UC Wireless System CONTENTS
|
|
|
- Μιλτιάδης Λύκος
- 7 χρόνια πριν
- Προβολές:
Transcript
1 UC Wireless System USER GUIDE SUPPLEMENT MC ( MHz) CONTENTS SPECIFICATIONS Furnished Accessories Optional Accessories Replacement Parts FREQUENCY SELECTION GUIDE Compatibility Groups , Shure Incorporated 27B8663 (BK) Printed in U.S.A.
2 SPECIFICATIONS RF Carrier Frequency Range MHz Working Range m (500 ft), minimum, under typical conditions; m (1600 ft ) line of sight NOTE: Actual working range depends on RF signal absorption, reflection and interference. Audio Frequency Response 45 to 15,000 Hz, ±2 db. NOTE: Overall system frequency response depends on the microphone element. Gain Adjustment Range UC1: 6 to 34 db UC2: 6 to 26 db Modulation ±27 khz deviation compressor-expander system with pre-and de-emphasis RF Power Output UC1, UC2: 50 mw, maximum Dynamic Range >85 db, A-weighted Receiver Audio Output Level (Maximum) +5 dbu typical, unbalanced output +14 dbu typical, balanced output RF Sensitivity UC4: 108 dbm at 12 db SINAD Image Rejection 90 db typical Spurious Rejection 70 db typical Ultimate Quieting (ref. 45 khz deviation) >100 db, A-weighted Audio Polarity Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 with respect to pin 3 of low impedance output and the tip of the high impedance 1 / 4 -inch output System Distortion (ref. ±45 khz deviation, 1 khz modulation) 0.4% Total Harmonic Distortion typical Power Requirements UC1, UC2: 9V alkaline battery (Duracell MN1604 recommended); Nicad optional UC4: 15 Vdc, 600 ma 50/60 Hz Power Consumption: 600 ma x 15 V, maximum Transmitter Battery Life (Typical) 8 hours (with Duracell MN1604 9V alkaline battery) Operating Temperature Range -7 to 49 C (20 to 120 F) NOTE: Battery characteristics may limit this range. Overall Dimensions UC1: mm L x mm W x mm D (3 29/32 L x 2 1/2 W x 29/32 in. D) UC2/58: mm L x 50.8 mm Dia. (9 1/2 L x 2 in. Dia.) UC2/BETA 58: mm L x mm Dia. (9 1/2 L x 2 in. Dia.) UC2/87: mm x mm Dia. (8 1/2 L x 2 in. Dia.) UC2/BETA 87: mm L x 50.8 mm Dia. (8 1/2 L x 2 in. Dia.) UC4: mm H x mm W x mm D (1 3/4 L x 7.77 W x 8.44 in. D) 2
3 Net Weight UC1: g (2.59 oz.) without battery UC2/58, U2/BETA 58: g (11 oz.) without battery UC2/87, U2/BETA 87: g (7 oz.) without battery UC4: 1.22 kg (2 lbs, 11 oz.) Certification UC1, UC2: BAPT Type Approved to FTZ 17TR 2019 and BAPT 122 R1; EMC Approved to ETS UC4: VDE Certified to EN BAPT Type Approved to FTZ 17TR 2019 and BAPT 122 R1; EMC Approved to ETS Meets Low Voltage Directive. UC Type Approved and EMC Approved systems are eligible to carry the CE marking. UC1 Transmitter Input (Figure 1) Connector: 4-Pin Female Miniature ConnectorTA4F or LEMO connector (optional) Input Configuration: Unbalanced, active Actual Impedance: 18 kω with lavalier microphone 1 MΩ with instrument cable Maximum Input Level: 9 Vp p (10 dbv) for 1% THD at minimum gain setting using 1 khz signal. 4-Pin Female Miniature Connector TA4F Pin Assignments: LEMO Connector Pin Assignments: Voltage for Remote Power: Pin 1: Tied to Ground Pin 2: Tied to +5 V Pin 3: Tied to Audio Pin 4: Tied thru 20kΩ Resistor to Ground. (On instrument adapter cable, Pin 4 floats) Pin 1: Tied to Pin 3 and 10 kω to Ground Pin 2: +5V Pin 3: Tied to Pin 1 Pin 4: Tied to Shield (Ground for Positive Bias) +5 V supplied to microphone cartridge UC1 MICROPHONE ELEMENT UC1 MIC JACK BOARD 500 Ω 27 pf 20K Ω 500 Ω 27 pf +5 V AUDIO GROUND NOTE: LAVALIER MIC TIES PINS 3 AND 4 TOGETHER; GUITAR CABLE DOES NOT. UC1L (LEMO 4 PIN) MIC JACK BOARD Ω AUDIO 27 pf 499 Ω BIAS 27 pf 10K Ω SHIELD FIGURE 1 3
