Λευκωσία, 21 Απριλίου 2017 ΠΡΟΣ: ΘΕΜΑ: Ολα τα Μέλη Δημοσίευση Ευρωπαϊκών Προτύπων-CEN & CENELEC Κύριοι, Σας αποστέλλονται συνημμένα τα κείμενα που περιλαμβάνουν: Τα Ευρωπαϊκά Πρότυπα CEN και CENELEC που εκδόθηκαν τον Μάρτιο 2017 και έχουν υιοθετηθεί ως Κυπριακά. Αποστέλλεται σύμφωνα με τις θεματικές κατηγορίες που πιστεύουμε ότι σας ενδιαφέρουν. Η Δημοσίευση έχει γίνει την Παρασκευή 7 Απριλίου 2017 /Παράρτημα Τρίτο-Μέρος 1/Αρ. 5007/Κ.Δ.Π. 98/2017 και Κ.Δ.Π. 99/2017. Τα Διεθνή Πρότυπα που έχουν εκδοθεί από τον Διεθνή Οργανισμό Τυποποίησης μπορείτε να τα δείτε στο ακόλουθο link: Για περισσότερες πληροφορίες μπορείτε να επικοινωνείτε με την κα. Δέσποινα Χριστοφόρου Κοτσώνη, Λειτουργό του Κυπριακού Οργανισμού Προτύπων, τηλ: 22-411413, φαξ: 22411433 και στην ηλεκτρονική διεύθυνση: d.christoforou@cys.org.cy Με εκτίμηση, Ανδρέας Ανδρέου, Διευθυντής Τμήματος Βιομηχανίας, για Γενικό Γραμματέα. /ΜΚ. Γρίβα Διγενή 38 & Δεληγιώργη 3, 1066, Τ.Θ. 21455, 1509 Λευκωσία, Κύπρος, Τηλ. + 357-22889860, Φαξ. + 357-22665685, E-mail: meropi@ccci.org.cy, Ιστοσελίδα:www.ccci.org.cy
1 APRIL 2017 ΟΙ ΠΕΡΙ ΤΥΠΟΠΟΙΗΣΗΣ, ΔΙΑΠΙΣΤΕΥΣΗΣ ΚΑΙ ΤΕΧΝΙΚΗΣ ΠΛΗΡΟΦΟΡΗΣΗΣ ΝΟΜΟI ΤΟΥ 2002 έως 2012 Γνωστοποίηση βάσει του Άρθρου 5 του Βασικού Νόμου 156(Ι)/2002 και του Άρθρου 6 του Τροποποιητικού Νόμου 57(Ι)/2011 Με το παρόν γνωστοποιείται ότι βάσει των Άρθρων 5 του βασικού Νόμου 156(Ι) του 2002 και 6 του τροποποιητικού Νόμου 57(Ι)/2011 που ρυθμίζουν τις δραστηριότητες της Τυποποίησης, Διαπίστευσης και Τεχνικής Πληροφόρησης, ο Κυπριακός Οργανισμός Τυποποίησης (CYS) δημοσιεύει ως Κυπριακά πρότυπα τα πιο κάτω Ευρωπαϊκά πρότυπα: STANDARDS FROM EUROPEAN COMMITTEE FOR STANDARDIZATION (CEN) 03 SERVICES. COMPANY ORGANIZATION, MANAGEMENT AND QUALITY. ADMINISTRATION. TRANSPORT. SOCIOLOGY CYS CEN 19091:2017 CYS CEN 17574:2017 ISO 24803:2017 ISO 11121:2017 Intelligent transport systems - Cooperative ITS - Using V2I and I2V communications for applications related to signalized intersections ( 19091:2017) Electronic fee collection - Guidelines for security protection profiles ( 17574:2017) Recreational diving services - Requirements for recreational diving providers (ISO 24803:2017) Recreational diving services - Requirements for introductory programmes to scuba diving (ISO 11121:2017) 03.220.20 03.220.20 03.080.30 03.080.30 CEN 17574:2009 S/S 14467:2004 13 ENVIRONMENT. HEALTH PROTECTION. SAFETY 207:2017 ISO 9241-112:2017 ISO 20685-2:2017 ISO 9241-392:2017 12101-2:2017 16450:2017 16909:2017 CYS CEN/TR 17078:2017 Personal eye-protection equipment - Filters and eye-protectors against laser radiation (laser eye-protectors) Ergonomics of human-system interaction - Part 112: Principles for the presentation of information (ISO 9241-112:2017) Ergonomics - 3-D scanning methodologies for internationally compatible anthropometric databases - Part 2: Evaluation protocol of surface shape and repeatability of relative landmark positions (ISO 20685-2:2015) Ergonomics of human-system interaction - Part 392: Ergonomic recommendations for the reduction of visual fatigue from stereoscopic images (ISO 9241-392:2015) Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5) Ambient air - Measurement of elemental carbon (EC) and organic carbon (OC) collected on filters Stationary source emissions - Guidance on the application of EN ISO 16911-1 13.340.20 13.220.99 13.040.40 S/S 207:2009 and AC:2011 S/S 12101-2:2003 CEN/TS 16450:2013
