Metallized Polyester Film Capacitors (MKT and MFT)
|
|
- Ἰωήλ Ράγκος
- 5 χρόνια πριν
- Προβολές:
Transcript
1 Metallized Polyester Film Capacitors (MKT and MFT) Plastic Case B30 B39 Standard applications Construction Dielectric: polyethylene terephthalate (polyester) Stacked-ilm technology or lead spacing and 7, mm as well as or and 1 mm (3 00 Vdc) Wound capacitor technology or lead spacing mm (30 Vdc), or lead spacing 1 mm ( Vdc), or lead spacing, and 7, mm Plastic case (UL 9 V-0) Epoxy resin sealing Features High pulse strength High contact reliability Terminals Parallel wire leads, tinned Also available with (3, ± 0,3) mm lead length Special lead lengths available upon request Dimensions in mm Lead spacing Diameter d 1 Type ± 0,,0 0, B 3 9 7, 0, B 3 0,0 0, 1) /0, B 3 1 1,0 0,8 B 3, 0,8 B 3 3 7, 0,8 B 3 1) 0, mm or capacitor width b = mm Marking Manuacturer s logo, lot number, style and type (Txx) or lead spacing mm, type (coded) or lead spacing mm (B39 =ˆ 1), rated capacitance (coded), capacitance tolerance (code letter), rated dc voltage, date o manuacture (coded) Delivery mode Bulk (untaped) Taped (Ammo pack or reel) For notes on taping, reer to chapter Taping and packing, page /00
2 MKT B 3 0 B 3 9 Overview o available types Lead mm 7, mm mm 1 mm, mm 7, mm spacing Type B 3 9 B 3 0 B 3 1 B 3 B 3 3 B 3 Page ,0 nf 1, nf, nf 3,3 nf,7 nf 0 Vdc 3 Vdc 0 Vdc 0 Vdc 00 Vdc 30 Vdc,8 nf nf 1 nf nf 33 nf 7 nf 8 nf 0, µf 0,1 µf 0, µf 0,33 µf 0,7 µf 0,8 µf 1,0 µf 1, µf, µf 3,3 µf,7 µf,8 µf µf 1 µf µf 33 µf Note Stacked-ilm technology Stacked-ilm/ Wound capacitor technology 3 Vdc 0 Vdc 0 Vdc 00 Vdc 3 Vdc 0 Vdc 0 Vdc 00 Vdc 30 Vdc 3 Vdc 0 Vdc 0 Vdc 00 Vdc 30 Vdc 3 Vdc 0 Vdc 0 Vdc 00 Vdc 30 Vdc 0 Vdc 0 Vdc 00 Vdc 30 Vdc Wound capacitor technology 1 1/00
3 B39 MKT Ordering codes and packing units, lead spacing mm V R (, 0 Hz) 0 Vdc (3 ) 3 Vdc (0 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions b h l (mm) Ammo pack Reel Untaped 0,33 µf 3,0, 7, B39-C33-+ *** ,7 µf 3, 8,0 7, B39-C7-+ *** ,8 µf, 9, 7,3 B39-C8-+ *** ,0 µf, 9, 7,3 B39-C-+ *** , µf,0, 7, B39-C1-+ *** , µf 7,8 13,0 7,8 B39-D-+ *** ,3 µf 7,8 13,0 7,8 B39-D33-+ *** ,0 nf,, 7, B39-C-+ *** , nf,, 7, B39-C1-+ *** , nf,, 7, B39-C-+ *** ,3 nf,, 7, B39-C33-+ *** ,7 nf,, 7, B39-C7-+ *** ,8 nf,, 7, B39-C8-+ *** nf,, 7, B39-C3-+ *** nf,, 7, B39-C13-+ *** nf,, 7, B39-C3-+ *** nf,, 7, B39-C333-+ *** nf,, 7, B39-C73-+ *** nf,, 7, B39-C83-+ *** , µf,, 7, B39-C-+ *** ,1 µf,, 7, B39-C1-+ *** , µf,, 7, B39-C-+ *** ,33 µf 3,0, 7, B39-C33-+ *** ,7 µf 3, 8,0 7, B39-C7-+ *** ,8 µf, 9, 7,3 B39-C8-+ *** ,0 µf, 9, 7,3 B39-C-+ *** , µf,0, 7, B39-C1-+ *** , µf 7,8 13,0 7,8 B39-D-+ *** Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 The ordering code or untaped components ends ater the tolerance code letter. For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B39-C33-K3 17 1/00
4 MKT B39 Ordering codes and packing units, lead spacing mm V R (, 0 Hz) 0 Vdc (3 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions Ammo Reel Untaped b h l (mm) pack 1,0 nf,, 7, B39-C1-+ *** , nf,, 7, B39-C11-+ *** , nf,, 7, B39-C1-+ *** ,3 nf,, 7, B39-C133-+ *** ,7 nf,, 7, B39-C17-+ *** ,8 nf,, 7, B39-C18-+ *** nf,, 7, B39-C13-+ *** nf,, 7, B39-C113-+ *** nf,, 7, B39-C13-+ *** nf,, 7, B39-C *** nf,, 7, B39-C173-+ *** nf,, 7, B39-C183-+ *** , µf,, 7, B39-C1-+ *** ,1 µf 3,0, 7, B39-C11-+ *** , µf 3, 8,0 7, B39-C1-+ *** ,33 µf 3, 8,0 7, B39-C133-+ *** ,7 µf, 9, 7,3 B39-C17-+ *** ,8 µf,0, 7, B39-C18-+ *** ,0 µf 7,8 13,0 7,8 B39-D1-+ *** Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 The ordering code or untaped components ends ater the tolerance code letter. For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B39-C1-K3 18 1/00
