ΓΕΝΙΚΟ ΕΠΙΤΕΛΕΙΟ ΝΑΥΤΙΚΟΥ ΙΕΥΘΥΝΣΗ ΣΥΜΒΑΣΕΩΝ TMHMA ΣΥΜΒΑΣΕΩΝ ΑΜΥΝΤΙΚΟΥ ΥΛΙΚΟΥ 21 Ιουλ.17 ΤΕΧΝΙΚΗ ΠΕΡΙΓΡΑΦΗ

Μέγεθος: px

Εμφάνιση ξεκινά από τη σελίδα:

Download "ΓΕΝΙΚΟ ΕΠΙΤΕΛΕΙΟ ΝΑΥΤΙΚΟΥ ΙΕΥΘΥΝΣΗ ΣΥΜΒΑΣΕΩΝ TMHMA ΣΥΜΒΑΣΕΩΝ ΑΜΥΝΤΙΚΟΥ ΥΛΙΚΟΥ 21 Ιουλ.17 ΤΕΧΝΙΚΗ ΠΕΡΙΓΡΑΦΗ"

Ευθύμιος Γαλάνη
6 χρόνια πριν
Προβολές:

1 ΠΡΟΣΘΗΚΗ στο ΠΑΡΑΡΤΗΜΑ «Β» ΣΤΗΝ ΠΡΟΚΗΡΥΞΗ ΙΑΓΩΝΙΣΜΟΥ 09/207 Φ.60.4/4Α3Μ/284265/Σ.206 ΓΕΝΙΚΟ ΕΠΙΤΕΛΕΙΟ ΝΑΥΤΙΚΟΥ ΙΕΥΘΥΝΣΗ ΣΥΜΒΑΣΕΩΝ TMHMA ΣΥΜΒΑΣΕΩΝ ΑΜΥΝΤΙΚΟΥ ΥΛΙΚΟΥ 2 Ιουλ.7 ΤΕΧΝΙΚΗ ΠΕΡΙΓΡΑΦΗ ΠΑΡΟΧΗ ΥΠΗΡΕΣΙΩΝ ΤΕΛΙΚΩΝ ΡΥΘΜΙΣΕΩΝ, ΟΚΙΜΩΝ, ΚΑΙ ΠΙΣΤΟΠΟΙΗΣΗΣ ΚΙΝΗΤΗΡΩΝ ΠΡΟΩΣΕΩΣ ΤΥΠΟΥ «SIEMENS PERMASYN MOTOR FR6439-2NG32-Z» Υ/Β ΠΙΠΙΝΟΣ, Υ/Β ΜΑΤΡΩΖΟΣ ΚΑΙ Υ/Β ΚΑΤΣΩΝΗΣ ΤΗΣ ΚΥΒΕΡΝΗΣΕΩΣ ΤΕΧΝΙΚΗΣ

2 . Η παροχή υπηρεσιών αφορά την εκτέλεση των τελικών ρυθµίσεων, δοκιµών και πιστοποίηση των κινητήρων τυπου «Siemens Permasyn Motor FR6439-2NG32-Z» των Υ/Β ΠΙΠΙΝΟΣ, Υ/Β ΜΑΤΡΩΖΟΣ και Υ/Β ΚΑΤΣΩΝΗΣ και περιλαµβάνει την εκτέλεση των κάτωθι εργασιών ανά Υ/Β: the α. Υ/Β ΠΙΠΙΝΟΣ (). Replacement of shaft bearing seal rings DE & NDE (2). Disassembling, Assembling bearing shield DE (3). Disassembling, Assembling bearing shield NDE (4). 3/2 way valves: Build out and in for maintenance by (5). Safety valves: Build out and in for maintenance by the (6). Switch control unit: Build out and in for maintenance by the (7). Function test of leakage water sensor DE & NDE (8). Inspection of leakage water box DE (9). Replacement of vibration dampers (0). Walther quick-release couplings: Build out and in for maintenance by the maintenance (). quick-release couplings: Build out and in for (2). Tightness test of inner cooling circuit with Heleakage test at increased pressure (3). Tightness test of outer cooling circuit with over pressure as Bubble Emission Techniques Test and water pressure test encoder (4). Disassembling, Assembling rotor position encoder (5). Adjustment and function check of rotor position (6). Inspection of all cooling hoses (7). Cleaning of the accessible oil contaminated areas in the propulsion motor (8). Demounting and mounting of all inverter modules (9). Cleaning of the accessible oil contaminated areas at the propulsion motor

