 N 1MHz, 0.1V R5 1.5 N 1MHz, 0.1V R2 2.2 M 1MHz, 0.1V R3 3.3 M 1MHz, 0.1V R7 4.7 M 1MHz, 0.1V K 1MHz, 0.1V K 1MHz, 0.1V K 1MHz, 0.1V K 1MHz, 0.1V K 1MHz, 0.1V K 1MHz, 0.1V K 1MHz, 0.1V Tel: Fax: sales@viking.com.tw 63
3 VH Type Spec. min. Quality Factor 1R0 1.0 M 1MHz, 0.1V 20 1MHz, 0.1V R2 1.2 M 1MHz, 0.1V 20 1MHz, 0.1V R5 1.5 K, M 1MHz, 0.1V 20 1MHz, 0.1V R8 1.8 K, M 1MHz, 0.1V 20 1MHz, 0.1V R2 2.2 K, M 1MHz, 0.1V 20 1MHz, 0.1V R7 2.7 K, M 1MHz, 0.1V 20 1MHz, 0.1V R3 3.3 K, M 1MHz, 0.1V 20 1MHz, 0.1V R9 3.9 K, M 1MHz, 0.1V 20 1MHz, 0.1V R7 4.7 K, M 1MHz, 0.1V 20 1MHz, 0.1V R6 5.6 K, M 1MHz, 0.1V 20 1MHz, 0.1V R8 6.8 K, M 1MHz, 0.1V 20 1MHz, 0.1V R2 8.2 K, M 1MHz, 0.1V 20 1MHz, 0.1V J, K 1MHz, 0.1V 35 1MHz, 0.1V J, K 1MHz, 0.1V 35 1MHz, 0.1V J, K 1MHz, 0.1V 35 1MHz, 0.1V J, K 1MHz, 0.1V 35 1MHz, 0.1V J, K 1MHz, 0.1V 35 1MHz, 0.1V J, K 1MHz, 0.1V 35 1MHz, 0.1V J, K 1MHz, 0.1V 40 1MHz, 0.1V J, K 1MHz, 0.1V 40 1MHz, 0.1V J, K 1MHz, 0.1V 40 1MHz, 0.1V J, K 1MHz, 0.1V 40 1MHz, 0.1V J, K 1MHz, 0.1V 40 1MHz, 0.1V J, K 1MHz, 0.1V 40 1MHz, 0.1V J, K 1MHz, 0.1V KHz, 0.1V J, K 1MHz, 0.1V KHz, 0.1V J, K 1MHz, 0.1V KHz, 0.1V J, K 1MHz, 0.1V KHz, 0.1V J, K 1MHz, 0.1V KHz, 0.1V J, K 1MHz, 0.1V KHz, 0.1V J, K 1MHz, 0.1V KHz, 0.1V J, K 1MHz, 0.1V KHz, 0.1V J, K 1KHz, 0.1V KHz, 0.1V J, K 1KHz, 0.1V KHz, 0.1V ref 64 Tel: Fax: sales@viking.com.tw
4 VH Type Spec. min. Quality Factor 1R0 1.0 M 1MHz, 0.1V 20 1MHz, 0.1V R2 1.2 M 1MHz, 0.1V 20 1MHz, 0.1V R5 1.5 M 1MHz, 0.1V 20 1MHz, 0.1V R8 1.8 M 1MHz, 0.1V 20 1MHz, 0.1V R2 2.2 M 1MHz, 0.1V 20 1MHz, 0.1V R7 2.7 M 1MHz, 0.1V 20 1MHz, 0.1V R3 3.3 M 1MHz, 0.1V 20 1MHz, 0.1V R9 3.9 M 1MHz, 0.1V 20 1MHz, 0.1V R7 4.7 K, M 1MHz, 0.1V 30 1MHz, 0.1V R6 5.6 K, M 1MHz, 0.1V 30 1MHz, 0.1V R8 6.8 K, M 1MHz, 0.1V 30 1MHz, 0.1V R2 8.2 K, M 1MHz, 0.1V 30 1MHz, 0.1V J, K 1MHz, 0.1V 35 1MHz, 0.1V J, K 1MHz, 0.1V 35 1MHz, 0.1V J, K 1MHz, 0.1V 35 1MHz, 0.1V J, K 1MHz, 0.1V 35 1MHz, 0.1V J, K 1MHz, 0.1V 35 1MHz, 0.1V J, K 1MHz, 0.1V 35 1MHz, 0.1V J, K 1MHz, 0.1V 35 1MHz, 0.1V J, K 1MHz, 0.1V 35 1MHz, 0.1V J, K 1MHz, 