Packaging Chip Resistors
|
|
- Τίτος Ζαφειρόπουλος
- 6 χρόνια πριν
- Προβολές:
Transcript
1 Packaging Chip esistors Chip esistor eel Nominal Dimensions Inches () Packaging: Chips Per EI Standard S-481 inches B C D E F G H J ± ± ± ± ± ± / / ± ± ± ± 0.1 K1 K2 L M GC 1/16, MC 1/16, NC 16, F 16, CS 1/ max 1.1 max ± ± ± ± 0.2 GC 1/10, MC 1/10, HMC 1/10, FC 1/10, F 20, NC 20, CS 1/ max 1.1 max ± ± ± ± 0.2 GC 1/8, MC 1/8, HMC 1/8, FC 1/8, F 32, NC 32, CS 1/ max 1.1 max 0.08 ± ± ± ± 0.05 MC 1/4, FC 1/ ± ± ± ± 0.2 MC 1/2, CS ± ± ± ± 0.2 MC 1, CS ± ± ± ± 0.2 Notes: 1. Dimensions are 0.47 ± 0.01 (12.0 ± 0.1) for 1/2 and 1 Watt. 2. per (7") reel 1/16, 1/10, & 1/8 Watt. per (7") reel 1/4, 1/2 & 1 Watt. vailable Options piece (13") reels. 3. taping standard per (7") reel on 1/4, 1/2 & 1 Watt. 4. taping available per (7") reel on MC 1/4 Watt. Packaging: MC 1/16S, GC 1/16S, NC 10, and MC 1/20 Chips (2 Pitch) inches B C D E / / / / ± ± ± ± ± ± 0.10 F G J K L ± ± ± ± / /-0.00 Standard ape Packaging 2 Pitch per reel eel diameter 7.0 (178) eel width (8.0) / / max 0.50 max oll Free: (888) SEI-SEIS marketing@seielect.com 62
2 Packaging Chip esistors Packaging for Chip esistors Chip esistors Options Description Package Quantity MC 1/20, MC 1/16S, GC 1/16S, NC 10, CS 1/8 7" reel - paper taping MC 1/16, MC 1/10, MC 1/8 G 7" reel - paper taping 10" reel - paper taping HMC 1/16, HMC 1/10, HMC 1/8, GC 1/16, GC 1/10, GC 1/8, CS 1/4 7" reel - paper taping NC 16, NC 20, NC 32, F 16, F 20, F 32, FC 1/16, FC 1/10, FC 1/8, CS 1/2 I 7" reel - paper taping 7" reel - paper taping MC 1/4, MC 1/2, MC 1, FC 1/4 7" reel - emboss taping CS 1, CSN 1, CS 2, CSF 2, CSL 2, CSN 2 I 7" reel - emboss taping 7" reel - emboss taping Chip rrays Options Description Package Quantity V 10-2D, F 10-2D, V 10-4D, F 10-4D V 16-2D, V 16-4D, C 16-4D V 32-4D, V 32-8, V 32-8N, V 64-8N, V 64-8, C 32-4D, C 40-8M, C 64-8N, C 64-8, V 16-8D 7" reel - paper taping 7" reel - paper taping 7" reel - emboss taping oll Free: (888) SEI-SEIS marketing@seielect.com 63
3 Packaging Chip esistors PCKING SPECIFICIONS: Inch () FEUES V/ F 10-2D V/ F 10-4D V 16-2D V 16-4D & 32-8 V 32-4D - Pocket Width.046±.004 (1.17±0.10).051±.008 (1.30±0.20).071±.004 (1.80±0.10).079±.008 (2.00±0.20).134±.004 (3.40±0.10) B - Pocket Length.046±.004 (1.17±0.10).091 ±.008 (2.30±0.20).071±.004 (1.80±0.10).142±.008 (3.60±0.20).220±.004 (5.60±0.10) P - Pocket Spacing.079±.002 (2.00±0.05).079±.002 (2.00±0.05).157±.004 (4.00±0.10).157±.004 (4.00±0.10).157±.004 (4.00±0.10) C - Pin Spacing.157±.004 (4.00±0.10).157±.004 (4.00±0.10).157±.004 (4.00±0.10).157±.004 (4.00±0.10).157±.004 (4.00±0.10) D - Pin Diameter /-0 ( /-0) /-0 ( /-0) /-0 ( /-0) /-0 ( /-0) /-0 (1.+±0.1/-0) F - Pin-Pocket C/L.138±.002 (3.50±0.05).138±.002 (3.50±0.05).138±.002 (3.50±0.05).138±.002 (3.50±0.05).217±.002 (5.50±0.05) W - Strip Width.315±.008 (8.00±0.20).315±.008 (8.00±0.20).315±.008 (8.00±0.20).315±.008 (8.00±0.20).472±.008 (12.00±0.20) 1 - Strip hickness.04 max. (1.0 max.).04 max. (1.0 max.).02 max. (0.5 max.).04 max. (1.0 max.).010±.002 (0.25±0.05) 2 - otal hickness.06 max. (1.4 max.).06 max. (1.4 max.).04 max. (1.0 max.).06 max. (1.4 max.).043 max. (1.10 max.) Material Pieces/eel H - eel Diameter 7.00±.08 (178.0±2.0) 7.00±.08 (178.0±2.0) 7.00±.08 (178.0±2.0) ( ) 7.1+0/-.12 (180+0/-3.0) J - Hub Diameter 2.0 (50) approx. 2.0 (50) approx. 2.0 (50) approx. 2.0 (50) approx. 