Lowara APPLICATIONS MATERIALS. General Catalogue
|
|
|
- Ἀλεξανδρεύς Κυπραίος
- 6 χρόνια πριν
- Προβολές:
Transcript
1 FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron and impeller in AISI 36* stainless steel, designed to pump hot, cold and moderately aggressive liquids. Available versions: FHE Close-coupled with special motor shaft extension. FHS With stub shaft and standard motor. FHF With adapter, support, flexible coupling, base and standard motor according to EN 733 (ex DIN 24255). SPECIFICATIONS Delivery: up to 700 m 3 /h Head: up to 00 m Power supply: three-phase and single-phase 50 and 60 Hz Power: 0.25 kw to 32 kw Maximum operating pressure: 2 bar PN2 up to FH80 flanges PN6 for FH00,25,50 Temperature of pumped liquid: -20 C to +85 C (FH32 to 80) -30 C to +20 C (FH00 to 50) Insulation class: F Protection: IP55 MATERIALS Pump body: Cast iron Impeller: Stainless steel for sizes 32, 40, 50 and Cast iron for remaining sizes Adapter: Aluminium or Cast iron Mechanical seal: Ceramic/Carbon/NBR Elastomers: NBR APPLICATIONS Water distribution Heating, ventilation Pressure boosting, irrigation Industrial washing equipment, swimming pools Cooling and chilling General industry, water treatment Heat recovery, filtration equipment Auxiliary equipment, fire-fighting equipment Available on request: version with Hydrovar frequency converter version with efficiency level motor on FHS and FHF version with 4-pole motor version with bronze impeller * Check material table for availability For a complete list of technical information, consult 54
2 LIST OF MODELS, FH 50 Hz SERIES 2 POLES SIZE kw FHEM FHE FHS FHF 32-25/ / / / / / / / / / / / / / / / /0A / / / / / / / / /0A / / / / / / / / /0A / / / / / / / / / / / / / / / / = Available VERSION SIZE kw fh_fhe-fhs-fhf_2p50_c_tem VERSION FHS FHF 00-60/85 8, / / /85 8, / / / / / / / / / / / / / / / = Available lm_fhs_fhf_2p50_c_tem 55
3 LIST OF MODELS, FH 50 Hz SERIES 4 POLES SIZE kw VERSION FHE4 FHS4 FHF /02A 0, /02 0, /02 0, /03 0, /03 0, /05 0, /07 0, /, /02A 0, /02 0, /03 0, /03 0, /05 0, /07 0, /, /, /5, /22 2, /03A 0, /03 0, /05 0, /07 0, /, /, /5, /22A 2, /22 2, / /05 0, /07 0, /, 65-60/, 65-60/5, /22 2, /5, /22 2, / / / /55 5, / /55 5, /75 7, /0A / /5, /22 2, / / / /55 5, /75 7, /55 5, /75 7, / / /85 8, / / = Available fh_fhe4-fhs4-fhf4_4p50-en_c_tem SIZE kw VERSION FHS4 FHF /22 2, / / /22 2, / /55 5, / /55 5, /75 7, / / /85 8, / / / / /55 5, /75 7, /75 7, / / /85 8, /75 7, / / /85 8, / / / / / / / / /85 8, / / / / / / / / / / / / = Available lm_fhs4-fhf4_4p50-en_d_tem 56
4 FH SERIES HYDRAULIC PERFORMANCE TABLE AT 50 Hz, 2 POLES PUMP RATED Q = DELIVERY TYPE POWER l/min m 3 /h kw HP H = TOTAL HEAD IN COLUMN OF WATER (METRES) 32-25/07* 0,75 6,9 4,6 8, /*,,5 2,9 9,6 6,3 4, /5*,5 2 27,3 24,5 20,5 7, /22* 2,2 3 34, ,3 8, / ,2 39,8 35,2 32,2 24,6 9, /40 4 5,5 54, ,9 34,6 30, /55 5,5 7, , /75 7, , /*,,5 4,5 3,3 0, 5, /5*,5 2 8, 6,7 5 3,9 9, /22* 2,2 3 24, , 5,8 2,3 8, / ,5 29,4 27,5 26, 2,5 7, /40 4 5, , ,5 24,5 20, /55 5,5 7,5 46,5 44 4,5 40,2 34,5 29, /75 7, ,5 4 36, /** ** ** , / , / /22* 2, , 4 2,8,4 6, / ,8 8 6,9 5,6 0, /40 4 5, , 22,5 2,5 20,3 5,8, /55 5,5 7, ,6 29, ,6 20,5 4, /75 7, , /** ** ** 50,5 46, ,9 32,5 25, / , / /85 8, / , /40 4 5,5 9 7,3 6,8 4,5 3, /55 5,5 7,5 23 2,3 20,9 9 7,5 6,7 3, /75 7, ,6 24, , /** ** ** 33 3, , 24 2, / ,5 33 3,5 30, , / ,5 37, , / , ,2 36, /85 8, , / , ,5 44, / , / , / / , ,5 22, / , , /85 8, ,5 35, ,5 23, / ,5 4 32,5 24, / , , , / / , / * Single-phase version ( FHEM ) also available fhe-fhs-fhf-2p50_b_th ** /92 = 9.2kW - 2.5HP FHE ** /0 = kw - 5HP FHS Performance complies with ISO Annex A. 57
5 FH SERIES HYDRAULIC PERFORMANCE TABLE AT 50 Hz, 2 POLES PUMP RATED Q = DELIVERY TYPE POWER l/min m 3 /h 0 79, kw HP H = TOTAL HEAD IN COLUMN OF WATER (METRES) 00-60/85 8, ,7 26,8 26, ,8 24,5 2,4 7,4 2, / ,7 32,4 3, ,6 22,2 6, / , ,5 26 9, /85 8, ,4 34, ,4 29,5 23,2 5, / , ,2 24, / , , / , / ,6 53, ,5 4, / ,8 68, , / ,5 78, / ,8 9, / , / ,4 30,5 29, 26,5 23,9 2,4 9 6, / , ,2 36,2 32,9 29,4 2, / ,3 55, ,5 29,5 23, / ,9 64, , / , 74, , / ,6 86, / ,8 96, ,7 Performances complies with ISO Annex A. lm-fhs-fhf-2p50_c_th 58
