Photomultiplier Tube Assemblies
|
|
|
- Θεοδόσιος Βλαχόπουλος
- 5 χρόνια πριν
- Προβολές:
Transcript
1 hotomultiplier Tube Assemblies hotomultiplier Tube Assemblies hotomultiplier tube assemblies are made up of a photomultiplier tube, a voltagedivider circuit and other components, all integrated into a single case. Type No. Assembly Dia. (mm) MT Dia. mm (inch) Built-in MT TACC0 Curve Code Wavelength (nm) Outline No. Dynode Structure / Stages Max. Rating Anode to Cathode Voltage Max. (V) Divider Current Max. (ma) Anode to Cathode Supply Voltage (V) Cathode Sensitivity Blue Sensitivity Luminous Index (CS -8) Typ. Typ. (µa/lm) H6- H69- H6- H6 H6 H66 H6-0 H6 H H8- H89-0 H99- H6 H9 H- H66-0 H69 H6 H68 H9-0 H8 H8-0 H6B H6B-0 H60-0 H8C H9 H966A (/8) (/8) (/) 9 (/) 9 (/) 9 (/) () () 8 (-/8) 8 (-/) 8 (-/) () () () () () 6 () () () M M M M M M M6 0 0S U 60 to 6 8 to 6 0 to 0 to 0 to 0 to HB-0 0U-0-L6 0 MC/ CAUTION: hotomultiplier tube assemblies listed in this catalog are not designed for use in a vacuum, please consult our sales office. When using them in a vacuum or under low pressure conditions, please consult us. 8 q w e r t y u L/8 L/8 L/ L/ L/ L/8 M/ L/ L/ L/ M/9 L/ L/ L/ L/8 M/9 L/ L/ L/ MC/ MC/ MC/ MC/ MC/ MC/ MC/ MC/ MC/
2 Luminous Typ. (A/lm) ain Typ. Dark Current Typ. (na) Anode Characteristics Max. (na) Time Response ulse Linearity Rise Time Transit Time Transit Time Spread % % Notes Type No. Typ. Typ. Typ. Typ. Typ. (ns) (ns) (ns) (ma) (ma) H6- (with Ω) H H69- (with Ω) H H6- (with Ω) H H6-0 (with Ω) H H6-0 (with Ω) H H66-0 (with Ω) H H H66 () H H-0 (with Ω) H6 (06) H H H H- (09) H H6 (6) H6 () H H H8- () H H H H H /ch /ch 8 Linearanode H /ch /ch 0. 0./ch 6 Multianode H8- (Taper Divider Type) H8.0 /ch /ch 0. 0./ch H /ch /ch.0 0./ch 0.6/ch 6 Multianode H6B.0 0./ch /ch.0 0./ch 0.6/ch H6B /ch /ch /ch /ch Linearanode H60A-0 ( Cable Input Type) H8C-0 (UV rass Type) H8D (HV in Input Type) H60-0 H8C /ch /ch 0./ch H9-0 (UV rass Type) H /ch /ch H966B (HV in Input Type) H966A.0 6 /ch 0.6. /ch 6 Linearanode HB-0 9
3 hotomultiplier Tube Assemblies Dimensional Outlines and Diagrams (Unit: mm) q H6-. ± MIN. w H69-. ± 0. 8 MIN. 9.0 ±..0 ±..6 ± 0. MT: 6 MANETIC SHIELD (t=0. mm) WITH HEAT SHRINABLE TUBE OTTIN COMOUND * 0 to : kω to : 0.0 µ * IS CONNECTED TO INSIDE O THIS RODUCT. 9.0 ±..0 ±..6 ± 0. MT: 96 MANETIC SHIELD (t=0. mm) WITH HEAT SHRINABLE TUBE OTTIN COMOUND * 0 to : kω to 0 : kω to : 0.0 µ * IS CONNECTED TO INSIDE O THIS RODUCT. TMHA09EC TMHA0EC e H6- r H6. ± 0.6 MIN.. ± ± 0. MIN. 6.0 ±.0 ±. ± 0. MT: -0 MANETIC SHIELD (t=0. mm) WITH HEAT SHRINABLE TUBE OTTIN COMOUND * 0 0 to : kω to : 0.0 µ * IS CONNECTED TO INSIDE O THIS RODUCT..0 ± 88 ± MT: 66 CASE (t=0. mm) OTTIN COMOUND 0 0 to to : kω : kω : 0.0 µ * TO MANETIC * IS CONNECTED TO INSIDE O THIS RODUCT. TMHA0EC TMHA0EB t H6 y H66. ± ± 0. MIN.. ± ± 0. MIN..0 ± 88 ± MT: CASE (t=0. mm) OTTIN COMOUND 0 0, to to : 6 kω : kω : kω : 0.0 µ * TO MANETIC.0 ± 6 ± MT: 8 CASE (t=0. mm) OTTIN COMOUND 0, to to : MΩ : kω : 60 kω : kω : kω : 0.0 µ * TO MANETIC * IS CONNECTED TO INSIDE O THIS RODUCT. * IS CONNECTED TO INSIDE O THIS RODUCT. TMHA0EA TMHA0EB
