Data sheet Thin Film Chip Inductor AL Series
|
|
- Θυία Βασιλείου
- 5 χρόνια πριν
- Προβολές:
Transcript
1 Data sheet Thin Film Chip Inductor AL Series Scope and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and superior temperature stability. This highly stable inductor family is specifically designed for critical tolerance needs. Features -Photolithographic single layer ceramic chip -High SRF, excellent Q, superior temperature stability -Tight tolerance of ± 1% or ± 0.1nH -Self resonant frequency controlled within 10% -Stable inductance in high frequency circuit -Highly stable design for critical needs Applications -Cellular Telephone, Pagers and GPS Products -VCO, TCXO Circuit and RF Transceiver Module -Wireless LAN, Bluetooth Module, Communication Appliances Construction C B A D Alumina Substrate External Electrode (Sn) Inner Electrode Edge Electrode (Ni-Cr) Barrier Layer (Ni) Cu Circuits Overcoat Marking Dimensions Unit: mm Type Size (Inch) A B C D Weight (g) (1000pcs) AL ± ± ± ± AL ± ± ± ± AL ± ± ± ±
2 Part Numbering AL 02 G T 10N Product Type Dimensions 01: : : 0603 B: ±0.1nH C: ±0.2nH S: ±0.3nH F: ±1% G: ±2% H: ±3% J: ±5% Packaging Code T: Taping Reel 1N0: 1nH 10N: 10nH 20N8: 20.8nH R10: 100nH :Standard 01: High Current
3 Standard Electrical Specifications AL01 Chip Inductors / Standard Type Quality SRF DCR Factor (nh or %) (GHz) min. (Ω) max. min. 0.1 ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±0.1, 0.2, 0.3nH 8 / 500MHz ±2, ±5% 8 / 500MHz ±2, ±5% 8 / 500MHz ±2, ±5% 8 / 500MHz ±2, ±5% 8 / 500MHz ±2, ±5% 8 / 500MHz ±2, ±5% 8 / 500MHz ±2, ±5% 8 / 500MHz ±2, ±5% 8 / 500MHz (nh) IDC (ma) max.
4 AL01-01 Chip Inductors / High Current Type Quality SRF DCR Factor (nh or %) (GHz) min. (Ω) max. min. 0.1 ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10/ 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz ±0.1, 0.2, 0.3nH 10 / 500MHz (nh) IDC (ma) max.
5 AL02 Chip Inductors / Standard Type (nh) (nh or %) Quality Factor min. SRF (GHz) min. DCR (Ω) max. IDC (ma) max. 0.2 ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±0.1, 0.2, 0.3nH 13 / 500MHz ±1, 2, 3, 5% 13 / 500MHz ±1, 2, 3, 5% 13 / 500MHz ±1, 2, 3, 5% 13 / 500MHz ±1, 2, 3, 5% 13 / 500MHz ±1, 2, 3, 5% 13 / 500MHz ±1, 2, 3, 5% 13 / 500MHz ±1, 2, 3, 5% 13 / 500MHz ±1, 2, 3, 5% 13 / 500MHz ±1, 2, 3, 5% 13 / 500MHz ±1, 2, 3, 5% 13 / 500MHz ±5% 13 / 500MHz
6 AL03 Chip Inductors / Standard Type (nh) (nh or %) Quality Factor min. SRF (GHz) min. DCR (Ω) max. IDC (ma) max. 1.0 ±0.1, 0.2, 0.3nH 15 / 300MHz ±0.1, 0.2, 0.3nH 15 / 300MHz ±0.1, 0.2, 0.3nH 15 / 300MHz ±0.1, 0.2, 0.3nH 15 / 300MHz ±0.1, 0.2, 0.3nH 15 / 300MHz ±0.1, 0.2, 0.3nH 15 / 300MHz ±0.1, 0.2, 0.3nH 15 / 300MHz ±0.1, 0.2, 0.3nH 15 / 300MHz ±0.1, 0.2, 0.3nH 15 / 300MHz ±0.1, 0.2, 0.3nH 15 / 300MHz ±0.1, 0.2, 0.3nH 15 / 300MHz ±0.1, 0.2, 0.3nH 15 / 300MHz ±1, 2, 3, 5% 15 / 300MHz ±1, 2, 3, 5% 15 / 300MHz ±1, 2, 3, 5% 15 / 300MHz ±1, 2, 3, 5% 15 / 300MHz ±1, 2, 3, 5% 15 / 300MHz ±1, 2, 3, 5% 15 / 300MHz ±1, 2, 3, 5% 15 / 300MHz ±1, 2, 3, 5% 15 / 300MHz ±1, 2, 3, 5% 15 / 300MHz ±1, 2, 3, 5% 15 / 300MHz ±1, 2, 3, 5% 15 / 300MHz ±2, 3, 5% 15 / 300MHz