2.4±.04/-0 (60±1.0/-0) K - Hole Diameter.51±.04 (13.0±1.0).51±.04 (13.0±1.0).51±.04 (13.0±1.0).51 ±.04 (13.0±1.0).51±.01 (13.0±0.2) L - Key Diameter.83±.04 (21.0±1.0).83±.04 (21.0±1.0).83±.04 (21.0±1.0).83±.04 (21.0±1.0).83±.03 (21.0±0.8) M - Key Width.08±.04 (2.0±1.0).08±.04 (2.0±1.0).08±.04 (2.0±1.0).08±.04 (2.0±1.0).08±.02 (2.0±0.5) S - eel Inside Width.53±.08 (13.5±2.0).53±.08 (13.5±2.0).53±.08 (13.5±2.0).53±.08 (13.5±2.0).35±.01 (9.0±0.3) - Side hickness.03±.01 (0.8±0.2).03±.01 (0.8±0.2).03±.01 (0.8±0.2).03±.01 (0.8±0.2) - U - eel Outside Width ±.04 (11.4±1.0) oll Free: (888) SEI-SEIS marketing@seielect.com 64
4 Packaging Chip esistors PCKING SPECIFICIONS: Inch () FEUES C 16-4D C 32-4D C 40-8M C 64-8N/ - Pocket Width.079±.008 (2.00±0.20).138±.004 (3.50±0.10).098±.004 (2.50±0.10).138±.004 (3.50±0.10) B - Pocket Length.142±.008 (3.60±0.20).224±.004 (5.70±0.10).173±.004 (4.40±0.10).266±.004 (6.75±0.10) P - Pocket Spacing.157±.004 (4.00±0.010).157±.004 (4.00±0.10).157±.004 (4.00±0.10).157±.004 (4.00±0.10) C - Pin Spacing.157±.004 (4.00±0.10).157±.004 (4.00±0.10).157±.004 (4.00±0.10).157±.004 (4.00±0.10) D - Pin Diameter /-0 ( /-0) /-0 (1.+0.1/-0) /-0 ( /-0) /-0 ( /-0) F - Pin-to-Pocket Center.138±.002 (3.50±0.05).217±.002 (5.50±0.05).217±.002 (5.50±0.05).217±.002 (5.50±0.05) W - Strip Width.315±.008 (8.00±0.20).472±.008 (12.00±0.20).472±.008 (12.00±0.20).472±.008 (12.00±0.20) 1 - Strip hickness.02 max. (0.5 max.).010±.002 (0.25±0.05).010±.002 (0.25±0.05).010±.002 (0.25±0.05) 2 - otal hickness.04 max. (1.0 max.).043 max. (1.10 max.).043 max. (1.10 max.).043 max. (1.10 max.) Material Pieces/eel H - eel Diameter 7.00±.08 (178.0±2.0) 7.09±0/-.12 (180.0±0/-3.0) 7.09±0/-.12 (180.0±0/-3.0) /-.12 ( /-3.0) J - Hub Diameter 2.0 (50) approx. 2.4±.04/-0 (60±1.0/-0) 2.4±.04/-0 (60±1.0/-0) /-0 (60+1.0/-0) K - Hole Diameter.51±.04 (13.0±1.0).51±.01 (13.0±0.2).51 ±.01 (13.0±0.2).51 ±.01 (13.0±0.2) L - Key Diameter.83±.04 (21.0±1.0).83±.03 (21.0±0.8).83±.03 (21.0±0.8).83±.03 (21.0±0.8) M - Key Width.08±.04 (2.0±1.0).08±.02 (2.0±0.5).08±.02 (2.0±0.5).08±.02 (2.0±0.5) S - eel Inside Width.53±.08 (13.5±2.0).35±.01 (9.0±0.3).35±.01 (9.0±0.3).35±.01 (9.0±0.3) - eel Side hickness.03±.01 (0.8±0.2) U - eel Outside Width -.45±.04 (11.4±1.0).45±.04 (11.4±1.0).45±.04 (11.4±1.0) oll Free: (888) SEI-SEIS marketing@seielect.com 65
5 Packaging xial Leaded esistors Packaging & Identification Variations Lead ape Specifications: eeled in accordance with S-296-E inches Dimensions max. B max. C D E ape Products Class I See Note / See Note / / / ll except below Class II See Note / See Note / / / S 2, S 3, SM 3, SM 5, FN 2, WF 2, WF 3 Class III See Note / See Note / / / S 2 and SM 5 capable Note 1. he dimension shall be governed by the overall length of the taped component. he distance between flanges shall be inches (1.50 ) to 0.315inches (8.00 ) greater than the overall component. Note 2. Component Diameter Component Pitch Note to to to to 10.0 S 5, M, KL, CB, VM, VE, NSP, available bulk only ± ± ± ± 0.5 oll Free: (888) SEI-SEIS marketing@seielect.com 66
6 Packaging xial Leaded esistors Packaging for xial Leaded esistors Leaded esistors Code Description Package Quantity N 1/8, NM 1/4, N 1/4, N 1/2, NM 1/2, CF 1/8, CFM 1/4, CF 1/4, CFM 1/2, CF 1/2 eel o UP 1/4, UP 1/2, C 1/4, C 1/2, CD 1/8, CD 1/4, CD 1/2 eel SM 1/2 eel o S 1/2, SM 1, SPF 1/2, SPL 1/2, SPF 1, SPL 1 eel o S 1, SM 2, CF 1 eel o S 2, SM 3, SPF 2, SPL 2, CF 2 eel o S 3, SM 5, SPF 3, SPL 3 eel o S 5 NSP (all), LC (all) WF (all) eel JW 50, JW 55, JW 60 eel o JW 80 eel o FN 1/4, S 1/4, SP 1/4 eel o FN 1/2, FN 1, S 1/2, SP 1/2, S 1, SP 1 eel o FN 2 eel o oll Free: (888) SEI-SEIS marketing@seielect.com 67
