Σχέδια ευρωπαϊκών τυποποιητικών εγγράφων σε Δημόσια Κρίση Κωδικός σχεδίου Τίτλος σχεδίου (Αγγλικά) Ημ. ψήφισης Ημ. Τομεακή Επιτροπή: - EN ISO 17100:2015/prA1 Translation services - Requirements for translation services - Amendment 1 (ISO 17100:2015/DAmd 1:2016) 5/12/2016 pren ISO 16147 Small craft - Inboard diesel engines - Engine-mounted fuel, oil and electrical components (ISO/DIS 16147:2016) 9/12/2016 pren ISO 15378 Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) (ISO/DIS 15378:2016) 27/12/2016 pren ISO 11132 Sensory analysis - Methodology - Guidelines for monitoring the performance of a quantitative sensory panel (ISO 11132:2012) pren ISO 11136 Sensory analysis - Methodology - General guidance for conducting hedonic tests with consumers in a controlled area (ISO 11136:2014) pren ISO/IEC 27000 Information technology - Security techniques - Information security management systems - Overview and vocabulary (ISO/IEC 27000:2016) pren ISO/IEC 27001 Information technology - Security techniques - Information security management systems - Requirements (ISO/IEC 27001:2013) pren ISO/IEC 27002 Information technology - Security techniques - Code of practice for information security controls (ISO/IEC 27002:2013) Τομεακή Επιτροπή: 1 - Μετρήσεις, Δοκιμές, Όργανα και Υλικά pren ISO 20170 Geometrical product specifications (GPS) - Decomposition of geometrical characteristics for manufacturing control (ISO/DIS 20170:2016) 27/12/2016 Τρίτη, 25 Οκτωβρίου 2016 Page 1 of 8
Τομεακή Επιτροπή: 2 - Μηχανική Περιβάλλοντος και Ασφάλεια pren 15004-1 Fixed firefighting systems - Gas extinguishing systems - Part 1: Design, installation and maintenance (ISO 14520-1:2015, modified) pren 15004-9 Fixed firefighting system - Gas extinguishing systems - Part 9: Physical properties and system design of gas extinguishing systems for IG-55 extinguishant (ISO 14520-14:2015, modified) pren 15004-8 Fixed firefighting systems - Gas extinguishing systems - Part 8: Physical properties and system design of gas extinguishing systems for IG-100 extinguishant (ISO 14520-13:2015, modified) pren 15004-7 Fixed firefighting systems - Gas extinguishing systems - Part 7: Physical properties and system design of gas extinguishing systems for IG-01 extinguishant (ISO 14520-12:2015, modified) pren 15004-10 Fixed firefighting systems - Gas extinguishing systems - Part 10: Physical properties and system design of gas extinguishing systems for IG-541 (ISO 14520-15:2015, modified) pren 15004-1 Fixed firefighting systems - Gas extinguishing systems - Part 1: Design, installation and maintenance (ISO 14520-1:2015, modified) pren ISO 9241-392 Ergonomics of human-system interaction - Part 392: Ergonomic recommendations for the reduction of visual fatigue from stereoscopic images (ISO 9241-392:2015) 28/10/2016 Τομεακή Επιτροπή: 3 - Ενεργειακή Τεχνολογία pren 15399 Gas infrastructure - Safety Management Systems for gas networks with maximum operating pressure up to and including 16 bar Τομεακή Επιτροπή: 4 - Ηλεκτροτεχνολογία EN 61770:2009/prAA:2016 Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets Τομεακή Επιτροπή: 6 - Τεχνολογία ΗΥ & Ελέγχου pren 50239:2016 Railway applications - Radio remote control system of traction vehicle for shunting traffic 4/11/2016 pren ISO 14823 Intelligent transport systems - Graphic data dictionary (ISO/DIS 14823:2016) 20/12/2016 pren ISO 14823 Intelligent transport systems - Graphic data dictionary (ISO/DIS 14823:2016) 20/12/2016 pren ISO/IEC 27002 Information technology - Security techniques - Code of practice for information security controls (ISO/IEC 27002:2013) pren ISO/IEC 27001 Information technology - Security techniques - Information security management systems - Requirements (ISO/IEC 27001:2013) pren ISO/IEC 27000 Information technology - Security techniques - Information security management systems - Overview and vocabulary (ISO/IEC 27000:2016) Τρίτη, 25 Οκτωβρίου 2016 Page 2 of 8