7 Environmental Characteristics Insulation Resistance Damp Heat with Load Bending Strength Solderability Resistance to Soldering Heat Item Requirement Test Method As Spec. >1000MΩ As Spec. 95% min. coverage Dielectric Withstand Voltage >100V High Temperature Exposure Low Temperature Storage Temperature Cycle Storage Temperature: 25±3 C; Humidity < 80%RH Measuring equipment and fixture: 0201: HP4287+Agilent 16196C 0402: HP4287+Agilent 16196B 0603: HP4287+Agilent 16196A MIL-STD-202 Method 302 Apply 100V DC for 1minute MIL-STD-202 Method 103B 402C, 90~95% R.H. Max. working voltage for 1000 hrs with 1.5 hrs ON and 0.5 hrs OFF JIS-C Bending Amplitude 3mm for 10 seconds MIL-STD-202 Method 208H 245±5 C for 3 seconds MIL-STD-202 Method 210E 260±5 C for 10 seconds MIL-STD-202 Method 301 Apply 100VA (rms) for 1minute JIS-C ±2 C, /-0 hours JIS-C ±3 C, /-0 hours JIS-C /RT/85/RT, 10 cycles Reflow
8 Packaging Reel Specifications & Packaging Quantity Unit: mm Type ψa ψb ψc W T Quantity (EA) AL01 178± ± ± ±1.0 10,000 AL02 178± ± ± ±1.0 10,000 AL03 178± ± ± ±1.0 5,000 Paper Tape Specifications B ottom T ape Top Tape ψ D 0 A B E F W T Paper Tape R esistor P 1 P 2 P 0 direction of unreeling Unit: mm A B W E F P0 P1 P2 ψd0 T AL ± ± ± ± ± ± ± ± ± ±0.02 AL ± ± ± ± ± ± ± ± ± ±0.03 AL ± ± ± ± ± ± ± ± ± ±0.03 Remark:Test Method Test direction:bar mark faces left Recommend Land Pattern Unit: mm Type A B C C AL ±0.2 AL ±0.2 AL ±0.2 B A
Thin Film Chip Inductor
Scope -Calchip s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Calchip s design provides high, excellent Q, and superior temperature stability. This highly
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
Διαβάστε περισσότεραAL Series - Thin Film Chip Inductor
Features A Photo Lithographic Single Layer Ceramic Chip High SRF, Excellent, Superior Temperature Stability Tight Tolerance of ± % or ±.nh Self Resonant Frequency Controlled within % Stable Inductance
Διαβάστε περισσότεραCurrent Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Διαβάστε περισσότεραMAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
Διαβάστε περισσότεραSMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
Διαβάστε περισσότεραThin Film Precision Chip Resistor-AR Series
hin Film Precision Chip Resistor-AR Series Construction L D1 3 4 5 6 D2 9 8 7 1 2 1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Διαβάστε περισσότεραData sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
Διαβάστε περισσότεραThin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to ±5PPM/C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
Διαβάστε περισσότεραCurrent Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
Διαβάστε περισσότεραThin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to PPM/ C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
Διαβάστε περισσότεραCSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Διαβάστε περισσότερα1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat (Epoxy)
ARN series Thin Film High Precision Chip Resistor Features» Advanced thin film technology» Very tight tolerance down to ±0.01%» Extremely low TCR down to ±5ppm/» Wide resistance range 1ohm-3Mega ohm» Miniature
Διαβάστε περισσότεραMultilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Διαβάστε περισσότεραData Sheet. Customer: Current Sensing Thick Film Chip Resistor - RS Series Size: 0402/0603/0805/1206/1210/2010/2512. Accepted by (QC) Approved by
Data Sheet Customer: Product: Current Sensing Thick Film Chip Resistor - RS Series Size: 0402/0603/0805/1206/1210/2010/2512 Issued Date: 01-Jun-10 Edition: REV.A5 Produced by Checked Approved by Prepared
Διαβάστε περισσότερα4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
Διαβάστε περισσότεραThick Film Array Chip Resistor
