[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.
|
|
|
- Μνήμη Βιτάλη
- 6 χρόνια πριν
- Προβολές:
Transcript
![7 82 ctual displacement V g [cm 3 ],4 3,76 7,39 22,46 27,53 34,5 43,47 5,44 6,](/docs-images/86/93786395/images/1-2.jpg "59 7, 8,87 99,98 [in 3 ].62.84.6.37.68 2.8 2.65 3.4 3.76 4.34 5. 6.")
![Rotation speed Pressure at inlet* Pressure at outlet** nominal n n [min - ] 5 minimum n min [min - ] 4 35 maximum n max [min - ] 32 3 25 2 8 minimum p min [bar] -,3 (-4.](/docs-images/86/93786395/images/1-4.jpg "4 PSI) maximum p max [bar],5 (7.3 PSI) max.")
1 Gear Pump High Performance Version GP3 up to cm 3 (6. inch 3 ) p max 3 (46 PSI) Speed from 35 to 32 RPM Technical Features Nominal pressure 29 bar, peak pressure 3 High quality aluminum alloys pump with axial play compensation Low noise level in whole operating range High operational reliability and long service life High volumetric efficiency up to 98% International standards flanges as per SE, ISO, DIN, GHOST Symbol R, L Technical Data Nominal Size Parameters Symbol Unit 3,5 7 22, ctual displacement V g [cm 3 ],4 3,76 7,39 22,46 27,53 34,5 43,47 5,44 6,59 7, 8,87 99,98 [in 3 ] Rotation speed Pressure at inlet* Pressure at outlet** nominal n n [min - ] 5 minimum n min [min - ] 4 35 maximum n max [min - ] minimum p min [bar] -,3 (-4.4 PSI) maximum p max [bar],5 (7.3 PSI) max. continuous p 2n [bar] [PSI] maximum p 2max [bar] [PSI] peak p 3 [bar] [PSI] Nominal flow rate (min.) [l. min - ] 4, 9,2 24,2 3,3 38,4 47,5 6,6 7,8 85,9 99, 4,2 39,5 at n n and p n 2n [GPM] Maximum flow rate [l. min - ] 3,9 43,4 54,8 7,8 86,8,6 9,9 3,7 45,6 53,9 6,3 77,3 at n max and p max 2max [GPM] Nominal input power (max.) at n n and p 2n P n [kw] 8,,7 4,8 9,2 23,5 29, 35,8 4,8 45,3 48, 48,2 52,9 Maximum input power at n max and p 2max P max [kw] 8,4 26,7 33,8 43,7 53,5 62, 7,6 76, 78,2 76,6 7,6 7,6 Weight m [kg] [lbs] ) * pressure in the reversible design can be up to p = p 2n -7 bar max. External drainage must be used in case of the reversible design. 2) ** pressure in the reversible design is % lower than shown in the table (depending on operating conditions). 3) p 2n maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation. 4) p 2max maximum pressure - maximum pressure permissible for a short time, max. 2 s. 5) p 3 peak pressure - short-time pressure (fractions of a second) arising in case of a sudden change of the operating mode; any excess of this pressure during operation is impermissible. Gear Pump / Size GP ccm Volumetric efficiency % Mechanical efficiency % 85 Fluid temperature range (NR) C ( F) ( ) Fluid temperature range (FPM) C ( F) ( ) Viscosity range mm 2 /s (SUS) ( ), 2 (5849) for cold start Hydraulic fluid Hydraulic oils of power classes (HL, HLP) to DIN 5524 Max. degree of fluid contamination for p 2 2 bar Class 2/8/5 acc. to ISO 446 Max. degree of fluid contamination for p 2 2 bar Class 2/7/4 acc. to ISO 446 Page Subject to change GP3_8_a_/25
2 Direction of rotation, reversible design Determine direction of rotation by looking at the drive shaft. The pump can be used only in the specified direction of rotation. The pumps codes (bidirectional) have an external drainage with an orifice located in the cover or the flange. CLOCKWISE R COUNTER-CLOCKWISE L REVERSILE INLET OUTLET INLET OUTLET INLET M6 x,5 (.6) 22 (.89) (.4) INLET OUTLET Ordering Gear pump serie 3 Direction of rotation Counter clockwise Clockwise i-directional Flange design Shaft Type GP3 3,5 7 22, L R RL RM RN SC SE I I U L M K CL CM DN DP DR DS DT DW KJ VO VP V S R C MI MJ ML MM MP GC GD GE GF UD UE UH UI HI HJ HK HL C D E E EC N V H ED EE KC KD KE KF SI SJ SK SL No designation 4 9 Shaft seal standard without shaft seal customized Seals NR FPM (Viton) HNR / ports Ports orientation Combination of Flanges and Shafts Flange Design RL RM RN SC SE I/I U L M K Shaft Type CL CM DN DP DR DS DT DW KJ VO VP V Port orientation S R C Subject to change GP3_8_a_/25 Page 2
