50 Hz n= 1450 rpm. Standardised EN 733 centrifugal pumps. PERFORMANCE RANGE Flow rate up to 3000 l/min (180 m³/h) Head up to 24 m INSTALLATION AND USE
|
|
|
- Φιλομήλα Καψής
- 5 χρόνια πριν
- Προβολές:
Transcript
1 F Standardised EN centrifugal pumps Hz n= rpm Clean water Industrial use PERFORMNCE RNGE Flow rate up to l/min ( ) Head up to m PPLICTION LIMITS Manometric suction lift up to m Liquid temperature between - C and + C mbient temperature between - C and + C Max. pressure in pump body bar (PN) Continuous service S CONSTRUCTION ND SFETY STNDRDS EN - EN - IEC - IEC - CEI - CEI - Pump body dimensions in compliance with EN EU REGULTION N. / INSTLLTION ND USE Water supply Pressure boosting Irrigation Water circulation in airconditioning units Cleaning sets gricultural Firefighting sets Industrial applications applications The pump should be installed in an enclosed environment or sheltered from inclement weather. OPTIONS VILLE ON REUEST Counter flange KIT complete with bolts, nuts and washers Other voltages or Hz frequency Compatibility with hotter or colder liquids Compatibility with hotter or colder environments CERTIFICTIONS Company with management system certified DNV ISO : ULITY ISO : ENVIRONMENT
2 PERFORMNCE RNGE Hz n= rpm Head H (metres) / / / / / / / / / / / / / / / / / / / / F l/min Flow rate PERFORMNCE DT Hz n= rpm POWER (P) PERFORMNCE Three-phase kw HP l/min F-/.... IE F-/.. F-/.. IE F-/... F-/ H... IE F-/ H.. F-/C... F-/. IE.. F-/... F-/.... IE F-/... F-/.. IE F-/... F-/ C... F-/. IE. F-/. F-/.. IE F-/.. F-/.. IE F-/.... F-/ C.. F-/.. IE F-/.. F-/ R. F-/ D... F-/ C. F-/. IE. F-/. F-/ R. POWER (P) PERFORMNCE Three-phase kw HP l/min F-/.. IE F-/... F-/ C... F-/. IE.. F-/.. F-/.. IE F-/ R F-/... IE F-/... F-/ D... F-/ C... IE F-/.. F-/. F-/. IE F-/.... F-/.... IE F-/. F-/-N... IE F-/-N.. F-/ C.. F-/.. IE.. F-/.... F-/... IE F-/... = Flow rate H = Total manometric head Tolerance of characteristic curves in compliance with EN ISO Grade. Performance class of the three-phase motor (IEC--)
3 F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/ F Head H (metres) bsorbed power P (kw).... MEI. F-/ η = %..... P (HP) NPSH () H () l/min Flow rate POWER (P).... Three-phase kw HP l/min F-/ F-/ = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
4 F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/ F Head H (metres) bsorbed power P (kw). MEI. F-/ η = %. l/min P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP l/min F-/.... F-/..,... = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
5 F-/H CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/H F Head H (metres) bsorbed power P (kw).... MEI. F-/H Flow rate η = % H H.... l/min P (HP) NPSH () H () POWER (P)..... Three-phase kw HP l/min F-/H F-/H = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
6 F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m Head H (metres) bsorbed power P (kw). MEI. F-/ F-/ F-/C. C F η =.% l/min P (HP) NPSH () H () Flow rate POWER (P)..... Three-phase kw HP l/min F-/C F-/ F-/ = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
7 F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/ F Head H (metres) bsorbed power P (kw) MEI. F-/ l/min η = %.... P (HP) NPSH () H () Flow rate POWER (P). Three-phase kw HP l/min F-/ F-/ = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
8 F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/ F Head H (metres) bsorbed power P (kw). MEI. F-/ l/min η = %. P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP l/min F-/ F-/ = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
9 F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m Head H (metres) bsorbed power P (kw) F-/ F-/ F-/C MEI. l/min η = %. C F P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP l/min F-/C F-/..... F-/ = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
10 F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/ F Head H (metres) bsorbed power P (kw).... F-/ MEI.. Flow rate η = %,,, l/min P (HP) NPSH () H () POWER (P) Three-phase kw HP l/min F-/ F-/ = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
11 F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/ F F-/ η = % Head H (metres) bsorbed power P (kw).. MEI. Flow rate. l/min P (HP) NPSH () H () POWER (P) Three-phase kw HP l/min F-/ F-/ = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
12 F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F F-/R Head H (metres) bsorbed power P (kw) MEI. F-/ F-/ F-/C η = % C R P (HP) NPSH () H () l/min Flow rate POWER (P) Three-phase kw HP l/min F-/C..... F-/ F-/ F-/R = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
13 F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m Head H (metres) bsorbed power P (kw) MEI. F-/R F-/ F-/ F-/C F-/D η = % D R C F l/min P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP l/min F-/D F-/C F-/ F-/ F-/R = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
14 F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F Head H (metres) bsorbed power P (kw).. MEI. F-/ F-/ η = % l/min.. P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP l/min F-/ F-/ = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
15 F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F F-/ Head H (metres) bsorbed power P (kw) F-/ F-/C MEI. η = % C l/min P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP l/min F-/C F-/ F-/ = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
16 F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F F-/R Head H (metres) bsorbed power P (kw) F-/ MEI. l/min η = % R P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP l/min F-/ F-/R = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
17 F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/ F-/ F Head H (metres) bsorbed power P (kw) MEI. η = % l/min P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP l/min F-/ F-/ = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
18 F- / CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/ F-/ F Head H (metres) bsorbed power P (kw) MEI. F-/C F-/D η = % l/min C D P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP l/min F-/D F-/C F-/ F-/ = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
19 F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/ F F-/ Head H (metres) bsorbed power P (kw) MEI. η = % P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP l/min F-/ F-/ = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
20 F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m Head H (metres) bsorbed power P (kw) MEI. F-/ F-/ Flow rate η = % F l/min P (HP) NPSH () H () POWER (P) Three-phase kw HP l/min F-/ F-/..... = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
21 F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/-N F-/-N F Head H (metres) bsorbed power P (kw) MEI. η = % P (HP) NPSH () H () l/min Flow rate POWER (P) Three-phase kw HP l/min F-/-N F-/-N = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
22 F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F-/ F F-/ Head H (metres) bsorbed power P (kw) MEI. F-/C η = % C l/min P (HP) NPSH () H () Flow rate POWER (P) Three-phase kw HP l/min F-/C F-/ F-/ = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
23 F-/ CHRCTERISTIC CURVES ND PERFORMNCE DT Hz n= rpm HS= m F F-/ Head H (metres) bsorbed power P (kw) MEI. F-/ η = % P (HP) NPSH () H () Flow rate l/min POWER (P) Three-phase kw HP l/min F-/ F-/ = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO Grade.