7 Packaging adial Leaded esistors adial Lead aping Specification Pana-Sert Carbon Film & Metal Film esistors (1/4W Body Size) Description Symbol PN-SE Inches Description Symbol PN-SE Inches esistor body diameter D ± ± 0.2 Hold-down tape position W max. esistor body length ± ± 0.5 Height to bottom of resistor H ± ± esistor pitch 1 P ± ± 1.0 Height to lead clinch H ± ± 0.5 Sprocket-hole pitch 1 P ± ± 0.3 Lead protrusion I max. Sprocket-hole center to lead center P ± ± 0.7 Sprocket-hole diameter D ± ± 0.3 Sprocket-hole center to resistor ± center 1 P ± 1.3 hickness (chipboard and tape) ± ± 0.2 esistor lead spacing F ± ± 1.0 Cutout length 1 L max. esistor alignment h 0.0 ± [0 ± 5 ] 0 ± 2.0 [0 ± 5 ] Height of resistor H max. Chipboard width 1 W ± 0.039/ ± 1.0/-0.5 Height of bending C ± ± 0.5 Hold-down tape width W min. esistor alignment h ± [0 ± 5 ] 0 ± 2.0 [0 ± 5 ] Sprocket-hole position W ± 0.030/ ± 0.75/-0.5 Note 1. Cumulative pitch tolerances not to exceed ±0.039 (±1.0) over 20 consecutive pitches. pieces per reel. Note 2. Product only available from 10Ω to 1 Mg in 5% or 1% tolerances. oll Free: (888) SEI-SEIS marketing@seielect.com 68
VAR Series Zinc Oxide Varistor
FEATURES Round Zinc Oxide, leaded Coating: epoxy resin, flame-retardant material Operating Temperature Range: -40 ~+105 Wide operating voltage Approvals: CQ C, UL, VDE RoHS 201165EU; REACH Compliant High
Διαβάστε περισσότεραXKT. Metal Oxide Varistor FEATURES
FEATURES Operating Temperature Range: -40 ~+105 Body Diameters Range From 5D to 20D Wide Operating from 18V to 1800V Full compliance with RoSH and REH DIMENSION L:16mm min SIZE D MAX H MAX d+-0.05 E c
Διαβάστε περισσότεραNKT NTC Thermistor. Negative Temperature Coefficient Thermistor FEATURES
FEATURES Large, strong capacity of suppression of inrush current Big material (B value), small residual Small size, Long life, high reliability and fast response APPLICATIONS Switching -supply, switch,
Διαβάστε περισσότεραPolymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
Διαβάστε περισσότεραCeramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Διαβάστε περισσότεραTSV. Suntan ZINC OXIDE VARISTOR. Operating Temperature Range: -40 ~+85 DIMENSION. T Thickness(max.) L:16mm min
Operating Temperature Range: -40 ~+85 DIMENSION L:16mm min SIZE D MAX H MAX d+-0.05 E c max D05 8 11 0.5 5±0.8 2.5 D07 10 12.5 0.5 5±0.8 2.5 D10 13.5 16 0.7 7.5±0.8 2.5 D14 17.5 20 0.7 7.5±0.8 2.5 D20
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Διαβάστε περισσότεραAPPLICATIONS TECHNOLOGY. Leaded Discs N.03 N.06 N.09
NC Disc hermistors ND 03/06/09 NE 03/06/09 NV 06/09 APPLICAIONS ND or NE: Commerical, Industrial and Automotive Applications AEC-Q200 Qualified NV: Professional Applicationsl Alarm and temperature measurement
Διαβάστε περισσότεραCurrent Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
Διαβάστε περισσότερα4. Construction. 5. Dimensions Unit mm
1. Scope This specification applies to all sizes of rectangular-type fixed chip resistors with Ni/Cr as material. 2. Features Tolerance from 0.01%1% Thin film & Ni/Cr Resistor TCR from 5ppm 50ppm for thin
Διαβάστε περισσότεραMAX-QUALITY ELECTRIC CO; LTD Thin Film Precision Chip Resistors. Data Sheet
Data Sheet Customer: Product: Size: Current Sensing Chip Resistor CS Series 0201/0402/0603/0805/1206/1010/2010/2512 1225/3720/7520 Issued Date: Edition : 12-Nov-10 REV.C5 Current Sensing Chip Resistor