4 UC1 Transmitter Output Antenna: Actual Impedance: Nominal Output Level: Maximum Output Level: UC2 Transmitter Input Input Configuration: Actual Impedance: Maximum Input Level: UC2 Transmitter Output Antenna: Actual Impedance: Nominal Output Level: Maximum Output Level: Flexible 1/4 wave wire 50 Ω +17 dbm +17 dbm Unbalanced, active 25 kω 9 Vp p (10 dbv) for 1% THD at minimum gain setting using 1 khz signal. Internal dipole 50 Ω +17 dbm +17 dbm UC4 Receiver Input Connector: Antenna Power Input Connector Type: BNC dc style Actual Impedance: 50 Ω Nominal Input Level: 95 to 30 dbm 15 Vdc Maximum Input Level: Pin Assignments: UC4 Receiver Output +6 dbm ( 20 dbm recommended) Shell = Ground Center = Signal 4 17 Vdc Center pin positive Connector: High Z Audio Low Z Audio Output Configuration: Unbalanced Balanced Actual Impedance: 1 kω 44Ω Nominal Input Level: Output Level: 5 dbu maximum 14 dbu maximum Pin Assignments: Tip = Hot Ring/ Sleeve = Gnd 1 = Ground 2 = Hot 3 = Hot FURNISHED ACCESSORIES Microphone Stand Adapter (UC2) WA370A Zipper Bag (UC1) A13 Zipper Bag (UC2) A14 Screwdriver A498 1/4 Wave Antenna UA400
5 OPTIONAL ACCESSORIES Instrument Adapter Cable (UC1) WA302 4 Pin Female Miniature Connector TA4F (UC1) WA330 In-Line Audio Switch (UC1) WA Meter (6 ft) Receiver-Mixer Cable ( 1 / 4 phone to XLR) WA Meter (2 ft.) Antenna Extension Cable UA Meter (25 ft) Antenna Extension Cable UA (50 ft) Meter Antenna Extension Cable UA850 In Line Active Remote Antenna Kit ( MHz) (If using the UA845 MC Antenna/Power Distribution System) UA830D Antenna/Power Distribution System, 230 Vac UA845-MC Directional Antenna for UC4 Receiver (If using the UA845 MC Antenna/Power Distribution System) UA870MC Remote Mute Switch for UC UA101 Passive Antenna Splitter/Combiner UA220 1/2 Wave Omnidirectional Antenna for UC4 Receiver UA820A Remote Mount Antenna Kit UA500 Front Mount Antenna Kit UA600 REPLACEMENT PARTS Hardware Kit (screwdriver, mounting feet, cable clamps) VX1371 Bulkhead Adapters for Front Mounting Antennas A Vdc Power Cord (230 VAC) PS40E SM58 Cartridge with Grille (UC2/58) R158 BETA 58A Cartridge with Grille (UC2/BETA 58) R179 SM87 Cartridge with Grille (UC2/87) R165 BETA 87A Cartridge with Grille (UC2/BETA 87A) R166 BETA 87C Cartridge with Grille (UC2/BETA 87C) RPW100 Matte Silver Grille (UC2/58) RK143G Matte Silver Grille (UC2/BETA 58) RK265G Matte Silver Grille (UC2/BETA 87A) RK313G Black Grille (UC2/87C) RK214G Black Grille (UC2/BETA 58) RK323G Black Grille (UC2/BETA 87A) RK324G Belt Clip (UC1) A8013 Mounting Brackets, Long A8458 Mounting Brackets, Short A8454 Mounting Brackets, Link A8138 UC4 Logic Connector (Phoenix) A8580 5
6 FREQUENCY SELECTION GUIDE The Shure UC Wireless System is designed for maximum flexibility and versatility in a variety of applications. Up to 11 Shure UHF Wireless Systems can be operated simultaneously in a single installation using the frequency compatibility groups. Please contact Shure Incorporated if you need additional information or assistance in frequency selection and setup. Compatible Frequency List The following table lists the frequencies in each of the ten compatibility groups. C H A N N E L 0 GROUP GRP. 0 GRP. 1 GRP. 2 GRP. 3 GRP. 4 GRP. 5 GRP. 6 GRP. 7 GRP. 8 GRP E A B C D E F 6
7
8 SHURE Incorporated Web Address: W. Touhy Avenue, Niles, IL , U.S.A. Phone: Fax: In Europe, Phone: Fax: In Asia, Phone: Fax: Elsewhere, Phone: Fax:
UC Wireless System CONTENTS. JB ( MHz)
UC Wireless System USER GUIDE SUPPLEMENT JA (797 806 MHz) JB (806 810 MHz) CONTENTS SPECIFICATIONS................................................ 2 Furnished Accessories.........................................
