PPA Metallized polypropylene film capacitor MKP - Snubber/pulse - High current
|
|
|
- Φόρκυς Ζάχος
- 7 χρόνια πριν
- Προβολές:
Transcript
1 Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and high pulse applications Dielectric Polypropylene Electrodes Vacuum deposited metal layers Coating UL 510 / CSA TIL I-26 polyester tape wrapping; UL 94 V-0 resin end fill. Flame retardant execution Construction Extended double side metallized carrier film with internal series connection and metallized film (refer to general technical information) Terminals Tinned copper wire (lead free) Degree of protection IP00 Installation Whatever position assuring correct heat dissipation. Arrangement of many components with surfaces in contact not admitted; suggested minimum distance between side by side elements 1/12 of the diameter size Reference standard IEC 61071, IEC 60068, RoHS compliant Climatic category 40/85/56 (IEC 60068/1), GPD (DIN40040) Operating temperature range (case) C Max. permissible ambient temperature +70 C (operation at rated power, current, voltage and natural cooling) Rated capacitance (Cr) 0,0047µF to 6,8µF. Refer to article table Capacitance tolerance (at 1kHz) ±10% (code=k), ±5% (code=j) and ±20% (code=m). Other tolerances upon request Capacitance temperature coefficient Refer to graphs in general technical information Long term stability (at 1 khz) Capacitance variation ±1% after a period of 2 years at standard environmental conditions Non recurrent surge voltage (Upk) 1100, 1300, 1550, 1750, 2200, 2600, 3300, 4000 Vdc Self inductance 1nH/mm of capacitor and leads length used for connection Maximum pulse rise time Refer to article table Maximum peak current (Ipeak) Refer to article table. Max. non repetitive Ipk = 1,5 x Ipeak Dissipation factor (DF), max. Tgδ x10-4, measured at 25±5 C, 1kHz Cr 0,047μF 0,047µF < Cr 1,0μF Cr > 1,0μF Insulation resistance (IR) s but need not exceed 30GΩ (typical value), after 1 minute of electrification at 100Vdc (25 ± 5 C) Test voltage between terminals (Ut) 1,6xUr (DC) applied for 10s / 2xUr (DC) applied for 2s, at 25±5 C Test voltage between terminals and case (Utc) 3kV 50 60Hz applied for 60s at 25±5 C Damp heat test (steady state) Test conditions: Temperature= +40±2 C Relative humidity=93±2% Test duration= 56 days Performance: Capacitance change ±2% DF change at 1kHz IR 50% of initial limit value Typical capacitance change versus operating time -3% after hours at Urms or after hours at Ur Life expectancy hours (Un); hours (Urms) Failure quota 300/10 9 component hours Resistance to soldering heat test Test conditions: Solder bath temperature= +260±5 C Dipping time (with heat screen)= 10±1s Performance: Capacitance change ±1% DF change at 1kHz IR 50% of initial limit value Rated voltage (Ur) 700, 850, 1000, 1200, 1500, 2000, 2500, 3000 Vdc Warning This specification must be completed with the data given in the General technical information chapter Ed.02 Rev
2 PPA article table (different values available upon request) ICEL Code , , ,5 13 PPA *G ,15 11,5 27 0, ,5 4,5 9,4 PPA *G ,22 13,5 27 0, ,1 PPA *G ,22 11,5 32 0, ,5 8 PPA *J ,33 15,5 27 0, ,5 7 5,4 PPA *G ,33 13,5 32 0, PPA *J , , ,7 PPA *J ,68 19, ,5 3,9 PPA *J , ,4 PPA *N , ,5 3,2 PPA *J ,5 3,9 PPA *N ,5 23,5 44 1, ,5 14 3,3 PPA *N , PPA *N , , ,9 PPA *N , , ,8 PPA *R ,2 23,5 57 1, ,2 PPA *S , , ,5 14 2,8 PPA *N , , ,5 PPA *R ,5 25,5 57 1, PPA *S , ,6 PPA *N , ,2 PPA *R ,5 57 1, ,6 PPA *S , , ,5 14 2,5 PPA *N , , ,1 PPA *R ,3 28,5 57 1, ,5 PPA *S ,5 53 1, ,8 PPA *R , ,1 PPA *S ,7 35,5 53 1, ,6 PPA *R ,7 33,5 57 1, ,9 PPA *S , , ,3 PPA *R ,6 36,5 57 1, ,6 PPA *S , , ,4 PPA *S ,068 9,5 27 0, ,6 3,5 13,9 PPA *G , , ,5 10,4 PPA *G , , ,5 PPA *J , , ,5 7,6 PPA *G , , ,6 PPA *J ,22 15,5 27 0, ,1 PPA *G , , ,5 6,6 PPA *J , , ,5 7,9 PPA *N , ,5 4,8 PPA *J , ,5 6,1 PPA *N ,47 19, ,5 4 PPA *J , ,5 5 PPA *N ,68 23, ,5 3,2 PPA *J , ,5 4,1 PPA *N , ,3 PPA *N ,5 27,5 44 1, ,8 PPA *N ,5 44 1, ,4 PPA *N , PPA *R , ,4 PPA *S Ed.02 Rev