4 -0 u H6-0 i H6.0 ± ± 0..8 ± 0.. MIN. MT: -0 OM CASE OTTIN COMOUND (SILICONE & EOXY) OUTUT : R-/U (BLAC) : SHIELD CABLE (RED) to : kω 8, : MΩ 9 to : Ω : kω : kω to : 0.0 µ, : 0.00 µ * HIH VOLTAE SHIELDED CABLE CAN BE TMHA00EA.0 ± ±.0 ± 0. 6 ± 0 MIN. MT: 998 (H6) (H66) OTTIN COMOUND 0 ACC ,, 9: kω, to, to : kω : kω, 8: kω, : 0 kω : 0 kω 0 to : Ω to : 0.0 µ : 0.0 µ * IS CONNECTED TO INSIDE O THIS RODUCT. TMHA0EB o H!0 H8-.0 ± 8 ±.0 ± 0. ± 0. MIN. MT: (H) 06 (H6) CASE (t=0. mm) OTTIN COMOUND 6 0 0, : kω : 0 kω : kω, to : kω to 6 : Ω to : 0.0 µ * TO MANETIC * IS CONNECTED TO INSIDE O THIS RODUCT. TMHA08EB 6.0 ± OUTUT.0 ± 0. 9 ± MIN. 0 MT: (H8-) -* (H8-6) 0 * - has a plano-concave face plate. *, 0, : 0 kω to, : kω : kω : 0 kω : kω : kω : Ω : kω : 0.0 µ : 0.0 µ : 0.0 µ : 0. µ : 00 p ** IS CONNECTED TO INSIDE O THIS RODUCT. TMHA0EB! H89-0! H99-.0 ± ± +.0 ± 0. 9 ± MIN. MT: 6-0 OM CASE OTTIN COMOUND (SILICONE & EOXY) * HIH VOLTAE SHIELDED CABLE CAN BE : SHIELD CABLE (RED) to : kω, 8 : MΩ to : Ω 6 : kω : kω to : 0.0 µ, : 0.00 µ TMHA06EA.0 ± 0. OUTUT.0 ±. 6 MIN. A C MT: 88-0 (H99-) 8 09 (H-) 0 00 (H-) 0 Acc * IS CONNECTED TO INSIDE O THIS RODUCT.,,, to, to 6 8 to 0 to C9 0 : kω : 60 kω : 00 kω : 0 kω : Ω : kω : 0.0 µ : 0.0 µ : 0.0 µ : 0.0 µ : 0 p TMHA06EC 8
5 hotomultiplier Tube Assemblies Dimensional Outlines and Diagrams (Unit: mm)! H6! H ± 0. OUTUT.0 ±. 6 MIN MT: 9-0 (H6) (H6) 0 6 (H6) SH, : kω, 0, 6 : 0 kω, : kω, to,, 8 : kω,, : 0 kω, : 60 kω 9 : Ω 0, : Ω : kω : 0.0 µ : 0.0 µ : 0. µ : 0. µ : 0. µ : 0 p * IS CONNECTED TO INSIDE O THIS RODUCT. ± DYNODE OUTUT ANODE OUTUT ANODE OUTUT.0 ±. 6 MIN. DY A A MT: HV , : kω to, to 9 : kω,, to, 6, 0, : kω, : 60 kω : Ω, : Ω : 0 p : 0.0 µ : 0.0 µ : 0. µ : 0. µ : 0. µ : 0.0 µ ANODE OUTUT ANODE OUTUT DYNODE OUTUT * IS CONNECTED TO INSIDE O THIS RODUCT. TMHA0EB TMHA0EB! H-!6 H ± OUTUT.0 ±. 6 MIN. MT: 08 (H-) (H8-) 6 0 ACC : kω, : kω,, : 0 kω : 99 kω, 6 : 60 kω : 6 kω to : 0 kω : kω : kω : Ω : 00 p, : 00 p : 0.0 µ, : 0.0 µ : 0.0 µ, C9 : 0 p C9 * IS CONNECTED TO INSIDE O THIS RODUCT ± 9 MIN. MT: 9-0 LIHT SHIELD STEM OM CASE AL ANEL : SHIELD CABLE (RED) to : kω, 9 : MΩ to 6 : Ω : kω 8 : kω to : 0.0 µ, : 0.00 µ * HIH VOLTAE SHIELDED CABLE CAN BE 8 TMHA0EB TMHA0EA
6 ! H69!8 H6, H68.0 ± 8 ± ± OUTUT 8 ±.0 ±. 6 MIN. 0 ± MT: SH, : kω, 0, 6 : 0 kω, : kω, to,, 8 : kω,, : 0 kω, : 60 kω 9 : Ω 0, : Ω : kω : 0.0 µ : 0.0 µ : 0. µ : 0. µ : 0. µ : 0 p * IS CONNECTED TO INSIDE O THIS RODUCT. 6 ± 6 9 ± ± 6 ± MIN. H6=lat window, Borosilicate H68=Curved window, UV glass MT: (H6) 8 (H68) BLAC TAE SOCET ASSY HOUSIN , : kω : 60 kω : kω : kω : kω to : kω, : kω 6 : 0 kω 8 : Ω 9, 0 : Ω : kω : 0.0 µ : 0.0 µ : 0. µ : 0. µ : 0. µ : 0 p OUTUT TMHA0EA TMHA0EA!9 H8, H8-0, H8-, H ± =. MOUNTIN THREADED HOLE (M DETH: ) 8 6 M MAX. L INUT TERMINAL ( 0.6) INUT TERMINAL ( 0.6) 6 ANODE # to #8 OUTUT ( 0.6) TO VIEW.0 ± UIDE MARS 0. X 0.6 Y UIDE MARS MT: 600-M6 SERIES TERMINAL INS ANODE OUTUT ANODE OUTUT ANODE8 OUTUT TERMINAL INS ANODE9 OUTUT ANODE OUTUT ANODE6 OUTUT TERMINAL INS OUTUT TERMINAL INS INUT. 6.0 ± TY..0 ± to, : 0 kω : kω : 00 kω 0 to : Ω to : 0.0 µ AIN ADJUSTMENT CIRCUIT * 0 SB 0 ACTIVE VOLTAE DIVIDER * ain on each channel is preset at the factory. It is prohibited to adjust gain with this circuit at user side - ANODE - ANODE - ANODE - ANODE - ANODE -6 ANODE6 - ANODE -8 ANODE8.0 ±.8. =.8 MAX... -SCREWS (M) ANODE OUTUT TERMINAL IN ( 0.6,. ITCH 8 ).08 6 DY ANODE SIZE (X) (Y). mm. mm. mm. mm. mm. mm. mm. mm. OM CASE.6 Dy OUTUT TERMINAL IN ( 0.6). INUT TERMINAL INS ( 0.6) ANODE,,, 6,,,, 8, 9, 6,,, Dy Dy Dy Dy9 Dy8 Dy Dy6 Dy Dy Dy Dy Dy to : 60 kω to : kω : MΩ to : Ω 8: kω to : 0.0 µ TMHA08EC TMHA08ED 8