CN Series Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Reduction of assembly costs and
Διαβάστε περισσότεραSMD - Resistors. Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612 official distributor of 1. Scope Thick Film Chip Resistor-SMDC Series -This specification applies
Διαβάστε περισσότεραHIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
Διαβάστε περισσότεραHigh Voltage Thick Film Chip Resistor
Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Highly reliable multilayer electrode construction -Higher component and
Διαβάστε περισσότεραTrimmable Thick Film Chip Resistor
rimmable hick ilm Chip Resistor R Series rimmable hick ilm Chip Resistor Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. eatures
Διαβάστε περισσότεραThick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512 official distributor of Thick Film Chip Resistor-SMDC Series 1. Scope -This specification applies to all
Διαβάστε περισσότεραCurrent Sensing Chip Resistor
Features -3 atts power rating in 1 att size, 1225 package -Low CR of ±100 PPM/ C -Resistance values from 1m to 1 ohm -High purity alumina substrate for high power dissipation -Long side terminations with
Διαβάστε περισσότεραCSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Διαβάστε περισσότεραTHICK FILM CHIP RESISTOR" CAL-CHIP ELECTRONICS INC."
THICK FILM CHIP RESISTOR CAL-CHIP ELECTRONICS INC. CAL-CHIP SERIES: RM SERIES 1 2 3 INTRODUCTION SCOPE Applies to all sizes of rectangular-type fixed chip resistors with Ruthenium base as material. FEATURES
Διαβάστε περισσότεραCurrent Sensing Metal Chip Resistor
eatures -SMD designed for automatic insertion -High power rating in small size -Low resistance resistor for current detection -Metal foil construction ensures high reliability and performance with very
Διαβάστε περισσότεραAnti-Sulfurated Thick Film Chip Resistor
S Series Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Special construction to prevent sulfuration in a sulfur containing
Διαβάστε περισσότεραThick Film Chip Resistor
CR Series Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Highly reliable multilayer electrode
Διαβάστε περισσότεραCurrent Sense Metal Strip Resistors (CSMS Series)
Features: Range: 1mΩ to 100mΩ Low TCR as low as 75PPM High power rating Custom Values available RoHS Compliant and Halogen Free Operating Temperature: -55 C to +170 C Part Number Structure CSMS 0805 -
Διαβάστε περισσότεραThick Film Chip Resistor
CR Series Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Highly reliable multilayer electrode
Διαβάστε περισσότεραRC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
Διαβάστε περισσότεραThin Film Precision Chip Resistor-AR Series
hin Film Precision hip Resistor-R Series Features -hin film passivated ir resistor -Very tight tolerance down to ±0.01% -Extremely low R down to ±5 PPM/ -ide resistance range 1ohm ~ 3Meg ohm -Miniature
Διαβάστε περισσότεραNo Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Διαβάστε περισσότεραRS Series Current Sensing Thick Film Chip Resistor Current Sensing Thick Film Chip Resistor
Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. eatures -Low inductance -Highly reliable multilayer electrode construction -Higher
Διαβάστε περισσότεραThick Film Chip Resistor
Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Small size and light weight -Highly reliable multilayer electrode construction
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
Διαβάστε περισσότεραYAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.