24 F POS. COMPONENT CONSTRUCTION CHRCTERISTICS PUMP ODY Cast iron, complete with flanged suction and delivery ports ODY CKPLTE Cast iron rass for F-/, /, /, /, /, / IMPELLER Cast iron for F-/, /, /, /, /, /, /, /, F-/, /, /, /, /, / MOTOR SHFT Stainless steel EN - -. MECHNICL SEL Pump Seal Shaft Materials Model Model Diameter Stationary ring Rotational ring Elastomer F-/ F-/ F-/ FN- Ø mm Graphite Ceramic NR F-/ F-/ F-/ F-/ FN- Ø mm Graphite Ceramic NR F-/ F-/ F-/ F-/ F-/ FN- NU Ø mm Graphite Ceramic NR F-/ F-/ F-/ FN- Ø mm Graphite Ceramic NR F-/ F-/ F-/ FN- NU Ø mm Graphite Ceramic NR F-/ F-/ FH- NU Ø mm Graphite Ceramic NR ERINGS Pump Model Pump Model F-/ F-/ F-/ F-/ F-/ F-/ F-/ ZZ-C / ZZ ZZ-C / ZZ-C F-/ F-/ F-/ F-/ F-/ F-/ F-/ F-/ F-/ F-/ F-/ F-/ F-/ ELECTRIC MOTOR F: with poles three-phase / V - Hz The three-phase pumps are fitted with high performance motors up to P=. kw in class IE and from P=. kw in class IE (IEC -) Insulation: class F Protection: IP ZZ-C / ZZ-C ZZ-C / ZZ-C
25 F DIMENSIONS ND WEIGHT a DN f n h DN h h w w n n s DIMENSIONS mm kg Three-phase DN DN a f h h h n n n w w s F-/. F-/. F-/. F-/. F-/H. F-/H. F-/C. F-/.. F-/. F-/. F-/. F-/. F-/. F-/C. F-/... F-/. F-/. F-/. F-/. F-/. F-/C. F-/. F-/. F-/R. F-/D. F-/C. F-/... F-/. F-/R. F-/. F-/. F-/C. F-/... F-/. F-/. F-/R. F-/. F-/. F-/D. F-/C. F-/... F-/. F-/. F-/. F-/. F-/. F-/-N. F-/-N. F-/C. F-/. F-/. F-/. F-/.
26 FLNGED PORTS COUNTER FLNGES (CN E ORDERED SEPRTELY) DN K D F K D DN FLNGES D K HOLES mm mm mm N. Ø (mm) DN FLNGES F D K HOLES mm COUNTER FLNGES mm mm N. Ø (mm) ¼ ½ ½ SORPTION VOLTGE Three-phase V V F-/.. F-/.. F-/.. F-/.. F-/H.. F-/H.. F-/C.. F-/.. F-/.. F-/.. F-/.. F-/.. F-/.. F-/C.. F-/.. F-/.. F-/.. F-/.. F-/.. F-/.. F-/C.. F-/.. F-/.. F-/R.. F-/D.. F-/C.. F-/.. F-/.. F-/R.. VOLTGE Three-phase V V F-/.. F-/.. F-/C.. F-/.. F-/.. F-/.. F-/R.. F-/.. F-/.. F-/D.. F-/C.. F-/.. F-/.. F-/.. F-/.. F-/.. F-/.. F-/-N.. F-/-N.. F-/C.. F-/.. F-/.. F-/.. F-/..
Lowara SPECIFICATIONS
SH Series Centrifugal pumps entirely made of AISI 36 stainless steel according to EN 733 (ex DIN 24255). Designed to pump hot, cold and moderately aggressive liquids. Available versions: SHE Close-coupled
Applications Water distribution
1 FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron designed to pump clean, chemically non-aggressive water and liquids. Available versions:
Lowara APPLICATIONS MATERIALS. General Catalogue
FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron and impeller in AISI 36* stainless steel, designed to pump hot, cold and moderately
LOWARA e-nsce, e-nscs, e-nscf
End suction pumps LOWARA e-nsce, e-nscs, e-nscf Pumps made of cast iron e-nscs e-nscf e-nsce Description Specifications e-nsc normal priming pumps are designed for applications in the industrial and agricultural
High hydraulic efficiency Motor designed to EN standards IDENTIFICATION NAME. F - in line ports with ROUND FLANGES (counterflanges on request)
VLR/VLRI/VLR VLR Vertical multistage centrifugal pumps The VLR are vertical multistage, in-line, centrifugal pumps, directly connected to an electric motor. They are not self-priming. High hydraulic efficiency
Vertical multistage centrifugal pumps in AISI 316 stainless steel
VLRI/X Vertical multistage centrifugal pumps in AISI 316 stainless steel The VLRI/X are vertical multistage, in-line, centrifugal pumps, directly connected to an electric motor. They are not self-priming.