7 8 DY 6 HV.. hotomultiplier Tube Assemblies Dimensional Outlines and Diagrams (Unit: H6B, H6B-0, H6B-, H60-0, H60-, H TO VIEW - 0. UIDE MARS 0. TERMINAL INS (. mm-itch, 0.6, 8 8) ANODE OUTUT ANODE OUTUT ANODE6 OUTUT ANODE6 OUTUT Dy OUTUT TERMINAL IN ( 0.6) TERMINAL IN ( 0.6) TERMINAL IN ( 0.6).0 ± 0..0 ± 0..8 ANODE # ANODE # 6 LINE. ITCH ANODE OUTUT ANODE OUTUT ANODE OUTUT ANODE OUTUT 0 OUTUT TERMINAL IN INUT TERMINAL IN.0 ±.. 9=.86 MAX.. -SCREWS (M). Dy OUTUT TERMINAL IN ( 0.6).0 ± 0.. =.8. MT: 600-M6 SERIES OM CASE INUT TERMINAL INS ( 0.6) ANODE OUTUT TERMINAL INS ( 0.6,. ITCH 8 8) TERMINAL IN ( 0.6) Dy 8 Dy Dy Dy9 Dy8 Dy Dy6 Dy Dy Dy Dy Dy 0 6 0, to : kω to, : 00 kω 6 : 0 kω to 9 : Ω 0 : kω : MΩ to : 0.0 µ : 0.0 µ TERMINAL IN ( 0.6) Typ..0 ± 0... ANODE #. ANODE #. = OUTUT IN ( 0.) ANODE # DY OUT A-ANODE - A A-ANODE - A ANODE # ANODE # to # OUTUT ( 0.6) (6IN LINE. ITCH) HOUSIN (OM) TERMINAL IN ( 0.) INUT TERMINAL ( 0.) 0 SHIELD SHIELD 0 ACTIVE VOLTAE DIVIDER to : 0 kω, : Ω 0 : MΩ : kω to : 0.0 µ DIVIDER CURRENT: 0. ma (at -0 V) TMHA088EC TMHA0EC H = ±.0. ± 0.9 START MAR 6. ± ± 0. (EECTIVE AREA) = INSULATIN TAE LASTIC BASE C BOARD 0. =.0 ± 0. ± 0 6 TO VIEW NOTE *A: Suitable sockets for the signal connectors will be attached. The equivalent socket is SQT-8-0-L-D (SAMTEC). As it doesn't have a polarized position marker, : SHV- it can be used at any positions. 8 =6. ± 0. H8 DY, 6, 6 8, 6, 6,, 6 6,,,, 6, 60, 9,,,, 8,,, 9, 9,, M DETH. - CONNECTOR * A TMM-8-0--D, mfg. SAMTEC 6 6. SEARATION MAR ON OCUSIN ELECTRODE START MAR =.6 CA HOUSIN (OM) SOCET HOUSIN (OM) BASE (OM) INSULATIN TAE 6.0 ± 0. (EECTIVE AREA) 9 : SHV =.6. ± 0. - CONNECTOR 9. ± 0.9 ; QTE-0-0--D-A, SAMTEC ( mm ITCH. DOUBLE ROW 6. ± 0.9 WITH INTERAL LATE) TO VIEW MAX. M DETH: R R C9 SHV- to : 0 kω 6 to 8: Ω 9: kω 0: MΩ, :.99 kω : 0.0 µ : 0.0 µ : 0.0 µ : 0.00 µ, C9: 0.00 µ DIVIDER CURRENT µa at - V TRANSISTOR CIRCUIT OUTUT ANODE OUTUT () ANODE OUTUT () ANODE OUTUT () (9 to 6)... (9 to 6)... ANODE OUTUT () ANODE OUTUT () ANODE OUTUT (6) ANODE OUTUT () ANODE OUTUT (8) ANODE OUTUT () ANODE OUTUT (8) ANODE OUTUT (9) ANODE OUTUT (60) ANODE OUTUT (6) ANODE OUTUT (6) -(DOUBLE-ROW mm itch) CONNECTOR ANODE OUTUT (6) ANODE OUTUT (6) SHV- ACTIVE VOLTAE DIVIDER to : 0 kω (± %, 0. W) 6 to 8: Ω (± %, 0. W) 9: kω (± %, 0. W) 0: MΩ (± %, 0. W), :.99 kω (± %, 0. W), : 0.0 µ (00 V) : 0.0 µ (00 V) : 0.0 µ (00 V) : 0.00 µ ( kv) DIVIDER CURRENT µa at - V OUTUT ANODE OUTUT () ANODE OUTUT () ANODE OUTUT () ANODE OUTUT (6) ( to )... ( to ) ANODE OUTUT () ANODE OUTUT () mm ITCH HEADER (/N QTE-0-0--D-A, SAMTEC) ANODE OUTUT () ANODE OUTUT (6) 8 TMHA0EA TMHA0EB
8 @ H966A START MAR. ±.0.8 ± ± 0.. =6. ± = ± 0. (EECTIVE AREA) 9 0. =.0 ± 0. 6 DY,6, 6 8, 6, 6,, 6 6,,,, 6, 60, 9,,,, 8,,, 9, 9,, = INSULATION TAE LASTIC BASE C BOARD ± 0 M DETH. - CONNECTOR TMM-8-0--D, mfg. SAMTEC TO VIEW : SHV R C9 TRANSISTOR CIRCUIT SHV- to : 0 kω 6 to 8: Ω 9: kω 0: MΩ, :.99 kω : 0.0 µ : 0.0 µ : 0.0 µ : 0.00 µ, C9: 0.00 µ DIVIDER CURRENT µa at - V OUTUT ANODE OUTUT () ANODE OUTUT () ANODE OUTUT () (9 to 6)... (9 to 6)... ANODE OUTUT () ANODE OUTUT () ANODE OUTUT (6) ANODE OUTUT () ANODE OUTUT (8) ANODE OUTUT () ANODE OUTUT (8) ANODE OUTUT (9) ANODE OUTUT (60) ANODE OUTUT (6) ANODE OUTUT (6) -(DOUBLE-ROW mm itch) CONNECTOR ANODE OUTUT (6) ANODE OUTUT (6) HB-0.0 ITCH HOTO- CATHODE.0 ± 0. 6 ANODE OUTUT TERMINAL IN (BDL-8--, Mfg. SAMTEC) ± 0. MAX. ANODE OUTUT -SCREW (M). =.8 TO VIEW 6 ANODE OUTUT ANODE OUTUT MT INSULATION TAE OM CASE INUT TERMINAL IN ( 0.6) ANODE # to #6 OUTUT ( 0.6) INUT TERMINAL IN ( 0.6) ACTIVE VOLTAE DIVIDER 6 to : 0 kω : MΩ to : Ω DIVIDER CURRENT: 0. ma (at -0 V) TERMINAL IN INUT TERMINAL IN TMHA0JA 8
