2013 REV 01 ELECTRONICS CAPACITORS. DC Applications Metallized Polypropylene Film Self Healing
|
|
|
- Κέφαλος Ἕκτωρ Καλύβας
- 7 χρόνια πριν
- Προβολές:
Transcript
1 2013 REV 01 POWER EECTRONICS CAPACITORS C Applications Metallized Polypropylene Film Healing
2 OUR MISSION:
3 POWER EECTRONICS AN SPECIA CAPACITORS M.V. PFC CAPACITORS AN BANKS IGHTING CAPACITORS MOTOR RUN CAPACITORS POWER CAPACITORS AN PFC CONTROERS PFC SISTEMS AN HARMONIC FITERS VOTAGE STABIISERS TRANSFORMERS AN CHOKES
4 SEECTION RUES VOTAGE CURRENT harmonic spectrum ( Arms ) Maximum working frequency Frequency ( Hz ) THERMA CHECK WARNING
5 Voltage Ripple voltage Rated voltage UN 1/f c voltage Time The maximum allowed rms ripple voltage has to be lower than 10% of the rated voltage UN (max 150Vrms)
6 Ratings U Approval Application Environmental conditions Operating temperature Storage temperature Environmental Compatibility Protection against accidental contact Humidity class ischarge esign Case material and resin Type of protection Assembly/Cooling
7 Overvoltages according to IEC Overvoltage 1,1 x U N 1,15 x U N 1,2 x U N 1,3 x U N 1,5 x U N Mounting position Storage and handling Failure criteria Routine dielectric tests Risk of Esplosion and Fire Reference standard Maintenance Two weeks after installation Periodically* (at least every year) conditions ( for instance, in a polluted environment cleaning should be more frequent ) and to the total safety requirement of the whole equipment where they are installed.
8 Theoretical expected life time vs voltage and hot spot temperature
9 THE EFFECTIVE WAY TO REPACE EECTROYTIC CAPACITORS NK SERIES C INK CAPACITORS KEY POINTS AVANTAGES OF NK CAPACITORS AGAINST EECTROITYC CAPACITORS A typical industrial converter Electrolytic Capacitors Polypropylene film capacitors in most cases they are able to replace favourably electrolytic capacitors
10 Rated C Voltage Un (V)
11 In accordance to UNI CEI Rated C Voltage U N (V) Voltage U S (V) s (nh) Thermal resistance with natural cooling NK-P1X ,40 12, ,15 49 NK-P1X ,70 12, ,15 49 NK-P1X ,80 12, ,15 49 NK-P1X ,90 12, ,15 49 NK-P1X ,28 12, ,15 49 NK-P1X ,00 12, ,15 49 NK-P1X-7, , ,25 12, ,15 49 Creepage between terminals Clearence In case of doubt regarding the full current maximum working frequency, please contact ICAR Tech. ept. for de-rating according to current spectrum Maximum hot spot temperature: 85 C I max has been calculated for a thermal rise h 0
12 In accordance to UNI CEI Rated C Voltage U N (V) Voltage U S (V) s (nh) Thermal resistance with natural cooling Full current Max Working Frequency Creepage between terminals Clearence Fixing feet NK-P2X <30 0, ,45 16 NK-P2X <30 0, ,45 16 NK-P2X <30 0, ,45 16 NK-P2X <30 0, ,45 16 NK-P2X <30 0, ,45 16 NK-P2X <30 0, ,45 16 NK-P2X < ,45 16 In case of doubt regarding the full current maximum working frequency, please contact ICAR Tech. ept. for de-rating according to current spectrum Maximum hot spot temperature: 85 C N I max has been calculated for a thermal rise h 0
13 In accordance to UNI CEI Rated C Voltage U N (V) Voltage U S (V) s (nh) Thermal resistance with natural cooling Full current Max Working Frequency Creepage between terminals Clearence Fixing feet NK-P2Z <30 0, ,45 16 NK-P2Z <30 0, ,45 16 NK-P2Z <30 0, ,45 16 NK-P2Z <30 0, ,45 16 NK-P2Z <30 0, ,45 16 NK-P2Z <30 0, ,45 16 NK-P2Z < ,45 16 In case of doubt regarding the full current maximum working frequency, please contact ICAR Tech. ept. for de-rating according to current spectrum Maximum hot spot temperature: 85 C N I max has been calculated for a thermal rise h 0
14 In accordance to UNI CEI Rated C Voltage U N (V) Voltage U S (V) s (nh) Thermal resistance with natural cooling Full current Max Working Frequency Creepage between terminals Clearence Fixing feet NK-P , ,55 16 NK-P ,1 8, ,55 16 NK-P ,3 8, ,55 16 NK-P ,5 8, ,55 16 NK-P ,6 8, ,55 16 NK-P , ,55 16 In case of doubt regarding the full current maximum working frequency, please contact ICAR Tech. ept. for de-rating according to current spectrum Maximum hot spot temperature: 85 C N I max has been calculated for a thermal rise h 0
15 In accordance to UNI CEI Rated C Voltage U N (V) Voltage U S (V) s (nh) Thermal resistance with natural cooling Full current Max Working Frequency Creepage between terminals Clearence Fixing feet NK-P2T , ,55 16 NK-P2T ,1 8, ,55 16 NK-P2T ,3 8, ,55 16 NK-P2T ,5 8, ,55 16 NK-P2T ,6 8, ,55 16 NK-P2T , ,55 16 In case of doubt regarding the full current maximum working frequency, please contact ICAR Tech. ept. for de-rating according to current spectrum Maximum hot spot temperature: 85 C N I max has been calculated for a thermal rise h 0