DLG Series. Lowara SPECIFICATIONS APPLICATIONS ACCESSORIES MATERIALS. General Catalogue
DLG Series Submersible pumps with open impeller with grinder assembly for pumping sewage, liquids, wastewater in general and industrial sludge, draining of flooded excavations. SPECIFICATIONS Delivery:
VERTICAL MULTI-CELL CENTRIFUGAL PUMPS IN AISI 316 STAINLESS STEEL
Lenntech info@lenntech.com Tel. +31-152-61-9 www.lenntech.com Fax. +31-152-616-289 NOCCHI VLRI/X HIGH HYDRAULIC EFFICIENCY, ENTIRELY IN AISI 34 STAINLESS STEEL (VLRI) OR AISI 316 (VLRX), STANDARDIZED MOTOR
High pressure centrifugal pumps
High pressure centrifugal pumps Wilo-Multivert MVI (North America) Series description H [ft] 3 1 MVI 1 1 1 MVI 1 MVI 3 MVI MVI 1 1 Q [m³/h] Wilo-Multivert-MVI Hz - North America Q [US gpm] H [m] 1 1 1
HORIZONTAL MULTISTAGE CENTRIFUGAL ELECTRIC PUMPS in AISI 304
Horizontal multistage centrifugal electric pumps stainless steel. APPLICATIONS Industrial washing Pressure boosting units Industrial plants Distribution and treatment of water Heating and air conditioning
- DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX 5/10/ PUMP TABLE MATRIX 5/10/ PACKING 403
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 2-3 IMPELLERS ) 204 PERFORMANCE CURVE 3 ( 4-5-6 IMPELLERS )
MATRIX HORIZONTAL MULTISTAGE CENTRIFUGAL ELECTRIC PUMPS. Your Life, our Quality. Worldwide.
Horizontal multistage centrifugal electric pumps stainless steel APPLICATION Industrial washing Pressure boosting units Industrial plants Distribution and treatment of water Heating and air conditioning
HORIZONTAL MULTISTAGE CENTRIFUGAL ELECTRIC PUMPS in AISI 304
Horizontal multistage centrifugal electric pumps stainless steel. APPLICATIONS Industrial washing Pressure boosting units Industrial plants Distribution and treatment of water Heating and air conditioning
FDL - FXDL FBDL SERIES
FDL - FXDL FBDL SERIES SUBMERSIBLE PUMPS FOR WITH ENTRAINED SOLIDS WASTE WATER Sewage pumps with power up to 22 kw (30 HP). Available in cast iron (FDL), AISI 316 stainless steel (FXDL), B10 bronze (FBDL).
- DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX DIMENSION TABLE MATRIX PACKING 403
CONTENTS Page 1 - SPECIFICATIONS 200-201 PERFORMANCE RANGE 202 SELECTION CHART 203 TYPE KEY and CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 3 ( 2-3-4-5 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 6-7-8-9 IMPELLERS
ZLW Series. Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD
ZLW Series Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD 1 Application Apply as the transportation of liquids in the fields of air condition, heating, sanitary water, water treatment cooling,
MATRIX. EBARA PUMPS EUROPE S.p.A. HORIZONTAL MULTISTAGE PUMPS
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 2-3-4-5 impellers ) 204 PERFORMANCE CURVE 3 ( 6-7-8-9 impellers ) 205
Submittal Data Sheet Wilo Stratos Z - High Efficiency Domestic Hot Water Circulator
Wilo Stratos Z - High Efficiency Domestic Hot Water Circulator Stratos Z.x3- Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head Control Mode Cycle Phase Voltage
- CONSTRUCTIONS 300 SECTIONAL VIEW MATRIX SECTIONAL VIEW MATRIX CONSTRUCTIONS 302 CONSTRUCTIONS 303 MECHANICAL SEAL 304
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 2-3-4-5 impellers ) 204 PERFORMANCE CURVE 3 ( 6-7-8-9 impellers ) 205
Comeo Type Series Booklet
Multistage Horizontal Centrifugal Pump Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
Finish: Anticorrosive finish in polyester. Number of motor poles 4=1400 r/min. 50 Hz 6=900 r/min. 50 Hz 8=750 r/min. 50 Hz
HEP HEPT HEP: Wall-mounted axial fans, with IP65 motor HEPT: Long-cased axial fans, with IP65 motor Wall-mounted axial (HEP) and long-cased (HEPT) fans, with fibreglass-reinforced plastic impeller. Fan:
Page - DIMENSIONS AND WEIGHT 400 PUMP DRAWING 400 DIMENSIONS PUMP TABLE 401 PACKING 402
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 4N1 204 PERFORMANCE CURVE 4N2 205 PERFORMANCE CURVE 4N4 206 PERFORMANCE
Return Line Filters Type RTF10/25
Technical Data Type RTF1/25 Product Description Technical Data Construction Materials Filter head: Sealings: Aluminum NR (una-n ) Other sealing materials on request Options and Accessories Valve Clogging
7AAC63-90 SINGLE-PHASE MOTORS PERMANENT CAPACITOR 7AACC SINGLE-PHASE MOTORS CAP START - CAP RUN. squirrel cage induction motors 7AACC63-100
7AAC63-90 SINGLE-PHASE MOTORS PERMANENT CAPACITOR squirrel cage induction motors 7AACC63-100 SINGLE-PHASE MOTORS CAP START - CAP RUN Electric Motors Division WELLINGBOROUGH 7AACC63-100 EXICO LIMITED, 16
TECHNICAL DATA Date 12/22/15 Series 50GF22.2
TECHNICAL DATA Date 12/22/15 Series 50GF22.2 GF MOTOR SPECIFICATIONS Motor Design Applications Insulation Class Maximum Liquid Temp Frequency RPM Air Filled Waste Water Class B 0-40 C ( 32-104 F ) 60 HZ
Replacement Guide. Wilo Circulators for Heating and Secondary Hot Water Circulation. Pioneering for You
Replacement Guide Wilo Circulators for Heating and Secondary Hot Water Circulation 2013 Pioneering for You Grundfos Single pumps Wilo new High-efficiency pumps infinitely variable, 1~230V, 50Hz Stratos
Group 30. Contents.
