Tantalum Chip Capacitors SpeedPower; Low ESR B45197, B45198
|
|
- Χριστιανός Χαράλαμπος Ουζουνίδης
- 6 χρόνια πριν
- Προβολές:
Transcript
1 Construction Polar tantalum capacitors with solid electrolyte Conventional Ta-MnO 2 technology Flame-retardant plastic case (UL 94 V-0) Optionally tinned or gold-plated terminals Features High volumetric efficiency Excellent solderability Stable temperature and frequency characteristics Low leakage current, low dissipation factor Low self-inductance High resistance to shock and vibration Suitable for use without series resistor (recommended operating voltage see General Technical Information, page 111, 4.4) Low ESR Applications Telecommunications (e.g. mobile phones, private branch exchanges) Data processing (e.g. laptops, main frames) Measuring and control engineering (e.g. voltage regulators) Automotive electronics (e.g. navigation systems) Medical engineering DC/DC converters Soldering Suitable for reflow soldering (IR and vapor phase) and wave soldering Delivery mode Taped and reeled in accordance with IEC Ordering code structure B45197 A * Passive component Tantalum capacitor Series 197A = tinned terminals Sn R = gold-plated terminals Reel diameter 9 = 180 mm, 6 = 330 mm Case size 20 = B, 30 = C, 40 = D, 50 = E Capacitance tolerance M = ± 20 %, K = ±10 %, J = ± 5 % Rated capacitance First two digits = significant figures Third digit = exponent Voltage (code number) 65 10/02
2 Specifications and characteristics in brief For characteristic curves see General Technical Information, page 107 ff. SpeedPower, Low ESR Series B45197A B45198R Technology Ta-MnO 2 Ta-MnO 2 Terminals Tinned Gold-plated Rated voltage V R (up to 85 C) 6,3 50 Vdc Rated capacitance C R 0, µf Capacitance tolerance ±10%, ± 20% ± 5% (on request) Operating temperature C Failure rate At 40 C; V R, R S 3 Ω/V (1 fit = failures/h) C R V R 330 µf V 8 fit C R V R > 330 µf V 12 fit C R V R > 330 µf V 24 fit (refer to series B4519 * H, HighCap ) Service life > h Leakage current 10 na/µc (V R, 5 min, 20 C) ESR max (20 C, mω Detail specification CECC (tinned terminals) IEC climatic category To IEC /125/56 ( 55/+125 C; 56 days damp heat test) 66 10/02
3 Dimensional drawing L 2 W 2 2 H L H 2 W 1 2 W P P Marking Positive pole marking KTA0209-E ➀ Encapsulation: molded epoxy resin ➁ NiFe; tinned surface Sn100 or gold-plated Positive pole marking Case size B (20) 3,5 ± 0,2 (,138±,008) C (30) 6,0 ± 0,3 (,236±,012) D (40) 7,3 ± 0,3 (,287±,012) E (50) 7,3 ± 0,3 (,287±,012) Dimensions in mm (inches) L W H L 2 typ. W 2 ± 0,1 ±(,004) 2,8 ± 0,2 (,110±,008) 3,2 ± 0,3 (,126±,012) 4,3 ± 0,3 (,169±,012) 4,3 ± 0,3 (,169±,012) 1,9 ± 0,2 (,075±,008) 2,5 ± 0,3 (,098±,012) 2,8 ± 0,3 (,110±,012) 4,1 ± 0,3 (,157±,012) 3,3 (,130) 5,8 (,228) 7,1 (,280) 7,1 (,280) 2,2 (,087) 2,2 (,087) 2,4 (,094) 2,4 (,094) H 2 typ. p ± 0,3 ±(,012) 1,2 (,047) 1,5 (,059) 1,6 (,062) 1,6 (,062) 0,8 (,031) 1,3 (,051) 1,3 (,051) 1,3 (,051) 67 10/02
