Dimensional Data - All tolerances (± 0.01) inches x " x.26" (Typ. 2) x " x.51" (Typ. 2)
|
|
- Ἀχείμ Παπανδρέου
- 7 χρόνια πριν
- Προβολές:
Transcript
1 0-700 Volts, 100 Amps Bussmann BH-0 Series Dimensional Data - All tolerances (± 0.25) mm (± 0.01) inches B " " Catalog Symbol: BH-0 Series Base: Light-weight, high temperature thermoplastic Mounting Studs: Plated steel Nut: Plated steel Washer: Spring steel Connector: Tin-plated aluminum. One hole connector accepts #14-2/0 copper wire. Two hole connector accepts #14-1/0 copper wire. Agency Approval: UL Recognized, Guide IZLT2, File E14853 CSA Certified, Class , File Withstand Rating: 200,000A RMS Sym. or interrupting rating of fuse used, whichever is smaller. Temperature Rating (RTI): 140 C 5.33 x " x.26" (Typ. 2) x " x.51" (Typ. 2) A C " " Catalog Code Description: Block Series BH - 0 X X X S Agency Approval 0 No Agency Approval 1 UL Recognition and CSA Certification 2 UL Recognition Only 3 CSA Certification Only Wire Connector 0 No Connector 1 1 Hole for #14-2/0 Copper Wire (for use with Base 0) 2 2 Hole for #14-1/0 Copper Wire (for use with Base 0) Optional Control Wire Screw 1 Ω fiΩ Ω - 16 Stud Size NOTES: 1. Always check applicable end use standards for required spacing between blocks, fuses or other hardware. 2. For applications above 700V, consult appropriate electrical standard for proper creepage distances, clearance distances and insulator voltage withstand ratings. CE logo denotes compliance with European Union Low Voltage Directive ( VAC, VDC). Refer to BIF document #8002 or contact Bussmann Application Engineering at for more information. Form No. BH-0 Page 1 of 2 BIF Doc #1200
2 0-700 Volts, 100 Amps Bussmann BH-0 Series Electrical Characteristics FBP BH-0111 Ω 700V / / / FBP BH-0121 Ω 700V / / / FWA BH-0111 Ω 150V / / / FWH 35A-60A BH-0112 fiω 500V / / / FWH 70A-100A BH-0122 fiω 500V / / / FWP 35A-60A BH-0112 fiω 700V / / / FWP 70A-100A BH-0122 fiω 700V / / / FWX 35A-60A BH-0112 fiω 250V / / / FWX 70A-100A BH-0112 fiω 250V / / / JJS BH-0111 Ω 600V / / / JKS BH-0111 Ω 600V / / / KAB BH-0112 fiω 250V / / / KAB BH-0112 fiω 250V / / / KAC BH-0112 fiω 600V / / / KAC BH-0113 Ω 600V / / / KAX BH-0112 fiω 250V / / / KAX BH-0112 fiω 250V / / / KBC BH-0112 fiω 600V / / / KBC BH-0121 Ω 600V / / / KBH BH-0112 fiω 500V / / / KBH BH-0121 Ω 500V / / / KBP BH-0111 Ω 700V / / / LPJ BH-0111 Ω 600V / / / M0108 thru 170M0167 BH-0112 Ω 660V / / / M0208 thru 170M0267 BH-0111 Ω 660V / / / The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Form No. BH-0 Page 2 of 2 BIF Doc #1200
3 Volts, 400 Amps Bussmann BH-1 Series Dimensional Data mm (±.25) Inches (±.01) " B " " " " " Catalog Symbol: BH-1 Series Base: Light-weight, high temperature thermoplastic Mounting Studs: Plated steel Connector: Tin-plated aluminum. Standard connector accepts #6-250 MCM copper wire Nut: Plated steel Washer: Spring steel Agency Approval: UL Recognized, Guide EZLT2, File E14853 CSA Certified, Class , File Withstand Rating: 200,000A RMS Sym. or interrupting rating of fuse used, whichever is smaller. Temperature Rating (RTI): 140 C (Typ. 3) 6.60 x 9.53 (Typ. 3).26" x.375" x " x.615" C A " Catalog Code Description: Block Series BH - 1XXXS Agency Approval 0 No Agency Approval 1 UL Recognition and CSA Certification 2 UL Recognition Only 3 CSA Certification Only Optional Control Wire Screw Stud Size Wire Connector 1 Ω No Connector 2fiΩ Hole for #6-250 MCM Copper Wire 3 Ω - 16 (for use with Base 1, 2, & 3) NOTES: 1. Always check applicable end use standards for required spacing between blocks, fuses or other hardware. 2. For applications above 700V, consult appropriate electrical standard for proper creepage distances, clearance distances and insulator voltage withstand ratings. CE logo denotes compliance with European Union Low Voltage Directive ( VAC, VDC). Refer to BIF document #8002 or contact Bussmann Application Engineering at for more information. Form No. BH-1 Page 1 of 3 BIF Doc #1201