Διαβάστε περισσότεραOperating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
Διαβάστε περισσότεραAT Surface Mount Package SOT-363 (SC-70) I I Y. Pin Connections B 1 C 1 E 1 E 2 C 2 B , 7:56 PM
AT-3263 Surface Mount Package SOT-363 (SC-7) I I Y Pin Connections B 1 C 1 E 1 E 2 C 2 B 2 Page 1 21.4., 7:6 PM Absolute Maximum Ratings [1] Absolute Thermal Resistance [2] : Symbol Parameter Units Maximum
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
Διαβάστε περισσότεραCeramic PTC Thermistor: PPL Series
Features 1. RoHS compliant 2. PPD series are disc and PPL are leaded type 3. rating:12v ac ~1000V ac 4. range:0.3ω~10kω 5. Stable over a long time 6. Operating temperature range:0 ~ +60 C (V=Vmax) -25
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
Διαβάστε περισσότεραNTC Thermistor:TTC3 Series
Features. RoHS compliant 2. Halogen-Free(HF) series are available 3. Body size: Ф3mm 4. Radial lead resin coated 5. Operating temperature range: -40 ~+25 6. Wide resistance range 7. Cost effective 8. Agency
Διαβάστε περισσότεραMultilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Διαβάστε περισσότερα1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Διαβάστε περισσότεραThin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Διαβάστε περισσότεραPolymer PTC Resettable Fuse: KRT Series
Polymer PT Resettable use: KRT Series Radial Lead Type or Telecom pplications eatures 1. RoHS & Halogen-ree (H) compliant 2. Hold current ratings from 0.08 to 0.18 3. High operating voltage rating :100Vdc/250Vdc
Διαβάστε περισσότεραThin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to ±5PPM/C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
Διαβάστε περισσότεραCSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Διαβάστε περισσότεραData sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Διαβάστε περισσότεραThin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to PPM/ C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
Διαβάστε περισσότεραSMD - Resistors. TThin Film Precision Chip Resistor - SMDT Series. Product : Size: 0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product : TThin Film Precision Chip Resistor - SMDT Series Size: 0201/0402/0603/0805/1206/1210/2010/2512 official distributor of 1. Features -Advanced thin film technology -Very tight tolerance down to
Διαβάστε περισσότεραCurrent Sensing Chip Resistor
Features -3 atts power rating in 1 att size, 1225 package -Low CR of ±100 PPM/ C -Resistance values from 1m to 1 ohm -High purity alumina substrate for high power dissipation -Long side terminations with
Διαβάστε περισσότεραThin Film Precision Chip Resistor-AR Series
hin Film Precision Chip Resistor-AR Series Construction L D1 3 4 5 6 D2 9 8 7 1 2 1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat
Διαβάστε περισσότεραMetal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Viking s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Viking s design provides high, excellent Q, and superior temperature stability. This highly stable
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Διαβάστε περισσότεραNTC Thermistor:TSM type
Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended
Διαβάστε περισσότεραLR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Διαβάστε περισσότεραXA CONNECTOR. 1Certified LR R Disconnectable Crimp style connectors. Features. Specifications. Standards. 2.5mm.
