Digital motor protection relays Specification DMP -S & DMP -Sa DMP -T & DMP -Ta Model No. DMP06-S/Sa DMP60-S/Sa DMP06-T/Ta DMP60-T/Ta Wiring Screw type Tunnel type Panel mount Unit or Extension Note1) Operation time Select either reverse time characteristics or definite time characteristics Protection Over current According to the setting time Phase failure sec. Reverse phase Within 0.1 sec. Asymmetry 5 sec. Stall 5 sec. Lock Within 0.5 sec. Under current sec. Ground fault Within 0.05~1 sec. Selectable (0.05~1.0sec) Short circuit Note) Within 50ms Alarm Variable (60~110% of the setting current) Current setting range (A) 0.5~6 5~60 0.5~6 5~60 Motor capacity 0~0V 0.09~0.75 ~11 0.09~0.75 ~11 (kw) 80~0V 0.1~.~ 0.09~.~ settingdefinite Delay in starting0~60sec range (sec) time Delay in operating 0~0sec Inverse time 0~60sec Reset Manual reset ±5% (or±0.5sec) Operating power Voltage AC 190~50V Note) Frequency 60Hz (50Hz) Aux. contact OL -SPST A/50Vac Resistive load AL SPST A/50Vac Resistive load Over DC500V 100MΩ Surge impulse voltage(iec1000--5) 1. 50μs 6kV (Apply standard wave form) Fast transient burst(iec1000--).5kv/5min Environment Temperature Operation -5~70 Storage -0~80 Humidity 0~90% RH (No freezing) Display 7-Segment phase current, cause of a fault Bar-Graph 60~110% of real load current Mounting type 5mm Din-rail/Panel Note1) In extension type, the digital EMPR is calibrated with combining the display past and main body so, please cautious not to combine the display part and main body with different part No. Note) Instantaneous short circuit protection is optional Note) Operational voltage of AC 110V and 50Hz is optional 8
Electronic overload relays Specification Ratings Type Pin type Screw type Tunnel type No. of CT CT CT CT CT CT CT CT Protection Overcurrent Phase failure Note1) Stall Asymmetry Reverse phase (PR) (SR) (TR) Current setting range(a) 0.~ 1~5.~ Operating time characteristics Inverse time characteristics(gmp-pd: Definite time characteristics) settinginverse time 0~0 sec (sec) Definite D-time 0.~60 sec for GMP-PD O-time 5sec (Fixed) for GMP-PD ±5%(or±0.5sec) Control Voltage AC 110V/0V(±10%) AC 100~60V power Frequency 50/60Hz Aux. contact Contact 1SPDT(1c) Note) SPST(When power applied, 1a1b) Ratings 5A/50VAC Resistive load A/50VAC Resistive load Operate (95 96 Close) (95 96 Close) (97 98 Open) Min 100MΩ at 500Vdc Surge endurance(iec 1000--5) 1. 50μs 6kV Apply the standard wave Fast transient burst(iec 1000--).5kV/5min. Environment Operation -5~70 Temperature Storage -0~80 Relative humidity 0~90%RH(No freezing) Trip indicator Red LED Red/Green LED Red LED Red/Green LED Red LED Red/Green LED Dimension(mm) W H D 71 78 5 77.5 87.5 5 68 87.5 5 8 87.5 Mounting type Direct mount onto a MC Separate mount(screw or Din-rail) Note) Applied MC Certification Model GMP-P Note1) When it is CT model, only two-phase protection is available Note) 1a1b Aux. switch is optional in GMP -P model Note) The bracket for Din-rail mount is optional GMC-9, GMC-1, GMC-18, GMC- UL, cul, CE GMP-P(1a1b) GMP-P/PR GMP-S GMP- S/SR GMP-T GMP- T/TR 8