4 Volts, 400 Amps Bussmann BH-1 Series Electrical Characteristics FBP BH-1133 Ω 700V / / / FWA BH-1131 Ω 150V / / / FWH 125A-200A BH-1132 fiω 500V / / / FWH 225A-400A BH-1133 Ω 500V / / / FWP 125A-200A BH-1133 Ω 700V / / / FWP 250A-400A BH-1133 Ω 700V / / / FWX 125A-200A BH-1132 fiω 250V / / / FWX BH-1132 fiω 250V / / / JJN BH-1133 Ω 300V 1.88 / / / JJS BH-1132 fiω 600V 1.872/ / / JJS BH-1133 Ω 600V / / / KAB BH-1132 fiω 250V / / / KAB BH-1133 Ω 250V / / / KAC BH-1133 Ω 600V / / / KAX BH-1132 fiω 250V / / / KAX BH-1133 Ω 250V / / / KBC BH-1131 Ω 600V / / / KBC BH-1133 Ω 600V / / / KBH BH-1131 Ω 500V / / / KBH BH-1133 Ω 500V / / / KBP BH-1133 Ω 700V / / / KBP BH-1133 Ω 700V / / / SPJ-4B BH-1133 Ω 1000V / / / SPJ-4E BH-1133 Ω 1000V / / / SPP-4B BH-1133 Ω 700V / / / SPP-4E BH-1133 Ω 700V / / / SPP-4F BH-1133 Ω 700V / / / SPP-4H BH-1133 Ω 700V / / / E5448 thru 170E5451 BH-1133 Ω 2500V / / / E7863 thru 170E7864 BH-1133 Ω 2500V / / / E8272 thru 170E8273 BH-1133 Ω 2500V / / / L3661 thru 170L3680 BH-1133 Ω 1000V / / / L3668 thru 170L3670 BH-1133 Ω 1000V / / / L3671 thru 170L3673 BH-1133 Ω 1000V / / / L3675 thru 170L3677 BH-1133 Ω 1000V / / / L3678 thru 170L3680 BH-1133 Ω 1000V / / / L3688 thru 170L3690 BH-1132 fiω 1000V / / / L3691 thru 170L3693 BH-1133 Ω 1000V / / / L3694 thru 170L3696 BH-1132 fiω 1000V / / / L3697 thru 170L3699 BH-1132 fiω 1000V / / / L3775 and 170L3776 BH-1133 Ω 1000V / / / L3779 and 170L3780 BH-1133 Ω 1000V / / / L3783 and 170L3784 BH-1133 Ω 1000V / / / L3787 and 170L3788 BH-1133 Ω 1000V / / / L3791 and 170L3792 BH-1133 Ω 1000V / / / L3795 and 170L3796 BH-1133 Ω 1000V / / / L3800 and 170L3801 BH-1133 Ω 1000V / / / L3804 and 170L3805 BH-1133 Ω 1000V / / / L3808 and 170L3809 BH-1133 Ω 1000V / / / L5777 and 170L5778 BH-1133 Ω 1000V / / / L5779 thru 170L5783 BH-1133 Ω 1000V / / / L5787 and 170L5788 BH-1133 Ω 1000V / / / L5789 thru 170L5793 BH-1133 Ω 1000V / / / Form No. BH-1 Page 2 of 3 BIF Doc #1201
5 Volts, 400 Amps Bussmann BH-1 Series Electrical Characteristics (continued) 170M1308 thru 170M1317 BH-1131 Ω 660V / / / M1318 thru 170M1322 BH-1131 Ω 660V / / / M1358 thru 170M1367 BH-1131 Ω 660V / / / M1368 thru 170M1372 BH-1131 Ω 660V / / / M1408 thru 170M1417 BH-1131 Ω 660V / / / M1418 thru 170M1422 BH-1131 Ω 660V / / / M1458 thru 170M1467 BH-1132 fiω 660V / / / M1468 thru 170M1472 BH-1132 fiω 660V / / / M1508 thru 170M1517 BH-1132 fiω 660V / / / M1518 thru 170M1522 BH-1132 fiω 660V / / / M2608 thru 170M2614 BH-1133 Ω 660V / / / M2615 thru 170M2621 BH-1131 Ω 660V / / / M2658 thru 170M2664 BH-1133 Ω 660V / / / M2665 thru 170M2671 BH-1133 Ω 660V / / / M3008 thru 170M3012 BH-1133 Ω 660V / / / M3013 thru 170M3019 BH-1133 Ω 660V / / / M3058 thru 170M3062 BH-1133 Ω 660V / / / M3063 thru 170M3069 BH-1133 Ω 660V / / / M3108 thru 170M3112 BH-1133 Ω 660V / / / M3113 thru 170M3119 BH-1133 Ω 660V / / / M3138 thru 170M3141 BH-1133 Ω 1250V / / / M3142 thru 170M3148 BH-1133 Ω 1250V / / / M3158 thru 170M3162 BH-1133 Ω 660V / / / M3163 thru 170M3169 BH-1133 Ω 660V / / / M3188 thru 170M3191 BH-1133 Ω 1250V / / / M3192 thru 170M3198 BH-1133 Ω 1250V / / / M3208 thru 170M3212 BH-1133 Ω 660V / / / M3213 thru 170M3219 BH-1133 Ω 660V / / / M3238 thru 170M3241 BH-1133 Ω 1250V / / / M3242 thru 170M3248 BH-1133 Ω 1250V / / / M3258 thru 170M3262 BH-1133 Ω 660V / / / M3263 thru 170M3269 BH-1133 Ω 660V / / / M3308 thru 170M3312 BH-1132 fiω 660V / / / M3313 thru 170M3319 BH-1132 fiω 660V / / / M3358 thru 170M3362 BH-1132 fiω 660V / / / M3363 thru 170M3369 BH-1132 fiω 660V / / / M3608 thru 170M3612 BH-1133 Ω 660V / / / M3613 thru 170M3619 BH-1133 Ω 660V / / / M3658 thru 170M3662 BH-1133 Ω 660V / / / M3663 thru 170M3669 BH-1133 Ω 660V / / / M3688 thru 170M3691 BH-1133 Ω 1250V / / / M3692 thru 170M3697 BH-1133 Ω 1250V / / / M3708 thru 170M3712 BH-1133 Ω 660V / / / M3713 thru 170M3719 BH-1133 Ω 660V / / / M3738 thru 170M3741 BH-1133 Ω 1250V / / / M3742 thru 170M3747 BH-1133 Ω 1250V / / / M3758 thru 170M3762 BH-1133 Ω 660V / / / M3763 thru 170M3769 BH-1133 Ω 660V / / / The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Form No. BH-1 Page 3 of 3 BIF Doc #1201
6 for High-Speed Semiconductor Fuses Volts, 600 Amps Bussmann BH-2 Series Dimensional Data mm (±.25) Inches (±.01) (Typ. 3) x " x.615" 6.60 x " x.375" (Typ. 3) " B " " " Catalog Symbol: BH-2 Series Base: Light weight, high temperature thermoplastic Mounting Studs: Plated steel Connector: Tin-plated aluminum. Standard connector accepts #6-250 MCM copper wire Nut: Plated steel Washer: Spring steel Agency Approval: UL Recognized, Guide IZLT2, File E14853 CSA Certified, Class , File Withstand Rating: 200,000A RMS Sym. or interrupting rating of fuse used, whichever is smaller. Temperature Rating (RTI): 140 C " " A C " Catalog Code Description: Block Series BH - 2XXXS Agency Approval 0 No Agency Approval 1 UL Recognition and CSA Certification 2 UL Recognition Only 3 CSA Certification Only Wire Connector 0 No Connector 3 2 Hole for #6-250MCM Copper Wire (for use with Base 1, 2, & 3) Optional control wire screw Stud Size 1 Ω fiΩ Ω -16 NOTES: 1. Always check applicable end use standards for required spacing between blocks, fuses or other hardware. 