YAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.
|
|
|
- Λωΐς Κακριδής
- 7 χρόνια πριν
- Προβολές:
Transcript
1 YAGEO CORPORATION SMD INDUCTOR / BEADS CLH Series Multilayer Chip Inductors High Frequency Lead-free / For High Frequency Applications APPLICATIONS RF Resonance and Impedance Matching Circuit RF and Wireless Communication Information Technology Equipments, Computers, Telecommunications, Radar Detectors, Automotive Electronics, Cellular Phones, Pagers, PDAs, Keyless Remote Systems. Use in L-C Filter Configurations outline Yageo high frequency multilayer ceramic chip inductor is formed without wound wire. Monolithic laminated structure. PRODUCT IDENTIFICATION features Meet SONY SS-00259's criteria for lead-free product. Excellent Q Factor and SRF Characteristic Cost Effective Small size of 1005/1608 is suitable for small portable equipment. Supports Operating Frequency up to 6GHz with Nominal Inductance Values from 1.0nH To 330nH CLH - - * B : Bulk ; T : Tape and Reel International No. Tolerance Inductance Packaging Style (*) Dimensions Product Symbol shapes and DIMENSIONS Dimensions : mm CLH1608-W series CLH2012-S series CLH1005-S series CLH1608-S series CLH1005-H series CLH1608-H series CLH1005-H Polarity Mark Terminal Electrode C D D B A CLH1005-S CLH1608-H TYpe a B C d CLH ± ± ± ± 0.10 CLH ± ± ± ± 0.20 CLH ± ± ± ± 0.30 RECOMMENDED Pattern B A B C ~ CLH1608-S CLH1608-W CLH2012-S A C ~ ~
2 110 ELECTRICAL CHARACTERISTICS CLH1005T (0402) Series: Lead-free & rohs compliance PART NO. Inductance tolerance q Min. q typical srf dc RATED at 100MHz at 100MHz (MHz) Min. Resistance CURRENT (nh) at 100MHz at 800MHz (Ω) Max. (ma) Max. CLH1005T-1N0 -N 1.0 S , CLH1005T-1N2 -N 1.2 S , CLH1005T-1N5 -N 1.5 S , CLH1005T-1N8 -N 1.8 S , CLH1005T-2N2 -N 2.2 S , CLH1005T-2N7 -N 2.7 S , CLH1005T-3N3 -N 3.3 S, K , CLH1005T-3N9 -N 3.9 S, K , CLH1005T-4N7 -N 4.7 S, K , CLH1005T-5N6 -N 5.6 S, K , CLH1005T-6N8 -N 6.8 J, K , CLH1005T-8N2 -N 8.2 J, K , CLH1005T-10N -N 10 J, K , CLH1005T-12N -N 12 J, K , CLH1005T-15N -N 15 J, K , CLH1005T-18N -N 18 J, K , CLH1005T-22N -N 22 J, K , CLH1005T-27N -N 27 J, K , CLH1005T-33N -N 33 J, K , CLH1005T-39N -N 39 J, K , CLH1005T-47N -N 47 J, K CLH1005T-56N -N 56 J, K CLH1005T-68N -N 68 J, K CLH1005T-82N -N 82 J, K CLH1005T-R10 -N 100 J, K Note : Tolerance : -S = ±0.3nH J = ±5% K = ±10% Test Conditions : L/Q- Agilent E4991A SRF - HP8753D RDC - HP4338B / CH502BC Fixture : Agilent 16197A
3 111 ELECTRICAL CHARACTERISTICS PART NO. Inductance tolerance q Min. q typical srf dc IDC at 100MHz at 100MHz (MHz) Typical Resistance (ma) Max. (nh) at 100MHz at 800MHz (Ω) Max. CLH1005T-1N0 -H 1.0 S CLH1005T-1N2 -H 1.2 S CLH1005T-1N5 -H 1.5 S CLH1005T-1N8 -H 1.8 S CLH1005T-2N2 -H 2.2 S CLH1005T-2N7 -H 2.7 S CLH1005T-3N3 -H 3.3 S, K CLH1005T-3N9 -H 3.9 S, K CLH1005T-4N7 -H 4.7 S, K CLH1005T-5N6 -H 5.6 S, K CLH1005T-6N8 -H 6.8 J, K CLH1005T-8N2 -H 8.2 J, K CLH1005T-10N -H 10 J, K CLH1005T-12N -H 12 J, K CLH1005T-15N -H 15 J, K CLH1005T-18N -H 18 J, K CLH1005T-22N -H 22 J, K CLH1005T-27N -H 27 J, K CLH1005T-33N -H 33 J, K CLH1005T-39N -H 39 J, K CLH1005T-47N -H 47 J, K CLH1005T-56N -H 56 J, K CLH1005T-68N -H 68 J, K CLH1005T-82N -H 82 J, K CLH1005T-R10 -H 100 J, K Note : Tolerance : -S = ±0.3nH J = ±5% K = ±10% Test Conditions : L/Q- HP4291A+HP16192A SRF - HP4291A+HP16192A OR HP8753D RDC - HP4338B / CH502BC IDC - HP4291A / HP6632A
