Τιμοκατάλογος Σιδηροσωλήνων

Transcript

1 1

2 4

3 Τιμοκατάλογος Σιδηροσωλήνων Σωλήνα γαλβανιζέ ραφής με αυλακωτά άκρα ή σπείρωμα Galvanised arbon Steel Welded Pipes (Grooved or SP threads) ΓΑΛΒΑΝΙΖΕ ΟΝΟΜΑΣΤΙΚΗ ΔΙΑΜΕΤΡΟΣ ΚΟΙΝΟΙ ΕΜΠΟΡΙΟΥ ΚΙΤΡΙΝΗ ΕΤΙΚΕΤΑ ΠΑΧΟΣ () ΤΙΜΗ ( ) ISO I ΚΟΚΚΙΝΗ ΕΤΙΚΕΤΑ ΠΑΧΟΣ () ΤΙΜΗ ( ) ΕΝ ΠΡΑΣΙΝΗ ΕΤΙΚΕΤΑ ΠΑΧΟΣ () ½ ,30-2,60 - ¾ 2,00-2,30-2,60-1'' 2,20-2,90-3,20-1 ¼ '' 2,30-2,90-3,20-1 ½ 2,40-2,90-3,20-2'' 2, ½ 2, ,60-3'' '' 3, ,50-5'' - - 4, ,50-6'' - - 4, ,50-8'' - - 4, ,50 - ΤΙΜΗ ( ) ΜΑΥΡΗ ΟΝΟΜΑΣΤΙΚΗ ΔΙΑΜΕΤΡΟΣ ΚΟΙΝΟΙ ΕΜΠΟΡΙΟΥ ΚΙΤΡΙΝΗ ΕΤΙΚΕΤΑ ΠΑΧΟΣ () ΤΙΜΗ ( ) ISO I ΚΟΚΚΙΝΗ ΕΤΙΚΕΤΑ ΠΑΧΟΣ () ΤΙΜΗ ( ) ΕΝ ΠΡΑΣΙΝΗ ΕΤΙΚΕΤΑ ΠΑΧΟΣ () ½ ,30-2,60 - ¾ 2,00-2,30-2,60-1'' 2,20-2,90-3,20-1 ¼ 2,30-2,90-3,20-1 ½ 2,40-2,90-3,20-2'' 2, ½ 2, '' '' 3, ,50 - ΤΙΜΗ ( ) 5'' - 4,00 * 4,50 * 6'' - 4,00 * 4,50 * 8'' - 4,50 * 5,50 * Σωλήνα μαύρη ραφής με αυλακωτά άκρα ή σπείρωμα lack arbon Steel Pipe (Grooved or SP threads) * Τιμολογούνται κατόπιν απαίτησης - Price upon request

4 Βιδωτά Εξαρτήματα Ευρώπης Screwed Fittings ΣΧΗΜΑ ΤΥΠΟΣ ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ 3 4 Γωνιές θηλυκές Μαύρα 0,77 1,22 1,83 3,57 5,89 6,82 21,26 29,09 51,35 Γαλβα/μένα 0,97 1,54 2,27 4,47 7,31 8,57 26,51 36,35 64,12 Γωνιές αρσενικές θηλυκές Μαύρα 0,89 1,46 2,40 4,26 6,42 8,37 21,91 28,87 48,55 Γαλβα/μένα 1,14 1,79 3,01 5,24 7,96 10,52 27,38 36,43 64,19 Ταυ Μαύρα 1,10 1,83 2,68 5,55 7,68 10,80 25,89 34,69 69,45 Γαλβα/μένα 1,34 2,27 3,41 6,09 9,54 13,48 32,41 43,90 83,50 Ταυ Συστολικά Μαύρα 2,44 4,75 7,60 11,01 13,24 28,06 40,76 73,43 Γαλβα/μένα 3,09 5,66 9,46 13,73 16,49 34,25 48,66 92,44 Σταυροί Μαύρα 3,75 5,80 7,33 9,79 13,01 19,45 47,98 53,94 88,42 Γαλβα/μένα 4,78 7,09 9,15 12,21 16,23 23,75 57,20 65,80 109,60 Σταυροί Συστολικοί Μαύρα 8,13 10,95 12,21 15,99 22,33 Γαλβα/μένα 9,89 13,20 14,67 17,19 24,86 Μούφες Μαύρα 0,89 1,25 1,58 2,56 3,57 5,48 16,40 19,68 45,31 Γαλβα/μένα 1,15 1,55 1,99 3,26 4,55 6,86 20,47 24,58 56,56 Μούφες αρσενικές θηλυκές Μαύρα 1,44 1,86 2,46 4,79 5,26 9,06 16,87 19,68 49,94 Γαλβα/μένα 1,78 2,37 3,09 5,98 6,57 11,82 20,82 25,76 62,20 Ρακόρ θηλυκά Μαύρα 5,04 5,10 5,76 9,54 11,19 18,44 41,25 57,56 116,30 Γαλβα/μένα 7,21 6,40 7,21 11,95 13,99 23,06 51,61 71,95 145,39 Ρακόρ αρσενικά θηλυκά Μαύρα 5,15 5,25 6,44 10,26 13,05 20,43 45,40 70,96 130,82 Γαλβα/μένα 6,35 6, ,80 16,32 25,51 56,34 88,05 163,55