6 FH SERIES HYDRAULIC PERFORMANCE TABLE AT 50 Hz, 4 POLES PUMP RATED Q = DELIVERY TYPE POWER l/min kw HP m 3 /h 0 4, , H = TOTAL HEAD METRES COLUMN OF WATER 32-25/02A* 0,25 0,33 4,4 3,9 3,5 2,5, /02* 0,25 0,33 5,5 5 4,7 3,8 3, 2, /02* 0,25 0,33 6,5 5,8 5,4 4,3 3,6 2, /03* 0,37 0,5 8,5 7,7 7,3 6 5,7 4, /03* 0,37 0,5 9,9 8,7 8, 6,7 5, /05* 0,55 0,75 2,5,3 0,7 9,3 8,4 7, /07 0,75 9,4 7,7 6,7 3,8, /,,5 22,5 20,8 9,9 7,0 5 2, /02A* 0,25 0,33 4 3,8 3,6 3,4 2, /02* 0,25 0,33 5, 4,7 4,5 4,3 3, 40-25/03* 0,37 0,5 6,3 5,8 5,6 5,4 4,2 2, /03* 0,37 0,5 7,4 6,7 6,4 6, 4, /05* 0,55 0,75 9, 8,4 8,2 7,9 6,3 4, /07 0,75,6 0,8 0,5 0,2 8, /,,5 4, 3,2 2,9 2,6 0,8 8, /,,5 5 3,7 3,3 3,2 8,5 6, /5,5 2 7,5 6,2 5,8 5,5 3,5 0,8 9, /22 2, ,3 9 8,5 6,6 4 2,4 0, /03A* 0,37 0,5 4,3 3,9 3,4 3, 2,7, /03* 0,37 0,5 5,0 4,4 3,9 3,6 3,3 2, /05* 0,55 0,75 6 5,5 5, 4,7 4,4 3,5 2, /07 0,75 7,9 7,4 6,8 6,3 5,8 4, /,,5 9,7 9, 8,5 8, 7,6 6,5 5, /,,5 2, 0,8 9,9 9,2 8,6 7, 5, /5,5 2 3,9 2,6,6 0,9 0,2 8,6 6,7 5, /22A 2,2 3 6,5 5,6 4,6 4 3,2,4 9, /22 2,2 3 8,6 7,4 6,5 5,9 5,2 3,4 0, 9, / , ,5 7,8 6,2 4, /05 0,55 0,75 4,6 4, 4 3,8 3,4 2,9 2, /07 0,75 5,6 5,2 5 4,9 4,5 4,2 3, /,,5 6,6 6,3 6,2 6, 5,9 5, /,,5 8,0 7,3 7 6,6 6, /5, ,3 8 7,6 7, /22 2,2 3 0,3 9,8 9,5 9, /5, ,6 9, 8,5 8, /22 2,2 3 2,4 2,2,8, / ,4 4,3 3,8 3,4 3, / ,4 4,8 4,6 3,9 3, 2, /40 4 5,5 9 8,6 8,3 7,8 7,2 6, /55 5,5 7,5 22,3 2,5 2,3 20,9 20,3 9, /40 4 5,5 8,6 8,3 8, 7,9 7,3 6,7 6, /55 5,5 7,5 22, 2,8 2,7 2,6 2,2 20,6 20, /75 7,5 0 26,5 26,2 26, 26 25,6 25,2 24, /0A 5 30,6 30,5 30,4 30, ,7 29, /0 5 34,8 34,7 34,6 34,5 34,2 33,9 33, /5,5 2 7,2 7, 80-60/22 2,2 3 8,5 8, /30 3 4,2, /40 4 5,5 3,8 3, /40 4 5,5 6,5 6, /55 5,5 7,5 9,8 9, /75 7,5 0 23,6 23, /55 5,5 7,5 9,7 9,5 9,4 9,2 9, 80-35/75 7,5 0 24,6 24,4 24,3 24, 23, /0 5 29,9 29,7 29,6 29,5 29, / , ,8 36,6 36, /85 8, ,3 39,7 39, / , 44,7 44, / , 54,7 54,7 2,6 4,2 4,8 3,4 6 4,6 7,8 6,5 5,0 6,4 4,6 9,3 7,6,3 9,6 7,5 9,7 6,7 4,4,7 7,7 5, 2,0 3,3 7, ,8 7,6 27,9 25,8 22,8 8,6 32, 30,2 27,4 23,7 8,7 6,4 5,5 4,6 3,5 8,0 7,4 6,6 5,7 5 0, 9,2 8 6,6 3,3 2,4, ,8 3,2,4 9 8,4 7,2 5,5 3,5, 22,5 2,3 9,9 8, 6 8, 6,8 5 2,8 0, 23 2,9 20,4 8,6 6,3 28,8 28, 27 25,5 23,6 6,5 3,5 35,6 34,7 33,6 32,4 30,9 25, , 38,4 37,3 35,9 34, 27,3 24,5 44,2 43,6 42,6 4,4 39,8 33,4 30,7 54, ,3 52,2 50,9 45,4 43,2 * FHE4 VERSION ONLY fhe4-fhs4-fhf4-4p50-en_d_th Performances according to ISO Annex A. 59
7 FHS4-FHF4 SERIES HYDRAULIC PERFORMANCE TABLE AT 50 Hz, 4 POLES PUMP RATED Q = DELIVERY TYPE POWER l/min kw HP m 3 /h /22 2,2 3 5,9 5,9 5,9 5,8 5,7 5,5 4,9 4,6 4, / ,2 8,2 8, 8, 8 7,9 7,2 6,9 6,5 5, 00-60/40 4 5, ,9 9,7 9 8,7 8,3 6,9 6, /22 8,5 8,3 8,2 7,9 7,5 5,9 5,2 4, /40 4 5,5,8,8,8,6,4 0,3 9,7 9, 6,8 5, /55 5,5 7,5 4,8 4,7 4,7 4,7 4,5 3,8 3,5 3, 0, /40 4 5,5 2,9 2,9 2,6 2, 0, 9,2 8, /55 5,5 7,5 5,9 5,9 5,7 5,5 4, 3,4 2,5 9,2 7, /75 7,5 0 9,5 9,5 9,4 9,2 8, 7,6 6,9 4 2, /0 5 24,3 24,3 24,2 24, 23, 22,7 22, 9,7 8,6, / ,9 29,7 29,5 28,6 28, 27, , /85 8, ,4 34,2 33,3 32,8 32, , / ,8 36,7 35,9 35,5 35, 33,2 32,4 26, / , , / , 56, , /40 4 5,5 7,9 7,4 6,7 6,5 6,2 5,4 5,2 3, /55 5,5 7,5,4 0,8 0,2 0 9,7 8,9 8,6 6, /75 7,5 0 4, 3,6 3, 2,9 2,7,9,6 9, /75 7,5 0 5,4 5,3 5 4,8 4,6 3,6 3, /0 5 9,4 9,3 9, 9 8,9 8, 7,8 5,3, / ,2 23,3 23, 23 22, ,8 6,5 2, /85 8, ,6 25,5 25,5 25,4 25,3 24,9 24, ,3 6, /75 7,5 0 4,4 4,4 3,9 3,7 3,5 2,6 2,2 0, 7, /0 5 8,0 8, 7,8 7,7 7,5 6,8 6,5 4,5,8 8, / ,6 22,6 22,3 22, 2,9 2,2 2 9,2 6,7 3, /85 8, ,3 26,9 26,7 25,9 25,6 23,3 9,7 4, / ,7 29,6 28,9 28,6 26,5 23,2 8, / ,6 35,4 35,3 34,8 34,6 32,9 30, 26, 25-35/ , ,9 37,4 37,2 35,7 33, 29,4 7, / ,4 32,8 32,5 32, 30,5 29,7 24,7 7, / ,5 40,3 39,2 38,6 34,4 27,5 8, / ,4 5 50,9 50,8 50, 49, ,2 34, / ,5 56,3 56,3 56,2 55,9 55,7 53,8 50,3 44,7 26, / ,5 6,8 5,9 4,7 3,2 9, /85 8,5 25 2,3 20,8 20 8,9 7,5 3, / , ,8 7, / , ,5 23,5 22 8, / ,2 29, ,9 26,4 22, / ,6 33,5 32,7 3,7 30,4 26, / ,7 37,6 36,9 35,9 34,7 3, / ,3 38,4 37,2 33, / ,9 32 3,7 30,2 28,2 25,5 8, / ,3 37,5 37, ,4 24, / ,8 42, , / ,2 47, , / , / , Performances according to ISO Annex A. H = TOTAL HEAD METRES COLUMN OF WATER 8,7 2 3,8 2,4 26,5 29,4 2,2 29, ,2 37,7 lm-fhs4fhf4-4p50-en_d_th 60
