SPECIFICATION ORDER NO. LDD-00L LDD-0L LDD-00L LDD-00L LDD-700L CURRENT RANGE 00mA 0mA 00mA VOLTAGE RANGE Note. ~ VDC for LDD-00~700L/LW ; ~ 8VDC for LDD-00~700LS CURRENT ACCURACY (Typ.) ±% at VDC input OUTPUT RIPPLE & NOISE(max.) Note. 0mVp-p 0mVp-p 0mVp-p 00mVp-p 00mVp-p INPUT DIMMING & ON/OFF CONTROL EMC OTHERS NOTE SWITCHING FREQENCY 0KHz ~ 000KHz EXTERNAL CAPACITANCE LOAD (max.).uf VOLTAGE RANGE 9 ~ VDC for LDD-00~700L/LW ; 9~ VDC for LDD-00~700LS EFFICIENCY (max.) 9% at full load and VDC/VDC input for LDD-00~700L/LW ; 9% at full load and VDC input for LDD-00~700LS DC CURRENT Full load Note. 00mA 0mA 00mA No load ma FILTER Capacitor Leave open if not use REMOTE ON/OFF Power ON with dimming: DIM ~ >. ~ 8VDC or open circuit Power OFF : DIM ~ < 0.VDC or short FREQUENCY 00 ~ KHz QUIESCENT INPUT CURRENT ma at dimming OFF and VDC input IN SHUTDOWN MODE(max.) PROTECTION SHORT CIRCUIT Regulated at rated output current Protection type: Can be continued, recovers automatically after fault condition is removed OVER TEMPERATURE Tj 0 typically(ic) detect on main control IC Protection type : Shut down, recovers automatically after temperature goes down WORKING TEMP. -0 ~ + 8 (Refer to derating curve) WORKING HUMIDITY 0% ~ 90% RH non-condensing for LDD-00~700L/LW ; 0% ~ 8% RH non-condensing for LDD-00~700LS ENVIRONMENT STORAGE TEMP., HUMIDITY - ~ +, 0 ~ 9% RH TEMP. COEFFICIENT ± 0.0% / VIBRATION 0 ~ 00Hz, G 0min./ cycle, period for 0min. each along X, Y, Z axes OPERATING CASE TEMP. (max.) 00 EMC EMISSION EMC IMMUNITY MTBF DIMENSION WEIGHT POTTING MATERIAL Compliance to EN0, FCC part class B Compliance to EN000--,,,,8, light industry level, criteria A 000Khrs min. MIL-HDBK-7F ( ).*9.9*8.9mm or 0.89"*0.9"*0." inch (L*W*H) for LDD-00~700L/LW ;.*0.*9.mm or "*0."*0." inch (L*W*H) for LDD-00~700LS LDD-00~700L:g ; LDD-00~700LW:7.g ; LDD-00~700LS :.g Expoxy(UL9-V0) for LDD-00~700L/LW ; without potted for LDD-00~700LS File Name:LDD-L-SPEC 0-09-0
SPECIFICATION ORDER NO. LDD-000L LDD-00L LDD-00L CURRENT RANGE 000mA 00mA 00mA VOLTAGE RANGE Note. ~ 0VDC OUTPUT CURRENT ACCURACY (Typ.) ±% at VDC input RIPPLE & NOISE(max.) Note..Vp-p.Vp-p.Vp-p SWITCHING FREQENCY 000KHz EXTERNAL CAPACITANCE LOAD (max.).uf VOLTAGE RANGE ~ VDC EFFICIENCY (max.) 9% at full load and VDC/VDC input for LDD-000~00L/LW INPUT Full load Note. 990mA 0mA 0mA DC CURRENT No load ma FILTER Capacitor Leave open if not use REMOTE ON/OFF Power ON with dimming: DIM ~ >. ~.VDC or open circuit Power OFF : DIM ~ < 0.VDC or short FREQUENCY 00 ~ 00Hz DIMMING & ON/OFF CONTROL ANALOG DIMMING & ON/OFF CONTROL PROTECTION ENVIRONMENT EMC OTHERS NOTE QUIESCENT INPUT CURRENT IN SHUTDOWN MODE(max.) REMOTE ON / OFF SHORT CIRCUIT WORKING TEMP. -0 ~ + 7 (Refer to derating curve) WORKING HUMIDITY 0% ~ 90% RH non-condensing for LDD-000~00L/LW ; 0%~8% RH non-condensing for LDD-000~00LS STORAGE TEMP., HUMIDITY - ~ +, 0 ~ 9% RH TEMP. COEFFICIENT ± 0.0% / VIBRATION 0 ~ 00Hz, G 0min./ cycle, period for 0min. each along X, Y, Z axes OPERATING CASE TEMP. (max.) 00 EMC EMISSION EMC IMMUNITY MTBF DIMENSION ma at dimming OFF and VDC input Leave open if not use Power ON with dimming : DIM ~ >0.~.VDC or open circuit Power OFF : DIM ~ <0.VDC or short Regulated at rated output current Protection type: Can be continued, recovers automatically after fault condition is removed Compliance to EN0, FCC part class B Compliance to EN000--,,,,8, light industry level, criteria A 000Khrs min. MIL-HDBK-7F ( ).8*0.*.mm or."*0.8"*0.8" inch (L*W*H) for LDD-000~00L/LW ;.8*0.*0.9mm or."*0.8"*0." inch (L*W*H) for LDD-000~00LS WEIGHT LDD-000~00L:.g ; LDD-000~00LW:8g ; LDD-000~00LS:.8g POTTING MATERIAL Expoxy(UL9-V0) for LDD-000~00L/LW ; without potted for LDD-000~00LS File Name:LDD-L-SPEC 0-09-0