5 Βιδωτά Εξαρτήματα Ευρώπης Screwed Fittings ΣΧΗΜΑ ΤΥΠΟΣ ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ 3 4 Συστολές Αγγλίας Μαύρα 2,26 1,65 2,03 3,80 5,92 8,53 23,65 36,16 59,02 Γαλβα/μένα 2,73 1,99 2,50 4,85 7,40 10,60 28,30 42,98 69,77 Συστολές Αμερικής Μαύρα 1,40 0,94 1,22 2,15 3,01 5,48 10,80 14,61 29,66 Γαλβα/μένα 1,64 1,18 1,55 2,60 3,70 6,86 13,21 18,28 36,75 Τάπες Αρσενικές Μαύρα 0,70 0,90 1,02 1,75 2,82 3,98 9,05 11,69 36,92 Γαλβα/μένα 0,81 1,06 1,22 2,19 3,26 5,00 11,24 14,52 43,40 Τάπες Θηλυκές Μαύρα 1,02 1,22 1,53 2,33 2,88 5,34 9,97 12,00 26,35 Γαλβα/μένα 1,27 1,54 1,86 2,88 3,60 6,38 12,51 14,85 32,90 Μαστοί Εξάγωνοι Μαύρα 0,81 1,10 1,50 2,56 3,05 5,48 10,32 12,51 45,31 Γαλβα/μένα 1,02 1,34 1,91 3,25 3,74 6,86 12,90 15,57 56,56 Μαστοί Συστολικοί Μαύρα 2,52 1,83 3,39 5,69 7,90 8,89 23,07 35,74 Γαλβα/μένα 3,14 2,16 4,25 6,69 9,77 10,54 27,47 42,55 Μούφες μέσα έξω βόλτα Μαύρα 1,66 2,39 3,84 5,58 Γαλβα/μένα 2,08 3,04 4,69 6,86 Ρακόρ γωνιακά θηλυκά Μαύρα 5,40 6,25 9,10 16,32 19,13 32,66 Γαλβα/μένα 6,88 7,94 11,33 20,10 23,62 39,88 Ρακόρ γωνιακά αρσενικά Μαύρα 5,74 6,95 9,69 17,10 19,60 32,98 Γαλβα/μένα 6,97 8,65 11,90 20,34 24,45 41,30 Γωνιές συστολικές Μαύρα 2,48 2,44 2,84 5,90 7,54 12,27 35,33 50,33 Γαλβα/μένα 3,13 2,20 3,29 7,13 9,16 15,20 40,91 59,93

