the smartest energy Floor standing DHW (Domestic Hot Water) storage tanks for Forced Circulation Solar systems

Transcript

1 the smartest energy Floor standing DHW (Domestic Hot Water) storage tanks for Forced Circulation olar systems 15

2 Floor standing single coil DHW storage tanks Material: teel sheet EN AI DC0-1 DCP Welding: Metal-Tungsten Inert Gas welding Protection coating: High quality glass Enamel and protection anode Maximum working pressure: 10 bar Maximum water test pressure: 16 bar Maximum operating temperature: 95 C Insulation: Polyurethane foam of 50mm thickness, density 52kg/m³ Coil type exchanger: teel Tube Maximum exchanger test pressure: 25 bar Back up electric heater: Upon request Flange: Diameter Ø 170 mm For all Forced Circulation systems where olar DHW storage tanks enamelled, epoxy protected and Combined are included, it is necessary: Installation of expansion vessel/s, ecurity pressure relief valve/s Cathodic protection anode for both primary and secondary circuits. pricelist PART Nr. BLLTGL150 BLLTGL200 BLLTGL300 BLLTGL500 Total actual capacity Exchanger s actual capacity Exchanger 1 inlet/outlet Exchanger s area (m²) 0,78 0,986 0,986 1,92 Exchanger s diameter 3/4 3/4 3/4 1 Cold water inlet Hot water outlet Anode - Flange diameter 2x Ø170 2x Ø170 2x Ø170 2x Ø170 Output, th. fluid 90 C, water from 10 to 45 (kw/l/h) 13,1 A Cold water inlet J Hot water outlet C Exchanger 1 inlet A Exchanger 1 outlet B Recirculation F Flange - manhole H Total height E Thermostat K Thermometer G Back-up heating element posit D Diameter Ø560 Ø600 Ø630 Ø750 Operation Pressure / bars Total weight (kg) ,4 22,9 25,8 16 Back-up electric element is not included. To be ordered seperately at capacity required.

3 Floor standing single coil DHW storage tanks the smartest energy Material: teel sheet EN AI DC0-1 DCP Welding: Metal-Tungsten Inert Gas welding Protection coating: Protection Coating: High quality glass Enamel and magnesium anode protection Maximum working pressure: 10 bar Maximum water test pressure: 16 bar Maximum operating temperature:: 95 C Insulation: oft Polyurethane foam of 100mm thickness, vinyl external. Coil type exchanger: teel Tube Maximum exchanger test pressure: 25 bar Back up electric heater: Upon request Flange: Diameter Ø 170 mm For all Forced Circulation systems where olar DHW storage tanks enamelled, epoxy protected and combined are included, it is necessary: Installation of expansion vessel/s, ecurity pressure relief valve/s Cathodic protection anode for both primary and secondary circuits. PART Nr. BLLTGL750 BLLTGL1000 Total actual capacity Exchanger s actual capacity 15,20 19,20 Exchanger 1 inlet/outlet 1 1 Exchanger s area (m²) 3,02 2,39 Exchanger s diameter 1 1 Cold water inlet 1½ 1½ Hot water outlet 1½ 1½ Anode - Flange diameter 1 1 Output, th. fluid 90 C, water from 10 to 45 (kw/l/h) A Cold water inlet J Hot water outlet C Exchanger 1 inlet A Exchanger 1 outlet B Recirculation F Flange - manhole H Total height 1800 E Thermostat K Thermometer G Back-up heating element posit D Diameter Ø1000 Ø1000 Diagonal (mm) 2059,1 2236,1 Operation pressure (bars) Total weight ,15 39,5 Back-up electric element is not included. To be ordered seperately at capacity required. 17