4 Marking Case size B Case sizes C, D, E Positive pole (bar) EPCOS Manufacturer s logo Capacitance (in coded form) V Date code Rated voltage, (not coded) V R = 6,3 V is abbreviated as 6. Internal code for production (2 to 3 figures) KTA0246-I-E Positive pole (bar) EPCOS Rated voltage, (not coded) V R = 6,3 V is abbreviated as 6. Manufacturer s logo V Capacitance (in coded form) Internal code for production equipment (2 to 3 figures) Date code KTA E Capacitance coding 1st and 2nd digit 3rd digit Capacitance in pf Multiplier: 4 = 10 4 pf 5 = 10 5 pf 6 = 10 6 pf 7 = 10 7 pf Date coding Year Month M = = January 7 = July In addition to the year and month of manufacture, N = = February 8 = August the stamp includes another two or three P = = March 9 = September figures which internally allow us an assignment R = = April O = October to production equipment. S = = May N = November T = = June D = December 68 10/02
5 Overview of available types Series B45197A, tinned terminals B45198R, gold-plated terminals V R (Vdc) 6, up to 85 C C R (µf) 1) 0,47 B 0,68 B 1,0 B 1,5 B B 2,2 B B B 3,3 B B B C 4,7 B B B B C D D 6,8 B B B C B C D E D E 10 B B C B C B C C D E E 15 B B C B C C D D E 22 B C B C C D D E D E 33 B C B C C D D E D E E 47 B C B C D C D D E D E E 68 B C D C D C D E D E E 100 C D C D E D E E 150 D E D E D E 220 D E D E E 330 D E D E 470 D E E 680 E 1000 E Upon request 1) Additional ratings upon request 69 10/02
6 Technical data and ordering codes V R up to 85 C (up to 125 C) Vdc 6,3 (4) C R µf Upon request Case size tan δ max 120 Hz) I lk, max V R, 5 min) µa ESR max 1) mω Iac A Ordering code 2) Tinned terminals 10 B 0,06 0, ,29 B45197A * 15 B 0,06 0, ,33 B45197A * 22 B 0,06 1, ,35 B45197A * 22 C 0,06 1, ,54 B45197A * 33 B 0,06 2, ,35 B45197A * 33 C 0,06 2, ,56 B45197A * 47 B 0,06 3, ,41 B45197A * 47 C 0,06 3, ,58 B45197A * 68 B 0,06 4, ,41 B45197A * 68 C 0,06 4, ,52 B45197A * 68 D 0,06 4, ,93 B45197A * 100 C 0,08 6, ,86 B45197A * 100 D 0,08 6, ,10 B45197A * 150 D 0,08 9, ,22 B45197A * 150 E 0,08 9, ,28 B45197A * 220 D 0, ,22 B45197A * 220 E 0, ,28 B45197A * 330 D 0, ,22 B45197A * 330 E 0, ,28 B45197A * 470 D 0, ,0 B45197A * 470 E 0, ,28 B45197A * 680 E 0, ,28 B45197A * 1000 E 0, ,28 B45197A * 1) Other values upon request 2) Replace 197A by 198R for gold-plated terminals + Code letter for capacitance tolerance: M = ± 20 %, K = ± 10 % (J = ± 5 % upon request) * Code number for reel diameter: 9 = 180 mm, 6 = 330 mm 70 10/02
7 V R up to 85 C (up to 125 C) Vdc 10 (6,3) C R µf Case size tan δ max 120 Hz) I lk, max V R, 5 min) µa ESR max 1) mω Iac A Ordering code 2) Tinned terminals 4,7 B 0,06 0, ,24 B45197A * 6,8 B 0,06 0, ,27 B45197A * 10 B 0,06 1, ,27 B45197A * 10 C 0,06 1, ,52 B45197A * 15 B 0,06 1, ,31 B45197A * 15 C 0,06 1, ,52 B45197A * 22 B 0,06 2, ,31 B45197A * 22 C 0,06 2, ,54 B45197A * 33 B 0,06 3, ,36 B45197A * 33 C 0,06 3, ,54 B45197A * 47 B 0,08 4, ,36 B45197A * 47 C 0,06 4, ,61 B45197A * 47 D 0,06 4, ,87 B45197A * 68 C 0,06 6, ,66 B45197A * 68 D 0,06 6, ,00 B45197A * 100 C 0, ,66 B45197A * 100 D 0, ,22 B45197A * 100 E 0, ,28 B45197A * 150 D 0, ,22 B45197A * 150 E 0, ,28 B45197A * 220 D 0, ,22 B45197A * 220 E 0, ,28 B45197A * 330 D 0, ,0 B45197A * 330 E 0, ,28 B45197A * 470 E 0, ,28 B45197A * 1) Other values upon request 2) Replace 197A by 198R for gold-plated terminals + Code letter for capacitance tolerance: M = ± 20 %, K = ± 10 % (J = ± 5 % upon request) * Code number for reel diameter: 9 = 180 mm, 6 = 330 mm 71 10/02