5 B39 MKT Ordering codes and packing units, lead spacing mm V R (, 0 Hz) 0 Vdc (10 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions Ammo Reel Untaped b h l (mm) pack 1,0 nf,, 7, B39-C3-+ *** , nf,, 7, B39-C31-+ *** , nf,, 7, B39-C3-+ *** ,3 nf,, 7, B39-C333-+ *** ,7 nf,, 7, B39-C37-+ *** ,8 nf,, 7, B39-C38-+ *** nf,, 7, B39-C33-+ *** nf,, 7, B39-C313-+ *** nf,, 7, B39-C33-+ *** nf 3,0, 7, B39-C *** nf 3, 8,0 7, B39-C373-+ *** nf, 9, 7,3 B39-C383-+ *** , µf, 9, 7,3 B39-C3-+ *** ,1 µf,0,0 7, B39-C31-+ *** , µf 7,8 13,0 7,8 B39-D3-+ *** ,33 µf 7,8 13,0 7,8 B39-C333-+ *** ,7 µf 7,8 13,0 7,8 B39-C37-+ *** Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 The ordering code or untaped components ends ater the tolerance code letter. For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B39-C3-K3 19 1/00
6 MKT B39 Ordering codes and packing units, lead spacing mm V R (, 0 Hz) 00 Vdc (00 ) 30 Vdc (00 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions b h l (mm) Ammo pack Reel Untaped 1,0 nf,, 7, B39-C-+ *** , nf,, 7, B39-C1-+ *** , nf,, 7, B39-C-+ *** ,3 nf,, 7, B39-C33-+ *** ,7 nf,, 7, B39-C7-+ *** ,8 nf,, 7, B39-C8-+ *** nf 3,0, 7, B39-C3-+ *** nf 3, 8,0 7, B39-C13-+ *** nf, 9, 7,3 B39-B3-+ *** nf,0,0 7, B39-B333-+ *** nf,0, 7, B39-B73-+ *** nf 7,8 13,0 7,8 B39-D83-+ *** , µf 7,8 13,0 7,8 B39-D-+ *** ,0 nf,, 7, B39-C8-+ *** , nf,, 7, B39-C81-+ *** , nf,, 7, B39-C8-+ *** ,3 nf 3, 8,0 7, B39-C833-+ *** ,7 nf 3, 8,0 7, B39-C87-+ *** ,8 nf 3, 8,0 7, B39-C88-+ *** nf,0,0 7, B39-C83-+ *** Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 The ordering code or untaped components ends ater the tolerance code letter. For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B39-C-K3 0 1/00
7 B30 MKT 7, Ordering codes and packing units, lead spacing 7, mm V R (, 0 Hz) 3 Vdc (0 ) 0 Vdc (3 ) 0 Vdc (10 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions b h l (mm) Ammo pack Reel Untaped 8 nf, 7,0,0 B30-C83-+ *** , µf, 7,0,0 B30-C-+ *** ,1 µf, 7,0,0 B30-C1-+ *** , µf, 7,0,0 B30-C-+ *** ,33 µf, 7,0,0 B30-C33-+ *** ,7 µf 3,0 8,0,0 B30-C7-+ *** ,8 µf,0 8,,0 B30-C8-+ *** ,0 µf,0,,0 B30-C-+ *** , µf,0,,0 B30-C1-+ *** , µf,0 1,0,3 B30-C-+ *** nf, 7,0,0 B30-C173-+ *** nf, 7,0,0 B30-C183-+ *** , µf, 7,0,0 B30-C1-+ *** ,1 µf 3,0 8,0,0 B30-C11-+ *** , µf 3,0 8,0,0 B30-C1-+ *** ,33 µf,0 8,,0 B30-C133-+ *** ,7 µf,0,,0 B30-C17-+ *** ,8 µf,0 1,0,3 B30-C18-+ *** ,0 µf,0 1,0,3 B30-C1-+ *** nf, 7,0,0 B30-C313-+ *** nf, 7,0,0 B30-C33-+ *** nf, 7,0,0 B30-C *** nf, 7,0,0 B30-C373-+ *** nf 3,0 8,0,0 B30-C383-+ *** , µf,0 8,,0 B30-C3-+ *** ,1 µf,0,,0 B30-C31-+ *** Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 The ordering code or untaped components ends ater the tolerance code letter. For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B30-C83-K3 1 1/00
8 MKT B30 7, Ordering codes and packing units, lead spacing 7, mm V R (, 0 Hz) 00 Vdc (00 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions Ammo Reel Untaped b h l (mm) pack 1,0 nf, 7,0,0 B30-C-+ *** , nf, 7,0,0 B30-C1-+ *** , nf, 7,0,0 B30-C-+ *** ,3 nf, 7,0,0 B30-C33-+ *** ,7 nf, 7,0,0 B30-C7-+ *** ,8 nf, 7,0,0 B30-C8-+ *** nf, 7,0,0 B30-C3-+ *** nf 3,0 8,0,0 B30-C13-+ *** nf,0 8,,0 B30-C3-+ *** nf,0,,0 B30-C333-+ *** nf,0,,0 B30-C73-+ *** nf,0 1,0,3 B30-C83-+ *** Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 The ordering code or untaped components ends ater the tolerance code letter. For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B30-C-K3 1/00
9 B31 MKT Ordering codes and packing units, lead spacing mm V R (, 0 Hz) 3 Vdc (0 ) 0 Vdc (3 ) 0 Vdc (10 ) 00 Vdc (00 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions b h l (mm) Ammo pack Reel Untaped 0,7 µf,0 7,0 13,0 B31-C7-+ *** ,8 µf,0 7,0 13,0 B31-C8-+ *** ,0 µf,0 9,0 13,0 B31-C-+ *** , µf,0 11,0 13,0 B31-C1-+ *** , µf,0 11,0 13,0 B31-C-+ *** ,3 µf,0 1,0 13,0 B31-C33-+ *** , µf,0 7,0 13,0 B31-C1-+ *** ,1 µf,0 7,0 13,0 B31-C11-+ *** , µf,0 7,0 13,0 B31-C1-+ *** ,33 µf,0 7,0 13,0 B31-C133-+ *** ,7 µf,0 9,0 13,0 B31-C17-+ *** ,8 µf,0 11,0 13,0 B31-C18-+ *** ,0 µf,0 1,0 13,0 B31-C1-+ *** nf,0 7,0 13,0 B31-C *** nf,0 7,0 13,0 B31-C373-+ *** nf,0 7,0 13,0 B31-C383-+ *** , µf,0 7,0 13,0 B31-C3-+ *** ,1 µf,0 9,0 13,0 B31-C31-+ *** , µf,0 11,0 13,0 B31-C3-+ *** ,33 µf,0 11,0 13,0 B31-C333-+ *** ,7 µf,0 1,0 13,0 B31-C37-+ *** nf,0 7,0 13,0 B31-C3-+ *** nf,0 7,0 13,0 B31-C13-+ *** nf,0 7,0 13,0 B31-C3-+ *** nf,0 9,0 13,0 B31-C333-+ *** nf,0 11,0 13,0 B31-C73-+ *** nf,0 11,0 13,0 B31-C83-+ *** , µf,0 1,0 13,0 B31-C-+ *** Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 The ordering code or untaped components ends ater the tolerance code letter. For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B31-C7-K3 3 1/00