6 couplings section 3: couplings FireLock EZ Rigid oupling Style 009H For omplete Information Request Publication Provides rigidity; does not accoodate expansion, contraction or angular deflection Installation-ready design assemble a joint without disassembling the bolts, nuts, gasket and housings For use in fire protection systems only Reduces installation time up to 60% vailable with hot dipped galvanized finish Proprietary gasket design Rated up to 365 psi/2517 kpa see submittal publication for complete performance ratings s from 1¼ 4"/ E RT I F I T E RT I F I T nominal inches actual outside dia. inches max. work. press. * psi kpa max. end load * Nbs. n allow. pipe end Sep. bolt/nut no. inches pre-assembled (Stab in condition) dimensions inches/ Joint assembled X Y X Y Z aprx. wgt. ea. 1 1/ /8 x M10 x ½ /8 x M10 x /8 x M10 x ½ /8 x 2 ½ M10 x 2 ½ /8 x 2 ½ M10 x 2 ½ /8 x 2 ½ M10 x 2 ½ /8 x 2 ½ M10 x 2 ½ * Working Pressure and End Load are total, from all internal and external loads, based on standard weight (NSI) steel pipe, standard roll or cut grooved in accordance with Victaulic specifications. See page 1 of this document for Listed/pproved ratings on other pipe. WRNING: FOR ONE TIME FIELD TEST ONLY, the Maximum Joint Working Pressure may be increased to 1 1/2 times the figures shown in the chart on page 1, specific to pipe schedule and size. The allowable pipe separation dimension shown is for system layout purposes only. FireLock EZ couplings are considered rigid connections and will not accoodate expansion or contraction of the piping Number of bolts required equals number of housing segments. IMPortant notes: When assembling FireLock EZ couplings onto end caps, take additional care to make certain the end cap is fully seated against the gasket end stop. For FireLock EZ Style 009H couplings, use FireLock No. 006 end caps containing the EZ marking on the inside face or No. 60 end caps containing the QV EZ marking on the inside face. Non-Victaulic end cap products should not be used with Style 009H couplings. Y X pre-assembled Z Y X installed Z lbs. 3-3

7 couplings FireLock Rigid oupling Style 005 For omplete Information Request Publication E RT I F I T E RT I F I T Unique angle-pad design for rigidity VNIIPO llows supporting/ hanging same as welded or threaded in accordance with NFP-13 requirements For use in fire protection services only vailable with hot dipped galvanized finish Pressure rated up to 350 psi/2410 kpa s from 1¼ 8"/ nominal inches actual outside dia. inches max. work pressure * psi kpa max. end load * Nbs. n allow. pipe end Sep. * dimensions inches/ inches X Y Z approx. wgt. each 1 1/ / / ** ** For field installation only. FireLock Style 005 couplings are essentially rigid and do not accoodate expansion/contraction. Style 005 couplings are VdS and LP pproved to 12 ar/175 psi. * Refer to General Notes on pg ** Korea MPI pproved Y X Z lbs. section 3: couplings sypical For all SiZeS 3-4

8 ouplings section 3: ouplings Zero-Flex Rigid oupling Style 07 For omplete Information Request Publication E RT I F I T E RT I F I T ngled-pad design for rigidity Resists flexural and torsional loads VNIIPO Pressure rated up to 500 psi/3450 kpa s from 1 12"/ ctual Outside Dia. Max. Work Pressure psi kpa Max. End Load * N llow. Pipe End Sep. * Dimensions / X Y Z Wgt. Each / / / ** ** #@ #@ Pressure ratings for Victaulic couplings used in services other than fire protection will differ from the ratings published here. Please consult the individual product submittal for specific pressure rating information. * Refer to General Notes on pg # ouplings in 8"/200, 10"/250 and 12"/300 sizes are approved for JIS piping Only couplings in 10"/250 and 12"/300 sizes are approved for use in hina ** Korea MPI pproved Y Z X Typical for all sizes 3-5

9 ouplings Standard Flexible oupling Style 77 For omplete Information Request Publication E RT I F I T E RT I F I T VNIIPO ross-ribbed construction design Provides flexibility for expansion, contraction, and deflection Pressure rated up to 500 psi/3450 kpa s from ¾ 12"/ ctual Outside Dia. Max. Work Pressure psi kpa Max. End Load * N llow. Pipe End Sep. * Dimensions / X Y Z Wgt. Each 3/ , ,000 1, / ,000 2, / ,000 2, ,000 4, / ,000 6, ,000 7, ,000 9, ** ,000 15, ,000 14, ,000 24, ,000 21, ,000 23, ,000 34, ,000 30, ,000 33, # , # , # , Pressure ratings for Victaulic couplings used in services other than fire protection will differ from the ratings published here. Please consult the individual product submittal for specific pressure rating information. * Refer to General Notes on pg # ouplings in 8"/200, 10"/250 and 12"/300 sizes are approved for JIS piping standards ** Korea MPI pproved section 3: ouplings Y Z X Typical for all sizes 3-6