16 In accordance to UNI CEI Creepage Clearence Screw terminals d terminals ,5 M ,5 M ,5 M ,5 M Rated C Voltage U N (V) Voltage U S (V) s (nh) Thermal resistance with natural cooling Full current Max Working Frequency NK-P3X ,3 6,1 5 0,5 60* NK-P3X ,7 5,8 5 0, NK-P3X ,1 5,9 5 0,
17 Rated C Voltage U N (V) Voltage U S (V) s (nh) Thermal resistance with natural cooling Full current Max Working Frequency NK-P3X ,0 5,8 5 0, NK-P3X ,4 5,7 5 0, NK-P3X ,6 5,5 5 1, NK-P3X ,6 5,5 5 1, NK-P3X ,7 6,1 5 0,5 60* NK-P3X ,3 5,8 5 0, NK-P3X ,3 5,9 5 0, NK-P3X ,2 5,8 5 0, NK-P3X ,9 5,5 5 1, NK-P3X ,5 5,7 5 0, NK-P3X ,7 5,5 5 1, NK-P3X ,3 5,8 5 0, NK-P3X ,0 5,5 5 1, NK-P3X ,5 6,1 5 0,5 60* NK-P3X ,3 5,8 5 0, NK-P3X ,8 5,9 5 0, NK-P3X ,8 5,8 5 0, NK-P3X ,2 5,5 5 1, NK-P3X ,9 5,7 5 0, NK-P3X ,0 5,5 5 1, NK-P3X ,8 5,8 5 0, NK-P3X ,5 5,5 5 1, NK-P3X ,0 6,1 5 0,5 60* NK-P3X ,6 5,9 5 0, NK-P3X ,5 5,8 5 0, NK-P3X ,4 5,7 5 0, NK-P3X ,4 5,5 5 1, NK-P3X ,6 5,8 5 0, NK-P3X ,7 5,5 5 1, NK-P3X ,6 5,8 5 0, NK-P3X ,3 5,5 5 1, In case of doubt regarding the full current maximum working frequency, please contact ICAR Tech. ept. for de-rating according to current spectrum Maximum hot spot temperature: 85 C N I max has been calculated for a thermal rise h 0
18 In accordance to UNI CEI Rated C Voltage U N (V) Voltage U S (V) s (nh) Thermal with natural cooling Full current Max Working Frequency Creepage Between Terminals Clearence Fixing feet NK-P4X <30 0,62 2, ,2 4 NK-P4X <30 0,5 2, ,2 4 NK-P4X <30 0,65 2, ,2 4 NK-P4X <30 0,6 2, ,2 4
19 Rated C Voltage U N (V) Voltage U S (V) s (nh) Thermal with natural cooling Full current Max Working Frequency NK-P4X <30 0,80 2, ,2 4 NK-P4X <30 0,7 2, ,2 4 NK-P4X <30 0,90 2, ,2 4 NK-P4X <30 0,8 2, ,2 4 NK-P4X <30 0,95 2, ,2 4 NK-P4X <30 0,9 2, ,2 4 NK-P4X <30 1,10 2, ,2 4 NK-P4X <30 1,1 2, ,2 4 NK-P4X <30 1,40 2, ,2 4 NK-P4X <30 0,7 2, ,2 4 NK-P4X <30 0,90 2, ,2 4 NK-P4X <30 1,10 2, ,2 4 NK-P4X <30 2,85 2, ,2 4 NK-P4X <30 3,25 2, ,2 4 NK-P4X <30 4,5 2, ,2 4 NK-P4X <30 4,05 2, ,2 4 Creepage Between Terminals Clearence Fixing feet In case of doubt regarding the full current maximum working frequency, please contact ICAR Tech. ept. for de-rating according to current spectrum Maximum hot spot temperature: 85 C N I max has been calculated for a thermal rise h 0
20 In accordance to UNI CEI Terminals selection M3R M6 threaded holes M3S M8 threaded holes M3T M6 screw terminals M3U M8 screw terminals 1 a Creepage between terminals Clearence Terminal Screw or Threaded hole terminals M6/M M6/M8 10 6/ M6/M8 10 6/8
21 U N: 700V U s: 1050V NK-M ,65 6,2 10 0, NK-M ,75 5,3 10 1, NK-M ,90 4,6 10 1, NK-M ,30 3,7 10 1, NK-M ,40 4,3 10 1, NK-M ,45 3,7 10 1, NK-M ,50 3,3 10 2, NK-M ,70 2,7 10 2, NK-M ,75 2,5 10 2, NK-M ,75 2,2 10 3, U N: 900V U s: 1350V NK-M ,70 6,2 10 0, NK-M ,80 5,3 10 1, NK-M ,95 4,6 10 1, NK-M ,40 3,7 10 1, NK-M ,40 4,3 10 1, NK-M ,45 3,7 10 1, NK-M ,55 3,3 10 2, NK-M ,75 2,7 10 2, NK-M ,78 2,5 10 2, NK-M ,78 2,2 10 3, In case of doubt regading the full current maximun working frequency, please contact ICAR Tech. ept. for de-rating according to current spectrum Maximum hot spot temperature for diameter 85mm: 85 C Maximum hot spot temperature for diameter 116mm: 80 C N N for 10 s I max has been calculated for a thermal rise h 0
22 U N : 1100V U s : 1650V NK-M ,75 6,2 10 0, NK-M ,90 5,3 10 1, NK-M ,05 4,6 10 1, NK-M ,55 3,7 10 1, NK-M ,45 4,3 10 1, NK-M ,50 3,7 10 1, NK-M ,58 3,3 10 2, NK-M ,85 2,7 10 2, NK-M ,85 2,5 10 2, NK-M ,85 2,2 10 3, U N: 1300V U s: 1950V NK-M ,85 6,2 10 0, NK-M ,05 5,3 10 1, NK-M ,25 4,6 10 1, NK-M ,80 3,7 10 1, NK-M ,50 4,3 10 1, NK-M ,55 3,7 10 1, NK-M ,65 3,3 10 2, NK-M ,95 2,7 10 2, NK-M ,00 2,5 10 2, NK-M ,00 2,2 10 3, In case of doubt regading the full current maximun working frequency, please contact ICAR Tech. ept. for de-rating according to current spectrum Maximum hot spot temperature for diameter 85mm: 85 C Maximum hot spot temperature for diameter 116mm: 80 C N N for 10 s I max has been calculated for a thermal rise h 0
23 U N : 1650V U s : 2475V NK-M ,00 6,2 10 0, NK-M ,20 5,3 10 1, NK-M ,45 4,6 10 1, NK-M ,15 3,7 10 1, NK-M ,55 4,3 10 1, NK-M ,65 3,7 10 1, NK-M ,75 3,3 10 2, NK-M ,10 2,7 10 2, NK-M ,15 2,5 10 2, NK-M ,15 2,2 10 3, U N: 1850V U s: 2780V NK-M ,10 6,2 10 0, NK-M ,35 5,3 10 1, NK-M ,60 4,6 10 1, NK-M ,40 3,7 10 1, NK-M ,60 4,3 10 1, NK-M ,75 3,7 10 1, NK-M ,85 3,3 10 2, NK-M ,25 2,7 10 2, NK-M ,30 2,5 10 2, NK-M ,30 2,2 10 3, In case of doubt regading the full current maximun working frequency, please contact ICAR Tech. ept. for de-rating according to current spectrum Maximum hot spot temperature for diameter 85mm: 85 C Maximum hot spot temperature for diameter 116mm: 80 C N N for 10 s I max has been calculated for a thermal rise h 0