3 Characteristics measured at ν = 32 mm 2 /s (56 SUS) ccm 3,5 ccm 7 ccm bar 2 8 bar 4 bar 27 bar 2 8 bar 4 bar,4,5 2 2,5 3,2 Rotation speed n [/min],35,5 2 2,5 3,2 Rotation speed n [/min],4,5 2 2,5 3,2 Rotation speed n [/min] 22,5 ccm 27 ccm 34 ccm bar bar bar bar 2 bar bar 24 bar 2 bar 4 bar 43 ccm 5 ccm bar 24 bar 9 bar 4 bar 9 bar 29 bar 24 bar 9 bar 4 bar 9 bar 29 bar 2 2 bar,35,5 2 2,5 3,2 Rotation speed n [/min] ccm 29 bar 23 bar 9 bar 4 bar 29 bar 23 bar 9 bar 4 bar,35,5 2 2,5 3,2 Rotation speed n [/min] 29 bar 24 bar 9 bar 4 bar 29 bar 9 bar 24 bar 4 bar,35,5 2 2,5 3 Rotation speed n [/min] bar bar bar bar ,35,5 2 2, bar 23 bar 9 bar 4 bar Rotation speed n [/min] bar 4 bar 27 bar 9 bar 4 bar bar ,35,5 2 2,5 3,35,5 2 2,5 Rotation speed n [/min] Rotation speed n [/min] 2 2 bar Page 3 Subject to change GP3_8_a_/25
![Characteristics measured at ν = 32 mm 2 /s (56 SUS) 7 ccm 82 ccm ccm 7 23 bar 6 8 bar 5 4 4 bar 3 2 23 bar 8 bar 4 bar,35,5,8 Rotation speed n [/min] 35 3 25 2 5 5 7 2 bar 6 5 4 25 bar 3 75 bar 2 25](/docs-images/86/93786395/images/4-0.jpg "bar 5 35 3 2 bar25 75 bar 2 5 7 6 8 bar 5 25 bar 4 3 75 bar 2 75 bar,35,5,8,35,5,8 Rotation speed n [/min] Rotation speed n [/min] 8 bar 25 bar 4 35 3 25 2 5 5 Ordering - Multiple Version Gear pump")
4 Characteristics measured at ν = 32 mm 2 /s (56 SUS) 7 ccm 82 ccm ccm 7 23 bar 6 8 bar bar bar 8 bar 4 bar,35,5,8 Rotation speed n [/min] bar bar 3 75 bar 2 25 bar bar25 75 bar bar 5 25 bar bar 2 75 bar,35,5,8,35,5,8 Rotation speed n [/min] Rotation speed n [/min] 8 bar 25 bar Ordering - Multiple Version Gear pump serie 3 GP3 Direction of rotation Counter clockwise Clockwise i-directional - / - - / - Front pump (shaft side) 3,5 7 22, Rear pump L R S C Front pump MI MJ ML MM MP GC GD GE GF UD UE UH UI HI HJ HK HL Rear pump C D E E EC ED EE KC KD KE KF SI SJ SK SL N V H No designation 4 9 Shaft seal standard without shaft seal customized Seals NR FPM (Viton) HNR / ports lways from left: - Ports orientation Use bling plug for not used ports Flange design RL RM RN SC SE I I U L M K CL CM DN DP DR DS DT DW KJ VO VP V Shaft Type Port orientation S C Subject to change GP3_8_a_/25 Page 4
![28) 5 (. 59) I 8 (.5) 46 [8 (. 425] ) 8 (3.5) 78 (3.7) 5 (.](/docs-images/86/93786395/images/5-4.jpg "59) 8 ( 4. 6 5) 9 ( 3. 54 ) [53,8 ( 6. 6 ) ],6 (4.")
![25 ) 8 (3.5) [8 (. 425] ) 4 (.57) 4 x 3 (.5) 2(. 79) 8 (3.](/docs-images/86/93786395/images/5-7.jpg "5) f8 8,5 (. 33) 2,8 (.86) 3x 2,2 (.48) 2(. 79) 52 (2.")
5 Flange design in millimeters (inches) RL RM 48 (5.83) 28 (5.4) 42,2 (.66) 8,5 (4.67) 98,5 (3.88) 2,8 (.86) 25 (.98) 5 (.2) 5,8 (2.) f8 62 (6.38) 43 (5.63) 7,5 (2.8) 23 (4.84) 4 (4.9) 24,5 (.96) [ 28 (.)] 7 (2.76) f8 5 (.2) 4x (.43) 4x (.43) RN 22 (4.8) 2,5 (4.4) 25 (.98) 8 (.3) SC 74 (6.85) 25 (.98) [5 (. 2 )] 65 (6.5) 45 (5.7) 48 (.89) 24,5 (.96) 5 (4.3) f8 55 (6.) 6 (2.36) 2x 4 (.55),6 (4. ) f8 9 (. 35) 4x (.43) 2(. 79) SE 8 (.5) 46 9 (. 354) 7 (. 28) 5 (. 59) I 8 (.5) 46 [8 (. 425] ) 8 (3.5) 78 (3.7) 5 (. 59) 8 ( ) 9 ( ) [53,8 ( 6. 6 ) ],6 (4. ) f8 49 (5.87) 8 ( ) 8 (3.5) 2,8 (.86) 8 (3.5) 9(. 35) 4 x 3 (.5) 8 (. 3) (. 433) 4 x 4,3 (.5 6 ) 2 (. 79) 2 (. 79) I 8 (.5) 46 8 (3.5) 52 (2.5) 5 (. 59) U 73 (2.87) 8 (.5) (2.6) 8 (.7) 3 (.2) 49 (5.87) 8 ( ) 8 (3.5) [8 (. 425] ) 4 (.57) 4 x 3 (.5) 2(. 79) 8 (3.5) f8 8,5 (. 33) 2,8 (.86) 3x 2,2 (.48) 2(. 79) 52 (2.5) f8 Page 5 Subject to change GP3_8_a_/25
6 Flange design in millimeters (inches) K 34 (5.28) (4.33) 59 (2.32) 3 (.5) 5 (.2) 6x (.43) 53 (2.9) 3 (.5) 4 (.6) 5,7 (5.93) 86 (3.39) 4x (.43) 4 (4.49) 9 (3.54) f8 6 (6.3) 28 (5.4) 5 (4.3) 85 (3.35) f8 2(. 79) 23 (4.84) 2,2 (.8) M 78 (3.7) 8 (4.65) 78 (3.7),9 (.43) 44,9 (.77) L 44,9 (.77),9 (.43) 8 (4.65) 78 (3.7) 78 (3.7) 25 (.98) 7,2 (.28) 52 (2.5) f7 2x 2 (.47) 2x 2 (.47) Subject to change GP3_8_a_/25 Page 6