10 ouplings section 3: ouplings Flexible oupling Style 75 For omplete Information Request Publication E RT I F I T E RT I F I T VNIIPO For use where moderate pressures are expected and weight considerations are flexibility factors 50% lighter in weight than Style 77 Pressure rated up to 500 psi/3450 kpa s from 1 8"/ ctual Outside Dia. Max. Work Pressure * psi kpa Max. End Load * N llow. Pipe End Sep. * Dimensions / X Y Z Wgt. Each / , / , , / , , , / , ** , , , , , , , , , , ** , * Refer to General Notes on pg ** Korea MPI pproved Y Z X Typical for all s 3-7

11 RON STEEL PIPE GROOVED OUPLINGS QuickVic Rigid oupling for Steel STYLE DIMENSIONS Y X STYLE 107 PRE-SSEMLED (INSTLLTION-REDY ONDITION) Y X STYLE 107 JOINT SSEMLED Z Z / ctual Outside Diameter / llow. Pipe End olt/nut Dimensions / / No. - / Pre-assembled (Installation-ready condition) Joint ssembled X Y X Y Z prx. Wgt. Ea M12 1/2 x x / M12 1/2 x x M12 x M12 1/2 x x M12 1/2 x x M16 x 3 1/ /8 x 3 1/ M16 x 3 1/ /8 x 3 1/ M16 x 3 1/ /8 M16 x x The allowable pipe separation dimension shown is for system layout purposes only. Style 107 QuickVic rigid couplings are considered rigid connections and will not accoodate expansion or contraction of the piping Number of bolts required equals number of housing segments. WRNING: Depressurize and drain the piping system before attempting to install, remove or adjust any Victaulic piping products. / VITULI IS REGISTERED TRDEMRK OF VITULI OMPNY VITULI OMPNY. LL RIGHTS RESERVED _2 REV_D

12 IPS RON STEEL PIPE PLIN END SYSTEM Roust--out ouplings STYLE SEE VITULI PULITION FOR DETILS Style 99 Roust--out couplings are designed with heavy housings and grips to provide a strong component for joining plain and beveled end, including Schedule 80 steel pipe and Victaulic plain end fittings. Roust--out couplings are not designed for use on plastic pipe, pipe with brittle linings, cast or ductile iron pipe nor any pipe with a surface hardness greater than 150 rinell. Pipe is secured together by heavy jaws, which are set into the housing. ll sizes are supplied with painted housings and plated nuts and bolts. Galvanized housings are available. WRNING Style 99 Roust--out couplings must be assembled with nuts tightened to full torque specifications. 1 ½ 12'' SIZES 14 18'' SIZES Exaggerated for clarity Exaggerated for clarity 1 ½ 18'' SIZES 1''; 76.1 & MM SIZES MTERIL SPEIFITIONS Housing: Ductile iron conforming to STM -536, grade Ductile iron conforming to STM -395, grade , is available upon special request. Housing oating: Orange enamel. Optional: Hot dipped galvanized and others. Jaws: arbon steel, case hardened, electroplated, except sizes 1''; 76.1 and 139.7, which utilize stainless steel, Type 416, hardened. Gasket: (specify choice*) Grade E EPDM EPDM (Green color code). Temperature range 30 F to +230 F/ 34 to Recoended for cold and hot water service within the specified temperature range plus a variety of dilute acids, oil-free air and many chemical services. UL classified in accordance with NSI/NSF 61 for cold +86 F/+30 and hot +180 F/+82 potable water service. NOT REOMMENDED FOR PETROLEUM SERVIES. Grade T nitrile Nitrile (Orange color code). Temperature range 20 F to +180 F/ 29 to +82. Recoended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. Not recoended for hot water services over +150 F/+66 or for hot dry air over +140 F/+60. * Services listed are General Service Recoendations only. It should be noted that there are services for which these gaskets are not recoended. Reference should always be made to the latest Victaulic Gasket Selection Guide for specific gasket service recoendations and for a listing of services which are not recoended. olts/nuts/washers: Heat-treated plated carbon steel, trackhead meeting the physical and chemical requirements of STM -449 and physical requirements of STM The 6"/150 and larger sizes are supplied with hardened steel washers meeting STM F-436 Type 3 (weathering steel). JO/OWNER ONTRTOR ENGINEER System No. Submitted y Spec Sect Para Location Date pproved Date VITULI IS REGISTERED TRDEMRK OF VITULI OMPNY VITULI OMPNY. LL RIGHTS RESERVED. PRINTED IN THE US. REV_H 14.02_1