4 112 ELECTRICAL CHARACTERISTICS CLH1608T (0603) Series PART NO. Inductance tolerance q Min. q typical srf dc RATED at 100MHz at 100MHz (MHz) Min. RESISTANCE CURRENT (nh) at 100MHz at 800MHz (Ω) Max. (ma) Max. CLH1608T-1N0 -N 1.0 S , CLH1608T-1N2 -N 1.2 S , CLH1608T-1N5 -N 1.5 S , CLH1608T-1N8 -N 1.8 S , CLH1608T-2N2 -N 2.2 S , CLH1608T-2N7 -N 2.7 S , CLH1608T-3N3 -N 3.3 S, K , CLH1608T-3N9 -N 3.9 S, K , CLH1608T-4N7 -N 4.7 S, K , CLH1608T-5N6 -N 5.6 S, K , CLH1608T-6N8 -N 6.8 J, K CLH1608T-8N2 -N 8.2 J, K CLH1608T-10N -N 10 J, K , CLH1608T-12N -N 12 J, K , CLH1608T-15N -N 15 J, K , CLH1608T-18N -N 18 J, K , CLH1608T-22N -N 22 J, K , CLH1608T-27N -N 27 J, K , CLH1608T-33N -N 33 J, K , CLH1608T-39N -N 39 J, K *** CLH1608T-47N -N 47 J, K *** 1, CLH1608T-56N -N 56 J, K *** CLH1608T-62N -N 62 J, K *** CLH1608T-68N -N 68 J, K *** CLH1608T-82N -N 82 J, K *** CLH1608T-R10 -N 100 J, K *** CLH1608T-R12 -N 120 * J, K 8 * 14 * 20 ** CLH1608T-R15 -N 150 * J, K 8 * 15 * 16 ** CLH1608T-R18 -N 180 * J, K 8 * 15 * 16 ** Note : * at 50MHz ** at 300MHz *** at 500MHz Tolerance : - S = ±0.3nH J = ±5% K = ±10% Test L/Q : HP4291A+HP16192A Conditions : SRF: HP4291A+HP16192A RDC: HP4338B / CH502BC IDC: HP4291A + HP6632A
5 113 ELECTRICAL CHARACTERISTICS PART NO. Inductance tolerance q Min. q typical(mhz) srf dc IDC at 100MHz A at A at (MHz)Typcial Resistance (ma) Max (nh) 50MHz 100MHz (Ω) Max. CLH1608T-1N0S-H 1.0 S CLH1608T-1N2S-H 1.2 S CLH1608T-1N5S-H 1.5 S CLH1608T-1N8S-H 1.8 S CLH1608T-2N2S-H 2.2 S CLH1608T-2N7S-H 2.7 S CLH1608T-3N3 -H 3.3 S, K CLH1608T-3N9 -H 3.9 S, K CLH1608T-4N7 -H 4.7 S, K CLH1608T-5N6 -H 5.6 S, K CLH1608T-6N8 -H 6.8 J, K CLH1608T-8N2 -H 8.2 J, K CLH1608T-10N -H 10 J, K CLH1608T-12N -H 12 J, K CLH1608T-15N -H 15 J, K CLH1608T-18N -H 18 J, K CLH1608T-22N -H 22 J, K CLH1608T-27N -H 27 J, K CLH1608T-33N -H 33 J, K CLH1608T-39N -H 39 J, K CLH1608T-47N -H 47 J, K CLH1608T-56N -H 56 J, K CLH1608T-62N -H 62 J, K CLH1608T-68N -H 68 J, K CLH1608T-82N -H 82 J, K CLH1608T-R10 -H 100 J, K CLH1608T-R12 -H *120 J, K CLH1608T-R15 -H *150 J, K CLH1608T-R18 -H *180 J, K Note : * at 50MHz Tolerance : - S = ±0.3nH J = ±5% K = ±10% Test Conditions : L/Q - HP4291A+HP16192A SRF - HP4291A+HP16192A RDC - Digital Multimeter SC-7401 IDC - HP4291A+HP6632A