10 MKT B31 Ordering codes and packing units, lead spacing mm V R (, 0 Hz) 30 Vdc (00 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions Ammo Reel Untaped b h l (mm) pack,8 nf ),0 9,0 13,0 B31-N88-+ *** nf ),0 9,0 13,0 B31-N83-+ *** nf ),0 11,0 13,0 B31-N813-+ *** nf ),0 11,0 13,0 B31-N83-+ *** nf ),0 1,0 13,0 B31-N *** Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 The ordering code or untaped components ends ater the tolerance code letter. For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B31-N88-K3 ) Wound capacitor technology 1/00
11 B3 MKT 1 Ordering codes and packing units, lead spacing 1 mm V R (, 0 Hz) 3 Vdc (0 ) 0 Vdc (3 ) 0 Vdc (10 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions b h l (mm) Ammo pack Reel Untaped 0,8 µf,0, 18,0 B3-C8-+ *** ,0 µf,0, 18,0 B3-C-+ *** , µf,0, 18,0 B3-C1-+ *** , µf,0, 18,0 B3-C-+ *** ,3 µf,0 11,0 18,0 B3-C33-+ *** ,7 µf 7,0 1, 18,0 B3-C7-+ *** ,8 µf 8, 1, 18,0 B3-C8-+ *** µf 9,0 17, 18,0 B3-C-+ *** ,33 µf,0, 18,0 B3-C133-+ *** ,7 µf,0, 18,0 B3-C17-+ *** ,8 µf,0, 18,0 B3-C18-+ *** ,0 µf,0, 18,0 B3-C1-+ *** , µf,0 11,0 18,0 B3-C11-+ *** , µf 7,0 1, 18,0 B3-C1-+ *** ,3 µf 8, 1, 18,0 B3-C133-+ *** ,7 µf 9,0 17, 18,0 B3-C17-+ *** , µf,0, 18,0 B3-C3-+ *** ,1 µf,0, 18,0 B3-C31-+ *** , µf,0, 18,0 B3-C3-+ *** ,33 µf,0, 18,0 B3-C333-+ *** ,7 µf,0 11,0 18,0 B3-C37-+ *** ,8 µf 7,0 1, 18,0 B3-C38-+ *** ,0 µf 8, 1, 18,0 B3-C3-+ *** ,0 µf ) 8, 1, 18,0 B3-N3-+ *** , µf 9,0 17, 18,0 B3-C31-+ *** , µf ) 9,0 17, 18,0 B3-N31-+ *** Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 The ordering code or untaped components ends ater the tolerance code letter. For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B3-C8-K3 ) Wound capacitor technology 1/00
12 MKT B3 1 Ordering codes and packing units, lead spacing 1 mm V R (, 0 Hz) 00 Vdc (00 ) 30 Vdc (00 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions Ammo Reel Untaped b h l (mm) pack 7 nf,0, 18,0 B3-C73-+ *** nf,0, 18,0 B3-C83-+ *** , µf,0, 18,0 B3-C-+ *** , µf ),0, 18,0 B3-N-+ *** ,1 µf,0 11,0 18,0 B3-C1-+ *** ,1 µf ),0, 18,0 B3-N1-+ *** , µf 7,0 1, 18,0 B3-C-+ *** , µf ),0 11,0 18,0 B3-N-+ *** ,33 µf 8, 1, 18,0 B3-C33-+ *** ,33 µf ) 8, 1, 18,0 B3-N33-+ *** ,7 µf ) 8, 1, 18,0 B3-N7-+ *** ,8 µf ) 9,0 17, 18,0 B3-N8-+ *** nf ),0, 18,0 B3-Q *** nf ),0, 18,0 B3-Q873-+ *** nf ),0 11,0 18,0 B3-Q883-+ *** , µf ) 7,0 1, 18,0 B3-Q8-+ *** ,1 µf ) 8, 1, 18,0 B3-Q81-+ *** , µf ) 9,0 17, 18,0 B3-Q8-+ *** Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B3-C73-K3 ) Wound capacitor technology 1/00
13 B33 MKT, Ordering codes and packing units, lead spacing, mm V R (, 0 Hz) 3 Vdc (0 ) 0 Vdc (3 ) 0 Vdc (10 ) 00 Vdc (00 ) 30 Vdc (00 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions b h l (mm) Ammo pack Reel Untaped 3,3 µf,0 1,0, B33-Q33-+ *** ,7 µf 7,0 1,0, B33-Q7-+ *** ,8 µf 8, 1,, B33-Q8-+ *** µf, 18,, B33-Q-+ *** , µf,0 1,0, B33-Q11-+ *** , µf,0 1,0, B33-Q1-+ *** ,3 µf,0 1,0, B33-Q133-+ *** ,7 µf 7,0 1,0, B33-Q17-+ *** ,8 µf 8, 1,, B33-Q18-+ *** ,7 µf,0 1,0, B33-Q37-+ *** ,8 µf,0 1,0, B33-Q38-+ *** ,0 µf,0 1,0, B33-Q3-+ *** , µf 7,0 1,0, B33-Q31-+ *** , µf, 1,, B33-Q3-+ *** ,3 µf 11,0 0,, B33-Q333-+ *** , µf,0 1,0, B33-Q-+ *** ,33 µf,0 1,0, B33-Q33-+ *** ,7 µf 7,0 1,0, B33-Q7-+ *** ,8 µf 8, 1,, B33-Q8-+ *** ,0 µf, 1,, B33-Q-+ *** , µf,0 1,0, B33-Q8-+ *** ,1 µf,0 1,0, B33-Q81-+ *** , µf 7,0 1,0, B33-Q8-+ *** ,33 µf, 1,, B33-Q833-+ *** ,7 µf, 0,, B33-Q87-+ *** Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 The ordering code or untaped components ends ater the tolerance code letter. For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B33-Q8-K3 7 1/00
