the smartest energy Floor standing DHW (Domestic Hot Water) storage tanks for Forced Circulation olar systems www.thermicsol.com 15
Floor standing single coil DHW storage tanks Material: teel sheet EN-10130 AI DC0-1 DCP Welding: Metal-Tungsten Inert Gas welding Protection coating: High quality glass Enamel and protection anode Maximum working pressure: 10 bar Maximum water test pressure: 16 bar Maximum operating temperature: 95 C Insulation: Polyurethane foam of 50mm thickness, density 52kg/m³ Coil type exchanger: teel Tube Maximum exchanger test pressure: 25 bar Back up electric heater: Upon request Flange: Diameter Ø 170 mm For all Forced Circulation systems where olar DHW storage tanks enamelled, epoxy protected and Combined are included, it is necessary: Installation of expansion vessel/s, ecurity pressure relief valve/s Cathodic protection anode for both primary and secondary circuits. pricelist PART Nr. BLLTGL150 BLLTGL200 BLLTGL300 BLLTGL500 Total actual capacity 139.3 196.4 270.8 455.2 Exchanger s actual capacity 5 6.4 6.4 12.2 Exchanger 1 inlet/outlet 1 1 1 1 Exchanger s area (m²) 0,78 0,986 0,986 1,92 Exchanger s diameter 3/4 3/4 3/4 1 Cold water inlet 1 1 1 1 Hot water outlet 1 1 1 1 Anode - Flange diameter 2x Ø170 2x Ø170 2x Ø170 2x Ø170 Output, th. fluid 90 C, water from 10 to 45 (kw/l/h) 13,1 A Cold water inlet 245 245 240 195 J Hot water outlet 880 1170 1360 1355 C Exchanger 1 inlet 577 690 820 815 A Exchanger 1 outlet 245 235 220 205 B Recirculation 465 545 620 615 F Flange - manhole 420 420 450 420 H Total height 1120 1400 1620 1700 E Thermostat 668 1070 1140 1115 K Thermometer 870 1160 1320 1310 G Back-up heating element posit. 660 785 930 930 D Diameter Ø560 Ø600 Ø630 Ø750 Operation Pressure / bars 10 10 10 10 Total weight (kg) 61 85 111 141 14,4 22,9 25,8 16 Back-up electric element is not included. To be ordered seperately at capacity required.
Floor standing single coil DHW storage tanks the smartest energy Material: teel sheet EN-10130 AI DC0-1 DCP Welding: Metal-Tungsten Inert Gas welding Protection coating: Protection Coating: High quality glass Enamel and magnesium anode protection Maximum working pressure: 10 bar Maximum water test pressure: 16 bar Maximum operating temperature:: 95 C Insulation: oft Polyurethane foam of 100mm thickness, vinyl external. Coil type exchanger: teel Tube Maximum exchanger test pressure: 25 bar Back up electric heater: Upon request Flange: Diameter Ø 170 mm For all Forced Circulation systems where olar DHW storage tanks enamelled, epoxy protected and combined are included, it is necessary: Installation of expansion vessel/s, ecurity pressure relief valve/s Cathodic protection anode for both primary and secondary circuits. PART Nr. BLLTGL750 BLLTGL1000 Total actual capacity 757 881 Exchanger s actual capacity 15,20 19,20 Exchanger 1 inlet/outlet 1 1 Exchanger s area (m²) 3,02 2,39 Exchanger s diameter 1 1 Cold water inlet 1½ 1½ Hot water outlet 1½ 1½ Anode - Flange diameter 1 1 Output, th. fluid 90 C, water from 10 to 45 (kw/l/h) A Cold water inlet 305 280 J Hot water outlet 1475 1670 C Exchanger 1 inlet 995 1040 A Exchanger 1 outlet 305 265 B Recirculation 1285 1470 F Flange - manhole 515 485 H Total height 1800 E Thermostat 1285 1480 K Thermometer 1410 1670 G Back-up heating element posit. 1040 1150 D Diameter Ø1000 Ø1000 Diagonal (mm) 2059,1 2236,1 Operation pressure (bars) 10 10 Total weight 228 243 30,15 39,5 www.thermicsol.com Back-up electric element is not included. To be ordered seperately at capacity required. 17