Τομεακή Επιτροπή: 7 - Μηχανολογία pren ISO 28921-2 Industrial valves - Isolating valves for low-temperature applications - Part 2: Type testing (ISO 28921-2:2015) 28/10/2016 pren ISO 28921-1 Industrial valves - Isolating valves for low-temperature applications - Part 1: Design, manufacturing and production testing (ISO 28921-1:2013) 28/10/2016 pren 12102-2 Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors - Determination of the sound power level - Part 2: Heat pump water heaters Τομεακή Επιτροπή: 8 - Μηχανική παραγωγής pren ISO 15012-3 Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 3: Determination of the capture efficiency of on-torch welding fume extraction devices (ISO/DIS 15012-3:2016) pren ISO 19085-8 Woodworking machines - Safety - Part 8: Wide-belt calibrating and sanding machines (ISO/DIS 19085-8:2016) pren 12807 LPG equipment and accessories - Transportable refillable brazed steel cylinders for liquefied petroleum gas (LPG) - Design and construction pren 12733 Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety pren ISO 22825 Non-destructive testing of welds - Ultrasonic testing - Testing of welds in austenitic steels and nickel-based alloys (ISO/DIS 22825:2016) 6/12/2016 pren 12285-3 Workshop fabricated steel tanks - Part 3: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids for heating and cooling of buildings EN 13445-3:2014/prA6 Unfired pressure vessels - Part 3 : Design pren 12285-1 Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids other than for heating and cooling of buildings pren ISO 14731 Welding coordination - Tasks and responsibilities (ISO/DIS 14731:2016) 27/12/2016 pren ISO 13918 Welding - Studs and ceramic ferrules for arc stud welding (ISO/DIS 13918:2016) 4/1/2017 pren 15969-1 Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 1: Protocol specification - Control, measurement and event data pren 15969-2 Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 2: Commercial and logistic data Τρίτη, 25 Οκτωβρίου 2016 Page 3 of 8
Τομεακή Επιτροπή: 9 - Μηχανική μεταφορών pren 17023 Railway applications - Rolling stock maintenance - Creation and modification of maintenance plan pren 13848-1 Railway applications - Track - Track geometry quality - Part 1: Characterisation of track geometry pren 13231-5 Railway applications - Track - Acceptance of works - Part 5: Procedures for rail reprofiling in plain line, switches, crossings and expansion devices pren 15654-2 Railway applications - Measurement of vertical forces on wheels and wheelsets - Part 2: Test in workshop for new, modified and maintained vehicles pren 14067-6 Railway applications - Aerodynamics - Part 6: Requirements and test procedures for cross wind assessment 9/2/2017 Τρίτη, 25 Οκτωβρίου 2016 Page 4 of 8
Τομεακή Επιτροπή: 10 - Κατασκευές pren 12440 Natural stone - Denomination criteria pren 12670 Natural stone - Terminology pren 12407 Natural stone test methods - Petrographic examination pren ISO 4064-1 Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2014) 4/11/2016 pren ISO 4064-2 Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014) 4/11/2016 pren ISO 4064-5 Water meters for cold potable water and hot water - Part 5: Installation requirements (ISO 4064-5:2014) 4/11/2016 pren ISO 13438 Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation (ISO/DIS 13438:2016) 6/12/2016 pren 16002 Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing pren 13032-2 Light and lighting - Measurement and presentation of photometric data of lamps and luminaires - Part 2: Presentation of data for indoor and outdoor work places 15/12/2016 pren ISO 17892-7 Geotechnical investigation and testing - Laboratory testing of soil - Part 7: Unconfined compression test (ISO/DIS 17892-7:2016) pren ISO 17892-8 Geotechnical investigation and testing - Laboratory testing of soil - Part 8: Unconsolidated undrained triaxial test (ISO/DIS 17892-8:2016) pren ISO 17892-9 Geotechnical investigation and testing - Laboratory testing of soil - Part 9: Consolidated triaxial compression tests on water saturated soils (ISO/DIS 17892-9:2016) EN ISO 10318-2:2015/prA1 Geosynthetics - Part 2: Symbols and pictograms (ISO 10318-2:2015/DAM 1:2016) EN ISO 10318-1:2015/prA1 Geosynthetics - Part 1: Terms and definitions - Amendment 1 (ISO 10318-1:2015/DAmd 1:2016) pren 13476-2 polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth pren ISO 22477-5 Geotechnical investigation and testing - Testing of geotechnical structures - Part 5: Testing of grouted anchors (ISO/DIS 22477-5:2016) pren 13476-1 polypropylene (PP) and polyethylene (PE) - Part 1:General requirements and performance characteristi pren 13476-1 polypropylene (PP) and polyethylene (PE) - Part 1:General requirements and performance characteristi Τρίτη, 25 Οκτωβρίου 2016 Page 5 of 8