7 Shaft design in millimeters (inches) driving device must not generate an axial or a radial load of the pump shaft, unless this is exclusively permitted for the pump with a front-end bearing. sk producer for the version with front-end bearing. Maximal torque for clutch between sections in multiple version is 22 Nm. CL CM DN 5,8 (2.) 2,6 (.85),2 (.44) :8 42 (.65) 47 (.85) M4x,5 (.6) KEY 4x7,5 WSHER NUT M4x,5 2, (.48) Max. 3 Nm (22.3 lbf.ft) 5 (4.3) 25 (.98) :5 45 (.77) 53 (2.9) KEY 5x7,5 WSHER NUT M6x,5 M6x,5 (.6) 3,5 (.53) Max. 3 Nm (22.3 lbf.ft),6 (4.) 4,3 (.59) 3,3 (.23) 25 (.98) 9 (.35) 2,8 (.86) INVOLUTE SPLINE SE 7/8 6/32 DP3T Max. 34 Nm (25.8 lbf.ft) DP DR KJ INVOLUTE SPLINE SE 6/32 DP5T Max. 36 Nm (265.5 lbf.ft) 24 (.94) 3 (.8) 9 (.35) 4 (.57) 25 (.98),6 (4.) 4 (.55) 5 (.59) 25 (.98) 52 (2.5) Max. 34 Nm (25.8 lbf.ft) EUILTERL SPLINE UNI 22 2x25x5 2 (.47) 3 (.2) Max. 23 Nm (69.6 lbf.ft) 25 (.98) 52 (2.5) (.39) DS DT DW 55 (2.7) 8,5 (.33) 39 (.54) 48 (.89) 5 (.2) 35 (.38) 25 (.98) 52 (2.5) 33 (.3) 2,2 (.83) 24,7 (.97) 35,9 (.4) 8 (3.5) Max. 34 Nm Max. 4 Nm (25.8 lbf.ft) (295. lbf.ft) EUILTERL SPLINE STRIGHT-FLNKED GROOVING 6dr. Ø2 8x32x36x6 DIN (3.5) 9 (3.54) Max. 34 Nm (25.8 lbf.ft) INVOLUTE SPLINE ZV 25x,5x6 5 (.2) VO VP V KEY 6,35h9x6,35x4 Max. 3 Nm (22.3 lbf.ft) 5 (2.) 6 (2.36) 22,2 (.87) 25 (.98),6 (4.) KEY 5h9x5x36 4 (.57) 46 (.8) 2 (.79) 2,6 (.85) 5,8 (2.) Max. 8 Nm (32.8 lbf.ft) KEY 8h9x7x45 53 (2.9) 58 (2.83) 25 (.98) 27,9 (.) 7 (2.76) Max. 34 Nm (25.8 lbf.ft) Page 7 Subject to change GP3_8_a_/25
8 Ports design in millimeters (inches) Metric thread according to ISO 649 C D C D to 5 (3.) MM M33x2 8 4 (.57) MJ M27x2 6 (.63) 33 (.3) above 5 (3.) MP M48x2 (.7) 56 (2.2) MM M33x2 8 (.7) 4 (.57) drain MD M6x, (.89) (.4) ME M8x,5 (.55) 24 (.94) (.4) SPP pipe thread according to 228- to 7 (.4) GC G /2 4 (.55) 33 (.3) C D C D GC G /2 4 (.55) 33 (.3) 7-34 (.4-2.7) GD G 3/4 6 (.63) 39 (.54) (.4) GD G 3/4 6 (.63) 39 (.54) 34-5 (2.7-3.) GE G 45 (.77) 8 (.7) above 5 (3.) GF G /4 57 (2.24) GE G 8 (.7) 45 (.77) (.4) UNF thread according to SE to 7 (.4) UE -/6-2UNF 7-27 ( ) ( ) UH C D C D -5/6-2UNF above 39 (2.38) UI -5/8-2UNF 2 9 (.75) 23 (.9) 4 (.6) 49 (.93) 58 (2.28) (.4) UD UE UH 7/8-4UNF -/6-2UNF -5/6-2UNF 7 (.67) 9 (.75) 23 (.9) 34 (.34) 4 (.6) 49 (.93) (.4) Flanged fittings according to DIN 89/892 E F G H E F G H LL HL 26 (.2) M 5 (2.) HI 4 (.57) 6 (.63) 8 (.7) M8 6 (.63) HK 25 (.98) M8 55 (2.7) HJ 55 (2.7) Flanged fittings according to SE, metric thread to 6 (3.72) above 6 (3.72) EC ED EE E F G H I E F G H I 25,4 (.) 3,5 (.2) 39,3 (.55) M M2 22 (.87) 27 (.6) 52,4 (2.6) 58,7 (2.3) 69,8 (2.75) 26,2 (.3) 3,2 (.9) 35,7 (.4) E EC ED 9 (.75) 25,4 (.) 3,5 (.2) M 22 (.87) 47,6 (.87) 52,4 (2.6) 58,7 (2.3) 22,2 (.87) 26,2 (.3) 3,2 (.9) Subject to change GP3_8_a_/25 Page 8
9 Ports design in millimeters (inches) Flanged fittings according to SE, UNC thread Flanged fittings - cross to 6 (3.72) above 6 (3.72) C D E E F G H I E F G H I 25,4 (.) 3,5 (.2) 39,3 (.55) 3/8-6-UNC 7/6-4-UNC /2-3-UNC 22 (.87) 27 (.6) 52,4 (2.6) 58,7 (2.3) 69,8 (2.75) 26,2 (.3) 3,2 (.9) 35,7 (.4) C D 9 (.75) 25,4 (.) 3,5 (.2) 3/8-6-UNC 7/6-4-UNC 22 (.87) 29 (.4) 47,6 (.87) 52,4 (2.6) 58,7 (2.3) 22,2 (.87) 26,2 (.3) 3,2 (.9) E F G H E F G H LL KD 26 (.2) M 5 (2.) KC 4 (.57) 6 (.63) 8 (.7) M8 6 (.63) KF 25 (.98) M8 55 (2.7) KE 55 (2.7) Flanged fittings - square E F G H E F G H to 43 (2.62) SL 23 (.9) M8 46 (.8) SK 6 (.63) M8 46 (.8) 22 (.87) 22 (.87) above 43 (2.62) SJ 27 (.6) M 54 (2.3) SI 9 (.75) M 54 (2.3) Drain C D LL MD M6x,5 22 (.87) 4 (.55) ME M8x,5 24 (.94) (.4) GPP Pumps - basic design in millimeters (inches) GP3-*R-IDS-SG*G*-N 36,8 (.45) 25 (.98) 5 (.59) 8,5 (.33) Fr max = 32 N Fa max = 9 N 2,8 (.86) 8 (3.5) 7 (.6) 2 (4.4) 7 (6.73) 6 (3.76) 3,5 (5.4) 28 (8.2) 27 (.68) 6,3 (4.58) 79,5 (7.7) 7 (4.34) 34,8 (5.3) 26,5 (8.52) 34 (2.8) 9 (4.69) 85 (7.28) 82 (5.) 39,3 (5.48) 225,5 (8.88) 43 (2.65) 22,8 (4.43) 92,5 (7.58) (6.) 5,8 (5.94) 248,5 (9.78) 5 (3.4) 26,3 (4.97) 99,5 (7.85) 2 (.79) 78 (3.7) 39 (.54) 55 (2.7) Page 9 Subject to change GP3_8_a_/25