0.1V 35 1MHz, 0.1V J, K 1MHz, 0.1V 35 1MHz, 0.1V J, K 1MHz, 0.1V 35 1MHz, 0.1V J, K 1MHz, 0.1V 35 1MHz, 0.1V J, K 1MHz, 0.1V KHz, 0.1V J, K 1MHz, 0.1V KHz, 0.1V J, K 1MHz, 0.1V KHz, 0.1V J, K 1MHz, 0.1V KHz, 0.1V J, K 1MHz, 0.1V KHz, 0.1V J, K 1MHz, 0.1V KHz, 0.1V J, K 1MHz, 0.1V KHz, 0.1V J, K 1MHz, 0.1V KHz, 0.1V J, K 1KHz, 0.1V KHz, 0.1V J, K 1KHz, 0.1V KHz, 0.1V J, K 1KHz, 0.1V KHz, 0.1V J, K 1KHz, 0.1V KHz, 0.1V J, K 1KHz, 0.1V KHz, 0.1V J, K 1KHz, 0.1V KHz, 0.1V J, K 1KHz, 0.1V KHz, 0.1V J, K 1KHz, 0.1V KHz, 0.1V J, K 1KHz, 0.1V KHz, 0.1V Tel: Fax: sales@viking.com.tw 65
5 VH322515C- Type (Ω) ±20% I sat I rms R N 1MHz, 0.1V R0 1.0 N 1MHz, 0.1V R5 1.5 N 1MHz, 0.1V R2 2.2 N 1MHz, 0.1V R3 3.3 N 1MHz, 0.1V R7 4.7 N 1MHz, 0.1V R8 6.8 N 1MHz, 0.1V M 1MHz, 0.1V M 1MHz, 0.1V M 1MHz, 0.1V M 1MHz, 0.1V M 1MHz, 0.1V M 1MHz, 0.1V M 1MHz, 0.1V M 1MHz, 0.1V VH322520C- Type 1R0 1.0 M 1MHz, 0.1V R2 2.2 M 1MHz, 0.1V R3 3.3 M 1MHz, 0.1V R7 4.7 M 1MHz, 0.1V R8 6.8 M 1MHz, 0.1V M 1MHz, 0.1V K, M 1MHz, 0.1V K, M 1MHz, 0.1V J, K 1MHz, 0.1V J, K 1MHz, 0.1V J, K 1MHz, 0.1V J, K 1MHz, 0.1V J, K 1MHz, 0.1V J, K 1MHz, 0.1V J, K 1MHz, 0.1V Tel: Fax: sales@viking.com.tw
6 VH453226C- Type 1R0 1.0 M 1MHz, 0.1V R5 1.5 M 1MHz, 0.1V R2 2.2 M 1MHz, 0.1V R3 3.3 M 1MHz, 0.1V R7 4.7 K, M 1MHz, 0.1V R8 6.8 K, M 1MHz, 0.1V J, K 1MHz, 0.1V J, K 1MHz, 0.1V J, K 1MHz, 0.1V J, K 1MHz, 0.1V J, K 1MHz, 0.1V J, K 1MHz, 0.1V J, K 1MHz, 0.1V J, K 1MHz, 0.1V J, K 1MHz, 0.1V J, K 1MHz, 0.1V J, K 1KHz, 0.1V VH575047C- Type R M 1MHz, 0.1V R M 1MHz, 0.1V R M 1MHz, 0.1V R0 1.0 M 1MHz, 0.1V R5 1.5 M 1MHz, 0.1V R2 2.2 M 1MHz, 0.1V R3 3.3 M 1MHz, 0.1V R7 4.7 M 1MHz, 0.1V R8 6.8 M 1MHz, 0.1V K, M 1MHz, 0.1V K, M 1MHz, 0.1V K, M 1MHz, 0.1V K, M 1MHz, 0.1V K, M 1MHz, 0.1V ref K, M 1MHz, 0.1V K, M 100KHz, 0.1V K, M 100KHz, 0.1V K, M 100KHz, 0.1V K, M 100KHz, 0.1V K, M 100KHz, 0.1V K, M 100KHz, 0.1V K, M 10KHz, 0.1V K, M 10KHz, 0.1V K, M 10KHz, 0.1V K, M 10KHz, 0.1V Tel: Fax: sales@viking.com.tw 67
SMD Power Inductor-VLH
SMD Power Inductor-VH Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 321618C 3.2±0.3 1.6±0.2