CONTENTS. USER GUIDE SUPPLEMENT J4 ( MHz) UHF WIRELESS SYSTEM
USER GUIDE SUPPLEMENT J4 (554-584 MHz) UHF WIRELESS SYSTEM CONTENTS SPECIFICATIONS................................................ 2 FURNISHED ACCESSORIES...................................... 5 OPTIONAL
ULX Wireless System USER GUIDE SUPPLEMENT RENSEIGNEMENT SUPPLÉMENTAIRES INFORMACION ADICIONAL. M1 ( MHz)
ULX Wireless System USER GUIDE SUPPLEMENT RENSEIGNEMENT SUPPLÉMENTAIRES INFORMACION ADICIONAL M1 (662 698 MHz) 2003, Shure Incorporated 27B8733A (Rev. 4) Printed in U.S.A. SPECIFICATIONS ULX1 Transmitter
Technical Specifications
FLX-8X8A Chassis Technical Specifications Modular Input Cards... FLX-BI4, FLX-DI4, FLX-HI4, FLX-RI4 Analog Audio... Balanced or Unbalanced Stereo Audio (20 Hz to 20 khz) Supported Outputs Modular Output
Studio Transmitter Link
UHF STL TRANSMITTER BPT-V/UHF TRANSMITTER SPECIFICATIONS TYPE solid state direct FM frequency synthesised crystal referenced thermal compensated FREQUENCY STABILITY better than 4 ppm0 -------------------------------------------+40
Electrical Specifications at T AMB =25 C DC VOLTS (V) MAXIMUM POWER (dbm) DYNAMIC RANGE IP3 (dbm) (db) Output (1 db Comp.) at 2 f U. Typ.
Surface Mount Monolithic Amplifiers High Directivity, 50Ω, 0.5 to 5.9 GHz Features 3V & 5V operation micro-miniature size.1"x.1" no external biasing circuit required internal DC blocking at RF input &
Prepolarized Microphones-Free Field
Prepolarized Microphones-Free Field MP0 / MP3 / MP / MP / MP / MP / MP8 MP0 MP3 MP MP MP MP MP8 Standards (IEC7) I I I.3 ~ 0k 3 ~ 0k 0 ~.k 0 ~.k 0 ~ 70k 0 ~ k 0 ~ k Open-circuit Sensitivity (mv/pa) (±db)
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
65W PWM Output LED Driver. IDLV-65 series. File Name:IDLV-65-SPEC
~ A File Name:IDLV65SPEC 07050 SPECIFICATION MODEL OUTPUT OTHERS NOTE DC VOLTAGE RATED CURRENT RATED POWER DIMMING RANGE VOLTAGE TOLERANCE PWM FREQUENCY (Typ.) SETUP TIME Note. AUXILIARY DC OUTPUT Note.
SMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 10 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
SPBW06 & DPBW06 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (TYP.) CAPACITOR LOAD (MAX.) SPBW06F-03 310mA 3.3V 0 ~ 1500mA 81% 4700μF SPBW06F-05
RT-178 / ARC-27 All schematics
RT / ARC All schematics J I K P0 L A B M C P N D O E H G F P0 RT /ARC F L P0 A C D G J M P S B E K R H N SQ OFF GUARD REC MOD I k I B E i DRVR I g FINAL I g I ant SQ OFF MAIN REC SENS PHONE METER MIC SENS
65W PWM Output LED Driver. IDPV-65 series. File Name:IDPV-65-SPEC
IDPV65 series ~ A File Name:IDPV65SPEC 07060 IDPV65 series SPECIFICATION MODEL OUTPUT OTHERS NOTE DC VOLTAGE RATED CURRENT RATED POWER DIMMING RANGE VOLTAGE TOLERANCE PWM FREQUENCY (Typ.) SETUP TIME Note.