8 V R up to 85 C (up to 125 C) Vdc 16 (10) C R µf Case size tan δ max 120 Hz) I lk, max V R, 5 min) µa ESR max 1) mω Iac A Ordering code 2) Tinned terminals 3,3 B 0,06 0, ,21 B45197A * 4,7 B 0,06 0, ,24 B45197A * 6,8 B 0,06 1, ,27 B45197A * 10 B 0,06 1, ,31 B45197A * 10 C 0,06 1, ,49 B45197A * 15 B 0,06 2, ,33 B45197A * 15 C 0,06 2, ,52 B45197A * 22 C 0,06 3, ,56 B45197A * 33 C 0,06 5, ,61 B45197A * 33 D 0,06 5, ,87 B45197A * 47 C 0,06 7, ,61 B45197A * 47 D 0,06 7, ,93 B45197A * 68 C 0, ,66 B45197A * 68 D 0, ,0 B45197A * 68 E 0, ,05 B45197A * 100 D 0, ,0 B45197A * 100 E 0, ,28 B45197A * 150 D 0, ,0 B45197A * 150 E 0, ,28 B45197A * 220 E 0, ,28 B45197A * 1) Other values upon request 2) Replace 197A by 198R for gold-plated terminals + Code letter for capacitance tolerance: M = ± 20 %, K = ± 10 % (J = ± 5 % upon request) * Code number for reel diameter: 9 = 180 mm, 6 = 330 mm 72 10/02
9 V R up to 85 C (up to 125 C) Vdc 20 (13) 25 (16) C R µf Case size tan δ max 120 Hz) I lk, max V R, 5 min) µa ESR max 1) mω Iac A Ordering code 2) Tinned terminals 2,2 B 0,06 0, ,24 B45197A * 3,3 B 0,06 0, ,26 B45197A * 4,7 B 0,06 0, ,29 B45197A * 6,8 B 0,06 1, ,29 B45197A * 6,8 C 0,06 1, ,48 B45197A * 10 B 0,06 2, ,29 B45197A * 10 C 0,06 2, ,49 B45197A * 15 C 0,06 3, ,52 B45197A * 22 D 0,06 4, ,87 B45197A * 33 D 0,06 6, ,87 B45197A * 33 E 0,06 6, ,91 B45197A * 47 D 0,06 9, ,77 B45197A * 47 E 0,06 9, ,05 B45197A * 68 D 0, ,71 B45197A * 68 E 0, ,91 B45197A * 100 E 0, ,05 B45197A * 1,5 B 0,06 0, ,24 B45197A * 2,2 B 0,06 0, ,27 B45197A * 3,3 B 0,06 0, ,27 B45197A * 4,7 B 0,06 1, ,29 B45197A * 4,7 C 0,06 1, ,46 B45197A * 6,8 B 0,06 1, ,29 B45197A * 6,8 C 0,06 1, ,47 B45197A * 10 C 0,06 2, ,49 B45197A * 15 D 0,06 3, ,81 B45197A * 22 D 0,06 5, ,81 B45197A * 22 E 0,06 5, ,85 B45197A * 33 D 0,06 8, ,81 B45197A * 33 E 0,06 8, ,91 B45197A * 47 D 0, ,77 B45197A * 47 E 0, ,91 B45197A * 68 E 0, ,91 B45197A * 1) Other values upon request 2) Replace 197A by 198R for gold-plated terminals + Code letter for capacitance tolerance: M = ± 20 %, K = ± 10 % (J = ± 5 % upon request) * Code number for reel diameter: 9 = 180 mm, 6 = 330 mm 73 10/02
10 V R up to 85 C (up to 125 C) Vdc 35 (23) 50 (33) C R µf Case size tan δ max 120 Hz) I lk, max V R, 5 min) µa ESR max 1) mω Iac A Ordering code 2) Tinned terminals 0,47 B 0,04 0, ,18 B45197A * 0,68 B 0,04 0, ,18 B45197A * 1,0 B 0,04 0, ,21 B45197A * 1,5 B 0,06 0, ,21 B45197A * 2,2 B 0,06 0, ,21 B45197A * 3,3 C 0,06 1, ,45 B45197A * 4,7 D 0,06 1, ,71 B45197A * 6,8 D 0,06 2, ,71 B45197A * 6,8 E 0,06 2, ,74 B45197A * 10 D 0,06 3, ,76 B45197A * 10 E 0,06 3, ,80 B45197A * 15 D 0,06 5, ,76 B45197A * 15 E 0,06 5, ,80 B45197A * 22 D 0,06 7, ,76 B45197A * 22 E 0,06 7, ,80 B45197A * 33 E 0, ,80 B45197A * 47 E 0, ,85 B45197A * 4,7 D 0,06 2, ,71 B45197A * 6,8 D 0,06 3, ,61 B45197A * 6,8 E 0,06 3, ,74 B45197A * 10 E 0,06 5, ,74 B45197A * 1) Other values upon request 2) Replace 197A by 198R for gold-plated terminals + Code letter for capacitance tolerance: M = ± 20 %, K = ± 10 % (J = ± 5 % upon request) * Code number for reel diameter: 9 = 180 mm, 6 = 330 mm 74 10/02
11 Herausgegeben von EPCOS AG Unternehmenskommunikation, Postfach , München, DEUTSCHLAND ( , FAX (0 89) EPCOS AG Vervielfältigung, Veröffentlichung, Verbreitung und Verwertung dieser Broschüre und ihres Inhalts ohne ausdrückliche Genehmigung der EPCOS AG nicht gestattet. Bestellungen unterliegen den vom ZVEI empfohlenen Allgemeinen Lieferbedingungen für Erzeugnisse und Leistungen der Elektroindustrie, soweit nichts anderes vereinbart wird. Diese Broschüre ersetzt die vorige Ausgabe. Fragen über Technik, Preise und Liefermöglichkeiten richten Sie bitte an den Ihnen nächstgelegenen Vertrieb der EPCOS AG oder an unsere Vertriebsgesellschaften im Ausland. Bauelemente können aufgrund technischer Erfordernisse Gefahrstoffe enthalten. Auskünfte darüber bitten wir unter Angabe des betreffenden Typs ebenfalls über die zuständige Vertriebsgesellschaft einzuholen. Published by EPCOS AG Corporate Communications, P.O. Box , Munich, GERMANY ( , FAX (0 89) EPCOS AG Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices.
