Contact resistance : environmental class hermetic class. Insulation resistance : 5000 mω at 500 Vdc
|
|
- Εκάτη Αλεξίου
- 5 χρόνια πριν
- Προβολές:
Transcript
1 8526 eries pplications or all general purposes in aeromil area. tandards N 934 H 3 TT 5935 x 1 haracteristics Mechanical ndurance : 5 operations hock : according to N 934 H 3 Vibrations : to Hz, g ontact retention in insert : : 9 N : 115 N : 133 N lectrical current rating per contact : environmental class hermetic class 7, ontact resistance : environmental class hermetic class 1 mω 7 mω,55 mω 3,8 mω,35 mω 2,4 mω Insulation resistance : 5 mω at 5 Vdc ielectric withstanding voltage 2 classes : services I and II ervice I II at ground level 15 Vrms 23 Vrms at 2 m 375 Vrms 55 Vrms hell continuity : environmental receptacle 5 mω hermetic receptacle 5 mω Resistance to fluids : according to N 934 H 3 escription Intermateable and interchangeable with MIL eries I and II IN 2954 and PN luminum alloy olive green or nickel plating ayonet coupling old plating crimp contacts #, and # # and # coaxial contacts Hermetic versions available limatic Operating temperature : 55 to + (class N) 55 to +175 (class ) amp heat : 56 days alt spray : 48 hours Leakage : environmental version : when mated under a differential pressure of 2 bar, air leakage is cm 3 / hr low pressure immersion : 33 mbar hermetic version : differential pressure of 1 bar air/helium, leakage is 2,8 mm 3 / hr Ordering information nvironmental connectors basic series P N type square flange receptacle 7 jam nut receptacle 36 RI shielded plug plug plating olive green cadmium N nickel contact layout see table p 56 contact type P male contact female contact orientation N normal W,, Y, Z see table p 57 specification L supplied without contacts connectors supplied without back, with standard contacts : without digit specification for connector supplied with back and standard contacts : 1 backnut 2 straight cable clamp 3 elbow cable clamp 17 back for heatshrink sleeving 32 back for shield termination and heatshrink sleeving 9 receptacle or 7 with straight spill contacts Ø.6 mm length 7.3 mm. 53
2 8526 eries Hermetic connectors basic series H 6 P N type 1 solder fixing receptacle 2 square flange receptacle 7 jam nut receptacle plating H tin over nickel contact layout see table p 56 contact type P male contact only orientation N normal W,, Y, Z see table p 57 acks basic series back type 1 backnut 2 straight cable clamp 3 elbow cable clamp 17 back for heatshrink sleeving 32 back for shield termination and heatshrink sleeving plating olive green cadmium N nickel aps basic series caps type 26 cap for plug 27 cap for square flange receptacle 28 cap for plug 29 cap for jam nut receptacle plating olive green cadmium N nickel specification metallic chain : without digit 26 nylon cord 54
3 8526 eries ross reference list I ouriau N 934 H 3 esignation 8526 P H 3 P 7 square flange receptacle olive green plating 8526 N P H 3 P 6 square flange receptacle nickel plating P H 3 7 P 7 jam nut receptacle olive green plating N P H 3 7 P 6 jam nut receptacle nickel plating 8526 P H 3 6 P 6 plug olive green plating 8526 N P H 3 6 P 6 plug nickel plating P H 3 5 P 7 RI shielded plug olive green plating N P H 3 5 P 6 RI shielded plug nickel plating 85261H P H 3 1H P 2 solder flange receptacle 85262H P H 3 2H P 2 square flange receptacle 85267H P H 3 7H P 2 jam nut receptacle H backnut olive green plating N H backnut nickel plating H straight cable clamp olive green plating N H straight cable clamp nickel plating H elbow cable clamp olive green plating N H