S :Silicon Sealed blank:no Silicon Seal 2.54/0.100" 5.05/0.199" Code 3.2/0.126" 5.7/0.224" 3.2/0.126" 7.4/0.291"
|
|
- Διώνη Παπακώστας
- 5 χρόνια πριν
- Προβολές:
Transcript
1 Specifications Acceptable Plug: φ2~φ0.30/0.021"~0.011" Dielectric Strength: AC700Vrms 1min Insulation Resistance: 1000MΩ Contact Resistance: 15mΩmax Current Rating: 1.0 A Operating Temp.: -55 ~+150 (In case of Gold plating) Materials Socket Sleeve: Brass, Gold plating over Ni Contact: Beryllium Copper,Gold plating over Ni Insulator t=mm Why Silicone Seal Option? Usable at inferior environment. Specify when you wish to maintain higher reliability by means of half-closing contact point from outside environment S :Silicon Sealed blank:no Silicon Seal Parts number: example) FSE1A-5PA-4.0 G6K2PY-8PB-5.2-S Table.1 Footprints(Top View) FSE1A-5P UF-8P /0.197" MAX /0.100" /0.100" /0.400" 2/0.300" /0.100" FS-E1A05 FS-E1A12 5/0.199" /0.100" UF-1A UF-2A UF-1T SCH-8P G6J2PY-8P 12.7/00" 8/0.200" /0.100" /0.100" /0.126" 10.6/0.417" 2.2/0.087" 2.2/0.087" 5/0.199" /0.100" SC-2A X SCH-12 GA SCH-22 G 5.7/0.224" /0.126" G6K2P-8P G6K2PY-8P /0.126" 10/0.393" 2.2/0.087" 2.2/0.087" 7.4/0.291" 8/0.200" G6J-2P-Y G6JU-2P-Y /0.100" 10/0.393" 2/0.300" 7.4/0.291" 8/0.200" G6K-2P G6K-2P-Y G6KU-2P-Y The Relay Sockets are designed based on current specifications of relays. Please contact us for the latest information. 11A1
2 Table.1 Footprints(Top View) TX25V-8P SMT1A-6P 1.3/0.051" 15.3/0.602" /0.400" /0.100" / 1/91" 2/ 0.3" / 7.5/0.295" 8/0.200" TX2-5V EC2-5NU G6S-2 G6S-2-Y / / SMT-1A DN SMT2A-8P SMT1-7P 1/91" 1/91" / 2/ 0.3" / / 2/ 0.3" / / / / / SMT-2A DN SMT-1 DN 11A2
3 Table.2 PCB thickness t(reference) Relay socket type d a Remarks B /0.270" 6.35/0.250" B 4.0/0.157" 3.5/0.138" B /0.260" - B 3.7/0.146" /0.126" A /0.260" - A 5.5/0.217" 1.63/0.064" A /0.252" - A 4.8/0.189" 3.67/0.144" B /0.250" - B 4.0/0.157" 3.5/0.138" B /0.236" - B 3.7/0.146" /0.126" B /0.205" 4.8/0.189" B 3.7/0.146" /0.126" B /0.189" - B 4.0/0.157" 3.5/0.138" B /0.173" 4.0/0.157" A 4.8/0.189" 1.67/0.066" A /0.157" /0.126" A 4.1/0.161" 1.63/0.064" A /0.130" - A 3.9/0.154" 1.63/0.064" (N0024-GG) (N0024-GG-S) (N0010-GG) (N0010-GG-S) (NSV0040-GG) (NSVS0040-GG) (NS75-GG) (NS75-SGG) (N0023-GG) (N0023-GG-S) (N0012-GG) (N0012-GG-S) (N0014-GG) (N0014-GG-S) (N0021-GG) (N0021-GG-S) (NS55-GG) (NS55-SGG) (NSV0030-GG) (NSVS0030-GG) (NSV0020-GG) (NSVS0020-GG) /0.020" /0.020" φ1.25~1.35 /0.049"~0.053" /0.020" /0.020" /0.053" (a) (0.079") d (a) (0.079") d /0.031" /0.038" φ1/0.020 /0.038 Relay socket type: A Relay socket type: B How to use PCB t PCB hole size (Reference) φ " -0 /φ0.043"-0" The Relay Sockets are designed based on current specifications of relays. Please contact us for the latest information. 11A3
4 SUX Series SUX NB-C No Socket pin (blank):silicon Sealed Socket pin inserted 17.5 N: No Silicon Seal (empty hole φ0.98) 4.6 ayout SUX NB-C SUX-4--NB-C SUX NB-C SUX-5--NB-C SUX-6A-1.6-NB-C SUX-6A--NB-C SUX-6B-1.6-NB-C SUX-6B--NB-C SUX NB-C SUX-7--NB-C SUX NB-C 1 ength SUX-8--NB-C SUX-6C-1.6-NB-C SUX-6C--NB-C qty ength SSX Series SS C (blank):silicon Sealed N: No Silicon Seal (empty hole φ0.98) 1 5 ength ayout SSU C SSE C SS C SSU C SSE C SS C SSU C SSE C SS C SSU C SSE C SS C SSU C SSE C SS C SSU C SSE C SS C SSU C SSE C SS C SSU C SSE C SS C SSU C SSE C SS C SSU C SSE C SS C SSU C SSE C SS C qty ength 11A4