Standardized R/T Characteristics. Standardized R/T characteristics. 1 Introduction
Standardized R/T characteristics 1 Introduction 1.1 Resistance value The R/T characteristics tabulated in the following have been standardized for the resistance value at 25 C. The actual resistance values
Διαβάστε περισσότεραMetallized Polyester Film Capacitors (MKT and MFT)
Metallized Polyester Film Capacitors (MKT and MFT) Plastic Case B30 B39 Standard applications Construction Dielectric: polyethylene terephthalate (polyester) Stacked-ilm technology or lead spacing and
Διαβάστε περισσότεραNTC thermistors for temperature measurement
NTC thermistors for temperature measurement SMD NTC thermistors with nickel barrier termination, case size 0603 Series/Type: Date: June 2008 EPCOS AG 2008. Reproduction, publication and dissemination of
Διαβάστε περισσότεραB37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Διαβάστε περισσότεραC4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Διαβάστε περισσότεραMultilayer Chip Capacitors C0G/NP0/CH
Multilayer Chip Capacitors C0G/NP0/CH Features Good thermal stability High insulation resistance Low dissipation factor Low inductance Applications Resonant circuits Filter circuits Timing elements Coupling
Διαβάστε περισσότεραApplications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
Διαβάστε περισσότεραDATA SHEET Surface mount NTC thermistors. BCcomponents
DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped
Διαβάστε περισσότεραSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Διαβάστε περισσότεραData sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Διαβάστε περισσότερα1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Διαβάστε περισσότεραInterference Suppression Capacitor
MOLDED BOX CONSTRUCTION, SUPPRESSION CAPACITOR, RADIAL LEAD FEATURES UL, CSA, VDE, CQC, CE, ENEC APPROVALS X2 SAFETY CAP CLASSIFICATION FOR USE IN ACROSS-THE-LINE APPLICATIONS METALLIZED POLYPROPYLENE
Διαβάστε περισσότεραThin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Διαβάστε περισσότερα± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:
TS-UP Series 85 C, 3000 hours Compact size for general purpose and industrial applications 2 and 3 pin versions available 20mm lengths for low profile applications RoHS Compliant Rated Working Voltage:
Διαβάστε περισσότεραSpecification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)
High CV-value Long Life > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life Optimized designs available on request RoHS Compliant application Basic design Smoothing, energy storage,
Διαβάστε περισσότεραNPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
Διαβάστε περισσότεραLong 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction
TS-HA/HB Series 105 C, 3000 hours Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature:
Διαβάστε περισσότεραCASE DIMENSIONS: 1.27±0.13 (0.050±0.005) A 2.54 (0.100) 1.27 (0.050) 1.27 (0.050) 1.27±0.13 (0.050±0.005) B 3.81 (0.150) 1.27 (0.050) 1.27 (0.