Διαβάστε περισσότεραSMD Wire Wound Ferrite Chip Inductors - SQC Series. SQC Series. Product Identification. Shapes and Dimensions
SMD Wire Wound Ferrite Chip Inductors - SQC Series SQC Series These miniature chip inductors, SQC Series, wound on a special ferrite core and are excellent to be used as choke coil in DC power supply circuits.
Διαβάστε περισσότεραAVX SMD Power Inductors
AVX SMD Power Inductors www.avx.com Version 14.7 Table of Contents LMax SMD Non-Shield Power Inductor LMXN Series Non-Shielded Style B 2-3 Inductance Range: 0.47-470 μh Rated Current: 0.53-30 A LMXN Series
Διαβάστε περισσότεραSunlord Specifications subject to change without notice. Please check our website for latest information. Revised 2018/04/15
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Διαβάστε περισσότεραPRODUCT IDENTIFICATION SWPA 3012 S 1R0 N T
Wire Wound SMD Power Inductors SWPA Series Operating temperature range: -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded conruction reduces buzz noise to ultra-low levels Metallization
Διαβάστε περισσότεραSunlord. Wire Wound SMD Power Inductors SWCS Series SWCS XXXX -XXX T. Operating Temperature: -25 ~ +105 FEATURES APPLICATIONS PRODUCT IDENTIFICATION
Wire Wound SMD Power Inductors SWCS Series Operating Temperature: -25 ~ +105 FEATURES Various high power inductors are superior to be high saturation Suitable for surface mounting equipment APPLICATIONS
Διαβάστε περισσότεραDC-DC converter circuits for mobile phones, wearbale devices, DVCs, HDDs, etc.
Multilayer Chip Power Inductor MPH Series Operating Temp. : -40 ~+85 FEATURES Higher DC bias current and lower DC resistance due to Trench Technology Low profile and thin thickness Monolithic structure
Διαβάστε περισσότεραSunlord. Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) 2R2 SPH
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Διαβάστε περισσότερα2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Διαβάστε περισσότεραYAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.