Crimp mm (.09") pitch X CONNECTOR Disconnectable Crimp style connectors Emboss Tape Radial Tape Features Locking device The housing has a locking device to securely hold the header, preventing accidental
Διαβάστε περισσότεραRC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
Διαβάστε περισσότεραCSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
Διαβάστε περισσότεραINPAQ Global RF/Component Solutions
MCB & MHC W Series Specification Product Name Series Multilayer Chip Ferrite Bead MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516 MCB and MHC Series Chip Ferrite Bead for Automotive Applications
Διαβάστε περισσότεραShunts & Multiple Shunts. Stamped Contact DIP IC Sockets. PLCC Sockets. Jumpers. DDR DIMM Sockets SOCKETS. System CS - Technical Specifications
System - Technical Specifications Shunts & Multiple Shunts Stamped Contact DIP IC Sockets ~ ~ PLCC Sockets ~ Jumpers ~ DDR DIMM Sockets Electrical: Current/Voltage rating: 0.5A/25VAC for Single Type 0.3A/25VAC
Διαβάστε περισσότεραCurrent Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
Διαβάστε περισσότεραHigh Current Chip Ferrite Bead MHC Series
High Current Chip Ferrite Bead MHC Series Features Combination of high frequency noise suppression with capability of handing high current. The current rating up to 6 Amps with low DC. Applications High
Διαβάστε περισσότεραSMD - Resistors. Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512/ 1225/0612 official distributor of 1. Scope Thick Film Chip Resistor-SMDC Series -This specification applies
Διαβάστε περισσότεραSERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES) (8) 95-8365 venkel.com Features: RoHS Compliant and Halogen Free Good Q values High SRF range: 1nH to 47uH Tolerance: ±.2nH, ±.3nH, ±2%, ±5%, ±1% High
Διαβάστε περισσότεραNo Item Code Description Series Reference (1) Meritek Series CRA Thick Film Chip Resistor AEC-Q200 Qualified Type
Qualified FEATURE Excellent Mechanical Strength and Electrical Stability Ideal for Pick and Place Machinery Stable High Frequency Characteristics Miniature, High Board Density Equivalent Specification
Διαβάστε περισσότεραThick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Thick Film Chip Resistor-SMDC Series Size: 01005/0201/0402/0603/0805/1206/1210/2010/2512 official distributor of Thick Film Chip Resistor-SMDC Series 1. Scope -This specification applies to all
Διαβάστε περισσότεραTHICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Διαβάστε περισσότεραThick Film Chip Resistors
FEATURES EIA STANDARD SIZING 01005(1/32), 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES
Διαβάστε περισσότεραTrimmable Thick Film Chip Resistor
rimmable hick ilm Chip Resistor R Series rimmable hick ilm Chip Resistor Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. eatures
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Διαβάστε περισσότεραData sheet Thin Film Chip Inductor AL Series
Data sheet Thin Film Chip Inductor AL Series Scope - 0201 and 0402 and 0603 series inductor is a photo lithographically etched single layer ceramic chip. This design provides high SRF, excellent Q, and
Διαβάστε περισσότεραTHICK FILM CHIP RESISTOR" CAL-CHIP ELECTRONICS INC."