YAGEO CORPORATION SMD INDUCTOR / BEADS CLH Series Multilayer Chip Inductors High Frequency Lead-free / For High Frequency Applications APPLICATIONS RF Resonance and Impedance Matching Circuit RF and Wireless
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
Διαβάστε περισσότεραCarbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
Διαβάστε περισσότεραThin Film Precision Chip Resistor-AR Series
hin Film Precision hip Resistor-R Series Features -hin Film Passivated ir Resistor -Very ight olerance from ±0.01%~1% -Extremely Low R from ±5~ PPM/ -ide R-Value onstruction Marking pplications -Medical
Διαβάστε περισσότεραCSKA series. Current Sensing Chip Resistor Automotive. Features. Applications. Construction FAITHFUL LINK
CSKA series Current Sensing Chip Resistor Automotive Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate
Διαβάστε περισσότεραData Sheet. Size: 0201/0402/0603/0805/1206/1210/2010/2512 VIKING TECH CORPORATION KAOHSIUNG BRANCH 光頡科技股份有限公司高雄分公司
Data Sheet Customer: Product : Thin Film Precision Chip Resistor - AR Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 Issued Date: 19-Aug-10 Edition : REV.C6 VIKING TECH CORPORATION 光頡科技股份有限公司 No.70,
Διαβάστε περισσότεραAutomotive Grade Thin Film Precision Chip Resistor
Features Construction D1 L -AEC-Q200 Compliance -Advanced thin film technology -RoHS compliant - Special materials, design, and processing for high sulfur applications - Test proven immunity to humidity,
Διαβάστε περισσότεραHigh Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
Διαβάστε περισσότεραRoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. PRODUCT DETAIL Electrical Characteristics μh L (Min) Q MHz (Min) SRF Ω DCR IDC ma TEST FREQ: MHz TEST LEVEL: 100 mv Test Instruments HP4291
Διαβάστε περισσότεραThin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Διαβάστε περισσότεραWLCW1005 SMD Wire Wound Ceramic Chip Inductors
WCW1005 SMD Wire Wound Ceramic Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WCW1005 Series_V5.0 Mar. 2016 Features 1. Standard chip size bobbin with
Διαβάστε περισσότεραWIRE WOUND CHIP INDUCTORS
FEATURES High Self-Resonance Frequency Stable inductance at high frequency Tight inductance tolerance High Q factory High current Low DCR APPLICATIONS Antenna amplifiers Mobile phone Key entry GPS (Global
Διαβάστε περισσότεραPb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. FEATURES The monolithic construction performs high reliability and ensures a closed magnetic flux in a component avoids magnetic and interference
Διαβάστε περισσότεραSMD Wire Wound Ferrite Chip Inductors - SQC Series. SQC Series. Product Identification. Shapes and Dimensions
SMD Wire Wound Ferrite Chip Inductors - SQC Series SQC Series These miniature chip inductors, SQC Series, wound on a special ferrite core and are excellent to be used as choke coil in DC power supply circuits.
Διαβάστε περισσότεραThick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MW) THICK FILM ON ALUMINA SUSTRATE,
Διαβάστε περισσότεραSMD Wire Wound Chip Inductor
Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors -ow profile, high current are available
Διαβάστε περισσότεραSMD Wire Wound Chip Inductor
Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors -ow profile, high current are available
Διαβάστε περισσότεραSMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008
SMD Wire Wound Ferrite Chip Inductors - LS Series LS Series LS Series is the newest in open type ferrite wire wound chip inductors. The wire wound ferrite construction supports higher SRF, lower DCR and
Διαβάστε περισσότεραData Sheet. Customer: Current Sensing Chip Resistor CS Series Size: 0201/0402/0603/0805/1206/1210/2010/ /3720/7520/0612
Data Sheet Customer: Product: CS Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 1225/3720/7520/0612 Issued Date: Edition: 27-Jul-18 REV.D5 VIKING ECH CORPORION VIKING ECH CORPORION KOHSIUNG RNCH