8 FH SERIES OPERATING CHARACTERISTICS AT 50 Hz, 2 POLES These NPSH values are valid in laboratory conditions; for practical purposes, values should be increased by a 0.5 m safety margin. These performances are valid for liquids with density ρ =.0 kg/dm 3 and kinematic viscosity ν = mm 2 /s. 6
9 FH SERIES OPERATING CHARACTERISTICS AT 50 Hz, 2 POLES These NPSH values are valid in laboratory conditions; for practical purposes, values should be increased by a 0.5 m safety margin. These performances are valid for liquids with density ρ =.0 kg/dm 3 and kinematic viscosity ν = mm 2 /s. 62
10 FH SERIES OPERATING CHARACTERISTICS AT 50 Hz, 2 POLES These NPSH values are valid in laboratory conditions; for practical purposes, values should be increased by a 0.5 m safety margin. These performances are valid for liquids with density ρ =.0 kg/dm 3 and kinematic viscosity ν = mm 2 /s. 63
11 FH SERIES OPERATING CHARACTERISTICS AT 50 Hz, 2 POLES These NPSH values are valid in laboratory conditions; for practical purposes, values should be increased by a 0.5 m safety margin. These performances are valid for liquids with density ρ =.0 kg/dm 3 and kinematic viscosity ν = mm 2 /s. 64
12 FH SERIES OPERATING CHARACTERISTICS AT 50 Hz, 2 POLES These NPSH values are valid in laboratory conditions; for practical purposes, values should be increased by a 0.5 m safety margin. These performances are valid for liquids with density ρ =.0 kg/dm 3 and kinematic viscosity ν = mm 2 /s. 65
13 FH SERIES OPERATING CHARACTERISTICS AT 50 Hz, 2 POLES These NPSH values are valid in laboratory conditions; for practical purposes, values should be increased by a 0.5 m safety margin. These performances are valid for liquids with density ρ =.0 kg/dm 3 and kinematic viscosity ν = mm 2 /s. 66
14 FH SERIES OPERATING CHARACTERISTICS AT 50 Hz, 4 POLES These NPSH values are valid in laboratory conditions; for practical purposes, values should be increased by a 0.5 m safety margin. These performances are valid for liquids with density ρ =.0 kg/dm 3 and kinematic viscosity ν = mm 2 /s. 67
15 FH SERIES OPERATING CHARACTERISTICS AT 50 Hz, 4 POLES These NPSH values are valid in laboratory conditions; for practical purposes, values should be increased by a 0.5 m safety margin. These performances are valid for liquids with density ρ =.0 kg/dm 3 and kinematic viscosity ν = mm 2 /s. 68
16 FH SERIES OPERATING CHARACTERISTICS AT 50 Hz, 4 POLES These NPSH values are valid in laboratory conditions; for practical purposes, values should be increased by a 0.5 m safety margin. These performances are valid for liquids with density ρ =.0 kg/dm 3 and kinematic viscosity ν = mm 2 /s. 69
17 FH SERIES OPERATING CHARACTERISTICS AT 50 Hz, 4 POLES These NPSH values are valid in laboratory conditions; for practical purposes, values should be increased by a 0.5 m safety margin. These performances are valid for liquids with density ρ =.0 kg/dm 3 and kinematic viscosity ν = mm 2 /s. 70
18 FH SERIES OPERATING CHARACTERISTICS AT 50 Hz, 4 POLES These NPSH values are valid in laboratory conditions; for practical purposes, values should be increased by a 0.5 m safety margin. These performances are valid for liquids with density ρ =.0 kg/dm 3 and kinematic viscosity ν = mm 2 /s. 7
19 FH SERIES OPERATING CHARACTERISTICS AT 50 Hz, 4 POLES These NPSH values are valid in laboratory conditions; for practical purposes, values should be increased by a 0.5 m safety margin. These performances are valid for liquids with density ρ =.0 kg/dm 3 and kinematic viscosity ν = mm 2 /s. 72
20 FH SERIES OPERATING CHARACTERISTICS AT 50 Hz, 4 POLES These NPSH values are valid in laboratory conditions; for practical purposes, values should be increased by a 0.5 m safety margin. These performances are valid for liquids with density ρ =.0 kg/dm 3 and kinematic viscosity ν = mm 2 /s. 73
21 FH SERIES OPERATING CHARACTERISTICS AT 50 Hz, 4 POLES These NPSH values are valid in laboratory conditions; for practical purposes, values should be increased by a 0.5 m safety margin. These performances are valid for liquids with density ρ =.0 kg/dm 3 and kinematic viscosity ν = mm 2 /s. 74
22 FH SERIES OPERATING CHARACTERISTICS AT 50 Hz, 4 POLES These NPSH values are valid in laboratory conditions; for practical purposes, values should be increased by a 0.5 m safety margin. These performances are valid for liquids with density ρ =.0 kg/dm 3 and kinematic viscosity ν = mm 2 /s. 75