6 114 ELECTRICAL CHARACTERISTICS PART NO. Inductance tolerance q Min. q typical(mhz) srf dc IDC at 100MHz A at A at (MHz)Typcial Resistance (ma) Max (nh) 50MHz 100MHz (Ω) Max. CLH1608T-1N0S-W 1.0 S CLH1608T-1N2S-W 1.2 S CLH1608T-1N5S-W 1.5 S CLH1608T-1N8S-W 1.8 S CLH1608T-2N2S-W 2.2 S CLH1608T-2N7S-W 2.7 S CLH1608T-3N3 -W 3.3 S, K CLH1608T-3N9 -W 3.9 S, K CLH1608T-4N7 -W 4.7 S, K CLH1608T-5N6 -W 5.6 S, K CLH1608T-6N8 -W 6.8 J, K CLH1608T-8N2 -W 8.2 J, K CLH1608T-10N -W 10 J, K CLH1608T-12N -W 12 J, K CLH1608T-15N -W 15 J, K CLH1608T-18N -W 18 J, K CLH1608T-22N -W 22 J, K CLH1608T-27N -W 27 J, K CLH1608T-33N -W 33 J, K CLH1608T-39N -W 39 J, K CLH1608T-47N -W 47 J, K CLH1608T-56N -W 56 J, K CLH1608T-62N -W 62 J, K CLH1608T-68N -W 68 J, K CLH1608T-82N -W 82 J, K CLH1608T-R10 -W 100 J, K CLH1608T-R12 -W *120 J, K CLH1608T-R15 -W *150 J, K CLH1608T-R18 -W *180 J, K Note : * at 50MHz Tolerance : - S = ±0.3nH J = ±5% K = ±10% Test Conditions : L/Q - HP4291A+HP16192A SRF - HP4291A+HP16192A RDC - Digital Multimeter SC-7401 IDC - HP4291A+HP6632A
7 115 ELECTRICAL CHARACTERISTICS CLH2012T (0805) Series : Lead free & ROhs compliance PART NO. Inductance tolerance q Min. q typical srf dc IDC at 100MHz (MHz)Typical RESISTANCE (ma) Max. (nh) at 50MHz at 100MHz at 50MHz at 100MHz at 800MHz (Ω) Max. CLH2012T-1N0 -N 1.0 S > CLH2012T-1N2 -N 1.2 S > CLH2012T-1N5 -N 1.5 S > CLH2012T-1N8 -N 1.8 S > CLH2012T-2N2 -N 2.2 S > CLH2012T-2N7 -N 2.7 S > CLH2012T-3N3 -N 3.3 S, K > CLH2012T-3N9 -N 3.9 S, K CLH2012T-4N7 -N 4.7 S, K CLH2012T-5N6 -N 5.6 S, K CLH2012T-6N8 -N 6.8 J, K CLH2012T-8N2 -N 8.2 J, K CLH2012T-10N -N 10 J, K CLH2012T-12N -N 12 J, K CLH2012T-15N -N 15 J, K CLH2012T-18N -N 18 J, K CLH2012T-22N -N 22 J, K CLH2012T-27N -N 27 J, K CLH2012T-33N -N 33 J, K CLH2012T-39N -N 39 J, K CLH2012T-47N -N 47 J, K CLH2012T-56N -N 56 J, K CLH2012T-68N -N 68 J, K CLH2012T-82N -N 82 J, K CLH2012T-R10 -N 100 J, K CLH2012T-R12 -N 120 * J, K CLH2012T-R15 -N 150 * J, K CLH2012T-R18 -N 180 * J, K CLH2012T-R22 -N 220 * J, K CLH2012T-R27 -N 270 * J, K CLH2012T-R33 -N 330 * J, K Note : * at 50MHz Tolerance : - S = ±0.3nH J = ±5% K = ±10% Test Conditions : Agilent E4991A Agilent 16197A SRF - HP8753D RDC - HP4338B/CH502BC
8 116 Packaging Specifications Tape Dimensions Tape Materia Cover Tape 160mm MIN. Blank Part Chip Mounting Part Blank 330mm MIN. Leader Carrier tape: Polystyrene for 2012 Paper for 1608, 1005 Cover type : Polystyrene Reel Dimensions Dimensions : mm TYPE Tape Dimensions Reel Dimensions Reel Dimensions quantity Tape A B T W P F K A B C D A B C CLH1005 B ~ CLH1608 B ~ CLH2012 A ~
9 117 RECOMMEND SOLDERING CONDITIONS for:cl/ CLH/ SQV/ SMD power inductors/ SMD Chip Beads/ SMD Filters, Transformers, Current Sensors temperature C pre-heating soldering natural cooling 260 C 230 C 160 C 150 C 60 second time:second 120 second 80 second 5~10 second for: lead solder for: lead-free solder
SMD Wire Wound Ferrite Chip Inductors - SQC Series. SQC Series. Product Identification. Shapes and Dimensions
SMD Wire Wound Ferrite Chip Inductors - SQC Series SQC Series These miniature chip inductors, SQC Series, wound on a special ferrite core and are excellent to be used as choke coil in DC power supply circuits.