elbow cable clamp nickel plating H back for screen termination and heatshrink sleeving olive green plating N H back for screen termination and heatshrink sleeving nickel plating H cap for plug olive green plating, metallic chain, ring N H cap for plug nickel plating, metallic chain, ring H 3 7 cap for receptacle olive green cadmium, metallic chain, eyelet N H 3 6 cap for receptacle nickel plating metallic chain, eyelet H 3 7 cap for plug olive green cadmium, metallic chain, eyelet N H 3 6 cap for plug nickel plating, metallic chain, eyelet H cap for receptacle olive green cadmium, metallic chain, ring N H cap for receptacle nickel plating metallic chain, ring 85 N L plastic tool for contacts 85 N L plastic tool for contacts 85 N L plastic tool for contacts 55
4 8526 eries ontact layouts viewed from front face of male insulator 8 3 * 3 6 * 6 * 19 * * 26 s 32 * * * * 61 3Ø1 6Ø1 Ø1 19Ø1 26Ø1 32Ø1 41Ø1 55Ø1 61Ø * 33 N * 3 15 * 15 8 * * * Ø1 1 coax 3Ø1.6 Ø1 1Ø1.6 8Ø1.6 11Ø1.6 * 8 * 8 37Ø1 2Ø1.6 * 27Ø1 Ø1.6 31Ø * Ø1 4Ø1.6 8Ø2.4 Ø1.6 21Ø1.6 19Ø2.4 5 * 5 N 468 N 29 8Ø1 5 x Ø1.6 4 * 4 2# 2# Ø2.4 52Ø1 2 coax # N Ø2.4 * hermetic receptacle available pecials HTP 58Ø1 1 oax 5 Ω
5 8526 eries Polarization (insulator rotated inside metal body) Z Y ontacts N Minicoax contacts minicoax installed instead of contacts layouts service I service II number of contacts 15 Vrms 23 Vrms angles in degrees N W Y Z male contacts female contacts cables accepted R174 U/K 3 R3 U/K R178 U/K 21 R 179 U minicoax installed instead of contacts W contact # standard # * # standard # * # standard Technical characteristics diameter 1 mm 1 mm 1,6 mm 1,6 mm 2,4 mm retention force 9 N 9 N 115 N 115 N 136 N current rating 7,5 7, contact resistance 1 mω 1 mω,55 mω,55 mω,35 mω dmissible wires external Ø over insulator,98 to 2,11 mm,98 to 2,11 mm 1,34 to 2,62 mm 1,34 to 2,62 mm 2,45 to 4,1 mm admissible section,21 to,6 mm 2,38 to,93 mm 2,6 to 1,34 mm 2,93 to 1,91 mm 2 1,91 to 3, mm 2 wire gauge to to to to to reducing sleeve for wire of,9 to,21 mm 2 Part numbers male contact female contact colour code redred redviolet blueblue blueorange yellowyellow male contact thermocouples chromel colour code yellow yellow yellow yellow thermocouples alumel colour code black black black black female contact thermocouples chromel colour code yellow yellow yellow yellow thermocouples alumel colour code black black black black reducing sleeve 85 male contacts female contacts cables accepted R 178 U R 179 U R 3 U R U 57
6 8526 eries imensions and 36 plug type min H Plug back assembly overall length, H, M, and Y acks backnut type 1 Ø Ø traight cable clamp type 2 elbow cable clamp type H Ø for flange Ø J K min K L M N min O P Q ØK L M Ø for flange R T U V W Y back for heatshrink sleeving type 17 back for shielded termination and heatshrink sleeving type 32 R Y P V W ØN ØO Q ØN ØO
7 8526 eries nvironmental square flange receptacle type panel cutout Ø ØH with backnut J front mounting K flat mounting H J K nvironmental jam nut receptacle 7 type H J panel cutout H Ø with backnut J Ø older fixing receptacle 2 H type panel cutout ØH ØJ max L K # # # H J K L ### ###
8 8526 eries Jam nut receptacle 7 H type panel cutout Ø max Ø J # # # H J min Hermetic solder fixing receptacle 1 H type panel cutout ØH Ø soldering # # # H aps basic series caps type 26 cap for plug (plug fixing) 27 cap for square flange receptacle 28 cap for plug (back fixing) 29 cap for jam nut receptacle plating olive green cadmium N nickel specification metallic chain : without digit 26 nylon cord 6