5 STX Series STX (blank):silicon Sealed N: No Silicon Seal ength No Socket pin Socket pin inserted 1 ayout STU STE qty 8 ength 2SX Series 20.3 max SE-01-7 (blank):silicon Sealed N: No Silicon Seal max No Socket pin Socket pin inserted (empty hole φ0.98) 1 ength ayout 2SU SE S SU SE S SU SE S SU SE S qty ength 11A5
6 3SX Series 3S max (blank):silicon Sealed N: No Silicon Seal (empty hole φ0.98) max No Socket pin Socket pin inserted 1 ength ayout 3SU SE S SU SE S-02-8 qty 7 8 ength SG-S06-J051-GG-T005 SG-D12-J051-GG-T φ1.8 φ1.8 1 (2.63) (2.63) 5.1 φ1.3 φ1.3 4SX-NSVS0020-GG (with Silicon Seal) A6
7 SSP x6=2 φ1.25 Comtact ine SSP x8= 12.5 φ1.25 Comtact ine A7
8 SSP x6=2 φ1.25 Comtact ine SSP x8= 12.5 φ1.25 Comtact ine A7
9 G05-N0010-GG-S-H/5 G05-N0010-GG-SMT-H/5-C 8 max 8 max ( シリコンシール付 ) (with Silicon Seal) R0.49 R0.49 () φ φ G04-N0010-GG-H/5 GO4-N0010-GG-H 8 max 7.0max R0.49 () () φ1 φ1 11A8
10 SCTX Series 12.4 SCTXU SCTXE SCTX Socket NSF0010-GG NSV0020-GG NS55-GG a φb SCTX a φb (blank):silicon Sealed N: No Silicon Seal SG-D12-JSC0021-GG-T (2.6) φ φ0.7 11A9
11 4SR-03-8-A-GG- S : Silicon Sealed (blank) : No Silicon Seal 4SR-03-8-A-GG (4.2) 8 φ1 4SR-01-8-R075-GG SR-03-8-R075-GG R0.75 R SR-03-8-R075-A-GG R SR-03-8-R075-A-GG 4SR-03-8-R075-A-GG-S Socket N0014-GG N0014-GG-S φ1 11A10
12 6SR Series R SR S : Silicon Sealed (blank) : No Silicon Seal 5.5 a φb φc 6SR SR-01-8A 6SR SR SR-04-8-GG Socket NSV0030-GG NS55-GG N0012-GG NSV0020-GG N0014-GG ength a φb φc SR() Series SR- -8-GG- S : Silicon Sealed (blank) : No Silicon Seal φ1 6SR-07-8-GG N0012-GG 7.0 6SR-10-8-GG N0010-GG 6SR-11-8-GG-T Socket ength φ1 11A11
13 6SR2 Series with silicon HOw to order 6SR S S: Silicon Seal φb a φc Socket ength a φb φc 6SR2-01-8A-S NS55-SGG SR S N0012-GG-S SR Series シリコン付 SR- -8 -C-S S: Silicon Seal 5.7 a φb φc Socket ength a φb φc 6SR-03-8 NSV0020-GG SR-01-8A NS55-SGG SR-07-8 N0012-GG-S SR- -8B-C-S S: Silicon φb a φc Socket ength a φb φc 6SR-01-8B-C-S NS55-SGG SR-02-8B-C-S N0014-GG-S A12
14 2 SWX C-NSV0040-GG Blank:Silicon Seal(NSVS0040-GG) N:No Silicon Seal(NSV0040-GG) 5 (2.6) R0.49 arrangement + number of position ピン配置 SWX C-NSV0040-GG arrangement and pole number is fixed. SWX C-NSV0040-GG arrangement and pole number is fixed. 11A13
15 Relay Socket for TEEDYNE Inc,Relay RF300 RF303 series. φ8.4 P.C.D P.C.D. 8 X-φ contact point 5.4 X-φ X- C08-NS55-GG-F840 C10-NS55-GG-F840 qty-x 8 10 ayout 11A14
Shunts & Multiple Shunts. Stamped Contact DIP IC Sockets. PLCC Sockets. Jumpers. DDR DIMM Sockets SOCKETS. System CS - Technical Specifications
System - Technical Specifications Shunts & Multiple Shunts Stamped Contact DIP IC Sockets ~ ~ PLCC Sockets ~ Jumpers ~ DDR DIMM Sockets Electrical: Current/Voltage rating: 0.5A/25VAC for Single Type 0.3A/25VAC
Διαβάστε περισσότεραTerminal Contact UL Insulation Designation (provided with) style form system approval Flux tight
eatures A miniature PCB Power Relay. form A contact configuration with quick terminal type. 5KV dielectric strength, K surge voltage between coils to contact. Ideal for high rating Home Appliances of heating
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Διαβάστε περισσότεραData sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Διαβάστε περισσότερα3M-Series Miniature Pushbutton Switches
Carling Technologies MN- Snap-Action Miniature Pushbutton Switch MS- Sealed Snap-Action Miniature Pushbutton Switch Specifications Contact Rating......... refer to ordering scheme Electrical Life..........