Διαβάστε περισσότεραPower Inductor LVS Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering LVS 6645 L - 1R M - AU Series Name Dimensions Code Inductance Internal Code (mm) (uh) Tolerance 4412 4.x4.x1.2 L Low DCR R47.47 M ±% 4418 4.x4.x1.8
Διαβάστε περισσότεραAutomotive Grade Chip Resistor-CR..A Series
CR.. Series -CR.. Series Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -EC-Q200 Compliance -Highly reliable multilayer
Διαβάστε περισσότεραThick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MΩ) THICK FILM ON ALUMINA SUSTRATE,
Διαβάστε περισσότεραHigh Voltage Thick Film Chip Resistor. RCV Series. Features. Applications. Construction
High Voltage Thick Film Chip Resistor High Voltage Thick Film Chip Resistor Features Highly reliable multilayer electrode construction High component and equipment reliability Excellent performance at
Διαβάστε περισσότεραAutomotive Grade Anti-Sulfurated Chip Resistor
Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Special construction to prevent sulfuration in a sulfur containing environment
Διαβάστε περισσότεραData Sheet. VIKING TECH CORPORATION KAOHSIUNG BRANCH 光頡科技股份有限公司高雄分公司 No.248-3, Sin-Sheng Rd., Cian-Jhen Dist., Kaohsiung, 806, Taiwan
Data Sheet Customer: Product: Thick Film Chip Resistor - CR Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/ 2512 Issued Date: Edition: 15-Mar-12 REV.B4 VIKING TECH CORPORATION 光頡科技股份有限公司 No.70,
Διαβάστε περισσότεραCal-Chip Electronics, Incorporated Multilayer Chip Inductors For High Frequency
Cal-Chip Electronics, Incorporated Multilayer Chip Inductors For High GHF SERIES FEATURES Multilayer inductor made of advanced ceramics with low-resistivity silver used as internal conductors provides
Διαβάστε περισσότεραNo item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor
FEATURE Operating Temperature: -40 C ~ +125 C Storage Temperature: 15~28 C; Humidity < 80%RH Ceramic base provide high SRF Ultra-compact inductors provide high Q factors Low profile, high current are available
Διαβάστε περισσότεραFixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Διαβάστε περισσότεραMetal Film Flame-Proof Resistors
Features -Low Noise -Low TCR from ±15~100PPM/ -High Precision from ±0.1%~1% -Complete Flameproof Construction UL-1412. -Coating meets UL94V-0 Applications -Telecommunication -Medical Equipment -Consumer
Διαβάστε περισσότεραSMD Power Inductor-VLH
SMD Power Inductor-VH Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 321618C 3.2±0.3 1.6±0.2
Διαβάστε περισσότεραFeature. shock and pressure. -Tighter tolerance down to ±2% -Smaller size of 0402 (1005) -CATV Filter, Tuner. -Cable Modem/ XDSL Tuner.
Wire Wound Chip Inductor-WL Series Feature -Wire wound ceramic construction provide high SRF -Ultra-compact inductors provide exceptional Q values -Low profile, high current are available -Miniature SMD
Διαβάστε περισσότεραData Sheet. Customer: Thick Film Chip Resistor - CR Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612
Data Sheet Customer: Product: - CR Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612 Issued Date: Edition: 12-Jan-18 REV.C4 VIKING ECH CORPORAION VIKING ECH CORPORAION KAOHSIUNG BRANCH
Διαβάστε περισσότεραMelf Carbon Film Resistor MMC Series
Melf Resistor Melf Carbon Film Resistor MMC Series Coating color: Beige Features - Tolerance up to ±2%. - Wide resistance range:1ω to 10MΩ. Type Dimension TYPE L D C S 0102 2.00±0.10 1.30±0.10 0.55±0.10
Διαβάστε περισσότεραFixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Διαβάστε περισσότεραTHICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Διαβάστε περισσότεραYJM-L Series Chip Varistor
Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
Διαβάστε περισσότεραSPECIFICATIONS. Automotive Grade Current Sensing Chip Resistor. CS..A-Serie SWISSDIS. Swissdis AG Grasweg 7 CH-4911 Schwarzhäusern
SISSDIS Swissdis G Grasweg 7 CH-4911 Schwarzhäusern el.: +41 62 919 44 00 Fax: +41 62 919 44 01 info@swissdis.ch www.swissdis.ch SPECIFICIONS CS..-Serie Version July 2016 Features -EC-Q200 Compliance -Highly