Mechanical Specification Pin Configuration Blank type(ldd-00~700l): Unit: mm (inch) 9.9 [0.9].8 [ 0. ]. [0.0] DIM ON/OFF and Dimming Don't connect to 7.78 [0.7]. [0.89] 7. [0.0] ψ0.0 8.9 [0.] NOTE: Pin tolerance ± 0.0mm W type(ldd-00~700lw): 9.9 [0.9] 8.9 [0.] ± mm 00± 0mm.[0.89] (Red) DIM (White) (Black) (Blue) (Yellow) ON/OFF and Dimming Don't connect to NOTE: All wires UL8 AWG S type(ldd-00~700ls): 7.78 [0.70] 0. [0.0]. [0.0] 7 8 0 9 0. [0.0] A 0. [0.0] 7,8 9,0 DIM ON/OFF and Dimming Don't connect to A 9. [0.] others N.C. [.00] 0.0 [0.].8 [0.0] Recommended PCB layout (for LDD-00~700LS).mm.mm 0 9.[0.8].[0.] TOP 7 8.[0.0].[0.].[0.0] File Name:LDD-L-SPEC 0-09-0
Mechanical Specification Blank type(ldd-000~00l): Unit: mm (inch) Pin Configuration 0. [0.80].0 [0.08].8 [0.].8 [.],,,, +analog DIM Don't connect to ON/OFF and / analog Dimming. [0.]. [0.0] ψ0.0. [0.8] NOTE: Pin tolerance ± 0.0mm W type(ldd-000~00lw): 0. [0.80] ± mm 00± 0mm. [0.8] NOTE: All wires UL8 AWG.8 [.] (Black) (Blue) (Yellow) +analog DIM (White) (Red) Don't connect to ON/OFF and / analog Dimming S type(ldd - 000~00LS): 0.[0.00].[0.09]. [.00] 0. [0.80].0 [0.08] 0. [0.0].8 [.]. [0.0],,,, +analog DIM Don't connect to ON/OFF and / analog Dimming.0 [0.0] 0.9 [0.]. [0.] others N.C No connection Recommended PCB layout (for LDD-000~00LS).mm.mm.0[.0].7[0.9] TOP.0[0.08].[0.].[0.0] File Name:LDD-L-SPEC 0-09-0
Reflow Soldering Curve (for LDD-00~00LS) Derating Curve Temperature ( ) 0 0 0 00 0 0 0 sec. Max. (>0 ) Time(sec.) Peak. Temp 0 0 sec. Max. 0 Remark : The curve applies only to the " Hot Air Reflow Soldering" Dimming Control (for 00~00mA) LOAD (%) 00 7 0 7 for 00~00mA -0 0 0 7 8 Ta ( ) 8 for 00~00mA 00 Io Adjustment by signal : 00 ~ : H L Dimming LDD-00~00L st LED Last LED H: >.~8VDC or open circuit L: < 0.VDC or short 000 ~ 00mA : H: >.~.VDC or open circuit L: < 0.VDC or short Signal Current { { H(V) L(0V) Max 0 ON ON ON OFF OFF OFF 00~KHz Frequency : 00~ : 00~ KHz 000~ 00mA : 00~00Hz During dimming operation, the output current will change to style. Iout(%) 00 7 0 Tol : ± %(Typ.) 0 0 7 00 Duty Cycle (%) Analog Dimming Control for 000~ 00mA only Io Adjustment by DC voltage : 0.~.VDC Dimming LDD-000~00L st LED Last LED 0% Vdc input 00% Iout 0% 0% 00 ma 00 ma 000 ma 0% 0%.0.9.8.7.......0.9.8.7.......0 0.9 0.8 0.7 0. 0. 0. 0. 0. 0. 0 Voltage control(0.~.vdc) File Name:LDD-L-SPEC 0-09-0
Efficiency VS Voltage(Number of LEDs) Fig- VDC input, ~ LEDs(Vf=V) Fig- VDC input, ~7 LEDs(Vf=V) EFFICIENCY (%) 00% 9% 90% 8% 00mA 0mA 00mA 000mA 00mA 00mA EFFICIENCY (%) 00% 9% 90% 8% 00mA 0mA 00mA 000mA 00mA 00mA 7% 7% 70% Voltage(LEDs) 70% 7 Voltage(LEDs) Fig- 00% 9% 90% VDC input, ~0 LEDs(Vf=V) 00 ma 0 ma 00 ma 00 ma 700 ma 000 ma 00 ma 00 ma EFFICIENCY (%) 8% 7% 70% % 7 8 9 0 Voltage(LEDs) File Name:LDD-L-SPEC 0-09-0