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Διαβάστε περισσότεραCSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Διαβάστε περισσότερα38BXCS STANDARD RACK MODEL. DCS Input/Output Relay Card Series MODEL & SUFFIX CODE SELECTION 38BXCS INSTALLATION ORDERING INFORMATION RELATED PRODUCTS
DCS Input/Output Relay Card Series STANDARD RACK MODEL 38BXCS MODEL & SUFFIX CODE SELECTION 38BXCS MODEL CONNECTOR Y1 :Yokogawa KS2 cable use Y2 :Yokogawa KS9 cable use Y6 :Yokogawa FA-M3/F3XD32-3N use
Διαβάστε περισσότεραD-SUB SOLDER TYPE ORDER INFORMATION. Bestell Code/Order Code: DST (Stecker / Male) L DBU (Buchse / Female) L
D-SUB SOLDER TYPE DST (Stecker / Male) - - - L DBU (Buchse / Female) - - - L = Polzahl / No. of contacts (9,15,25,37) = Isolierkörper weiß / Insulator white L = Lötkelch / Solder Type 1 D-SUB P.C.B. STRAIGHT
Διαβάστε περισσότεραMIL-DTL Micro-D Connector R04J Series Straight to PCB Type
MIL-TL-353 Micro- onnector R4J Series Straight to P Type Specication MIL-TL-353 Micro- onnector nvironment temperature: ~ Vibration: Hz~Hz, 6m/s Random vibration: Power spectrum density.4g Hz root mean
Διαβάστε περισσότεραCSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Διαβάστε περισσότεραFeatures. Terminal Contact Enclosure style style form Open type Dust cover Ears on cover Antirotation-tab Ears on top
SONG CHUN Features 20/2 general purpose Power Relays. SPDT, DPDT, TPDT contact configurations. DC & C coils are both available. Optional for flange covers, tapped core w/anti-rotation tab, indicator lamp,
Διαβάστε περισσότεραMS SERIES MS DESK TOP ENCLOSURE APPLICATION EXAMPLE FEATURE. Measuring instruments. Power supply equipments
MS SERIES MS DESK TOP ENCLOSURE FEATURE Available in 176 sizes. Screws are not appeared on the surface. Usable as rack mount case with optinal mounting bracket. There are no ventilation hole for cover
Διαβάστε περισσότεραSurface Mount Multilayer Inductor
FETURES 0603, 0805, 0806 ND 1008 CSE SIZES HIGH CURRENT ND LOW RESISTNCE NEW "S" VERSION FOR INCRESED STURTION CURRENT UGRDED "H" VERSION FOR HIGHEST CURRENT REFLOW SOLDERING LICBLE CKGE FOR UTOMTIC ICKLCE
Διαβάστε περισσότεραCurrent Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Διαβάστε περισσότεραBMA SERIES Subminiature Blind Mate Connectors
SERIES Subminiature Blind Mate Connectors FEATURES The blindmate connectors are designed for blindmate applications up to Ghz. They have a slide-on, non-locking interface which ensures frequent matings
Διαβάστε περισσότερα0.635mm Pitch Board to Board Docking Connector. Lead-Free Compliance
.635mm Pitch Board to Board Docking Connector Lead-Free Compliance MINIDOCK SERIES MINIDOCK SERIES Features Specifications Application.635mm Pitch Connector protected by Diecasted Zinc Alloy Metal Shell
Διαβάστε περισσότεραSeries Overview *SOP (Small Outline Packages, Gullwing Leads) SMT Devices. Series IC51 (Clamshell) SOP, TSOP Type I & II
SMT evices Series Overview *SOP *SOP variations e.g. TSSOP... Series I51 (lamshell) SOP, TSOP Type I & II Insulation Resistance: 1,000MΩ min. at 500V ielectric Withstanding Voltage: 700V for 1 minute ontact
Διαβάστε περισσότεραA1253 SERIES. Specifications. Assembly layout. Ordering code. 1.25mm pitch wire to board connector A1253 T P E -A A1253 WR A SF 05P D01 A1253 H A 05P