3 the β. Υ/Β ΜΑΤΡΩΖΟΣ (). Replacement of shaft bearing seal rings DE & NDE (2). Disassembling, Assembling bearing shield DE (3). Disassembling, Assembling bearing shield NDE (4). 3/2 way valves: Build out and in for maintenance by (5). Safety valves: Build out and in for maintenance by the (6). Switch control unit: Build out and in for maintenance by the (7). Function test of leakage water sensor DE & NDE (8). Inspection of leakage water box DE (9). Replacement of vibration dampers (0). Walther quick-release couplings: Build out and in for maintenance by the maintenance (). quick-release couplings: Build out and in for (2). Tightness test of inner cooling circuit with Heleakage test at increased pressure (3). Tightness test of outer cooling circuit with over pressure as Bubble Emission Techniques Test and water pressure test encoder (4). Disassembling, Assembling rotor position encoder (5). Adjustment and function check of rotor position (6). Inspection of all cooling hoses (7). Cleaning of the accessible oil contaminated areas in the propulsion motor (8). Demounting and mounting of all inverter modules (9). Cleaning of the accessible oil contaminated areas at the propulsion motor γ. Υ/Β ΚΑΤΣΩΝΗΣ (). Replacement of shaft bearing seal rings DE & NDE (2). Disassembling, Assembling bearing shield DE (3). Disassembling, Assembling bearing shield NDE (4). Replacement of damaged cooling hoses

4 the (5). 3/2 way valves: Build out and in for maintenance by (6). Safety valves: Build out and in for maintenance by the (7). Switch control unit: Build out and in for maintenance by the (8). Function test of leakage water sensor DE & NDE (9). Inspection of leakage water box DE (0). Replacement of vent pipe DE & NDE bearing (). Replacement of corroded conical pins (2). Replacement of vibration dampers (3). Walther quick-release couplings: Build out and in for maintenance by the maintenance (4). quick-release couplings: Build out and in for (5). Tightness test of inner cooling circuit with Heleakage test at increased pressure (6). Tightness test of outer cooling circuit with over pressure as Bubble Emission Techniques Test and water pressure test encoder (7). Disassembling, Assembling rotor position encoder (8). Adjustment and function check of rotor position (9). Modification of the power inverter modules 2. Οι εργασίες πρέπει να εκτελεστούν σύµφωνα µε την ως άνω τεχνική περιγραφή, όπως προκύπτει από τα τεχνικά εγχειρίδια της συσκευής και τις οδηγίες του κατασκευαστή. Το σύνολο των εργασιών θα πιστοποιείται από τον κατασκευαστή. Ακριβές Αντίγραφο Για την Ακρίβεια Πλοίαρχος (Μ) Β. Πετρογιάννης ΠΝ ΓΕΝ/ ΕΞ/ ιευθυντής Πρ. Υ/Β ΜΠΥ ΠΕ ΙΟΙΚ.-ΟΙΚ. Α ΒΑΘΜΟΥ Σ. Λεβεντοπούλου Τµηµατάρχης Γ-Ι/ΓΕΝ

5 ΠΡΟΣΘΗΚΗ «2» στο ΠΑΡΑΡΤΗΜΑ «Β» ΣΤΗΝ ΠΡΟΚΗΡΥΞΗ ΙΑΓΩΝΙΣΜΟΥ 09/207 Φ.60.4/4Α3Μ/284265/Σ.206 ΓΕΝΙΚΟ ΕΠΙΤΕΛΕΙΟ ΝΑΥΤΙΚΟΥ ΙΕΥΘΥΝΣΗ ΣΥΜΒΑΣΕΩΝ TMHMA ΣΥΜΒΑΣΕΩΝ ΑΜΥΝΤΙΚΟΥ ΥΛΙΚΟΥ 2 Ιουλ. 7 ΠΙΝΑΚΑΣ ΠΡΟΜΗΘΕΥΤΕΩΝ ΕΡΓΑΣΙΩΝ ΥΠΗΡΕΣΙΩΝ Α. Υ/Β ΠΙΠΙΝΟΣ Α/Α ΠΕΡΙΓΡΑΦΗ ΠΟΣΟΤΗΤΑ. Replacement of shaft bearing seal rings DE & NDE 2. Disassembling, Assembling bearing shield DE 3. Disassembling, Assembling bearing shield NDE /2 way valves: Build out and in for maintenance by the Safety valves: Build out and in for maintenance by the Switch control unit: Build out and in for maintenance by the 7. Function test of leakage water sensor DE & NDE 8. Inspection of leakage water box DE 9. Replacement of vibration dampers 0. Walther quick-release couplings: Build out and in for maintenance by the. Quick-release couplings: Build out and in for maintenance Tightness test of inner cooling circuit with He-leakage test at increased pressure Tightness test of outer cooling circuit with over pressure as Bubble Emission Techniques Test and water pressure test