SB/NB/HF/GB/PB/UPB. SMD Chip Beads OUTLINE PRODUCT IDENTIFICATION SHAPES AND DIMENSIONS
Yageo corporation INDUCTORS / BEADS SMD Chip Beads SB/NB/HF/GB/PB/UPB OUTLINE Yageo offers hundreds of multi-layered ferrite chip beads with various sizes, frequency characteristics, and a wide range of
Data sheet Thin Film Chip Inductor AL Series
Data sheet Thin Film Chip Inductor AL Series Scope - 0201 and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and
High Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
Multilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
SMD Wire Wound Ferrite Chip Inductors - LS Series. LS Series. Product Identification. Shape and Dimensions / Recommended Pattern LS0402/0603/0805/1008
SMD Wire Wound Ferrite Chip Inductors - LS Series LS Series LS Series is the newest in open type ferrite wire wound chip inductors. The wire wound ferrite construction supports higher SRF, lower DCR and
IWCSeries FEATURES APPLICATION ORDERING CODE TRIGON COMPONENTS. Configurations: Dimension (mm) IWC C G 1608 K 22N T (1) (2) (3) (4) (5) (6) (7)
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. FEATURES The monolithic construction performs high reliability and ensures a closed magnetic flux in a component avoids magnetic and interference
2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%
![2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%](/thumbs/78/78109689.jpg "2R2. 2 (L W H) [mm] Wire Wound SMD Power Inductor. Nominal Inductance Packing Tape & Reel. Design Code M ±20%")
Wire Wound SMD Power Inductors WPN Series Operating temperature range : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite
HIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
Configurations: Dimension (mm) B (max) A (max) 0.20 IWCCG1005. Inductance Range IWCCG ~ IWCCG ~ 1000 IWCCG
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 2012 [0805] 2520 [1008] 3216 [1206] 3225 [1210]
![Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 2012 [0805] 2520 [1008] 3216 [1206] 3225 [1210]](/thumbs/86/93358879.jpg "Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 2012 [0805] 2520 [1008] 3216 [1206] 3225 [1210]")
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -4 ~+85 FEATURES Small chip suitable for surface mounting High inductance with ferrite material APPLICATIONS Video cameras, liquid crystal
Low Value Multilayer Inductors (LMCI Series)
Structure Features: RoHS Compliant and Halogen Free Closed magnetic circuit configuration avoids crosstalk and is suitable for high density PCBs Size range: 0201, 05, 1608 Perfect shape for automatic mounting
WIRE WOUND CHIP INDUCTORS
FEATURES High Self-Resonance Frequency Stable inductance at high frequency Tight inductance tolerance High Q factory High current Low DCR APPLICATIONS Antenna amplifiers Mobile phone Key entry GPS (Global
Cal-Chip Electronics, Incorporated Multilayer Chip Inductors For High Frequency
Cal-Chip Electronics, Incorporated Multilayer Chip Inductors For High GHF SERIES FEATURES Multilayer inductor made of advanced ceramics with low-resistivity silver used as internal conductors provides
Thin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
SMD Power Inductor-VLH
SMD Power Inductor-VH Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 321618C 3.2±0.3 1.6±0.2
Thin Film Chip Inductor
Scope -Calchip s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Calchip s design provides high, excellent Q, and superior temperature stability. This highly
HFC SERIES High Freq. Wound Ceramic Chip Inductors
FEATURES High frequency applications. Low DC resistance and high allowable DC current. Close tolerance application.2% tolerence is available for particular inductance values. Small footprint as well as
Sunlord Specifications subject to change without notice. Please check our website for latest information. Revised 2018/04/15
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
SMD Shielded Power Inductors SPIA Series. SPIA Series. Product Identification
SPIA Series SPIA series is an automatic assembly constructed power inductor which is shielded with ferrite core. It is ideal for portable device DC-DC converter line. Features RoHS Compliant Miniature