23 FHE SERIES - DIMENSIONS AND WEIGHTS, 2 POLES 76
24 FHE SERIES - DIMENSIONS AND WEIGHTS, 2 POLES PUMP TYPE DIMENSIONS (mm) PUMP STAND B H L k DNM DNA a h2 w x b c c h m m n n s max kg FHE 32-25/ FHE 32-25/ FHE 32-60/ FHE 32-60/ FHE / FHE / FHE 40-25/ ,8 FHE 40-25/ FHE 40-25/ FHE 40-60/ FHE 40-60/ FHE / FHE / FHE / FHE / FHE / FHE 50-25/ FHE 50-25/ FHE 50-25/ FHE 50-60/ FHE 50-60/ FHE / FHE / FHE / FHE / FHE / FHE 65-25/ FHE 65-25/ FHE 65-25/ FHE 65-60/ FHE 65-60/ FHE 65-60/ FHE / FHE / FHE / FHE / FHE 80-60/ FHE 80-60/ FHE 80-60/ FHE / WEIGHT fh-fhe-2p50-en_c_td 77
25 FHS SERIES - DIMENSIONS AND WEIGHTS, 2 P0LES 78
26 FHS SERIES - DIMENSIONS AND WEIGHTS, 2 POLES PUMP TYPE DIMENSIONS (mm) PUMP STAND B H L k DNM DNA a f h2 w x b c c h m m n n s max kg FHS 32-25/ FHS 32-25/ FHS 32-60/ FHS 32-60/ FHS / FHS / FHS 40-25/ FHS 40-25/ FHS 40-25/ FHS 40-60/ FHS 40-60/ FHS / FHS / FHS /0A FHS / FHS / FHS 50-25/ FHS 50-25/ FHS 50-25/ FHS 50-60/ FHS 50-60/ FHS /0A FHS / FHS / FHS / FHS / FHS 65-25/ FHS 65-25/ FHS 65-25/ FHS 65-60/0A FHS 65-60/ FHS 65-60/ FHS / FHS / FHS / FHS / FHS / FHS / FHS 80-60/ FHS 80-60/ FHS 80-60/ FHS / FHS / FHS / FHS / FHS / WEIGHT fh-fhs-2p50-en_d_td 79
27 FHS SERIES - DIMENSIONS AND WEIGHTS, 2 POLES 80
28 FHS SERIES - DIMENSIONS AND WEIGHTS, 2 POLES PUMP TYPE DIMENSIONS (mm) WEIGHT PUMP STAND B H L k DNM DNA a f h2 w x b c h m m n n n2 n3 s max kg FHS00-60/ FHS00-60/ FHS00-200/ FHS00-200/ lm-fhs-2p50-en_b_td 8
29 FHE4 SERIES - DIMENSIONS AND WEIGHTS, 4 POLES 82
30 FHE4 SERIES - DIMENSIONS AND WEIGHTS, 4 POLES PUMP TYPE DIMENSIONS (mm) PUMP STAND B H L k DNM DNA a h2 w x b c h m m n n s max kg FHE /02A FHE / FHE / FHE / FHE / FHE / FHE /02A FHE / FHE / FHE / FHE / FHE / FHE / FHE / FHE / FHE / FHE /03A FHE / FHE / FHE / FHE / FHE / FHE / FHE /22A FHE / FHE / FHE / FHE / FHE / FHE / FHE / FHE / FHE / FHE / FHE / FHE / FHE / FHE / FHE / FHE / FHE / FHE / FHE / FHE / FHE / WEIGHT fh-fhe4-4p50-en_c_td 83
31 FHS4 SERIES - DIMENSIONS AND WEIGHTS, 4 POLES 84
32 FHS4 SERIES - DIMENSIONS AND WEIGHTS, 4 POLES PUMP TYPE DIMENSIONS (mm) WEIGHT PUMP STAND B H L k DNM DNA a f h2 w x b c h m m n n s max kg FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS /22A FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / NOTE: For models FHS and FHS consult the following pages. fh-fhs4-4p50-en_c_td 85
33 FHS4 SERIES - DIMENSIONS AND WEIGHTS, 4 POLES 86
34 FHS4 SERIES - DIMENSIONS AND WEIGHTS, 4 POLES PUMP TYPE DIMENSIONS (mm) WEIGHT PUMP STAND B H L k DNM DNA a f h2 w x b c h m m n n n2 n3 s max kg FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / FHS / lm-fhs4-4p50-en_c_td 87
35 2FHE SERIES - DIMENSIONS AND WEIGHTS, 2 POLES DIMENSIONI E PESI SERIE 2FHE 2 poli 50 Hz PUMP TYPE DIMENSIONS (mm) L w x 2FHE / FHE / WEIGHT kg fhe-2p50-en_b_td 2FHE SERIES - DIMENSIONS AND WEIGHTS, 4 POLES DIMENSIONI E PESI SERIE 2FHE4 4 poli 50 Hz PUMP TYPE 2FHE /07 2FHE / WEIGHT kg fhe4-4p50-en_b_td 88
Applications Water distribution
1 FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron designed to pump clean, chemically non-aggressive water and liquids. Available versions:
Lowara SPECIFICATIONS
SH Series Centrifugal pumps entirely made of AISI 36 stainless steel according to EN 733 (ex DIN 24255). Designed to pump hot, cold and moderately aggressive liquids. Available versions: SHE Close-coupled
DLG Series. Lowara SPECIFICATIONS APPLICATIONS ACCESSORIES MATERIALS. General Catalogue
DLG Series Submersible pumps with open impeller with grinder assembly for pumping sewage, liquids, wastewater in general and industrial sludge, draining of flooded excavations. SPECIFICATIONS Delivery:
LOWARA e-nsce, e-nscs, e-nscf
End suction pumps LOWARA e-nsce, e-nscs, e-nscf Pumps made of cast iron e-nscs e-nscf e-nsce Description Specifications e-nsc normal priming pumps are designed for applications in the industrial and agricultural
FDL - FXDL FBDL SERIES
FDL - FXDL FBDL SERIES SUBMERSIBLE PUMPS FOR WITH ENTRAINED SOLIDS WASTE WATER Sewage pumps with power up to 22 kw (30 HP). Available in cast iron (FDL), AISI 316 stainless steel (FXDL), B10 bronze (FBDL).