THICK FILM CHIP RESISTOR CAL-CHIP ELECTRONICS INC. CAL-CHIP SERIES: RM SERIES 1 2 3 INTRODUCTION SCOPE Applies to all sizes of rectangular-type fixed chip resistors with Ruthenium base as material. FEATURES
Διαβάστε περισσότεραNegative Temperature Coefficient Thermistor (NTC) Data Sheet
Negative Thermistor (NTC Series) Negative Thermistor (NTC) Data Sheet Feature Wide operating voltage range from φ5 to φ20 Style φ5 Φ7/φ9/φ11 Φ13/φ15/φ20-40 ~155-40 ~175-40 ~200 Storage : 15 ~35 Applications
Διαβάστε περισσότεραSMD Multilayer Ferrite Chip Beads. Multilayer Ferrite Chip Beads. Product Identification. Dimension Conversion
SMD Multilayer Ferrite Chip Beads Multilayer Ferrite Chip Beads Chilisin offers a wide range of multi-layered ferrite chip beads with various sizes, frequency characteristics, and impedance values for
Διαβάστε περισσότεραMCB and MHC Series Chip Ferrite Bead for Automotive Applications Qualified based on AEC-Q200
RoHS MC and MHC Series Chip Ferrite ead for Automotive Applications Qualified based on AEC-Q200 Explanation of Part Number MC 1608 W 12 1 H P - 1 2 3 4 5 6 7 8 9 1. Series Name 2. Size Code: the first
Διαβάστε περισσότεραHigh Frequency Chip Inductor / CF TYPE
High Frequency Chip Inductor / CF TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no
Διαβάστε περισσότεραNPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
Διαβάστε περισσότεραSMD Multilayer Ferrite Chip Beads. Multilayer Ferrite Chip Beads. Product Identification. Dimension Conversion
SMD Multilayer Ferrite Chip Beads Multilayer Ferrite Chip Beads Chilisin offers a wide range of multi-layered ferrite chip beads with various sizes, frequency characteristics, and impedance values for
Διαβάστε περισσότεραSMD Multilayer Ferrite Chip Beads. Multilayer Ferrite Chip Beads. Product Identification. Dimension Conversion
SMD Multilayer Ferrite Chip Beads Multilayer Ferrite Chip Beads Chilisin offers a wide range of multi-layered ferrite chip beads with various sizes, frequency characteristics, and impedance values for
Διαβάστε περισσότεραMetal Oxide Varistor (MOV) Data Sheet
Metal Oxide (MOV) Data Sheet Feature Wide operating voltage range from 18V to 1100V Operating Temperature: -40 ~ +105 Storage Temperature: 15 ~35 Applications The over-voltage protection for transistors,
Διαβάστε περισσότεραChip Ferrite Bead MCB-S/B Series
Chip Ferrite Bead MCB-S/B Series Features Monolithic inorganic material construction Closed magnetic circuit avoids crosstalk SMD Type & suitable for reflow and wave soldering Available in various sizes
Διαβάστε περισσότεραPolymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
Διαβάστε περισσότεραMetal Oxide Varistor (MOV) Data Sheet
Metal Oxide (MOV) Data Sheet Feature Wide operating voltage range from 82V to 1100V Operating Temperature: -40 ~ +125 Storage Temperature: 15 ~35 Applications The over-voltage protection for transistors,
Διαβάστε περισσότεραThick Film Chip Resistors
FEATURES STANDARD SIZING 0402 (1/16W), 0603 (1/10W), 0805 (1/8W), 1206 (1/4W), 2010 (1/2W) AND 2512 (1W) HIGH VOLTAGE (100VDC ~ 3,000VDC) HIGH RESISTANCE VALUES (UP TO 100MW) THICK FILM ON ALUMINA SUSTRATE,
Διαβάστε περισσότεραThin Film Precision Chip Resistor-AR Series
hin Film Precision hip Resistor-R Series Features -hin film passivated ir resistor -Very tight tolerance down to ±0.01% -Extremely low R down to ±5 PPM/ -ide resistance range 1ohm ~ 3Meg ohm -Miniature
Διαβάστε περισσότεραHigh Voltage Thick Film Chip Resistor
Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Highly reliable multilayer electrode construction -Higher component and
Διαβάστε περισσότεραMetal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
Διαβάστε περισσότεραDONGIL ELECTRONOIC CO., LTD.
WWW.ONGIL.NE ONGIL ELECRONOIC CO., L. YPE ESIGNAION ORER INORMAION ONGIL ceramic capacitors are simple in construction and can be applied to tuning. coupling and by passing from H to UH frequency range.