Διαβάστε περισσότεραMetal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
Διαβάστε περισσότεραSMD Power Inductor-VLH
SMD Power Inductor-VH PAD AYOUT Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252510 2.5±0.2
Διαβάστε περισσότεραAutomotive Grade Chip Resistor-CR..A Series
CR.. Series -CR.. Series Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -EC-Q200 Compliance -Highly reliable multilayer
Διαβάστε περισσότεραB37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Διαβάστε περισσότεραMultilayer Chip Inductor / CL TYPE
Multilayer Chip Inductor / CL TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no lead
Διαβάστε περισσότεραLR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Διαβάστε περισσότεραData Sheet. Customer: High Voltage Thick Film Chip Resistor - HVR Series Size: 0402/0603/0805/1206/2010/2512
Data Sheet Customer: Product: - HVR Series Size: 0402/0603/0805/1206/2010/2512 Issued Date: Edition: 15-Jul-16 REV.2 VIKING ECH CORPORION 光頡科技股份有限公司 No.70 Guangfu N. Rd., Hukou ownship, Hsinchu County
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Διαβάστε περισσότεραHFC SERIES High Freq. Wound Ceramic Chip Inductors
FEATURES High frequency applications. Low DC resistance and high allowable DC current. Close tolerance application.2% tolerence is available for particular inductance values. Small footprint as well as
Διαβάστε περισσότερα2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
Διαβάστε περισσότεραHigh Current Chip Ferrite Bead MHC Series
High Current Chip Ferrite Bead MHC Series Features Combination of high frequency noise suppression with capability of handing high current. The current rating up to 6 Amps with low DC. Applications High
Διαβάστε περισσότεραWire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 2012 [0805] 2520 [1008] 3216 [1206] 3225 [1210]
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -4 ~+85 FEATURES Small chip suitable for surface mounting High inductance with ferrite material APPLICATIONS Video cameras, liquid crystal
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Διαβάστε περισσότεραData Sheet. Customer: Anti-Sulfurated Thick Film Chip Resistor - AS Series Size: 0201/0402/0603/0805/1206/1210/2010/2512
Data Sheet Customer: Product: - S Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 Issued Date: Edition: 31-Oct-16 REV.5 VIKING ECH CORPORION 光頡科技股份有限公司 No.70 Guangfu N. Rd., Hukou ownship, Hsinchu
Διαβάστε περισσότεραWire Wound Chip Ceramic Inductor SDWL-C Series Operating Temp. : -40 ~ N
Wire Wound Chip Ceramic Inductor SDWL-C Series Operating Temp. : -4 ~+25 FEATURES Small chip suitable for surface mounting High value and high self-resonant frequency with ceramic material Tight inductance
Διαβάστε περισσότεραIWCSeries FEATURES APPLICATION ORDERING CODE TRIGON COMPONENTS. Configurations: Dimension (mm) IWC C G 1608 K 22N T (1) (2) (3) (4) (5) (6) (7)
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Διαβάστε περισσότεραAutomotive Grade Chip Resistor-CR..A Series
www.helisto.com CR.. Series -CR.. Series Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. eatures -C-Q200 Compliance -Highly reliable
Διαβάστε περισσότεραThin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) RoHS Compliant includes all homogeneous
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Διαβάστε περισσότεραWIRE-WOUND CHIP INDUCTOR FERRITE/OPENTYPE
WIRE-WOUND CHIP INDUCTOR FERRITE/OPENTYPE 0805CS (2012) Ferrite Series (0.12~33µH) Part Number Inductance µh Percent Tolerance Q Min SRF Min MHz RDC Max Ohms IDC Max ma Color Code 0805CS-121E_FS 0.12@
Διαβάστε περισσότεραThin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) Type EI Size Power Rating at 70
Διαβάστε περισσότεραSunlord Specifications subject to change without notice. Please check our website for latest information. Revised 2018/04/15
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
Διαβάστε περισσότερα