VERTICAL MULTI-CELL CENTRIFUGAL PUMPS IN AISI 316 STAINLESS STEEL
Lenntech info@lenntech.com Tel. +31-152-61-9 www.lenntech.com Fax. +31-152-616-289 NOCCHI VLRI/X HIGH HYDRAULIC EFFICIENCY, ENTIRELY IN AISI 34 STAINLESS STEEL (VLRI) OR AISI 316 (VLRX), STANDARDIZED MOTOR
High hydraulic efficiency Motor designed to EN standards IDENTIFICATION NAME. F - in line ports with ROUND FLANGES (counterflanges on request)
VLR/VLRI/VLR VLR Vertical multistage centrifugal pumps The VLR are vertical multistage, in-line, centrifugal pumps, directly connected to an electric motor. They are not self-priming. High hydraulic efficiency
Vertical multistage centrifugal pumps in AISI 316 stainless steel
VLRI/X Vertical multistage centrifugal pumps in AISI 316 stainless steel The VLRI/X are vertical multistage, in-line, centrifugal pumps, directly connected to an electric motor. They are not self-priming.
50 Hz n= 1450 rpm. Standardised EN 733 centrifugal pumps. PERFORMANCE RANGE Flow rate up to 3000 l/min (180 m³/h) Head up to 24 m INSTALLATION AND USE
F Standardised EN centrifugal pumps Hz n= rpm Clean water Industrial use PERFORMNCE RNGE Flow rate up to l/min ( ) Head up to m PPLICTION LIMITS Manometric suction lift up to m Liquid temperature between
HORIZONTAL MULTISTAGE CENTRIFUGAL ELECTRIC PUMPS in AISI 304
Horizontal multistage centrifugal electric pumps stainless steel. APPLICATIONS Industrial washing Pressure boosting units Industrial plants Distribution and treatment of water Heating and air conditioning
High pressure centrifugal pumps
High pressure centrifugal pumps Wilo-Multivert MVI (North America) Series description H [ft] 3 1 MVI 1 1 1 MVI 1 MVI 3 MVI MVI 1 1 Q [m³/h] Wilo-Multivert-MVI Hz - North America Q [US gpm] H [m] 1 1 1
MATRIX HORIZONTAL MULTISTAGE CENTRIFUGAL ELECTRIC PUMPS. Your Life, our Quality. Worldwide.
Horizontal multistage centrifugal electric pumps stainless steel APPLICATION Industrial washing Pressure boosting units Industrial plants Distribution and treatment of water Heating and air conditioning
HORIZONTAL MULTISTAGE CENTRIFUGAL ELECTRIC PUMPS in AISI 304
Horizontal multistage centrifugal electric pumps stainless steel. APPLICATIONS Industrial washing Pressure boosting units Industrial plants Distribution and treatment of water Heating and air conditioning
MATRIX. EBARA PUMPS EUROPE S.p.A. HORIZONTAL MULTISTAGE PUMPS
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 2-3-4-5 impellers ) 204 PERFORMANCE CURVE 3 ( 6-7-8-9 impellers ) 205
ZLW Series. Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD
ZLW Series Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD 1 Application Apply as the transportation of liquids in the fields of air condition, heating, sanitary water, water treatment cooling,
- CONSTRUCTIONS 300 SECTIONAL VIEW MATRIX SECTIONAL VIEW MATRIX CONSTRUCTIONS 302 CONSTRUCTIONS 303 MECHANICAL SEAL 304
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 2-3-4-5 impellers ) 204 PERFORMANCE CURVE 3 ( 6-7-8-9 impellers ) 205
- DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX 5/10/ PUMP TABLE MATRIX 5/10/ PACKING 403
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 2-3 IMPELLERS ) 204 PERFORMANCE CURVE 3 ( 4-5-6 IMPELLERS )
Borehole Pumps. SCUBA SERIES Close-coupled submersible pumps for 5 wells. GS 4 SERIES Submersible pumps for 4 wells
Borehole Pumps SCUBA SERIES Close-coupled submersible pumps for 5 wells GS SERIES Submersible pumps for wells Z-ZN 6 SERIES Submersible pumps for 6 wells Z-ZR 8 SERIES Submersible pumps for 8 wells Z-ZR
- DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX DIMENSION TABLE MATRIX PACKING 403
CONTENTS Page 1 - SPECIFICATIONS 200-201 PERFORMANCE RANGE 202 SELECTION CHART 203 TYPE KEY and CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 3 ( 2-3-4-5 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 6-7-8-9 IMPELLERS
Page - DIMENSIONS AND WEIGHT 400 PUMP DRAWING 400 DIMENSIONS PUMP TABLE 401 PACKING 402
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 4N1 204 PERFORMANCE CURVE 4N2 205 PERFORMANCE CURVE 4N4 206 PERFORMANCE
Finish: Anticorrosive finish in polyester. Number of motor poles 4=1400 r/min. 50 Hz 6=900 r/min. 50 Hz 8=750 r/min. 50 Hz
HEP HEPT HEP: Wall-mounted axial fans, with IP65 motor HEPT: Long-cased axial fans, with IP65 motor Wall-mounted axial (HEP) and long-cased (HEPT) fans, with fibreglass-reinforced plastic impeller. Fan:
4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
Comeo Type Series Booklet
Multistage Horizontal Centrifugal Pump Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
P-PAB-PSA Series Peripheral Pumps. SP Series Self-priming Pumps with Side Channel. BG Series Self-priming Centrifugal Pumps with Ejector
General Catalogue Contents P-PAB-PSA Series Peripheral Pumps 5 P-PAB-PSA SP Series Self-priming Pumps with Side Channel 11 SP BG Series Self-priming Centrifugal Pumps with Ejector 14 BG HM - HMS Series
7AAC63-90 SINGLE-PHASE MOTORS PERMANENT CAPACITOR 7AACC SINGLE-PHASE MOTORS CAP START - CAP RUN. squirrel cage induction motors 7AACC63-100
7AAC63-90 SINGLE-PHASE MOTORS PERMANENT CAPACITOR squirrel cage induction motors 7AACC63-100 SINGLE-PHASE MOTORS CAP START - CAP RUN Electric Motors Division WELLINGBOROUGH 7AACC63-100 EXICO LIMITED, 16
4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
SVH with HYDROVAR (HVL range)
SVH with HYDROVAR (HVL range) Lenntech info@lenntech.com Tel. +31-1-1-9 www.lenntech.com Fax. +31-1-1-89 SVH-HVL Rev. B Ed.9/1 (EN) SVH SERIES (e-sv WITH HYDROVAR) Background and context For all pumping
ECOL Motors In Aluminum Housing
ECOL Motors In Aluminum Housing FEATURES APPLICATIONS E TBS C TBW B L K AC TBH A AA KK H AD N T E TBS R TBW L AC M 56-160 IM B3 56-160 IM B5 56-160 IM B14 TBH 4-S KK P HD N TBS T E R TBW L AC P M TBH 4-S
Submittal Data Sheet Wilo Stratos Z - High Efficiency Domestic Hot Water Circulator
Wilo Stratos Z - High Efficiency Domestic Hot Water Circulator Stratos Z.x3- Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head Control Mode Cycle Phase Voltage
Heat exchanger. Type WT. For the reheating of airflows in rectangular ducting PD WT 1. 03/2017 DE/en
X X testregistrierung Heat exchanger Type For the reheating of airflows in rectangular ducting Rectangular hot water heat exchanger for the reheating of airflows, suitable for VAV terminal units Type TVR,
Replacement Guide. Wilo Circulators for Heating and Secondary Hot Water Circulation. Pioneering for You
Replacement Guide Wilo Circulators for Heating and Secondary Hot Water Circulation 2013 Pioneering for You Grundfos Single pumps Wilo new High-efficiency pumps infinitely variable, 1~230V, 50Hz Stratos
Submersible MOTORS PRODUCT CATALOGUE
D E E P W E L L Submersible MOTORS PRODUCT CATALOGUE Due to continuous technical developments and improvements in design any changes, alterations and amendments of specifications or technical data are
Group 30. Contents.