Group 30 Contents Pump type Page Pump type Page Pump type Page 30A(C)...X002H 4 30A(C)...X013H 5 30A(C)...X068H 6 30A(C)...X068HU 7 30A(C)...X136H 8 30A(C)...X136Y 9 30A(C)...X146H 10 30A(C)...X160H 11
[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.
![[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.](/thumbs/75/72614325.jpg "[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.")
Gear Pump High Performance Version GP up to, cm (.7 inch ) p max bar ( PSI) Speed from to RPM Technical Features Operating pressure bar, Peak pressure bar High-strength quality aluminum alloys pump with
Submersible MOTORS PRODUCT CATALOGUE
D E E P W E L L Submersible MOTORS PRODUCT CATALOGUE Due to continuous technical developments and improvements in design any changes, alterations and amendments of specifications or technical data are
MOTORI PER VENTILATORI MOTORS FOR BLOWERS
MOTORI PER VENTILATORI MOTORS FOR BLOWERS LR 91167 FLANGIA TIPO A FLANGE TYPE A TIPO / TYPE A B C D E F G H I* L M N O P Q BM.80.A2.1000 315 250 290 20 225 φ 7 155 33 19 h7 114 84 6 21.5 M 8 3/8 BM.80.A2.1001
A31. Aluminium heat exchanger A31
Aluminium heat exchanger A A Before using the heat exchanger, carefully read the document entitled GENERAL OPERATING INSTRUCTIONS FOR HEAT EXCHANGER USE 98SAE7EN - 9-5-8 A V-V Dimensions ± 5 5 L MAX 99
ΕΒΑΘ ΑΝΤΛΙΕΣ EVATH PUMPS.
ΕΒΑΘ ΑΝΤΛΙΕΣ EATH PUMPS www.evath.eu ΟΡΙΖΟΝΤΙΕΣ ΦΥΓΟΚΕΝΤΡΙΚΕΣ ΑΝΤΛΙΕΣ / HORIZONTAL CENTRIFUGAL PUMPS ΜΟΝΟΒΑΘΜΙΕΣ ΙΒΑΘΜΙΕΣ ΤΡΙΒΑΘΜΙΕΣ / SINGLE TWO THREE STAGE ΚΑΤΑΛΛΗΛΕΣ ΓΙΑ ΚΑΘΑΡΟ ΝΕΡΟ Η ΕΛΑΦΡΩΣ ΒΡΩΜΙΚΟ
KYOWA PRODUCT CATALOGUE
KYOWA PRODUCT CATALOGUE We are focusing on the atmospheric future with technology. KYOWA KAKO Co., Ltd. "Eco-MEVIUS" is not only economical but also ecological product development concept proposed by KYOWA
BALL VALVE NP - LEVE 754. Range of application: Temperature range: Perform standard: Order information: Paint: Soft seal Ball valve.
Soft seal Ball valve Unilateral spring washer Seat Float ball valve Flange PN16-40 DN15-200 Range of application: In industrial facilities, oil and chemical industry and related manufacturing industries
ECOL Motors In Aluminum Housing
ECOL Motors In Aluminum Housing FEATURES APPLICATIONS E TBS C TBW B L K AC TBH A AA KK H AD N T E TBS R TBW L AC M 56-160 IM B3 56-160 IM B5 56-160 IM B14 TBH 4-S KK P HD N TBS T E R TBW L AC P M TBH 4-S
Karta Katalogowa CATALOGUE CARD
2001-11-12 KK-01/02 Edycja 6 Strona 1 z 8 Karta Katalogowa CATALOGUE CARD 7UÑMID]RZHVLOQLNLLQGXNF\MQH ZLHORELHJRZH ]ZLUQLNLHPNODWNRZ\P 7KUHHSKDVHLQGXFWLRQ PXOWLSOHVSHHGPRWRUV ZLWKVTXLUUHOFDJHURWRU )$%5
Technical Report. General Design Data of a Three Phase Induction Machine 90kW Squirrel Cage Rotor
Technical Report General Design Data of a Three Phase Induction Machine 90kW Squirrel Cage Rotor Tasos Lazaridis Electrical Engineer CAD/CAE Engineer tasoslazaridis13@gmail.com Three-Phase Induction Machine
[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.
![[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.](/thumbs/93/111947477.jpg "[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.")