13 IPS RON STEEL PIPE PLIN END SYSTEM Roust--out ouplings STYLE DIMENSIONS Y Z X 1 6"/ MM SIZES Y Z X 8 12"/ MM SIZES Y Z X 14 18"/ MM SIZES ctual Outside Diameter Max Work Press. psi kpa Max. End Load * N Required olt Torque olt/nut No. Dimensions / Lb. Ft. ** N m X Y Z prx. Weight x ½ ½ x 2 ½ x 3 ¼ ½ x 3 ¼ ½ x 2 ¾ ¾ x 4 ¼ ½ ¾ x 4 ¼ ¾ x 4 ¼ ¾ x x x 6 # x 6 # x 5 # x 5 # x 6 ½ # x 6 ½ # x 6 ½ # x 6 ½ # * Working Pressure and End Load are total, from all internal and external loads, based on coupling properly assembled, with bolts fully torqued to listed specifications, on plain end or beveled end standard weight (NSI) steel pipe and Victaulic plain end fittings. ouplings are designed to be used with plain end pipe and Victaulic plain end fittings only. ** olt torque ratings shown must be applied at installation. Metric thread size bolts (plated) are available (color coded) for all coupling sizes upon request. ontact Victaulic for details. WRNING: Depressurize and drain the piping system before attempting to install, remove, or adjust any Victaulic piping products. # Supplied with flat washers. VITULI IS REGISTERED TRDEMRK OF VITULI OMPNY VITULI OMPNY. LL RIGHTS RESERVED. PRINTED IN THE US _2 REV_H

14 ouplings Reducing oupling Style 750 For omplete Information Request Publication E RT I F I T E RT I F I T Direct reduction on the piping run VNIIPO Designed to replace two couplings and a reducing fitting Special reducing gasket for pressure responsive sealing Pressure rated up to 350 psi/2410 kpa s from 2 1"/50 25 through 8 6"/ Max. Work Pressure * psi kpa Max. End Load * N llow. Pipe End Sep. * Dimensions / X Y Z Wgt. Each , / , / , , , / , , , / , , , , , , , , * Refer to General Notes on pg IMPORTNT NOTES: No. 60 ap is not for use in vacuum services with Style 72 or 750 couplings. No. 61 bull plug should be used. Y Z section 3: ouplings X Typical for all s 3-8

15 ouplings section 3: ouplings FireLock Flange dapter NSI lass 150 PN10 JIS 10K Style 744 For omplete Information Request Publication Directly incorporates NSI lass 150, PN10, JIS 10K or NSI lass 300, PN16, JIS 20K bolt hole patterns into a grooved system Hinged for easy handling with integral end tabs which facilitate assembly Small teeth inside the key shoulder inside diameter prevent rotation Pressure rated up to 175 psi/1200 kpa s from 2 8"/ ctual Outside Dia. Max. Work Pressure * psi kpa Max. End Load * N Max. Sealing Surface Min. W Dimensions Z Wgt. Each ½ * Working Pressure and End Load are total, from all internal and external loads, based on standard weight steel pipe, standard roll or cut grooved in accordance with Victaulic specification. ontact Victaulic for performance on other pipe. Important notes WRNING: For one time field test only, the Maximum Joint Working Pressure may be increased to 1½ times the figures shown. Style 744 FireLock Flange adapters provide rigid joints when used on pipe with standard roll or cut groove dimensions and consequently allow no linear or angular movement at the joint. WRNING: Depressurize and drain the piping system before attempting to install, remove, or adjust any Victaulic piping products. Style 744 FireLock Flange adapters provide rigid joints when used on pipe with standard cut or roll groove dimensions and consequently allow no linear or angular movement at the joint. When used with Victaulic Series 765/705W/707 butterfly valves, plastic pipe or lightwall metallic pipe, small teeth in inside diameter of key section should be removed and may be used on one side of the valve. Z W Remove to mate to flat-faced flanges W Style 744 and style 741 Typical for all s style 743 Z Typical for all s Orange area of mating face must be free from gouges, undulations or deformities of any type for effective sealing. 3-9