Διαβάστε περισσότεραThin Film Chip Inductor
Scope -Calchip s 0201 and 0402 series inductor is a photo lithographically etched single layer ceramic chip. Calchip s design provides high, excellent Q, and superior temperature stability. This highly
Διαβάστε περισσότεραMultilayer Chip Capacitors C0G/NP0/CH
Multilayer Chip Capacitors C0G/NP0/CH Features Good thermal stability High insulation resistance Low dissipation factor Low inductance Applications Resonant circuits Filter circuits Timing elements Coupling
Διαβάστε περισσότεραDATA SHEET Surface mount NTC thermistors. BCcomponents
DATA SHEET 2322 615 1... Surface mount N thermistors Supersedes data of 17th May 1999 File under BCcomponents, BC02 2001 Mar 27 FEATURES High sensitivity High accuracy over a wide temperature range Taped
Διαβάστε περισσότεραSMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)
Marking Outline: Low DCR, high rated current. Magnetic shielded structure Lead free product, RoHS compliant. RoHS Carrier tape packing, suitable for SMT process. SMT Widely used in buck converter, laptop,
Διαβάστε περισσότεραMF-RX/72 Series - PTC Resettable Fuses
*RoHS COMPLINT & **HLOGEN FREE RX0 480S Features n 7 V rated n Radial leaded devices n Cured, flame retardant epoxy polymer insulating material meets UL 94 V-0 requirements n RoHS compliant* and alogen
Διαβάστε περισσότεραYAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.
YAGEO CORPORATION SMD INDUCTOR / BEADS CLH Series Multilayer Chip Inductors High Frequency Lead-free / For High Frequency Applications APPLICATIONS RF Resonance and Impedance Matching Circuit RF and Wireless
Διαβάστε περισσότεραCross sectional area, square inches or square millimeters
Symbols A E Cross sectional area, square inches or square millimeters of Elasticity, 29,000 kips per square inch or 200 000 Newtons per square millimeter (N/mm 2 ) I Moment of inertia (X & Y axis), inches
Διαβάστε περισσότεραPb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. FEATURES The monolithic construction performs high reliability and ensures a closed magnetic flux in a component avoids magnetic and interference
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Διαβάστε περισσότεραApplication. Features
Thick Film Chip Resistor TCR Series Application Entertainment: Stereo, TV tuners, Tape recorder Appliance: Air conditioner, Refrigerator Computer & relative products: Main board, PDA Communication equipment:
Διαβάστε περισσότεραData Sheet. Customer: Current Sensing Thick Film Chip Resistor - RS Series Size: 0402/0603/0805/1206/1210/2010/2512. Accepted by (QC) Approved by
Data Sheet Customer: Product: Current Sensing Thick Film Chip Resistor - RS Series Size: 0402/0603/0805/1206/1210/2010/2512 Issued Date: 01-Jun-10 Edition: REV.A5 Produced by Checked Approved by Prepared
Διαβάστε περισσότερα0.635mm Pitch Board to Board Docking Connector. Lead-Free Compliance
.635mm Pitch Board to Board Docking Connector Lead-Free Compliance MINIDOCK SERIES MINIDOCK SERIES Features Specifications Application.635mm Pitch Connector protected by Diecasted Zinc Alloy Metal Shell
Διαβάστε περισσότεραGAUGE BLOCKS. Grade 0 Tolerance for the variation in length. Limit deviation of length. ± 0.25μm. 0.14μm ±0.80μm. ± 1.90μm. ± 0.40μm. ± 1.
GAUGE BLOCKS Accuracy according to ISO650 Nominal length (mm) Limit deviation of length Grade 0 Tolerance for the variation in length Grade Grade Grade Grade 2 Limit deviations of Tolerance for the Limit
Διαβάστε περισσότεραNTIC Series. Limiting Inrush Current. NTC Power Thermistor for FEATURES PART NUMBER SYSTEM UL E Ф5~Ф15mm NTIC M S.