2. For applications above 700V, consult appropriate electrical standard for proper creepage distances, clearance distances and insulator voltage withstand ratings. CE logo denotes compliance with European Union Low Voltage Directive ( VAC, VDC). Refer to BIF document #8002 or contact Bussmann Application Engineering at for more information. Form No. BH-2 Page 1 of 2 BIF Doc #1202
7 for High-Speed Semiconductor Fuses Volts, 600 Amps Electrical Characteristics Bussmann BH-2 Series 170E7183 BH-2033 Ω 5000V / / / E7184 BH-2033 Ω 5000V / / / E7185 BH-2033 Ω 5000V / / / E7187 BH-2033 Ω 5000V / / / E7188 BH-2033 Ω 5000V / / / E7189 BH-2033 Ω 5000V / / / E8129 BH-2033 Ω 3300V / / / E9629 BH-2033 Ω 4000V / / / E9630 BH-2033 Ω 4000V / / / The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Form No. BH-2 Page 2 of 2 BIF Doc #1202
8 Volts, 700 Amps Bussmann BH-3 Series Dimensional Data mm (±.25) Inches (±.01) " B " " " Catalog Symbol: BH-3 Series Base: Light weight, high temperature thermoplastic Mounting Studs: Plated steel Connector: Tin-plated aluminum. Standard connector accepts #6-250MCM copper wire Nut: Plated steel Washer: Spring steel Agency Approvals: U.L. Recognized, Guide IZLT2, File E14853 CSA Certified, Class , File Withstand Rating: 200,000A RMS Sym. or interrupting rating of fuse used, whichever is smaller. Temperature Rating (RTI): 140 C (TYP. 3) 6.6 x ".26" x.375" x " x.615" (TYP. 3) " A C " Catalog Code Description: Block Series BH - 3 X X X S Agency Approval 0 No Agency Approval 1 U.L. Recognition and CSA Certification 2 U.L. Recognition Only 3 CSA Certification Only Wire Connector 0 No Connector 3 2 Hole for #6-250MCM Copper Wire (for use with Bases 1, 2, & 3) 4 2 Hole for #4-500MCM Copper Wire (for use with Base 3) - See Note 1 below Optional Control Wire Screw Stud Size 3 Ω - 16L 4 Ω - 14L 5 Ω - 16L NOTES: 1. The #4 connector must be used with either the Ω - 14 or the Ω - 16L stud. 2. The only compatible connector for the Ω - 14 stud is #4. 3. Always check applicable end use standards for required spacing between blocks, fuses or other hardware. 4. For applications above 700V, consult appropriate electrical standard for proper creepage distances, clearance distances and insulator. CE logo denotes compliance with European Union Low Voltage Directive ( Vac, Vdc). Refer to BIF document #8002 or contact Bussmann Application Engineering at for more information. Form No. BH-3 Page 1 of 3 BIF Doc #1203
9 Volts, 700 Amps Bussmann BH-3 Series Electrical Characteristics FBP BH-3144 Ω 700V / / / FBP BH-3144 Ω 700V / / / 4.25 FWA BH-3145 Ω 150V / / / 2.50 FWH 450A-600A BH-3145 Ω 500V / / / 3.53 FWP 450A-600A BH-3144 Ω 700V / / / 5.72 FWX 350A-600A BH-3145 Ω 250V / / / 2.94 JJN BH-3144 Ω 300V 8.66 / / / JJS BH-3144 Ω 600V / / / JKS BH-3145 Ω 600V / / / 5.25 JKS BH-3144 Ω 600V / / / 6.00 KAA BH-3145 Ω 130V / / / KAB BH-3145 Ω 250V / / / KAC BH-3144 Ω 600V / / / 4.75 KAC BH-3144 Ω 600V / / / 4.75 KAX BH-3145 Ω 250V / / / KBC BH-3145 Ω 600V / / / KBP BH-3144 Ω 700V / / / LPJ BH-3145 Ω 600V / / / 5.25 LPJ BH-3144 Ω 600V / / / 6.00 SPJ-5B BH-3144 Ω 1000V / / / SPJ-5E BH-3144 Ω 1000V / / / SPJ-6B BH-3144 Ω 1000V / / / SPJ-6E BH-3144 Ω 1000V / / / SPP-5B BH-3144 Ω 700V / / / SPP-5E BH-3144 Ω 700V / / / SPP-5F BH-3144 Ω 700V / / / SPP-5H BH-3144 Ω 700V / / / SPP-6B BH-3144 Ω 700V / / / SPP-6E BH-3144 Ω 700V / / / SPP-6F BH-3144 Ω 700V / / / SPP-6H BH-3144 Ω 700V / / / SPP-7B BH-3144 Ω 700V / / / SPP-7E BH-3144 Ω 700V / / / SPP-7F BH-3144 Ω 700V / / / SPP-7H BH-3144 Ω 700V / / / L4702 thru 170L4720 BH-3145 Ω 1000V / / / L5195 thru 170L5299 BH-3145 Ω 1000V / / / L7295 thru 170L7296 BH-3145 Ω 1000V / / / L7635 thru 170L7636 BH-3145 Ω 1000V / / / L7697 thru 170L7699 BH-3145 Ω 1000V / / / L8124 thru 170L8379 BH-3145 Ω 1000V / / / L8423 thru 170L8429 BH-3145 Ω 1000V / / / L8684 thru 170L8982 BH-3144 Ω 1000V / / / L9300 thru 170L9302 BH-3144 Ω 1000V / / / L9306 thru 170L9308 BH-3144 Ω 1000V / / / M3020 thru 170M3023 BH-3145 Ω 660V / / / M3070 thru 170M3073 BH-3145 Ω 660V / / / M3120 thru 170M3123 BH-3145 Ω 660V / / / M3170 thru 170M3173 BH-3145 Ω 660V / / / M3220 thru 170M3223 BH-3145 Ω 660V / / / M3270 thru 170M3273 BH-3145 Ω 660V / / / M3320 thru 170M3323 BH-3144 Ω 660V / / / M3370 thru 170M3373 BH-3144 Ω 660V / / / Form No. BH-3 Page 2 of 3 BIF Doc #1203