ISM 868 MHz Ceramic Antenna Ground cleared under antenna, clearance area mm x 8.25 mm. Pulse Part Number: W3013
W0 Datasheet version.. Ceramic Antenna. (0/08). Ceramic Antenna Ground cleared under antenna, clearance area 0.80 mm x 8.5 mm. Pulse Part Number: W0 Features - Omni directional radiation - Low profile
Aluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
RSDW08 & RDDW08 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (Typ.) CAPACITOR LOAD (MAX.) RSDW08F-03 344mA 3.3V 2000mA 80% 2000μF RSDW08F-05
Aluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
IDPV-45 series. 45W PWM Output LED Driver. File Name:IDPV-45-SPEC S&E
IDPV5 series S&E ~ A File Name:IDPV5SPEC 0805 IDPV5 series SPECIFICATION MODEL OUTPUT INPUT OTHERS NOTE DC VOLTAGE RATED CURRENT RATED POWER DIMMING RANGE VOLTAGE TOLERANCE PWM FREQUENCY (Typ.) SETUP TIME
MAX4147ESD PART 14 SO TOP VIEW. Maxim Integrated Products 1 MAX4147 EVALUATION KIT AVAILABLE ; Rev 1; 11/96 V CC V EE OUT+ IN+ R t SENSE IN-
-; Rev ; / EVALUATION KIT AVAILABLE µ µ PART ESD TEMP. RANGE - C to +5 C PPACKAGE SO TOP VIEW V EE V CC SENSE+ SENSE- R t R t R t R t MAX SENSE OUT SENSE+ SENSE- N.C. SHDN N.C. 3 5 R f R G R f 3 VDSL TRANSFORMER
1.575 GHz GPS Ceramic Chip Antenna Ground cleared under antenna, clearance area 4.00 x 4.25 mm / 6.25 mm. Pulse Part Number: W3011 / W3011A
W0 Datasheet version. ceramic antenna. (09/08).575 GHz Ceramic Chip Antenna Ground cleared under antenna, clearance area x 4.5 mm / 6.5 mm. Pulse Part Number: W0 / W0A Features - Omni directional radiation
ISM 900 MHz Ceramic Antenna Ground cleared under antenna, clearance area mm x 8.25 mm. Pulse Part Number: W3012
W0 Datasheet version.. Ceramic Antenna. (0/08). Ceramic Antenna Ground cleared under antenna, clearance area 0.80 mm x 8.5 mm. Pulse Part Number: W0 Features - Omni directional radiation - Low profile
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
38BXCS STANDARD RACK MODEL. DCS Input/Output Relay Card Series MODEL & SUFFIX CODE SELECTION 38BXCS INSTALLATION ORDERING INFORMATION RELATED PRODUCTS
DCS Input/Output Relay Card Series STANDARD RACK MODEL 38BXCS MODEL & SUFFIX CODE SELECTION 38BXCS MODEL CONNECTOR Y1 :Yokogawa KS2 cable use Y2 :Yokogawa KS9 cable use Y6 :Yokogawa FA-M3/F3XD32-3N use
TRC ELECTRONICS, INC LED Driver Constant Voltage 45W MEAN WELL IDLV-45 Series
LED Driver Constant Voltage 5W MEAN WELL IDLV5 Series ~ A File Name:IDLV5SPEC 0707 TRC ELECTRONICS, INC..888.6.95 LED Driver Constant Voltage 5W MEAN WELL IDLV5 Series TRC ELECTRONICS, INC. SPECIFICATION
BMA SERIES Subminiature Blind Mate Connectors
SERIES Subminiature Blind Mate Connectors FEATURES The blindmate connectors are designed for blindmate applications up to Ghz. They have a slide-on, non-locking interface which ensures frequent matings
Type 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
LR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
LR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
NEC Silicon RFIC Amplifiers Low Power, Wideband & SiGe/SiGeC
NEC Silicon RFIC Amplifiers Low Power, Wideband & SiGe/SiGeC Low Power Amplifiers ELECTRICAL CHARACTERISTICS (TA = 25 C) Range VCC ICC NF Gain RLIN RLOUT PdB ISOL @ 3dB (V) (ma) (dbm) Part down Package
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Series AM2DZ 2 Watt DC-DC Converter
s Single output FEATURES: RoHS Compliant Operating temperature -40 o C to + 85 o C Low ripple and noise Pin compatible with multiple manufacturers High efficiency up to 82% Input / Output Isolation 1000,3000,
Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction
TS-HA/HB Series 105 C, 3000 hours Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature:
AT Surface Mount Package SOT-363 (SC-70) I I Y. Pin Connections B 1 C 1 E 1 E 2 C 2 B , 7:56 PM