MARKING (White marking on black body) Polarity Stripe (+) Code Rated Voltage The T4Z HRC4000 Medical Grade series is designed for use in non-critical medical applications. The T4Z product line is based
Διαβάστε περισσότεραPPA Metallized polypropylene film capacitor MKP - Snubber/pulse - High current
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and high pulse applications
Διαβάστε περισσότεραTHICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Διαβάστε περισσότεραNPIS Shielded Power Inductors
FEATURES SHIELDED POWER INDUCTOR ULTRA LOW PROFILE (1.0 ~ 4.5mm MAX. HEIGHT) SURFACE MOUNTABLE CONSTRUCTION INDUCTANCE VALUES UP TO 220µH TAPED AND REELED FOR AUTOMATIC INSERTION CHARACTERISTICS Case Size
Διαβάστε περισσότεραSummary of Specifications
Snap Mount Large High CV High Ripple 85 C Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life for the series is 2,000 hours
Διαβάστε περισσότεραThick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MW) THICK FILM ON ALUMINA SUSTRATE,
Διαβάστε περισσότεραAluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
Διαβάστε περισσότερα+85 C General Purpose Miniature Aluminum Capacitors
+85 C General Purpose Miniature Aluminum Capacitors Features- Increased CV Efficiency Non Polar Design Available (Special Order) General Specifications- Operating Temperature: -40 to +85 C Voltage Range:
Διαβάστε περισσότεραAPPLICATIONS General medium power DC/DC convertors. CASE DIMENSIONS: millimeters (inches)
Low FEATURES Low series of robust Mn0 2 solid electrolyte capacitors CV range: 0.15-1500μF / 2.5-50V 14 case sizes available Power supply applications APPLICATIONS General medium power DC/DC convertors
Διαβάστε περισσότεραSIOV Metal Oxide Varistors Leaded Varistors (StandarD Series)
Leaded Varistors () Disk varistors StandarD series, dimensions Construction Round varistor element, leaded Coating: epoxy resin, flame-retardant to UL 94 V-0 Terminals: tinned copper wire Features Wide
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Διαβάστε περισσότεραRF series Ultra High Q & Low ESR capacitor series
RF series Ultra High Q & Low ESR capacitor series FAITHFUL LINK Features Application» High Q and low ESR performance at high frequency» Telecommunication products & equipments:» Ultra low capacitance to
Διαβάστε περισσότεραNo Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
Διαβάστε περισσότεραNTC Thermistor:TSM type
Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended
Διαβάστε περισσότεραPolymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
Διαβάστε περισσότεραCSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Διαβάστε περισσότεραAerovox Corp. Type H High Voltage AC & DC Capacitors. Film Capacitors for Power Electronics Applications. RoHS Compliant. Highlights.
H Aerovox Corp. Film Capacitors for Power Electronics Applications Specifications Outline Drawing Capacitance Range: AC Voltage Range: DC Voltage Range: Temperature Range: Capacitance Tolerance: Dissipation
Διαβάστε περισσότεραCSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Διαβάστε περισσότεραTHICK FILM CHIP RESISTOR" CAL-CHIP ELECTRONICS INC."