SMD Power Inductor-VLH
SMD Power Inductor-VH PAD AYOUT Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252510 2.5±0.2
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 1608 [0603] 2012 [0805]
![Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 1608 [0603] 2012 [0805]](/thumbs/86/93359020.jpg "Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 1608 [0603] 2012 [0805]")
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -4 ~+85 FEATURES Small chip suitable for surface mounting High inductance with ferrite material APPLICATIONS Video cameras, liquid crystal
AL Series - Thin Film Chip Inductor
Features A Photo Lithographic Single Layer Ceramic Chip High SRF, Excellent, Superior Temperature Stability Tight Tolerance of ± % or ±.nh Self Resonant Frequency Controlled within % Stable Inductance
Wire Wound Chip Ceramic Inductor SDWL-C Series Operating Temp. : -40 ~ N
Wire Wound Chip Ceramic Inductor SDWL-C Series Operating Temp. : -4 ~+25 FEATURES Small chip suitable for surface mounting High value and high self-resonant frequency with ceramic material Tight inductance
B37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
DC-DC converter circuits for mobile phones, wearbale devices, DVCs, HDDs, etc.
Multilayer Chip Power Inductor MPH Series Operating Temp. : -40 ~+85 FEATURES Higher DC bias current and lower DC resistance due to Trench Technology Low profile and thin thickness Monolithic structure
Sunlord. Wire Wound SMD Power Inductors SWCS Series SWCS XXXX -XXX T. Operating Temperature: -25 ~ +105 FEATURES APPLICATIONS PRODUCT IDENTIFICATION
Wire Wound SMD Power Inductors SWCS Series Operating Temperature: -25 ~ +105 FEATURES Various high power inductors are superior to be high saturation Suitable for surface mounting equipment APPLICATIONS
PRODUCT IDENTIFICATION SWPA 3012 S 1R0 N T
Wire Wound SMD Power Inductors SWPA Series Operating temperature range: -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded conruction reduces buzz noise to ultra-low levels Metallization
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. PRODUCT DETAIL Electrical Characteristics μh L (Min) Q MHz (Min) SRF Ω DCR IDC ma TEST FREQ: MHz TEST LEVEL: 100 mv Test Instruments HP4291
Multilayer Chip Inductor / CL TYPE
Multilayer Chip Inductor / CL TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no lead
INPAQ Global RF/Component Solutions
MCB & MHC W Series Specification Product Name Series Multilayer Chip Ferrite Bead MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516 MCB and MHC Series Chip Ferrite Bead for Automotive Applications
WLCW1005 SMD Wire Wound Ceramic Chip Inductors
WCW1005 SMD Wire Wound Ceramic Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WCW1005 Series_V5.0 Mar. 2016 Features 1. Standard chip size bobbin with
Sunlord. Wire Wound SMD Power Inductors SPH Series Operating Temp. : -40 ~+125 (Including self-heating) 2R2 SPH
Wire Wound SMD Power Inductors SPH Series Operating Temp. : -4 ~+25 (Including self-heating) FEATURES Magnetic-resin shielded construction reduces buzz noise to ultra-low levels Metallization on ferrite
No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor
PART NUMBERING SYSTEM SI F 0805 K 780 F (1) (2) (3) (4) (5) (6) No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor (2) Type F Ferrite
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES) (8) 95-8365 venkel.com Features: RoHS Compliant and Halogen Free Good Q values High SRF range: 1nH to 47uH Tolerance: ±.2nH, ±.3nH, ±2%, ±5%, ±1% High
High Frequency Ceramic Inductors TLNMH0603P Series
(1/5) High Frequency Ceramic Inductors Features High Q inductors for high frequency applications Multilayer Ceramic Optimal configuration for improved Q to 800MHz or higher 0.1nH step inductance values
Table of contents INDEX
Table of contents INDEX Quick Product Information... 2 Part Number Explanation and Coding Rule... 3 Wire Wound Ceramic Chip Inductors WLCW1005 Series... 4 Wire Wound Ceramic Chip Inductors WLCW1608 Series...