Photomultiplier Tube Assemblies
hotomultiplier Tube Assemblies hotomultiplier Tube Assemblies hotomultiplier tube assemblies are made up of a photomultiplier tube, a voltagedivider circuit and other components, all integrated into a
First Sensor Quad APD Data Sheet Part Description QA TO Order #
Responsivity (/W) First Sensor Quad PD Data Sheet Features Description pplication Pulsed 16 nm laser detection RoHS 211/65/EU Light source positioning Laser alignment ø mm total active area Segmented in
Si Photo-transistor Chip TKA124PT
Si Photo-transistor ChipTKA124PT Ambient Light Sensor 1. Scope The specification applies to NPN silicon photo-transistor chips. TypeTKA124PT-L-8-N. (Ambient Light) 2. Structure NPN planar type. 3. Size
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
SMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)
Marking Outline: Low DCR, high rated current. Magnetic shielded structure Lead free product, RoHS compliant. RoHS Carrier tape packing, suitable for SMT process. SMT Widely used in buck converter, laptop,
NMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
RSDW08 & RDDW08 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (Typ.) CAPACITOR LOAD (MAX.) RSDW08F-03 344mA 3.3V 2000mA 80% 2000μF RSDW08F-05
Trimmable Thick Film Chip Resistor
rimmable hick ilm Chip Resistor R Series rimmable hick ilm Chip Resistor Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. eatures
MS SERIES MS DESK TOP ENCLOSURE APPLICATION EXAMPLE FEATURE. Measuring instruments. Power supply equipments
MS SERIES MS DESK TOP ENCLOSURE FEATURE Available in 176 sizes. Screws are not appeared on the surface. Usable as rack mount case with optinal mounting bracket. There are no ventilation hole for cover
MSN DESK TOP ENCLOSURE WITH STAND / CARRYING HANDLE
MSN SERIES MSN DESK TOP ENCLOSURE WITH STAND / CARRYING HANDLE W H FEATURE Available in 176 sizes. Stand / carrying handle can be adjusted in 30 degree. Maximum load is kg. There are no ventilation hole
38BXCS STANDARD RACK MODEL. DCS Input/Output Relay Card Series MODEL & SUFFIX CODE SELECTION 38BXCS INSTALLATION ORDERING INFORMATION RELATED PRODUCTS
DCS Input/Output Relay Card Series STANDARD RACK MODEL 38BXCS MODEL & SUFFIX CODE SELECTION 38BXCS MODEL CONNECTOR Y1 :Yokogawa KS2 cable use Y2 :Yokogawa KS9 cable use Y6 :Yokogawa FA-M3/F3XD32-3N use
Thick Film Array Chip Resistor
CN Series Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Reduction of assembly costs and
Thyristor & Diode Modules
Thyristor & We offer a broad range of PowerBLOCK modules containing thyristor and diode pellets in a voltage range of 1200V to 4400V and a current range of 61A up to 1070A. The modules are designed and
Aluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
Capacitors - Capacitance, Charge and Potential Difference
Capacitors - Capacitance, Charge and Potential Difference Capacitors store electric charge. This ability to store electric charge is known as capacitance. A simple capacitor consists of 2 parallel metal