Gear Pump High Performance Version GP up to, cm (.7 inch ) p max bar ( PSI) Speed from to RPM Technical Features Nominal pressure bar, peak pressure bar High quality aluminum alloys pump with xial playe
SIEMENS Squirrel Cage Induction Standard Three-phase Motors
- SIEMENS Squirrel Cage Induction Standard Three-phase Motors 2 pole 3000 rpm 50Hz Rated current Power Efficiency Rated Ratio Noise Output Frame Speed Weight 3V 400V 415V factor Class 0%Load 75%Load torque
Borehole Pumps. SCUBA SERIES Close-coupled submersible pumps for 5 wells. GS 4 SERIES Submersible pumps for 4 wells
Borehole Pumps SCUBA SERIES Close-coupled submersible pumps for 5 wells GS SERIES Submersible pumps for wells Z-ZN 6 SERIES Submersible pumps for 6 wells Z-ZR 8 SERIES Submersible pumps for 8 wells Z-ZR
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
2CP Electropompe centrifugale cu turbina dubla
2CP Electropompe centrifugale cu turbina dubla DOMENIUL DE UTILIZARE Capacitate de până la 450 l/min (27 m³/h) Inaltimea de pompare până la 112 m LIMITELE DE UTILIZARE Inaltimea de aspiratie manometrică
Westfalia Bedienungsanleitung. Nr
Westfalia Bedienungsanleitung Nr. 108230 Erich Schäfer KG Tel. 02737/5010 Seite 1/8 RATED VALUES STARTING VALUES EFF 2 MOTOR OUTPUT SPEED CURRENT MOMENT CURRENT TORQUE TYPE I A / I N M A / M N Mk/ Mn %
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Creative TEchnology Provider
1 Oil pplication Capacitors are intended for the improvement of Power Factor in low voltage power networks. Used advanced technology consists of metallized PP film with extremely low loss factor and dielectric
4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
2013 REV 01 ELECTRONICS CAPACITORS. DC Applications Metallized Polypropylene Film Self Healing
2013 REV 01 POWER EECTRONICS CAPACITORS C Applications Metallized Polypropylene Film Healing OUR MISSION: POWER EECTRONICS AN SPECIA CAPACITORS M.V. PFC CAPACITORS AN BANKS IGHTING CAPACITORS MOTOR RUN
Μηχανές Ηλεκτροσύντηξης & Μετ. Συγκόλλησης Εξαρτήματα Ηλεκτροσύντηξης & Μετωπικής Συγκόλλησης PΕ100 Υδρόμετρα Αντλίες
Units For Electro-fusion & utt-fusion Electro-fusion & utt-fusion Fittings PE00 Hydrometers Pumps Μηχανές Ηλεκτροσύντηξης & Μετ. Συγκόλλησης Εξαρτήματα Ηλεκτροσύντηξης & Μετωπικής Συγκόλλησης PΕ00 Υδρόμετρα
, / 230 4,6 / 2, , / 230 5,4 / 2,7
Einstufige Kompressoren mit Einphasen-Wechselstrom Motor; Volumenstrom bis zu 335 m 3 /h Single stage compressors with single phase AC motor; volume flow up to 335 m 3 /h Bestell-Nr. Motor (IP55, Wärmeklasse
ΜΜ917-Σχεδιασμός Ενεργειακών Συστημάτων
ΜΜ917-Σχεδιασμός Ενεργειακών Συστημάτων Ψυκτικός Κύκλος Παρουσίαση και περιγραφή τρόπου λειτουργίας των επιμέρους τμημάτων Βιομηχανικής Ψυκτικής Μονάδας ημήτρης Τζιουρτζιούμης ρ. Μηχανολόγος Μηχανικός
Return Line Filters. Return Line Filters Type RTF10/25. C Technology. Filtration. Product Description. Technical Data. Options and Accessories
Return Line Filters Return Line Filters Type RTF1/25 Product Description Technical Data Options and Accessories Construction Materials Valve Clogging Indicators Port Connection Flow Rating Operating Pressure
LEVITEC INDUSTRIAL BOILERS Steam Way S /5
A1 Type 400 Τύπος A2 Production norm EN-12953 Πρότυπο κατασκευής A3 Quality managment system EN ISO 9001:2008 Σύστημα διαχείρισης ποιότητας B1 Steam production kg/h 400 Ατμοπαραγωγή B2 Working pressure
Heat exchanger. Type WT. For the reheating of airflows in rectangular ducting PD WT 1. 03/2017 DE/en
X X testregistrierung Heat exchanger Type For the reheating of airflows in rectangular ducting Rectangular hot water heat exchanger for the reheating of airflows, suitable for VAV terminal units Type TVR,
Model: MTZ22. Data. Cylinder count: 1 Displacement [m³/h]: 6,63 Cylinder capacity [cm³]: 38,1 RPM [min -1 ]: 2900 Weight [kg]: 21 Oil charge [dm³]: 1
![Model: MTZ22. Data. Cylinder count: 1 Displacement [m³/h]: 6,63 Cylinder capacity [cm³]: 38,1 RPM [min -1 ]: 2900 Weight [kg]: 21 Oil charge [dm³]: 1](/thumbs/90/102819400.jpg "Model: MTZ22. Data. Cylinder count: 1 Displacement [m³/h]: 6,63 Cylinder capacity [cm³]: 38,1 RPM [min -1 ]: 2900 Weight [kg]: 21 Oil charge [dm³]: 1")
Technical data Data Cylinder count: 1 Displacement [m³/h]: 6,63 Cylinder capacity [cm³]: 38,1 RPM [min -1 ]: 2900 Weight [kg]: 21 Oil charge [dm³]: 1 Oil type: 160PZ Crankcase heater type: PTC 35 W Maximum
Specification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)
High CV-value Long Life > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life Optimized designs available on request RoHS Compliant application Basic design Smoothing, energy storage,
Bulletin 1489 UL489 Circuit Breakers
Bulletin 489 UL489 Circuit Breakers Tech Data 489-A Standard AC Circuit Breaker 489-D DC Circuit Breaker 489-A, AC Circuit Breakers 489-D, DC Circuit Breakers Bulletin 489-A Industrial Circuit Breaker
QUICKTRONIC PROFESSIONAL QTP5
osram.com QUICKTRONIC PROFESSIONA QTP5 ECG for T5/ 16mm, T8/ 26mm, DUUX fluorescent lamps QTP5 i.e. UMIUX T5 HO ES 01 Product Features: Up to 100.000 hours lifetime 1 amp start with optimized filament
ΤΕΧΝΙΚΕΣ ΠΡΟ ΙΑΓΡΑΦΕΣ Α.ΑΝΤΛΙΕΣ
Να φέρουν σήµανση CE Σύµφωνα µε τις προδιαγραφές CE 2-3 Υλικά κατασκευής : Κέλυφος από χυτοσίδηρο GG25. ΤΕΧΝΙΚΕΣ ΠΡΟ ΙΑΓΡΑΦΕΣ Α.ΑΝΤΛΙΕΣ Σώµα αντλίας µε προστασία καταφόρεσης. Αντοχή στη διάβρωση µε ειδική
Aerovox Corp. Type H High Voltage AC & DC Capacitors. Film Capacitors for Power Electronics Applications. RoHS Compliant. Highlights.