Power Inductor LVS Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering LVS 6645 L - 1R M - AU Series Name Dimensions Code Inductance Internal Code (mm) (uh) Tolerance 4412 4.x4.x1.2 L Low DCR R47.47 M ±% 4418 4.x4.x1.8
SMD Multilayer Ferrite Chip Beads. Multilayer Ferrite Chip Beads. Product Identification. Dimension Conversion
SMD Multilayer Ferrite Chip Beads Multilayer Ferrite Chip Beads Chilisin offers a wide range of multi-layered ferrite chip beads with various sizes, frequency characteristics, and impedance values for
SCDS Series. SMD Power Inductors APPLICATIONS FEATURES PRODUCT IDENTIFICATION. SHAPES AND DIMENSIONS Unit: mm SCDS - XXX
Yageo corporation INUTORS / S SS Series SM Power Inductors PPLITIONS Power Supply for VTRs, O quipment, L Televisions, Notebook Ps, Portable ommunication quipment - onverters, etc. FTURS vailable in magnetically
MCB and MHC Series Chip Ferrite Bead for Automotive Applications Qualified based on AEC-Q200
RoHS MC and MHC Series Chip Ferrite ead for Automotive Applications Qualified based on AEC-Q200 Explanation of Part Number MC 1608 W 12 1 H P - 1 2 3 4 5 6 7 8 9 1. Series Name 2. Size Code: the first
1.575 GHz GPS Ceramic Chip Antenna Ground cleared under antenna, clearance area 4.00 x 4.25 mm / 6.25 mm. Pulse Part Number: W3011 / W3011A
W0 Datasheet version. ceramic antenna. (09/08).575 GHz Ceramic Chip Antenna Ground cleared under antenna, clearance area x 4.5 mm / 6.5 mm. Pulse Part Number: W0 / W0A Features - Omni directional radiation
SCL Series. Multilayer Chip Ferrite Inductor
Multilayer Chip Ferrite Inductor Features 1 Monolithic structure for high reliability 2 Compact size inductor possible 3 No cross coupling due to magnetic shield 4 Perfect shape for mounting with no directionality
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Polymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
Unshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
Ferrite Chip Bead(Lead Free)
Ferrite Chip Bead(Lead Free) YCM-Series 1.Features 1. Monolithic inorganic material construction. 2. Closed magnetic circuit avoids crosstalk. 3. S.M.T. type. 4. Suitable for reflow soldering. 5. Shapes
C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]
![C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]](/thumbs/90/101883046.jpg "C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]")
Multilayer Chip SDV Series Operating Temp. : -55 ~+125 FEATURES SMD type suitable for high density mounting Excellent clamping ratio and quick response time (
Configurations: Dimension (mm) 0.60 ±0.03 IMCH ±0.1 IMCH ±0.2 IMCH IMCH ± IMCH ±0.
Multilayer Chip s for High Frequency Configurations: FEATURES To prevent EMI interference noises between. High Q and high reliability and ceramic. Monolithic inorganic material construction. Shapes and
High Current Chip Ferrite Bead MHC Series
High Current Chip Ferrite Bead MHC Series Features Combination of high frequency noise suppression with capability of handing high current. The current rating up to 6 Amps with low DC. Applications High
Ceramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
± 20% ± 5% ± 10% RENCO ELECTRONICS, INC.
RL15 RL16, RL17, RL18 MINIINDUCTORS CONFORMALLY COATED MARKING The nominal inductance is marked by a color code as listed in the table below. Color Black Brown Red Orange Yellow Green Blue Purple Grey
SMD Shielded Power Inductor HPCRHF2D /3D /4D Series
SMD Shielded Power Inductor HPCRHF2D /3D /4D Series Features: l SMD type power inductors by the electrode is attached to the ferrite core directly. l Magnetically shielded to prevent noise radiation. Applications:
Chip Ferrite Bead MCB-S/B Series
Chip Ferrite Bead MCB-S/B Series Features Monolithic inorganic material construction Closed magnetic circuit avoids crosstalk SMD Type & suitable for reflow and wave soldering Available in various sizes
Ceramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
RC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
Feature. 8. High reliability. Application. 1. Series name. 2. Dimension. ( See Details ) 3. Material ± ± ± ± 0.