4 Floor standing double coil DHW storage tanks pricelist Material: teel sheet EN AI DC0-1 DCP Welding: Metal-Tungsten Inert Gas welding Protection coating: High quality glass Enamel and protection anode Maximum working pressure: 10 bar Maximum water test pressure: 16 bar Maximum operating temperature: 95 C Insulation: Polyurethane foam of 50mm thickness, density 52kg/m³ Coil type exchanger: teel Tube Maximum exchanger test pressure: 25 bar Back up electric heater: Upon request Flange: Diameter Ø 170 mm For all Forced Circulation systems where olar DHW storage tanks enamelled, epoxy protected and combined are included, it is necessary: Installation of expansion vessel/s, ecurity pressure relief valve/s Cathodic protection anode for both primary and secondary circuits. N M K J E C B CI1 R CO1 CI2 CO2 A HWO CWI T D TR ER F G L O H Υλικό: Λαμαρίν Κόλληση: Αυτο Επικάλυψη Πρ ανoδίου Μέγιστη Πίεση Πίεση Δοκιμής Μέγιστη Θερμ Μόνωση: Αφρό Εναλλάκτης: Σ Πίεση Δοκιμής Ηλεκτρική Αντ Φλάντζα: Διάμ Σε όλα τα Boiler Λ είναι απαραίτητο Ανοδική Προστασ TyΠΟΣ 150L T.E. ΚωΔΙΚΟΣ BLLTGL150/2 Χωρητικότητα δοχείου liter PART Nr. BLLTGL150/2 BLLTGL200/2 Χωρητικότητα εναλλάκτη BLLTGL300/2 BLLTGL500/2 8 Total actual capacity Εναλλάκτης 1 είσοδος/έξοδος " Exchanger s actual capacity Επιφάνεια 11.4 εναλλάκτη m² ,53/0,78 Exchanger 1 & 2 inlet/outlet 1 1 Επανακυκλοφορία 1 1 3/4" Exchanger s 1 & 2 area (m²) 0,53/0,78 0,78/0,99 Είσοδος 0,78/0,99 κρύου νερού 1,20/1,92 1" Exchanger s diameter 3/4 3/4 Έξοδος ζεστού 3/4 νερού 1 1" Cold water inlet 1 1 Φλάντζα Ανόδιο 1 1 Ø170 & Ø140 Hot water outlet 1 1 Για σύνδεση 1 1 στο boiler με 80 C 1 και 10,4 νερού 15/60 C kw/l/h Anode - Flange diameter Ø170&Ø140 Ø170&Ø140 Ø170&Ø140 Ø170&Ø140 1 Output, th. fluid 90 C, water from 2 Output, th. fluid 90 C, water from Για σύνδεση 2 στο boiler με 80 C και ,6 16,4 19,2 13,1 νερού 15/60 C kw/l/h 13,1 A 14,4 Είσοδος κρύου νερού 22,9 25,8 235 N Έξοδος ζεστού νερού 880 A Cold water inlet J Έξοδος εναλλάκτη N Hot water outlet A Έξοδος εναλλάκτη J Exchanger 1 inlet M Είσοδος εναλλάκτη A Exchanger 2 inlet C Είσοδος εναλλάκτη M Exchanger 1 inlet K Ανακυκλοφορία C Exchanger 2 inlet H Συνολικό ύψος K Recirculation E Αισθητήρας H Total height G Υποδοχή ηλεκτρικής 1620 αντίστασης E Temp. sensor B Αισθητήρας G Back-up heating element posit L Θερμοστάτης B Temp. sensor O Θερμόμετρο L Thermostat D Διάμετρος Ø560 O Thermometer Διαγώνιος 1200 (mm) F Flange - manhole F Φλάντζα καθαρισμού D Diameter Ø560 Ø600 Πίεση λειτουργίας Ø630 / bar Ø Βάρος kg 70 Operation pressure (bars) Total weight Back-up electric element is not included. To be ordered seperately at capacity required.