9 Ø 8526 eries aps aps for plug aps for receptacle 26 type specif type L1 29 type specif. 26 L4 29 type L1 28 type specif type Ø L2 27 type specif type Ø L1 Ø Ø Panel gaskets L1 L2 L3 L part numbers gaskets o ring jam nut receptacle square flange receptacle 7 and 7 H type ummy receptacle 4 Ø part number Olive green nickel N N N N N N N N N Reusable fixing plates Two, three or four holes self locking fixing plates are available at HTP. ee page 6 61
10 Mouser lectronics uthorized istributor lick to View Pricing, Inventory, elivery & Lifecycle Information: ouriau: N39PNL 85262H33PN
DEUTSCH RR Series Filter Connectors MIL-DTL SERIES 2
DUTSCH ilter Connectors DUTSCH RR Series ilter Connectors MIL-DTL-2642 SRIS 2 DUTSCH RR Series connectors are medium-density, MIL-DTL-2642 Series 2 circular connectors using a bayonet coupling with visible
Διαβάστε περισσότεραMIL-DTL Micro-D Connector R04J Series Straight to PCB Type
MIL-TL-353 Micro- onnector R4J Series Straight to P Type Specication MIL-TL-353 Micro- onnector nvironment temperature: ~ Vibration: Hz~Hz, 6m/s Random vibration: Power spectrum density.4g Hz root mean
Διαβάστε περισσότερα10.16mm PITCH TERMINAL CONNECTOR 4.34(0.171) 3.5(0.138) 9.5(0.374) 19.5(0.768) 3(0.118) 7.085(0.279) 8.485(0.334) 21(0.827) 14(0.
7010 SRIS 10.16mm PITH TRMINL ONNTOR 4.345 (0.171) 3.5 (0.138) 19.5(0.768) 9.5 (0.374) 4.34(0.171) Ref. 10.585(0.417) Ref. 1.9(0.075) Ref. 2.2(0.087) ORR O 7010 160 : RoHS ompliance ontact name 160 : Receptacle
Διαβάστε περισσότεραDEUTSCH 983 Series Filter Connectors MIL-DTL SERIES III
DEUTSCH 93 Series Connectors are MIL-DTL-3723 Series III style connectors meeting ESC, ESC15, and EN2997 standards. With medium-density insert arrangements, fine threaded coupling, and corrosion resistant
Διαβάστε περισσότεραSMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
Διαβάστε περισσότεραDatasheet. MIL-DTL series III circular electrical connector / 18
Datasheet MIL-DTL-38999 series III circular electrical connector 1 / 18 MIL-DTL-38999 series III circular electrical connector Brief introducing how to order Outline dimension Rear accessory Characteristic
Διαβάστε περισσότεραMIL-DTL Micro-D Connector R04J Series Crimp Contact Type
R MIL-TL-353 Micro- onnector MIL-TL-353 Micro- onnector R04J Series rimp ontact Type Introduction Micro- connectors Twist pin contact, high density interconnection Metal shell,plated nickel or cadmium
Διαβάστε περισσότεραSMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
Διαβάστε περισσότεραSeries Overview *SOP (Small Outline Packages, Gullwing Leads) SMT Devices. Series IC51 (Clamshell) SOP, TSOP Type I & II
SMT evices Series Overview *SOP *SOP variations e.g. TSSOP... Series I51 (lamshell) SOP, TSOP Type I & II Insulation Resistance: 1,000MΩ min. at 500V ielectric Withstanding Voltage: 700V for 1 minute ontact
Διαβάστε περισσότεραBMA SERIES Subminiature Blind Mate Connectors
SERIES Subminiature Blind Mate Connectors FEATURES The blindmate connectors are designed for blindmate applications up to Ghz. They have a slide-on, non-locking interface which ensures frequent matings
Διαβάστε περισσότερα± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:
TS-UP Series 85 C, 3000 hours Compact size for general purpose and industrial applications 2 and 3 pin versions available 20mm lengths for low profile applications RoHS Compliant Rated Working Voltage:
Διαβάστε περισσότεραMIL-C-5015 Connector Series
ircular onnector --5015 onnector eries K15-228- type connector K15-228- series circular connectors are used extensively in line connections between electrical equipment,various instruments and meters.