24 U N : 700V U s : 1050V NK-M ,35 7,7 10 0, NK-M ,05 6,4 10 0, NK-M ,15 6,0 10 0, NK-M ,10 5,5 10 1, NK-M ,10 4,5 10 1, NK-M ,15 4,2 10 1, NK-M ,15 3,8 10 1, U N: 900V U s: 1350V NK-M ,45 7,7 10 0, NK-M ,20 6,4 10 0, NK-M ,30 6,0 10 0, NK-M ,25 5,5 10 1, NK-M ,15 4,5 10 1, NK-M ,25 4,2 10 1, NK-M ,25 3,8 10 1, U N: 1100V U s: 1650V NK-M ,65 7,7 10 0, NK-M ,55 6,4 10 0, NK-M ,60 6,0 10 0, NK-M ,60 5,5 10 1, NK-M ,35 4,5 10 1, NK-M ,45 4,2 10 1, NK-M ,40 3,8 10 1, In case of doubt regading the full current maximun working frequency, please contact ICAR Tech. ept. for de-rating according to current spectrum Maximum hot spot temperature for diameter 85mm: 85 C Maximum hot spot temperature for diameter 116mm: 80 C N N for 10 s I max has been calculated for a thermal rise h 0
25 U N : 1300V U s : 1950V NK-M ,95 7,7 10 0, NK-M ,05 6,4 10 0, NK-M ,20 6,0 10 0, NK-M ,10 5,5 10 1, NK-M ,60 4,5 10 1, NK-M ,70 4,2 10 1, NK-M ,65 3,8 10 1, U N: 1650V U s: 2475V NK-M ,35 7,7 10 0, NK-M ,65 6,4 10 0, NK-M ,85 6,0 10 0, NK-M ,75 5,5 10 1, NK-M ,95 4,5 10 1, NK-M ,05 4,2 10 1, NK-M ,95 3,8 10 1, U N: 1850V U s: 2780V NK-M ,65 7,7 10 0, NK-M ,15 6,4 10 0, NK-M ,40 6,0 10 0, NK-M ,25 5,5 10 1, NK-M ,15 4,5 10 1, NK-M ,30 4,2 10 1, NK-M ,25 3,8 10 1, In case of doubt regading the full current maximun working frequency, please contact ICAR Tech. ept. for de-rating according to current spectrum Maximum hot spot temperature for diameter 85mm: 85 C Maximum hot spot temperature for diameter 116mm: 80 C N N for 10 s I max has been calculated for a thermal rise h 0
26 In accordance to UNI CEI Terminals selection diameter 116 M2R M6 threaded holes M2S M8 threaded holes M2T M6 screw terminals M2U M8 screw terminals Terminals selection diameter 85 M2R M6 threaded holes a d1 Creepage between terminals Clearence Terminal d M6/M8 screw and threaded holes M6 threaded holes terminals M6/M8 10 6/8 10 6
27 U N: 700V U s: 1050V NK-M ,65 6,2 10 0, NK-M ,80 5,3 10 1, NK-M ,95 4,6 10 1, NK-M ,35 3,7 10 1, NK-M ,40 4,3 10 1, NK-M ,45 3,7 10 1, NK-M ,50 3,3 10 2, NK-M ,70 2,7 10 2, NK-M ,75 2,5 10 2, NK-M ,75 2,2 10 3, U N: 900V U s: 1350V NK-M ,70 6,2 10 0, NK-M ,85 5,3 10 1, NK-M ,00 4,6 10 1, NK-M ,45 3,7 10 1, NK-M ,40 4,3 10 1, NK-M ,45 3,7 10 1, NK-M ,55 3,3 10 2, NK-M ,75 2,7 10 2, NK-M ,80 2,5 10 2, NK-M ,80 2,2 10 3, In case of doubt regading the full current maximun working frequency, please contact ICAR Tech. ept. for de-rating according to current spectrum Maximum hot spot temperature for diameter 85mm: 85 C Maximum hot spot temperature for diameter 116mm: 80 C N I max has been calculated for a thermal rise h 0
28 U N : 1100V U s : 1650V NK-M ,78 6,2 10 0, NK-M ,95 5,3 10 1, NK-M ,10 4,6 10 1, NK-M ,60 3,7 10 1, NK-M ,45 4,3 10 1, NK-M ,50 3,7 10 1, NK-M ,60 3,3 10 2, NK-M ,85 2,7 10 2, NK-M ,90 2,5 10 2, NK-M ,90 2,2 10 3, U N: 1300V U s: 1950V NK-M ,90 6,2 10 0, NK-M ,05 5,3 10 1, NK-M ,25 4,6 10 1, NK-M ,85 3,7 10 1, NK-M ,50 4,3 10 1, NK-M ,60 3,7 10 1, NK-M ,70 3,3 10 2, NK-M ,00 2,7 10 2, NK-M ,05 2,5 10 2, NK-M ,05 2,2 10 3, In case of doubt regading the full current maximun working frequency, please contact ICAR Tech. ept. for de-rating according to current spectrum Maximum hot spot temperature for diameter 85mm: 85 C Maximum hot spot temperature for diameter 116mm: 80 C N N for 10 s I max has been calculated for a thermal rise h 0
29 U N : 1650V U s : 2475V NK-M ,05 6,2 10 0, NK-M ,25 5,3 10 1, NK-M ,45 4,6 10 1, NK-M ,25 3,7 10 1, NK-M ,55 4,3 10 1, NK-M ,65 3,7 10 1, NK-M ,80 3,3 10 2, NK-M ,15 2,7 10 2, NK-M ,20 2,5 10 2, NK-M ,20 2,2 10 3, U N: 1850V U s: 2780V NK-M ,15 6,2 10 0, NK-M ,40 5,3 10 1, NK-M ,65 4,6 10 1, NK-M ,50 3,7 10 1, NK-M ,65 4,3 10 1, NK-M ,75 3,7 10 1, NK-M ,85 3,3 10 2, NK-M ,30 2,7 10 2, NK-M ,35 2,5 10 2, NK-M ,35 2,2 10 3, In case of doubt regading the full current maximun working frequency, please contact ICAR Tech. ept. for de-rating according to current spectrum Maximum hot spot temperature for diameter 85mm: 85 C Maximum hot spot temperature for diameter 116mm: 80 C N I max has been calculated for a thermal rise h 0
30 U N: 700V U V: 1050V NK-M ,10 6,4 10 0, NK-M ,25 6,0 10 0, NK-M ,20 5,5 10 1, NK-M ,15 4,5 10 1, NK-M ,20 4,2 10 1, NK-M ,15 3,8 10 1, U N: 900V U V: 1350V NK-M ,25 6,4 10 0, NK-M ,40 6,0 10 0, NK-M ,35 5,5 10 1, NK-M ,20 4,5 10 1, NK-M ,30 4,2 10 1, NK-M ,25 3,8 10 1, U N: 1100V U V: 1650V NK-M ,60 6,4 10 0, NK-M ,70 6,0 10 0, NK-M ,70 5,5 10 1, NK-M ,40 4,5 10 1, NK-M ,45 4,2 10 1, NK-M ,45 3,8 10 1, In case of doubt regading the full current maximun working frequency, please contact ICAR Tech. ept. for de-rating according to current spectrum Maximum hot spot temperature for diameter 85mm: 85 C Maximum hot spot temperature for diameter 116mm: 80 C N N for 10 s I max has been calculated for a thermal rise h 0