YAGEO CORPORATION SMD INDUCTOR / BEADS CLH Series Multilayer Chip Inductors High Frequency Lead-free / For High Frequency Applications APPLICATIONS RF Resonance and Impedance Matching Circuit RF and Wireless
Διαβάστε περισσότεραSMD Shielded Power Inductors SPIA Series. SPIA Series. Product Identification
SPIA Series SPIA series is an automatic assembly constructed power inductor which is shielded with ferrite core. It is ideal for portable device DC-DC converter line. Features RoHS Compliant Miniature
Διαβάστε περισσότεραWire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 2012 [0805] 2520 [1008] 3216 [1206] 3225 [1210]
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -4 ~+85 FEATURES Small chip suitable for surface mounting High inductance with ferrite material APPLICATIONS Video cameras, liquid crystal
Διαβάστε περισσότεραData sheet Thin Film Chip Inductor AL Series
Data sheet Thin Film Chip Inductor AL Series Scope - 0201 and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and
Διαβάστε περισσότεραIWCSeries FEATURES APPLICATION ORDERING CODE TRIGON COMPONENTS. Configurations: Dimension (mm) IWC C G 1608 K 22N T (1) (2) (3) (4) (5) (6) (7)
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Διαβάστε περισσότεραWire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 1608 [0603] 2012 [0805]
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -4 ~+85 FEATURES Small chip suitable for surface mounting High inductance with ferrite material APPLICATIONS Video cameras, liquid crystal
Διαβάστε περισσότεραSLD Series. SMD Type Shielded Power Inductors. Features. Applications. Lead Free Part Numbering. Dimensions
SMD Type Shielded Power Inductors Features 1. Magnetically shielded Version. 2. High inductance /High Power Inductor. 3. The products contain no lead and also support lead-free soldering. Pb Applications
Διαβάστε περισσότεραSMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008
SMD Wire Wound Ferrite Chip Inductors - LS Series LS Series LS Series is the newest in open type ferrite wire wound chip inductors. The wire wound ferrite construction supports higher SRF, lower DCR and
Διαβάστε περισσότεραSMD Shielded Power Inductor HPCRHF2D /3D /4D Series
SMD Shielded Power Inductor HPCRHF2D /3D /4D Series Features: l SMD type power inductors by the electrode is attached to the ferrite core directly. l Magnetically shielded to prevent noise radiation. Applications:
Διαβάστε περισσότεραMultilayer Chip Inductor / CL TYPE
Multilayer Chip Inductor / CL TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no lead
Διαβάστε περισσότεραWIRE WOUND CHIP INDUCTORS
FEATURES High Self-Resonance Frequency Stable inductance at high frequency Tight inductance tolerance High Q factory High current Low DCR APPLICATIONS Antenna amplifiers Mobile phone Key entry GPS (Global
Διαβάστε περισσότεραConfigurations: Dimension (mm) B (max) A (max) 0.20 IWCCG1005. Inductance Range IWCCG ~ IWCCG ~ 1000 IWCCG
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Διαβάστε περισσότεραQFLC R0 K - D
Feature. Ferrite core wire wound construction. 2. Provide low DC resistance and high current. 3. Precision inductance tolerance is available. 4. Small footprint as well as profile. 5. All support Lead-Free
Διαβάστε περισσότεραSMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)
Marking Outline: Low DCR, high rated current. Magnetic shielded structure Lead free product, RoHS compliant. RoHS Carrier tape packing, suitable for SMT process. SMT Widely used in buck converter, laptop,
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
Διαβάστε περισσότεραINDEX HOESUNG COIL PARTS
1. Metal Molding High Current SMD Power Inductor PART NO DEMINSION(mm) Inductance Range Rated DC Current Page MMI 06518 SERIES 6.5 7.1 1.8 1.0uH ~ 4.7uH 9.8A ~ 5.0A 5 MMI 06524 SERIES 6.5 7.1 2.4 0.47uH
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Calchip s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Calchip s design provides high, excellent Q, and superior temperature stability. This highly
Διαβάστε περισσότεραLow Value Multilayer Inductors (LMCI Series)
Structure Features: RoHS Compliant and Halogen Free Closed magnetic circuit configuration avoids crosstalk and is suitable for high density PCBs Size range: 0201, 05, 1608 Perfect shape for automatic mounting
Διαβάστε περισσότεραTODA-ISU Corporation. SMD Power Inductor. SPI series. SMD Team
SMD Power Inductor SPI series TODA-ISU Corporation Advantages & Applications Advantages Low profile High current capability & Low DCR Low temperature rise Increased thermal efficiency Patent (Coil Integrated
Διαβάστε περισσότεραHigh Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
Διαβάστε περισσότεραDC-DC converter circuits for mobile phones, wearable devices, DVCs, HDDs, etc. MPH S R47 M T B01