AT-3263 Surface Mount Package SOT-363 (SC-7) I I Y Pin Connections B 1 C 1 E 1 E 2 C 2 B 2 Page 1 21.4., 7:6 PM Absolute Maximum Ratings [1] Absolute Thermal Resistance [2] : Symbol Parameter Units Maximum
LR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:
![± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:](/thumbs/85/91419422.jpg "± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:")
TS-UP Series 85 C, 3000 hours Compact size for general purpose and industrial applications 2 and 3 pin versions available 20mm lengths for low profile applications RoHS Compliant Rated Working Voltage:
Περιληπτικό Εγχειρίδιο CABLE TESTER CT100. Professional 6-in-1 Cable Tester
Περιληπτικό Εγχειρίδιο CABLE TESTER CT100 Professional 6-in-1 Cable Tester 2 Περιεχομενα Σημαντικ οδηγ ασφαλε...3 Νομική αποκήρυξη...5 1. Εισαγωγη...6 2. Προγραμμα Λειτουργιας Ελεγχου Καλωδιων...6 2.1
Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
IDPV-25 series. 25W PWM Output LED Driver. File Name:IDPV-25-SPEC S&E
5W PWM Output LED Driver IDPV5 series S&E ~ A File Name:IDPV5SPEC 0805 5W PWM Output LED Driver IDPV5 series SPECIFICATION MODEL IDPV5 IDPV5 4 IDPV5 6 IDPV5 48 IDPV5 60 DC VOLTAGE V 4V 6V 48V 60V CONSTANT
MMCX SERIES Microminiature Coaxial Connectors
SERIES Microminiature Coaxial Connectors FEATURES connectors are smaller than MCX connectors and are used from DC up to 6 GHz in applications where a tiny size is crucial. INTERFACE MATING DIMENSIONS PLUG:
60W AC-DC High Reliability Slim Wall-mounted Adaptor. SGA60E series. File Name:SGA60E-SPEC
AC-DC High Reliability Slim Wall-mounted Adaptor SGA60E series Ⅵ Ⅴ Ⅱ Ⅱ { ψ. ψ File Name:SGA60E-SPEC 2015-09-15 AC-DC High Reliability Slim Wall-mounted Adaptor SGA60E series SPECIFICATION ORDER NO. SGA60E05-P1J
DC-DC Constant Current Step-Down LED driver LDD-300L LDD-350L LDD-500L LDD-600L LDD-700L CURRENT RANGE
SPECIFICATION ORDER NO. LDD-00L LDD-0L LDD-00L LDD-00L LDD-700L CURRENT RANGE 00mA 0mA 00mA VOLTAGE RANGE Note. ~ VDC for LDD-00~700L/LW ; ~ 8VDC for LDD-00~700LS CURRENT ACCURACY (Typ.) ±% at VDC input
YAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.
YAGEO CORPORATION SMD INDUCTOR / BEADS CLH Series Multilayer Chip Inductors High Frequency Lead-free / For High Frequency Applications APPLICATIONS RF Resonance and Impedance Matching Circuit RF and Wireless
Characterization Report
Characterization Report RF Coaxial Cable Assemblies Raw Cable Type: Temp-Flex 047-2801 RF047-11SP9-11SP9-0305 Test Date: 10 Dec. 2014 RF047-11RP9-11RP9-0305 Test Date: 13 Oct. 2014 RF047-01SP1-01SP1-0305
C4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
HORIZON QUANTUM. Logging
HORIZON QUANTUM High Capacity Packet Microwave System FEATURES NETWORK MANAGEMENT (NMS) Capacity w/accelerator Variable from 10 to 2000 Mbps full duplex CIR Management Access In or out of band 2x capacity
3 V, 900 MHz LOW NOISE SI MMIC AMPLIFIER
V, 9 MHz LOW NOISE SI MMIC AMPLIFIER UPC78T FEATURES.8 db NOISE FIGURE LOW VOLTAGE - LOW CURRENT: ma at V LOW POWER CONSUMPTION: 8 mw TYP SUPER SMALL PACKAGE TAPE AND REEL PACKAGING OPTION AVAILABLE DESCRIPTION
Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
High Performance Voltage Controlled Amplifiers Typical and Guaranteed Specifications 50 Ω System
High Performance Voltage Controlled Amplifiers Typical and Guaranteed Specifications 50 Ω System Typical and guaranteed specifications vary versus frequency; see detailed data sheets for specification
Τιμοκατάλογος λιανικής
Τιμοκατάλογος λιανικής 2013 Γ. Σεφέρη 28 - Κωνσταντινοπολίτικα 54 352 - Τηλ & Fax: 2310-322155 - www.apopsissound.gr T 1 Περιγραφή Τιμή Headphone design: Semi-open Headphone impedance: 600 ohms Frequency
Summary of Specifications
Snap Mount Large High CV High Ripple 85 C Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life for the series is 2,000 hours
Monolithic Crystal Filters (M.C.F.)