31 U N: 1300V U V: 1950V NK-M ,15 6,4 10 0, NK-M ,30 6,0 10 0, NK-M ,25 5,5 10 1, NK-M ,65 4,5 10 1, NK-M ,75 4,2 10 1, NK-M ,70 3,8 10 1, U N: 1650V U V: 2475V NK-M ,80 6,4 10 0, NK-M ,00 6,0 10 0, NK-M ,90 5,5 10 1, NK-M ,00 4,5 10 1, NK-M ,10 4,2 10 1, NK-M ,05 3,8 10 1, U N: 1850V U V: 2780V NK-M ,35 6,4 10 0, NK-M ,55 6,0 10 0, NK-M ,45 5,5 10 1, NK-M ,25 4,5 10 1, NK-M ,35 4,2 10 1, NK-M ,30 3,8 10 1, In case of doubt regading the full current maximun working frequency, please contact ICAR Tech. ept. for de-rating according to current spectrum Maximum hot spot temperature for diameter 85mm: 85 C Maximum hot spot temperature for diameter 116mm: 80 C N N for 10 s I max has been calculated for a thermal rise h 0
32 Terminals for U N Terminals for U N In accordance to UNI CEI
33 Rated C Voltage U N (V) Voltage U S (V) Thermal resistance with natural cooling Full current Max Working Frequency Creepage between terminals Clearence Fixing feet NK-P5X <30 0,20 1, NK-P5X <30 0,14 1, NK-P5X <30 0,22 1, NK-P5X <30 0,18 1, NK-P5X <30 0,25 1, NK-P5X <30 0,19 1, NK-P5X <30 0,21 1, NK-P5X <30 0,30 1, NK-P5X <30 0,24 1, NK-P5X <30 0,35 1, NK-P5X <30 0,28 1, NK-P5X <30 0,31 1, NK-P5X <30 0,38 1, NK-P5X <30 0,34 1, NK-P5X <30 0,40 1, NK-P5X <30 0,19 1, NK-P5X <30 0,28 1, NK-P5X <30 0,21 1, NK-P5X <30 0,23 1, NK-P5X <30 0,32 1, NK-P5X <30 0,27 1, NK-P5X <30 0,36 1, NK-P5X <30 0,3 1, NK-P5X <30 0,36 1, NK-P5X <30 0,45 1, In case of doubt regarding the full current maximum working frequency, please contact ICAR Tech. ept. for de-rating according to current spectrum Maximum hot spot temperature: 85 C N I max has been calculated for a thermal rise h 0
34 In accordance to UNI CEI Rated C Voltage U N (V) Voltage U S (V) Thermal resistance with natural cooling Full current Max Working Frequency NK-P6X ,7 7, ,27 M NK-P6X ,5 7, ,41 M NK-P6X ,4 6, ,47 M NK-P6X , ,27 M NK-P6X ,7 7, ,41 M NK-P6X ,5 6, ,47 M NK-P6X ,3 7, ,27 M NK-P6X ,9 7, ,41 M NK-P6X ,6 6, ,47 M NK-P6X ,6 7, ,27 M NK-P6X ,1 7, ,41 M NK-P6X ,8 6, ,47 M NK-P6X ,6 7, ,27 M NK-P6X ,1 7, ,41 M NK-P6X ,8 6, ,47 M NK-P6X ,7 7, ,27 M NK-P6X ,3 7, ,41 M NK-P6X , ,47 M In case of doubt regarding the full current maximum working frequency, please contact ICAR Tech. ept. for de-rating according to current spectrum Maximum hot spot temperature: 85 C N I max has been calculated for a thermal rise h 0 d
35 In accordance to UNI CEI Rated C Voltage U N (V) Voltage U S (V) Thermal resistance with natural cooling Full current Max Working Frequency Creepage between terminals Clearence Fixing feet NK-P7X ,22 4, ,8 8 NK-P7X ,28 4, ,8 8 NK-P7X ,32 4, ,8 8 NK-P7X ,35 4, ,8 8 NK-P7X ,38 4, ,8 8 NK-P7X ,44 4, ,8 8 NK-P7X ,53 4, ,8 8 In case of doubt regarding the full current maximum working frequency, please contact ICAR Tech. ept. for de-rating according to current spectrum Maximum hot spot temperature: 85 C N I max has been calculated for a thermal rise h 0
36 In accordance to UNI CEI Rated C Voltage U N (V) Voltage U S (V) Thermal resistance with natural cooling Full current Max Working Frequency Creepage between terminals Clearence Fixing feet NK-P8X ,22 3, ,8 6 NK-P8X ,27 3, ,8 6 NK-P8X ,30 3, ,8 6 NK-P8X ,31 3, ,8 6 NK-P8X ,36 3, ,8 6 NK-P8X ,40 3, ,8 6 NK-P8X ,51 3, ,8 6 In case of doubt regarding the full current maximum working frequency, please contact ICAR Tech. ept. for de-rating according to current spectrum Maximum hot spot temperature: 85 C N I max has been calculated for a thermal rise h 0
37 In accordance to UNI CEI Rated C Voltage U N (V) Voltage U S (V) Thermal resistance with natural cooling Full current Max Working Frequency Creepage between terminals Clearence Fixing feet NK-P9X <30 0,32 2, ,5 4 NK-P9X <30 0,41 2, ,5 4 NK-P9X <30 0,46 2, ,5 4 NK-P9X <30 0,46 2, ,5 4 NK-P9X <30 0,56 2, ,5 4 NK-P9X <30 0,63 2, ,5 4 NK-P9X <30 0,71 2, ,5 4 NK-P9X <30 0,79 2, ,5 4 NK-P9X <30 0,27 2, ,5 4 NK-P9X <30 0,28 2, ,5 4 NK-P9X <30 0,30 2, ,5 4 NK-P9X <30 0,38 2, ,5 4 NK-P9X <30 0,38 2, ,5 4 NK-P9X <30 0,41 2, ,5 4 In case of doubt regarding the full current maximum working frequency, please contact ICAR Tech. ept. for de-rating according to current spectrum Maximum hot spot temperature: 85 C N I max has been calculated for a thermal rise h 0
38 Custom capacitors for C link are grouped as follows: NK-P NK-M BIOENERGY-65
Type 947D Polypropylene, High Energy Density, DC Link Capacitors
Type 947D series uses the most advanced metallized film technology for long life and high reliability in DC Link applications. This series combines high capacitance and very high ripple current capability
Aluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Aluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
C4C-C4H-C4G-C4M MKP Series AXIAL CAPACITORS PCB APPLICATIONS
C4C-C4H-C4G-C4M AXIAL CAPACITORS PCB APPLICATIONS General characteristics - Self-Healing - Low losses - High ripple current - High contact reliability - Suitable for high frequency applications 40 ±5 L
PPA Metallized polypropylene film capacitor MKP - Snubber/pulse - High current
Main applications Snubber capacitor for energy conversion and control in power semiconductor circuits, protection circuits in SMPSs, induction heaters, high voltage, high current and high pulse applications
E62-TAB AC Series Features
NEW! E62-TAB AC Series Features Perfect for non-sinusoidal voltages and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated
E62 AC Series Features
E62 AC Features Perfect for non-sinusoidal s and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated overpressure
RSDW08 & RDDW08 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (Typ.) CAPACITOR LOAD (MAX.) RSDW08F-03 344mA 3.3V 2000mA 80% 2000μF RSDW08F-05
15W DIN Rail Type DC-DC Converter. DDR-15 series. File Name:DDR-15-SPEC
DIN Rail Type DC-DC Converter ± : DIN Rail Type DC-DC Converter SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC (Note 5) OTHERS DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE
Type CGS High-Cap Screw Terminal Aluminum Electrolytic Capacitor
High CV, Screw Terminal Capacitors Specifications Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature: Ripple Current Multipliers: Type CGS screw terminal, aluminum electrolytic
Surface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
15W DIN Rail Type DC-DC Converter. DDR-15 s e r i e s. File Name:DDR-15-SPEC
DIN Rail Type DC-DC Converter ± : DIN Rail Type DC-DC Converter SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC (Note 5) OTHERS NOTE DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER
Bulletin 1489 UL489 Circuit Breakers
Bulletin 489 UL489 Circuit Breakers Tech Data 489-A Standard AC Circuit Breaker 489-D DC Circuit Breaker 489-A, AC Circuit Breakers 489-D, DC Circuit Breakers Bulletin 489-A Industrial Circuit Breaker
+85 C Screw Terminal Aluminum Electrolytic Capacitors. For filtering applications. Capacitance change Dissipation factor Leakage current
For filtering applications FEATURES High ripple current High reiability range: 270µF to 680,000µF Voltage range: 6.3 to 450 SPECIFICATIONS Tolerance ±20% at 120 Hz, 25 C Operating Temperature Range Dissipation
Terminal Contact UL Insulation Designation (provided with) style form system approval Flux tight
eatures A miniature PCB Power Relay. form A contact configuration with quick terminal type. 5KV dielectric strength, K surge voltage between coils to contact. Ideal for high rating Home Appliances of heating
+85 C Snap-Mount Aluminum Electrolytic Capacitors. High Voltage Lead free Leads Rugged Design. -40 C to +85 C
+85 C Snap-Mount Capacitors FEATURES High ripple Current Ratings Large Case Size Selection Extended Life High Voltage Lead free Leads Rugged Design SPECIFICATIONS Tolerance ±20% at 120Hz, 20 C Operating
THICK FILM LEAD FREE CHIP RESISTORS
Features Suitable for lead free soldering. Compatible with flow and reflow soldering Applications Consumer Electronics Automotive industry Computer Measurement instrument Electronic watch and camera Configuration
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
LPFH-60 series. 60W Constant Voltage + Constant Current LED Driver IP67. File Name:LPFH-60-SPEC
W Constant Voltage + Constant Current LED Driver LPFH- series IP67 ~ File Name:LPFH--SPEC 2016-10-25 SPECIFICATION MODEL DC VOLTAGE CONSTANT CURRENT REGION Note.2 LPFH--12 12V 7.2 ~12V LPFH--15 15V 9 ~
Metal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
+85 C General Purpose Radial Lead Aluminum Electrolytic Capacitors
+85 C General Purpose Radial Lead Aluminum Electrolytic acitors Applications Filtering Coupling Bypass Features Standard case sizes RoHS compliant Multiple case sizes Lead free Operating Temperature Range
± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:
![± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:](/thumbs/85/91419422.jpg "± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:")
TS-UP Series 85 C, 3000 hours Compact size for general purpose and industrial applications 2 and 3 pin versions available 20mm lengths for low profile applications RoHS Compliant Rated Working Voltage:
Multilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Aerovox Corp. Type H High Voltage AC & DC Capacitors. Film Capacitors for Power Electronics Applications. RoHS Compliant. Highlights.