14 MKT B3 7, Ordering codes and packing units, lead spacing 7, mm V R (, 0 Hz) 0 Vdc (3 ) 0 Vdc (10 ) 00 Vdc (00 ) 30 Vdc (0 ) C R Maximum Ordering code 1) Packing units (pcs) dimensions b h l (mm) Ammo pack Reel Untaped,7 µf 11,0 1,0 31, B3-Q17-+ *** 30 30,8 µf 11,0 1,0 31, B3-Q18-+ *** µf 11,0 1,0 31, B3-Q1-+ *** µf 1, 1, 31, B3-Q11-+ *** µf 1,0, 31, B3-Q1-+ *** µf 18,0 7, 31, B3-Q133-+ *** 00 1, µf 11,0 1,0 31, B3-Q31-+ *** 30 30, µf 11,0 1,0 31, B3-Q3-+ *** ,3 µf 11,0 1,0 31, B3-Q333-+ *** 30 30,7 µf 11,0 1,0 31, B3-Q37-+ *** 30 30,8 µf 1,0, 31, B3-Q38-+ *** 0 0 µf 18,0 7, 31, B3-Q3-+ *** 00 1,0 µf 11,0 1,0 31, B3-Q-+ *** , µf 11,0 1,0 31, B3-Q1-+ *** 30 30, µf 1, 1, 31, B3-Q-+ *** ,3 µf 1,0, 31, B3-Q33-+ *** 0,7 µf 18,0 7, 31, B3-Q7-+ *** 00 0,33 µf 11,0 1,0 31, B3-Q833-+ *** ,7 µf 11,0 1,0 31, B3-Q87-+ *** ,8 µf 11,0 1,0 31, B3-Q88-+ *** ,0 µf 1,0, 31, B3-Q8-+ *** 0 0 1, µf 18,0 7, 31, B3-Q81-+ *** 00 Capacitance tolerance: ± 0 % =ˆ M, ± % =ˆ K, ± % =ˆ J 1) + Code letter or capacitance tolerance *** Code number or packing: Ammo pack = 89, reel = 189 The ordering code or untaped components ends ater the tolerance code letter. For capacitors with 3, mm lead length, append code number 3 to the tolerance code, e.g.: B3-Q18-K3 8 1/00
15 B30 B 3 9 MKT Technical data C Climatic category /0/ in accordance with IEC Lower category temperature T min Upper category temperature T max + 0 C (+ 1 C or 00 h and V C = 0, V R ) Damp heat test days/0 C/93 % relative humidity Limit values ater damp Capacitance change C/C % heat test Dissipation actor change tan δ 3 (at 1 khz) Insulation resistance R is 0 % o minimum or time constant τ = C R R is as-delivered values Reliability: Reerence conditions Failure rate Service lie Failure criteria: Total ailure Failure due to variation o parameters DC test voltage 0, V R ; 0 C 1 9 /h = 1 it For a conversion table or other operating conditions and temperatures, reer to chapter Quality assurance, page h Short circuit or open circuit Capacitance change C/C > % Dissipation actor tan δ > upper limit value Insulation resistance R is < 10 MΩ (C R 0,33 µf) or time constant τ = C R R is < 0 s (C R > 0,33 µf) 1, V R, s Category voltage V C Operation with dc voltage or ac voltage up to 0 Hz Operating voltage or short operating periods Dissipation actor tan δ (in 3 ) at 0 C (upper limit values) Insulation resistance R is or time constant τ = C R R is at 0 C, rel. humidity % (minimum as-delivered values) T 8 C V C = 1,0 V R V C,rms = 1,0 T 0 C V C = 0,8 V R V C,rms = 0,8 T 8 C V = 1, V C, max. 000 h V = 1,0 V C,rms, max. 000 h T 0 C V = 1, V C, max. 000 h V = 1,0 V C,rms, max. 000 h T 1 C V = 0, V R, max. 00 h V = 0,, max. 00 h C R 0,1 µf 0,1 µf < C R 1 µf C R > 1 µf at 1 khz 8 khz khz 30 V R C R 0,33 µf C R > 0,33 µf 0 Vdc 370 MΩ 10 s 0 Vdc 700 MΩ 00 s 9 1/00
16 MKT B 3 9 B 3 9 Impedance Z versus requency (typical values) Pulse handling capability Maximum permissible voltage change per unit o time or non-sinusoidal voltages (pulse, sawtooth) V R Max. rate o voltage rise V pp /τ in V/µs (or V pp = V R ) Lead spacing mm 7, mm mm 1) 1 mm 1), mm 1) 7, mm 1) 0 Vdc 00 3 Vdc (3) 0 Vdc () (3) 0 Vdc () () (,) 00 Vdc (0) () (7,) 30 Vdc 800 (0) () (1) (1) For V pp < V R, the permissible voltage rise rate value V pp /τ may be multiplied by the actor V R /V pp. Also reer to the calculation example in chapter General technical inormation, page 30. V R Pulse characteristic k 0 in V /µs (or V pp V R ) Lead spacing mm 7, mm mm 1) 1 mm 1), mm 1) 7, mm 1) 0 Vdc Vdc (37) 0 Vdc (70) (00) 0 Vdc ( 000) (3 000) ( 0) 00 Vdc (1 000) (8 000) ( 000) 30 Vdc ( 000) (30 000) (18 000) (1 000) 1) Values in brackets apply to wound capacitors 30 1/00
17 B39 MKT Permissible ac voltage versus requency Lead spacing mm 0 Vdc/ 3 3 Vdc/ 0 0 Vdc/ 3 0 Vdc/ KMK KMK0717-K ,0 nf 3,3 nf nf 0,1 µf 0,7 µf 1,0 µf 0 1,0 nf,8 nf 7 nf 0,7 µf 1 3 Hz 1 3 Hz 31 1/00
18 MKT B39 Permissible ac voltage versus requency Lead spacing mm 00 Vdc/ Vdc/ V ac KMK070-W nf,7 nf nf 3 Hz 3 1/00
19 B30 MKT 7, Permissible ac voltage versus requency Lead spacing 7, mm 3 Vdc/ 0 0 Vdc/ KMK03-H 7 µf 0, µf 0,8 µf 1,0 µf 1 3 Hz 0 Vdc/ Vdc/ V ac KMK070-N nf 1 nf 8 nf 3 Hz 33 1/00
20 MKT B31 Permissible ac voltage versus requency Lead spacing mm 3 Vdc/ 0 0 Vdc/ 3 0 Vdc/ Vdc/ /00
21 B31 MKT Permissible ac voltage versus requency Lead spacing mm 30 Vdc/ /00