Multilayer Chip Power Inductor MPH Series Operating emp. : -55 ~+25 FEAURES Higher DC bias current and lower DC resistance due to trench technology ow profile and thin thickness Monolithic structure for
Διαβάστε περισσότεραMultilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Διαβάστε περισσότεραUnshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
Διαβάστε περισσότεραC121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]
Multilayer Chip SDV Series Operating Temp. : -55 ~+125 FEATURES SMD type suitable for high density mounting Excellent clamping ratio and quick response time (
Διαβάστε περισσότεραSERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES) (8) 95-8365 venkel.com Features: RoHS Compliant and Halogen Free Good Q values High SRF range: 1nH to 47uH Tolerance: ±.2nH, ±.3nH, ±2%, ±5%, ±1% High
Διαβάστε περισσότεραXIX INDUCTORS XXX XXX XXX. Shielded SMD Power Inductor ORDER INFORMATION FIG1: FIG2: FIG3: Dimensions( unit: mm)
Features *High power, High saturation inductors *With magnetically shielded against radiation *Directly connected electrode on ferrite core *Highly accurate dimensions for surface mounting Applications
Διαβάστε περισσότεραHFC SERIES High Freq. Wound Ceramic Chip Inductors
FEATURES High frequency applications. Low DC resistance and high allowable DC current. Close tolerance application.2% tolerence is available for particular inductance values. Small footprint as well as
Διαβάστε περισσότεραAL Series - Thin Film Chip Inductor
Features A Photo Lithographic Single Layer Ceramic Chip High SRF, Excellent, Superior Temperature Stability Tight Tolerance of ± % or ±.nh Self Resonant Frequency Controlled within % Stable Inductance
Διαβάστε περισσότεραCal-Chip Electronics, Incorporated Multilayer Chip Inductors For High Frequency
Cal-Chip Electronics, Incorporated Multilayer Chip Inductors For High GHF SERIES FEATURES Multilayer inductor made of advanced ceramics with low-resistivity silver used as internal conductors provides
Διαβάστε περισσότεραPolymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
Διαβάστε περισσότεραCSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Διαβάστε περισσότεραHIGH CURRENT POWER INDUCTORS / AMPI ED Type Series
ARLITECH ELECTRONIC CORP. TEL:886-2-2999-8313 FAX:886-2-2995-7520 E-mail:sales@arlitech.com.tw HIGH CURRENT POWER INDUCTORS / AMPI ED Type Series Features High performance realized by metal core Compact
Διαβάστε περισσότεραPower Inductor 125 CDRH Series
CDRH Series Features Magnetically shielded construction Storage temperature range: - ~+ Operating temperature range: - ~+ (including coil s self-heat) RoHS Compliance and Halogen Free Qualification to
Διαβάστε περισσότεραSmaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
Διαβάστε περισσότεραHigh Current Chip Ferrite Bead MHC Series
High Current Chip Ferrite Bead MHC Series Features Combination of high frequency noise suppression with capability of handing high current. The current rating up to 6 Amps with low DC. Applications High
Διαβάστε περισσότεραCurrent Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Διαβάστε περισσότεραAluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Διαβάστε περισσότεραSMD Multilayer Ferrite Chip Beads. Multilayer Ferrite Chip Beads. Product Identification. Dimension Conversion
SMD Multilayer Ferrite Chip Beads Multilayer Ferrite Chip Beads Chilisin offers a wide range of multi-layered ferrite chip beads with various sizes, frequency characteristics, and impedance values for
Διαβάστε περισσότεραSuitable for DC-DC Converters, Voltage Regulators, Decoupling Applications for Computer Motherboards, etc. Performance Characteristics
+105 C, Higher Ripple, Lower than ULG Features Higher Ripple, Lower than ULG Wide Temperature Range RoHS Compliant Applications Suitable for DC-DC Converters, Voltage Regulators, Decoupling Applications
Διαβάστε περισσότεραSMD Power chokes- SPD Series SPD series chokes For High Current Use
SMD Power chokes- SPD Series SPD series chokes For High Current Use Features 1.Shielded construction. 2.High current rating up to DC Amp 3.High frequency range up to 5.MHz 4.Ultra low buzz noise, due to
Διαβάστε περισσότεραAluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
Διαβάστε περισσότεραHIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
Διαβάστε περισσότεραMULTILAYER CHIP VARISTOR JMV S & E Series: (SMD Surge Protection)
INTRODUCTION Metal Oxide based chip varistors (JMVs) are used for transient suppression. JMVs have non-linear - behavior, which is similar to that of Zener Diode. Each grain in JMV exhibits small p-n junction
Διαβάστε περισσότεραMAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
Διαβάστε περισσότεραFeature. 8. High reliability. Application. 1. Series name. 2. Dimension. ( See Details ) 3. Material ± ± ± ± 0.