Monolithic Crystal Filters (M.C.F.) MCF (MONOLITHIC CRYSTAL FILTER) features high quality quartz resonators such as sharp cutoff characteristics, low loss, good inter-modulation and high stability over
DC-DC Constant Current Step-Down LED driver LDD-300L LDD-350L LDD-500L LDD-600L LDD-700L CURRENT RANGE
SPECIFICATION ORDER NO. LDD-00L LDD-0L LDD-00L LDD-00L LDD-700L CURRENT RANGE 00mA 0mA 00mA 00mA VOLTAGE RANGE Note. ~ VDC for LDD-00~700L/LW ; ~ 8VDC for LDD-00~700LS CURRENT ACCURACY (Typ.) ±% at VDC
Terminal Contact UL Insulation Designation (provided with) style form system approval Flux tight
eatures A miniature PCB Power Relay. form A contact configuration with quick terminal type. 5KV dielectric strength, K surge voltage between coils to contact. Ideal for high rating Home Appliances of heating
SMD Power Inductor-VLH
SMD Power Inductor-VH Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 321618C 3.2±0.3 1.6±0.2
3 V, 900 MHz Si MMIC AMPLIFIER
V, 9 MHz Si MMIC AMPLIFIER UPC77T FEATURES LOW VOLTAGE - LOW CURRENT: ma at V LOW POWER CONSUMPTION: mw TYP SUPER SMALL PACKAGE TAPE AND REEL PACKAGING OPTION AVAILABLE DESCRIPTION The UPC77T is a Silicon
3 V, 1500 MHz Si MMIC WIDEBAND AMPLIFIER
V, MHz Si MMIC WIDEBAND AMPLIFIER UPC7T FEATURES WIDE FREQUENCY RESPONSE: MHz LOW VOLTAGE OPERATION: V NOMINAL (. MIN) LOW POWER CONSUMPTION:. mw TYP SUPER SMALL PACKAGE TAPE AND REEL PACKAGING OPTION
Digital motor protection relays
Digital motor protection relays Specification DMP -S & DMP -Sa DMP -T & DMP -Ta Model No. DMP06-S/Sa DMP60-S/Sa DMP06-T/Ta DMP60-T/Ta Wiring Screw type Tunnel type Panel mount Unit or Extension Note1)
Model: MTZ22. Data. Cylinder count: 1 Displacement [m³/h]: 6,63 Cylinder capacity [cm³]: 38,1 RPM [min -1 ]: 2900 Weight [kg]: 21 Oil charge [dm³]: 1
![Model: MTZ22. Data. Cylinder count: 1 Displacement [m³/h]: 6,63 Cylinder capacity [cm³]: 38,1 RPM [min -1 ]: 2900 Weight [kg]: 21 Oil charge [dm³]: 1](/thumbs/90/102819400.jpg "Model: MTZ22. Data. Cylinder count: 1 Displacement [m³/h]: 6,63 Cylinder capacity [cm³]: 38,1 RPM [min -1 ]: 2900 Weight [kg]: 21 Oil charge [dm³]: 1")
Technical data Data Cylinder count: 1 Displacement [m³/h]: 6,63 Cylinder capacity [cm³]: 38,1 RPM [min -1 ]: 2900 Weight [kg]: 21 Oil charge [dm³]: 1 Oil type: 160PZ Crankcase heater type: PTC 35 W Maximum
Metal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Aluminum Capacitors C, Tubular, Radial Lead
Aluminum Capacitors + 105 C, Tubular, Radial Lead FEATURES Wide temperature range Radial design in two and three lead configuration Ideal SMPS output filter PERFORMANCE CHARACTERISTICS Operating Temperature:
+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
SMD Transient Voltage Suppressors
SMD Transient Suppressors Feature Full range from 0 to 22 series. form 4 to 60V RMS ; 5.5 to 85Vdc High surge current ability Bidirectional clamping, high energy Fast response time
SMD Power Inductor-VLH
SMD Power Inductor-VH PAD AYOUT Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252510 2.5±0.2
ELG-150-C series. 150W Single Output LED Power Supply IP67 IP65. File Name:ELG-150-C-SPEC
Ⅰ IP65 IP67 Ⅰ { SPECIFICATION MODEL OUTPUT INPUT RATED CURRENT CONSTANT CURRENT REGION Note.4 RATED POWER RIPPLE & NOISE (max.) Note.2 CURRENT TOLERANCE SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. Characteristics. Leakage Current(MAX) I=Leakage Current(µA) C=Nominal Capacitance(µF) V=Rated Voltage(V)
SERIES 5 C Long Life. Low impedance. (Rated Voltage 6.3~V.DC) FEATURES Load Life : 5 C 4~hours. Low impedance at khz with selected materials. SPECIFICATIONS Items Operating Temperature Range Rated Voltage
C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]
