SINGLE TURN FT-6 RoHS compliant INTERNAL STRUCTURE 4 5 8 6 FEATURES 4 5 6 8 Part name Housing Rotor Wiper O ring Resistive element Terminal pin Adhesive Base element Electrode Material PBT Polybutyleneterephthalate Nickel silver Silicone rubber RuO cermet Copper, Tin-plated Epoxy Ceramic Ag-Pd cermet Flammability UL4V-0 UL4HB UL4V-0 PART NUMBER DESIGNATION F T - 6 E T V 5 k Ω ( 5 0 ) Series name Resistance code Terminal pin ESn (Lead-free) Form of packaging TTaping (Ammo pack type) BlankBulk in plastic bag Resistance value Product shape P Top adjustment S Side adjustment V Top adjustment X Side adjustment H Side adjustment N Side adjustment Please refer to the LIST OF PART NUMBERS when placing orders.
FT-6 LIST OF PART NUMBERS position Top adjustment Side adjustment Form of packaging Taping (Ammo pack type) FT-6ETP FT-6ETV FT-6ETS FT-6ETH Not manufactured Plastic bag FT-6EP FT-6EV FT-6ES FT-6EX FT-6EH FT-6EN Nominal resistance values Fig. A 0 Ω A 0 Ω 50 Ω 00 Ω 00 Ω 00 Ω 500 Ω kω kω kω 5 kω 0 kω 0 kω 0 kω 50 kω 00 kω 00 kω 00 kω 500 kω MΩ MΩ Fig. The above part numbers are all available with the respective com bi na tion of <Nominal resistance values> (Fig. ). Verify the above part numbers when placing orders. Taping specification is not sold separately and must be purchased in tap ing unit. A The products indicated by A mark are manufactured upon receipt of order basis. ELECTRICAL CHARACTERISTICS Nominal resistance range Resistance tolerance Power ratings Resistance law Maximum input voltage Maximum wiper current Effective electrical angle End resistance C.R.V. Operating temp. range Temp. coefficient Insulation resistance Dielectric strength Net weight 0 Ω ~ MΩ ± 0 % 0.5 W (0 C) 0 W (5 C) Linear law DC00 V or power rating, whichever is smaller Power ratings 0 ( turn) Ω % or Ω, whichever is greater Ω % or Ω, whichever is greater 55 ~ 5 C 0 Ω ~ 0 Ω : ± 50 0-6 / C maximum 50 Ω ~ MΩ : ± 00 0-6 / C maximum 000 MΩ minimum (DC500 V) AC00 V, 60 s Approx. 0.5 g (FT-6EP, EV) Approx. 0.66 g (FT-6ES, EH, EX, EN) MECHANICAL CHARACTERISTICS Mechanical angle Operating torque Stop strength Rotational life Terminal strength Thrust to rotor Solderability 60 ( turn) 0 mn m {04 gf cm} maximum 50 mn m {50 gf cm} minimum 00 cycles [R/R ± ( Ω + %)] 0 N {.0 kgf} minimum Tensile strength 0 N {.0 kgf} minimum 45 ± C, ~ s { }Reference only
FT-6 ENVIRONMENTAL CHARACTERISTICS Test item Thermal shock Humidity Shock Vibration Load life Low temp. operation High temp. exposure Immersion seal Soldering heat Test conditions 65 ~ 5 C (0.5 h), 5 cycles 0 ~ 65 C ( 80 ~ 8 %), 0 cycles, 40 h 8 m/s, 6 ms 6 directions for times each (Amplitude).5 mm or (Acceleration) 6 m/s, 0 ~ 000 Hz, directions, times each 0 C, 0.5 W 000 h 55 C, h 5 C, 50 h 85 C, 60 s Flow 60 ± C, 5 ~ 6 s, two times maximum Manual soldering 80 ± 0 C, ~ 4 s Specifications [R/R %] [S.S. %] [R/R %] [R/R %] [S.S. %] [R/R %] [S.S. %] [R/R %] [S.S. %] [R/R %] [S.S. %] No leaks (No continuous bubbles) [R/R %] R/RChange in total resistance S.S. Setting stability MAXIMUM INPUT RATINGS Nominal resistance values (Ω) Resistance code Maximum input voltage (V) Maximum wiper current (ma) A 0 00.4 A 0 00.6 58 50 500 5.00 00 00 0.0 0. 00 0 0.0 50.0 00 0. 40.8 500 50 5.8.6 k 0.4.4 k 0.6 5.8 k 0 8.. 5 k 50 50.0 0.0 0 k 0 0..0 0 k 0 00 5.00 0 k 0 4.08 50 k 50 58.6 00 k 04 00.00 00 k 04 00.00 00 k 04 00 0.66 500 k 504 00 0.40 M 05 00 0.0 M 05 00 0.0 A The products indicated by A mark are manufactured upon receipt of order basis.
FT-6 OUTLINE DIMENSIONS FT-6EP Top adjustment 60 Nom. 0.W L.6D φ 0.45 Unless otherwise specified, tolerance: ± 0. (Unit: mm) CW rotation 5.8 ± FT-6ES Side adjustment 0 60 Nom. 0.W L.6D 0..5 8..5± φ 0.45 FT-6EX Side adjustment 0.W L.6D 0 0. Lead-free Identification mark 60 Nom. 8. 0±.5 φ 0.45
FT-6 OUTLINE DIMENSIONS FT-6EV Top adjustment 60 Nom. 0.W L.6D φ 0.45 Unless otherwise specified, tolerance: ± 0. (Unit: mm) CW rotation FT-6EH Side adjustment 5.8.5 ± 6 ± Lead-free Identification mark 0 60 Nom. 0.W L.6D 0..5 ± FT-6EN Side adjustment Lead-free Identification mark 0.W L.6D 0 0. 60 Nom..5.5 ± 8. φ 0.45.5 ± 8. φ 0.45 Terminals & position in N type is different from X type.
FT-6 OUTLINE DIMENSIONS Unless otherwise specified, tolerance: ± 0. (Unit: mm) CW rotation FT-6ETV Top adjustment FT-6ETP Top adjustment 60 Nom. 0.W L.6D 60 Nom. 0.W L.6D.± Δ max. Δ max..± Δ max. Δ max. 4.8± ±0.5 min. 8±0.5 +0. 8±0.5 4.8± +0. ±0.5 6± min. 5.8 5.8 ±0.5 0. 0. 6.5±0.5 φ 4±0. 6.5±0.5 φ 4±0..±0. 0.45±0.0.±0. 0.45±0.0 FT-6ETH Side adjustment FT-6ETS Side adjustment 60 Nom..± 0 0.W L.6D Δ max. 8. 0. Δ max..± 60 Nom. 0 0.W L.6D Δ max. 8. 0. Δ max. ±0.5.± ±0.5 min. +0. 8±0.5.5.± ±0.5 6± min. +0. 8±0.5.5 0. 6.5±0.5.±0. 0.45±0.0 φ 4±0. 6.5±0.5 φ 4±0. 0..±0. 0.45±0.0
FT-6 PACKAGING SPECIFICATIONS <Taping packaging specifications> <Bulk pack specifications> # terminal Direction of feed 45 0 0 Direction of feed Ammo pack type # terminal Ammo Pack