Specifications Current rating: 1A AC,DC Voltage rating: 150V AC,DC Temperature range: -25 C ~ +85 C Contact resistance: 30mΩ Max. Insulation resistance: 500MΩ Min. Withstanding voltage: 500V AC/minute
Διαβάστε περισσότεραMIL-C-5015 Connector Series
ircular onnector --5015 onnector eries K15-228- type connector K15-228- series circular connectors are used extensively in line connections between electrical equipment,various instruments and meters.
Διαβάστε περισσότεραMAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
Διαβάστε περισσότεραThin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Διαβάστε περισσότεραMSN DESK TOP ENCLOSURE WITH STAND / CARRYING HANDLE
MSN SERIES MSN DESK TOP ENCLOSURE WITH STAND / CARRYING HANDLE W H FEATURE Available in 176 sizes. Stand / carrying handle can be adjusted in 30 degree. Maximum load is kg. There are no ventilation hole
Διαβάστε περισσότεραWEB Series. RoHS Compliant. Waterproof Miniature Circular Connector SPECIFICATION MATERIAL/FINISH WEB FEATURE
Series RoHS ompliant Waterproof Miniature ircular onnector series connectors meet the performance criteria of most factory automation applications as they are waterproof and withstand exposure to water,
Διαβάστε περισσότεραCurrent Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
Διαβάστε περισσότεραCurrent Sensing Metal Chip Resistor
eatures -SMD designed for automatic insertion -High power rating in small size -Low resistance resistor for current detection -Metal foil construction ensures high reliability and performance with very
Διαβάστε περισσότεραOperating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
Διαβάστε περισσότερα+85 C General Purpose Miniature Aluminum Capacitors
+85 C General Purpose Miniature Aluminum Capacitors Features- Increased CV Efficiency Non Polar Design Available (Special Order) General Specifications- Operating Temperature: -40 to +85 C Voltage Range:
Διαβάστε περισσότεραNMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
Διαβάστε περισσότεραCMPTER 2.92MM CONNECTORS. ... A Vital Part of Connection World. Receptacles With Accepts Pin Receptacles, Metal Through The Wall
... A Vital Part of Connection World Receptacles With Accepts Pin Receptacles, Metal Through The Wall Receptacles, Insulator Through The Wall Receptacles, Air ine Through The Wall PCB Connectors 2.92MM
Διαβάστε περισσότεραLS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
Διαβάστε περισσότεραTHICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Διαβάστε περισσότεραCL-SB SLIDE SWITCHES CL - SB B T FEATURES PART NUMBER DESIGNATION. RoHS compliant
CL-SB RoHS ompliant INTERNAL STRUCTURE 1 6 4 5 Part name Material Flammability FEATURES Cover Stainless steel (SUS 4) Slider Housing Moving ontat Fixed ontat pin Polyamido Polyphenylenesulphide Copper
Διαβάστε περισσότεραCL-SB SLIDE SWITCHES CL - SB B T FEATURES PART NUMBER DESIGNATION. RoHS compliant
CL-SB RoHS ompliant INTERNAL STRUCTURE 1 6 4 FEATURES Part name Cover Slider Housing Moving ontat Fixed ontat pin 5 Material Flammability Stainless steel (SUS 4) UL94V- Polyamido PPS UL94V- Polyphenylenesulphide
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Διαβάστε περισσότεραThin Film Precision Chip Resistor-AR Series
hin Film Precision Chip Resistor-AR Series Construction L D1 3 4 5 6 D2 9 8 7 1 2 1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat
Διαβάστε περισσότεραLR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Διαβάστε περισσότεραYAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.