![C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]](/thumbs/90/101883046.jpg "C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]")
Multilayer Chip SDV Series Operating Temp. : -55 ~+125 FEATURES SMD type suitable for high density mounting Excellent clamping ratio and quick response time (
Bluetooth / WLAN / WiFi Ceramic Chip Antenna Ground cleared under antenna, clearance area 4.00 x 4.25/6.25 mm. Pulse Part Number W3008, W3008C
W8 Datasheet version.7. ceramic antenna. (/) Ground cleared under antenna, clearance area 4. x 4.5/6.5 mm. Pulse Part Number W8, W8C Features - Omni directional radiation - Low profile - Compact size W
SMB SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50Ω impedance for applications up to 4GHz. Suited for cables with dielectric diameters of up to 1.5mm. The connectors
SMD Shielded Power Inductors SPIA Series. SPIA Series. Product Identification
SPIA Series SPIA series is an automatic assembly constructed power inductor which is shielded with ferrite core. It is ideal for portable device DC-DC converter line. Features RoHS Compliant Miniature
No Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
Suitable for DC-DC Converters, Voltage Regulators, Decoupling Applications for Computer Motherboards, etc. Performance Characteristics
+105 C, Higher Ripple, Lower than ULG Features Higher Ripple, Lower than ULG Wide Temperature Range RoHS Compliant Applications Suitable for DC-DC Converters, Voltage Regulators, Decoupling Applications
Engineer Reference 1 / / A 35 7/16 X 7 7/8 X 23 5/8 31 1/8 X 21 7/8 X 11 1/4 14 T T 75 R410A oz/ft over 50' 265 / 318 / 388
Slim Duct, single zone split system SUBMITTAL EH035CAV / UH035CAV Specifications Nominal Capacity Cooling/Heating (Btu/h) 12,000 / 13,600 Cooling (Btu/h) 3,300-14,300 Capacity Range Heating (Btu/h) 3,100-18,000
SMD AVR AVR-M AVRL. Variable resistor. 2 Zener diode (1/10) RoHS / / j9c11_avr.fm. RoHS EU Directive 2002/95/EC PBB PBDE
(1/1) SMD RoHS AVR AVR-M AVRL Variable resistor 2Zener diode Current(A) Positive direction 1 1 1 2 1 3 1 4 1 5 Zener diode /Vz:6.8V Chip varistor /V1mA:12V 2 Zener Diodes A capacitance content 18 14 1
OWA-60E series IP67. 60W Single Output Moistureproof Adaptor. moistureproof. File Name:OWA-60E-SPEC
Single Output Moistureproof Adaptor OWA-60E series IP67 Ⅱ Ⅱ moistureproof I File Name:OWA-60E-SPEC 0-04- Single Output Moistureproof Adaptor OWA-60E series SPECIFICATION MODEL OWA-60E- OWA-60E- OWA-60E-0
Lowara SPECIFICATIONS
SH Series Centrifugal pumps entirely made of AISI 36 stainless steel according to EN 733 (ex DIN 24255). Designed to pump hot, cold and moderately aggressive liquids. Available versions: SHE Close-coupled
Bulletin 1489 UL489 Circuit Breakers
Bulletin 489 UL489 Circuit Breakers Tech Data 489-A Standard AC Circuit Breaker 489-D DC Circuit Breaker 489-A, AC Circuit Breakers 489-D, DC Circuit Breakers Bulletin 489-A Industrial Circuit Breaker
Te chnical Data Catalog
Te chnical Data Catalog 50 khz 1 kw 50 khz AE Power rating: 1 kwrms @ 2% duty cycle 7x28mm (1.13") PZT/L Active Area: 45cm 2 Urethane Window Beamwidth: -3dB: 19-6dB: 27 db: 34 Directivity Index: 18.9 Frequency
5V/9V/12V Output QC2.0+USB Auto Detect+USB-PD Type-C Application Report ACT4529
FEATURES 5V/9V/12V Output QC2.0+USB Auto Detect+USB-PD Type-C Application Report ACT4529 Wide input voltage range from 6V to 32V Transparent input voltage surge up to 40V QC2.0 decoding, 5V/9V/12V output
B37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Interference Suppression Capacitor
MOLDED BOX CONSTRUCTION, SUPPRESSION CAPACITOR, RADIAL LEAD FEATURES UL, CSA, VDE, CQC, CE, ENEC APPROVALS X2 SAFETY CAP CLASSIFICATION FOR USE IN ACROSS-THE-LINE APPLICATIONS METALLIZED POLYPROPYLENE
AKC Spectrum Analyzer User s Manual.
