Solid-Electrolyte TANTALEX Capacitors Hermetically-Sealed, Axial-Lead
|
|
- Λάχεσις Δαμασκηνός
- 7 χρόνια πριν
- Προβολές:
Transcript
1 150D Solid-Electrolyte TANTALEX Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to + 85 C. (To C with voltage derating.) Capacitance Tolerance: At 120 Hz, + 25 C. ± 20 %, ± 10 % standard. ± 5 % available as special. Dissipation Factor: At 120 Hz, + 25 C. Dissipation factor, as determined from the expression 2πfRC, shall not exceed the values listed in the Standard Ratings Tables. DC Leakage Current (DCL Max.): At + 25 C: Leakage current shall not exceed the values listed in the Standard Ratings Tables. DIMENSIONS in inches [millimeters] FEATURES Terminations: Tin/lead (SnPb), 100 % Tin (RoHS compliant) These high performance, hermetically-sealed TANTALEX capacitors have set the standard for solid-electrolyte tantalum capacitors for more than three decades. Available RoHS* COMPLIANT High capacitance, low DCL, low dissipation factor and exceptional operating stability. Performance and reliability have been proven in commercial, industrial and military applications. Available in four case codes and capacitors and are supplied with plastic-film insulation. Terminals are solid, tinned nickel wire leads. The Military equivalent to the 150D is the CSR13 which is qualified to MIL-C-39003/01. At + 85 C: Leakage current shall not exceed 10 times the values listed in the Standard Ratings Tables. At +125 C: Leakage shall not exceed 15 times the values listed in the Standard Ratings Tables. Life Test: Capacitors shall withstand rated DC voltage applied at + 85 C for 2000 hours or derated DC voltage applied at C for 1000 hours Following the life test: 1. DCL shall not exceed 125 % of the initial requirement. 2. Dissipation Factor shall meet the initial requirement. 3. Change in capacitance shall not exceed ± 5 % ± ± [38.10 ± 6.35] D [38.10 ± 6.35] L DIA. A B R S WITH INSULATING SLEEVE** D ± [3.43 ± 0.41] ± [4.70 ± 0.41] ± [7.34 ± 0.41] ± [8.92 ± 0.41] SOLID TINNED NICKEL LEADS J (MAXIMUM) Notes * Pb containing terminations are not Rohs compliant, exemptions may apply ** When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body L ± [7.26 ± 0.79] ± [12.04 ± 0.79] ± [17.42 ± 0.79] ± [19.96 ± 0.79] J MAX [10.720] [15.490] [20.880] [23.420] [1.19] MAX [3.18] MAX. AWG NO LEAD SIZE NOMINAL DIAMETER [0.51] [0.51] [0.64] [0.64] For technical questions, contact: tantalum@vishay.com Document Number: Revision: 11-May-07
2 Solid-Electrolyte TANTALEX Capacitors 150D ORDERING INFORMATION 150D 224 X0 006 A 2 T E3 MODEL CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING CASE CODE STYLE NUMBER PACKAGING ROHS COMPLIANT This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = ± 20 % X9 = ± 10 % *X5 = ± 5 % *Special Order. This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. See Ratings and Case Codes Table. 0 = No Sleeve 2 = Insulated sleeve. B = Bulk T = Tape and Reel E3 = 100 % Tin termination (RoHS compliant) Blank = SnPb termination PART NUMBER PART NUMBER 6 WVDC AT + 85 C, SURGE = 8 V... 4 WVDC AT C, SURGE = 5 V 0.22 A 150D224X0006A2 150D224X9006A A - 150D274X9006A A 150D334X0006A2 150D334X9006A A - 150D394X9006A A 150D474X0006A2 150D474X9006A A - 150D564X9006A A 150D684X0006A2 150D684X9006A A - 150D824X9006A A 150D105X0006A2 150D105X9006A A - 150D125X9006A A 150D155X0006A2 150D155X9006A A - 150D185X9006A A 150D225X0006A2 150D225X9006A A - 150D275X9006A A 150D335X0006A2 150D335X9006A A - 150D395X9006A A 150D475X0006A2 150D475X9006A A - 150D565X9006A A 150D685X0006A2 