Terminal Contact UL Insulation Designation (provided with) style form system approval Flux tight
eatures A miniature PCB Power Relay. form A contact configuration with quick terminal type. 5KV dielectric strength, K surge voltage between coils to contact. Ideal for high rating Home Appliances of heating
Aluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]
![C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]](/thumbs/90/101883046.jpg "C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]")
Multilayer Chip SDV Series Operating Temp. : -55 ~+125 FEATURES SMD type suitable for high density mounting Excellent clamping ratio and quick response time (
LR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
LR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
MAX4147ESD PART 14 SO TOP VIEW. Maxim Integrated Products 1 MAX4147 EVALUATION KIT AVAILABLE ; Rev 1; 11/96 V CC V EE OUT+ IN+ R t SENSE IN-
-; Rev ; / EVALUATION KIT AVAILABLE µ µ PART ESD TEMP. RANGE - C to +5 C PPACKAGE SO TOP VIEW V EE V CC SENSE+ SENSE- R t R t R t R t MAX SENSE OUT SENSE+ SENSE- N.C. SHDN N.C. 3 5 R f R G R f 3 VDSL TRANSFORMER
Thermistor (NTC /PTC)
ISO/TS16949 ISO 9001 ISO14001 2015 Thermistor (NTC /PTC) GNTC (Chip in Glass Thermistor) SMD NTC Thermistor SMD PTC Thermistor Radial type Thermistor Bare Chip Thermistor (Gold & silver Electrode) 9B-51L,
B37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Metal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Shunts & Multiple Shunts. Stamped Contact DIP IC Sockets. PLCC Sockets. Jumpers. DDR DIMM Sockets SOCKETS. System CS - Technical Specifications
System - Technical Specifications Shunts & Multiple Shunts Stamped Contact DIP IC Sockets ~ ~ PLCC Sockets ~ Jumpers ~ DDR DIMM Sockets Electrical: Current/Voltage rating: 0.5A/25VAC for Single Type 0.3A/25VAC
Metal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
0.635mm Pitch Board to Board Docking Connector. Lead-Free Compliance
.635mm Pitch Board to Board Docking Connector Lead-Free Compliance MINIDOCK SERIES MINIDOCK SERIES Features Specifications Application.635mm Pitch Connector protected by Diecasted Zinc Alloy Metal Shell
Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
Oil grooved pads PFO series
Oil grooved pads PFO series Connector type Top Side Pad with locking fitting PFO K φ20 ~ 40 P237 Barb connector PFOTK PFOYK Pad with spring fitting NAPFO S Stroke(mm) φ20 ~ 40 6,15,30 P239 Female screw
Metal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
THICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
ISM 868 MHz Ceramic Antenna Ground cleared under antenna, clearance area mm x 8.25 mm. Pulse Part Number: W3013
W0 Datasheet version.. Ceramic Antenna. (0/08). Ceramic Antenna Ground cleared under antenna, clearance area 0.80 mm x 8.5 mm. Pulse Part Number: W0 Features - Omni directional radiation - Low profile
Multilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
OWA-60E series IP67. 60W Single Output Moistureproof Adaptor. moistureproof. File Name:OWA-60E-SPEC
Single Output Moistureproof Adaptor OWA-60E series IP67 Ⅱ Ⅱ moistureproof I File Name:OWA-60E-SPEC 0-04- Single Output Moistureproof Adaptor OWA-60E series SPECIFICATION MODEL OWA-60E- OWA-60E- OWA-60E-0