10 Volts, 700 Amps Bussmann BH-3 Series Electrical Characteristics (continued) 170M3620 thru 170M3623 BH-3145 Ω 660V / / / M3670 thru 170M3673 BH-3145 Ω 660V / / / M3720 thru 170M3723 BH-3145 Ω 660V / / / M3770 thru 170M3773 BH-3145 Ω 660V / / / M4008 thru 170M4017 BH-3145 Ω 660V / / / M4058 thru 170M4067 BH-3145 Ω 660V / / / M4108 thru 170M4117 BH-3145 Ω 660V / / / M4138 thru 170M4247 BH-3145 Ω 1250V / / / M4158 thru 170M4166 BH-3145 Ω 660V / / / M4167 thru 170M4208 BH-3145 Ω 660V / / / M4217 thru 170M4247 BH-3145 Ω 660V / / / M4258 thru 170M4267 BH-3145 Ω 660V / / / M4308 thru 170M4317 BH-3145 Ω 660V / / / M4358 thru 170M4367 BH-3145 Ω 660V / / / M4608 thru 170M4617 BH-3144 Ω 660V / / / M4658 thru 170M4667 BH-3144 Ω 660V / / / M4688 thru 170M4697 BH-3144 Ω 1250V / / / M4708 thru 170M4717 BH-3144 Ω 660V / / / M4738 thru 170M4747 BH-3144 Ω 1250V / / / M4758 thru 170M4767 BH-3144 Ω 660V / / / M5008 thru 170M5013 BH-3145 Ω 660V / / / M5058 thru 170M5063 BH-3145 Ω 660V / / / M5108 thru 170M5113 BH-3145 Ω 660V / / / M5138 thru 170M5147 BH-3145 Ω 1250V / / / M5158 thru 170M5163 BH-3145 Ω 660V / / / M5188 thru 170M5197 BH-3145 Ω 1250V / / / M5208 thru 170M5213 BH-3145 Ω 660V / / / M5238 thru 170M5247 BH-3145 Ω 1250V / / / M5258 thru 170M5263 BH-3145 Ω 660V / / / M5308 thru 170M5313 BH-3145 Ω 660V / / / M5358 thru 170M5363 BH-3145 Ω 660V / / / M5608 thru 170M5613 BH-3144 Ω 660V / / / M5658 thru 170M5663 BH-3144 Ω 660V / / / M5688 thru 170M5696 BH-3144 Ω 1250V / / / M5708 thru 170M5713 BH-3144 Ω 660V / / / M5738 thru 170M5746 BH-3144 Ω 1250V / / / M5758 thru 170M5763 BH-3144 Ω 660V / / / M6008 thru 170M6011 BH-3145 Ω 660V / / / M6058 thru 170M6061 BH-3145 Ω 660V / / / M6108 thru 170M6111 BH-3145 Ω 660V / / / M6138 thru 170M6145 BH-3145 Ω 1250V / / / M6158 thru 170M6161 BH-3145 Ω 660V / / / M6188 thru 170M6195 BH-3145 Ω 1250V / / / M6208 thru 170M6211 BH-3145 Ω 660V / / / M6238 thru 170M6245 BH-3145 Ω 1250V / / / M6258 thru 170M6261 BH-3145 Ω 660V / / / M6308 thru 170M6311 BH-3144 Ω 660V / / / M6358 thru 170M6361 BH-3144 Ω 660V / / / The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. Form No.BH-3 Page 3 of 3 BIF Doc #1203
1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Διαβάστε περισσότερα+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
Διαβάστε περισσότερα0.635mm Pitch Board to Board Docking Connector. Lead-Free Compliance
.635mm Pitch Board to Board Docking Connector Lead-Free Compliance MINIDOCK SERIES MINIDOCK SERIES Features Specifications Application.635mm Pitch Connector protected by Diecasted Zinc Alloy Metal Shell
Διαβάστε περισσότεραSD Series High Power Density, Low Profile, Shielded Inductors
Description Six sizes of shielded drum core inductors with low profiles (as low as.mm) and high power density Inductance range from.47uh to uh Current range from 6. to 88 mps Ferrite shielded, low EMI
Διαβάστε περισσότεραType 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
Διαβάστε περισσότεραCOMPOSITE INSULATOR. ANSI Standard Type COMPOSITE LONGE ROD SUSPENSION INSULATOR. PDI 16mm Diameter Rod Deadend Insulators
COMPOSITE LONGE ROD SUSPENSION INSULATOR PDI 16mm Diameter Rod Deadend Insulators Mechanical Characteristics Item of Length Diameter Net Wt. Torsion SML RTL Proof Cat. Sheds (kg) (N-m) (kn) (kn) (kn) 1
Διαβάστε περισσότεραPolymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
Διαβάστε περισσότεραBreaking capacity: ~200kA Rated voltage: ~690V, 550V. Operating I 2 t-value (A 2 s) Power
SYSTEM NV-NH NV/NH SERIES TYPES gr UQ M M, M-striker pin ~ 5V ~9V Technical data on page 8 Technical data: Application: MCUQ/5A/9V Standards: IEC 9- Breaking capacity: ~ka Rated voltage: ~9V, 55V For battery
Διαβάστε περισσότεραConfigurations: Dimension (mm) B (max) A (max) 0.20 IWCCG1005. Inductance Range IWCCG ~ IWCCG ~ 1000 IWCCG
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Διαβάστε περισσότεραMetal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Διαβάστε περισσότεραAerovox Corp. Type H High Voltage AC & DC Capacitors. Film Capacitors for Power Electronics Applications. RoHS Compliant. Highlights.