3 ICEL Code , , ,3 PPA *N ,2 28,5 53 1, ,8 PPA *R ,2 27,5 57 1, ,2 PPA *S ,5 34,5 44 1, ,6 PPA *N , , ,5 14 2,2 PPA *R , , ,5 14 2,5 PPA *S , ,5 PPA *R , ,8 PPA *S , , ,5 14 2,4 PPA *R , , ,5 14 2,7 PPA *S ,5 53 1, ,3 PPA *R ,5 57 1, ,6 PPA *S ,7 39,5 57 1, ,5 14 2,4 PPA *S ,068 10,5 27 0, ,2 3,5 13,5 PPA *G ,1 12,5 27 0, ,5 9,9 PPA *G ,1 10,5 32 0, ,5 11 PPA *J , , ,3 PPA *G ,15 12,5 32 0, ,5 6 8,2 PPA *J ,22 15, ,5 5,9 PPA *J ,33 18, ,5 9,5 4,5 PPA *J , ,4 9 5,9 PPA *N , ,5 10,5 3,8 PPA *J , ,6 10,5 4,7 PPA *N ,68 21, ,4 10,5 4 PPA *N , ,2 PPA *N ,5 31,5 44 1, ,6 PPA *N ,5 27,5 53 1, ,5 14 3,2 PPA *R , , ,5 14 3,6 PPA *S ,5 53 1, ,9 PPA *R ,5 57 1, ,2 PPA *S , , ,7 PPA *R , , PPA *S ,5 53 1, ,4 PPA *R , ,6 PPA *S , , ,5 14 2,5 PPA *S , , ,2 3 16,9 PPA *G ,047 8,5 32 0, , PPA *J ,068 11,5 27 0, ,8 4 12,8 PPA *G , , ,6 3,5 14,3 PPA *J , , ,7 PPA *G , , ,7 PPA *J , , ,1 PPA *N , ,5 7,7 PPA *J , , PPA *N ,22 17, ,4 PPA *J , ,6 9 7,6 PPA *N , ,5 4,5 PPA *J , ,4 9,5 5,4 PPA *N , ,6 10,5 4,8 PPA *N ,68 24,5 44 1, ,4 13,5 3,9 PPA *N , ,4 PPA *N , PPA *R ,5 57 1, ,5 PPA *S ,2 32,5 44 1, PPA *N ,2 27,5 53 1, ,4 PPA *R , , ,8 PPA *S , , ,7 PPA *N , , PPA *R , , ,4 PPA *S ,5 53 1, ,6 PPA *R ,5 57 1, ,9 PPA *S , , ,5 PPA *R , , ,8 PPA *S , , ,3 PPA *R , , ,6 PPA *S , ,4 PPA *S Ed.02 Rev
4 ICEL Code ,033 10,5 27 0, PPA *G , , ,5 16,5 PPA *G , , ,5 12,4 PPA *G ,068 11,5 32 0, ,8 PPA *J , , ,5 9,6 PPA *J ,15 17, ,2 PPA *J , ,5 5,3 PPA *J , ,6 9 7 PPA *N , ,4 10,5 5,3 PPA *N , , ,6 13,5 4,3 PPA *N ,68 29,5 44 1, ,4 14 3,7 PPA *N , ,2 PPA *N ,5 53 1, ,7 PPA *R ,5 57 1, ,2 PPA *S ,2 33,5 53 1, ,4 PPA *R ,2 31,5 57 1, ,7 PPA *S , , ,5 14 2,9 PPA *R , , ,5 14 3,2 PPA *S , ,8 PPA *S , , ,2 2 37,5 PPA *G ,022 10,5 27 0, ,5 2,5 27,5 PPA *G , , ,5 33,5 PPA *J ,033 12,5 27 0, ,7 3,5 20,7 PPA *G , , ,5 23,8 PPA *J ,047 14,5 27 0, ,2 4,5 15 PPA *G , , ,5 16,8 PPA *J ,047 10,5 44 0, , PPA *N , ,5 11,8 PPA *J ,068 12,5 44 0, ,5 16,3 PPA *N , ,5 8,4 PPA *J ,1 14, ,4 PPA *N , ,6 PPA *J ,15 17, ,5 9 8,3 PPA *N , PPA *N ,33 25,5 44 1, ,5 12,5 4,7 PPA *N ,47 30,5 44 1, ,5 14 3,9 PPA *N , , ,2 13 5,4 PPA *R , , ,5 6 PPA *S , , ,6 PPA *N ,56 27,5 53 1, ,5 PPA *R ,56 26,5 57 1, PPA *S , , PPA *R , , ,5 PPA *S , ,3 PPA *R , ,7 PPA *S ,2 38,5 57 1, ,4 PPA *S ,010 9,5 27 0, ,5 52 PPA *G ,015 11,5 27 0, ,5 2,5 37 PPA *G ,022 13,5 27 0, , PPA *G , , ,2 2,5 31 PPA *J , , , PPA *G , , , PPA *J , , ,2 5 16,5 PPA *J ,068 18, ,8 6,5 11,5 PPA *J ,1 22, ,5 8 PPA *J ,1 17, ,5 PPA *N ,15 21, ,5 9 8 PPA *N ,22 25,5 44 1, ,5 5,9 PPA *N ,33 31,5 44 1, ,5 14 4,5 PPA *N ,33 26,5 53 1, ,5 13,5 5,4 PPA *R ,33 25,5 57 1, , PPA *S ,47 31,5 53 1, ,5 14 4,4 PPA *R , , ,7 14 4,9 PPA *S ,56 34,5 53 1, PPA *R ,56 32,5 57 1, ,5 PPA *S , , ,7 PPA *R , , ,1 PPA *S ,82 39,5 57 1, ,5 14 3,8 PPA *S Ed.02 Rev
5 ICEL Code , , , PPA *G , ,5 27 0, ,7 1,5 65 PPA *G ,0068 8,5 32 0, ,8 1,5 77 PPA *J ,01 12,5 27 0, , PPA *G , , ,5 PPA *J ,015 14,5 27 0, ,7 3 33,5 PPA *G , , ,5 3 38,5 PPA *J , , PPA *J , , PPA *J ,047 20, ,5 6,5 14 PPA *J , ,8 PPA *N , ,8 PPA *N , , ,4 PPA *N , , ,8 PPA *N , , ,2 PPA *N ,22 28,5 53 1, ,9 PPA *R , , ,5 14 6,5 PPA *S , , ,5 14 4,9 PPA *R , , ,7 14 5,4 PPA *S , , ,5 14 4,4 PPA *R ,39 35,5 57 1, ,2 14 4,9 PPA *S , , ,2 14 4,5 PPA *S Warning This specification must be completed with the data given in the General technical information chapter Ed.02 Rev
C4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
Applications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
B37631 K K 0 60
Multilayer Ceramic acitors High; X5R and X7R Chip Ordering code system B37631 K 7 5 K 6 Packaging 6 ^ cardboard tape, 18-mm reel 62 ^ blister tape, 18-mm reel Internal coding acitance tolerance K ^ ± %