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
DC-DC Constant Current Step-Down LED driver LDD-300L LDD-350L LDD-500L LDD-600L LDD-700L CURRENT RANGE
SPECIFICATION ORDER NO. LDD-00L LDD-0L LDD-00L LDD-00L LDD-700L CURRENT RANGE 00mA 0mA 00mA VOLTAGE RANGE Note. ~ VDC for LDD-00~700L/LW ; ~ 8VDC for LDD-00~700LS CURRENT ACCURACY (Typ.) ±% at VDC input
FEATURES APPLICATION PRODUCT T IDENTIFICATION PRODUCT T DIMENSION MAG.LAYERS
FEATURES RoHS compliant. Super low resistance, ultra high current rating. High performance (I sat) realized by metal dust core. Frequency Range: up to 1MHz. APPLICATION PDA, notebook, desktop, and server
Prepolarized Microphones-Free Field
Prepolarized Microphones-Free Field MP0 / MP3 / MP / MP / MP / MP / MP8 MP0 MP3 MP MP MP MP MP8 Standards (IEC7) I I I.3 ~ 0k 3 ~ 0k 0 ~.k 0 ~.k 0 ~ 70k 0 ~ k 0 ~ k Open-circuit Sensitivity (mv/pa) (±db)
NKT NTC Thermistor. Negative Temperature Coefficient Thermistor FEATURES
FEATURES Large, strong capacity of suppression of inrush current Big material (B value), small residual Small size, Long life, high reliability and fast response APPLICATIONS Switching -supply, switch,
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
Transient Voltage Suppression Diodes: 1.5KE Series Axial Leaded Type 1500 W
Features 1. Reliable low cost construction utilizing molded plastic technique 2. Both bi-directional and uni-directional devices are available 3. Fast response time 4. Excellent clamping capacity 5. 1500
LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
RC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
C4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
3M-Series Miniature Pushbutton Switches
Carling Technologies MN- Snap-Action Miniature Pushbutton Switch MS- Sealed Snap-Action Miniature Pushbutton Switch Specifications Contact Rating......... refer to ordering scheme Electrical Life..........
SMD AVR AVR-M AVRL. Variable resistor. 2 Zener diode (1/10) RoHS / / j9c11_avr.fm. RoHS EU Directive 2002/95/EC PBB PBDE
(1/1) SMD RoHS AVR AVR-M AVRL Variable resistor 2Zener diode Current(A) Positive direction 1 1 1 2 1 3 1 4 1 5 Zener diode /Vz:6.8V Chip varistor /V1mA:12V 2 Zener Diodes A capacitance content 18 14 1
( )( ) ( ) ( )( ) ( )( ) β = Chapter 5 Exercise Problems EX α So 49 β 199 EX EX EX5.4 EX5.5. (a)
hapter 5 xercise Problems X5. α β α 0.980 For α 0.980, β 49 0.980 0.995 For α 0.995, β 99 0.995 So 49 β 99 X5. O 00 O or n 3 O 40.5 β 0 X5.3 6.5 μ A 00 β ( 0)( 6.5 μa) 8 ma 5 ( 8)( 4 ) or.88 P on + 0.0065
PTC FUNCTION for Delta C2000 and CP2000
FUNCTION for Delta C2000 and CP2000 CONTENTS: GENERAL... 2. for motor temperature protection... 2.2 Standards... 2.3 Motor layout... 2.4 characteristic... 2.4. Definitions... 3.4.2 curve... 3.4.3 switching
S :Silicon Sealed blank:no Silicon Seal 2.54/0.100" 5.05/0.199" Code 3.2/0.126" 5.7/0.224" 3.2/0.126" 7.4/0.291"
Specifications Acceptable Plug: φ2~φ0.30/0.021"~0.011" Dielectric Strength: AC700Vrms 1min Insulation Resistance: 1000MΩ Contact Resistance: 15mΩmax Current Rating: 1.0 A Operating Temp.: -55 ~+150 (In
AT Surface Mount Package SOT-363 (SC-70) I I Y. Pin Connections B 1 C 1 E 1 E 2 C 2 B , 7:56 PM
AT-3263 Surface Mount Package SOT-363 (SC-7) I I Y Pin Connections B 1 C 1 E 1 E 2 C 2 B 2 Page 1 21.4., 7:6 PM Absolute Maximum Ratings [1] Absolute Thermal Resistance [2] : Symbol Parameter Units Maximum