Διαβάστε περισσότεραStainless Steel Series MIL-DTL Series III
8D - D38999 Stainless Steel Series Stainless Steel Series MIL-DTL-38999 Series III 39 8D Series - MIL-DTL-38999 Series III Description High contact density Screw coupling Contact protection: 100% Scoop
Διαβάστε περισσότεραShunts & Multiple Shunts. Stamped Contact DIP IC Sockets. PLCC Sockets. Jumpers. DDR DIMM Sockets SOCKETS. System CS - Technical Specifications
System - Technical Specifications Shunts & Multiple Shunts Stamped Contact DIP IC Sockets ~ ~ PLCC Sockets ~ Jumpers ~ DDR DIMM Sockets Electrical: Current/Voltage rating: 0.5A/25VAC for Single Type 0.3A/25VAC
Διαβάστε περισσότεραSMB SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50Ω impedance for applications up to 4GHz. Suited for cables with dielectric diameters of up to 1.5mm. The connectors
Διαβάστε περισσότεραA1253 SERIES. Specifications. Assembly layout. Ordering code. 1.25mm pitch wire to board connector A1253 T P E -A A1253 WR A SF 05P D01 A1253 H A 05P
Specifications Current rating: 1A AC,DC Voltage rating: 150V AC,DC Temperature range: -25 C ~ +85 C Contact resistance: 30mΩ Max. Insulation resistance: 500MΩ Min. Withstanding voltage: 500V AC/minute
Διαβάστε περισσότεραWEB Series. RoHS Compliant. Waterproof Miniature Circular Connector SPECIFICATION MATERIAL/FINISH WEB FEATURE
Series RoHS ompliant Waterproof Miniature ircular onnector series connectors meet the performance criteria of most factory automation applications as they are waterproof and withstand exposure to water,
Διαβάστε περισσότεραLong 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction
TS-HA/HB Series 105 C, 3000 hours Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature:
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Διαβάστε περισσότεραMechanical Properties. Electical conductivity 3) < 0.5 mω non conductive < 0.5 mω 1) 2)
CABE CAMPS Metallic Cable Clamp A MS 3420 Bushing Shell material: A - Aluminum Alloy B - Copper Alloy C - Stainless Steel Surface treatment: A - Black Zinc-Cobalt C - Black Polyurethane Varnished E - Electro
Διαβάστε περισσότερα3M-Series Miniature Pushbutton Switches
Carling Technologies MN- Snap-Action Miniature Pushbutton Switch MS- Sealed Snap-Action Miniature Pushbutton Switch Specifications Contact Rating......... refer to ordering scheme Electrical Life..........
Διαβάστε περισσότεραSPECIFICATIONS... Pag. 2. WIRE SOLDER... Pag. 3. PCB SOLDER... Pag HIGH VOLTAGE PCB SOLDER... Pag. 6. RIGHT ANGLE PCB... Pag.
DIN 41618 & 41622 INDEX DIN 41618 SPECIFICATIONS.......................................................... Pag. 2 WIRE SOLDER............................................................ Pag. 3 PCB SOLDER.............................................................