Group 30 Contents Pump type Page Pump type Page Pump type Page 30A(C)...X002H 4 30A(C)...X013H 5 30A(C)...X068H 6 30A(C)...X068HU 7 30A(C)...X136H 8 30A(C)...X136Y 9 30A(C)...X146H 10 30A(C)...X160H 11
TECHNICAL DATA Date 12/22/15 Series 50GF22.2
TECHNICAL DATA Date 12/22/15 Series 50GF22.2 GF MOTOR SPECIFICATIONS Motor Design Applications Insulation Class Maximum Liquid Temp Frequency RPM Air Filled Waste Water Class B 0-40 C ( 32-104 F ) 60 HZ
e-sh Series ErP 2009/125/EC 50 Hz
Hz e-sh Series HORIZONTAL CENTRIFUGAL ELECTRIC PUMPS ACCORDING TO EN 733 MADE IN AISI 31 STAINLESS STEEL AND EQUIPPED WITH IE3 MOTORS ErP 9/1/EC Cod. 19191 Rev. B Ed.7/1 Xylect TM Xylect TM is a pump solution
Aluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
B37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
PERFOMANCE TABLE FOR 3M SERIES 3000 R.P.M. / 2 POLES LRT RLT. Eff % P.F. COSΦ. Duty Type : (S1) Rated Voltage : 400 V / 440 V
Pn kw PERFOMANCE TABLE FOR 3M SERIES 3000 R.P.M. / 2 VOLTAGE Speed RPM Eff % P.F. COSΦ LRT LRA RLA BDT Noise LwdB(A) W kg J Kgm2 380 400 415 63 M1 0.18 0.53 0.50 0.48 2720 65.0 0.80 2.3 5.5 2.2 50 14.00031
BALL VALVE NP - LEVE 754. Range of application: Temperature range: Perform standard: Order information: Paint: Soft seal Ball valve.
Soft seal Ball valve Unilateral spring washer Seat Float ball valve Flange PN16-40 DN15-200 Range of application: In industrial facilities, oil and chemical industry and related manufacturing industries
2013 REV 01 ELECTRONICS CAPACITORS. DC Applications Metallized Polypropylene Film Self Healing
2013 REV 01 POWER EECTRONICS CAPACITORS C Applications Metallized Polypropylene Film Healing OUR MISSION: POWER EECTRONICS AN SPECIA CAPACITORS M.V. PFC CAPACITORS AN BANKS IGHTING CAPACITORS MOTOR RUN
Terminal Contact UL Insulation Designation (provided with) style form system approval Flux tight
eatures A miniature PCB Power Relay. form A contact configuration with quick terminal type. 5KV dielectric strength, K surge voltage between coils to contact. Ideal for high rating Home Appliances of heating
Karta Katalogowa CATALOGUE CARD
2001-11-12 KK-01/02 Edycja 6 Strona 1 z 8 Karta Katalogowa CATALOGUE CARD 7UÑMID]RZHVLOQLNLLQGXNF\MQH ZLHORELHJRZH ]ZLUQLNLHPNODWNRZ\P 7KUHHSKDVHLQGXFWLRQ PXOWLSOHVSHHGPRWRUV ZLWKVTXLUUHOFDJHURWRU )$%5
SIEMENS Squirrel Cage Induction Standard Three-phase Motors
- SIEMENS Squirrel Cage Induction Standard Three-phase Motors 2 pole 3000 rpm 50Hz Rated current Power Efficiency Rated Ratio Noise Output Frame Speed Weight 3V 400V 415V factor Class 0%Load 75%Load torque
[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.
![[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.](/thumbs/75/72614325.jpg "[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.")
Gear Pump High Performance Version GP up to, cm (.7 inch ) p max bar ( PSI) Speed from to RPM Technical Features Operating pressure bar, Peak pressure bar High-strength quality aluminum alloys pump with
Aluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
UDZ Swirl diffuser. Product facts. Quick-selection. Swirl diffuser UDZ. Product code example:
UDZ Swirl diffuser Swirl diffuser UDZ, which is intended for installation in a ventilation duct, can be used in premises with a large volume, for example factory premises, storage areas, superstores, halls,
ACTORS IEC CONT Ex9C
IEC CONTCTORS Ex9C Ex9C Product Overview Features C-3 contactor ratings from 630 and C-1 contactor ratings to 800 voltages from 24~600, 50/60 Hz Full Non-Reversing (FVNR) and Full Reversing (FVR) 5 k @
A31. Aluminium heat exchanger A31
Aluminium heat exchanger A A Before using the heat exchanger, carefully read the document entitled GENERAL OPERATING INSTRUCTIONS FOR HEAT EXCHANGER USE 98SAE7EN - 9-5-8 A V-V Dimensions ± 5 5 L MAX 99
MVSI. Technical features. Motor shaft In treated steel alloy (Isothermic hardening) resistant to stress.