2 CYS CEN/TS 17035:2017 ISO 15008:2017 ISO 15005:2017 ISO 17892-5:2017 ISO 17892-6:2017 CYS CEN/TS 17045:2017 16846-1:2017 14405:2017 ISO 11272:2017 6059-304:2017 Surface Active Agents - Bio-based surfactants - Requirements and test methods Road vehicles - Ergonomic aspects of transport information and control systems - Specifications and test procedures for in-vehicle visual presentation (ISO 15008:2017) Road vehicles - Ergonomic aspects of transportation and control systems - Dialogue management principles and compliance procedures (ISO 15005:2017) Geotechnical investigation and testing - Laboratory testing of soil - Part 5: Incremental loading oedometer test (ISO 17892-5:2017) Geotechnical investigation and testing - Laboratory testing of soil - Part 6: Fall cone test (ISO 17892-6:2017) Materials obtained from end of life tyres - Quality criteria for the selection of whole tyres, for recovery and recycling processes Photocatalysis - Measurement of efficiency of photocatalytic devices used for the elimination of VOC and odour in indoor air in active mode - Part 1: Batch mode test method with a closed chamber Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions) 13.020.55 13.080.20 13.080.20 13.030.50 13.030.10 Soil quality - Determination of dry bulk density (ISO 11272:2017) 13.080.20 Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 304: Flammability 15008:2009 15005:2002 CEN 17892-5:2004 CEN 17892-6:2004 CEN/TS 14405:2004 11272:2014 ΔΙΟΡΘΩΣΕΙΣ KEIMENΩΝ ΠΡΟΤΥΠΩΝ ΑΠΟ ΠΡΟΗΓΟΥΜΕΝΕΣ ΔΗΜΟΣΙΕΥΣΕΙΣ 1909:2017 9132:2017 Title Safety requirements for cableway installations designed to carry persons - Recovery and evacuation Aerospace series - Quality management systems - Data Matrix Quality Requirements for Parts Marking MODIFICATIONS Release in English language The figures 3 and 4 have been swapped and their keys have been modified CORRIGENDA / ΤΡΟΠΟΠΟΙΗΣΕΙΣ 1052-2:2016 772-5:2016 12020-2:2016 12039:2016 Methods of test for masonry - Part 2: Determination of flexural strength Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of adhesion of granules
3 16603-50-05:2014 Space engineering - Radio frequency and modulation ΟΙ ΠΕΡΙ ΤΥΠΟΠΟΙΗΣΗΣ, ΔΙΑΠΙΣΤΕΥΣΗΣ ΚΑΙ ΤΕΧΝΙΚΗΣ ΠΛΗΡΟΦΟΡΗΣΗΣ ΝΟΜΟI ΤΟΥ 2002 έως 2012 Γνωστοποίηση βάσει του Άρθρου 5 του Βασικού Νόμου 156(Ι)/2002 και του Άρθρου 6 του Τροποποιητικού Νόμου 57(Ι)/2011 Με το παρόν γνωστοποιείται ότι βάσει των Άρθρων 5 του βασικού Νόμου 156(Ι) του 2002 και 6 του τροποποιητικού Νόμου 57(Ι)/2011 που ρυθμίζουν τις δραστηριότητες της Τυποποίησης, Διαπίστευσης και Τεχνικής Πληροφόρησης, ο Κυπριακός Οργανισμός Τυποποίησης (CYS) δημοσιεύει ως Κυπριακά πρότυπα τα πιο κάτω Ευρωπαϊκά πρότυπα: STANDARDS FROM EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) 03 SERVICES. COMPANY ORGANIZATION, MANAGEMENT AND QUALITY. ADMINITRATION. TRANSPORT. SOCIOLOGY 62550:2017 Spare parts provisioning 03.120.01 13 ENVIRONMENT. HEALTH PROTECTION. SAFETY 50849:2017 60695-8- 2:2017 50402:2017 50131-5- 3:2017 60839-11- 31:2017 60839-11- 32:2017 60695-1- 10:2017 Sound systems for emergency purposes Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of gas detection systems Alarm systems - Intrusion systems - Part 5-3: Requirements for interconnections equipment using radio frequency techniques Alarm and electronic security systems - Part 11-31: Electronic access control systems - Core interoperability protocol based on Web services Alarm and electronic security systems - Part 11-32: Electronic access control systems - Access control monitoring based on Web services Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines 13.310 S/S 60849:1998 S/S 50402:2008 and AC:2010 S/S 50131-5- 3:2005 and A1:2008 S/S 60695-1- 10:2010
4 CORRIGENDA / ΤΡΟΠΟΠΟΙΗΣΕΙΣ 62368-1:2014-03 60505:2011-03 Audio/video, information and communication technology equipment - Part 1: Safety requirements (IEC 62368-1:2014, modified) Evaluation and qualification of electrical insulation systems