16 ouplings Vic-Flange dapter NSI lass 300 PN16 JIS 20K Style 741 For omplete Information Request Publication Vic-Flange dapter NSI lass 300 PN16 JIS 20K Style 743 For omplete Information Request Publication E RT I F I T E RT I F I T Directly incorporates NSI lass 150 PN10 JIS 10K or NSI lass 300 PN16 JIS 20K flanged components into a grooved system Pressure rated up to 250 psi/1725 kpa s from 2 12"/ (hinged) Pressure rated up to 500 psi/3450 kpa s from 2 12"/ ctual Outside Dia. Max. Work Pressure * psi kpa Max. End Load * N Max. Sealing Surface Min. W Dimensions Z Wgt. Each , / , , , , , , , , , * Refer to Publication for more details. IMPORTNT NOTES: Style 741 Vic-Flange adapters provide rigid joints when used on pipe with standard cut or roll groove dimensions and consequently allow no linear or angular movement at the joint. When used with Victaulic Series 765/705W/707 butterfly valves, plastic pipe or lightwall metallic pipe, small teeth in I.D. of key section should be removed and may be used on one side of the valve. Total bolts required to be supplied by installer, may be ordered from Victaulic ompany. For restrictions on where and how Vic-Flange adapters and flange washers can be used, refer to Publication ctual Outside Dia. Max. Work Pressure * psi kpa Max. End Load * N Max. Sealing Surface Min. W Dimensions Z Wgt. Each , / , , , , , , , , * Refer to Publication for more details. IMPORTNT NOTES: Style 743 Vic-Flange must be ordered as a factory assembly when connected to a Victaulic fitting or valve. ontact Victaulic for details. Total bolts required to be supplied by installer, may be ordered from Victaulic. For restrictions on where and how Vic-Flange adapters and flange washers can be used, refer to Publication section 3: ouplings 3-10

17 Fittings FireLock Elbows, Tee and ap No º Elbow no º Elbow no. 002 Straight Tee no. 006 ap For omplete Information Request Publication T E RT I F I T E RT I F I T VNIIPO No. 001* No. 003* No. 002* No. 006* ctual Outside Diameter No º Elbow Wgt. Each No º Elbow Wgt. Each No. 002 Straight Tee Wgt. Each T Thickness 1 1/ / / No. 006 ap Wgt. Each * See individual fitting submittals and publication for approvals. section 4: Fittings 4-2

18 RON STEEL PIPE - GROOVED FITTINGS Grooved End Fittings DIMENSIONS Elbows NO º Elbow NO º Elbow NO /2º Elbow NO /4º Elbow NO º Long Radius NO º Long Radius E to E to E NO. 10 NO. 11 NO. 12 NO. 13 NO. 100 NO. 110 ctual Outside Dia. No º Elbow Wgt. Each No º Elbow Wgt. Each No /2 Elbow Wgt. Each 1.38sw 3/ sw No ¼ Elbow Wgt. Each sw / sw / sw No Long Radius Elbow (S) Wgt. Each No Long Radius Elbow (S) Wgt. Each / / sw sw / sw sw sw sw sw Gooseneck design, end-to-end dimension fittings in this size, contact your nearest Victaulic sales office. hinese standard sizes Note: ll fittings are ductile iron unless otherwise noted with an sw or s. SW= Segmentally Welded. S= arbon Steel VITULI IS REGISTERED TRDEMRK OF VITULI OMPNY VITULI OMPNY. LL RIGHTS RESERVED _4 REV_P