22 MKT B3 1 Permissible ac voltage versus requency Lead spacing 1 mm 3 Vdc/ 0 0 Vdc/ 3 00 V 00 rms KMK088-W 00 V 00 rms KMK ,8 µf, µf,7 µf µf 0,33 µf 1,0 µf 3,3 µf,7 µf 1 3 Hz 1 3 Hz 0 Vdc/ Vdc/ V 00 rms KMK ,1 µf 0,33 µf 1,0 µf 1, µf 1 3 Hz 3 1/00
23 B3 MKT 1 Permissible ac voltage versus requency Lead spacing 1 mm 30 Vdc/ V 00 rms KMK087-N nf 8 nf 0,1 µf 0, µf 1 3 Hz 37 1/00
24 MKT B33, Permissible ac voltage versus requency Lead spacing, mm 3 Vdc/ 0 0 Vdc/ KMK0-Q 3,3 µf,8 µf µf 1 3 Hz 0 Vdc/ Vdc/ V 00 rms KMK08-F 0, µf 0,8 µf 1,0 µf 1 3 Hz 38 1/00
25 B33 MKT, Permissible ac voltage versus requency Lead spacing, mm 30 Vdc/ V 00 rms KMK ,1 µf 0, µf 0,7 µf 1 3 Hz 39 1/00
26 MKT B3 7, Permissible ac voltage versus requency Lead spacing 7, mm 0 Vdc/ 3 0 Vdc/ V 00 rms KMK0-Y KMK ,7 µf 1 µf 33 µf 1, µf 3,3 µf µf 1 3 Hz Hz 00 Vdc/ Vdc/ 0 0 1/00
27 Herausgegeben von EPCOS AG Marketing Kommunikation, Postach , 8117 München, DEUTSCHLAND EPCOS AG 000. Alle Rechte vorbehalten. Vervielältigung, Veröentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet. Mit den Angaben in dieser Broschüre werden die Bauelemente speziiziert, keine Eigenschaten zugesichert. Bestellungen unterliegen den vom ZVEI empohlenen Allgemeinen Lieerbedingungen ür Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschüre ersetzt die vorige Ausgabe. Fragen über Technik, Preise und Lieermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaten im Ausland. Bauelemente können augrund technischer Erordernisse Geahrstoe enthalten. Auskünte darüber bitten wir unter Angabe des betreenden Typs ebenalls über die zuständige Vertriebsgesellschat einzuholen. Published by EPCOS AG Marketing Communications, P.O. Box , 8117 Munich, GERMANY EPCOS AG 000. All Rights Reserved. Reproduction, publication and dissemination o this brochure and the inormation contained therein without EPCOS prior express consent is prohibited. The inormation contained in this brochure describes the type o component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions or the Supply o Products and Services o the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manuacturers Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Oices o EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For inormation on the type in question please also contact one o our Sales Oices. 1
Standardized R/T Characteristics. Standardized R/T characteristics. 1 Introduction
Standardized R/T characteristics 1 Introduction 1.1 Resistance value The R/T characteristics tabulated in the following have been standardized for the resistance value at 25 C. The actual resistance values
Διαβάστε περισσότεραTantalum Chip Capacitors SpeedPower; Low ESR B45197, B45198
Construction Polar tantalum capacitors with solid electrolyte Conventional Ta-MnO 2 technology Flame-retardant plastic case (UL 94 V-0) Optionally tinned or gold-plated terminals Features High volumetric
Διαβάστε περισσότεραC4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
Διαβάστε περισσότεραB37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Διαβάστε περισσότεραNTC thermistors for temperature measurement
NTC thermistors for temperature measurement SMD NTC thermistors with nickel barrier termination, case size 0603 Series/Type: Date: June 2008 EPCOS AG 2008. Reproduction, publication and dissemination of
Διαβάστε περισσότερα1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Διαβάστε περισσότεραPPA Metallized polypropylene film capacitor MKP - Snubber/pulse - High current
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and high pulse applications
Διαβάστε περισσότεραMultilayer Chip Capacitors C0G/NP0/CH
Multilayer Chip Capacitors C0G/NP0/CH Features Good thermal stability High insulation resistance Low dissipation factor Low inductance Applications Resonant circuits Filter circuits Timing elements Coupling
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Διαβάστε περισσότεραApplications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Διαβάστε περισσότεραInterference Suppression Capacitor