THICK FILM CHIP RESISTOR CAL-CHIP ELECTRONICS INC. CAL-CHIP SERIES: RM SERIES 1 2 3 INTRODUCTION SCOPE Applies to all sizes of rectangular-type fixed chip resistors with Ruthenium base as material. FEATURES
Διαβάστε περισσότεραAluminum Capacitors C, Tubular, Radial Lead
Aluminum Capacitors + 105 C, Tubular, Radial Lead FEATURES Wide temperature range Radial design in two and three lead configuration Ideal SMPS output filter PERFORMANCE CHARACTERISTICS Operating Temperature:
Διαβάστε περισσότεραMultilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Διαβάστε περισσότεραTransient Voltage Suppression Diodes: 1.5KE Series Axial Leaded Type 1500 W
Features 1. Reliable low cost construction utilizing molded plastic technique 2. Both bi-directional and uni-directional devices are available 3. Fast response time 4. Excellent clamping capacity 5. 1500
Διαβάστε περισσότεραAluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Διαβάστε περισσότεραLS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
Διαβάστε περισσότεραFP series Anti-Bend (Soft termination) capacitor series
FP series Anti-Bend (Soft termination) capacitor series Features Applications» High performance to withstanding 5mm of substrate» For general digital circuit bending test guarantee» For power supply bypass
Διαβάστε περισσότεραType 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
Διαβάστε περισσότεραOperating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
Διαβάστε περισσότεραYJM-L Series Chip Varistor
Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
Διαβάστε περισσότεραYAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.
YAGEO CORPORATION SMD INDUCTOR / BEADS CLH Series Multilayer Chip Inductors High Frequency Lead-free / For High Frequency Applications APPLICATIONS RF Resonance and Impedance Matching Circuit RF and Wireless
Διαβάστε περισσότεραThick Film Array Chip Resistor
CN Series Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Reduction of assembly costs and
Διαβάστε περισσότεραSmaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Διαβάστε περισσότεραMetal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Διαβάστε περισσότεραSMD - Resistors. Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612 official distributor of 1. Scope Thick Film Chip Resistor-SMDC Series -This specification applies
Διαβάστε περισσότερα2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Διαβάστε περισσότεραThick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512 official distributor of Thick Film Chip Resistor-SMDC Series 1. Scope -This specification applies to all
Διαβάστε περισσότεραCurrent Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
Διαβάστε περισσότεραCERAMIC DISC CAPACITOR Class II 50V,100V,500V,1KV,2KV,3KV, Hi-K Type
Features: Capacitance has non-linear temperature coefficient Large in small size Epoxy Coating for 2KV and 3KV parts (equivalent to UL94V-0 standards) RoHS Compliance Halogen free products are available
Διαβάστε περισσότεραHigh Voltage Thick Film Chip Resistor. RCV Series. Features. Applications. Construction
High Voltage Thick Film Chip Resistor High Voltage Thick Film Chip Resistor Features Highly reliable multilayer electrode construction High component and equipment reliability Excellent performance at
Διαβάστε περισσότεραLR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
Διαβάστε περισσότεραMAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
Διαβάστε περισσότεραCurrent Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Διαβάστε περισσότεραShape Square. Tolerance of Varistor Voltage For Varistor voltage<68, Special For Varistor voltage 68, 10% Lead Wire Type Straight Cut Lead
Leaded Varistor for urge uppression VP eries Operating Temp. : -40 ~ +85 FEATURE Fast response Excellent clamping ratio, high peak current and pulse energy withstanding characteristics, providing strong
Διαβάστε περισσότεραCarbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
Διαβάστε περισσότεραMetal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Διαβάστε περισσότεραCeramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Διαβάστε περισσότεραPEH C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life
PEH 169 85 C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life APPLICATION BASIC DESIGN Smoothing, energy storage, or pulse operation in telecommunication
Διαβάστε περισσότερα+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
Διαβάστε περισσότεραThick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MΩ) THICK FILM ON ALUMINA SUSTRATE,
Διαβάστε περισσότεραData sheet Thin Film Chip Inductor AL Series
Data sheet Thin Film Chip Inductor AL Series Scope - 0201 and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and
Διαβάστε περισσότεραThermistor (NTC /PTC)