150D685X9006A B - 150D825X9006B B 150D106X0006B2 150D106X9006B B - 150D126X9006B B 150D156X0006B2 150D156X9006B B - 150D186X9006B B 150D226X0006B2 150D226X9006B B - 150D276X9006B B 150D336X0006B2 150D336X9006B B - 150D396X9006B B 150D476X0006B2 150D476X9006B B - 150D566X9006B R 150D686X0006R2 150D686X9006R R - 150D826X9006R R 150D107X0006R2 150D107X9006R R 150D127X0006R2 150D127X9006R R 150D157X0006R2 150D157X9006R R 150D187X0006R2 150D187X9006R S 150D227X0006S2 150D227X9006S S 150D277X0006S2 150D277X9006S S 150D337X0006S2 150D337X9006S Document Number: For technical questions, contact: tantalum@vishay.com Revision: 11-May-07 2
3 150D Solid-Electrolyte TANTALEX Capacitors 10 WVDC AT + 85 C, SURGE = 13 V... 7 WVDC AT C, SURGE = 9 V 0.22 A 150D224X0010A2 150D224X9010A A - 150D274X9010A A 150D334X0010A2 150D334X9010A A - 150D394X9010A A 150D474X0010A2 150D474X9010A A - 150D564X9010A A 150D684X0010A2 150D684X9010A A - 150D824X9010A A 150D105X0010A2 150D105X9010A A - 150D125X9010A A 150D155X0010A2 150D155X9010A A - 150D185X9010A A 150D225X0010A2 150D225X9010A A - 150D275X9010A A 150D335X0010A2 150D335X9010A A - 150D395X9010A A 150D475X0010A2 150D475X9010A B - 150D565X9010B B 150D685X0010B2 150D685X9010B B - 150D825X9010B B 150D106X0010B2 150D106X9010B B - 150D126X9010B B 150D156X0010B2 150D156X9010B B - 150D186X9010B B 150D226X0010B2 150D226X9010B B - 150D276X9010B B 150D336X0010B2 150D336X9010B B - 150D396X9010B R 150D476X0010R2 150D476X9010R R - 150D566X9010R R 150D686X0010R2 150D686X9010R R - 150D826X9010R R 150D107X0010R2 150D107X9010R R 150D127X0010R2 150D127X9010R S 150D157X0010S2 150D157X9010S S 150D187X0010S2 150D187X9010S S 150D227X0010S2 150D227X9010S WVDC AT + 85 C, SURGE = 20 V WVDC AT C, SURGE = 12 V 0.22 A 150D224X0015A2 150D224X9015A A - 150D274X9015A A 150D334X0015A2 150D334X9015A A - 150D394X9015A A 150D474X0015A2 150D474X9015A A - 150D564X9015A A 150D684X0015A2 150D684X9015A A - 150D824X9015A A 150D105X0015A2 150D105X9015A A - 150D125X9015A A 150D155X0015A2 150D155X9015A A - 150D185X9015A A 150D225X0015A2 150D225X9015A A - 150D275X9015A A 150D335X0015A2 150D335X9015A B - 150D395X9015B B 150D475X0015B2 150D475X9015B For technical questions, contact: tantalum@vishay.com Document Number: Revision: 11-May-07
4 Solid-Electrolyte TANTALEX Capacitors 150D 15 WVDC AT + 85 C, SURGE = 20 V WVDC AT C, SURGE = 12 V 5.6 B - 150D565X9015B B 150D685X0015B2 150D685X9015B B - 150D825X9015B B 150D106X0015B2 150D106X9015B B - 150D126X9015B B 150D156X0015B2 150D156X9015B B - 150D186X9015B B 150D226X0015B2 150D226X9015B R - 150D276X9015R R 150D336X0015R2 150D336X9015R R - 150D396X9015R R 150D476X0015R2 150D476X9015R R - 150D566X9015R R 150D686X0015R2 150D686X9015R S - 150D826X9015S S 150D107X0015S2 150D107X9015S S 150D127X0015S2 150D127X9015S S 150D157X0015S2 150D157X9015S WVDC AT + 85 C, SURGE = 26 V WVDC AT C, SURGE = 16 V A - 150D273X9020A A 150D333X0020A2 150D333X9020A A - 150D393X9020A A 150D473X0020A2 150D473X9020A A - 150D563X9020A A 150D683X0020A2 150D683X9020A A - 150D823X9020A A 150D104X0020A2 150D104X9020A A - 150D124X9020A A 150D154X0020A2 150D154X9020A A - 150D184X9020A A 150D224X0020A2 150D224X9020A A - 150D274X9020A A 150D334X0020A2 150D334X9020A A - 150D394X9020A A 150D474X0020A2 150D474X9020A A - 150D564X9020A A 150D684X0020A2 150D684X9020A A - 150D824X9020A A 150D105X0020A2 150D105X9020A A - 150D125X9020A A 150D155X0020A2 150D155X9020A A - 150D185X9020A A 150D225X0020A2 150D225X9020A B - 150D275X9020B B 150D335X0020B2 150D335X9020B B - 150D395X9020B B 150D475X0020B2 150D475X9020B B - 150D565X9020B B 150D685X0020B2 150D685X9020B B - 150D825X9020B B 150D106X0020B2 150D106X9020B B - 150D126X9020B B 150D156X0020B2 150D156X9020B Document Number: For technical questions, contact: tantalum@vishay.com Revision: 11-May-07 4