MOLDED BOX CONSTRUCTION, SUPPRESSION CAPACITOR, RADIAL LEAD FEATURES UL, CSA, VDE, CQC, CE, ENEC APPROVALS X2 SAFETY CAP CLASSIFICATION FOR USE IN ACROSS-THE-LINE APPLICATIONS METALLIZED POLYPROPYLENE
Διαβάστε περισσότεραThin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Διαβάστε περισσότεραPolymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
Διαβάστε περισσότεραDATA SHEET Surface mount NTC thermistors. BCcomponents
DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
Διαβάστε περισσότεραAluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
Διαβάστε περισσότεραAluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Διαβάστε περισσότεραSurface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
Διαβάστε περισσότεραSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Διαβάστε περισσότεραNKT NTC Thermistor. Negative Temperature Coefficient Thermistor FEATURES
FEATURES Large, strong capacity of suppression of inrush current Big material (B value), small residual Small size, Long life, high reliability and fast response APPLICATIONS Switching -supply, switch,
Διαβάστε περισσότεραAerovox Corp. Type H High Voltage AC & DC Capacitors. Film Capacitors for Power Electronics Applications. RoHS Compliant. Highlights.
H Aerovox Corp. Film Capacitors for Power Electronics Applications Specifications Outline Drawing Capacitance Range: AC Voltage Range: DC Voltage Range: Temperature Range: Capacitance Tolerance: Dissipation
Διαβάστε περισσότεραNTC Thermistor:TTC3 Series
Features. RoHS compliant 2. Halogen-Free(HF) series are available 3. Body size: Ф3mm 4. Radial lead resin coated 5. Operating temperature range: -40 ~+25 6. Wide resistance range 7. Cost effective 8. Agency
Διαβάστε περισσότεραData sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Διαβάστε περισσότεραType 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
Διαβάστε περισσότεραSIOV Metal Oxide Varistors Leaded Varistors (StandarD Series)
Leaded Varistors () Disk varistors StandarD series, dimensions Construction Round varistor element, leaded Coating: epoxy resin, flame-retardant to UL 94 V-0 Terminals: tinned copper wire Features Wide
Διαβάστε περισσότεραSpecification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)
High CV-value Long Life > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life Optimized designs available on request RoHS Compliant application Basic design Smoothing, energy storage,
Διαβάστε περισσότεραVAR Series Zinc Oxide Varistor
FEATURES Round Zinc Oxide, leaded Coating: epoxy resin, flame-retardant material Operating Temperature Range: -40 ~+105 Wide operating voltage Approvals: CQ C, UL, VDE RoHS 201165EU; REACH Compliant High
Διαβάστε περισσότεραCarbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
Διαβάστε περισσότεραFP series Anti-Bend (Soft termination) capacitor series
FP series Anti-Bend (Soft termination) capacitor series Features Applications» High performance to withstanding 5mm of substrate» For general digital circuit bending test guarantee» For power supply bypass
Διαβάστε περισσότερα± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:
TS-UP Series 85 C, 3000 hours Compact size for general purpose and industrial applications 2 and 3 pin versions available 20mm lengths for low profile applications RoHS Compliant Rated Working Voltage:
Διαβάστε περισσότεραMetal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Διαβάστε περισσότεραCSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Διαβάστε περισσότεραLong 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction
TS-HA/HB Series 105 C, 3000 hours Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature:
Διαβάστε περισσότεραTHICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
Διαβάστε περισσότεραYJM-L Series Chip Varistor
Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication
Διαβάστε περισσότεραCeramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Διαβάστε περισσότεραCurrent Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Διαβάστε περισσότεραNTIC Series. Limiting Inrush Current. NTC Power Thermistor for FEATURES PART NUMBER SYSTEM UL E Ф5~Ф15mm NTIC M S.