H Aerovox Corp. Film Capacitors for Power Electronics Applications Specifications Outline Drawing Capacitance Range: AC Voltage Range: DC Voltage Range: Temperature Range: Capacitance Tolerance: Dissipation
Διαβάστε περισσότεραIWCSeries FEATURES APPLICATION ORDERING CODE TRIGON COMPONENTS. Configurations: Dimension (mm) IWC C G 1608 K 22N T (1) (2) (3) (4) (5) (6) (7)
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Διαβάστε περισσότεραE62-TAB AC Series Features
NEW! E62-TAB AC Series Features Perfect for non-sinusoidal voltages and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated
Διαβάστε περισσότεραInterference Suppression Capacitor
MOLDED BOX CONSTRUCTION, SUPPRESSION CAPACITOR, RADIAL LEAD FEATURES UL, CSA, VDE, CQC, CE, ENEC APPROVALS X2 SAFETY CAP CLASSIFICATION FOR USE IN ACROSS-THE-LINE APPLICATIONS METALLIZED POLYPROPYLENE
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Διαβάστε περισσότεραB37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Διαβάστε περισσότεραE62 AC Series Features
E62 AC Features Perfect for non-sinusoidal s and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated overpressure
Διαβάστε περισσότεραTransient Voltage Suppressor
Transient Suppressor Features Glass passivated junction Low incremental surge resistance, excellent clamping capability Underwriters Laboratory Recognition under UL standard for safety 497B: Isolated Loop
Διαβάστε περισσότερα3M-Series Miniature Pushbutton Switches
Carling Technologies MN- Snap-Action Miniature Pushbutton Switch MS- Sealed Snap-Action Miniature Pushbutton Switch Specifications Contact Rating......... refer to ordering scheme Electrical Life..........
Διαβάστε περισσότεραLong 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction
TS-HA/HB Series 105 C, 3000 hours Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature:
Διαβάστε περισσότεραSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Διαβάστε περισσότεραRF series Ultra High Q & Low ESR capacitor series
RF series Ultra High Q & Low ESR capacitor series FAITHFUL LINK Features Application» High Q and low ESR performance at high frequency» Telecommunication products & equipments:» Ultra low capacitance to
Διαβάστε περισσότερα± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:
TS-UP Series 85 C, 3000 hours Compact size for general purpose and industrial applications 2 and 3 pin versions available 20mm lengths for low profile applications RoHS Compliant Rated Working Voltage:
Διαβάστε περισσότεραFEATURES APPLICATION PRODUCT T IDENTIFICATION PRODUCT T DIMENSION MAG.LAYERS
FEATURES RoHS compliant. Super low resistance, ultra high current rating. High performance (I sat) realized by metal dust core. Frequency Range: up to 1MHz. APPLICATION PDA, notebook, desktop, and server
Διαβάστε περισσότεραC4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
Διαβάστε περισσότεραCapacitors - Capacitance, Charge and Potential Difference
Capacitors - Capacitance, Charge and Potential Difference Capacitors store electric charge. This ability to store electric charge is known as capacitance. A simple capacitor consists of 2 parallel metal
Διαβάστε περισσότεραSEN TRONIC AG 3-2 7 0 0 7 A 3 57 3 3 AB 93 :, C,! D 0 7 % 0 7 3 3 93 : 3 A 5 93 :
# 3-270 07A35733 AB93:,C,!D 07% 0733 93: 3A593:!"#$%% &%&''()*%'+,-. &%&''(/*%'+0. 1*23 '4# 54/%6%7%53 *323 %7 77# %%3#% 8908/"/*55 :1$;/ = 7?@ > 7= 7 %! "$!"#$%&#%'(%%)*#$%&#%'(%#++#,-."/-0-1222"/-0-1
Διαβάστε περισσότεραSpecification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)
High CV-value Long Life > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life Optimized designs available on request RoHS Compliant application Basic design Smoothing, energy storage,
Διαβάστε περισσότεραThe Nottingham eprints service makes this work by researchers of the University of Nottingham available open access under the following conditions.