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Διαβάστε περισσότερα0.635mm Pitch Board to Board Docking Connector. Lead-Free Compliance
.635mm Pitch Board to Board Docking Connector Lead-Free Compliance MINIDOCK SERIES MINIDOCK SERIES Features Specifications Application.635mm Pitch Connector protected by Diecasted Zinc Alloy Metal Shell
Διαβάστε περισσότεραStamped contacts Crimp male contacts diameter 1,6 mm for wire gauge AWG silver plated Part No. VN (1) Contact Stamped contacts
Stamped contacts Crimp male contacts diameter 1,6 mm for wire gauge AWG - 16 silver plated VN 01 016 0002 ( Series Subseries Contacts Contact Stamped contacts Common Characteristics Contact diameter 1,6
Διαβάστε περισσότεραC4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
Διαβάστε περισσότεραMMCX SERIES Microminiature Coaxial Connectors
SERIES Microminiature Coaxial Connectors FEATURES connectors are smaller than MCX connectors and are used from DC up to 6 GHz in applications where a tiny size is crucial. INTERFACE MATING DIMENSIONS PLUG:
Διαβάστε περισσότεραD-SUB SOLDER TYPE ORDER INFORMATION. Bestell Code/Order Code: DST (Stecker / Male) L DBU (Buchse / Female) L
D-SUB SOLDER TYPE DST (Stecker / Male) - - - L DBU (Buchse / Female) - - - L = Polzahl / No. of contacts (9,15,25,37) = Isolierkörper weiß / Insulator white L = Lötkelch / Solder Type 1 D-SUB P.C.B. STRAIGHT
Διαβάστε περισσότερα8LT Series. MIL-DTL Series I
Contents Overview 8LT Series Presentation... 06 8LT Series Applications... 06 A universal product platform... 07 Contact layouts... 08 Contact layouts (matrix)... 12 Series 8LT Standard Version: Technical
Διαβάστε περισσότεραHSB Series. 1. Specifications DIN VDE 0110 Concerning clearance and creepage distances DIN VDE 0627 Connectors and plug devices
HSB Series 1. Specifications DIN VDE 0110 Concerning clearance and creepage distances DIN VDE 0627 Connectors and plug devices 2. Standards DIN EN 60 664-1 DIN EN 61 984 3. Approvals 169 All specifications
Διαβάστε περισσότεραThin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Διαβάστε περισσότεραApplications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
Διαβάστε περισσότεραB37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Διαβάστε περισσότεραFeatures. Terminal Contact Enclosure style style form Open type Dust cover Ears on cover Antirotation-tab Ears on top
SONG CHUN Features 20/2 general purpose Power Relays. SPDT, DPDT, TPDT contact configurations. DC & C coils are both available. Optional for flange covers, tapped core w/anti-rotation tab, indicator lamp,
Διαβάστε περισσότεραTHICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Διαβάστε περισσότεραCurrent Sense Metal Strip Resistors (CSMS Series)
Features: Range: 1mΩ to 100mΩ Low TCR as low as 75PPM High power rating Custom Values available RoHS Compliant and Halogen Free Operating Temperature: -55 C to +170 C Part Number Structure CSMS 0805 -
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication
Διαβάστε περισσότεραAluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Διαβάστε περισσότεραMilitary Circular MIL-C-5015 catalogue Product Index
BN: 69 002 691 241 Military Circular MIL-C-5015 catalogue Product Index Solder Connectors 5 Crimp Front Release Connectors 13 Crimp Rear Release Connectors 18 Insert Configuration Table 22 Orientation
Διαβάστε περισσότεραMSN DESK TOP ENCLOSURE WITH STAND / CARRYING HANDLE
MSN SERIES MSN DESK TOP ENCLOSURE WITH STAND / CARRYING HANDLE W H FEATURE Available in 176 sizes. Stand / carrying handle can be adjusted in 30 degree. Maximum load is kg. There are no ventilation hole
Διαβάστε περισσότεραCarbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
Διαβάστε περισσότεραAluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
Διαβάστε περισσότεραLS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
Διαβάστε περισσότεραMS SERIES MS DESK TOP ENCLOSURE APPLICATION EXAMPLE FEATURE. Measuring instruments. Power supply equipments
MS SERIES MS DESK TOP ENCLOSURE FEATURE Available in 176 sizes. Screws are not appeared on the surface. Usable as rack mount case with optinal mounting bracket. There are no ventilation hole for cover
Διαβάστε περισσότεραSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Διαβάστε περισσότεραOperating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
Διαβάστε περισσότερα*% 6HULHV 0LQLDWXUH %D\RQHW /RFN &RQQHFWRUV 'HVLJQHG WR PHHW 0,/ & Amphenol
mphenol New Planforms mphenol 62G solder connectors 1 Schedule of Tests Required for Qualification pproval 1 2 Schedules of Tests Required for Qualification pproval 3 onnector Styles vailable Receptacles
Διαβάστε περισσότεραLR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Διαβάστε περισσότεραLowara SPECIFICATIONS
SH Series Centrifugal pumps entirely made of AISI 36 stainless steel according to EN 733 (ex DIN 24255). Designed to pump hot, cold and moderately aggressive liquids. Available versions: SHE Close-coupled
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
Διαβάστε περισσότεραELWOOD HIGH PERFORMANCE MOTORS H-SERIES MOTOR DATA
H-SERIES MOTOR DATA MOTOR MODEL H-3007 H-3016 H-4030-P H-4030-M H-4040 H-4050 H-4075 H-6100 H-6200 H-6300 MECHANICAL DATA (1) Rated Torque, Cont (Stall) 0.8 2.3 3.4 3.4 5.0 6.8 10.2 11.3 22.6 36.7 lb-in
Διαβάστε περισσότεραApplications Water distribution
1 FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron designed to pump clean, chemically non-aggressive water and liquids. Available versions:
Διαβάστε περισσότεραSurface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
Διαβάστε περισσότεραCMPTER 2.92MM CONNECTORS. ... A Vital Part of Connection World. Receptacles With Accepts Pin Receptacles, Metal Through The Wall
... A Vital Part of Connection World Receptacles With Accepts Pin Receptacles, Metal Through The Wall Receptacles, Insulator Through The Wall Receptacles, Air ine Through The Wall PCB Connectors 2.92MM
Διαβάστε περισσότεραSPARE PARTS LIST. for. Infrared oil heater. Model. Daystar. Type. PH5 for 120V 60Hz. May, 2017
SPARE PARTS LIST for Infrared oil heater Model Daystar Type PH5 for 120V 60Hz May, 2017 *PRICES AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE..* 2017 J.S.O'will, Inc.. Shizuoka Seiki Co. Ltd.
Διαβάστε περισσότεραDLG Series. Lowara SPECIFICATIONS APPLICATIONS ACCESSORIES MATERIALS. General Catalogue
DLG Series Submersible pumps with open impeller with grinder assembly for pumping sewage, liquids, wastewater in general and industrial sludge, draining of flooded excavations. SPECIFICATIONS Delivery:
Διαβάστε περισσότεραNMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
Διαβάστε περισσότεραNo item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor
PART NUMBERING SYSTEM SI F 0805 K 780 F (1) (2) (3) (4) (5) (6) No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor (2) Type F Ferrite
Διαβάστε περισσότερα4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
Διαβάστε περισσότεραTrimmable Thick Film Chip Resistor
rimmable hick ilm Chip Resistor R Series rimmable hick ilm Chip Resistor Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. eatures
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Διαβάστε περισσότεραThick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MW) THICK FILM ON ALUMINA SUSTRATE,
Διαβάστε περισσότεραMultilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Διαβάστε περισσότερα38BXCS STANDARD RACK MODEL. DCS Input/Output Relay Card Series MODEL & SUFFIX CODE SELECTION 38BXCS INSTALLATION ORDERING INFORMATION RELATED PRODUCTS
DCS Input/Output Relay Card Series STANDARD RACK MODEL 38BXCS MODEL & SUFFIX CODE SELECTION 38BXCS MODEL CONNECTOR Y1 :Yokogawa KS2 cable use Y2 :Yokogawa KS9 cable use Y6 :Yokogawa FA-M3/F3XD32-3N use
Διαβάστε περισσότεραSelf-Lubricating Rod End > Spherical Bearings Product Overview
Self-Lubricating Product Overview Table of Contents FMW3E_.4 / NSA8143 FMW3F_.4 / NSA8149 REM REF EN6056 Page IV-3-4 IV-5-6 IV-7-8 IV-9-10 IV-11-12 FMW3E_.4 / NSA8143 NSA8143-04 X R F P FMW3E 4 4 X R K
Διαβάστε περισσότεραPEH C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life
PEH 169 85 C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life APPLICATION BASIC DESIGN Smoothing, energy storage, or pulse operation in telecommunication
Διαβάστε περισσότεραNPIS Shielded Power Inductors
FEATURES SHIELDED POWER INDUCTOR ULTRA LOW PROFILE (1.0 ~ 4.5mm MAX. HEIGHT) SURFACE MOUNTABLE CONSTRUCTION INDUCTANCE VALUES UP TO 220µH TAPED AND REELED FOR AUTOMATIC INSERTION CHARACTERISTICS Case Size
Διαβάστε περισσότεραUnshielded Power Inductors
Unshielded Power Inductors /080/0804/0810/106/106 Series Inductance with current and temperature: Inductance is measured with P-484 LR Meter or equivalent. Inductance drops 10% typical at Isat level with
Διαβάστε περισσότεραSurface Mount Multilayer Inductor
FETURES 0603, 0805, 0806 ND 1008 CSE SIZES HIGH CURRENT ND LOW RESISTNCE NEW "S" VERSION FOR INCRESED STURTION CURRENT UGRDED "H" VERSION FOR HIGHEST CURRENT REFLOW SOLDERING LICBLE CKGE FOR UTOMTIC ICKLCE
Διαβάστε περισσότεραCSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Διαβάστε περισσότεραSpecification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)
High CV-value Long Life > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life Optimized designs available on request RoHS Compliant application Basic design Smoothing, energy storage,
Διαβάστε περισσότεραHigh Current Chip Ferrite Bead MHC Series
High Current Chip Ferrite Bead MHC Series Features Combination of high frequency noise suppression with capability of handing high current. The current rating up to 6 Amps with low DC. Applications High
Διαβάστε περισσότεραGearmotor Data. SERIES GM9000: We have the GM9434H187-R1
SERIES GM9: We have the GM9434H187-R1 Gearmotor Data Item Parameter Symbol Units 5.9:1 11.5:1 19.7:1 38.3:1 65.5:1 127.8:1 218.4:1 425.9:1 728.1:1 1419.8:1 2426.9:1 4732.5:1 1 Max. Load Standard Gears
Διαβάστε περισσότεραCSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Διαβάστε περισσότεραMetal Film Flame-Proof Resistors
Features -Low Noise -Low TCR from ±15~100PPM/ -High Precision from ±0.1%~1% -Complete Flameproof Construction UL-1412. -Coating meets UL94V-0 Applications -Telecommunication -Medical Equipment -Consumer
Διαβάστε περισσότεραNPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
Διαβάστε περισσότεραD-Sub Connectors. Catalog E /08 Edition 2
www.erni.com Catalog E 074573 11/08 Edition 2 www.erni.com www.erni.com Catalog E 074573 11/08 Edition 2 www.erni.com Table of Contents General..............................................................................................2
Διαβάστε περισσότεραCurrent Sensing Chip Resistor
Features -3 atts power rating in 1 att size, 1225 package -Low CR of ±100 PPM/ C -Resistance values from 1m to 1 ohm -High purity alumina substrate for high power dissipation -Long side terminations with
Διαβάστε περισσότεραCMPTER SMA CONNECTORS. ... A Vital Part of Connection World
... A Vital Part of Connection World Receptacles With Accepts Pin Receptacles Metal Through The Wall Receptacles Insulator Through The wall Receptacles Air ine Through The wall Receptacles With Tap Receptacles
Διαβάστε περισσότερα+85 C General Purpose Miniature Aluminum Capacitors
+85 C General Purpose Miniature Aluminum Capacitors Features- Increased CV Efficiency Non Polar Design Available (Special Order) General Specifications- Operating Temperature: -40 to +85 C Voltage Range:
Διαβάστε περισσότεραCEMENT FIXED RESISTORS
Self extinguishing Excellent flame and moisture resistance Extremely small sturdy and mechanically safe Non-inductive types available for all Royal Ohm Cement Types Too low or too high ohmic values on
Διαβάστε περισσότεραPrecision Metal Film Fixed Resistor Axial Leaded
Features EIA standard colour-coding Non-Flame type available Low noise and voltage coefficient Low temperature coefficient range Wide precision range in small package Too low or too high ohmic value can
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Διαβάστε περισσότεραCurrent Sensing Metal Chip Resistor
eatures -SMD designed for automatic insertion -High power rating in small size -Low resistance resistor for current detection -Metal foil construction ensures high reliability and performance with very
Διαβάστε περισσότεραFOR CONNECTING PC BOARD TO PC BOARD
FOR ONNETIN P BOR TO P BOR FN-2(H) SERIES (SUPPORTS HIH-SPEE SINLS) FETURES round contacts are between rows of signal terminals and the connector is covered with a metal ground shell, for impedance matching
Διαβάστε περισσότεραAerovox Corp. Type H High Voltage AC & DC Capacitors. Film Capacitors for Power Electronics Applications. RoHS Compliant. Highlights.
H Aerovox Corp. Film Capacitors for Power Electronics Applications Specifications Outline Drawing Capacitance Range: AC Voltage Range: DC Voltage Range: Temperature Range: Capacitance Tolerance: Dissipation
Διαβάστε περισσότεραDigital motor protection relays
Digital motor protection relays Specification DMP -S & DMP -Sa DMP -T & DMP -Ta Model No. DMP06-S/Sa DMP60-S/Sa DMP06-T/Ta DMP60-T/Ta Wiring Screw type Tunnel type Panel mount Unit or Extension Note1)
Διαβάστε περισσότεραThick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MΩ) THICK FILM ON ALUMINA SUSTRATE,
Διαβάστε περισσότεραData sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Διαβάστε περισσότεραSC Style Optical Connector
SC Style Optical Connector OUTLINE SC connector is a push/pull style connector developed by NTT. The square, snap-in connector latches with a simple push-pull motion and is keyed. It is frequently used
Διαβάστε περισσότεραXA CONNECTOR. 1Certified LR R Disconnectable Crimp style connectors. Features. Specifications. Standards. 2.5mm.
Crimp mm (.09") pitch X CONNECTOR Disconnectable Crimp style connectors Emboss Tape Radial Tape Features Locking device The housing has a locking device to securely hold the header, preventing accidental
Διαβάστε περισσότεραOperating Instructions and Parts Manual 14-inch Woodworking Band Saw Models JWBS-14SF and JWBS-14SF-3
Operating Instructions and Parts Manual 14-inch Woodworking Band Saw Models JWBS-14SF and JWBS-14SF-3 Model #714500 shown JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-714500 Ph.: 800-274-6848
Διαβάστε περισσότεραRSDW08 & RDDW08 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (Typ.) CAPACITOR LOAD (MAX.) RSDW08F-03 344mA 3.3V 2000mA 80% 2000μF RSDW08F-05
Διαβάστε περισσότεραType 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
Διαβάστε περισσότεραHIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
Διαβάστε περισσότεραLowara APPLICATIONS MATERIALS. General Catalogue
FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron and impeller in AISI 36* stainless steel, designed to pump hot, cold and moderately
Διαβάστε περισσότεραSpecifications C2504 SERIES. Standards E E326732
Specifications Current rating:3 C,DC Voltage rating:250v C,DC Temperature range:-40 C~+105 C Contact resistance:20mω Max. Insulation resistance:1000mω Min. Withstanding voltage:1000v C/minute *Compliant
Διαβάστε περισσότεραRod End > Spherical Bearings Product Overview
Rod End > Spherical Bearings Product Overview Table of Contents FMW3E_.4 / NSA8143 FMW3F_.4 / NSA8149 REM REF Page IV-3-4 IV-5-6 IV-7-8 IV-9-10 FMW3E_.4 / NSA8143 Rod End > Spherical Bearings Schematic
Διαβάστε περισσότερα