5 Floor standing double coil DHW storage tanks the smartest energy Material: teel sheet EN AI DC0-1 DCP Welding: Metal-Tungsten Inert Gas welding Protection coating: High quality glass Enamel and magnesium anode protection Maximum working pressure: 10 bar Maximum water test pressure: 16 bar Maximum operating temperature: 95 C Insulation: oft Polyurethane foam of 100mm thickness, vinyl external. Coil type exchanger: teel Tube Maximum exchanger test pressure: 25 bar Back up electric heater: Upon request Flange: Diameter Ø 170 mm M-N K J E C HWO CI1 CO1 CI2 B R CO2 A T CWI D F TR ER G L O H Υλικό: Λ Κόλληση Επικάλυ ανoδίου Μέγιστη Πίεση Δο Μέγιστη Μόνωση Εναλλάκ Πίεση Δο Ηλεκτρι Φλάντζα Σε όλα τα ματα είνα Ασφαλεία For all Forced Circulation systems where olar DHW storage tanks enamelled, epoxy protected and combined are included, TyΠΟΣ it is necessary: Installation of expansion vessel/s, ΚωΔΙΚΟΣ ecurity pressure relief valve/s Χωρητικότητα δοχείου liter Cathodic protection anode for both primary and secondary circuits. Χωρητικότητα εναλλάκτη PART Nr. BLLTGL750/2 Εναλλάκτης 1 είσοδος/έξοδος BLLTGL1000/2 Total actual capacity 747,10 Επιφάνεια εναλλάκτη m² 865,40 Exchanger s actual capacity 23,80 Επανακυκλοφορία 31,70 Exchanger 1 & 2 inlet/outlet 1 Είσοδος κρύου νερού 1 Exchanger s 1 & 2 area (m²) 1,35 / 2,39 Έξοδος ζεστού νερού 1,97 / 3,02 Exchanger s diameter 1 Φλάντζα Ανόδιο 1 Cold water inlet 1½ Για σύνδεση 1 στο boiler 1½ με 80 C και νερού 15/60 C kw/l/h Hot water outlet 1½ Για σύνδεση 2 στο boiler 1½ με 80 C και νερού 15/60 C kw/l/h Drainage 1 A Είσοδος κρύου νερού 1 Anode - Flange diameter Ø170 & Ø170 N Έξοδος ζεστού νερούø170 & Ø170 1 Output, th. fluid 90 C, water 27,20 J Έξοδος εναλλάκτη 1 37,10 from 10 to 45 (kw/l/h) 476,40 632,60 A Έξοδος εναλλάκτη 2 2 Output, th. fluid 90 C, water 30,15 38,5 M Είσοδος εναλλάκτη 1 from 10 to 45 (kw/l/h) C Είσοδος εναλλάκτη 2 A Cold water inlet K Ανακυκλοφορία N Hot water outlet J Exchanger 1 inlet 1135 H Συνολικό ύψος 1230 A Exchanger 2 inlet 305 E Αισθητήρας 280 M Exchanger 1 inlet 1435 G Υποδοχή ηλεκτρικής αντίστασης 1679 C Exchanger 2 inlet 995 B Αισθητήρας 1055 K Recirculation 1285 L Θερμοστάτης 1507 E Temp. sensor 1025 O Θερμόμετρο 1142,5 G Back-up heating element posit D Διάμετρος 1142,5 H Total height 1800 Διαγώνιος (mm) F Φλάντζα καθαρισμού L Thermostat Πίεση λειτουργίας / bar O Thermometer 1420 Βάρος kg 1725 Β Temp. sensor F Flange - manhole D Diameter Ø1000 Ø1000 Total weight Back-up electric element is not included. To be ordered seperately at capacity required. 19

6 pricelist 20 Floor standing single coil DHW storage tanks (large exchanger for heat pump applications) Floor standing DHW storage tanks with single or double extra long coil type heat exchangers for specialized applications. E.g. to use with heat pumps. Extra length means additional heat exchanging surface area. Range from 200 up to 500 litres. Custom manufacturing in larger capacities available upon request. Material: teel sheet EN AI DC0-1 DCP Welding: Metal-Tungsten Inert Gas welding Protection Coating: High quality glass Enamel and protection anode Maximum Working Pressure: 10 bar Maximum water test pressure: 15 bar Maximum operating temperature: 95 C Insulation: Polyurethane foam of 55mm thickness, density 52kg/m³ Coil type exchanger: teel Tube glass - enameled Maximum exchanger test pressure: 25 bar J N G HWO CI1 TyΠΟΣ C R C01 B CWI 630 ER DRN TR E F A K H Ha 200L Δ.Ε. Flange/s: ΚωΔΙΚΟΣ Diameter Ø 170 mm & Ø 170 mm BLLTGL200/ Back Συνολική up electric Χωρητικότητα Heater: δοχείου liter 200 Not Χωρητικότητα included (special εναλλάκτη el. element liter required available in 3,6kW 22,7 Εναλλάκτης 1 είσοδος/έξοδος 1.1/2" Επιφάνεια εναλλάκτη m² 2,6 Διατομή εναλλάκτη 1.1/4" R Επανακυκλοφορία 3/4" CWI Είσοδος κρύου νερού 1" HWO Έξοδος ζεστού νερού 1" Φλάντζα Ανόδιο Ø170 & Ø170 Για σύνδεση στο boiler με 80 C και νερό 15/60 C kw/l/h Για σύνδεση στο boiler με 80 C For all και Forced νερό Circulation 15/60 C systems kw/l/hwhere olar DHW 60 storage tanks enamelled, epoxy protected and B Είσοδος κρύου νερού Combined are included, it is necessary:installation 260 Lof expansion Έξοδος vessel/s, ζεστού security νερού pressure relief valve/s and cathodic protection anode for both 1545 primary J Είσοδος and secondary 1 εναλλάκτη circuits C Έξοδος 1 εναλλάκτη 305 G Ανακυκλοφορία 655 F Υ Κ Ε σ Μ Π Μ Μ τ Ε Π Η Φ Σ γ Δ ζ