10 GP3 Pumps - basic design in millimeters (inches) GP3-*R-RLCL-SG*G*-N 25 (.98) 25 (.98) 5 (.2) (.62) 56 (2.2) 2 (4.4) 43 (2.65) 69,8 (2.75) 39,5 (5.49) 3,5 (.84) 57,5 (2.26) 5 (4.53) 5 (3.4) 73,3 (2.89) 46,5 (5.77) 7 (.6) 59 (2.32) 8 (4.65) 6 (3.76) 77,5 (3.5) 55 (6.) 22,5 (.37) 6,3 (2.4) 22,5 (4.82) 7 (4.34) 8,8 (3.22) 63,5 (6.44) 27 (.68) 63,3 (2.49) 26,5 (4.98) 82 (5.) 86,3 (3.4) 72,5 (6.79) 34 (2.8) 66 (2.6) 32 (5.2) (6.) 97,8 (3.85) 95,5 (7.7) 2,8 (.86) 5,8 (2.) 47 (.85) GP3-*R-IDS-SG*G*-N 25 (.98) 5 (.59) 8,5 (.33) 3 (.5) (.62) 83 (3.27) 39 (5.47) 5 (3.4),3 (3.95) 73,5 (6.83) 7 (.6) 86 (3.39) 45 (5.7) 6 (3.76) 4,5 (4.) 82 (7.7) 27 (.68) 9,3 (3.56) 53,5 (6.4) 7 (4.34) 8,8 (4.28) 9,5 (7.85) 34 (2.8) 93 (3.66) 59 (6.26) 82 (5.) 3,3 (4.46) 99,5 (6.44) 43 (2.65) 96,8 (3.8) 66,5 (6.56) (6.) 24,8 (4.9) 222,5 (8.76) 2,8 (.86) 25 (.98) 2 (.79) 39 (.54) 8 (3.5) 52 (2.5) 55 (2.7) GP3-*/GP-*L-RLCL-SM*M*/M*M*-N 7 /,6 (.6 /. ) 68 (2.68) 34 (.34) 38,3 (.5) 9,2 (.76) 7 / 2,5 (.6 /.5 ) 68 (2.68) 34 (.34) 4,5 (.63) 2,8 (.82) 7 / 3,6 (.6 /.22 ) 68 (2.68) 34 (.34) 45,6 (.8) 22,8 (.9) 27 /,6 (.65 /. ) 76,5 (3.) 38,3 (.5) 38,3 (.5) 9,2 (.76) 27 / 2,5 (.65 /.5 ) 76,5 (3.) 38,3 (.5) 4,5 (.63) 2,8 (.82) 27 / 3,6 (.65 /.22 ) 76,5 (3.) 38,3 (.5) 45,6 (.8) 22,8 (.9) 34 /,6 (2.8 /. ) 82 (3.23) 4 (.6) 38,3 (.5) 9,2 (.76) 34 / 2,5 (2.8 /.5 ) 82 (3.23) 4 (.6) 4,5 (.63) 2,8 (.82) 34 / 3,6 (2.8 /.22 ) 82 (3.23) 4 (.6) 45,6 (.8) 22,8 (.9) 43 /,6 (2.62 /. ) 89,5 (3.52) 44,8 (.76) 38,3 (.5) 9,2 (.76) 5 (.59) 9,7 (.38) 2,8 (.86) 5 (.2) (.85) (.98) 5,8 (2.) GP3-*/GP2-*R-RLCL-SK*K*/K*K*-N 5 / 8 (3. /.49 ) 96,5 (3.78) 48,3 (.9) 57 (2.24) 28,5 (.2) 34 / (2.8 /.67 ) 82 (3.23) 4 (.6) 62,5 (2.46) 3,3 (.23) 5 / (3. /.67 ) 96,5 (3.78) 48,3 (.9) 62,5 (2.46) 3,3 (.23) 8xE 6 (.63) D C 6, (.24) 4x M 6 (.63) 5 (2.) 26 (.2) 2,8 (.86) 5 (.2) 5,8 (2.) 2 (.79) 38 (.5) (.85) (.98) Subject to change GP3_8_a_/25 Page
[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.
![[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.](/thumbs/93/111947477.jpg "[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.")
Gear Pump High Performance Version GP up to, cm (.7 inch ) p max bar ( PSI) Speed from to RPM Technical Features Nominal pressure bar, peak pressure bar High quality aluminum alloys pump with xial playe
[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.
![[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.](/thumbs/75/72614325.jpg "[bar] 0,5 (7.3 PSI) maximum continuous pressure - maximum working pressure, at which the pump can be operated without time limitation.")
Gear Pump High Performance Version GP up to, cm (.7 inch ) p max bar ( PSI) Speed from to RPM Technical Features Operating pressure bar, Peak pressure bar High-strength quality aluminum alloys pump with
Group 30. Contents.
Group 30 Contents Pump type Page Pump type Page Pump type Page 30A(C)...X002H 4 30A(C)...X013H 5 30A(C)...X068H 6 30A(C)...X068HU 7 30A(C)...X136H 8 30A(C)...X136Y 9 30A(C)...X146H 10 30A(C)...X160H 11
Lowara SPECIFICATIONS
SH Series Centrifugal pumps entirely made of AISI 36 stainless steel according to EN 733 (ex DIN 24255). Designed to pump hot, cold and moderately aggressive liquids. Available versions: SHE Close-coupled
High hydraulic efficiency Motor designed to EN standards IDENTIFICATION NAME. F - in line ports with ROUND FLANGES (counterflanges on request)
VLR/VLRI/VLR VLR Vertical multistage centrifugal pumps The VLR are vertical multistage, in-line, centrifugal pumps, directly connected to an electric motor. They are not self-priming. High hydraulic efficiency
Vertical multistage centrifugal pumps in AISI 316 stainless steel
VLRI/X Vertical multistage centrifugal pumps in AISI 316 stainless steel The VLRI/X are vertical multistage, in-line, centrifugal pumps, directly connected to an electric motor. They are not self-priming.