H Aerovox Corp. Film Capacitors for Power Electronics Applications Specifications Outline Drawing Capacitance Range: AC Voltage Range: DC Voltage Range: Temperature Range: Capacitance Tolerance: Dissipation
LEVITEC INDUSTRIAL BOILERS Steam Way S /5
A1 Type 300 Τύπος A2 Production norm EN-12953 Πρότυπο κατασκευής A3 Quality managment system EN ISO 9001:2008 Σύστημα διαχείρισης ποιότητας B1 Steam production kg/h 300 Ατμοπαραγωγή B2 Working pressure
Siemens AG Rated current 1FK7 Compact synchronous motor Natural cooling. I rated 7.0 (15.4) 11.5 (25.4) (2.9) 3.3 (4.4)
Synchronous motors Siemens 2009 FK7 Compact motors Nural cooling Selection and ordering da Red speed Shaft height n red S P red ΔT=00 K rpm kw (P) Red power Stic torque M 0 ΔT=00 K Red torque ) M red ΔT=00
IE3 IE2. 100% From Europe. Squirrel-Cage Low Voltage Motor. Premium Efficiency. High Efficiency. Made in Europe. Converter fed Motor.
Made in urope Best Choise of nergy Saving I3 Squirrel-Cage ow Voltage Motor According to IC034-30:2008 standard CNS140:2012 standard Premium fficiency I2 High fficiency rom urope Protectoin IP55,TC Insulation,
ΦΥΓΟΚΕΝΤΡΕΣ ΑΝΤΛΙΕΣ CENTRIFUGAL PUMPS
ΦΥΓΟΚΕΝΤΡΕΣ ΑΝΤΛΙΕΣ CENTRIFUGAL PUMPS Edition 2009-2010 Η εταιρία µας, Α.Παπαδόπουλος & Σια Ο.Ε. µε την εµπορική ονοµασία Orca Pumps, δραστηριοποιείται στο χώρο της κατασκευής και εµπορίας υποβρύχιων αντλιών,
Units For Electro-fusion & Butt-fusion Electro-fusion & Butt-fusion Fittings HDPE-100 Hydrometers Pumps
Units For Electro-fusion & utt-fusion Electro-fusion & utt-fusion Fittings HDPE-00 Hydrometers Pumps Μηχανές Ηλεκτροσύντηξης & Μετωπικής Συγκόλλησης Εξαρτήματα Ηλεκτροσύντηξης & Μετωπικής Συγκόλλησης HDPΕ-00
Type 441 DIN 442 DIN. Flanged Safety Relief Valves spring loaded
Type 442 DIN Plain lever H3 Open bonnet Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded Contents Chapter/Page Type 441 DIN Packed lever H4 Closed bonnet Materials 01/02 Balanced bellows
NKT NTC Thermistor. Negative Temperature Coefficient Thermistor FEATURES
FEATURES Large, strong capacity of suppression of inrush current Big material (B value), small residual Small size, Long life, high reliability and fast response APPLICATIONS Switching -supply, switch,
CJBD/ALF CJBX/ALS CJBX/ALF CJBD/ALS VENTILATION UNITS WITH ALUMINIUM PROFILES. According EU Regulation
CJBD/AL CJBD/ALS CJBD/ALF CJBX/AL CJBX/ALS CJBX/ALF VENTILATION UNITS WITH ALUMINIUM PROFILES According EU Regulation CJBD/AL CJBD/ALS CJBD/ALF CJBD/AL: Soundproofed ventilation units with profiles in
SVH with HYDROVAR (HVL range)
SVH with HYDROVAR (HVL range) Lenntech info@lenntech.com Tel. +31-1-1-9 www.lenntech.com Fax. +31-1-1-89 SVH-HVL Rev. B Ed.9/1 (EN) SVH SERIES (e-sv WITH HYDROVAR) Background and context For all pumping
Περιγραφή κατασκευαστικής σειράς: Wilo-Drain MTS
Περιγραφή κατασκευαστικής σειράς: Wilo-Drain H/ft 16 1 12 1 8 6 2 1 2 3 5 6 7 Wilo-Drain / E Q/US g.p.m. Σχεδιασμός Submersible grinder pump with single-channel impeller for sewage as submersible monobloc
UDZ Swirl diffuser. Product facts. Quick-selection. Swirl diffuser UDZ. Product code example:
UDZ Swirl diffuser Swirl diffuser UDZ, which is intended for installation in a ventilation duct, can be used in premises with a large volume, for example factory premises, storage areas, superstores, halls,
COPELAND SCROLL AIR COOLED CONDENSING UNITS
R404A Refrigerant Scroll R507A Refrigerant R134A Refrigerant STANDARD UNIT WITH: Copeland ZB Scroll Compressors for medium temp applications on R404A/R507A/R134A Copeland ZB & ZF Scroll Compressors for