YAGEO CORPORATION SMD INDUCTOR / BEADS CLH Series Multilayer Chip Inductors High Frequency Lead-free / For High Frequency Applications APPLICATIONS RF Resonance and Impedance Matching Circuit RF and Wireless
Διαβάστε περισσότεραHigh Current Chip Ferrite Bead MHC Series
High Current Chip Ferrite Bead MHC Series Features Combination of high frequency noise suppression with capability of handing high current. The current rating up to 6 Amps with low DC. Applications High
Διαβάστε περισσότεραSmaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
Διαβάστε περισσότερα4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
Διαβάστε περισσότερα1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Διαβάστε περισσότεραMelf Carbon Film Resistor MMC Series
Melf Resistor Melf Carbon Film Resistor MMC Series Coating color: Beige Features - Tolerance up to ±2%. - Wide resistance range:1ω to 10MΩ. Type Dimension TYPE L D C S 0102 2.00±0.10 1.30±0.10 0.55±0.10
Διαβάστε περισσότεραFerrite Chip Beads For Automotive Use
FETURES RUGGED CONSTRUCTION IN STNDRD EI SIZES EC Q-200 QULIFIED EFFECTIVE EM/RFI SUPPRESSION UP TO 1GHz CURRENT RTINGS UP TO 2.2 MPS SHRP ND HIGH IMPEDNCES VILLE OPERTING TEMPERTURE RNGE: -55 C TO +125C
Διαβάστε περισσότεραAT Surface Mount Package SOT-363 (SC-70) I I Y. Pin Connections B 1 C 1 E 1 E 2 C 2 B , 7:56 PM
AT-3263 Surface Mount Package SOT-363 (SC-7) I I Y Pin Connections B 1 C 1 E 1 E 2 C 2 B 2 Page 1 21.4., 7:6 PM Absolute Maximum Ratings [1] Absolute Thermal Resistance [2] : Symbol Parameter Units Maximum
Διαβάστε περισσότεραThick Film Array Chip Resistor
CN Series Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Reduction of assembly costs and
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Διαβάστε περισσότεραBulletin 1489 UL489 Circuit Breakers
Bulletin 489 UL489 Circuit Breakers Tech Data 489-A Standard AC Circuit Breaker 489-D DC Circuit Breaker 489-A, AC Circuit Breakers 489-D, DC Circuit Breakers Bulletin 489-A Industrial Circuit Breaker
Διαβάστε περισσότεραFig. 4 Pin Pricing. Molex
Plug 7.. Features:...... 7....8 7. Toy Car attery Connector Socket. mp current rating per circuit 00V voltage rating ~ 0WG wire range Nylon / housing 9V- Industry standard product for radio controlled
Διαβάστε περισσότεραCurrent Sensing Chip Resistor
Features -3 atts power rating in 1 att size, 1225 package -Low CR of ±100 PPM/ C -Resistance values from 1m to 1 ohm -High purity alumina substrate for high power dissipation -Long side terminations with
Διαβάστε περισσότεραDEUTSCH RR Series Filter Connectors MIL-DTL SERIES 2
DUTSCH ilter Connectors DUTSCH RR Series ilter Connectors MIL-DTL-2642 SRIS 2 DUTSCH RR Series connectors are medium-density, MIL-DTL-2642 Series 2 circular connectors using a bayonet coupling with visible
Διαβάστε περισσότεραCMPTER SMA CONNECTORS. ... A Vital Part of Connection World
... A Vital Part of Connection World Receptacles With Accepts Pin Receptacles Metal Through The Wall Receptacles Insulator Through The wall Receptacles Air ine Through The wall Receptacles With Tap Receptacles
Διαβάστε περισσότεραSERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES) (8) 95-8365 venkel.com Features: RoHS Compliant and Halogen Free Good Q values High SRF range: 1nH to 47uH Tolerance: ±.2nH, ±.3nH, ±2%, ±5%, ±1% High
Διαβάστε περισσότερα10.16mm PITCH TERMINAL CONNECTOR 4.34(0.171) 3.5(0.138) 9.5(0.374) 19.5(0.768) 3(0.118) 7.085(0.279) 8.485(0.334) 21(0.827) 14(0.