ISO/TS16949 ISO 9001 ISO14001 2015 Thermistor (NTC /PTC) GNTC (Chip in Glass Thermistor) SMD NTC Thermistor SMD PTC Thermistor Radial type Thermistor Bare Chip Thermistor (Gold & silver Electrode) 9B-51L,
Διαβάστε περισσότεραFerrite Chip Beads For Automotive Use
FETURES RUGGED CONSTRUCTION IN STNDRD EI SIZES EC Q-200 QULIFIED EFFECTIVE EM/RFI SUPPRESSION UP TO 1GHz CURRENT RTINGS UP TO 2.2 MPS SHRP ND HIGH IMPEDNCES VILLE OPERTING TEMPERTURE RNGE: -55 C TO +125C
Διαβάστε περισσότεραINPAQ Global RF/Component Solutions
MCB & MHC W Series Specification Product Name Series Multilayer Chip Ferrite Bead MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516 MCB and MHC Series Chip Ferrite Bead for Automotive Applications
Διαβάστε περισσότεραThin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) RoHS Compliant includes all homogeneous
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
Διαβάστε περισσότεραFixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Διαβάστε περισσότεραSMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
Διαβάστε περισσότεραSunlord Specifications subject to change without notice. Please check our website for latest information. Revised 2018/04/15
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Διαβάστε περισσότεραMINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. Characteristics. Leakage Current(MAX) I=Leakage Current(µA) C=Nominal Capacitance(µF) V=Rated Voltage(V)
SERIES 5 C Long Life. Low impedance. (Rated Voltage 6.3~V.DC) FEATURES Load Life : 5 C 4~hours. Low impedance at khz with selected materials. SPECIFICATIONS Items Operating Temperature Range Rated Voltage
Διαβάστε περισσότεραCeramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Διαβάστε περισσότεραPb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. FEATURES The monolithic construction performs high reliability and ensures a closed magnetic flux in a component avoids magnetic and interference
Διαβάστε περισσότερα1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat (Epoxy)
ARN series Thin Film High Precision Chip Resistor Features» Advanced thin film technology» Very tight tolerance down to ±0.01%» Extremely low TCR down to ±5ppm/» Wide resistance range 1ohm-3Mega ohm» Miniature
Διαβάστε περισσότεραSurface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
Διαβάστε περισσότεραRC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
Διαβάστε περισσότεραSMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008
SMD Wire Wound Ferrite Chip Inductors - LS Series LS Series LS Series is the newest in open type ferrite wire wound chip inductors. The wire wound ferrite construction supports higher SRF, lower DCR and
Διαβάστε περισσότεραC121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]
Multilayer Chip SDV Series Operating Temp. : -55 ~+125 FEATURES SMD type suitable for high density mounting Excellent clamping ratio and quick response time (
Διαβάστε περισσότεραAnti-Sulfurated Thick Film Chip Resistor
S Series Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Special construction to prevent sulfuration in a sulfur containing
Διαβάστε περισσότεραHIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
Διαβάστε περισσότεραMCB and MHC Series Chip Ferrite Bead for Automotive Applications Qualified based on AEC-Q200
RoHS MC and MHC Series Chip Ferrite ead for Automotive Applications Qualified based on AEC-Q200 Explanation of Part Number MC 1608 W 12 1 H P - 1 2 3 4 5 6 7 8 9 1. Series Name 2. Size Code: the first
Διαβάστε περισσότεραApplication. Features
Thick Film Chip Resistor TCR Series Application Entertainment: Stereo, TV tuners, Tape recorder Appliance: Air conditioner, Refrigerator Computer & relative products: Main board, PDA Communication equipment:
Διαβάστε περισσότεραMelf Carbon Film Resistor MMC Series
Melf Resistor Melf Carbon Film Resistor MMC Series Coating color: Beige Features - Tolerance up to ±2%. - Wide resistance range:1ω to 10MΩ. Type Dimension TYPE L D C S 0102 2.00±0.10 1.30±0.10 0.55±0.10
Διαβάστε περισσότεραHigh Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
Διαβάστε περισσότεραNTC Thermistor:TTC3 Series
Features. RoHS compliant 2. Halogen-Free(HF) series are available 3. Body size: Ф3mm 4. Radial lead resin coated 5. Operating temperature range: -40 ~+25 6. Wide resistance range 7. Cost effective 8. Agency
Διαβάστε περισσότεραSAW FILTER - RF RF SAW FILTER
FEATURES - Frequencies from 0MHz to 700MHz - Custom specifications available - Industry standard package configurations - Low-loss saw component - Low amplitude ripple - RoHS compliance - Electrostatic
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Calchip s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Calchip s design provides high, excellent Q, and superior temperature stability. This highly
Διαβάστε περισσότεραNTC Thermistor:SCK Series
Features. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φmm:-40~+70
Διαβάστε περισσότερα