Multilayer Chip Capacitors C0G/NP0/CH
Multilayer Chip Capacitors C0G/NP0/CH Features Good thermal stability High insulation resistance Low dissipation factor Low inductance Applications Resonant circuits Filter circuits Timing elements Coupling
NTC thermistors for temperature measurement
NTC thermistors for temperature measurement SMD NTC thermistors with nickel barrier termination, case size 0603 Series/Type: Date: June 2008 EPCOS AG 2008. Reproduction, publication and dissemination of
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Surface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
Specification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)
High CV-value Long Life > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life Optimized designs available on request RoHS Compliant application Basic design Smoothing, energy storage,
Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction
TS-HA/HB Series 105 C, 3000 hours Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature:
THICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Type 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
Metal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Aluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
Axial Film Capacitors Metallized Polyester and Polypropylene
Axial Film Capacitors Metallized Polyester and Polypropylene... your source for the Ultimate in Reliability 1 Table of Contents Part Numbering System 2 Dielectric Characteristics 3 AREM 5 AFEO 6 AFPX 7
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
FP series Anti-Bend (Soft termination) capacitor series
FP series Anti-Bend (Soft termination) capacitor series Features Applications» High performance to withstanding 5mm of substrate» For general digital circuit bending test guarantee» For power supply bypass
1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
E62-TAB AC Series Features
NEW! E62-TAB AC Series Features Perfect for non-sinusoidal voltages and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated
YJM-L Series Chip Varistor
Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:
![± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:](/thumbs/85/91419422.jpg "± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:")
TS-UP Series 85 C, 3000 hours Compact size for general purpose and industrial applications 2 and 3 pin versions available 20mm lengths for low profile applications RoHS Compliant Rated Working Voltage:
Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
E62 AC Series Features
E62 AC Features Perfect for non-sinusoidal s and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated overpressure
Aluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Interference Suppression Capacitor
MOLDED BOX CONSTRUCTION, SUPPRESSION CAPACITOR, RADIAL LEAD FEATURES UL, CSA, VDE, CQC, CE, ENEC APPROVALS X2 SAFETY CAP CLASSIFICATION FOR USE IN ACROSS-THE-LINE APPLICATIONS METALLIZED POLYPROPYLENE
MPPBD Series. Double Sided Metallized Polypropylene Film Capacitor Box type. Double Sided Metallized Polypropylene Film Capacitor - Box type Features
Double Sided Metallized Polypropylene Film Capacitor Box type Double Sided Metallized Polypropylene Film Capacitor Box type Features Double sided metallized polypropylene structure. Low loss and small
Metal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Summary of Specifications
Snap Mount Large High CV High Ripple 85 C Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life for the series is 2,000 hours
+85 C General Purpose Radial Lead Aluminum Electrolytic Capacitors
+85 C General Purpose Radial Lead Aluminum Electrolytic acitors Applications Filtering Coupling Bypass Features Standard case sizes RoHS compliant Multiple case sizes Lead free Operating Temperature Range
Multilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Aerovox Corp. Type H High Voltage AC & DC Capacitors. Film Capacitors for Power Electronics Applications. RoHS Compliant. Highlights.
H Aerovox Corp. Film Capacitors for Power Electronics Applications Specifications Outline Drawing Capacitance Range: AC Voltage Range: DC Voltage Range: Temperature Range: Capacitance Tolerance: Dissipation
NPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
LR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
NTC Thermistor:SCK Series
Features. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φmm:-40~+70
Metallized Polypropylene Film Capacitors PCPW 246 ( DC-link application )
CONSTRUCTION ㆍDielectric ㆍCase ㆍFilling ㆍTerminals : Metallized Polypropylene film with segmented pattern : PBT (UL94 V-0) : Epoxy resin (UL94 V-0) : Tinned copper wire (2-pin / 4-pin) FEATURE ㆍHigh capacitance
LR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Metalized Polyester Radial Leaded Film Capacitors
Metalized Polyester Radial eaded Film Capacitors uracap International, Inc P.O. Box 1579 Woodstock, Ontario N4 0A7 Canada Phone: (519) 539-4891 Fax: (519) 539-6684 http://www.duracap.com/ MPER% %Metallized%Polyester%/%Radial%eads%
LR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
Polymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
NTC Thermistor:SCK Series
Features. RoHS & HF compliant 2. Body size: Ф5mm ~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70
NTC Thermistor:TTC3 Series
Features. RoHS compliant 2. Halogen-Free(HF) series are available 3. Body size: Ф3mm 4. Radial lead resin coated 5. Operating temperature range: -40 ~+25 6. Wide resistance range 7. Cost effective 8. Agency
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. Characteristics. Leakage Current(MAX) I=Leakage Current(µA) C=Nominal Capacitance(µF) V=Rated Voltage(V)
SERIES 5 C Long Life. Low impedance. (Rated Voltage 6.3~V.DC) FEATURES Load Life : 5 C 4~hours. Low impedance at khz with selected materials. SPECIFICATIONS Items Operating Temperature Range Rated Voltage
PEH C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life
PEH 169 85 C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life APPLICATION BASIC DESIGN Smoothing, energy storage, or pulse operation in telecommunication
NTC Thermistor:TSM type
Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended
RF series Ultra High Q & Low ESR capacitor series
RF series Ultra High Q & Low ESR capacitor series FAITHFUL LINK Features Application» High Q and low ESR performance at high frequency» Telecommunication products & equipments:» Ultra low capacitance to
Thin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) Type EI Size Power Rating at 70
2013 REV 01 ELECTRONICS CAPACITORS. DC Applications Metallized Polypropylene Film Self Healing
2013 REV 01 POWER EECTRONICS CAPACITORS C Applications Metallized Polypropylene Film Healing OUR MISSION: POWER EECTRONICS AN SPECIA CAPACITORS M.V. PFC CAPACITORS AN BANKS IGHTING CAPACITORS MOTOR RUN
Power Electronics Capacitors Guide
Power Electronics Capacitors Guide Snubber Capacitors Conduction Cooled Power Capacitors DC-Link Capacitors Capacitors for Medical Instruments Ed:Sep.2013.Rev:0 DAL-K 1101208 Un 1100V DC 1200 μf ±10% -40/+85
Suitable for DC-DC Converters, Voltage Regulators, Decoupling Applications for Computer Motherboards, etc. Performance Characteristics
+105 C, Higher Ripple, Lower than ULG Features Higher Ripple, Lower than ULG Wide Temperature Range RoHS Compliant Applications Suitable for DC-DC Converters, Voltage Regulators, Decoupling Applications
SIOV Metal Oxide Varistors Leaded Varistors (StandarD Series)
Leaded Varistors () Disk varistors StandarD series, dimensions Construction Round varistor element, leaded Coating: epoxy resin, flame-retardant to UL 94 V-0 Terminals: tinned copper wire Features Wide