Feature 1. Monolithic inorganic material construction 2. Closed magnetic circuit avoids crosstalk 3. S.M.T. type 4. Suitable for flow and reflow soldering 5. Shapes and dimensions follow E.I.A. SPEC 6.
Διαβάστε περισσότεραFEATURES APPLICATION PRODUCT T IDENTIFICATION PRODUCT T DIMENSION MAG.LAYERS
FEATURES RoHS compliant. Super low resistance, ultra high current rating. High performance (I sat) realized by metal dust core. Frequency Range: up to 1MHz. APPLICATION PDA, notebook, desktop, and server
Διαβάστε περισσότεραSCL Series. Multilayer Chip Ferrite Inductor
Multilayer Chip Ferrite Inductor Features 1 Monolithic structure for high reliability 2 Compact size inductor possible 3 No cross coupling due to magnetic shield 4 Perfect shape for mounting with no directionality
Διαβάστε περισσότεραRoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. PRODUCT DETAIL Electrical Characteristics μh L (Min) Q MHz (Min) SRF Ω DCR IDC ma TEST FREQ: MHz TEST LEVEL: 100 mv Test Instruments HP4291
Διαβάστε περισσότεραSPM R2 M P S A
Wire Wound s (SPM/SAM/SPS/SPH/SPN Series) Ordering Code Product Code: SPM: Molding Inductor-General SAM: Molding Inductor-Automotive SPM 2520 2R2 M P S A SPS : Metal Coating (Ultra high Current) SPN :
Διαβάστε περισσότερα+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
Διαβάστε περισσότεραB37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Διαβάστε περισσότεραInductor. TCRC Radial Series Choke Inductor - / 扼流线圈电感器 of 07
TCRC Radial Series Choke Inductor - / 扼流线圈电感器 Features Open Magnetic circuit construction. Low cost and high reliability. Applications Notebook, Notebook, Inkjet printer, Copying machine, Display monitor,
Διαβάστε περισσότεραNPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
Διαβάστε περισσότεραMINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. Characteristics. Leakage Current(MAX) I=Leakage Current(µA) C=Nominal Capacitance(µF) V=Rated Voltage(V)
SERIES 5 C Long Life. Low impedance. (Rated Voltage 6.3~V.DC) FEATURES Load Life : 5 C 4~hours. Low impedance at khz with selected materials. SPECIFICATIONS Items Operating Temperature Range Rated Voltage
Διαβάστε περισσότεραNo item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor
PART NUMBERING SYSTEM SI F 0805 K 780 F (1) (2) (3) (4) (5) (6) No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor (2) Type F Ferrite
Διαβάστε περισσότεραNPIS Shielded Power Inductors
FEATURES SHIELDED POWER INDUCTOR ULTRA LOW PROFILE (1.0 ~ 4.5mm MAX. HEIGHT) SURFACE MOUNTABLE CONSTRUCTION INDUCTANCE VALUES UP TO 220µH TAPED AND REELED FOR AUTOMATIC INSERTION CHARACTERISTICS Case Size
Διαβάστε περισσότεραFeature. 8. High reliability. Application. 1. Series name. 2. Dimension. ( See Details ) 3. Material. D a b a 0.25 ± ± ± 0.