5 150D Solid-Electrolyte TANTALEX Capacitors 20 WVDC AT + 85 C, SURGE = 26 V WVDC AT C, SURGE = 16 V 18.0 R - 150D186X9020R R 150D226X0020R2 150D226X9020R R - 150D276X9020R R 150D336X0020R2 150D336X9020R R - 150D396X9020R R 150D476X0020R2 150D476X9020R S - 150D566X9020S S 150D686X0020S2 150D686X9020S S - 150D826X9020S S 150D107X0020S2 150D107X9020S WVDC AT + 85 C, SURGE = 46 V WVDC AT C, SURGE = 28 V A - 150D273X9035A A 150D333X0035A2 150D333X9035A A - 150D393X9035A A 150D473X0035A2 150D473X9035A A - 150D563X9035A A 150D683X0035A2 150D683X9035A A - 150D823X9035A A 150D104X0035A2 150D104X9035A A - 150D124X9035A A 150D154X0035A2 150D154X9035A A - 150D184X9035A A 150D224X0035A2 150D224X9035A A - 150D274X9035A A 150D334X0035A2 150D334X9035A A - 150D394X9035A A 150D474X0035A2 150D474X9035A A - 150D564X9035A A 150D684X0035A2 150D684X9035A A - 150D824X9035A A 150D105X0035A2 150D105X9035A B - 150D125X9035B B 150D155X0035B2 150D155X9035B B - 150D185X9035B B 150D225X0035B2 150D225X9035B B - 150D275X9035B B 150D335X0035B2 150D335X9035B B - 150D395X9035B B 150D475X0035B2 150D475X9035B B - 150D565X9035B B 150D685X0035B2 150D685X9035B R - 150D825X9035R R 150D106X0035R2 150D106X9035R R - 150D126X9035R R 150D156X0035R2 150D156X9035R R - 150D186X9035R R 150D226X0035R2 150D226X9035R S - 150D276X9035S S 150D336X0035S2 150D336X9035S S - 150D396X9035S S 150D476X0035S2 150D476X9035S For technical questions, contact: tantalum@vishay.com Document Number: Revision: 11-May-07
6 Solid-Electrolyte TANTALEX Capacitors 150D 50 WVDC AT + 85 C, SURGE = 65 V WVDC AT C, SURGE = 40 V A - 150D273X9050A A 150D333X0050A2 150D333X9050A A - 150D393X9050A A 150D473X0050A2 150D473X9050A A - 150D563X9050A A 150D683X0050A2 150D683X9050A A - 150D823X9050A A 150D104X0050A2 150D104X9050A A - 150D124X9050A A 150D154X0050A2 150D154X9050A A - 150D184X9050A A 150D224X0050A2 150D224X9050A A - 150D274X9050A A 150D334X0050A2 150D334X9050A A - 150D394X9050A A 150D474X0050A2 150D474X9050A A - 150D564X9050A A 150D684X0050A2 150D684X9050A A - 150D824X9050A A 150D105X0050A2 150D105X9050A B - 150D125X9050B B 150D155X0050B2 150D155X9050B B - 150D185X9050B B 150D225X0050B2 150D225X9050B B - 150D275X9050B B 150D335X0050B2 150D335X9050B B - 150D395X9050B B 150D475X0050B2 150D475X9050B R - 150D565X9050R R 150D685X0050R2 150D685X9050R R - 150D825X9050R R 150D106X0050R2 150D106X9050R R - 150D126X9050R R 150D156X0050R2 150D156X9050R R - 150D186X9050R S 150D226X0050S2 150D226X9050S WVDC AT + 85 C, SURGE = 98 V WVDC AT C, SURGE = 64 V A - 150D273X9075A A 150D333X0075A2 150D333X9075A A - 150D393X9075A A 150D473X0075A2 150D473X9075A A - 150D563X9075A A 150D683X0075A2 150D683X9075A A - 150D823X9075A A 150D104X0075A2 150D104X9075A A - 150D124X9075A A 150D154X0075A2 150D154X9075A A - 150D184X9075A A 150D224X0075A2 150D224X9075A A - 150D274X9075A A 150D334X0075A2 150D334X9075A A - 150D394X9075A A 150D474X0075A2 150D474X9075A A - 150D564X9075A Document Number: For technical questions, contact: tantalum@vishay.com Revision: 11-May-07 6
