Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping ratio and no follow-on current Meets MSL level, per J-STD-020 Operating Temperature:-40 ~ +85 Storage Temperature:-40 ~ +25 Safety certification: UL: E327997 CSA: 246579 VDE: 40027827 Applications Transistor, diode, IC, thyristor or triac semiconductor protection Surge protection in consumer electronics Surge protection in industrial electronics Surge protection in electronic home appliances, gas and petroleum appliances Relay and electromagnetic valve surge absorption Part Number Code Revision:27-Dec-5 / www.brightking.com
Dimensions Φ SERIES Table Table 2 Unit: mm Unit: mm Symbol Dimension Model T e Model T e H(±2.0) 3.0 80K 2.8.5 30K 3.9 2.5 H(±2.0) 5.5 220K 2.9.6 33K 3.9 2.5 L(min.) 20.0 270K 3..8 36K 4. 2.7 L(min.) 5.0 330K 3.0.7 39K 4.2 2.8 D ~2.5 390K 3..8 43K 4.4 3.0 F(±0.8) 7.5 470K 3.3.9 47K 4.6 3.2 T(±0.8) Table 2 560K 3.5 2. 5K 4.8 3.4 e(±0.8) Table 2 680K 3.8 2.4 56K 5.0 3.6 d(±0.05) 0.8 820K 3.2.8 62K 5.3 3.9 d(±0.4).4 K 3.4 2.0 68K 5.6 4.2 2K 3.6 2.2 75K 5.7 4.3 5K 3.2.8 78K 5.8 4.4 8K 3.3.9 82K 6.0 4.6 20K 3.4 2.0 9K 6.4 5.0 22K 3.5 2. 2K 6.4 5.0 24K 3.6 2.2 2K 6.8 5.4 27K 3.8 2.4 Revision:27-Dec-5 2 / www.brightking.com
Electrical Characteristics Φ SERIES Part Number Maximum Allowable Voltage Varistor Voltage Maximum Clamping Voltage Withstanding Surge Current Maximum Energy (/00μs) Rated Power Typical Capacitance (Reference) Standard High Surge V AC (V) V DC (V) V ma (V) I P (A) V C (V) I (A) Standard I (A) High Surge (J) Standard (J) High Surge (W) @KHz (pf) 80KD 80KDJ 4 8(5~2.6) 5 36 500 00 2. 3.0 0.05 5600 220KD 220KDJ 4 8 22(9.5~26) 5 43 500 00 2.5 5.0 0.05 4500 270KD 270KDJ 7 22 27(24~3) 5 53 500 00 3.0 6.0 0.05 3700 330KD 330KDJ 20 26 33(29.5~36.5) 5 65 500 00 4.0 7.0 0.05 3000 390KD 390KDJ 25 3 39(35~43) 5 77 500 00 4.6 9.0 0.05 2400 470KD 470KDJ 30 38 47(42~52) 5 93 500 00 5.5.0 0.05 20 560KD 560KDJ 35 45 56(50~62) 5 500 00 7.0 3.0 0.05 800 680KD 680KDJ 40 56 68(6~75) 5 35 500 00 8.2 5.0 0.05 500 820KD 820KDJ 50 65 82(74~90) 25 35 2500 3500 2.0 7.0 0.4 200 KD KDJ 60 85 0(90~) 25 65 2500 3500 5.0 8.0 0.4 00 2KD 2KDJ 75 0 20(8~32) 25 200 2500 3500 8.0 2.0 0.4 830 5KD 5KDJ 95 25 50(35~65) 25 250 2500 3500 22.0 25.0 0.4 670 8KD 8KDJ 5 50 80(62~98) 25 300 2500 3500 27.0 30.0 0.4 560 20KD 20KDJ 30 70 200(80~220) 25 340 2500 3500 30.0 35.0 0.4 500 22KD 22KDJ 40 80 220(98~242) 25 360 2500 3500 32.0 39.0 0.4 450 24KD 24KDJ 50 200 240(26~264) 25 395 2500 3500 35.0 42.0 0.4 420 27KD 27KDJ 75 225 270(243~297) 25 455 2500 3500 37.0 49.0 0.4 370 30KD 30KDJ 90 250 300(270~330) 25 500 2500 3500 40.0 54.0 0.4 330 33KD 33KDJ 2 275 330(297~363) 25 550 2500 3500 43.0 58.0 0.4 300 36KD 36KDJ 230 300 360(324~396) 25 595 2500 3500 47.0 65.0 0.4 280 39KD 39KDJ 250 320 390(35~429) 25 650 2500 3500 60.0 70.0 0.4 260 43KD 43KDJ 275 350 430(387~473) 25 7 2500 3500 65.0 80.0 0.4 230 47KD 47KDJ 300 385 470(423~57) 25 775 2500 3500 67.0 85.0 0.4 2 5KD 5KDJ 320 45 5(459~56) 25 845 2500 3500 69.0 90.0 0.4 200 56KD 56KDJ 350 460 560(504~66) 25 925 2500 3500 70.0 92.0 0.4 80 62KD 62KDJ 385 505 620(558~682) 25 25 2500 3500 72.0 95.0 0.4 60 68KD 68KDJ 420 560 680(62~748) 25 20 2500 3500 75.0 98.0 0.4 50 75KD 75KDJ 460 65 750(675~825) 25 240 2500 3500 77.0 0.0 0.4 30 78KD 78KDJ 485 640 780(702~858) 25 290 2500 3500 80.0 5.0 0.4 30 82KD 82KDJ 5 670 820(738~902) 25 355 2500 3500 85.0.0 0.4 20 9KD 9KDJ 550 745 9(89~0) 25 500 2500 3500 93.0 30.0 0.4 2KD 2KDJ 625 825 00(900~0) 25 650 2500 3500 2.0 40.0 0.4 0 2KD 2KDJ 680 895 0(990~2) 25 85 2500 3500 5.0 55.0 0.4 90 Notes:. The tolerance of varistor voltage between 8V and 27V is more than %. 2. Leakage Current (@83% of V ma ):IR 50μA (80K~680K) IR 25μA (820K~2K) Revision:27-Dec-5 3 / www.brightking.com