Feature 1. Monolithic inorganic material construction 2. Closed magnetic circuit avoide crosstalk 3. S.M.T. type 4. Suitable for flow and reflow soldering 5. Shapes and dimensions follow E.I.A. SPEC 6.
Διαβάστε περισσότεραChip Ferrite Bead MCB-S/B Series
Chip Ferrite Bead MCB-S/B Series Features Monolithic inorganic material construction Closed magnetic circuit avoids crosstalk SMD Type & suitable for reflow and wave soldering Available in various sizes
Διαβάστε περισσότεραSMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
Διαβάστε περισσότεραRJJ Miniature Aluminum Electrolytic Capacitors RJJ. Series RJJ High-Frequency, Low Impedance, Standard Type. Radial Type
352 Elna Corrections 80-95 /6/98 :55 AM Page Miniature Aluminum Electrolytic Capacitors Series High-Frequency, Low Impedance, Standard Type For high reliability applications, Environmentally safe. High-frequency,
Διαβάστε περισσότεραThin Film Precision Chip Resistor-AR Series
hin Film Precision Chip Resistor-AR Series Construction L D1 3 4 5 6 D2 9 8 7 1 2 1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat
Διαβάστε περισσότεραSOFT FERRITE CORE FOR EMI/EMC SUPPRESSION. AVERTEC Co., Ltd.
- 0 - SOFT FERRITE ORE FOR EMI/EM SUPPRESSION RM423, Ilsan Techno Town, 38, Ilsan-ro, Ilsandong-gu, Goyang-si, Gyeonggi-do, 40-722, Korea Tel. (070)4632-5555~6 Fax. (070)4032-5555 http://www.avertec.kr
Διαβάστε περισσότεραPb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. FEATURES The monolithic construction performs high reliability and ensures a closed magnetic flux in a component avoids magnetic and interference
Διαβάστε περισσότερα+85 C Screw Terminal Aluminum Electrolytic Capacitors. For filtering applications. Capacitance change Dissipation factor Leakage current
For filtering applications FEATURES High ripple current High reiability range: 270µF to 680,000µF Voltage range: 6.3 to 450 SPECIFICATIONS Tolerance ±20% at 120 Hz, 25 C Operating Temperature Range Dissipation
Διαβάστε περισσότεραSMD Wire Wound Chip Inductor
Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors -ow profile, high current are available
Διαβάστε περισσότερα± 20% ± 5% ± 10% RENCO ELECTRONICS, INC.
RL15 RL16, RL17, RL18 MINIINDUCTORS CONFORMALLY COATED MARKING The nominal inductance is marked by a color code as listed in the table below. Color Black Brown Red Orange Yellow Green Blue Purple Grey
Διαβάστε περισσότεραSCDS Series. SMD Power Inductors APPLICATIONS FEATURES PRODUCT IDENTIFICATION. SHAPES AND DIMENSIONS Unit: mm SCDS - XXX
Yageo corporation INUTORS / S SS Series SM Power Inductors PPLITIONS Power Supply for VTRs, O quipment, L Televisions, Notebook Ps, Portable ommunication quipment - onverters, etc. FTURS vailable in magnetically
Διαβάστε περισσότεραWire Wound Chip Ceramic Inductor SDWL-C Series Operating Temp. : -40 ~ N
Wire Wound Chip Ceramic Inductor SDWL-C Series Operating Temp. : -4 ~+25 FEATURES Small chip suitable for surface mounting High value and high self-resonant frequency with ceramic material Tight inductance
Διαβάστε περισσότεραWIRE-WOUND CHIP INDUCTOR FERRITE/OPENTYPE
WIRE-WOUND CHIP INDUCTOR FERRITE/OPENTYPE 0805CS (2012) Ferrite Series (0.12~33µH) Part Number Inductance µh Percent Tolerance Q Min SRF Min MHz RDC Max Ohms IDC Max ma Color Code 0805CS-121E_FS 0.12@
Διαβάστε περισσότεραRF series Ultra High Q & Low ESR capacitor series
RF series Ultra High Q & Low ESR capacitor series FAITHFUL LINK Features Application» High Q and low ESR performance at high frequency» Telecommunication products & equipments:» Ultra low capacitance to