7010 SRIS 10.16mm PITH TRMINL ONNTOR 4.345 (0.171) 3.5 (0.138) 19.5(0.768) 9.5 (0.374) 4.34(0.171) Ref. 10.585(0.417) Ref. 1.9(0.075) Ref. 2.2(0.087) ORR O 7010 160 : RoHS ompliance ontact name 160 : Receptacle
Διαβάστε περισσότεραFT-63 SINGLE TURN CERMET TRIMMERS. F T E T V 5 k Ω ( ) FEATURES PART NUMBER DESIGNATION
SINGLE TURN FT-6 RoHS compliant INTERNAL STRUCTURE 4 5 8 6 FEATURES 4 5 6 8 Part name Housing Rotor Wiper O ring Resistive element Terminal pin Adhesive Base element Electrode Material PBT Polybutyleneterephthalate
Διαβάστε περισσότεραTrimmable Thick Film Chip Resistor
rimmable hick ilm Chip Resistor R Series rimmable hick ilm Chip Resistor Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. eatures
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Διαβάστε περισσότεραType 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
Διαβάστε περισσότεραSMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)
Marking Outline: Low DCR, high rated current. Magnetic shielded structure Lead free product, RoHS compliant. RoHS Carrier tape packing, suitable for SMT process. SMT Widely used in buck converter, laptop,
Διαβάστε περισσότεραPhotomultiplier Tube Assemblies
hotomultiplier Tube Assemblies hotomultiplier Tube Assemblies hotomultiplier tube assemblies are made up of a photomultiplier tube, a voltagedivider circuit and other components, all integrated into a
Διαβάστε περισσότεραCarbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
Διαβάστε περισσότερα+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
Διαβάστε περισσότεραE62 AC Series Features
E62 AC Features Perfect for non-sinusoidal s and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated overpressure
Διαβάστε περισσότεραXKT. Metal Oxide Varistor FEATURES
FEATURES Operating Temperature Range: -40 ~+105 Body Diameters Range From 5D to 20D Wide Operating from 18V to 1800V Full compliance with RoSH and REH DIMENSION L:16mm min SIZE D MAX H MAX d+-0.05 E c
Διαβάστε περισσότεραPhotomultiplier Tube Assemblies
hotomultiplier Tube Assemblies hotomultiplier Tube Assemblies hotomultiplier tube assemblies are made up of a photomultiplier tube, a voltagedivider circuit and other components, all integrated into a
Διαβάστε περισσότεραINPAQ Global RF/Component Solutions
MCB & MHC W Series Specification Product Name Series Multilayer Chip Ferrite Bead MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516 MCB and MHC Series Chip Ferrite Bead for Automotive Applications
Διαβάστε περισσότεραElectrical Specifications at T AMB =25 C DC VOLTS (V) MAXIMUM POWER (dbm) DYNAMIC RANGE IP3 (dbm) (db) Output (1 db Comp.) at 2 f U. Typ.
Surface Mount Monolithic Amplifiers High Directivity, 50Ω, 0.5 to 5.9 GHz Features 3V & 5V operation micro-miniature size.1"x.1" no external biasing circuit required internal DC blocking at RF input &
Διαβάστε περισσότεραDC-DC converter circuits for mobile phones, wearbale devices, DVCs, HDDs, etc.