19 TM RON STEEL PIPE - GROOVED FITTINGS Grooved End Fittings E to E to E NO. 10 NO. 11 NO. 12 NO. 13 NO. 100 NO. 110 ctual Outside Dia. No º Elbow Wgt. Each No º Elbow Wgt. Each No /2 Elbow Wgt. Each No ¼ Elbow Wgt. Each No Long Radius Elbow (S) Wgt. Each No Long Radius Elbow (S) # sw sw s s Wgt. Each 16 # sw sw s s # sw sw s s # sw sw s s # sw sw s s For GS fitting information, see publication Gooseneck design, end-to-end dimension # For roll grooved systems, Victaulic offers the dvanced Groove System (GS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. hinese standard sizes Note: ll fittings are ductile iron unless otherwise noted with an sw or s. SW= Segmentally Welded. S= arbon Steel VITULI IS REGISTERED TRDEMRK OF VITULI OMPNY VITULI OMPNY. LL RIGHTS RESERVED. REV_P 07.01_5

20 RON STEEL PIPE - GROOVED FITTINGS Grooved End Fittings Tees, rosses and True Wyes NO. 20 Tee NO. 35 ross NO. 33 True Wye NO. 29M Tee with Threaded ranch to E to LE to SE to TE to GE NO. 20 NO 35 NO. 33 NO. 29M ctual Outside Dia. No. 20 Tee Weight Each No. 35 ross (sw) Weight Each to LE No. 33 True Wye (sw) to SE Weight Each to GE No. 29M Tee with Threaded ranch to TE Weight Each 3/ / / / (sw) / (sw) (sw) / (sw) (sw) (sw) (sw) (sw) Note: ll fittings are ductile iron unless otherwise noted with an sw or s. SW= Segmentally Welded. S= arbon Steel VITULI IS REGISTERED TRDEMRK OF VITULI OMPNY VITULI OMPNY. LL RIGHTS RESERVED _8 REV_P

21 TM RON STEEL PIPE - GROOVED FITTINGS Grooved End Fittings Tees, rosses and True Wyes NO. 20 Tee NO. 35 ross NO. 33 True Wye NO. 29M Tee with Threaded ranch to E to LE to SE to TE to GE NO. 20 NO 35 NO. 33 NO. 29M ctual Outside Dia. No. 20 Tee Weight Each No. 35 ross (sw) Weight Each to LE No. 33 True Wye (sw) to SE Weight Each 14 # to GE No. 29M Tee with Threaded ranch to TE Weight Each 16 # # # # For GS fitting information, see publication # For roll grooved systems, Victaulic offers the dvanced Groove System (GS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. hinese standard sizes Note: ll fittings are ductile iron unless otherwise noted with an sw or s. SW= Segmentally Welded. S= arbon Steel IMPORTNT NOTE: Fittings size 26 48"/ are available roll grooved for installation with Style 770 large diameter pipe couplings, ontact Victaulic for details. VITULI IS REGISTERED TRDEMRK OF VITULI OMPNY VITULI OMPNY. LL RIGHTS RESERVED. REV_P 07.01_9

22 RON STEEL PIPE - GROOVED FITTINGS Grooved End Fittings Reducing Tee NO. 25 Grooved ranch NO. 29T Threaded ranch to E to E NO. 25 NO. 29 NO. 25 NO. 29T No. 25 Std. No. 29T w/ Thd. ranch Weight Each 1 1 3/ /4 1 1/ /2 1 1/2 3/ / / / / (sw) /2 2 1/2 3/ (sw) / / (sw) / / / (sw) (sw) / (sw) / No. 25 Std. No. 29T w/ Thd. ranch Weight Each / / / / (sw) 5.50 (sw) / (sw) (sw) (sw) / / TM For GS fitting information, see publication ontact Victaulic for details. Note: ll fittings are ductile iron unless otherwise noted with an sw or s. SW= Segmentally Welded. S= arbon Steel IMPORTNT NOTE: No. 29T Threaded Outlet Reducing Tees are supplied NPT and are available with ritish Standard threads. For ritish Standard specify "SP" clearly on order. VITULI IS REGISTERED TRDEMRK OF VITULI OMPNY VITULI OMPNY. LL RIGHTS RESERVED _10 REV_P