Διαβάστε περισσότεραSMD Multilayer Ferrite Chip Beads. Multilayer Ferrite Chip Beads. Product Identification. Dimension Conversion
SMD Multilayer Ferrite Chip Beads Multilayer Ferrite Chip Beads Chilisin offers a wide range of multi-layered ferrite chip beads with various sizes, frequency characteristics, and impedance values for
Διαβάστε περισσότεραSMD Multilayer Ferrite Chip Beads. Multilayer Ferrite Chip Beads. Product Identification. Dimension Conversion
SMD Multilayer Ferrite Chip Beads Multilayer Ferrite Chip Beads Chilisin offers a wide range of multi-layered ferrite chip beads with various sizes, frequency characteristics, and impedance values for
Διαβάστε περισσότεραCeramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Διαβάστε περισσότερα4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
Διαβάστε περισσότεραNo Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
Διαβάστε περισσότεραHigh Frequency Ceramic Inductors TLNMH0603P Series
(1/5) High Frequency Ceramic Inductors Features High Q inductors for high frequency applications Multilayer Ceramic Optimal configuration for improved Q to 800MHz or higher 0.1nH step inductance values
Διαβάστε περισσότεραTable of contents INDEX
Table of contents INDEX Quick Product Information... 2 Part Number Explanation and Coding Rule... 3 Wire Wound Ceramic Chip Inductors WLCW1005 Series... 4 Wire Wound Ceramic Chip Inductors WLCW1608 Series...
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Διαβάστε περισσότερα+85 C General Purpose Radial Lead Aluminum Electrolytic Capacitors
+85 C General Purpose Radial Lead Aluminum Electrolytic acitors Applications Filtering Coupling Bypass Features Standard case sizes RoHS compliant Multiple case sizes Lead free Operating Temperature Range
Διαβάστε περισσότεραSB/NB/HF/GB/PB/UPB. SMD Chip Beads OUTLINE PRODUCT IDENTIFICATION SHAPES AND DIMENSIONS
Yageo corporation INDUCTORS / BEADS SMD Chip Beads SB/NB/HF/GB/PB/UPB OUTLINE Yageo offers hundreds of multi-layered ferrite chip beads with various sizes, frequency characteristics, and a wide range of
Διαβάστε περισσότεραUnshielded Power Inductors
Unshielded Power Inductors /080/0804/0810/106/106 Series Inductance with current and temperature: Inductance is measured with P-484 LR Meter or equivalent. Inductance drops 10% typical at Isat level with
Διαβάστε περισσότεραSMD Wire Wound Chip Inductor
Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors -ow profile, high current are available
Διαβάστε περισσότεραMetal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Διαβάστε περισσότερα1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Διαβάστε περισσότεραData sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Διαβάστε περισσότεραFerrite Chip Bead(Lead Free)
Ferrite Chip Bead(Lead Free) YCM-Series 1.Features 1. Monolithic inorganic material construction. 2. Closed magnetic circuit avoids crosstalk. 3. S.M.T. type. 4. Suitable for reflow soldering. 5. Shapes
Διαβάστε περισσότεραCurrent Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
Διαβάστε περισσότεραFeature. shock and pressure. -Tighter tolerance down to ±2% -Smaller size of 0402 (1005) -CATV Filter, Tuner. -Cable Modem/ XDSL Tuner.
Wire Wound Chip Inductor-WL Series Feature -Wire wound ceramic construction provide high SRF -Ultra-compact inductors provide exceptional Q values -Low profile, high current are available -Miniature SMD
Διαβάστε περισσότεραSurface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Διαβάστε περισσότερα