Multilayer Chip Power Inductor MPH Series Operating Temp. : -40 ~+85 FEATURES Higher DC bias current and lower DC resistance due to Trench Technology Low profile and thin thickness Monolithic structure
Διαβάστε περισσότεραMCB and MHC Series Chip Ferrite Bead for Automotive Applications Qualified based on AEC-Q200
RoHS MC and MHC Series Chip Ferrite ead for Automotive Applications Qualified based on AEC-Q200 Explanation of Part Number MC 1608 W 12 1 H P - 1 2 3 4 5 6 7 8 9 1. Series Name 2. Size Code: the first
Διαβάστε περισσότεραRoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. PRODUCT DETAIL Electrical Characteristics μh L (Min) Q MHz (Min) SRF Ω DCR IDC ma TEST FREQ: MHz TEST LEVEL: 100 mv Test Instruments HP4291
Διαβάστε περισσότεραB37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Διαβάστε περισσότεραThermistor (NTC /PTC)
ISO/TS16949 ISO 9001 ISO14001 2015 Thermistor (NTC /PTC) GNTC (Chip in Glass Thermistor) SMD NTC Thermistor SMD PTC Thermistor Radial type Thermistor Bare Chip Thermistor (Gold & silver Electrode) 9B-51L,
Διαβάστε περισσότεραALUMINUM ELECTROLYTIC CAPACITORS LKG
Lug / Snap-in Terminal Type, For Audio Equipment Disigned for high grade audio equipment, giving priority to high fidelity sound quality. The variation expansion of the. TYPE-: The low profile high tone
Διαβάστε περισσότεραData Sheet. Customer: Current Sensing Thick Film Chip Resistor - RS Series Size: 0402/0603/0805/1206/1210/2010/2512. Accepted by (QC) Approved by
Data Sheet Customer: Product: Current Sensing Thick Film Chip Resistor - RS Series Size: 0402/0603/0805/1206/1210/2010/2512 Issued Date: 01-Jun-10 Edition: REV.A5 Produced by Checked Approved by Prepared
Διαβάστε περισσότεραApplications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
Διαβάστε περισσότεραFerrite Chip Inductor
FTURS SURFC MOUNT CS SIZS (0402 ~ 1206) DURL MULTILYR CONSTRUCTION MGNTICLLY SHILDD TP & RL PCKGING FOR UTOMTIC INSRTION OTH FLOW ND RFLOW SOLDRL Pb-FR/RoHS COMPLINT SPCIFICTIONS Case NFI04 NFI06 NFI08
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Διαβάστε περισσότεραStamped contacts Crimp male contacts diameter 1,6 mm for wire gauge AWG silver plated Part No. VN (1) Contact Stamped contacts
Stamped contacts Crimp male contacts diameter 1,6 mm for wire gauge AWG - 16 silver plated VN 01 016 0002 ( Series Subseries Contacts Contact Stamped contacts Common Characteristics Contact diameter 1,6
Διαβάστε περισσότεραInterference Suppression Capacitor
MOLDED BOX CONSTRUCTION, SUPPRESSION CAPACITOR, RADIAL LEAD FEATURES UL, CSA, VDE, CQC, CE, ENEC APPROVALS X2 SAFETY CAP CLASSIFICATION FOR USE IN ACROSS-THE-LINE APPLICATIONS METALLIZED POLYPROPYLENE
Διαβάστε περισσότεραSeries of Wafer Check Valves Design:API 594, API 6D
Wafer Check Valves Series of Wafer Check Valves Design:API 594, API 6D Dual-Plate Wafer Check Valve : Type:C1 Dual-Plate Wafer Check Valve for by-pass Type:C2 Dual-Plate Double-Flanged Check Valve : Type:C3
Διαβάστε περισσότεραAluminum Capacitors C, Tubular, Radial Lead
Aluminum Capacitors + 105 C, Tubular, Radial Lead FEATURES Wide temperature range Radial design in two and three lead configuration Ideal SMPS output filter PERFORMANCE CHARACTERISTICS Operating Temperature:
Διαβάστε περισσότεραSunlord 1R0. Operating FEATURES. low loss. Feature Type MWSA. Nominal Inductance Nominal Value. Example R R0. 1.0μH
Moldedd SMD Power Inductors MWS Series Operating Temp. : -40 ~+125 (Including self-heating) FETURES Metal material for larg ge current and low loss Closed magnetic circuit design reduces leakage flux Halogen