ELWOOD HIGH PERFORMANCE MOTORS H-SERIES MOTOR DATA
H-SERIES MOTOR DATA MOTOR MODEL H-3007 H-3016 H-4030-P H-4030-M H-4040 H-4050 H-4075 H-6100 H-6200 H-6300 MECHANICAL DATA (1) Rated Torque, Cont (Stall) 0.8 2.3 3.4 3.4 5.0 6.8 10.2 11.3 22.6 36.7 lb-in
APPLICATIONS TECHNOLOGY. Leaded Discs N.03 N.06 N.09
NC Disc hermistors ND 03/06/09 NE 03/06/09 NV 06/09 APPLICAIONS ND or NE: Commerical, Industrial and Automotive Applications AEC-Q200 Qualified NV: Professional Applicationsl Alarm and temperature measurement
e-sh Series ErP 2009/125/EC 50 Hz
Hz e-sh Series HORIZONTAL CENTRIFUGAL ELECTRIC PUMPS ACCORDING TO EN 733 MADE IN AISI 31 STAINLESS STEEL AND EQUIPPED WITH IE3 MOTORS ErP 9/1/EC Cod. 19191 Rev. B Ed.7/1 Xylect TM Xylect TM is a pump solution
TM ZX. Copeland EazyCool TM. ZX Digital. Μηχανήµατα Εξωτερικής Χρήσης
TM ZX Copeland EazyCool TM ZX Digital Μηχανήµατα Εξωτερικής Χρήσης Copeland EazyCool TM ZX Αγορές Στόχοι Καταστήµατα Τροφίµων και πώλησης φαγητού, όπως Mini Markets Αλυσίδες Εστίασης / Γρήγορου Φαγητού
B37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Ceramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Έκπτωση -25% GS GS GS ΨΗΣΤΑΡIEΣ ΣΧΑΡΑΣ ΑΕΡIΟΥ-ΝΕΡΟΥ ΤYΠΟΥ 2000
ΨΗΣΤΑΡIEΣ ΣΧΑΡΑΣ ΑΕΡIΟΥ-ΝΕΡΟΥ ΤYΠΟΥ 2000 GS1 2000 GS2 2000 Ψησταριά Αερίου Με Ένα Καυστήρα Και Μια ΙΝΟΧ Σχάρα Με Το Νερό Στο Συρτάρι L70ΧW45ΧH47 30 KG Ψησταριά Αερίου Με Δύο Καυστήρες Και Δύο ΙΝΟΧ Σχάρες
Type 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
NMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
NTC Thermistor:SCK Series
Features. RoHS & HF compliant 2. Body size: Ф5mm ~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70
the smartest energy Floor standing DHW (Domestic Hot Water) storage tanks for Forced Circulation Solar systems
the smartest energy Floor standing DHW (Domestic Hot Water) storage tanks for Forced Circulation olar systems www.thermicsol.com 15 Floor standing single coil DHW storage tanks Material: teel sheet EN-10130
WIRE WOUND CHIP INDUCTORS
FEATURES High Self-Resonance Frequency Stable inductance at high frequency Tight inductance tolerance High Q factory High current Low DCR APPLICATIONS Antenna amplifiers Mobile phone Key entry GPS (Global
ΕΞΑΡΤΗΜΑΤΑ ΥΔΡΑΥΛΙΚΑ. Hydraulic Fittings. Threaded plastic accessories with both male, and female type thread for use in hydraulic networks.
ΕΞΑΡΤΗΜΑΤΑ ΥΔΡΑΥΛΙΚΑ Hydraulic Fittings Description: Threaded plastic accessories with both male, and female type thread for use in hydraulic networks. Range: From Ø 3/8" up to Ø 4". Pressure Rating: 10
ΜΟΝΑΔΑ ΓΕΩΘΕΡΜΙΚΗ ΑΝΣΛΙΑ ΘΕΡΜΟΣΗΣΑ ΣΗ ΕΔΡΑΗ Β. ΡΑΜΟΤΣΑΚΗ
ΜΟΝΑΔΑ ΓΕΩΘΕΡΜΙΚΗ ΑΝΣΛΙΑ ΘΕΡΜΟΣΗΣΑ ΣΗ ΕΔΡΑΗ Β. ΡΑΜΟΤΣΑΚΗ Κτήριο Κεντρικό κτήριο γραφείων Έδρασης Επιφάνεια 2860 m² Θερμικά φορτία 249 kw - Ψυκτικά φορτία 273 kw Παραγωγή Τπάρχον σύστημα θέρμανσης-ψύξης
SMD Power chokes- SPD Series SPD series chokes For High Current Use
SMD Power chokes- SPD Series SPD series chokes For High Current Use Features 1.Shielded construction. 2.High current rating up to DC Amp 3.High frequency range up to 5.MHz 4.Ultra low buzz noise, due to
DC054B Series Salient Characteristics
www.pittman-motors.com US: +1 7 933 25 sia: +86 57 58 Harleysville, P 4 DC SERO MOTORS BRUSH COMMUTTED DC MOTORS Previous XXX Series The DC54B series brush commutated DC motor is a 54 mm diameter unit
GAUGE BLOCKS. Grade 0 Tolerance for the variation in length. Limit deviation of length. ± 0.25μm. 0.14μm ±0.80μm. ± 1.90μm. ± 0.40μm. ± 1.