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
(REV:01) RYOBI 48 Volt Lawn Mower Model No. RY14110 Replacement Parts List
9800-86 2-0-0 (REV:0) RYOBI 48 Volt Lawn Mower Model No. RY0 Replacement Parts List RYOBI RY0 48 volt lawn mower 3 38 39 44 39 36 34 36 42 38 39 3 4 37 34 3 43 2 32 0 8 9 2 4 33 8 7 6 3 6 7 22 8 20 3 30
ISM 900 MHz Ceramic Antenna Ground cleared under antenna, clearance area mm x 8.25 mm. Pulse Part Number: W3012
W0 Datasheet version.. Ceramic Antenna. (0/08). Ceramic Antenna Ground cleared under antenna, clearance area 0.80 mm x 8.5 mm. Pulse Part Number: W0 Features - Omni directional radiation - Low profile
Data sheet Thin Film Chip Inductor AL Series
Data sheet Thin Film Chip Inductor AL Series Scope - 0201 and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and
FT-63 SINGLE TURN CERMET TRIMMERS. F T E T V 5 k Ω ( ) FEATURES PART NUMBER DESIGNATION
SINGLE TURN FT-6 RoHS compliant INTERNAL STRUCTURE 4 5 8 6 FEATURES 4 5 6 8 Part name Housing Rotor Wiper O ring Resistive element Terminal pin Adhesive Base element Electrode Material PBT Polybutyleneterephthalate
LR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Rating to Unit ma ma mw W C C. Unit Forward voltage Zener voltage. Condition
MA MA Series Silicon planer e For stabilization of power supply ø.56. Unit : mm Features Color indication of VZ rank classification High reliability because of combination of a planer chip and glass seal
Technical Data for Profiles. α ( C) = 250 N/mm 2 (36,000 lb./in. 2 ) = 200 N/mm 2 (29,000 lb./in 2 ) A 5 = 10% A 10 = 8%
91 500 201 0/11 Aluminum raming Linear Motion and Assembly Technologies 1 Section : Engineering Data and Speciications Technical Data or Proiles Metric U.S. Equivalent Material designation according to
IXBH42N170 IXBT42N170
High Voltage, High Gain BIMOSFET TM Monolithic Bipolar MOS Transistor IXBH42N17 IXBT42N17 S 9 = 1 = 42A (sat) 2.8V Symbol Test Conditions Maximum Ratings TO-247 (IXBH) S = 25 C to 15 C 17 V V CGR = 25
Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Features. Terminal Contact Enclosure style style form Open type Dust cover Ears on cover Antirotation-tab Ears on top
SONG CHUN Features 20/2 general purpose Power Relays. SPDT, DPDT, TPDT contact configurations. DC & C coils are both available. Optional for flange covers, tapped core w/anti-rotation tab, indicator lamp,
Metal Film Flame-Proof Resistors
Features -Low Noise -Low TCR from ±15~100PPM/ -High Precision from ±0.1%~1% -Complete Flameproof Construction UL-1412. -Coating meets UL94V-0 Applications -Telecommunication -Medical Equipment -Consumer
Potential Dividers. 46 minutes. 46 marks. Page 1 of 11
Potential Dividers 46 minutes 46 marks Page 1 of 11 Q1. In the circuit shown in the figure below, the battery, of negligible internal resistance, has an emf of 30 V. The pd across the lamp is 6.0 V and
Metal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication
65W PWM Output LED Driver. IDLV-65 series. File Name:IDLV-65-SPEC
~ A File Name:IDLV65SPEC 07050 SPECIFICATION MODEL OUTPUT OTHERS NOTE DC VOLTAGE RATED CURRENT RATED POWER DIMMING RANGE VOLTAGE TOLERANCE PWM FREQUENCY (Typ.) SETUP TIME Note. AUXILIARY DC OUTPUT Note.
Electrical Specifications at T AMB =25 C DC VOLTS (V) MAXIMUM POWER (dbm) DYNAMIC RANGE IP3 (dbm) (db) Output (1 db Comp.) at 2 f U. Typ.