FEATURES UL E223037 Body size: Ф5mm ~ Ф30mm Radial lead resin coated High power rating Wide resistance range Cost effective Operating temperature range: Ф5mm: -40ºC~150ºC Ф8~Ф10mm: -40ºC~170ºC Ф13~Ф30mm:
Διαβάστε περισσότερα+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
Διαβάστε περισσότεραCERAMIC DISC CAPACITOR Class II 50V,100V,500V,1KV,2KV,3KV, Hi-K Type
Features: Capacitance has non-linear temperature coefficient Large in small size Epoxy Coating for 2KV and 3KV parts (equivalent to UL94V-0 standards) RoHS Compliance Halogen free products are available
Διαβάστε περισσότεραSmaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
Διαβάστε περισσότεραShape Square. Tolerance of Varistor Voltage For Varistor voltage<68, Special For Varistor voltage 68, 10% Lead Wire Type Straight Cut Lead
Leaded Varistor for urge uppression VP eries Operating Temp. : -40 ~ +85 FEATURE Fast response Excellent clamping ratio, high peak current and pulse energy withstanding characteristics, providing strong
Διαβάστε περισσότεραNTC Thermistor:SCK Series
Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:
Διαβάστε περισσότεραSMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
Διαβάστε περισσότεραDisk Varistors, S Standard
Disk Varistors, S Standard Construction Round varistor element Coating: epoxy resin, flame-retardant to UL 94 V-0 Terminals: tinned copper wire New features New high-energy varistors S14/S20 E2 PSpice
Διαβάστε περισσότεραLS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Διαβάστε περισσότεραNTC Thermistor:SCK Series
Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:
Διαβάστε περισσότεραLR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Διαβάστε περισσότεραData Sheet High Reliability Glass Epoxy Multi-layer Materials (High Tg & Low CTE type) Laminate R-1755V Prepreg R-1650V
Data Sheet High Reliability Glass Epoxy Multi-layer Materials (High Tg & Low CTE type) Laminate R-1755V Prepreg R-1650V Nov. 2015 No.15111336 Specification / Laminate R-1755V No.; 15111336-1 Property Units
Διαβάστε περισσότεραThick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MW) THICK FILM ON ALUMINA SUSTRATE,
Διαβάστε περισσότεραNTC Thermistor:SCK Series
Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:
Διαβάστε περισσότεραNTC Thermistor:SCK Series
NTC Thermistor:SCK Series Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating
Διαβάστε περισσότεραMetal Film Flame-Proof Resistors
Features -Low Noise -Low TCR from ±15~100PPM/ -High Precision from ±0.1%~1% -Complete Flameproof Construction UL-1412. -Coating meets UL94V-0 Applications -Telecommunication -Medical Equipment -Consumer
Διαβάστε περισσότεραNTC Thermistor:TSM type
Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended
Διαβάστε περισσότεραE62-TAB AC Series Features
NEW! E62-TAB AC Series Features Perfect for non-sinusoidal voltages and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated
Διαβάστε περισσότεραCSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Διαβάστε περισσότεραNTC Thermistor:SCK Series
Features. RoHS & HF compliant 2. Body size: Ф5mm ~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70
Διαβάστε περισσότεραSummary of Specifications
Snap Mount Large High CV High Ripple 85 C Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life for the series is 2,000 hours
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Διαβάστε περισσότεραMultilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Διαβάστε περισσότεραTransient Voltage Suppression Diodes: 1.5KE Series Axial Leaded Type 1500 W
Features 1. Reliable low cost construction utilizing molded plastic technique 2. Both bi-directional and uni-directional devices are available 3. Fast response time 4. Excellent clamping capacity 5. 1500
Διαβάστε περισσότερα1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat (Epoxy)
ARN series Thin Film High Precision Chip Resistor Features» Advanced thin film technology» Very tight tolerance down to ±0.01%» Extremely low TCR down to ±5ppm/» Wide resistance range 1ohm-3Mega ohm» Miniature
Διαβάστε περισσότεραTransient Voltage Suppressor
Transient Suppressor Features Glass passivated junction Low incremental surge resistance, excellent clamping capability Underwriters Laboratory Recognition under UL standard for safety 497B: Isolated Loop
Διαβάστε περισσότερα+85 C General Purpose Miniature Aluminum Capacitors
+85 C General Purpose Miniature Aluminum Capacitors Features- Increased CV Efficiency Non Polar Design Available (Special Order) General Specifications- Operating Temperature: -40 to +85 C Voltage Range:
Διαβάστε περισσότεραSMD Power Inductor-VLH
SMD Power Inductor-VH Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 321618C 3.2±0.3 1.6±0.2
Διαβάστε περισσότεραRF series Ultra High Q & Low ESR capacitor series
RF series Ultra High Q & Low ESR capacitor series FAITHFUL LINK Features Application» High Q and low ESR performance at high frequency» Telecommunication products & equipments:» Ultra low capacitance to
Διαβάστε περισσότεραE62 AC Series Features
E62 AC Features Perfect for non-sinusoidal s and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated overpressure
Διαβάστε περισσότεραMetal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
Διαβάστε περισσότερα2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Διαβάστε περισσότεραCurrent Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