7 150D Solid-Electrolyte TANTALEX Capacitors 75 WVDC AT + 85 C, SURGE = 98 V WVDC AT C, SURGE = 64 V 0.68 A 150D684X0075A2 150D684X9075A B - 150D824X9075B B 150D105X0075B2 150D105X9075B B - 150D125X9075B B 150D155X0075B2 150D155X9075B B - 150D185X9075B B 150D225X0075B2 150D225X9075B B - 150D275X9075B B 150D335X0075B2 150D335X9075B B - 150D395X9075B R 150D475X0075R2 150D475X9075R R - 150D565X9075R R 150D685X0075R2 150D685X9075R R - 150D825X9075R R 150D106X0075R2 150D106X9075R S - 150D126X9075S S 150D156X0075S2 150D156X9075S WVDC AT + 85 C, SURGE = 130 V WVDC AT C, SURGE = 86 V A - 150D273X9100A A 150D333X0100A2 150D333X9100A A - 150D393X9100A A 150D473X0100A2 150D473X9100A A - 150D563X9100A A 150D683X0100A2 150D683X9100A A - 150D823X9100A A 150D104X0100A2 150D104X9100A A - 150D124X9100A A 150D154X0100A2 150D154X9100A A - 150D184X9100A A 150D224X0100A2 150D224X9100A A - 150D274X9100A A 150D334X0100A2 150D334X9100A A - 150D394X9100A A 150D474X0100A2 150D474X9100A A - 150D564X9100A B 150D684X0100B2 150D684X9100B B - 150D824X9100B B 150D105X0100B2 150D105X9100B B - 150D125X9100B B 150D155X0100B2 150D155X9100B B - 150D185X9100B B 150D225X0100B2 150D225X9100B B - 150D275X9100B R 150D335X0100R2 150D335X9100R R - 150D395X9100R R 150D475X0100R2 150D475X9100R R - 150D565X9100R R 150D685X0100R2 150D685X9100R S 150D825X0100S2 150D825X9100S S 150D106X0100S2 150D106X9100S For technical questions, contact: tantalum@vishay.com Document Number: Revision: 11-May-07
8 Solid-Electrolyte TANTALEX Capacitors 150D 125 WVDC AT + 85 C, SURGE = 140 V WVDC AT C, SURGE = 94 V A - 150D273X9125A A 150D333X0125A2 150D333X9125A A - 150D393X9125A A 150D473X0125A2 150D473X9125A A - 150D563X9125A A 150D683X0125A2 150D683X9125A A - 150D823X9125A A 150D104X0125A2 150D104X9125A A - 150D124X9125A A 150D154X0125A2 150D154X9125A A - 150D184X9125A A 150D224X0125A2 150D224X9125A A - 150D274X9125A A 150D334X0125A2 150D334X9125A A - 150D394X9125A A 150D474X0125A2 150D474X9125A B - 150D564X9125B B 150D684X0125B2 150D684X9125B B - 150D824X9125B B 150D105X0125B2 150D105X9125B B - 150D125X9125B B 150D155X0125B2 150D155X9125B B - 150D185X9125B B 150D225X0125B2 150D225X9125B Document Number: For technical questions, contact: tantalum@vishay.com Revision: 11-May-07 8
9 150D Solid-Electrolyte TANTALEX Capacitors STANDARD REEL PACKAGING SPECIFICATIONS - MEETS EIA STANDARD RS-296 in inches [millimeters] 13.0 [330.2] STANDARD REEL "A" Tape Spacing to 3.07 [28.6 to 78.0] I.D. REEL HUB B A COMPONENT SPACING to [34.9 to 92.1] [0.79] MAX. OFF CENTER (1.a) CASE CODE A B R S ± DIA. [15.88 ± 1.575] THRU HOLE LABEL (4.a) TYPE 150D UNITS WITH INSULATING SLEEVE LEAD SIZE STANDARD REEL PACKAGING INFORMATION 1. Component Leads: a. Component leads shall not be bent beyond 0.047" [1.19 mm] maximum from their nominal position when measured from the leading edge of the component lead at the inside tape edge and at the lead egress from the component. b. The 'C' dimension shall be governed by the overall length of the reel packaged component. The distance between flanges shall be 0.125" to 0.250" [3.18 mm to 6.35 mm] greater than the overall component length. 2. Orientation: All polarized components must be oriented to one direction. The cathode lead tape shall be a color and the anode lead tape shall be white. 3. Reeling: a. Components on any reel shall not represent more than two date codes when date code identification is required. b. Component leads shall be positioned between pairs of 0.250" [6.35 mm] tape. c. The disposable reels have hubs and corrugated fiber board flanges and core or equivalent. d. A minimum of 12.0" [304.8 mm] leader of tape shall be provided before the first and after the last component on the reel. e. 50 or 60 lb. Kraft paper must be wound between layer of components as far as necessary for component protection. Width of paper to be 0.062" to 