Surface Mount Monolithic Amplifiers High Directivity, 50Ω, 0.5 to 5.9 GHz Features 3V & 5V operation micro-miniature size.1"x.1" no external biasing circuit required internal DC blocking at RF input &
Gearmotor Data. SERIES GM9000: We have the GM9434H187-R1
SERIES GM9: We have the GM9434H187-R1 Gearmotor Data Item Parameter Symbol Units 5.9:1 11.5:1 19.7:1 38.3:1 65.5:1 127.8:1 218.4:1 425.9:1 728.1:1 1419.8:1 2426.9:1 4732.5:1 1 Max. Load Standard Gears
Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
SMD Transient Voltage Suppressors
SMD Transient Suppressors Feature Full range from 0 to 22 series. form 4 to 60V RMS ; 5.5 to 85Vdc High surge current ability Bidirectional clamping, high energy Fast response time
MAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction
TS-HA/HB Series 105 C, 3000 hours Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature:
CEMENT FIXED RESISTORS
Self extinguishing Excellent flame and moisture resistance Extremely small sturdy and mechanically safe Non-inductive types available for all Royal Ohm Cement Types Too low or too high ohmic values on
COMPONENTS LIST BASE COMPONENTS
ITLIN TEHNOLOGY grifo PPENIX : R SSEMLY The GP F can be ordered in two different mode: completely mounted, tested and ready to use or in assembly kit. In this final condition the user can directly use
(REV:01) RYOBI 48 Volt Lawn Mower Model No. RY14110A Replacement Parts List
9000-7 9-- (REV:0) RYOBI 4 Volt Lawn Mower Model No. RY0A Replacement Parts List RYOBI RY0A 4 VOLT LAWN MOWER 3 3 39 44 39 3 34 3 42 3 39 3 4 37 34 3 43 2 0 37 2 33 32 3 9 7 22 30 4 7 3 20 9 3 2 2 27 2
DATA SHEET Surface mount NTC thermistors. BCcomponents
DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped
NPN SILICON OSCILLATOR AND MIXER TRANSISTOR
FEATURES NPN SILICON OSCILLATOR AND MIXER TRANSISTOR LOW COST HIGH GAIN BANDWIDTH PRODUCT: ft = MHz TYP LOW COLLECTOR TO BASE TIME CONSTANT: CC r b'b = 5 ps TYP LOW FEEDBACK CAPACITANCE: CRE=.55 pf TYP
Instruction Execution Times
1 C Execution Times InThisAppendix... Introduction DL330 Execution Times DL330P Execution Times DL340 Execution Times C-2 Execution Times Introduction Data Registers This appendix contains several tables
NTC Thermistor:SCK Series
Features. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φmm:-40~+70
Precision Metal Film Fixed Resistor Axial Leaded
Features EIA standard colour-coding Non-Flame type available Low noise and voltage coefficient Low temperature coefficient range Wide precision range in small package Too low or too high ohmic value can
Shape Square. Tolerance of Varistor Voltage For Varistor voltage<68, Special For Varistor voltage 68, 10% Lead Wire Type Straight Cut Lead
Leaded Varistor for urge uppression VP eries Operating Temp. : -40 ~ +85 FEATURE Fast response Excellent clamping ratio, high peak current and pulse energy withstanding characteristics, providing strong
[1] P Q. Fig. 3.1
![[1] P Q. Fig. 3.1](/thumbs/79/80362156.jpg "[1] P Q. Fig. 3.1")
1 (a) Define resistance....... [1] (b) The smallest conductor within a computer processing chip can be represented as a rectangular block that is one atom high, four atoms wide and twenty atoms long. One
60W AC-DC High Reliability Slim Wall-mounted Adaptor. SGA60E series. File Name:SGA60E-SPEC
AC-DC High Reliability Slim Wall-mounted Adaptor SGA60E series Ⅵ Ⅴ Ⅱ Ⅱ { ψ. ψ File Name:SGA60E-SPEC 2015-09-15 AC-DC High Reliability Slim Wall-mounted Adaptor SGA60E series SPECIFICATION ORDER NO. SGA60E05-P1J
Metal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
SMD Power chokes- SPD Series SPD series chokes For High Current Use
SMD Power chokes- SPD Series SPD series chokes For High Current Use Features 1.Shielded construction. 2.High current rating up to DC Amp 3.High frequency range up to 5.MHz 4.Ultra low buzz noise, due to
SPECIFICATIONS. PRODUCT NAME: AC COB15W LED module (3120) General Customer MODEL NAME: CUSTOMER P/N: DATE: 2015-09-10
SPECIFICATIONS PRODUCT NAME: AC COB5W LED module (320) CUSTOMER: General Customer MODEL NAME: CUSTOMER P/N: DATE: 205-09-0 APT Electronics Ltd. CUSTOMER Prepared by Checked by Approved by Approved by He
Model VRT Miniature Type (Tapped Base Type)
odel VRT iniature Type (Tapped Base Type) F n F A H m φ D1 B B1 S1 1 F1 T1 f1 n1 F1 T 1 n f1 1 ain dimensions Table surface dimensions odel No. aximum stroke idth Heiht enth ass Table mountin tap position
MIL-C-5015 Connector Series
ircular onnector --5015 onnector eries K15-228- type connector K15-228- series circular connectors are used extensively in line connections between electrical equipment,various instruments and meters.
DC-DC Constant Current Step-Down LED driver LDD-300L LDD-350L LDD-500L LDD-600L LDD-700L CURRENT RANGE
SPECIFICATION ORDER NO. LDD-00L LDD-0L LDD-00L LDD-00L LDD-700L CURRENT RANGE 00mA 0mA 00mA 00mA VOLTAGE RANGE Note. ~ VDC for LDD-00~700L/LW ; ~ 8VDC for LDD-00~700LS CURRENT ACCURACY (Typ.) ±% at VDC
Unshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
Surface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. Characteristics. Leakage Current(MAX) I=Leakage Current(µA) C=Nominal Capacitance(µF) V=Rated Voltage(V)
SERIES 5 C Long Life. Low impedance. (Rated Voltage 6.3~V.DC) FEATURES Load Life : 5 C 4~hours. Low impedance at khz with selected materials. SPECIFICATIONS Items Operating Temperature Range Rated Voltage
Operating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
YAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.
YAGEO CORPORATION SMD INDUCTOR / BEADS CLH Series Multilayer Chip Inductors High Frequency Lead-free / For High Frequency Applications APPLICATIONS RF Resonance and Impedance Matching Circuit RF and Wireless
4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and