Metal Oxide Varistors (MOV) Data Sheet

Transcript

1 Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping ratio and no follow-on current Meets MSL level, per J-STD-020 Operating Temperature:-40 ~ +85 Storage Temperature:-40 ~ +25 Safety certification: UL: E CSA: VDE: Applications Transistor, diode, IC, thyristor or triac semiconductor protection Surge protection in consumer electronics Surge protection in industrial electronics Surge protection in electronic home appliances, gas and petroleum appliances Relay and electromagnetic valve surge absorption Part Number Code Revision:27-Dec-5 /

2 Dimensions Φ SERIES Table Table 2 Unit: mm Unit: mm Symbol Dimension Model T e Model T e H(±2.0) K K H(±2.0) K K L(min.) K K L(min.) K K D ~ K K F(±0.8) K K T(±0.8) Table 2 560K K e(±0.8) Table 2 680K K d(±0.05) K K d(±0.4).4 K K K K K K K K K K K K K K K Revision:27-Dec-5 2 /

3 Electrical Characteristics Φ SERIES Part Number Maximum Allowable Voltage Varistor Voltage Maximum Clamping Voltage Withstanding Surge Current Maximum Energy (/00μs) Rated Power Typical Capacitance (Reference) Standard High Surge V AC (V) V DC (V) V ma (V) I P (A) V C (V) I (A) Standard I (A) High Surge (J) Standard (J) High Surge (pf) 80KD 80KDJ 4 8(5~2.6) KD 220KDJ (9.5~26) KD 270KDJ (24~3) KD 330KDJ (29.5~36.5) KD 390KDJ (35~43) KD 470KDJ (42~52) KD 560KDJ (50~62) KD 680KDJ (6~75) KD 820KDJ (74~90) KD KDJ (90~) KD 2KDJ (8~32) KD 5KDJ (35~65) KD 8KDJ (62~98) KD 20KDJ (80~220) KD 22KDJ (98~242) KD 24KDJ (26~264) KD 27KDJ (243~297) KD 30KDJ (270~330) KD 33KDJ (297~363) KD 36KDJ (324~396) KD 39KDJ (35~429) KD 43KDJ (387~473) KD 47KDJ (423~57) KD 5KDJ (459~56) KD 56KDJ (504~66) KD 62KDJ (558~682) KD 68KDJ (62~748) KD 75KDJ (675~825) KD 78KDJ (702~858) KD 82KDJ (738~902) KD 9KDJ (89~0) KD 2KDJ (900~0) KD 2KDJ (990~2) Notes:. The tolerance of varistor voltage between 8V and 27V is more than %. 2. Leakage Current (@83% of V ma ):IR 50μA (80K~680K) IR 25μA (820K~2K) Revision:27-Dec-5 3 /

4 Electrical Ratings Φ SERIES Items Test Condition/Description Requirement Varistor Voltage The voltage between two terminals with the specified measuring current ma.dc applied is called Vb. Maximum Allowable Voltage The recommended maximum sine wave voltage (RMS) or the Maximum DC voltage can be applied continuously. The maximum voltage between two terminals with the specification standard impulse current. Applied waveform: 8/20μs Maximum Clamping Voltage To meet the Specified value Rated Wattage The maximum average power that can be applied within the specified ambient temperature. Energy The maximum energy within the varistor voltage change of ±% when one impulse of /00μs or 2ms is applied. Withstanding Surge Current The maximum current within the varistor voltage change of ±% with the standard impulse current (8/20μs) applied one time. Varistor Voltage Temp. Coefficient Vb at 20 Vb at 70 Vb at (%/ ) 0.05%/ max Surge Life The change of Vb shall be measured after the impulse listed below which is applied,000 times continuously with the interval of ten seconds at room temperature. 80K to 680K 50A (8/20μs) Φ series 820K to 2K 0A (8/20μs) Vb Vb ±% Revision:27-Dec-5 4 /

5 Soldering Recommendation Φ SERIES Wave Lead Free Soldering Recommendation Preheating Maximum Wave 265 Soldering Cooling Time (minutes) 4 Item Conditions Peak Temperature 265 Dipping Time seconds (max.) Soldering time Recommendation Reworking Conditions with Soldering Iron Item Temperature of Soldering Iron-tip Soldering Time Distance from Varistor Conditions 360 (max.) 3 seconds (max.) 2mm (min.) Revision:27-Dec-5 5 /

6 Maximum Surge Current Derating Curve Φ SERIES KD to 680KD KD to 75KD Td (μs) Td (μs) KDJ to 2KDJ 0. 0 Td (μs) Revision:27-Dec-5 6 /

7 and Curve Φ SERIES 80KD to 680KD KD 560KD 470KD 390KD 330KD 270KD 220KD 80KD KD to 47KD KD 43KD 39KD 36KD 33KD 30KD 27KD 24KD 22KD 20KD 8KD 5KD 2KD KD 820KD Revision:27-Dec-5 7 /

8 and Curve Φ SERIES 5KD to 2KD KD 2KD 9KD 82KD 78KD 75KD 68KD 62KD 56KD 5KD KDJ to 680KDJ KDJ 560KDJ 470KDJ 390KDJ 330KDJ 270KDJ 220KDJ 80KDJ Revision:27-Dec-5 8 /

9 and Curve Φ SERIES 820KDJ to 75KDJ KDJ 68KDJ 62KDJ 56KDJ 5KDJ 47KDJ 43KDJ 39KDJ 36KDJ 33KDJ 30KDJ 27KDJ 24KDJ 22KDJ 20KDJ 8KDJ 5KDJ 2KDJ KDJ 820KDJ KDJ to 2KDJ 2KDJ 2KDJ 9KDJ 82KDJ 78KDJ Revision:27-Dec-5 9 /

10 Φ SERIES Marking Code Brightking Logo 2 Varistor Voltage XXXKDXXX Y VDE XXX H X UL Accreditation Logo 4 CSA Accreditation Logo 5 VDE Accreditation Logo 6 J is High Surge Code, no J is Standard Surge 7 Disk Size 8 H is Halogen Free Code, no H is Halogen 9 Date Code Product Line Code ( Y may be A thru Z or blank) Taping Dimensions Symbol Dimension (mm) P 25.4±.0 P0 2.7±.0 P 8.95±0.7 P2 2.7±.3 F 7.5±0.8 h 0±2 W 8.0±.0 W0 2.0±.0 W 9.0±0.5 W2 3.0max H 20.0±2.0 I.0max D0 4.0±0.2 t 0.6±0.3 B 36max Revision:27-Dec-5 /

11 Quantity Φ SERIES Packaging Dimensions (Unit: mm) Bulk Quantity 500pcs/bag 2bags/box (80K~62K) 400pcs/bag 2bags/box (68K~2K) Tape & Box 750pcs/box (80K~39K) 500pcs/box (43K~62K) 300pcs/box (68K~75K) Tape & Reel 00pcs/reel (80K~39K) 750pcs/reel (43K~62K) 500pcs/reel (68K~75K) Revision:27-Dec-5 /