FEATURES UL E223037 Body size: Ф5mm ~ Ф30mm Radial lead resin coated High power rating Wide resistance range Cost effective Operating temperature range: Ф5mm: -40ºC~150ºC Ф8~Ф10mm: -40ºC~170ºC Ф13~Ф30mm:
Διαβάστε περισσότεραAnti-Sulfurated Thick Film Chip Resistor
S Series Scope -his specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features -Special construction to prevent sulfuration in a sulfur containing
Διαβάστε περισσότεραHIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
Διαβάστε περισσότεραCarbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
Διαβάστε περισσότερα+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
Διαβάστε περισσότεραMelf Carbon Film Resistor MMC Series
Melf Resistor Melf Carbon Film Resistor MMC Series Coating color: Beige Features - Tolerance up to ±2%. - Wide resistance range:1ω to 10MΩ. Type Dimension TYPE L D C S 0102 2.00±0.10 1.30±0.10 0.55±0.10
Διαβάστε περισσότεραMultilayer Chip Inductor / CL TYPE
Multilayer Chip Inductor / CL TYPE.Features: 1.Closed magnetic circuit avoids crosstalk. 2.S.M.T. type. 3.Excellent solderability and heat resistance. 4.High realiability. 5.The products contain no lead
Διαβάστε περισσότεραCurrent Sense Metal Strip Resistors (CSMS Series)
Features: Range: 1mΩ to 100mΩ Low TCR as low as 75PPM High power rating Custom Values available RoHS Compliant and Halogen Free Operating Temperature: -55 C to +170 C Part Number Structure CSMS 0805 -
Διαβάστε περισσότεραWire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -40 ~+85 R27. External Dimensions 2012 [0805] 2520 [1008] 3216 [1206] 3225 [1210]
Wire Wound Chip Ferrite Inductor SDWL-FW Series Operating Temp. : -4 ~+85 FEATURES Small chip suitable for surface mounting High inductance with ferrite material APPLICATIONS Video cameras, liquid crystal
Διαβάστε περισσότεραCurrent Sensing Metal Chip Resistor
eatures -SMD designed for automatic insertion -High power rating in small size -Low resistance resistor for current detection -Metal foil construction ensures high reliability and performance with very
Διαβάστε περισσότεραSurface Mount Multilayer Inductor
FETURES 0603, 0805, 0806 ND 1008 CSE SIZES HIGH CURRENT ND LOW RESISTNCE NEW "S" VERSION FOR INCRESED STURTION CURRENT UGRDED "H" VERSION FOR HIGHEST CURRENT REFLOW SOLDERING LICBLE CKGE FOR UTOMTIC ICKLCE
Διαβάστε περισσότεραApplications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
Διαβάστε περισσότεραThin Film Precision Chip Resistor-AR Series
hin Film Precision hip Resistor-R Series Features -hin Film Passivated ir Resistor -Very ight olerance from ±0.01%~1% -Extremely Low R from ±5~ PPM/ -ide R-Value onstruction Marking pplications -Medical
Διαβάστε περισσότερα1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat (Epoxy)
ARN series Thin Film High Precision Chip Resistor Features» Advanced thin film technology» Very tight tolerance down to ±0.01%» Extremely low TCR down to ±5ppm/» Wide resistance range 1ohm-3Mega ohm» Miniature
Διαβάστε περισσότεραConfigurations: Dimension (mm) B (max) A (max) 0.20 IWCCG1005. Inductance Range IWCCG ~ IWCCG ~ 1000 IWCCG
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Διαβάστε περισσότεραRoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. PRODUCT DETAIL Electrical Characteristics μh L (Min) Q MHz (Min) SRF Ω DCR IDC ma TEST FREQ: MHz TEST LEVEL: 100 mv Test Instruments HP4291
Διαβάστε περισσότερα± 20% ± 5% ± 10% RENCO ELECTRONICS, INC.
RL15 RL16, RL17, RL18 MINIINDUCTORS CONFORMALLY COATED MARKING The nominal inductance is marked by a color code as listed in the table below. Color Black Brown Red Orange Yellow Green Blue Purple Grey
Διαβάστε περισσότεραPolymer PTC Resettable Fuse: KMC Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. IA size: 0603, 0805, 1206, 1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small
Διαβάστε περισσότεραIWCSeries FEATURES APPLICATION ORDERING CODE TRIGON COMPONENTS. Configurations: Dimension (mm) IWC C G 1608 K 22N T (1) (2) (3) (4) (5) (6) (7)
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Διαβάστε περισσότεραSurface Mount Resistors Packaging Method (Taping)
Products Precision Metal Film (Thin Film), High Reliability Type /High Sound Quality Type / Low Resistance Type Current Sensing Resistors, Metal Plate Type Current Sensing Resistors, Metal Foil Type Surface
Διαβάστε περισσότερα