Feature 1. Monolithic inorganic material construction 2. Closed magnetic circuit avoids crosstalk 3. S.M.T. type 4. Suitable for flow and reflow soldering 5. Shapes and dimensions follow E.I.A. SPEC 6.
Polymer PTC Resettable Fuse: KMC Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. IA size: 0603, 0805, 1206, 1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small
Unshielded Power Inductors
Unshielded Power Inductors /080/0804/0810/106/106 Series Inductance with current and temperature: Inductance is measured with P-484 LR Meter or equivalent. Inductance drops 10% typical at Isat level with
QFLC R0 K - D
Feature. Ferrite core wire wound construction. 2. Provide low DC resistance and high current. 3. Precision inductance tolerance is available. 4. Small footprint as well as profile. 5. All support Lead-Free
CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Polymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
SMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)
Marking Outline: Low DCR, high rated current. Magnetic shielded structure Lead free product, RoHS compliant. RoHS Carrier tape packing, suitable for SMT process. SMT Widely used in buck converter, laptop,
No Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
YJM-L Series Chip Varistor
Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
SLD Series. SMD Type Shielded Power Inductors. Features. Applications. Lead Free Part Numbering. Dimensions
SMD Type Shielded Power Inductors Features 1. Magnetically shielded Version. 2. High inductance /High Power Inductor. 3. The products contain no lead and also support lead-free soldering. Pb Applications
AVX SMD Power Inductors
AVX SMD Power Inductors www.avx.com Version 14.7 Table of Contents LMax SMD Non-Shield Power Inductor LMXN Series Non-Shielded Style B 2-3 Inductance Range: 0.47-470 μh Rated Current: 0.53-30 A LMXN Series
Feature. 8. High reliability. Application. 1. Series name. 2. Dimension. ( See Details ) 3. Material. D a b a 0.25 ± ± ± 0.
Feature 1. Monolithic inorganic material construction 2. Closed magnetic circuit avoide crosstalk 3. S.M.T. type 4. Suitable for flow and reflow soldering 5. Shapes and dimensions follow E.I.A. SPEC 6.
ISM 868 MHz Ceramic Antenna Ground cleared under antenna, clearance area mm x 8.25 mm. Pulse Part Number: W3013
W0 Datasheet version.. Ceramic Antenna. (0/08). Ceramic Antenna Ground cleared under antenna, clearance area 0.80 mm x 8.5 mm. Pulse Part Number: W0 Features - Omni directional radiation - Low profile
4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
SMD Multilayer Ferrite Chip Beads. Multilayer Ferrite Chip Beads. Product Identification. Dimension Conversion
SMD Multilayer Ferrite Chip Beads Multilayer Ferrite Chip Beads Chilisin offers a wide range of multi-layered ferrite chip beads with various sizes, frequency characteristics, and impedance values for
SMD Multilayer Ferrite Chip Beads. Multilayer Ferrite Chip Beads. Product Identification. Dimension Conversion
SMD Multilayer Ferrite Chip Beads Multilayer Ferrite Chip Beads Chilisin offers a wide range of multi-layered ferrite chip beads with various sizes, frequency characteristics, and impedance values for
NTC Thermistor:TSM type
Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended
NTC Thermistor:TTC3 Series
Features. RoHS compliant 2. Halogen-Free(HF) series are available 3. Body size: Ф3mm 4. Radial lead resin coated 5. Operating temperature range: -40 ~+25 6. Wide resistance range 7. Cost effective 8. Agency
DC-DC converter circuits for mobile phones, wearable devices, DVCs, HDDs, etc. MPH S R47 M T B01
Multilayer Chip Power Inductor MPH Series Operating emp. : -55 ~+25 FEAURES Higher DC bias current and lower DC resistance due to trench technology ow profile and thin thickness Monolithic structure for
Metal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
WIRE-WOUND CHIP INDUCTOR FERRITE/OPENTYPE
WIRE-WOUND CHIP INDUCTOR FERRITE/OPENTYPE 0805CS (2012) Ferrite Series (0.12~33µH) Part Number Inductance µh Percent Tolerance Q Min SRF Min MHz RDC Max Ohms IDC Max ma Color Code 0805CS-121E_FS 0.12@
NTC Thermistor:SCK Series
Features. RoHS & HF compliant 2. Body size: Ф5mm ~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70
ISM 900 MHz Ceramic Antenna Ground cleared under antenna, clearance area mm x 8.25 mm. Pulse Part Number: W3012
W0 Datasheet version.. Ceramic Antenna. (0/08). Ceramic Antenna Ground cleared under antenna, clearance area 0.80 mm x 8.5 mm. Pulse Part Number: W0 Features - Omni directional radiation - Low profile
NPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
Fixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
Feature. shock and pressure. -Tighter tolerance down to ±2% -Smaller size of 0402 (1005) -CATV Filter, Tuner. -Cable Modem/ XDSL Tuner.