6 4. Disassembling, Assembling rotor position encoder 5. Adjustment and function check of rotor position encoder 6. Inspection of all cooling hoses 7. Cleaning of the accessible oil contaminated areas in the propulsion motor 8. Demounting and mounting of all inverter modules 9. Cleaning of the accessible oil contaminated areas at the propulsion motor B. Υ/Β ΜΑΤΡΩΖΟΣ Α/Α ΠΕΡΙΓΡΑΦΗ ΠΟΣΟΤΗΤΑ. Replacement of shaft bearing seal rings DE & NDE 2. Disassembling, Assembling bearing shield DE 3. Disassembling, Assembling bearing shield NDE /2 way valves: Build out and in for maintenance by the Safety valves: Build out and in for maintenance by the Switch control unit: Build out and in for maintenance by the 7. Function test of leakage water sensor DE & NDE 8. Inspection of leakage water box DE 9. Replacement of vibration dampers 0. Walther quick-release couplings: Build out and in for maintenance by the. quick-release couplings: Build out and in for maintenance 2. Tightness test of inner cooling circuit with He-leakage test at increased pressure

7 3. Tightness test of outer cooling circuit with over pressure as Bubble Emission Techniques Test and water pressure test 4. Disassembling, Assembling rotor position encoder 5. Adjustment and function check of rotor position encoder 6. Inspection of all cooling hoses 7. Cleaning of the accessible oil contaminated areas in the propulsion motor 8. Demounting and mounting of all inverter modules 9. Cleaning of the accessible oil contaminated areas at the propulsion motor Γ. Υ/Β ΚΑΤΣΩΝΗΣ Α/Α ΠΕΡΙΓΡΑΦΗ ΠΟΣΟΤΗΤΑ. Replacement of shaft bearing seal rings DE & NDE 2. Disassembling, Assembling bearing shield DE 3. Disassembling, Assembling bearing shield NDE 4. Replacement of damaged cooling hoses /2 way valves: Build out and in for maintenance by the Safety valves: Build out and in for maintenance by the Switch control unit: Build out and in for maintenance by the 8. Function test of leakage water sensor DE & NDE 9. Inspection of leakage water box DE 0. Replacement of vent pipe DE & NDE bearing. Replacement of corroded conical pins

8 2. Replacement of vibration dampers 3. Walther quick-release couplings: Build out and in for maintenance by the 4. quick-release couplings: Build out and in for maintenance Tightness test of inner cooling circuit with He-leakage test at increased pressure Tightness test of outer cooling circuit with over pressure as Bubble Emission Techniques Test and water pressure test 7. Disassembling, Assembling rotor position encoder 8. Adjustment and function check of rotor position encoder 9. Modification of the power inverter modules Ακριβές Αντίγραφο Για την Ακρίβεια Πλοίαρχος (Μ) Β. Πετρογιάννης ΠΝ ΓΕΝ/ ΕΞ/ ιευθυντής Πρ. Υ/Β ΜΠΥ ΠΕ ΙΟΙΚ.-ΟΙΚ. Α ΒΑΘΜΟΥ Σ. Λεβεντοπούλου Τµηµατάρχης Γ-Ι/ΓΕΝ

Σχετικά έγγραφα

ΓΕΝΙΚΟ ΕΠΙΤΕΛΕΙΟ ΝΑΥΤΙΚΟΥ Ε ΚΛΑ ΟΣ. TMHMA Ι Τηλέφ Φ.601.4/14A3M/ Σ. 2016

Α ΙΑΒΑΘΜΗΤΟ ΠΡΟΣ: Πίνακας Αποδεκτών ΚΟΙΝ : ΕΠΕΙΓΟΝ ΓΕΝΙΚΟ ΕΠΙΤΕΛΕΙΟ ΝΑΥΤΙΚΟΥ Ε ΚΛΑ ΟΣ ΙΕΥΘΥΝΣΗ Ε2 TMHMA Ι Τηλέφ. 210-6551690 Φ.601.4/14A3M/284265 Σ. 2016 ΠΡΟΚΗΡΥΞΗ ΜΕ ΑΡΙΘΜΟ 09/17 ΠΑΡΟΧΗ ΥΠΗΡΕΣΙΩΝ ΤΕΛΙΚΩΝ