Luevorasirikul, Kanokrat (2007) Body image and weight management: young people, internet advertisements and pharmacists. PhD thesis, University of Nottingham. Access from the University of Nottingham repository:
Διαβάστε περισσότεραRJJ Miniature Aluminum Electrolytic Capacitors RJJ. Series RJJ High-Frequency, Low Impedance, Standard Type. Radial Type
352 Elna Corrections 80-95 /6/98 :55 AM Page Miniature Aluminum Electrolytic Capacitors Series High-Frequency, Low Impedance, Standard Type For high reliability applications, Environmentally safe. High-frequency,
Διαβάστε περισσότεραCSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Διαβάστε περισσότεραZNR Transient/Surge Absorbers (Type D)
ZNR Transient/Surge Absorbers Type: Series: V Features arge withstanding surge current capability in compact sizes arge Energy andling Capability absorbing transient overvoltages in compact sizes ide range
Διαβάστε περισσότεραPrecision Metal Film Fixed Resistor Axial Leaded
Features EIA standard colour-coding Non-Flame type available Low noise and voltage coefficient Low temperature coefficient range Wide precision range in small package Too low or too high ohmic value can
Διαβάστε περισσότεραSmaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
Διαβάστε περισσότεραTerminal Contact UL Insulation Designation (provided with) style form system approval Flux tight
eatures A miniature PCB Power Relay. form A contact configuration with quick terminal type. 5KV dielectric strength, K surge voltage between coils to contact. Ideal for high rating Home Appliances of heating
Διαβάστε περισσότεραNMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
Διαβάστε περισσότεραBulletin 1489 UL489 Circuit Breakers
Bulletin 489 UL489 Circuit Breakers Tech Data 489-A Standard AC Circuit Breaker 489-D DC Circuit Breaker 489-A, AC Circuit Breakers 489-D, DC Circuit Breakers Bulletin 489-A Industrial Circuit Breaker
Διαβάστε περισσότεραAluminum Capacitors C, Tubular, Radial Lead
Aluminum Capacitors + 105 C, Tubular, Radial Lead FEATURES Wide temperature range Radial design in two and three lead configuration Ideal SMPS output filter PERFORMANCE CHARACTERISTICS Operating Temperature:
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Διαβάστε περισσότεραAluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
Διαβάστε περισσότεραReturn Line Filters Type RTF10/25
Technical Data Type RTF1/25 Product Description Technical Data Construction Materials Filter head: Sealings: Aluminum NR (una-n ) Other sealing materials on request Options and Accessories Valve Clogging
Διαβάστε περισσότεραNTC thermistors for temperature measurement
NTC thermistors for temperature measurement SMD NTC thermistors with nickel barrier termination, case size 0603 Series/Type: Date: June 2008 EPCOS AG 2008. Reproduction, publication and dissemination of
Διαβάστε περισσότεραHSB Series. 1. Specifications DIN VDE 0110 Concerning clearance and creepage distances DIN VDE 0627 Connectors and plug devices
HSB Series 1. Specifications DIN VDE 0110 Concerning clearance and creepage distances DIN VDE 0627 Connectors and plug devices 2. Standards DIN EN 60 664-1 DIN EN 61 984 3. Approvals 169 All specifications
Διαβάστε περισσότεραΑ ιθ EL. 3. Κα ασ ασ ής: fischerwerke GmbH & Co. KG, Klaus-Fischer-Straße 1, Waldachtal, α ία. Tumlingen,
Η ΩΣΗ ΠΙ ΟΣ Ω Α ιθ. 0020 EL 1. Μο α ι ός ω ι ός α ο οί σ ς ο ύ ο ο οϊό ος: fischer η ώ α ο ώ α ύ ιο FH II, FH II-I 2. Π οβ ό - ς χ ήσ - ις : Π οϊό Α ύ ιο ιασ ο ής χό ς α ό ο ι έ η/ ς ήση/ ις ω σ έ ω σ
Διαβάστε περισσότερα2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Διαβάστε περισσότεραData sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Διαβάστε περισσότεραFeatures. Terminal Contact Enclosure style style form Open type Dust cover Ears on cover Antirotation-tab Ears on top
SONG CHUN Features 20/2 general purpose Power Relays. SPDT, DPDT, TPDT contact configurations. DC & C coils are both available. Optional for flange covers, tapped core w/anti-rotation tab, indicator lamp,
Διαβάστε περισσότερα+85 C Screw Terminal Aluminum Electrolytic Capacitors. For filtering applications. Capacitance change Dissipation factor Leakage current
For filtering applications FEATURES High ripple current High reiability range: 270µF to 680,000µF Voltage range: 6.3 to 450 SPECIFICATIONS Tolerance ±20% at 120 Hz, 25 C Operating Temperature Range Dissipation
Διαβάστε περισσότερα2013 REV 01 ELECTRONICS CAPACITORS. DC Applications Metallized Polypropylene Film Self Healing
2013 REV 01 POWER EECTRONICS CAPACITORS C Applications Metallized Polypropylene Film Healing OUR MISSION: POWER EECTRONICS AN SPECIA CAPACITORS M.V. PFC CAPACITORS AN BANKS IGHTING CAPACITORS MOTOR RUN
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Διαβάστε περισσότεραS /5000 BTU/Hr. 1000/1500 Watt
763.576.32 SPEC-168 D763.422.2211 COOLING SEALED ENCLOSURE COOLING AIR CONDITIONERS Sealed Enclosure Cooling Air Conditioners SPECTRACOOL SLIM FIT INDOOR S6 1/17 BTU/Hr. 3/5 Watt S1 34/5 BTU/Hr. 1/15 Watt
Διαβάστε περισσότεραAluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Διαβάστε περισσότεραFinite Field Problems: Solutions
Finite Field Problems: Solutions 1. Let f = x 2 +1 Z 11 [x] and let F = Z 11 [x]/(f), a field. Let Solution: F =11 2 = 121, so F = 121 1 = 120. The possible orders are the divisors of 120. Solution: The
Διαβάστε περισσότεραAccu-Guard II. SMD Thin-Film Fuse ELECTRICAL SPECIFICATIONS