GAUGE BLOCKS Accuracy according to ISO650 Nominal length (mm) Limit deviation of length Grade 0 Tolerance for the variation in length Grade Grade Grade Grade 2 Limit deviations of Tolerance for the Limit
NTC Thermistor:SCK Series
Features. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φmm:-40~+70
Contents MRL HYDRAULIC LIFTS TYPE: HYDRO TOTAL MRL. Version: 3.0 Page: 2/18 Date:
Page: 2/18 Contents 3D LAYOUT... 3 TECHNICAL SPECIFICATION... 4 ACTING 2:1... 4 LAYOUT ARRANGEMENT: ACTING 2:1... 5 SINGLE ENTRANCE GUIDE RAILS AT THE SIDE... 5 Plan view... 5 SINGLE ENTRANCE GUIDE RAILS
motori elettrici electric motors
motori elettrici electric motors MORGAN LLOYD INSPECTION AND TESTING SERVICES Frame size Level of sound pressure Lp - Livello della pressione sonora Lp Grandezza motore p = Lp - db (A) p = Lp - db (A)
PERFOMANCE TABLE FOR 3M SERIES 3000 R.P.M. / 2 POLES LRT RLT. Eff % P.F. COSΦ. Duty Type : (S1) Rated Voltage : 400 V / 440 V
Pn kw PERFOMANCE TABLE FOR 3M SERIES 3000 R.P.M. / 2 VOLTAGE Speed RPM Eff % P.F. COSΦ LRT LRA RLA BDT Noise LwdB(A) W kg J Kgm2 380 400 415 63 M1 0.18 0.53 0.50 0.48 2720 65.0 0.80 2.3 5.5 2.2 50 14.00031
Electrical Specifications at T AMB =25 C DC VOLTS (V) MAXIMUM POWER (dbm) DYNAMIC RANGE IP3 (dbm) (db) Output (1 db Comp.) at 2 f U. Typ.
Surface Mount Monolithic Amplifiers High Directivity, 50Ω, 0.5 to 5.9 GHz Features 3V & 5V operation micro-miniature size.1"x.1" no external biasing circuit required internal DC blocking at RF input &
Dimensions in inches (mm)
SGMH Dimensions in inches (mm) () 3-Bit Incremental Encoder, without Brake 30 (0.04hp), 50 (0.07hp), 00 (0.3hp) ENCODER CBE, Φ0.24 (Φ6) U20276.8 (300) ±.8 (30) MOTOR CBE, Φ0.28 (Φ7) U88 or U3535.38 (35)
Series of Wafer Check Valves Design:API 594, API 6D
Wafer Check Valves Series of Wafer Check Valves Design:API 594, API 6D Dual-Plate Wafer Check Valve : Type:C1 Dual-Plate Wafer Check Valve for by-pass Type:C2 Dual-Plate Double-Flanged Check Valve : Type:C3
ΜΗΧΑΝΟΛΟΓΙΚΟΣ ΕΞΟΠΛΙΣΜΟΣ 2017
ΜΗΧΑΝΟΛΟΓΙΚΟΣ ΕΞΟΠΛΙΣΜΟΣ 2017 13 CΟΜPACT MONOBLOC ΣΥΣΤΗΜΑΤΑ ΦΙΛΤΡΑΝΣΗΣ ΓΙΑ ΠΙΣΙΝΕΣ ΧΩΡΙΣ ΑΔΕΙΑ ΜΟΝΟ ΜΕ ΑΠΛΗ ΕΓΚΡΙΣΗ ΕΡΓΑΣΙΩΝ ΜΙΚΡΗΣ ΚΛΙΜΑΚΑΣ ΙΔΑΝΙΚΟ ΚΑΙ ΓΙΑ ΑΝΑΚΑΙΝΙΣΕΙΣ- ΑΝΑΚΑΤΑΣΚΕΥΕΣ ΠΙΣΙΝΑΣ ΒΙΛΕΣ ΜΕ
Engineering Data High-wall Type (3 series) Indoor Unit. Contents MMK-AP0073H MMK-AP0093H MMK-AP0123H MMK-AP0153H MMK-AP0183H MMK-AP0243H.
E09-311 Engineering Data High-wall Type (3 series) Indoor Unit Model name: MMK-AP0073H MMK-AP0093H MMK-AP0123H MMK-AP0153H MMK-AP0183H MMK-AP0243H Contents 1 Specifications 2 Dimensions 3 Center of gravity
Βιομηχανικές απορροφητικές σκούπες
The is the industrial vacuum cleaner conceived for heavy duty applications in food, pharma, chemical, packaging and OEM industry. Designed into compliance with GMP requirements, it is most powerful vac
MARKET INTRODUCTION System integration
MARKET INTRODUCTION System integration Air to Water Split System Inverter Driven Nomιnal Capacities : 5-6,5-9 - 11,5 kwth Max LWT= 60 C & Min OAT = -15 C COP>= 4.1 Air to Water Monoblock Inverter Driven