Ratings Model GMP0-P GMP0- P/PR GMP0-S GMP0- S/SR GMP0-T GMP80-S GMP0- T/TR GMP80- S/SR Type Pin type Screw type Tunnel type Screw type No. of CT CT CT CT CT CT CT CT CT Protection Overcurrent Phase failure Stall Asymmetry Reverse phase (PR) (SR) (TR) (SR) Current setting range(a) ~0 8~0 16~80 Operating time characteristics Inverse time characteristics Inverse time 0~0 sec settingreset time Manual reset (Prompt) (sec) Reset after 1 Min.(Optional) ±5%(or±0.5sec) Control Voltage AC 100~60V power Frequency 50/60Hz Aux. contact Contact SPST(When power applied, 1a1b) Ratings A/50VAC Resistive load Operate (95 96 Close) (97 98 Open) Min 100MΩ at 500Vdc Surge endurance(iec 1000--5) 1. 50μs 6kV Apply the standard wave Fast transient burst(iec 1000--).5kV/5min. Environment Operation -5~70 Temperature Storage -0~80 Relative humidity 0~90%RH((No freezing) Trip indicator Red LED Red/Green LED Red LED Red/Green LED Red LED Red/Green LED Red LED Red LEDs Dimension(mm) W H D 5 77.5 87.5 5 68 87.5 5 8 87.5 89 77.5 97. Mounting type Direct mount onto a MC Separate mount(screw or Din-rail) Direct/Separate mount (Screw or Din-rail ) Applied MC GMC-, GMC-0 GMC-50, GMC-65, GMC-75, GMC-85 Certification UL, cul, CE 8
Thermal overload relays Setting range selection guide Class 10A Three phase ( pole) motor max. power 0V kw 80V kw 15V kw 0V kw 550V kw 660V kw GTK- GTK-100 GTK-0 0.1~0.16 0 85 100 150 0 00 600 0.16~0. 0.7 0.5 0.5~0. 0.7 0.55 0.5 0.75 0.~0.6 0.7 0.55 0.75 0.5 0.75 1 0.6~1 0.7 0.75 0.5 1 1~1.6 0.75. 1 1.6~.5....5~ ~6.7.7 5 5 7.5 ~6 5~8 5~8 6~9. 7.5 7.5 10 6~9 7.5 10 7.5 7.5 7.5 101.5 9~1 9~1 7.5 9 9 1015 9~1 101 1 1.5 0 1~18 1~18 11 11 11 7.5 15 15 15 1~18 16~ 16~ 11 11 11 15 18.5 7.5 15 15 15 05 16~ 18~6 18~6 7.5 15 15 15 18.5 100005 0 ~6 ~6 15 18.5 05 8~0 8~0 11 5 5 07 15 05 5 050 ~50 ~50 ~50 15 5 007 5 05 005060 5~65 9~57 9~57 18.5 07 7 5 55 5 05050 6075 5~75 ~65 ~65 7 5 5 55 6 050606075 85 6~85 5~80 5~80 5 51 55 59 6 90 5 7075 80 85 15 70~100 059 59 6 80110 0808085 110150 85~15 85~15 85~15 85~15 5 8080901 019 6011011015 15 175 100~150 100~160 100~160 55 901 0110110160 75 15 15 1501500 10~180 10~180 6 11019 10 160 0 85 150175 190 070 160~0 160~0 80150160160 057 11005 007050 00~00 00~00 110185 0057 5 1505070 05055 60~00 60~00 18015 55 75 5 5 0 5 080510 580680 00~600 0 00 5 50 500 00 55 580 610 680 50~800 GMC(D)-9 GMC(D)- GMC(D)-50 GMC-100 GMC-150 GMC-180 GMC-00 GMC-600 GMC(D)-1 GMC(D)-0 GMC(D)-65 GMC-15 GMC-0 GMC-00 GMC-800 Applied contactors for direct starters GMC(D)-18 GMC(D)-75 GMC(D)- GMC(D)-85 80
Class 0 GTK-/L Three phase ( pole) motor max. power GTK- GTK- GTK- GTK- GTK- GTK- GTK- GTK- 0V kw 80V kw 15V kw 0V kw 550V kw 660V kw /L 0/L 85/L 100/L 150/L 0/L 00/L 600/L 0.7 0.75 0.75...7..7. 0.5 1 1 5 5 7.5 1~1.6 1.6~.5.5~ ~6 ~6 5~8 5~8 6~9 7.5 10 7.5 7.5 7.5 101.5. 7.5 7.5 10 6~9 9~1 9~1 7.5 9 9 1015 9~1 101 1 1.5 0 1~18 1~18 11 11 11 7.5 15 15 15 11 11 11 15 18.5 7.5 15 15 15 05 1~18 16~ 16~ 18~6 16~ 18~6 7.5 15 15 15 18.5 100005 0 ~6 ~6 15 18.5 05 8~0 8~0 11 5 5 07 15 05 5 050 15 5 007 5 05 005060 18.5 07 7 5 55 5 05050 6075 7 5 5 55 6 050606075 85 ~50 5~65 5~75 6~85 ~50 9~57 ~65 5~80 ~50 9~57 ~65 5~80 5 51 55 59 6 90 5 7075 80 85 15 059 59 6 80110 0808085 110150 5 8080901 019 6011011015 15 175 55 901 0110110160 75 15 15 1501500 6 11019 10 160 0 85 150175 190 070 85~15 85~15 100~150 85~15 100~160 10~180 160~0 85~15 100~160 10~180 160~0 80150160160 057 11005 007050 110185 0057 5 1505070 05055 18015 55 75 5 5 0 5 080510 580680 00~00 60~00 00~00 60~00 00~600 0 00 5 50 500 00 55 580 610 680 50~800 GMC(D)-9 GMC(D)- GMC(D)-50 GMC-100 GMC-150 GMC-180 GMC-00 GMC-600 GMC(D)-1 GMC(D)-0 GMC(D)-65 GMC-15 GMC-0 GMC-00 GMC-800 Applied contactors for direct starters GMC(D)-18 GMC(D)-75 GMC(D)- GMC(D)-85 Ratings of auxiliary contacts GTK-0/L GTK-0/L Rated current(a) Type AC15 DC1 110V 0V 550V 110V 0V, 0, 85.5(0.) (0.) 1(0.) 0.8(0.8) 0.1(0.1) 15, 150, 0, 00, 600.5(0.) (0.) 1(0.) 0.8(0.8) 0.1(0.1) Note) Values of ( ) are the ratings of NO contact under auto reset mode. 81