Accu-Guard II is a version of Accu-Guard fuses for a wider range of current and voltage ratings. Con struct ed on alumina substrates, Accu-Guard II fuses display superior electrical, mechanical and en
Διαβάστε περισσότεραNTC Thermistor:TSM type
Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended
Διαβάστε περισσότεραThin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Διαβάστε περισσότεραΕργαστήριο Ανάπτυξης Εφαρμογών Βάσεων Δεδομένων. Εξάμηνο 7 ο
Εργαστήριο Ανάπτυξης Εφαρμογών Βάσεων Δεδομένων Εξάμηνο 7 ο Procedures and Functions Stored procedures and functions are named blocks of code that enable you to group and organize a series of SQL and PL/SQL
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
Διαβάστε περισσότεραGearmotor Data. SERIES GM9000: We have the GM9434H187-R1
SERIES GM9: We have the GM9434H187-R1 Gearmotor Data Item Parameter Symbol Units 5.9:1 11.5:1 19.7:1 38.3:1 65.5:1 127.8:1 218.4:1 425.9:1 728.1:1 1419.8:1 2426.9:1 4732.5:1 1 Max. Load Standard Gears
Διαβάστε περισσότεραCHAPTER 25 SOLVING EQUATIONS BY ITERATIVE METHODS
CHAPTER 5 SOLVING EQUATIONS BY ITERATIVE METHODS EXERCISE 104 Page 8 1. Find the positive root of the equation x + 3x 5 = 0, correct to 3 significant figures, using the method of bisection. Let f(x) =
Διαβάστε περισσότεραMultilayer Chip Capacitors C0G/NP0/CH
Multilayer Chip Capacitors C0G/NP0/CH Features Good thermal stability High insulation resistance Low dissipation factor Low inductance Applications Resonant circuits Filter circuits Timing elements Coupling
Διαβάστε περισσότεραELWOOD HIGH PERFORMANCE MOTORS H-SERIES MOTOR DATA
H-SERIES MOTOR DATA MOTOR MODEL H-3007 H-3016 H-4030-P H-4030-M H-4040 H-4050 H-4075 H-6100 H-6200 H-6300 MECHANICAL DATA (1) Rated Torque, Cont (Stall) 0.8 2.3 3.4 3.4 5.0 6.8 10.2 11.3 22.6 36.7 lb-in
Διαβάστε περισσότεραPolymer PTC Resettable Fuse: KMC Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. IA size: 0603, 0805, 1206, 1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small
Διαβάστε περισσότεραTIME SWITCHES AND TWILIGHT SWITCHES
W ANALOG DIN-RAIL TIME SWITCH QUARTZ, SERIES TEMPUS ANALOG 244 W SCHRACK-INFO Analogue time switch 1 channel Daily program With power reserve (NiMH rechargeable battery) Synchronised with mains Shortest
Διαβάστε περισσότεραSunlord Specifications subject to change without notice. Please check our website for latest information. Revised 2018/04/15
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Διαβάστε περισσότεραSunlord. Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) 2R2 SPH
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Διαβάστε περισσότεραMetal Oxide Varistor (MOV) Data Sheet
Metal Oxide (MOV) Data Sheet Feature Wide operating voltage range from 82V to 1100V Operating Temperature: -40 ~ +125 Storage Temperature: 15 ~35 Applications The over-voltage protection for transistors,
Διαβάστε περισσότεραMSN DESK TOP ENCLOSURE WITH STAND / CARRYING HANDLE
MSN SERIES MSN DESK TOP ENCLOSURE WITH STAND / CARRYING HANDLE W H FEATURE Available in 176 sizes. Stand / carrying handle can be adjusted in 30 degree. Maximum load is kg. There are no ventilation hole
Διαβάστε περισσότεραSummary of Specifications
Snap Mount Large High CV High Ripple 85 C Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life for the series is 2,000 hours
Διαβάστε περισσότεραLR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Διαβάστε περισσότεραGAUGE BLOCKS. Grade 0 Tolerance for the variation in length. Limit deviation of length. ± 0.25μm. 0.14μm ±0.80μm. ± 1.90μm. ± 0.40μm. ± 1.
GAUGE BLOCKS Accuracy according to ISO650 Nominal length (mm) Limit deviation of length Grade 0 Tolerance for the variation in length Grade Grade Grade Grade 2 Limit deviations of Tolerance for the Limit
Διαβάστε περισσότεραAT Surface Mount Package SOT-363 (SC-70) I I Y. Pin Connections B 1 C 1 E 1 E 2 C 2 B , 7:56 PM
AT-3263 Surface Mount Package SOT-363 (SC-7) I I Y Pin Connections B 1 C 1 E 1 E 2 C 2 B 2 Page 1 21.4., 7:6 PM Absolute Maximum Ratings [1] Absolute Thermal Resistance [2] : Symbol Parameter Units Maximum
Διαβάστε περισσότεραTechnical Data for Profiles. α ( C) = 250 N/mm 2 (36,000 lb./in. 2 ) = 200 N/mm 2 (29,000 lb./in 2 ) A 5 = 10% A 10 = 8%
91 500 201 0/11 Aluminum raming Linear Motion and Assembly Technologies 1 Section : Engineering Data and Speciications Technical Data or Proiles Metric U.S. Equivalent Material designation according to
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
Διαβάστε περισσότεραMZ0.5GN SERIES ZENER DIODE TECHHICAL SPECIFICATION FEATURES. ABSOLUTE MAXIMUM RATINGE: (Ta=25 ) Parameter Symbols Limits Unit
MZ.GEV- THRU MZ.GEV-. MZ.GN SERIES MZ.GEV THRU MZ.GEV TECHHICAL SPECIFICATION FEATURES Silicon Planar Power Diodes The zener voltages are graded according to the International E standard smaller voltage
Διαβάστε περισσότεραSMD Power chokes- SPD Series SPD series chokes For High Current Use
SMD Power chokes- SPD Series SPD series chokes For High Current Use Features 1.Shielded construction. 2.High current rating up to DC Amp 3.High frequency range up to 5.MHz 4.Ultra low buzz noise, due to
Διαβάστε περισσότεραFirst Sensor Quad APD Data Sheet Part Description QA TO Order #
Responsivity (/W) First Sensor Quad PD Data Sheet Features Description pplication Pulsed 16 nm laser detection RoHS 211/65/EU Light source positioning Laser alignment ø mm total active area Segmented in
Διαβάστε περισσότεραElectrical Specifications at T AMB =25 C DC VOLTS (V) MAXIMUM POWER (dbm) DYNAMIC RANGE IP3 (dbm) (db) Output (1 db Comp.) at 2 f U. Typ.