0.250" [1.57 mm to 6.35 mm] less than the 'C' dimension of the reel. Solid-Electrolyte TANTALEX Capacitors Hermetically- Sealed, Axial-Lead "A" [19.05] SECTION "A" - "A" COMPONENT SPACING BOTH SIDES (3.f) [0.79] (3.f) TAPE SPACING D L AWG NO. NOM. DIA. A B ± ± ± ± [3.43 ± 0.41] [7.26 ± 0.79] [0.51] [5.08 ± 0.38] [63.5 ± 1.57] ± ± ± ± [4.70 ± 0.41] [12.04 ± 0.79] [0.51] [5.08 ± 0.38] [63.5 ± 1.57] ± ± ± ± [7.34 ± 0.41] [17.42 ± 0.79] [0.64] [10.16 ± 0.38] [73.03 ± 1.57] ± ± ± ± [8.92 ± 0.41] [19.96 ± 0.79] [0.64] [10.16 ± 0.38] [73.03 ± 1.57] [3.18] MAX [6.35] (3.b) UNITS PER REEL f. A row of components must be centered between tapes ± 0.047" [1.19 mm]. In addition, individual components may deviate from center of component row ± 0.031" [0.79 mm]. g. Staples shall not be used for splicing. Not more than 4 layers of tape shall be used in any splice area and no tape shall be offset from another by more than 0.031" [0.79 mm] non-cumulative. Tape splices shall overlap at least 6.0" [152.4 mm] for butt joints and at least 3.0" [76.2 mm] for lap joints and shall not be weaker than unspliced tape. Universal splicing clips may also be used. h. Quantity per reel shall be controlled so that tape components and cover shall not extend beyond the smallest dimension of the flange (either across flats or diameter). Once the quantity per reel for each part number has been established, future orders for that part number shall be packaged in that quantity. When order or release quantity is less than the established quantity, a standard commercial pack is to be used. i. A maximum of 0.25 % of the components per reel quantity may be missing without consecutive missing components. j. Adequate protection must be provided to prevent physical damage to both reel and components during shipment and storage. 4. Marking: Minimum reel and carton marking shall consist of the following: Customer Part Number, Purchase Order No., Quantity, Package Date, Manufacturer's Name, Electrical Value, Date Code, Part Number and Country of Origin. For technical questions, contact: tantalum@vishay.com Document Number: Revision: 11-May-07
10 Notice Legal Disclaimer Notice Vishay Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: Revision: 08-Apr-05 1
Aluminum Capacitors C, Tubular, Radial Lead
Aluminum Capacitors + 105 C, Tubular, Radial Lead FEATURES Wide temperature range Radial design in two and three lead configuration Ideal SMPS output filter PERFORMANCE CHARACTERISTICS Operating Temperature:
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Διαβάστε περισσότεραSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Διαβάστε περισσότερα1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Διαβάστε περισσότεραMetal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Διαβάστε περισσότεραSummary of Specifications
Snap Mount Large High CV High Ripple 85 C Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life for the series is 2,000 hours
Διαβάστε περισσότεραApplications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
Διαβάστε περισσότεραSmaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
Διαβάστε περισσότερα+85 C General Purpose Miniature Aluminum Capacitors
+85 C General Purpose Miniature Aluminum Capacitors Features- Increased CV Efficiency Non Polar Design Available (Special Order) General Specifications- Operating Temperature: -40 to +85 C Voltage Range:
Διαβάστε περισσότεραCASE DIMENSIONS: 1.27±0.13 (0.050±0.005) A 2.54 (0.100) 1.27 (0.050) 1.27 (0.050) 1.27±0.13 (0.050±0.005) B 3.81 (0.150) 1.27 (0.050) 1.27 (0.