Wire Wound Chip Inductor-WL Series Feature -Wire wound ceramic construction provide high SRF -Ultra-compact inductors provide exceptional Q values -Low profile, high current are available -Miniature SMD
SMD Multilayer Ferrite Chip Beads. Multilayer Ferrite Chip beads. Product Identification. Dimension Conversion
SMD Multilayer Ferrite Chip Beads Multilayer Ferrite Chip beads Chilisin offers hundreds of multi-layered ferrite chip beads with various sizes, frequency characteristics, and a wide range of impedance
MULTILAYER CHIP VARISTOR JMV S & E Series: (SMD Surge Protection)
INTRODUCTION Metal Oxide based chip varistors (JMVs) are used for transient suppression. JMVs have non-linear - behavior, which is similar to that of Zener Diode. Each grain in JMV exhibits small p-n junction
Sunlord 1R0. Operating FEATURES. low loss. Feature Type MWSA. Nominal Inductance Nominal Value. Example R15 1R
Moldedd SMD Power Inductors MWS Series Operating Temp. : -40 ~+125 (Including self-heating) FETURES Metal material for larg ge current and low loss Closed magnetic circuit design reduces leakage flux Halogen
FEATURES APPLICATION PRODUCT T IDENTIFICATION PRODUCT T DIMENSION MAG.LAYERS
FEATURES RoHS compliant. Super low resistance, ultra high current rating. High performance (I sat) realized by metal dust core. Frequency Range: up to 1MHz. APPLICATION PDA, notebook, desktop, and server
NPIS Shielded Power Inductors
FEATURES SHIELDED POWER INDUCTOR ULTRA LOW PROFILE (1.0 ~ 4.5mm MAX. HEIGHT) SURFACE MOUNTABLE CONSTRUCTION INDUCTANCE VALUES UP TO 220µH TAPED AND REELED FOR AUTOMATIC INSERTION CHARACTERISTICS Case Size
TODA-ISU Corporation. SMD Power Inductor. SPI series. SMD Team
SMD Power Inductor SPI series TODA-ISU Corporation Advantages & Applications Advantages Low profile High current capability & Low DCR Low temperature rise Increased thermal efficiency Patent (Coil Integrated
SMD Power chokes- SPD Series SPD series chokes For High Current Use
SMD Power chokes- SPD Series SPD series chokes For High Current Use Features 1.Shielded construction. 2.High current rating up to DC Amp 3.High frequency range up to 5.MHz 4.Ultra low buzz noise, due to
Bluetooth / WLAN / WiFi Ceramic Chip Antenna Ground cleared under antenna, clearance area 4.00 x 4.25/6.25 mm. Pulse Part Number W3008, W3008C
W8 Datasheet version.7. ceramic antenna. (/) Ground cleared under antenna, clearance area 4. x 4.5/6.5 mm. Pulse Part Number W8, W8C Features - Omni directional radiation - Low profile - Compact size W
Fixed Inductors / AL TYPE
.Features: 1.Coating epoxy resin that ensures the humidity resistance to be long life. 2.Contribute to be high Q and selfresonant frequencies.applications: 1.Electronics products. 2.Communication equipment.
SMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
THICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Current Sense Metal Strip Resistors (CSMS Series)
Features: Range: 1mΩ to 100mΩ Low TCR as low as 75PPM High power rating Custom Values available RoHS Compliant and Halogen Free Operating Temperature: -55 C to +170 C Part Number Structure CSMS 0805 -