Διαβάστε περισσότεραSpecifications. Potentiometer 2 Watt, 1/4 dia. shaft
Gold plated terminals and housing Meets or exceeds specifications of MI R 94 QP isted Potentiometer 2 Watt, 1/4 dia. shaft ength g KU5001S28 501 0001 RV4NAYSD500A 50 7/8 P1 KU1011S28 501 0002 RV4NAYSD101A
Διαβάστε περισσότεραSMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
Διαβάστε περισσότεραDatasheet. MIL-DTL series III circular electrical connector / 18
Datasheet MIL-DTL-38999 series III circular electrical connector 1 / 18 MIL-DTL-38999 series III circular electrical connector Brief introducing how to order Outline dimension Rear accessory Characteristic
Διαβάστε περισσότεραRF series Ultra High Q & Low ESR capacitor series
RF series Ultra High Q & Low ESR capacitor series FAITHFUL LINK Features Application» High Q and low ESR performance at high frequency» Telecommunication products & equipments:» Ultra low capacitance to
Διαβάστε περισσότεραSMD - Resistors. Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612 official distributor of 1. Scope Thick Film Chip Resistor-SMDC Series -This specification applies
Διαβάστε περισσότεραACTORS IEC CONT Ex9C
IEC CONTCTORS Ex9C Ex9C Product Overview Features C-3 contactor ratings from 630 and C-1 contactor ratings to 800 voltages from 24~600, 50/60 Hz Full Non-Reversing (FVNR) and Full Reversing (FVR) 5 k @
Διαβάστε περισσότεραMMCX SERIES Microminiature Coaxial Connectors
SERIES Microminiature Coaxial Connectors FEATURES connectors are smaller than MCX connectors and are used from DC up to 6 GHz in applications where a tiny size is crucial. INTERFACE MATING DIMENSIONS PLUG:
Διαβάστε περισσότεραThick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512 official distributor of Thick Film Chip Resistor-SMDC Series 1. Scope -This specification applies to all
Διαβάστε περισσότεραAPPLICATIONS TECHNOLOGY. Leaded Discs N.03 N.06 N.09
NC Disc hermistors ND 03/06/09 NE 03/06/09 NV 06/09 APPLICAIONS ND or NE: Commerical, Industrial and Automotive Applications AEC-Q200 Qualified NV: Professional Applicationsl Alarm and temperature measurement
Διαβάστε περισσότεραSMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
Διαβάστε περισσότεραNKT NTC Thermistor. Negative Temperature Coefficient Thermistor FEATURES
FEATURES Large, strong capacity of suppression of inrush current Big material (B value), small residual Small size, Long life, high reliability and fast response APPLICATIONS Switching -supply, switch,
Διαβάστε περισσότεραSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Διαβάστε περισσότεραAL Series - Thin Film Chip Inductor
Features A Photo Lithographic Single Layer Ceramic Chip High SRF, Excellent, Superior Temperature Stability Tight Tolerance of ± % or ±.nh Self Resonant Frequency Controlled within % Stable Inductance
Διαβάστε περισσότεραNPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
Διαβάστε περισσότεραCeramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Διαβάστε περισσότεραSPECIFICATIONS... Pag. 2. WIRE SOLDER... Pag. 3. PCB SOLDER... Pag HIGH VOLTAGE PCB SOLDER... Pag. 6. RIGHT ANGLE PCB... Pag.
DIN 41618 & 41622 INDEX DIN 41618 SPECIFICATIONS.......................................................... Pag. 2 WIRE SOLDER............................................................ Pag. 3 PCB SOLDER.............................................................
Διαβάστε περισσότεραCEMENT FIXED RESISTORS
Self extinguishing Excellent flame and moisture resistance Extremely small sturdy and mechanically safe Non-inductive types available for all Royal Ohm Cement Types Too low or too high ohmic values on
Διαβάστε περισσότερα