Surface Mount Multilayer Inductor
FETURES 0603, 0805, 0806 ND 1008 CSE SIZES HIGH CURRENT ND LOW RESISTNCE NEW "S" VERSION FOR INCRESED STURTION CURRENT UGRDED "H" VERSION FOR HIGHEST CURRENT REFLOW SOLDERING LICBLE CKGE FOR UTOMTIC ICKLCE
NTC Thermistor:SCK Series
Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:
Thick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MW) THICK FILM ON ALUMINA SUSTRATE,
HIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
RSDW08 & RDDW08 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (Typ.) CAPACITOR LOAD (MAX.) RSDW08F-03 344mA 3.3V 2000mA 80% 2000μF RSDW08F-05
NTIC Series. Limiting Inrush Current. NTC Power Thermistor for FEATURES PART NUMBER SYSTEM UL E Ф5~Ф15mm NTIC M S.
FEATURES UL E223037 Body size: Ф5mm ~ Ф30mm Radial lead resin coated High power rating Wide resistance range Cost effective Operating temperature range: Ф5mm: -40ºC~150ºC Ф8~Ф10mm: -40ºC~170ºC Ф13~Ф30mm:
Type CGS High-Cap Screw Terminal Aluminum Electrolytic Capacitor
High CV, Screw Terminal Capacitors Specifications Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature: Ripple Current Multipliers: Type CGS screw terminal, aluminum electrolytic
Radial Polyester Film Capacitor (Inductive) PEF Series. Features. Applications. Specification
Radial Polyester Film Capacitor (Inductive) Features Inductive construction with radial leads High moisture resistance and good solderability Available on taping packing for automatic assembly RoHS compliant
Metal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
NTC Thermistor:SCK Series
Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:
SMD Transient Voltage Suppressors
SMD Transient Suppressors Feature Full range from 0 to 22 series. form 4 to 60V RMS ; 5.5 to 85Vdc High surge current ability Bidirectional clamping, high energy Fast response time
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Metal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
NTC Thermistor:SCK Series
Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:
RC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
MEBS Series. Metallized Polyester Film Capacitor, MiniBox P=5.0mm/Stacked. Features. Typical Applications. Specification
Metallized Polyester Film Capacitor MiniBox P=5.0mm/Stacked Metallized Polyester Film Capacitor, MiniBox P=5.0mm/Stacked Features Metallized polyester film, stacked construction Plastic case (UL94 V0),
NTC Thermistor:SCK Series
NTC Thermistor:SCK Series Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating
Precision Metal Film Fixed Resistor Axial Leaded
Features EIA standard colour-coding Non-Flame type available Low noise and voltage coefficient Low temperature coefficient range Wide precision range in small package Too low or too high ohmic value can
Thick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MΩ) THICK FILM ON ALUMINA SUSTRATE,
15W DIN Rail Type DC-DC Converter. DDR-15 series. File Name:DDR-15-SPEC
DIN Rail Type DC-DC Converter ± : DIN Rail Type DC-DC Converter SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC (Note 5) OTHERS DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE
Power Inductor LVS Series
RoHS Compliant Halogen Free REACH Compliant Part Numbering LVS 6645 L - 1R M - AU Series Name Dimensions Code Inductance Internal Code (mm) (uh) Tolerance 4412 4.x4.x1.2 L Low DCR R47.47 M ±% 4418 4.x4.x1.8
RJJ Miniature Aluminum Electrolytic Capacitors RJJ. Series RJJ High-Frequency, Low Impedance, Standard Type. Radial Type
352 Elna Corrections 80-95 /6/98 :55 AM Page Miniature Aluminum Electrolytic Capacitors Series High-Frequency, Low Impedance, Standard Type For high reliability applications, Environmentally safe. High-frequency,
SPECIFICATION FOR APPROVAL