MATRIX. EBARA PUMPS EUROPE S.p.A. HORIZONTAL MULTISTAGE PUMPS
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 2-3-4-5 impellers ) 204 PERFORMANCE CURVE 3 ( 6-7-8-9 impellers ) 205
Heat exchanger. Type WT. For the reheating of airflows in rectangular ducting PD WT 1. 03/2017 DE/en
X X testregistrierung Heat exchanger Type For the reheating of airflows in rectangular ducting Rectangular hot water heat exchanger for the reheating of airflows, suitable for VAV terminal units Type TVR,
Gearmotor Data. SERIES GM9000: We have the GM9434H187-R1
SERIES GM9: We have the GM9434H187-R1 Gearmotor Data Item Parameter Symbol Units 5.9:1 11.5:1 19.7:1 38.3:1 65.5:1 127.8:1 218.4:1 425.9:1 728.1:1 1419.8:1 2426.9:1 4732.5:1 1 Max. Load Standard Gears
BALL VALVE NP - LEVE 754. Range of application: Temperature range: Perform standard: Order information: Paint: Soft seal Ball valve.
Soft seal Ball valve Unilateral spring washer Seat Float ball valve Flange PN16-40 DN15-200 Range of application: In industrial facilities, oil and chemical industry and related manufacturing industries
DLG Series. Lowara SPECIFICATIONS APPLICATIONS ACCESSORIES MATERIALS. General Catalogue
DLG Series Submersible pumps with open impeller with grinder assembly for pumping sewage, liquids, wastewater in general and industrial sludge, draining of flooded excavations. SPECIFICATIONS Delivery:
Lowara APPLICATIONS MATERIALS. General Catalogue
FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron and impeller in AISI 36* stainless steel, designed to pump hot, cold and moderately
SIEMENS Squirrel Cage Induction Standard Three-phase Motors
- SIEMENS Squirrel Cage Induction Standard Three-phase Motors 2 pole 3000 rpm 50Hz Rated current Power Efficiency Rated Ratio Noise Output Frame Speed Weight 3V 400V 415V factor Class 0%Load 75%Load torque
Replacement Guide. Wilo Circulators for Heating and Secondary Hot Water Circulation. Pioneering for You
Replacement Guide Wilo Circulators for Heating and Secondary Hot Water Circulation 2013 Pioneering for You Grundfos Single pumps Wilo new High-efficiency pumps infinitely variable, 1~230V, 50Hz Stratos
High pressure centrifugal pumps
High pressure centrifugal pumps Wilo-Multivert MVI (North America) Series description H [ft] 3 1 MVI 1 1 1 MVI 1 MVI 3 MVI MVI 1 1 Q [m³/h] Wilo-Multivert-MVI Hz - North America Q [US gpm] H [m] 1 1 1
ECOL Motors In Aluminum Housing
ECOL Motors In Aluminum Housing FEATURES APPLICATIONS E TBS C TBW B L K AC TBH A AA KK H AD N T E TBS R TBW L AC M 56-160 IM B3 56-160 IM B5 56-160 IM B14 TBH 4-S KK P HD N TBS T E R TBW L AC P M TBH 4-S
Aluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Recommended purity level >4 m(c) / >6 m(c) / >14 m(c) 15/13/10. Type of system/area of application/ Components
Type of system/area of application/ Components Systems with servo hydraulics sensitive to fine contamination Industrial hydraulics Proportional technology High pressure systems Industrial and mobile hydraulics
Aluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
ZLW Series. Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD
ZLW Series Single-stage Monoblock Centrifugal Pump ZL PUMP GROUP.,LTD 1 Application Apply as the transportation of liquids in the fields of air condition, heating, sanitary water, water treatment cooling,
Applications Water distribution
1 FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron designed to pump clean, chemically non-aggressive water and liquids. Available versions:
50 Hz n= 1450 rpm. Standardised EN 733 centrifugal pumps. PERFORMANCE RANGE Flow rate up to 3000 l/min (180 m³/h) Head up to 24 m INSTALLATION AND USE
F Standardised EN centrifugal pumps Hz n= rpm Clean water Industrial use PERFORMNCE RNGE Flow rate up to l/min ( ) Head up to m PPLICTION LIMITS Manometric suction lift up to m Liquid temperature between
Finish: Anticorrosive finish in polyester. Number of motor poles 4=1400 r/min. 50 Hz 6=900 r/min. 50 Hz 8=750 r/min. 50 Hz
HEP HEPT HEP: Wall-mounted axial fans, with IP65 motor HEPT: Long-cased axial fans, with IP65 motor Wall-mounted axial (HEP) and long-cased (HEPT) fans, with fibreglass-reinforced plastic impeller. Fan:
DC SERVO MOTORS Previous N23XX Series. EC057C Series Salient Characteristics
US: +1 267 933 215 Europe: +33 2 92 87 51 sia: +86 21 5763 18 Harleysville, P 438 DC SERO MOTORS BRUSHESS DC MOTORS The EC57C series brushless DC motor is a high torque density model brushless motor in
CSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Anti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
Precision Metal Film Fixed Resistor Axial Leaded
Features EIA standard colour-coding Non-Flame type available Low noise and voltage coefficient Low temperature coefficient range Wide precision range in small package Too low or too high ohmic value can
Specification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)
High CV-value Long Life > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life Optimized designs available on request RoHS Compliant application Basic design Smoothing, energy storage,
DC SERVO MOTORS. EC057B Series Salient Characteristics E E
US: + 267 933 25 Europe: +33 2 92 87 5 sia: +86 2 5763 58 Harleysville, P 438 DC SERO MOTORS 238XXXXNC Series BRUSHESS DC MOTORS The EC57B series brushless motor is a high torque model brushless motor
4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
C4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
Westfalia Bedienungsanleitung. Nr
Westfalia Bedienungsanleitung Nr. 108230 Erich Schäfer KG Tel. 02737/5010 Seite 1/8 RATED VALUES STARTING VALUES EFF 2 MOTOR OUTPUT SPEED CURRENT MOMENT CURRENT TORQUE TYPE I A / I N M A / M N Mk/ Mn %
First Sensor Quad APD Data Sheet Part Description QA TO Order #
Responsivity (/W) First Sensor Quad PD Data Sheet Features Description pplication Pulsed 16 nm laser detection RoHS 211/65/EU Light source positioning Laser alignment ø mm total active area Segmented in
VERTICAL MULTI-CELL CENTRIFUGAL PUMPS IN AISI 316 STAINLESS STEEL
Lenntech info@lenntech.com Tel. +31-152-61-9 www.lenntech.com Fax. +31-152-616-289 NOCCHI VLRI/X HIGH HYDRAULIC EFFICIENCY, ENTIRELY IN AISI 34 STAINLESS STEEL (VLRI) OR AISI 316 (VLRX), STANDARDIZED MOTOR
ELWOOD HIGH PERFORMANCE MOTORS H-SERIES MOTOR DATA
H-SERIES MOTOR DATA MOTOR MODEL H-3007 H-3016 H-4030-P H-4030-M H-4040 H-4050 H-4075 H-6100 H-6200 H-6300 MECHANICAL DATA (1) Rated Torque, Cont (Stall) 0.8 2.3 3.4 3.4 5.0 6.8 10.2 11.3 22.6 36.7 lb-in
Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
GAUGE BLOCKS. Grade 0 Tolerance for the variation in length. Limit deviation of length. ± 0.25μm. 0.14μm ±0.80μm. ± 1.90μm. ± 0.40μm. ± 1.