Διαβάστε περισσότεραMelf Carbon Film Resistor MMC Series
Melf Resistor Melf Carbon Film Resistor MMC Series Coating color: Beige Features - Tolerance up to ±2%. - Wide resistance range:1ω to 10MΩ. Type Dimension TYPE L D C S 0102 2.00±0.10 1.30±0.10 0.55±0.10
Διαβάστε περισσότεραMAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
Διαβάστε περισσότεραAluminum Capacitors C, Tubular, Radial Lead
Aluminum Capacitors + 105 C, Tubular, Radial Lead FEATURES Wide temperature range Radial design in two and three lead configuration Ideal SMPS output filter PERFORMANCE CHARACTERISTICS Operating Temperature:
Διαβάστε περισσότεραRadial Polyester Film Capacitor (Inductive) PEF Series. Features. Applications. Specification
Radial Polyester Film Capacitor (Inductive) Features Inductive construction with radial leads High moisture resistance and good solderability Available on taping packing for automatic assembly RoHS compliant
Διαβάστε περισσότεραNTC Thermistor:SCK Series
Features. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φmm:-40~+70
Διαβάστε περισσότεραThin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to ±5PPM/C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
Διαβάστε περισσότεραMINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. Characteristics. Leakage Current(MAX) I=Leakage Current(µA) C=Nominal Capacitance(µF) V=Rated Voltage(V)
SERIES 5 C Long Life. Low impedance. (Rated Voltage 6.3~V.DC) FEATURES Load Life : 5 C 4~hours. Low impedance at khz with selected materials. SPECIFICATIONS Items Operating Temperature Range Rated Voltage
Διαβάστε περισσότεραThick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MΩ) THICK FILM ON ALUMINA SUSTRATE,
Διαβάστε περισσότεραTSV. Suntan ZINC OXIDE VARISTOR. Operating Temperature Range: -40 ~+85 DIMENSION. T Thickness(max.) L:16mm min
Operating Temperature Range: -40 ~+85 DIMENSION L:16mm min SIZE D MAX H MAX d+-0.05 E c max D05 8 11 0.5 5±0.8 2.5 D07 10 12.5 0.5 5±0.8 2.5 D10 13.5 16 0.7 7.5±0.8 2.5 D14 17.5 20 0.7 7.5±0.8 2.5 D20
Διαβάστε περισσότεραThin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) Type EI Size Power Rating at 70
Διαβάστε περισσότεραSMD Power Inductor-VLH
SMD Power Inductor-VH PAD AYOUT Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252510 2.5±0.2
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
Διαβάστε περισσότεραMetalized Polyester Radial Leaded Film Capacitors
Metalized Polyester Radial eaded Film Capacitors uracap International, Inc P.O. Box 1579 Woodstock, Ontario N4 0A7 Canada Phone: (519) 539-4891 Fax: (519) 539-6684 http://www.duracap.com/ MPER% %Metallized%Polyester%/%Radial%eads%
Διαβάστε περισσότεραSunlord Specifications subject to change without notice. Please check our website for latest information. Revised 2018/04/15
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Διαβάστε περισσότεραTHICK FILM CHIP RESISTOR" CAL-CHIP ELECTRONICS INC."
THICK FILM CHIP RESISTOR CAL-CHIP ELECTRONICS INC. CAL-CHIP SERIES: RM SERIES 1 2 3 INTRODUCTION SCOPE Applies to all sizes of rectangular-type fixed chip resistors with Ruthenium base as material. FEATURES
Διαβάστε περισσότεραRC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
Διαβάστε περισσότεραAxial Film Capacitors Metallized Polyester and Polypropylene
Axial Film Capacitors Metallized Polyester and Polypropylene... your source for the Ultimate in Reliability 1 Table of Contents Part Numbering System 2 Dielectric Characteristics 3 AREM 5 AFEO 6 AFPX 7
Διαβάστε περισσότεραOperating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
Διαβάστε περισσότεραMEBS Series. Metallized Polyester Film Capacitor, MiniBox P=5.0mm/Stacked. Features. Typical Applications. Specification
Metallized Polyester Film Capacitor MiniBox P=5.0mm/Stacked Metallized Polyester Film Capacitor, MiniBox P=5.0mm/Stacked Features Metallized polyester film, stacked construction Plastic case (UL94 V0),
Διαβάστε περισσότεραMPPBD Series. Double Sided Metallized Polypropylene Film Capacitor Box type. Double Sided Metallized Polypropylene Film Capacitor - Box type Features
Double Sided Metallized Polypropylene Film Capacitor Box type Double Sided Metallized Polypropylene Film Capacitor Box type Features Double sided metallized polypropylene structure. Low loss and small
Διαβάστε περισσότεραThin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) RoHS Compliant includes all homogeneous
Διαβάστε περισσότεραPEH C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life
PEH 169 85 C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life APPLICATION BASIC DESIGN Smoothing, energy storage, or pulse operation in telecommunication
Διαβάστε περισσότεραRJJ Miniature Aluminum Electrolytic Capacitors RJJ. Series RJJ High-Frequency, Low Impedance, Standard Type. Radial Type
352 Elna Corrections 80-95 /6/98 :55 AM Page Miniature Aluminum Electrolytic Capacitors Series High-Frequency, Low Impedance, Standard Type For high reliability applications, Environmentally safe. High-frequency,
Διαβάστε περισσότεραC121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]
Multilayer Chip SDV Series Operating Temp. : -55 ~+125 FEATURES SMD type suitable for high density mounting Excellent clamping ratio and quick response time (
Διαβάστε περισσότερα