Technical features Power supply Three-phase voltage from 24V to 690V, 50Hz or 60Hz or single-phase 100-130V, 60Hz and 200-240V, 50Hz (single-phase types are supplied without capacitor); suitable for use
Contactors and Relays
Catalog Contactors and Relays Ex9C and Ex9RD Series Ex9RD93 Ex9CDS25 Ex9CK32 www.noarkusa.com NOARK Electric Electrical Equipment Supplier for Distribution and Control NOARK Electric is a global supplier
Safety Barriers. 6 Safety Barriers KP00 III en Preferred products in stock or available at short notice
5-- KP III en Contents Single-Channel INTRINSPAK 9 8 Dual-Channel INTRINSPAK 9 with Electronic Current Limitation INTRINSPAK 94 You will find further information on the Internet www.stahl.de General Information
MRL HYDRAULIC LIFTS TYPE:
DRO MRL MRL HYDRAULIC LIFTS TYPE: HYD Version: 1.1 Date: 26/04/2012 Page: 1/17 Range of Application 1 Version: 1.1 Date: 26/04/2012 Page: 2/17 Contents 3D LAYOUT... 3 TECHNICAL SPECIFICATION... 4 ACTING
, / 230 4,6 / 2, , / 230 5,4 / 2,7
Einstufige Kompressoren mit Einphasen-Wechselstrom Motor; Volumenstrom bis zu 335 m 3 /h Single stage compressors with single phase AC motor; volume flow up to 335 m 3 /h Bestell-Nr. Motor (IP55, Wärmeklasse
Digital motor protection relays
Digital motor protection relays Specification DMP -S & DMP -Sa DMP -T & DMP -Ta Model No. DMP06-S/Sa DMP60-S/Sa DMP06-T/Ta DMP60-T/Ta Wiring Screw type Tunnel type Panel mount Unit or Extension Note1)
[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.
![[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.](/thumbs/93/111947477.jpg "[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.")
Gear Pump High Performance Version GP up to, cm (.7 inch ) p max bar ( PSI) Speed from to RPM Technical Features Nominal pressure bar, peak pressure bar High quality aluminum alloys pump with xial playe
Return Line Filters Type RTF10/25
Technical Data Type RTF1/25 Product Description Technical Data Construction Materials Filter head: Sealings: Aluminum NR (una-n ) Other sealing materials on request Options and Accessories Valve Clogging
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
NTC Thermistor:TSM type
Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended
MS20 High-Efficiency Mini-Split System
MS20 High-Efficiency Mini-Split System Up to 20 SEER Performance Product Features R-410A chlorine-free refrigerant High-efficiency performance up to 20 SEER DC Inverter technology compressor Indoor antibacterial
MS15 High-Efficiency Mini-Split System
MS15 High-Efficiency Mini-Split System Up to 15 SEER Performance Product Features R-410A chlorine-free refrigerant High-efficiency performance: up to 15 SEER DC Inverter technology compressor Auto-restart
Series of Wafer Check Valves Design:API 594, API 6D
Wafer Check Valves Series of Wafer Check Valves Design:API 594, API 6D Dual-Plate Wafer Check Valve : Type:C1 Dual-Plate Wafer Check Valve for by-pass Type:C2 Dual-Plate Double-Flanged Check Valve : Type:C3
TYJX Series Rare Earth Permanent Magnet Excited Three Phase Synchronous Motor
TYJX Series Rare Earth Permanent Magnet Excited Three Phase Synchronous Motor 1 Meaning of SPEED 1500RPM 4-POLES 50HZ TYJX 315 L2-4 200kW IP55 Protection Output KW Output HP Speed r/min Full load current
± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:
![± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:](/thumbs/85/91419422.jpg "± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:")
TS-UP Series 85 C, 3000 hours Compact size for general purpose and industrial applications 2 and 3 pin versions available 20mm lengths for low profile applications RoHS Compliant Rated Working Voltage:
C4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
NTC Thermistor:SCK Series
Features. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φmm:-40~+70
NTC Thermistor:SCK Series
Features. RoHS & HF compliant 2. Body size: Ф5mm ~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
FLAME-X 950 (N)HXCH FE180/E90 0,6/1kV DIN VDE 0266, DIN
Halogen- free low smoke fire resistant security power cables with copper concentric conductor CONSTRUCTION Conductors: bare copper conductor, circular solid class 1 (RE) or stranded circular or circular
Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Surface Mount Multilayer Inductor
FETURES 0603, 0805, 0806 ND 1008 CSE SIZES HIGH CURRENT ND LOW RESISTNCE NEW "S" VERSION FOR INCRESED STURTION CURRENT UGRDED "H" VERSION FOR HIGHEST CURRENT REFLOW SOLDERING LICBLE CKGE FOR UTOMTIC ICKLCE
Βιομηχανικές απορροφητικές σκούπες
The is the industrial vacuum cleaner conceived for heavy duty applications in food, pharma, chemical, packaging and OEM industry. Designed into compliance with GMP requirements, it is most powerful vac
RANGE OF APPLICATION HYDRO TOTAL MRL. ver sion 3.1 / 26-04-2012. web: www.doppler.gr Email: info@doppler.gr
RANGE OF APPLICATION HYDRO TOTAL MRL ver sion 3.1 / 26-04-2012 Factory Head Office Polykastro Industrial Park 61200 Polykastro, Greece Tel.: +30 23430 20140, 20150 Fax: +30 23430 23701 Athens Office-Showroom
Siemens AG Rated current 1FK7 Compact synchronous motor Natural cooling. I rated 7.0 (15.4) 11.5 (25.4) (2.9) 3.3 (4.4)
Synchronous motors Siemens 2009 FK7 Compact motors Nural cooling Selection and ordering da Red speed Shaft height n red S P red ΔT=00 K rpm kw (P) Red power Stic torque M 0 ΔT=00 K Red torque ) M red ΔT=00