pren 13476-2 polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth pren 13476-3 polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth pren 13476-3 polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth pren 17048 Flexible sheets for waterproofing - Plastic and rubber sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics pren 13880-10 Hot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression pren 13880-8 Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion pren 13880-13 Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test) pren ISO 13426-1 Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 1: Geocells 4/1/2017 pren ISO 16484-5 Building automation and control systems (BACS) - Part 5: Data communication protocol (ISO/DIS 16484-5:2016) Τομεακή Επιτροπή: 11 - Μεταλλουργία pren ISO 945-1 Microstructure of cast irons - Part 1: Graphite classification by visual analysis (ISO/DIS 945-1:2016) pren ISO 8434-1 Metallic tube connections for fluid power and general use - Part 1: 24Β cone connectors (ISO/DIS 8434-1:2016) 2/12/2016 EN ISO 3183:2012/prA1 Petroleum and natural gas industries - Steel pipe for pipeline transportation systems (ISO 3183:2012/DAM 1:2016) 23/12/2016 Τρίτη, 25 Οκτωβρίου 2016 Page 6 of 8
Τομεακή Επιτροπή: 12 - Χημική τεχνολογία, Ξύλο, χαρτί, ίνες, υφάσματα pren ISO 877-2 Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass (ISO/DIS 877-2:2016) pren ISO 877-3 Plastics - Methods of exposure to solar radiation - Part 3: Intensified weathering using concentrated solar radiation (ISO/DIS 877-3:2016) pren ISO 877-1 Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO/DIS 877-1:2016) pren 13588 Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test pren ISO 2819 Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion (ISO/DIS 2819:2016) 9/12/2016 pren ISO 22007-4 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO/DIS 22007-4:2016) 16/12/2016 pren 16785-2 Bio-based products - Bio-based content - Part 2: Determination of the bio-based content using the material balance method pren 16785-2 Bio-based products - Bio-based content - Part 2: Determination of the bio-based content using the material balance method pren ISO 5165 Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO/DIS 5165:2016) 27/12/2016 pren ISO 8401 Metallic coatings - Review of methods of measurement of ductility (ISO/FDIS 8401:2016) pren ISO 9405 Textile floor coverings - Assessment of changes in appearance (ISO 9405:2015) Τομεακή Επιτροπή: 13 - Καταναλωτικά αγαθά και υπηρεσίες pren 1651 Paragliding equipment - Harnesses - Safety requirements and strength tests pren 1888-2 Child care articles - Wheeled child conveyances - Part 2: Pushchairs for heavier children pren 1116 Furniture - Kitchen furniture - Coordinating sizes for kitchen furniture and kitchen appliances pren 14974 Skateparks - Safety requirements and test methods 12/1/2017 Τρίτη, 25 Οκτωβρίου 2016 Page 7 of 8
Τομεακή Επιτροπή: 14 - Επιστήμες Υγείας pren ISO 11737-1 Sterilization of health care products - Microbiological methods - Part 1: Determination of a population of microorganisms on product (ISO/DIS 11737-1:2016) pren ISO 80601-2-55 Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors (ISO/DIS 80601-2-55:2016) 23/12/2016 pren ISO 8596 Ophthalmic optics - Visual acuity testing - Standard and clinical optotypes and their presentation (ISO/DIS 8596:2016) Τομεακή Επιτροπή: 15 - Τεχνολογία Τροφίμων, Καπνού, Αγροτικές και Ιχθυο-καλλιέργειες pren ISO 34101-2 Sustainable and traceable cocoa beans - Part 2: Requirements for performance (related to economic, social, and environmental aspects) (ISO/DIS 34101-2:2016) pren ISO 34101-1 Sustainable and traceable cocoa beans - Part 1: Requirements for sustainability management systems (ISO/DIS 34101-1:2016) pren ISO 34101-3 Sustainable and traceable cocoa beans - Part 3: Requirements for traceability (ISO/DIS 34101-3:2016) EN ISO 11133:2014/prA1 Microbiology of food, animal feed and water - Preparation, production, storage and performance testing of culture media - Amendment 1 (ISO 11133:2014/DAmd 1:2016) 5/12/2016 5/12/2016 5/12/2016 14/12/2016 pren ISO 8534 Animal and vegetable fats and oils - Determination of water content - Karl Fischer method (pyridine free) (ISO/FDIS 8534:2016) pren ISO 663 Animal and vegetable fats and oils - Determination of insoluble impurities content (ISO/FDIS 663:2016) pren ISO 3960 Animal and vegetable fats and oils - Determination of peroxide value - Iodometric (visual) endpoint determination (ISO/FDIS 3960:2016) pren ISO 6883 Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air) (ISO/FDIS 6883:2016) Τομεακή Επιτροπή: 17 - Ηλεκτρικά συστήματα ισχύος - μετατροπείς / μετασχηματιστές, θέματα ασφαλείας και περιβαλλοντικά. pren 50131-2-2 Alarm systems - Intrusion and hold-up systems - Part 2-2: Intrusion detectors - Passive infrared detectors 16/12/2016 Τρίτη, 25 Οκτωβρίου 2016 Page 8 of 8