MARKING (White marking on black body) Polarity Stripe (+) Code Rated Voltage The T4Z HRC4000 Medical Grade series is designed for use in non-critical medical applications. The T4Z product line is based
Διαβάστε περισσότεραThin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Διαβάστε περισσότεραLS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
Διαβάστε περισσότερα± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:
TS-UP Series 85 C, 3000 hours Compact size for general purpose and industrial applications 2 and 3 pin versions available 20mm lengths for low profile applications RoHS Compliant Rated Working Voltage:
Διαβάστε περισσότερα+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
Διαβάστε περισσότεραSurface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
Διαβάστε περισσότεραAluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
Διαβάστε περισσότερα1.5KE SERIES Taiwan Semiconductor
1500W, 6.8V - 440V Transient Voltage Suppressor FEATURES - Excellent clamping capability - Low dynamic impedance - 1500W surge capability at 10 / 0 μs waveform - Fast response time: Typically less than
Διαβάστε περισσότεραOperating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
Διαβάστε περισσότεραAluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Διαβάστε περισσότεραMCRH Series High Temp. Electrolytic Capacitors
Features: General purpose. Wide CV value range. Safety vent construction products, ECRH series are guaranteed for 000 hours at C. High temperature radial leaded electrolytic. Supplied loose with straight
Διαβάστε περισσότεραLong 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction
TS-HA/HB Series 105 C, 3000 hours Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature:
Διαβάστε περισσότεραC4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Διαβάστε περισσότερα+85 C General Purpose Radial Lead Aluminum Electrolytic Capacitors
+85 C General Purpose Radial Lead Aluminum Electrolytic acitors Applications Filtering Coupling Bypass Features Standard case sizes RoHS compliant Multiple case sizes Lead free Operating Temperature Range
Διαβάστε περισσότεραPolymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
Διαβάστε περισσότεραInterference Suppression Capacitor
MOLDED BOX CONSTRUCTION, SUPPRESSION CAPACITOR, RADIAL LEAD FEATURES UL, CSA, VDE, CQC, CE, ENEC APPROVALS X2 SAFETY CAP CLASSIFICATION FOR USE IN ACROSS-THE-LINE APPLICATIONS METALLIZED POLYPROPYLENE
Διαβάστε περισσότεραCSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Διαβάστε περισσότεραCSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Διαβάστε περισσότεραLower Voltage Ceramic Disc Capacitors 2 kv DC to 7.5 kv DC
Lower Voltage eramic isc apacitors 2 kv to 7.5 kv 564R and 565R Series Vishay era-mite Fig. 1 max. LEA OFFSE 'LO' NOMINAL ~ HIKNESS - 0." EXEPION 1.250" min. (32 mm) inned opper Leads INSULAION RESISANE
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Διαβάστε περισσότεραNo Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Διαβάστε περισσότεραALUMINUM ELECTROLYTIC CAPACITORS LKG
Lug / Snap-in Terminal Type, For Audio Equipment Disigned for high grade audio equipment, giving priority to high fidelity sound quality. The variation expansion of the. TYPE-: The low profile high tone
Διαβάστε περισσότεραCurrent Sense Metal Strip Resistors (CSMS Series)
Features: Range: 1mΩ to 100mΩ Low TCR as low as 75PPM High power rating Custom Values available RoHS Compliant and Halogen Free Operating Temperature: -55 C to +170 C Part Number Structure CSMS 0805 -
Διαβάστε περισσότεραPackaging Chip Resistors
Packaging Chip esistors Chip esistor eel Nominal Dimensions Inches () Packaging: Chips Per EI Standard S-481 inches B C D E F G H J 1 0.16 ± 0.01 4.0 ± 0.1 0.08 ± 0.01 2.0 ± 0.1 0.16 ± 0.01 4.0 ± 0.1 0.06
Διαβάστε περισσότεραMetal Film Flame-Proof Resistors
Features -Low Noise -Low TCR from ±15~100PPM/ -High Precision from ±0.1%~1% -Complete Flameproof Construction UL-1412. -Coating meets UL94V-0 Applications -Telecommunication -Medical Equipment -Consumer
Διαβάστε περισσότεραCurrent Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Διαβάστε περισσότεραTHICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Διαβάστε περισσότεραNKT NTC Thermistor. Negative Temperature Coefficient Thermistor FEATURES
FEATURES Large, strong capacity of suppression of inrush current Big material (B value), small residual Small size, Long life, high reliability and fast response APPLICATIONS Switching -supply, switch,
Διαβάστε περισσότεραPrecision Metal Film Fixed Resistor Axial Leaded
Features EIA standard colour-coding Non-Flame type available Low noise and voltage coefficient Low temperature coefficient range Wide precision range in small package Too low or too high ohmic value can
Διαβάστε περισσότεραAT Surface Mount Package SOT-363 (SC-70) I I Y. Pin Connections B 1 C 1 E 1 E 2 C 2 B , 7:56 PM
AT-3263 Surface Mount Package SOT-363 (SC-7) I I Y Pin Connections B 1 C 1 E 1 E 2 C 2 B 2 Page 1 21.4., 7:6 PM Absolute Maximum Ratings [1] Absolute Thermal Resistance [2] : Symbol Parameter Units Maximum
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Power ratio(%) MFR Series Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications
Διαβάστε περισσότεραCarbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
Διαβάστε περισσότεραNTC Thermistor:TSM type
Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended
Διαβάστε περισσότεραLR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Διαβάστε περισσότεραMetal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Construction Applications Telecommunication
Διαβάστε περισσότεραMINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. Characteristics. Leakage Current(MAX) I=Leakage Current(µA) C=Nominal Capacitance(µF) V=Rated Voltage(V)
SERIES 5 C Long Life. Low impedance. (Rated Voltage 6.3~V.DC) FEATURES Load Life : 5 C 4~hours. Low impedance at khz with selected materials. SPECIFICATIONS Items Operating Temperature Range Rated Voltage
Διαβάστε περισσότεραType SLPX 85 C Snap-In Aluminum Electrolytic Best Value 85 C Snap-In Type
Type SLPX is the best value package snap-in series for 85 ºC, 3000 h operation. This series is the most cost-effective choice for DC fltering and power supply applications where long life and high ripple
Διαβάστε περισσότεραRJJ Miniature Aluminum Electrolytic Capacitors RJJ. Series RJJ High-Frequency, Low Impedance, Standard Type. Radial Type
352 Elna Corrections 80-95 /6/98 :55 AM Page Miniature Aluminum Electrolytic Capacitors Series High-Frequency, Low Impedance, Standard Type For high reliability applications, Environmentally safe. High-frequency,
Διαβάστε περισσότεραB37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Διαβάστε περισσότερα+85 C Screw Terminal Aluminum Electrolytic Capacitors. For filtering applications. Capacitance change Dissipation factor Leakage current
For filtering applications FEATURES High ripple current High reiability range: 270µF to 680,000µF Voltage range: 6.3 to 450 SPECIFICATIONS Tolerance ±20% at 120 Hz, 25 C Operating Temperature Range Dissipation
Διαβάστε περισσότεραMultilayer Chip Capacitors C0G/NP0/CH
Multilayer Chip Capacitors C0G/NP0/CH Features Good thermal stability High insulation resistance Low dissipation factor Low inductance Applications Resonant circuits Filter circuits Timing elements Coupling
Διαβάστε περισσότεραPPA Metallized polypropylene film capacitor MKP - Snubber/pulse - High current
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and high pulse applications
Διαβάστε περισσότεραData sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Διαβάστε περισσότεραSMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)
Marking Outline: Low DCR, high rated current. Magnetic shielded structure Lead free product, RoHS compliant. RoHS Carrier tape packing, suitable for SMT process. SMT Widely used in buck converter, laptop,
Διαβάστε περισσότεραSMD Transient Voltage Suppressors
SMD Transient Suppressors Feature Full range from 0 to 22 series. form 4 to 60V RMS ; 5.5 to 85Vdc High surge current ability Bidirectional clamping, high energy Fast response time
Διαβάστε περισσότεραFP series Anti-Bend (Soft termination) capacitor series
FP series Anti-Bend (Soft termination) capacitor series Features Applications» High performance to withstanding 5mm of substrate» For general digital circuit bending test guarantee» For power supply bypass
Διαβάστε περισσότεραAerovox Corp. Type H High Voltage AC & DC Capacitors. Film Capacitors for Power Electronics Applications. RoHS Compliant. Highlights.
H Aerovox Corp. Film Capacitors for Power Electronics Applications Specifications Outline Drawing Capacitance Range: AC Voltage Range: DC Voltage Range: Temperature Range: Capacitance Tolerance: Dissipation
Διαβάστε περισσότεραAPPLICATIONS General medium power DC/DC convertors. CASE DIMENSIONS: millimeters (inches)
Low FEATURES Low series of robust Mn0 2 solid electrolyte capacitors CV range: 0.15-1500μF / 2.5-50V 14 case sizes available Power supply applications APPLICATIONS General medium power DC/DC convertors
Διαβάστε περισσότεραCountry of Origin. Japan Malaysia China
Radial Lead Type Series: FC Type :A n Features Endurance : 5 C 00 h to 5000 h Low impedance Country of Origin Japan Malaysia China n Specifications Category temp. range Rated W.V. Range Nominal Cap. Range
Διαβάστε περισσότεραThick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MW) THICK FILM ON ALUMINA SUSTRATE,
Διαβάστε περισσότεραType 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
Διαβάστε περισσότεραType CGS High-Cap Screw Terminal Aluminum Electrolytic Capacitor
High CV, Screw Terminal Capacitors Specifications Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature: Ripple Current Multipliers: Type CGS screw terminal, aluminum electrolytic
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
Διαβάστε περισσότερα4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
Διαβάστε περισσότεραHIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
Διαβάστε περισσότεραCeramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Διαβάστε περισσότεραSpecification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)
High CV-value Long Life > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life Optimized designs available on request RoHS Compliant application Basic design Smoothing, energy storage,
Διαβάστε περισσότεραRF series Ultra High Q & Low ESR capacitor series