Electrical Ratings Φ SERIES Items Test Condition/Description Requirement Varistor Voltage The voltage between two terminals with the specified measuring current ma.dc applied is called Vb. Maximum Allowable Voltage The recommended maximum sine wave voltage (RMS) or the Maximum DC voltage can be applied continuously. The maximum voltage between two terminals with the specification standard impulse current. Applied waveform: 8/20μs Maximum Clamping Voltage To meet the Specified value Rated Wattage The maximum average power that can be applied within the specified ambient temperature. Energy The maximum energy within the varistor voltage change of ±% when one impulse of /00μs or 2ms is applied. Withstanding Surge Current The maximum current within the varistor voltage change of ±% with the standard impulse current (8/20μs) applied one time. Varistor Voltage Temp. Coefficient Vb at 20 Vb at 70 Vb at 20 50 0(%/ ) 0.05%/ max Surge Life The change of Vb shall be measured after the impulse listed below which is applied,000 times continuously with the interval of ten seconds at room temperature. 80K to 680K 50A (8/20μs) Φ series 820K to 2K 0A (8/20μs) Vb Vb ±% Revision:27-Dec-5 4 / www.brightking.com
Soldering Recommendation Φ SERIES Wave Lead Free Soldering Recommendation 300 250 Preheating Maximum Wave 265 Soldering Cooling 200 50 0 50 0 0 0.5.5 2 2.5 3 3.5 Time (minutes) 4 Item Conditions Peak Temperature 265 Dipping Time seconds (max.) Soldering time Recommendation Reworking Conditions with Soldering Iron Item Temperature of Soldering Iron-tip Soldering Time Distance from Varistor Conditions 360 (max.) 3 seconds (max.) 2mm (min.) Revision:27-Dec-5 5 / www.brightking.com
Maximum Surge Current Derating Curve Φ SERIES 000 80KD to 680KD 000 820KD to 75KD 00 0 2 2 3 4 5 6 00 0 2 2 3 4 5 6 0. 0 Td (μs) 00 000 0. 0 Td (μs) 00 000 000 00 0 2 2 3 4 5 6 820KDJ to 2KDJ 0. 0 Td (μs) 00 000 Revision:27-Dec-5 6 / www.brightking.com
and Curve Φ SERIES 80KD to 680KD 00 0 680KD 560KD 470KD 390KD 330KD 270KD 220KD 80KD -6-5 -4-3 -2-2 3 4 000 820KD to 47KD 00 0 47KD 43KD 39KD 36KD 33KD 30KD 27KD 24KD 22KD 20KD 8KD 5KD 2KD KD 820KD -6-5 -4-3 -2-2 3 4 5 Revision:27-Dec-5 7 / www.brightking.com
and Curve Φ SERIES 5KD to 2KD 000 00 2KD 2KD 9KD 82KD 78KD 75KD 68KD 62KD 56KD 5KD 0-6 -5-4 -3-2 - 2 3 4 5 80KDJ to 680KDJ 00 0 680KDJ 560KDJ 470KDJ 390KDJ 330KDJ 270KDJ 220KDJ 80KDJ -6-5 -4-3 -2-2 3 4 Revision:27-Dec-5 8 / www.brightking.com
and Curve Φ SERIES 820KDJ to 75KDJ 000 00 0 75KDJ 68KDJ 62KDJ 56KDJ 5KDJ 47KDJ 43KDJ 39KDJ 36KDJ 33KDJ 30KDJ 27KDJ 24KDJ 22KDJ 20KDJ 8KDJ 5KDJ 2KDJ KDJ 820KDJ -6-5 -4-3 -2-4 2 3 5 000 78KDJ to 2KDJ 2KDJ 2KDJ 9KDJ 82KDJ 78KDJ 00 0-6 -5-4 -3-2 - 4 2 3 5 Revision:27-Dec-5 9 / www.brightking.com
Φ SERIES Marking Code Brightking Logo 2 Varistor Voltage 2 3 4 5 XXXKDXXX Y VDE XXX H X 6 7 8 9 3 UL Accreditation Logo 4 CSA Accreditation Logo 5 VDE Accreditation Logo 6 J is High Surge Code, no J is Standard Surge 7 Disk Size 8 H is Halogen Free Code, no H is Halogen 9 Date Code Product Line Code ( Y may be A thru Z or blank) Taping Dimensions Symbol Dimension (mm) P 25.4±.0 P0 2.7±.0 P 8.95±0.7 P2 2.7±.3 F 7.5±0.8 h 0±2 W 8.0±.0 W0 2.0±.0 W 9.0±0.5 W2 3.0max H 20.0±2.0 I.0max D0 4.0±0.2 t 0.6±0.3 B 36max Revision:27-Dec-5 / www.brightking.com
Quantity Φ SERIES Packaging Dimensions (Unit: mm) Bulk Quantity 500pcs/bag 2bags/box (80K~62K) 400pcs/bag 2bags/box (68K~2K) Tape & Box 750pcs/box (80K~39K) 500pcs/box (43K~62K) 300pcs/box (68K~75K) Tape & Reel 00pcs/reel (80K~39K) 750pcs/reel (43K~62K) 500pcs/reel (68K~75K) Revision:27-Dec-5 / www.brightking.com