GAUGE BLOCKS Accuracy according to ISO650 Nominal length (mm) Limit deviation of length Grade 0 Tolerance for the variation in length Grade Grade Grade Grade 2 Limit deviations of Tolerance for the Limit
- DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX DIMENSION TABLE MATRIX PACKING 403
CONTENTS Page 1 - SPECIFICATIONS 200-201 PERFORMANCE RANGE 202 SELECTION CHART 203 TYPE KEY and CURVE SPECIFICATIONS 204 PERFORMANCE CURVE 3 ( 2-3-4-5 IMPELLERS ) 205 PERFORMANCE CURVE 3 ( 6-7-8-9 IMPELLERS
7AAC63-90 SINGLE-PHASE MOTORS PERMANENT CAPACITOR 7AACC SINGLE-PHASE MOTORS CAP START - CAP RUN. squirrel cage induction motors 7AACC63-100
7AAC63-90 SINGLE-PHASE MOTORS PERMANENT CAPACITOR squirrel cage induction motors 7AACC63-100 SINGLE-PHASE MOTORS CAP START - CAP RUN Electric Motors Division WELLINGBOROUGH 7AACC63-100 EXICO LIMITED, 16
Submersible MOTORS PRODUCT CATALOGUE
D E E P W E L L Submersible MOTORS PRODUCT CATALOGUE Due to continuous technical developments and improvements in design any changes, alterations and amendments of specifications or technical data are
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES) (8) 95-8365 venkel.com Features: RoHS Compliant and Halogen Free Good Q values High SRF range: 1nH to 47uH Tolerance: ±.2nH, ±.3nH, ±2%, ±5%, ±1% High
Rod End > Ball Bearings Product Overview
Rod End > Ball Bearings Product Overview Table of Contents EN4035 EN4036 FC...M / FCN...M ASNA2579E NSA8159 REP / RAP REP...F Page Il-3-4 Il-5-6 Il-7-8 Il-9-10 Il-11-12 Il-13-14 Il-15-16 EN4035 Rod End
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Parts catalogue LAWN MOWER
OREC ISSUED NO. GR535PRO-1 Parts catalogue LAWN MOWER (EXPORT MODEL) GR535PRO(2Action) MODEL GR535PRO CODE 0278- CONTENTS Fig.1 GEAR CASE------------------------------------------------------------ 1 Fig.2
ΙΑΤΡΙΚΟΣ ΕΞΟΠΛΙΣΜΟΣ ΑΝΑΛΩΣΙΜΑ ΕΞΕΤΑΣΤΙΚΟΙ ΦΑΚΟΙ & ΦΩΤΙΣΜΟΣ
ΙΑΤΡΙΚΟΣ ΕΞΟΠΛΙΣΜΟΣ ΑΝΑΛΩΣΙΜΑ ΕΞΕΤΑΣΤΙΚΟΙ ΦΑΚΟΙ & ΦΩΤΙΣΜΟΣ ZOOM Modern LE Ds lamp of cold light with a 5X magni - fication. The intensity of light can be adjusted. Its articulated arm eases the movement
Monolithic Crystal Filters (M.C.F.)
Monolithic Crystal Filters (M.C.F.) MCF (MONOLITHIC CRYSTAL FILTER) features high quality quartz resonators such as sharp cutoff characteristics, low loss, good inter-modulation and high stability over
AXDR Double-Row Angular Contact Roller Bearings
www.myonic.com XR ouble-row ngular ontact Roller earings dimension tables contents XR VX XR SX XR ES full roller / result: maximum stiffness Spacer / result: low friction torque and speed with standard-grease
Alféa Extensa + and Extensa Duo +
Alféa Extensa + and Extensa Duo + FR Document n 1592-2~ 12/07/2013 EN Heat pumps air/water split 1 service and 2 services Technical manual Intended for professionals Completed by the installation and operating
- CONSTRUCTIONS 300 SECTIONAL VIEW MATRIX SECTIONAL VIEW MATRIX CONSTRUCTIONS 302 CONSTRUCTIONS 303 MECHANICAL SEAL 304
CONTENTS Page - SPECIFICATIONS 200 PUMP SPECIFICATION 200 TYPE KEY 201 SELECTION CHART 202 SELECTION CHART 203 PERFORMANCE CURVE 3 ( 2-3-4-5 impellers ) 204 PERFORMANCE CURVE 3 ( 6-7-8-9 impellers ) 205
Transient Voltage Suppressor
Transient Suppressor Features Glass passivated junction Low incremental surge resistance, excellent clamping capability Underwriters Laboratory Recognition under UL standard for safety 497B: Isolated Loop
Fixed spherical bearing KF 32 N/mm 2 Dimensions and weights acc. to German approval
Fixed spherical bearing KF 32 N/mm 2 Höga Kusten Bron, Sweden Permissible concrete pressure = 32 N/mm 2 type of load H D u D o weight bearing V kn mm mm mm kg KF 1 1000 112 300 300 66 KF 2 2000 116 370
Thin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) Type EI Size Power Rating at 70
RAC. Technical Data Book. RAC(Quantum) for North America (R410A, 60Hz, HP) Model : AR09/12/18/24KSFPDWQNCV AR09/12/18/24KSFPDWQXCV
RAC Technical Data Book RAC(Quantum) for North America (R410A, 60Hz, HP) Model : AR09/12/18/24KSFPDWQNCV AR09/12/18/24KSFPDWQXCV History Version Modification Date Remark Ver 1.0 Release RAC (Quantum) TDB
± 20% ± 5% ± 10% RENCO ELECTRONICS, INC.