AKC-1291 Spectrum Analyzer User s Manual u ano un ao Prohibiting to removal the cover e m Keep the power insert clean RF in/output rating oae o n DC Power nt Restore this instrument 1. Introduction 2.
WiFi 2.4 GHz Typical performance (Test board size 80 x 37 mm, PWB top surface ground removal area x 6.25 mm, position 1 on PWB)
W3001 Datasheet version 1.0. Antenna. (04/08). Antenna Features - Omni directional radiation (Azimuthal plane) - Low profile - Compact size W x L x H (10 x 3. x 4 mm) - Low weight (600 mg) - Lead free
Single-channel Safety Barriers Series 9001
Technical Data Certificates Explosion protection Europe (CENELEC) PTB 01 ATEX 2088 PTB 01 ATEX 2135 (Installation in Zone 2) USA FM Approval 3011002 UL Approval E81680 Canada CSA 1284547 (LR 43394) Russia
Technical Data Catalog
42 to 65 khz-a (Broadband) Transformed to 100 ohms minimum (B1) 42 to 65 khz 1 kw 25 W Power Rating: 1 kw @ 1% duty cycle CW (4) : 25W in B265, PM265 15W in M265, TM265 7 x 28.6 mm (1.13 in) PZT Active
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
QUICKTRONIC PROFESSIONAL QTP5
osram.com QUICKTRONIC PROFESSIONA QTP5 ECG for T5/ 16mm, T8/ 26mm, DUUX fluorescent lamps QTP5 i.e. UMIUX T5 HO ES 01 Product Features: Up to 100.000 hours lifetime 1 amp start with optimized filament
Te chnical Data Catalog
Te chnical Data Catalog 50 khz 1 kw 50 khz AE Power rating: 1 kwrms @ 2% duty cycle 7x28mm (1.13") PZT/L Active Area: 45cm 2 Urethane Window Beamwidth: -3dB: 19-6dB: 27 db: 34 Directivity Index: 18.9 Frequency
15W DIN Rail Type DC-DC Converter. DDR-15 series. File Name:DDR-15-SPEC
DIN Rail Type DC-DC Converter ± : DIN Rail Type DC-DC Converter SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC (Note 5) OTHERS DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE
Multilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Fixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
NPF-90D series. 90W Single Output Switching Power Supply IP67. File Name:NPF-90D-SPEC
Single Output Switching Power Supply Ⅱ Ⅱ IP67 Single Output Switching Power Supply SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC OTHERS NOTE NPF-90D-12 NPF-90D-1 NPF-90D-20 NPF-90D-24
NMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
NJW CHANNEL ELECTRONIC VOLUME WITH INPUT SELECTOR AND TONE CONTROL
2-CHANNEL ELECTRONIC VOLUME WITH INPUT SELECTOR AND TONE CONTROL GENERAL DESCRIPTION The NJW94 is a 2-channel electronic volume with4-in -out stereo audio selector and Tone Control. The NJW94 performs
ALUMINUM ELECTROLYTIC CAPACITORS LKG
Lug / Snap-in Terminal Type, For Audio Equipment Disigned for high grade audio equipment, giving priority to high fidelity sound quality. The variation expansion of the. TYPE-: The low profile high tone
SAW FILTER - RF RF SAW FILTER
FEATURES - Frequencies from 0MHz to 700MHz - Custom specifications available - Industry standard package configurations - Low-loss saw component - Low amplitude ripple - RoHS compliance - Electrostatic
Metal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
15W DIN Rail Type DC-DC Converter. DDR-15 s e r i e s. File Name:DDR-15-SPEC
DIN Rail Type DC-DC Converter ± : DIN Rail Type DC-DC Converter SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC (Note 5) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER
ODLV-65 series. 65W PWM Output LED Driver IP67. IS 15885(Part 2/Sec13) File Name:ODLV-65-SPEC
THOMAS SAMUEL THOMAS SAMUEL 65W PWM Output LED Driver IP67 IS 15885(Part 2/Sec13) (for enclosure design only) R41027766 ( for ODLV6512,24,48 only) S&E A SPECIFICATION MODEL OUTPUT OTHERS NOTE DC VOLTAGE
Safety Barriers. 6 Safety Barriers KP00 III en Preferred products in stock or available at short notice
5-- KP III en Contents Single-Channel INTRINSPAK 9 8 Dual-Channel INTRINSPAK 9 with Electronic Current Limitation INTRINSPAK 94 You will find further information on the Internet www.stahl.de General Information