7 the smartest energy PART Nr. BLLTGL200/1HP BLLTGL300/1HP BLLTGL500/1HP Total actual capacity Total actual capacity 22,7 31,5 36,1 Exchanger inlet. Οutlet 1¼ 1.1/2 1.1/2 1.1/2 Exchanger s area (m²) 2,6 3,6 4,2 Exchanger s diameter 1.1/4 1.1/4 1.1/4 R Recirculation 3/4 3/4 3/4 CWI Cold water inlet HWO Hot water outlet Anode - Flange diameter Ø170 & Ø170 Ø170 & Ø170 Ø170 & Ø140 Output, th. fluid 80 C, water from 15 to 60 (kw/l/h) B Cold water inlet L Hot water outlet J Exchanger 1 inlet C Exchanger 1 outlet G Recirculation F Flange - manhole H Total height J Thermostat K Thermometer A Drainage Ε Temp. sensor D Diameter Ø600 Ø630 Ø750 Diagonal (mm) Total weight Back-up electric element is not included. To be ordered seperately. 21

8 Floor standing double coil DHW storage tanks (large exchanger for heat pump applications) Floor standing DHW storage tanks with single or double extra long coil type heat exchangers for specialized applications. E.g. to use with heat pumps. Extra length means additional heat exchanging surface area. Range from 200 up to 500 litres. Custom manufacturing in larger capacities available upon request. J N G CI1 HWO C R C01 B CO2 CWI ER DRN CI2 TR E F A K H Ha Υλικ Κόλ Επικ Μέγ Πίεσ Μέγ Μόν Ενα Πίεσ Ηλε Φλά Σε ό είναι Ανοδ TyΠΟΣ Material: teel sheet EN AI DC0-1 DCP Welding: Metal-Tungsten Inert Gas welding Protection Coating: High quality glass Enamel and protection anode Maximum Working Pressure: 10 bar ΚωΔΙΚΟΣ Συνολική Χωρητικότητα δοχείου liter Χωρητικότητα εναλλάκτη (1.1/4") Εναλλάκτης 1 είσοδος/έξοδος (1.1/4") Επιφάνεια εναλλάκτη m² (1.1/4") Διατομή εναλλάκτη Χωρητικότητα εναλλάκτη (3/4") Flange/s: Diameter Ø 170 mm & Ø 170 mm Back up electric Heater: Not included (special el. element required available in 3,6kW price: 147) BL Maximum water test pressure: 15 bar Maximum operating temperature: 95 C Εναλλάκτης 2 είσοδος/έξοδος (3/4") Επιφάνεια εναλλάκτη m² (3/4") Διατομή εναλλάκτη pricelist 22 Insulation: Polyurethane foam of 55mm thickness, density 52kg/m³ Coil type exchanger: teel Tube glass - enameled Maximum exchanger test pressure: 25 bar R CWI HWO Επανακυκλοφορία Είσοδος κρύου νερού Έξοδος ζεστού νερού For all Forced Circulation systems where olar DHW storage tanks enamelled, epoxy protected and Combined are Φλάντζα included, it Ανόδιο is necessary:installation of expansion vessel/s, security pressure relief valve/s and cathodic protection anode for both primary and secondary circuits. Για σύνδεση στο boiler με 80 C και νερό 15/60 C kw/l/h Για σύνδεση στο boiler με 80 C και νερό 15/60 C kw/l/h

9 the smartest energy PART Nr. BLLTGL200/2HP BLLTGL300/2HP BLLTGL500/2HP Total actual capacity Exchanger s 1 actual capacity 22,7 31,5 36,1 Exchanger 1 inlet. Οutlet 1¼ 1.1/2 1.1/2 1.1/2 Exchanger s 1 area (m²) 2,6 3,6 4,2 Exchanger s 1 pipe diameter 1.1/4 1.1/4 1.1/4 Exchanger s 1 pipe capacity 5,85 10,8 12,7 Exchanger 1 inlet. Οutlet ¾ 3/4 3/4 3/4 Exchanger s 1 area (m²) 1,2 2,2 2,6 Exchanger s 1 pipe diameter 3/4 3/4 3/4 R Recirculation 3/4 3/4 3/4 CWI Cold water inlet HWO Hot water outlet Anode - Flange diameter Ø170 & Ø170 Ø170 & Ø170 Ø170 & Ø140 Output 2, th. fluid 80 C, water from 10 to 60 (kw/l/h) Output 1, th. fluid 80 C, water from 10 to 60 (kw/l/h) B Cold water inlet L Hot water outlet J Exchanger 1 inlet C Exchanger 1 outlet G Recirculation F Flange - manhole H Total height J Thermostat K Thermometer A Drainage Ε Temp. sensor D Diameter Ø600 Ø630 Ø750 Diagonal (mm) Total weight

10 pricelist The information provided in this document is intended for informational purposes only and is subject to change without notice. Information may be changed or updated without notice. Thermic Ltd may also make improvements and/or changes in the products, pricing at any time without notice. 24