RL15 RL16, RL17, RL18 MINIINDUCTORS CONFORMALLY COATED MARKING The nominal inductance is marked by a color code as listed in the table below. Color Black Brown Red Orange Yellow Green Blue Purple Grey
- DIMENSIONS AND WEIGHT 400 PUMP MATRIX PUMP DRAWING MATRIX 5/10/ PUMP TABLE MATRIX 5/10/ PACKING 403
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 SELECTION CHART TABLE 202 TYPE KEY AND CURVE SPECIFICATIONS 203 PERFORMANCE CURVE 3 ( 2-3 IMPELLERS ) 204 PERFORMANCE CURVE 3 ( 4-5-6 IMPELLERS )
Type selection. Type selection for pressure series from 100 dapa to 3150 dapa
for pressure series from 100 dapa to 3150 dapa Sound tables according to types for pressure series from 100 dapa to 3150 dapa Weight list and noise values for standard motors Performance curves 1 to 7
Multilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
Metal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Return Line Filters Type RTF10/25
Technical Data Type RTF1/25 Product Description Technical Data Construction Materials Filter head: Sealings: Aluminum NR (una-n ) Other sealing materials on request Options and Accessories Valve Clogging
UDZ Swirl diffuser. Product facts. Quick-selection. Swirl diffuser UDZ. Product code example:
UDZ Swirl diffuser Swirl diffuser UDZ, which is intended for installation in a ventilation duct, can be used in premises with a large volume, for example factory premises, storage areas, superstores, halls,
Transient Voltage Suppression Diodes: 1.5KE Series Axial Leaded Type 1500 W
Features 1. Reliable low cost construction utilizing molded plastic technique 2. Both bi-directional and uni-directional devices are available 3. Fast response time 4. Excellent clamping capacity 5. 1500
DC054B Series Salient Characteristics
www.pittman-motors.com US: +1 7 933 25 sia: +86 57 58 Harleysville, P 4 DC SERO MOTORS BRUSH COMMUTTED DC MOTORS Previous XXX Series The DC54B series brush commutated DC motor is a 54 mm diameter unit
DC040B Series Salient Characteristics
US: +1 7 9 25 sia: +86 21 5763 58 Harleysville, P 438 DC SERO MOTORS BRUSH COMMUTTED DC MOTORS The DC4B series brush commutated DC motor is a 4 mm diameter unit offered in 6 lengths with continuous output
Tabela 1. Table 1 working slat. Spare parts. Rear-attached disc mower Z108/8 2,5m with swath spreader
1 2 12 2 1 2 1 1 2 21 2 2 2 0 2 11 2 1 1 2 2 1 1 1 Tabela 1 Table 1 working slat Table 1 Cat. No. or Standard Qty No. Part name Z/ 2.m Z/ Working slat set. Contains: tab.1. pos.: 1- /1-000 tab.2. pos.:
4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
Metal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
MOTORI PER VENTILATORI MOTORS FOR BLOWERS
MOTORI PER VENTILATORI MOTORS FOR BLOWERS LR 91167 FLANGIA TIPO A FLANGE TYPE A TIPO / TYPE A B C D E F G H I* L M N O P Q BM.80.A2.1000 315 250 290 20 225 φ 7 155 33 19 h7 114 84 6 21.5 M 8 3/8 BM.80.A2.1001
ΕΞΑΡΤΗΜΑΤΑ ΥΔΡΑΥΛΙΚΑ. Hydraulic Fittings. Threaded plastic accessories with both male, and female type thread for use in hydraulic networks.
ΕΞΑΡΤΗΜΑΤΑ ΥΔΡΑΥΛΙΚΑ Hydraulic Fittings Description: Threaded plastic accessories with both male, and female type thread for use in hydraulic networks. Range: From Ø 3/8" up to Ø 4". Pressure Rating: 10
Rod End > Spherical Bearings Product Overview
Rod End > Spherical Bearings Product Overview Table of Contents FMW3E_.4 / NSA8143 FMW3F_.4 / NSA8149 REM REF Page IV-3-4 IV-5-6 IV-7-8 IV-9-10 FMW3E_.4 / NSA8143 Rod End > Spherical Bearings Schematic
Rod End > Ball Bearings Product Overview
Product Overview Table of Contents EN4035 EN4036 FC...M / FCN...M ASNA2579E NSA8159 REP / RAP REP...F Page Il-3-4 Il-5-6 Il-7-8 Il-9-10 Il-11-12 Il-13-14 Il-15-16 EN4035 EN4035 L 06 P K A T Surface Treatment
High Performance Voltage Controlled Amplifiers Typical and Guaranteed Specifications 50 Ω System
High Performance Voltage Controlled Amplifiers Typical and Guaranteed Specifications 50 Ω System Typical and guaranteed specifications vary versus frequency; see detailed data sheets for specification
Technical Data for Profiles. α ( C) = 250 N/mm 2 (36,000 lb./in. 2 ) = 200 N/mm 2 (29,000 lb./in 2 ) A 5 = 10% A 10 = 8%
91 500 201 0/11 Aluminum raming Linear Motion and Assembly Technologies 1 Section : Engineering Data and Speciications Technical Data or Proiles Metric U.S. Equivalent Material designation according to
SMBJ SERIES. SMBG Plastic-Encapsulate Diodes. Transient Voltage Suppressor Diodes. Peak pulse current I PPM A with a 10/1000us waveform See Next Table
SMBJ SERIES SMBG Plastic-Encapsulate Diodes HD BK 7 Transient Suppressor Diodes Features P PP 6W V RWM 5.V- 44V Glass passivated chip Applications Clamping Marking SMBJ XXCA/XXA/XX XX : From 5. To 44 SMBG
RAC. Technical Data Book. RAC(Max Heat) for North America (R410A, 60Hz, HP) Model : AR09/12KSWSPWKNCV AR09/12KSWSPWKXCV
RAC Technical Data Book RAC(Max Heat) for North America (R410A, 60Hz, HP) Model : AR09/12KSWSPWKNCV AR09/12KSWSPWKXCV History Version Modification Date Remark Ver.1.0 Release RAC (Max Heat) TDB for North
MAX4147ESD PART 14 SO TOP VIEW. Maxim Integrated Products 1 MAX4147 EVALUATION KIT AVAILABLE ; Rev 1; 11/96 V CC V EE OUT+ IN+ R t SENSE IN-