信昌電子陶瓷股份有限公司 Prosperity Dielectrics Co., Ltd. No. 148, Chang-An Road, Sec 1,Lu-Tsu Shiang, Taoyuan, Taiwan, ROC. Tel.:886-3-3224471 Fax:886-3-3212216 SPECIFICATION FOR APPROVAL DATE: CUSTOMER: LIMITED
Thin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) RoHS Compliant includes all homogeneous
15W DIN Rail Type DC-DC Converter. DDR-15 s e r i e s. File Name:DDR-15-SPEC
DIN Rail Type DC-DC Converter ± : DIN Rail Type DC-DC Converter SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC (Note 5) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER
Carbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
SPBW06 & DPBW06 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (TYP.) CAPACITOR LOAD (MAX.) SPBW06F-03 310mA 3.3V 0 ~ 1500mA 81% 4700μF SPBW06F-05
Unshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
CERAMIC DISC CAPACITOR Class II 50V,100V,500V,1KV,2KV,3KV, Hi-K Type
Features: Capacitance has non-linear temperature coefficient Large in small size Epoxy Coating for 2KV and 3KV parts (equivalent to UL94V-0 standards) RoHS Compliance Halogen free products are available
CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
VAR Series Zinc Oxide Varistor
FEATURES Round Zinc Oxide, leaded Coating: epoxy resin, flame-retardant material Operating Temperature Range: -40 ~+105 Wide operating voltage Approvals: CQ C, UL, VDE RoHS 201165EU; REACH Compliant High
CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Polymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
NKT NTC Thermistor. Negative Temperature Coefficient Thermistor FEATURES
FEATURES Large, strong capacity of suppression of inrush current Big material (B value), small residual Small size, Long life, high reliability and fast response APPLICATIONS Switching -supply, switch,
SPECIFICATION FOR APPROVAL
信昌電子陶瓷股份有限公司 Prosperity Dielectrics Co., Ltd. No. 148, Chang-An Road, Sec 1,Lu-Tsu Shiang, Taoyuan, Taiwan, ROC. Tel.:886-3-3224471 Fax:886-3-3212216 SPECIFICATION FOR APPROVAL DATE: CUSTOMER: LIMITED
Polymer PTC Resettable Fuse: KMC Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. IA size: 0603, 0805, 1206, 1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small
Ceramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
+85 C General Purpose Miniature Aluminum Capacitors
+85 C General Purpose Miniature Aluminum Capacitors Features- Increased CV Efficiency Non Polar Design Available (Special Order) General Specifications- Operating Temperature: -40 to +85 C Voltage Range:
Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
High Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
NTC Thermistor:SCK Series
Features. RoHS & Halogen Free (HF) compliant 2. Body size: Ф5mm ~ Ф30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Ф5mm:
SMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)
Marking Outline: Low DCR, high rated current. Magnetic shielded structure Lead free product, RoHS compliant. RoHS Carrier tape packing, suitable for SMT process. SMT Widely used in buck converter, laptop,
DATA SHEET Surface mount NTC thermistors. BCcomponents
DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped
Terminal Contact UL Insulation Designation (provided with) style form system approval Flux tight
eatures A miniature PCB Power Relay. form A contact configuration with quick terminal type. 5KV dielectric strength, K surge voltage between coils to contact. Ideal for high rating Home Appliances of heating
Bulletin 1489 UL489 Circuit Breakers
Bulletin 489 UL489 Circuit Breakers Tech Data 489-A Standard AC Circuit Breaker 489-D DC Circuit Breaker 489-A, AC Circuit Breakers 489-D, DC Circuit Breakers Bulletin 489-A Industrial Circuit Breaker
Disk Varistors, S Standard
Disk Varistors, S Standard Construction Round varistor element Coating: epoxy resin, flame-retardant to UL 94 V-0 Terminals: tinned copper wire New features New high-energy varistors S14/S20 E2 PSpice