H Aerovox Corp. Film Capacitors for Power Electronics Applications Specifications Outline Drawing Capacitance Range: AC Voltage Range: DC Voltage Range: Temperature Range: Capacitance Tolerance: Dissipation
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
NMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
SPBW06 & DPBW06 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (TYP.) CAPACITOR LOAD (MAX.) SPBW06F-03 310mA 3.3V 0 ~ 1500mA 81% 4700μF SPBW06F-05
Power Electronics Capacitors Guide
Power Electronics Capacitors Guide Snubber Capacitors Conduction Cooled Power Capacitors DC-Link Capacitors Capacitors for Medical Instruments Ed:Sep.2013.Rev:0 DAL-K 1101208 Un 1100V DC 1200 μf ±10% -40/+85
Interference Suppression Capacitor
MOLDED BOX CONSTRUCTION, SUPPRESSION CAPACITOR, RADIAL LEAD FEATURES UL, CSA, VDE, CQC, CE, ENEC APPROVALS X2 SAFETY CAP CLASSIFICATION FOR USE IN ACROSS-THE-LINE APPLICATIONS METALLIZED POLYPROPYLENE
Digital motor protection relays
Digital motor protection relays Specification DMP -S & DMP -Sa DMP -T & DMP -Ta Model No. DMP06-S/Sa DMP60-S/Sa DMP06-T/Ta DMP60-T/Ta Wiring Screw type Tunnel type Panel mount Unit or Extension Note1)
Multilayer Chip Inductor
Features -Monolithic structure for high reliability -High self-resonant frequency -Excellent solderability and high heat resistance Construction Applications -RF circuit in telecommunication and other
60W AC-DC High Reliability Slim Wall-mounted Adaptor. SGA60E series. File Name:SGA60E-SPEC
AC-DC High Reliability Slim Wall-mounted Adaptor SGA60E series Ⅵ Ⅴ Ⅱ Ⅱ { ψ. ψ File Name:SGA60E-SPEC 2015-09-15 AC-DC High Reliability Slim Wall-mounted Adaptor SGA60E series SPECIFICATION ORDER NO. SGA60E05-P1J
Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0201 ~ 2512) LOW NOISE, THIN FILM (NiCr) CONSTRUCTION REFLOW SOLDERABLE (Pb FREE TERMINATION FINISH) Type Size EIA PowerRating
Specification. code ±1.0 ±1.0 ±1.0 ±1.0 ±0.5 approx (g)
High CV-value Long Life > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life Optimized designs available on request RoHS Compliant application Basic design Smoothing, energy storage,
Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction
TS-HA/HB Series 105 C, 3000 hours Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature:
Creative TEchnology Provider
1 Oil pplication Capacitors are intended for the improvement of Power Factor in low voltage power networks. Used advanced technology consists of metallized PP film with extremely low loss factor and dielectric
RJJ Miniature Aluminum Electrolytic Capacitors RJJ. Series RJJ High-Frequency, Low Impedance, Standard Type. Radial Type
352 Elna Corrections 80-95 /6/98 :55 AM Page Miniature Aluminum Electrolytic Capacitors Series High-Frequency, Low Impedance, Standard Type For high reliability applications, Environmentally safe. High-frequency,
MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS. Characteristics. Leakage Current(MAX) I=Leakage Current(µA) C=Nominal Capacitance(µF) V=Rated Voltage(V)
SERIES 5 C Long Life. Low impedance. (Rated Voltage 6.3~V.DC) FEATURES Load Life : 5 C 4~hours. Low impedance at khz with selected materials. SPECIFICATIONS Items Operating Temperature Range Rated Voltage
Lowara APPLICATIONS MATERIALS. General Catalogue
FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron and impeller in AISI 36* stainless steel, designed to pump hot, cold and moderately
OWA-60E series IP67. 60W Single Output Moistureproof Adaptor. moistureproof. File Name:OWA-60E-SPEC
Single Output Moistureproof Adaptor OWA-60E series IP67 Ⅱ Ⅱ moistureproof I File Name:OWA-60E-SPEC 0-04- Single Output Moistureproof Adaptor OWA-60E series SPECIFICATION MODEL OWA-60E- OWA-60E- OWA-60E-0
NTC Thermistor:TSM type
Features. RoHS compliant 2. EIA size 0402, 0603, 0805, 206 3. Highly reliable structure 4. -40 ~ +25 operating temperature range 5. Wide resistance range 6. Cost effective 7. Agency recognition: UL Recommended
PEH C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life
PEH 169 85 C High CV-value Long Life, > 10 years at 50 C Low ESR and ESL High stability, 10 years shelf life APPLICATION BASIC DESIGN Smoothing, energy storage, or pulse operation in telecommunication
Polymer PTC Resettable Fuse: KRG Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. Radial leaded devices 3. Broadest range of resettable devices available in the industry 4. Hold current ratings from 0.1 to 3.75A 5. Maximum voltage is
Surface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
65W PWM Output LED Driver. IDLV-65 series. File Name:IDLV-65-SPEC
~ A File Name:IDLV65SPEC 07050 SPECIFICATION MODEL OUTPUT OTHERS NOTE DC VOLTAGE RATED CURRENT RATED POWER DIMMING RANGE VOLTAGE TOLERANCE PWM FREQUENCY (Typ.) SETUP TIME Note. AUXILIARY DC OUTPUT Note.