Features. Terminal Contact Enclosure style style form Open type Dust cover Ears on cover Antirotation-tab Ears on top
SONG CHUN Features 20/2 general purpose Power Relays. SPDT, DPDT, TPDT contact configurations. DC & C coils are both available. Optional for flange covers, tapped core w/anti-rotation tab, indicator lamp,
Control cable YSLY-JZ/-JB/-OZ/-OB
Control cable YSLY-JZ/-JB/-OZ/-OB conductor material: bare copper conductor construction: fine stranded, class 5 insulation: PVC TI1 stranding unit: core sheathing material: PVC TM2 colour of outer sheath:
Technical Report. General Design Data of a Three Phase Induction Machine 90kW Squirrel Cage Rotor
Technical Report General Design Data of a Three Phase Induction Machine 90kW Squirrel Cage Rotor Tasos Lazaridis Electrical Engineer CAD/CAE Engineer tasoslazaridis13@gmail.com Three-Phase Induction Machine
Contents MRL HYDRAULIC LIFTS TYPE: HYDRO TOTAL MRL. Version: 3.0 Page: 2/18 Date:
Page: 2/18 Contents 3D LAYOUT... 3 TECHNICAL SPECIFICATION... 4 ACTING 2:1... 4 LAYOUT ARRANGEMENT: ACTING 2:1... 5 SINGLE ENTRANCE GUIDE RAILS AT THE SIDE... 5 Plan view... 5 SINGLE ENTRANCE GUIDE RAILS
KYOWA PRODUCT CATALOGUE
KYOWA PRODUCT CATALOGUE We are focusing on the atmospheric future with technology. KYOWA KAKO Co., Ltd. "Eco-MEVIUS" is not only economical but also ecological product development concept proposed by KYOWA
motori elettrici electric motors
motori elettrici electric motors MORGAN LLOYD INSPECTION AND TESTING SERVICES Frame size Level of sound pressure Lp - Livello della pressione sonora Lp Grandezza motore p = Lp - db (A) p = Lp - db (A)
Alféa Extensa + and Extensa Duo +
Alféa Extensa + and Extensa Duo + FR Document n 1592-2~ 12/07/2013 EN Heat pumps air/water split 1 service and 2 services Technical manual Intended for professionals Completed by the installation and operating
Westfalia Bedienungsanleitung. Nr
Westfalia Bedienungsanleitung Nr. 108230 Erich Schäfer KG Tel. 02737/5010 Seite 1/8 RATED VALUES STARTING VALUES EFF 2 MOTOR OUTPUT SPEED CURRENT MOMENT CURRENT TORQUE TYPE I A / I N M A / M N Mk/ Mn %
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Recommended purity level >4 m(c) / >6 m(c) / >14 m(c) 15/13/10. Type of system/area of application/ Components
Type of system/area of application/ Components Systems with servo hydraulics sensitive to fine contamination Industrial hydraulics Proportional technology High pressure systems Industrial and mobile hydraulics
ΕΒΑΘ ΑΝΤΛΙΕΣ EVATH PUMPS.
ΕΒΑΘ ΑΝΤΛΙΕΣ EATH PUMPS www.evath.eu ΟΡΙΖΟΝΤΙΕΣ ΦΥΓΟΚΕΝΤΡΙΚΕΣ ΑΝΤΛΙΕΣ / HORIZONTAL CENTRIFUGAL PUMPS ΜΟΝΟΒΑΘΜΙΕΣ ΙΒΑΘΜΙΕΣ ΤΡΙΒΑΘΜΙΕΣ / SINGLE TWO THREE STAGE ΚΑΤΑΛΛΗΛΕΣ ΓΙΑ ΚΑΘΑΡΟ ΝΕΡΟ Η ΕΛΑΦΡΩΣ ΒΡΩΜΙΚΟ
NMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
RSDW08 & RDDW08 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (Typ.) CAPACITOR LOAD (MAX.) RSDW08F-03 344mA 3.3V 2000mA 80% 2000μF RSDW08F-05
Pipe E235N (St 37.4 NBK) phosphated and oiled
Pipe E235N (St 37.4 NBK) phosphated and oiled Working Pressure Burst Pressure 4X1ST37.4NBK* 4 x 1.0 3201041000 397 459 555 2600 0.07 6X1ST37.4NBK 6 x 1.0 3201061000 252 289 394 1560 0.12 6X1.5ST37.4NBK
LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
MARKET INTRODUCTION System integration
MARKET INTRODUCTION System integration Air to Water Split System Inverter Driven Nomιnal Capacities : 5-6,5-9 - 11,5 kwth Max LWT= 60 C & Min OAT = -15 C COP>= 4.1 Air to Water Monoblock Inverter Driven
Single-channel Safety Barriers Series 9001
Technical Data Certificates Explosion protection Europe (CENELEC) PTB 01 ATEX 2088 PTB 01 ATEX 2135 (Installation in Zone 2) USA FM Approval 3011002 UL Approval E81680 Canada CSA 1284547 (LR 43394) Russia
Engineering Data High-wall Type (3 series) Indoor Unit. Contents MMK-AP0073H MMK-AP0093H MMK-AP0123H MMK-AP0153H MMK-AP0183H MMK-AP0243H.
E09-311 Engineering Data High-wall Type (3 series) Indoor Unit Model name: MMK-AP0073H MMK-AP0093H MMK-AP0123H MMK-AP0153H MMK-AP0183H MMK-AP0243H Contents 1 Specifications 2 Dimensions 3 Center of gravity
Multilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
DOUBLE STAGE SCISSORS CAR LIFT TYPE:
DOUBLE STAGE TYPE: DP-X1 Version: Page: 1.0 1/10 Date: 18.07.08 Range of Application Page: 2/10 Contents 3D LAYOUT... 3 TECHNICAL SPECIFICATION... 5 THROUGH CAR... 6 Plan view... 6 SINGLE ENTRANCE CAR...
a brand of Bel Lighting group
a brand of Bel Lighting group a brand of Bel Lighting group WHO WE ARE Πέρασαν κιόλας 25 χρόνια απο τη στιγμή που πάρθηκε η φιλόδοξη απόφαση να δημιουργήσουμε την δική μας οικογενειακή επιχείρηση που
MRL HYDRAULIC LIFTS TYPE:
Page: 1/18 Range of Application Page: 2/18 Contents 3D LAYOUT... 3 TECHNICAL SPECIFICATION... 4 ACTING 2:1... 4 LAYOUT ARRANGEMENT: ACTING 2:1... 5 SINGLE ENTRANCE GUIDE RAILS AT THE SIDE... 5 Plan view...
Metal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
the smartest energy Floor standing DHW (Domestic Hot Water) storage tanks for Forced Circulation Solar systems
the smartest energy Floor standing DHW (Domestic Hot Water) storage tanks for Forced Circulation olar systems www.thermicsol.com 15 Floor standing single coil DHW storage tanks Material: teel sheet EN-10130
Metal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
DATA SHEET Surface mount NTC thermistors. BCcomponents
DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped