RJ45-patch cable Cat.7, 600 MHz, 10 GBit/s Corning FutureCom TM S/FTP flex/26 + Hirose TM31

Transcript

1 RJ45-patch cable Cat.7, 600 MHz, 10 GBit/s Corning FutureCom TM S/FTP flex/26 + Hirose TM31 Application as patch cables in patch panels and appliance connection boxes for networks to 10 GBit/s Features and Design Class E A, 500 MHz patch cable, 10 GBit/s PoE fit + after IEEE at 2 x Hirose TM31 RJ45 plug STP, shielded, IEC Corning FuturCom TM S/FTP-cable Li-02YSCH (4x2x0,42L PiMF FRNC) Wiring 1:1 after T568B Anti-kink sleeve with handle protection Length from 0,5m to 50m (The length marking is not verifiable. The tolerance is 1% / +0,04m. It is not proided for testing the specified and calculated in the delivery documentation actual delivery lenght) Available colors Item number color /x,xD1A1 gray /x,xD1A1 yellow /x,xD1A1 green /x,xD1A1 blue /x,xD1A1 red /x,xD1A1 black /x,xD1A1 white x,x is a placeholder for the length 1

2 Technische Daten FutureCom TM S/FTP flex/26 Construction and materials of the cable Cable (componente) according to standard Cat.7 Cable type...s/ftp Cord...Cu-Litze, bright Ø 0,42 mm (AWG 27/7) Isolation...Foam-Skin polyethylen, Ø 0,98 mm Standing element...2 wires to the pair Pair shielding...aluminium coated plastic composite fim Standing...4 pair Braided shield...cu-weave tinned Cable sheath...lshf (FRNC) Outside diameter (guideline)...5,8 mm Copper content...20 kg/km Weight...42 kg/km Mechanical values for cable Bending radius Operation mm Installation mm Tensile load N Chemical properties Conform to RoHS 2011/65/EG Fire behavior Cable Flame retardancy...afer IEC Minimale smoke...after IEC 61034, EN Non-corrosive fire gases...after IEC , EN 50267, VDE Fire load MJ/km Fire load...0,097 kwh/km 2

3 Climate area In the resting state to +60 C (-4 to 140 F) In the agitated state...0 to +50 C (32 to 122 F) Electrical values...20±5 C (68±41 F) Loop resistance 340 Ω/km Resistance unbalance 2% Insulation resistance (500 V) > 5000 MΩ*km Capacity at 800 Hz Nom. 43 nf/km Impedance (1 100) Mhz 100 ± 15 Ω Relative propagation velocity ca. 78 % Signal Propagation time 4,3 ns/100m Skew 10 ns/100m Test voltage (DC, 1min) vein/vein and vein/shield 1000 V at 10 Mhz < 10 mω/m Coupling attenation 92 db 3

4 RJ45-connector Hirose TM 31, Cat MHz Application The RJ45-connector Hirose TM 31 is compatible with all patch panels, outlets, etc.. The RJ45-connector suitable for service neutral cabling and supports 10-GBit-Ethernet. Features and Design The patch cable Draka UC 900 with TM 31 connector is suitable for transmission lines (channellink) to Class E A, 500 MHz, 10GBit s PoE fit after IEEE af and PoE+ after IEEE at stable, compact and fully enclosed polycarbonate housing 360 -shield connection Gilded RJ45-contact area Cable feed on plug straight Modular Plug (component) prepared using standart Cat 6 Technical specifications Mechanical values Material RJ45-contacte...Spring steel, gold-plated contact surface LSA-contacte...CuSn, tinned Permissible wire diameter, wire...awg 24 to AWG 27 Permissible insulation diameter...0,9 to 1,0 mm Min. mating cycles after ISO/IEC min. 200 Dimensions Width...11,7 mm Height...6,6 mm Depth...30,2 mm Transmission technical and electrical values Transmission path (channel-link) to Class E A, 500MHz, 10 GBit s PoE compatible with IEEE af and PoE+ according toieee at Dielectric strength according to IEC V AC / one minute between adjacent contacts Dielectric strength according to IEC V AC / one minute between contact and screen Insulation resistance according to IEC >100MΩ (100 V DC ) Contact resistance according to IEC <70 mω Climate area Use in dry or damp rooms without condensation. Operating temperature range to +60 C (-13 to 140 F) 4

5 Standardize TIA/EIA-568-C.2 ( ) Balanced Twisted-Pair Telecommunications Cabling and Components Standards 5