-; Rev ; / EVALUATION KIT AVAILABLE µ µ PART ESD TEMP. RANGE - C to +5 C PPACKAGE SO TOP VIEW V EE V CC SENSE+ SENSE- R t R t R t R t MAX SENSE OUT SENSE+ SENSE- N.C. SHDN N.C. 3 5 R f R G R f 3 VDSL TRANSFORMER
+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
Surface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
17 Abbreviation Key and Index
17 17 Abbreviation key Abbreviation key 17 Abbreviation Key and Index 17.1 Abbreviation key α Application angle of the radial load f 1 Altitude factor (= correction factor for calculating the thermal rating
E62-TAB AC Series Features
NEW! E62-TAB AC Series Features Perfect for non-sinusoidal voltages and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated
Metal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
GenX3 TM 300V IGBT IXGA42N30C3 IXGH42N30C3 IXGP42N30C3 V CES = 300V I C110. = 42A V CE(sat) 1.85V t fi typ. = 65ns
GenX3 TM V IGBT High Speed PT IGBTs for -1kHz switching IXGA42NC3 IXGH42NC3 IXGP42NC3 V CES = V 1 = 42A V CE(sat) 5V t fi typ = 65ns TO-263 (IXGA) Symbol Test Conditions Maximum Ratings V CES = 25 C to
Thin Film Chip Resistors
FETURES PRECISE TOLERNCE ND TEMPERTURE COEFFICIENT EI STNDRD CSE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERLE (Pb FREE TERMINTION FINISH) RoHS Compliant includes all homogeneous
Aluminum Capacitors C, Tubular, Radial Lead
Aluminum Capacitors + 105 C, Tubular, Radial Lead FEATURES Wide temperature range Radial design in two and three lead configuration Ideal SMPS output filter PERFORMANCE CHARACTERISTICS Operating Temperature:
HORIZON QUANTUM. Logging
HORIZON QUANTUM High Capacity Packet Microwave System FEATURES NETWORK MANAGEMENT (NMS) Capacity w/accelerator Variable from 10 to 2000 Mbps full duplex CIR Management Access In or out of band 2x capacity
Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520. official distributor of
Product: Current Sensing Chip Resistor SMDL Series Size: 0201/0402/0603/0805/1206/1010/2010/2512/1225/3720/7520 official distributor of Current Sensing Chip Resistor (SMDL Series) 1. Features -3 Watts
OMS, OMT and OMV Orbital Motors. Technical Information
OMS, OMT and OMV Orbital Motors Technical Information OMS, OMT and OMV Wide Range of Orbital Motors Revision History Table of Revisions Date Page Changed Rev Nov 29 67 conversions, and layout adjusted
ED. 06/2013 ED. 07/2008 PART CATALOGUE APEX 10 TWO POST LIFT 0 / 19
ED.06/2013 ED.07/2008 PARTCATALOGUE APEX10 TWOPOSTLIFT 0/19 TAV.0 LIFT ED.06/13 1/19 TAV.0 LIFT ED.06/13 ITEM PART NO. DESCRIPTION QTY REMARK 1 Z23A110000 Power-side column assembly 1 2 Z23A120000 Off-side
NMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
HORIZONTAL MULTISTAGE CENTRIFUGAL ELECTRIC PUMPS in AISI 304
Horizontal multistage centrifugal electric pumps stainless steel. APPLICATIONS Industrial washing Pressure boosting units Industrial plants Distribution and treatment of water Heating and air conditioning
QUICKTRONIC PROFESSIONAL QTP5
osram.com QUICKTRONIC PROFESSIONA QTP5 ECG for T5/ 16mm, T8/ 26mm, DUUX fluorescent lamps QTP5 i.e. UMIUX T5 HO ES 01 Product Features: Up to 100.000 hours lifetime 1 amp start with optimized filament
PEH C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life
PEH 169 85 C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life APPLICATION BASIC DESIGN Smoothing, energy storage, or pulse operation in telecommunication
Homework 8 Model Solution Section
MATH 004 Homework Solution Homework 8 Model Solution Section 14.5 14.6. 14.5. Use the Chain Rule to find dz where z cosx + 4y), x 5t 4, y 1 t. dz dx + dy y sinx + 4y)0t + 4) sinx + 4y) 1t ) 0t + 4t ) sinx
SMD Transient Voltage Suppressors
SMD Transient Suppressors Feature Full range from 0 to 22 series. form 4 to 60V RMS ; 5.5 to 85Vdc High surge current ability Bidirectional clamping, high energy Fast response time
+85 C General Purpose Radial Lead Aluminum Electrolytic Capacitors
+85 C General Purpose Radial Lead Aluminum Electrolytic acitors Applications Filtering Coupling Bypass Features Standard case sizes RoHS compliant Multiple case sizes Lead free Operating Temperature Range
Thin Film Precision Chip Resistor (AR Series)
Construction D1 L (AR Series) Features -Advanced thin film technology -Very tight tolerance down to ±0.01% -Extremely low TCR down to ±5PPM/C -Wide resistance range 1ohm ~ 3Mega ohm -Miniature size 0201
[3.2] 38.0[4.3] [12.9] , [.71] [.00021].8[.09] 13.2[6.0] 230
![[3.2] 38.0[4.3] [12.9] , [.71] [.00021].8[.09] 13.2[6.0] 230](/thumbs/83/88943324.jpg "[3.2] 38.0[4.3] [12.9] , [.71] [.00021].8[.09] 13.2[6.0] 230")
Series TORQUE RANGE: 38-116.2 IN-LBS 4.3-13.1 Nm Motor Data (Trap) Motor Parameters Units 1140ATG**** 1140BTG**** 1141ATG**** 1141BTG**** *ontinuous Rated Torque @ Rated Speed *ontinuous Stall Torque ontinuous
Submittal Data Sheet Wilo Stratos Z - High Efficiency Domestic Hot Water Circulator
Wilo Stratos Z - High Efficiency Domestic Hot Water Circulator Stratos Z.x3- Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head Control Mode Cycle Phase Voltage
A31. Aluminium heat exchanger A31
Aluminium heat exchanger A A Before using the heat exchanger, carefully read the document entitled GENERAL OPERATING INSTRUCTIONS FOR HEAT EXCHANGER USE 98SAE7EN - 9-5-8 A V-V Dimensions ± 5 5 L MAX 99