RF series Ultra High Q & Low ESR capacitor series FAITHFUL LINK Features Application» High Q and low ESR performance at high frequency» Telecommunication products & equipments:» Ultra low capacitance to
Διαβάστε περισσότεραMetal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
Διαβάστε περισσότεραRC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
Διαβάστε περισσότεραItem Performance Test condition (IEC ) Operating temperature 55ºC + 105ºC. Rated temperature + 105ºC. Range 3.3 μ F 1,000 μ F 120Hz
Low ESR / RoHS Compliant PS/L series is the standard product of NeoCapacitor TM. PS/L series can provide space-saving solution and low ESR. Performance Characteristics Item Performance Test condition (IEC
Διαβάστε περισσότεραFixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Διαβάστε περισσότεραMultilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Διαβάστε περισσότεραSERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES) (8) 95-8365 venkel.com Features: RoHS Compliant and Halogen Free Good Q values High SRF range: 1nH to 47uH Tolerance: ±.2nH, ±.3nH, ±2%, ±5%, ±1% High
Διαβάστε περισσότεραNPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
Διαβάστε περισσότεραXKT. Metal Oxide Varistor FEATURES
FEATURES Operating Temperature Range: -40 ~+105 Body Diameters Range From 5D to 20D Wide Operating from 18V to 1800V Full compliance with RoSH and REH DIMENSION L:16mm min SIZE D MAX H MAX d+-0.05 E c
Διαβάστε περισσότεραFixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Διαβάστε περισσότεραMULTILAYER CHIP VARISTOR JMV S & E Series: (SMD Surge Protection)
INTRODUCTION Metal Oxide based chip varistors (JMVs) are used for transient suppression. JMVs have non-linear - behavior, which is similar to that of Zener Diode. Each grain in JMV exhibits small p-n junction
Διαβάστε περισσότεραNMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
Διαβάστε περισσότεραRoHS ASPI. Test Condition. DCR IDC Marking
-3D, 4D, 5D, 6D FEATURES: Magnetic shielded for low radiation Low profile, compact size Large Terminal surface for good PCB bonding Low DCR, High Energy storage, suitable for large currents Ideal for a
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
Διαβάστε περισσότεραNTC Thermistor:TTC3 Series
Features. RoHS compliant 2. Halogen-Free(HF) series are available 3. Body size: Ф3mm 4. Radial lead resin coated 5. Operating temperature range: -40 ~+25 6. Wide resistance range 7. Cost effective 8. Agency
Διαβάστε περισσότεραCurrent Sensing Chip Resistor
Features -3 atts power rating in 1 att size, 1225 package -Low CR of ±100 PPM/ C -Resistance values from 1m to 1 ohm -High purity alumina substrate for high power dissipation -Long side terminations with
Διαβάστε περισσότεραVAR Series Zinc Oxide Varistor
FEATURES Round Zinc Oxide, leaded Coating: epoxy resin, flame-retardant material Operating Temperature Range: -40 ~+105 Wide operating voltage Approvals: CQ C, UL, VDE RoHS 201165EU; REACH Compliant High
Διαβάστε περισσότεραDATA SHEET Surface mount NTC thermistors. BCcomponents
DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped
Διαβάστε περισσότεραConfigurations: Dimension (mm) B (max) A (max) 0.20 IWCCG1005. Inductance Range IWCCG ~ IWCCG ~ 1000 IWCCG
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Διαβάστε περισσότεραMAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
Διαβάστε περισσότεραYJM-L Series Chip Varistor
Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
Διαβάστε περισσότεραNTC thermistors for temperature measurement
NTC thermistors for temperature measurement SMD NTC thermistors with nickel barrier termination, case size 0603 Series/Type: Date: June 2008 EPCOS AG 2008. Reproduction, publication and dissemination of
Διαβάστε περισσότεραShape Square. Tolerance of Varistor Voltage For Varistor voltage<68, Special For Varistor voltage 68, 10% Lead Wire Type Straight Cut Lead
Leaded Varistor for urge uppression VP eries Operating Temp. : -40 ~ +85 FEATURE Fast response Excellent clamping ratio, high peak current and pulse energy withstanding characteristics, providing strong
Διαβάστε περισσότεραThin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) RoHS Compliant includes all homogeneous
Διαβάστε περισσότεραThin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) Type EI Size Power Rating at 70
Διαβάστε περισσότεραIWCSeries FEATURES APPLICATION ORDERING CODE TRIGON COMPONENTS. Configurations: Dimension (mm) IWC C G 1608 K 22N T (1) (2) (3) (4) (5) (6) (7)
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Διαβάστε περισσότερα601D C Tubular Axial Lead Aluminum Capacitors. Features- Wide Temperature Range Military Version Mil-PRF-39018/03 Long Life Low ESR
+105 C Tubular Axial Lead Aluminum Capacitors 601D Features- Wide Temperature Range Military Version Mil-PRF-39018/03 Long Life Low ESR General Specifications- Operating Temperature: -55 to +105 C Voltage
Διαβάστε περισσότεραHigh Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
Διαβάστε περισσότερα[1] P Q. Fig. 3.1
1 (a) Define resistance....... [1] (b) The smallest conductor within a computer processing chip can be represented as a rectangular block that is one atom high, four atoms wide and twenty atoms long. One
Διαβάστε περισσότερα