Metal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
Features. Terminal Contact Enclosure style style form Open type Dust cover Ears on cover Antirotation-tab Ears on top
SONG CHUN Features 20/2 general purpose Power Relays. SPDT, DPDT, TPDT contact configurations. DC & C coils are both available. Optional for flange covers, tapped core w/anti-rotation tab, indicator lamp,
Lowara SPECIFICATIONS
SH Series Centrifugal pumps entirely made of AISI 36 stainless steel according to EN 733 (ex DIN 24255). Designed to pump hot, cold and moderately aggressive liquids. Available versions: SHE Close-coupled
LS series ALUMINUM ELECTROLYTIC CAPACITORS CAT.8100D. Specifications. Drawing. Type numbering system ( Example : 200V 390µF)
Snap-in Terminal Type, 85 C Standard Withstanding 3000 hours application of rated ripple current at 85 C. Compliant to the RoHS directive (2011/65/EU). LS Smaller LG Specifications Item Category Temperature
NTC Thermistor:SCK Series
Features. RoHS compliant 2. Body size Ф5mm~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φmm:-40~+70
SMD Power Inductor-VLH
SMD Power Inductor-VH Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 321618C 3.2±0.3 1.6±0.2
Polymer PTC Resettable Fuse: KMC Series
Features 1. RoHS & Halogen-Free (HF) compliant 2. IA size: 0603, 0805, 1206, 1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small
REFERENCE. Surge Absorber Unit. Contactor AS R 50Hz AC220V. Separate Mounting Unit. Mechanical Interlock Unit
REFERENCE Contactors Surge Absorber Unit GM C 22 R 50Hz AC220V AS 1 GM Magnetic Contactors C AC coil D DC coil W Enclosed starter Rated current (AC3 440V) 9 40 100 300 12 50 125 400 18 65 150 600 22 75
RC series Thick Film Chip Resistor
RC series Thick Film Chip Resistor Features» Small size and light weight» Compatible with wave and reflow soldering» Suitable for lead free soldering» RoHS compliant & Halogen Free Applications Configuration»
Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512. official distributor of
Product: Current Sensing Thick Film Chip Resistor-SMDB Series Size: 0402/0603/0805/1206/1210/2010/2512 official distributor of Current Sensing Thick Film Chip Resistor-SMDB Series 1. Scope -This specification
QUICKTRONIC PROFESSIONAL QTP5
osram.com QUICKTRONIC PROFESSIONA QTP5 ECG for T5/ 16mm, T8/ 26mm, DUUX fluorescent lamps QTP5 i.e. UMIUX T5 HO ES 01 Product Features: Up to 100.000 hours lifetime 1 amp start with optimized filament
At +105 C no voltage applied after 1,000 hours and then being stabilized at +20 C the capacitors shall meet the following limits Shelf Life
+15 C, High Ripple Current (), Low Impendence () FEATURES ì ì Low impedance for high frequency. Life time: 1,~4, hours at 15 C. SPECIFICATIONS Miniature Aluminum Electrolytic Capacitors Item Performance
Accu-Guard II. SMD Thin-Film Fuse ELECTRICAL SPECIFICATIONS
Accu-Guard II is a version of Accu-Guard fuses for a wider range of current and voltage ratings. Con struct ed on alumina substrates, Accu-Guard II fuses display superior electrical, mechanical and en
SMD Power Inductor-VLH
SMD Power Inductor-VH PAD AYOUT Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252510 2.5±0.2
NTC Thermistor:SCK Series
Features. RoHS & HF compliant 2. Body size: Ф5mm ~ Ф 30mm 3. Radial lead resin coated 4. High power rating 5. Wide resistance range 6. Cost effective 7. Operating temperature range: Φ5mm:-40~+50 Φ8~Φ0mm:-40~+70
C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]
![C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]](/thumbs/90/101883046.jpg "C121. External Dimensions (L W) (mm) 0603 [0201] [0402] [0603] [0805]")
Multilayer Chip SDV Series Operating Temp. : -55 ~+125 FEATURES SMD type suitable for high density mounting Excellent clamping ratio and quick response time (
DULUX L LUMILUX IMPROVED LIFETIME & SYSTEM GUARANTEE. DULUX L LUMILUX & QUICKTRONIC TECHNICAL INFORMATION
www.osram.com IMPROVED LIFETIME & SYSTEM GUARANTEE QTP-M 1x26-42 1 Benefits Extremly economical Good quality of light Excellent luminous flux Improved lumen maintenance Long service life time OSRAM + Guarantee
NPF-90D series. 90W Single Output Switching Power Supply IP67. File Name:NPF-90D-SPEC
Single Output Switching Power Supply Ⅱ Ⅱ IP67 Single Output Switching Power Supply SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC OTHERS NOTE NPF-90D-12 NPF-90D-1 NPF-90D-20 NPF-90D-24
NTC thermistors for temperature measurement
NTC thermistors for temperature measurement SMD NTC thermistors with nickel barrier termination, case size 0603 Series/Type: Date: June 2008 EPCOS AG 2008. Reproduction, publication and dissemination of
YJM-L Series Chip Varistor
Features 1. RoHS & Halogen Free (HF) compliant 2. EIA size: 0402 ~ 2220 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
Applications. 100GΩ or 1000MΩ μf whichever is less. Rated Voltage Rated Voltage Rated Voltage
Features Rated Voltage: 100 VAC, 4000VDC Chip Size:,,,,, 2220, 2225 Electrical Dielectric Code EIA IEC COG 1BCG Applications Modems LAN / WAN Interface Industrial Controls Power Supply Back-Lighting Inverter
CSK series. Current Sensing Chip Resistor. Features. Applications. Construction FAITHFUL LINK
CSK series Current Sensing Chip Resistor Features» 3 Watts power rating in 1 Watt size, 1225 Package» Low TCR of ±100 PPM/ C» Resistance values from 1m to 1 ohm» High purity alumina substrate for high
ELWOOD HIGH PERFORMANCE MOTORS H-SERIES MOTOR DATA
H-SERIES MOTOR DATA MOTOR MODEL H-3007 H-3016 H-4030-P H-4030-M H-4040 H-4050 H-4075 H-6100 H-6200 H-6300 MECHANICAL DATA (1) Rated Torque, Cont (Stall) 0.8 2.3 3.4 3.4 5.0 6.8 10.2 11.3 22.6 36.7 lb-in
Metal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Melf Carbon Film Resistor MMC Series
Melf Resistor Melf Carbon Film Resistor MMC Series Coating color: Beige Features - Tolerance up to ±2%. - Wide resistance range:1ω to 10MΩ. Type Dimension TYPE L D C S 0102 2.00±0.10 1.30±0.10 0.55±0.10
Sunlord. Wire Wound SMD Power Inductors SWCS Series SWCS XXXX -XXX T. Operating Temperature: -25 ~ +105 FEATURES APPLICATIONS PRODUCT IDENTIFICATION
Wire Wound SMD Power Inductors SWCS Series Operating Temperature: -25 ~ +105 FEATURES Various high power inductors are superior to be high saturation Suitable for surface mounting equipment APPLICATIONS
Applications Water distribution
1 FH Series Centrifugal electric pumps according to EN 733 (ex DIN 24255). Electric pumps with pump casing in cast iron designed to pump clean, chemically non-aggressive water and liquids. Available versions:
Distributed by: www.jameco.com -800-83-4242 The content and copyrights of the attached material are the property of its owner. φ δ δ φ φφ φ 86 δ φ δ An explanation of the taping dimensions can be found
01 How to order screw terminal type aluminum electrolytic capacitors. 02 VCG6A/ screw terminal type aluminum electrolytic capacitors
Catalog 01 How to order screw terminal type aluminum electrolytic capacitors 02 VCG6A/ screw terminal type aluminum electrolytic capacitors 05 VCG5A/ screw terminal type aluminum electrolytic capacitors
Precision Metal Film Fixed Resistor Axial Leaded
Features EIA standard colour-coding Non-Flame type available Low noise and voltage coefficient Low temperature coefficient range Wide precision range in small package Too low or too high ohmic value can
Metal Oxide Leaded Film Resistor
SURFACE TEMP. RISE ( ) Power Ratio(%) MOF0623, 0932, 1145, 1550, 1765, 2485 MOF Series Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~10MΩ -Controlled
SMD Power chokes- SPD Series SPD series chokes For High Current Use
SMD Power chokes- SPD Series SPD series chokes For High Current Use Features 1.Shielded construction. 2.High current rating up to DC Amp 3.High frequency range up to 5.MHz 4.Ultra low buzz noise, due to
Single-channel Safety Barriers Series 9001
Technical Data Certificates Explosion protection Europe (CENELEC) PTB 01 ATEX 2088 PTB 01 ATEX 2135 (Installation in Zone 2) USA FM Approval 3011002 UL Approval E81680 Canada CSA 1284547 (LR 43394) Russia
High Performance Voltage Controlled Amplifiers Typical and Guaranteed Specifications 50 Ω System
High Performance Voltage Controlled Amplifiers Typical and Guaranteed Specifications 50 Ω System Typical and guaranteed specifications vary versus frequency; see detailed data sheets for specification
Summary of Specifications
Snap Mount Large High CV High Ripple 85 C Temperature The series capacitors are the standard 85 C, large capacitance, snap-in capacitors from United Chemi-Con. The load life for the series is 2,000 hours
Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series. official distributor of
Product : Anti-Corrosive Thin Film Precision Chip Resistor-SMDR Series Size : 0402/0603/0805/1206/2010/2512 official distributor of Anti-Corrosive Thin Film Precision Chip Resistor (SMDR Series) 1. Features
FP series Anti-Bend (Soft termination) capacitor series
FP series Anti-Bend (Soft termination) capacitor series Features Applications» High performance to withstanding 5mm of substrate» For general digital circuit bending test guarantee» For power supply bypass
Surface Mount Multilayer Inductor
FETURES 0603, 0805, 0806 ND 1008 CSE SIZES HIGH CURRENT ND LOW RESISTNCE NEW "S" VERSION FOR INCRESED STURTION CURRENT UGRDED "H" VERSION FOR HIGHEST CURRENT REFLOW SOLDERING LICBLE CKGE FOR UTOMTIC ICKLCE
High pressure centrifugal pumps
High pressure centrifugal pumps Wilo-Multivert MVI (North America) Series description H [ft] 3 1 MVI 1 1 1 MVI 1 MVI 3 MVI MVI 1 1 Q [m³/h] Wilo-Multivert-MVI Hz - North America Q [US gpm] H [m] 1 1 1
65W PWM Output LED Driver. IDPV-65 series. File Name:IDPV-65-SPEC
IDPV65 series ~ A File Name:IDPV65SPEC 07060 IDPV65 series SPECIFICATION MODEL OUTPUT OTHERS NOTE DC VOLTAGE RATED CURRENT RATED POWER DIMMING RANGE VOLTAGE TOLERANCE PWM FREQUENCY (Typ.) SETUP TIME Note.
Multilayer Chip Capacitors C0G/NP0/CH
Multilayer Chip Capacitors C0G/NP0/CH Features Good thermal stability High insulation resistance Low dissipation factor Low inductance Applications Resonant circuits Filter circuits Timing elements Coupling
ZNR Transient/Surge Absorbers (Type D)
ZNR Transient/Surge Absorbers Type: Series: V Features arge withstanding surge current capability in compact sizes arge Energy andling Capability absorbing transient overvoltages in compact sizes ide range
4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
HIS series. Signal Inductor Multilayer Ceramic Type FEATURE PART NUMBERING SYSTEM DIMENSIONS HIS R12 (1) (2) (3) (4)
FEATURE High Self Resonant Frequency Superior temperature stability Monolithic structure for high reliability Applications: RF circuit in telecommunication PART NUMBERING SYSTEM HIS 160808 - R12 (1) (2)
FDL - FXDL FBDL SERIES
FDL - FXDL FBDL SERIES SUBMERSIBLE PUMPS FOR WITH ENTRAINED SOLIDS WASTE WATER Sewage pumps with power up to 22 kw (30 HP). Available in cast iron (FDL), AISI 316 stainless steel (FXDL), B10 bronze (FBDL).
Transient Voltage Suppressor
Transient Suppressor Features Glass passivated junction Low incremental surge resistance, excellent clamping capability Underwriters Laboratory Recognition under UL standard for safety 497B: Isolated Loop
Rating to Unit ma ma mw W C C. Unit Forward voltage Zener voltage. Condition
MA MA Series Silicon planer e For stabilization of power supply ø.56. Unit : mm Features Color indication of VZ rank classification High reliability because of combination of a planer chip and glass seal
Smaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
Unshielded Power Inductor / PI Series
.Features: 1. Excellent solderability and high heat resistance. 2. Excellent terminal strength construction. 3. Packed in embossed carrier tape and can be used by automatic mounting machine..applications:
Polymer PTC Resettable Fuse:KMC Series
Features 1. RoHS compliant 2. EIA size:1206~1812 3. Hold current ratings from 0.05 to 3A 4. Voltage ratings from 6V computer and electronic applications to 60V 5. Small footprint 6. Fast time to trip 7.
YAGEO CORPORATION SMD INDUCTOR / BEADS. CLH Series. Lead-free / For High Frequency Applications. CLH1005-H series CLH1608-H series ~1.4 0.
YAGEO CORPORATION SMD INDUCTOR / BEADS CLH Series Multilayer Chip Inductors High Frequency Lead-free / For High Frequency Applications APPLICATIONS RF Resonance and Impedance Matching Circuit RF and Wireless
Aluminum Capacitors C, Tubular, Radial Lead
Aluminum Capacitors + 105 C, Tubular, Radial Lead FEATURES Wide temperature range Radial design in two and three lead configuration Ideal SMPS output filter PERFORMANCE CHARACTERISTICS Operating Temperature:
TRC ELECTRONICS, INC LED Driver Constant Voltage 45W MEAN WELL IDLV-45 Series
LED Driver Constant Voltage 5W MEAN WELL IDLV5 Series ~ A File Name:IDLV5SPEC 0707 TRC ELECTRONICS, INC..888.6.95 LED Driver Constant Voltage 5W MEAN WELL IDLV5 Series TRC ELECTRONICS, INC. SPECIFICATION
1 Alumina Substrate 4 Edge Electrode (NiCr) 7 Resistor Layer (NiCr) 2 Bottom Electrode (Ag) 5 Barrier Layer (Ni) 8 Overcoat (Epoxy)
ARN series Thin Film High Precision Chip Resistor Features» Advanced thin film technology» Very tight tolerance down to ±0.01%» Extremely low TCR down to ±5ppm/» Wide resistance range 1ohm-3Mega ohm» Miniature