23 RON STEEL PIPE - GROOVED FITTINGS Grooved End Fittings Reducing Tee NO. 25 Grooved ranch NO. 29T Threaded ranch to E to E NO. 25 NO. 29T NO. 25 NO. 29T No. 25 Std. No. 29T w/ Thd. ranch Weight Each /2 6 1/ (sw) (sw) / (sw) 7.75 (sw) / (sw) 7.75 (sw) (sw) 7.75 (sw) (sw) 7.75 (sw) / (sw) 9.00 (sw) / (sw) 9.00 (sw) (sw) 9.00 (sw) (sw) 9.00 (sw) (sw) 9.00 (sw) No. 25 Std. No. 29T w/ Thd. ranch Weight Each / (sw) (sw) (sw) (sw) (sw) (sw) (sw) (sw) (sw) (sw) (sw) (sw) # # TM For GS fitting information, see publication ontact Victaulic for details. Note: ll fittings are ductile iron unless otherwise noted with an sw or s. SW= Segmentally Welded. S= arbon Steel IMPORTNT NOTE: No. 29T Threaded Outlet Reducing Tees are supplied NPT and are available with ritish Standard threads. For ritish Standard specify "SP" clearly on order. # For roll grooved systems, Victaulic offers the dvanced Groove System (GS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. VITULI IS REGISTERED TRDEMRK OF VITULI OMPNY VITULI OMPNY. LL RIGHTS RESERVED. REV_P 07.01_11

24 RON STEEL PIPE - GROOVED FITTINGS Grooved End Fittings Reducing Tee NO. 25 Grooved ranch NO. 29T Threaded ranch to E to E NO. 25 NO. 29T NO. 25 NO. 29T No. 25 Std. No. 29T w/ Thd. ranch Weight Each # # # No. 25 Std. No. 29T w/ Thd. ranch Weight Each # # TM For GS fitting information, see publication ontact Victaulic for details. Note: ll fittings are ductile iron unless otherwise noted with an sw or s. SW= Segmentally Welded. S= arbon Steel IMPORTNT NOTE: No. 29T Threaded Outlet Reducing Tees are supplied NPT and are available with ritish Standard threads. For ritish Standard specify "SP" clearly on order. # For roll grooved systems, Victaulic offers the dvanced Groove System (GS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. ast fitting available. ontact Victaulic for details. VITULI IS REGISTERED TRDEMRK OF VITULI OMPNY VITULI OMPNY. LL RIGHTS RESERVED _12 REV_P

25 TM RON STEEL PIPE - GROOVED FITTINGS Grooved End Fittings ap NO. 60 T ap NO. 60 T No. 60 No. 60 ctual Outside Diameter T Thickness No. 60 ap Weight Each 3/ / / / / ctual Outside Diameter T Thickness No. 60 ap Weight Each # (s) # (s) # (s) # (s) # (s) For GS fitting information, see publication IMPORTNT NOTES: * Steel dish caps available through 24"/600, contact Victaulic. No. 60 cap is not suitable for use in vacuum service with Style 72 or 750 couplings. No. 61 bull plugs should be used, see pg. 35. # For roll grooved systems, Victaulic offers the dvanced Groove System (GS). For pricing and availability of cut groove fittings in this size, contact your nearest Victaulic sales office. Note: ll fittings are ductile iron unless otherwise noted with an sw or s. SW= Segmentally Welded. S= arbon Steel * * * * * VITULI IS REGISTERED TRDEMRK OF VITULI OMPNY VITULI OMPNY. LL RIGHTS RESERVED _18 REV_P

26 RON STEEL PIPE - GROOVED FITTINGS Grooved End Fittings oncentric/eccentric Reducer oncentric/eccentric Reducer NO. 50 oncentric NO. 51 Eccentric E to E E to E NO. 50 oncentric NO. 51 Eccentric E to E E to E No. 50 No. 51 No. 50 No. 51 No. 50 oncentric Reducer E to E Weight Each 1 1/4 3/ No. 51 Eccentric Reducer E to E Weight Each 1 1/2 3/ (SW) / / (SW) (SW) / (SW) / /2 3/ / / (SW) / (SW) / / (SW) / No. 50 oncentric Reducer E to E Weight Each No. 51 Eccentric Reducer E to E Weight Each 3 1/ (SW) (SW) / / (SW) (SW) / / (SW) (SW) (SW) / (SW) (SW) (SW) / (SW) / (SW) / (SW) (SW) Note: ll fittings are ductile iron unless otherwise noted with an sw or s. SW= Segmentally Welded. S= arbon Steel VITULI IS REGISTERED TRDEMRK OF VITULI OMPNY VITULI OMPNY. LL RIGHTS RESERVED _22 REV_P