Surface Mount Monolithic Amplifiers High Directivity, 50Ω, 0.5 to 5.9 GHz Features 3V & 5V operation micro-miniature size.1"x.1" no external biasing circuit required internal DC blocking at RF input &
Διαβάστε περισσότεραEE512: Error Control Coding
EE512: Error Control Coding Solution for Assignment on Finite Fields February 16, 2007 1. (a) Addition and Multiplication tables for GF (5) and GF (7) are shown in Tables 1 and 2. + 0 1 2 3 4 0 0 1 2 3
Διαβάστε περισσότεραRS306 High Speed Fuse for Semiconductor Protection
Product Information Standard square body fuse, comply with GB13539/IEC60269/UL-248/VDE-0636 Protection: ar (GB\IEC), short circuit or backup Rated : 250-4000VAC Very low I 2 t/high current-limiting/high
Διαβάστε περισσότεραShape Square. Tolerance of Varistor Voltage For Varistor voltage<68, Special For Varistor voltage 68, 10% Lead Wire Type Straight Cut Lead
Leaded Varistor for urge uppression VP eries Operating Temp. : -40 ~ +85 FEATURE Fast response Excellent clamping ratio, high peak current and pulse energy withstanding characteristics, providing strong
Διαβάστε περισσότεραQUICKTRONIC PROFESSIONAL QTP5
osram.com QUICKTRONIC PROFESSIONA QTP5 ECG for T5/ 16mm, T8/ 26mm, DUUX fluorescent lamps QTP5 i.e. UMIUX T5 HO ES 01 Product Features: Up to 100.000 hours lifetime 1 amp start with optimized filament
Διαβάστε περισσότεραVentilated Distribution Transformers
General Purpose Energy efficient dry-type transformers 600 Volt Class, isolation type, single and three phase, 1 through 00. Indoor and outdoor models available. Accessories and Optional Styles trostatic
Διαβάστε περισσότεραPolymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
Διαβάστε περισσότεραDigital motor protection relays
Digital motor protection relays Specification DMP -S & DMP -Sa DMP -T & DMP -Ta Model No. DMP06-S/Sa DMP60-S/Sa DMP06-T/Ta DMP60-T/Ta Wiring Screw type Tunnel type Panel mount Unit or Extension Note1)
Διαβάστε περισσότεραPRODUCT IDENTIFICATION SWPA 3012 S 1R0 N T
Wire Wound SMD Power Inductors SWPA Series Operating temperature range: -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded conruction reduces buzz noise to ultra-low levels Metallization
Διαβάστε περισσότεραUnshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
Διαβάστε περισσότεραNTC Thermistor:SCK Series
Features. RoHS & HF compliant 2. Body size: Ф5mm ~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70
Διαβάστε περισσότεραApproximation of distance between locations on earth given by latitude and longitude
Approximation of distance between locations on earth given by latitude and longitude Jan Behrens 2012-12-31 In this paper we shall provide a method to approximate distances between two points on earth
Διαβάστε περισσότεραSHRINK TUNNEL. uline.com TUNNEL ASSEMBLY
TUNNEL ASSEMBLY 27 3 28 1 2 8 23 28 21 30 2 30 3 3 2 1 2 0 17 1 17 7 13 0 2 31 1 18 2 0 3 3 3 38 3 1 PAGE 1 OF 8 TUNNEL ASSEMBLY PARTS LIST 1 Base Frame 1 ------------ C0 2 Tunnel Hood Frame 1 ------------
Διαβάστε περισσότεραSC Style Optical Connector
SC Style Optical Connector OUTLINE SC connector is a push/pull style connector developed by NTT. The square, snap-in connector latches with a simple push-pull motion and is keyed. It is frequently used
Διαβάστε περισσότεραTrimmable Thick Film Chip Resistor
rimmable hick ilm Chip Resistor R Series rimmable hick ilm Chip Resistor Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. eatures
Διαβάστε περισσότεραTTX400 TL5, TMX400 electrical units
Lighting TTX400 TL5, TMX400 electrical units TMX400 1xTL5-80W HFP TTX400-1 pc - TL5-80 W - HF Performer These electrical units are designed for quick click mounting in TTX400 trunking sections. They are
Διαβάστε περισσότεραIEC Type Fuseholders DF6 and GK1
IEC Type Fuseholders DF6 and GK1 Class 900 CONTENTS Schneider Electric Brands Description Page Application Data..................................................... Fuseholders........................................................
Διαβάστε περισσότεραMIL-C-5015 Connector Series
ircular onnector --5015 onnector eries K15-228- type connector K15-228- series circular connectors are used extensively in line connections between electrical equipment,various instruments and meters.
Διαβάστε περισσότεραTTX400 TL5, TMX400 electrical units
Lighting TTX400 TL5, TMX400 electrical units TMX400 2xTL5-35W HFP TTX400-2 pcs - TL5-35 W - HF Performer These electrical units are designed for quick click mounting in TTX400 trunking sections. They are
Διαβάστε περισσότεραMath 6 SL Probability Distributions Practice Test Mark Scheme
Math 6 SL Probability Distributions Practice Test Mark Scheme. (a) Note: Award A for vertical line to right of mean, A for shading to right of their vertical line. AA N (b) evidence of recognizing symmetry
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Διαβάστε περισσότεραISM 868 MHz Ceramic Antenna Ground cleared under antenna, clearance area mm x 8.25 mm. Pulse Part Number: W3013
W0 Datasheet version.. Ceramic Antenna. (0/08). Ceramic Antenna Ground cleared under antenna, clearance area 0.80 mm x 8.5 mm. Pulse Part Number: W0 Features - Omni directional radiation - Low profile
Διαβάστε περισσότερα