Floor standing double coil DHW storage tanks pricelist Material: teel sheet EN-10130 AI DC0-1 DCP Welding: Metal-Tungsten Inert Gas welding Protection coating: High quality glass Enamel and protection anode Maximum working pressure: 10 bar Maximum water test pressure: 16 bar Maximum operating temperature: 95 C Insulation: Polyurethane foam of 50mm thickness, density 52kg/m³ Coil type exchanger: teel Tube Maximum exchanger test pressure: 25 bar Back up electric heater: Upon request Flange: Diameter Ø 170 mm For all Forced Circulation systems where olar DHW storage tanks enamelled, epoxy protected and combined are included, it is necessary: Installation of expansion vessel/s, ecurity pressure relief valve/s Cathodic protection anode for both primary and secondary circuits. N M K J E C B CI1 R CO1 CI2 CO2 A HWO CWI T D TR ER F G L O H Υλικό: Λαμαρίν Κόλληση: Αυτο Επικάλυψη Πρ ανoδίου Μέγιστη Πίεση Πίεση Δοκιμής Μέγιστη Θερμ Μόνωση: Αφρό Εναλλάκτης: Σ Πίεση Δοκιμής Ηλεκτρική Αντ Φλάντζα: Διάμ Σε όλα τα Boiler Λ είναι απαραίτητο Ανοδική Προστασ TyΠΟΣ 150L T.E. ΚωΔΙΚΟΣ BLLTGL150/2 Χωρητικότητα δοχείου liter 132.9 PART Nr. BLLTGL150/2 BLLTGL200/2 Χωρητικότητα εναλλάκτη BLLTGL300/2 BLLTGL500/2 8 Total actual capacity 132.9 190 Εναλλάκτης 1 είσοδος/έξοδος 261.5 442.4 1" Exchanger s actual capacity 8 11.4 Επιφάνεια 11.4 εναλλάκτη m² 19.8 0,53/0,78 Exchanger 1 & 2 inlet/outlet 1 1 Επανακυκλοφορία 1 1 3/4" Exchanger s 1 & 2 area (m²) 0,53/0,78 0,78/0,99 Είσοδος 0,78/0,99 κρύου νερού 1,20/1,92 1" Exchanger s diameter 3/4 3/4 Έξοδος ζεστού 3/4 νερού 1 1" Cold water inlet 1 1 Φλάντζα Ανόδιο 1 1 Ø170 & Ø140 Hot water outlet 1 1 Για σύνδεση 1 1 στο boiler με 80 C 1 και 10,4 νερού 15/60 C kw/l/h Anode - Flange diameter Ø170&Ø140 Ø170&Ø140 Ø170&Ø140 Ø170&Ø140 1 Output, th. fluid 90 C, water from 2 Output, th. fluid 90 C, water from Για σύνδεση 2 στο boiler με 80 C και 10.4 13,6 16,4 19,2 13,1 νερού 15/60 C kw/l/h 13,1 A 14,4 Είσοδος κρύου νερού 22,9 25,8 235 N Έξοδος ζεστού νερού 880 A Cold water inlet 235 235 J Έξοδος εναλλάκτη 245 1 195 685 N Hot water outlet 880 1135A Έξοδος εναλλάκτη 1380 2 1370 235 J Exchanger 1 inlet 685 855M Είσοδος εναλλάκτη 1050 1 985 880 A Exchanger 2 inlet 235 230C Είσοδος εναλλάκτη 225 2 200 565 M Exchanger 1 inlet 880 1135K Ανακυκλοφορία 1350 1345 780 C Exchanger 2 inlet 565 685H Συνολικό ύψος 820 820 1120 K Recirculation 780 1010E Αισθητήρας 1245 1155 628 H Total height 1120 1400G Υποδοχή ηλεκτρικής 1620 αντίστασης 1700 630 E Temp. sensor 628 775 B Αισθητήρας 930 365 G Back-up heating element posit. 630 770 L Θερμοστάτης 930 910 775 B Temp. sensor 365 335O Θερμόμετρο 445 430 865 L Thermostat 775 1034D Διάμετρος 1070 1100 Ø560 O Thermometer 865 1063 Διαγώνιος 1200 (mm) 1130 1252.2 F Flange - manhole 420 420 F Φλάντζα καθαρισμού 450 425 420 D Diameter Ø560 Ø600 Πίεση λειτουργίας Ø630 / bar Ø750 10 Βάρος kg 70 Operation pressure (bars) 10 10 10 10 Total weight 70 100 130 170 18 Back-up electric element is not included. To be ordered seperately at capacity required.
Floor standing double coil DHW storage tanks the smartest energy Material: teel sheet EN-10130 AI DC0-1 DCP Welding: Metal-Tungsten Inert Gas welding Protection coating: High quality glass Enamel and magnesium anode protection Maximum working pressure: 10 bar Maximum water test pressure: 16 bar Maximum operating temperature: 95 C Insulation: oft Polyurethane foam of 100mm thickness, vinyl external. Coil type exchanger: teel Tube Maximum exchanger test pressure: 25 bar Back up electric heater: Upon request Flange: Diameter Ø 170 mm M-N K J E C HWO CI1 CO1 CI2 B R CO2 A T CWI D F TR ER G L O H www.thermicsol.com Υλικό: Λ Κόλληση Επικάλυ ανoδίου Μέγιστη Πίεση Δο Μέγιστη Μόνωση Εναλλάκ Πίεση Δο Ηλεκτρι Φλάντζα Σε όλα τα ματα είνα Ασφαλεία For all Forced Circulation systems where olar DHW storage tanks enamelled, epoxy protected and combined are included, TyΠΟΣ it is necessary: Installation of expansion vessel/s, ΚωΔΙΚΟΣ ecurity pressure relief valve/s Χωρητικότητα δοχείου liter Cathodic protection anode for both primary and secondary circuits. Χωρητικότητα εναλλάκτη PART Nr. BLLTGL750/2 Εναλλάκτης 1 είσοδος/έξοδος BLLTGL1000/2 Total actual capacity 747,10 Επιφάνεια εναλλάκτη m² 865,40 Exchanger s actual capacity 23,80 Επανακυκλοφορία 31,70 Exchanger 1 & 2 inlet/outlet 1 Είσοδος κρύου νερού 1 Exchanger s 1 & 2 area (m²) 1,35 / 2,39 Έξοδος ζεστού νερού 1,97 / 3,02 Exchanger s diameter 1 Φλάντζα Ανόδιο 1 Cold water inlet 1½ Για σύνδεση 1 στο boiler 1½ με 80 C και νερού 15/60 C kw/l/h Hot water outlet 1½ Για σύνδεση 2 στο boiler 1½ με 80 C και νερού 15/60 C kw/l/h Drainage 1 A Είσοδος κρύου νερού 1 Anode - Flange diameter Ø170 & Ø170 N Έξοδος ζεστού νερούø170 & Ø170 1 Output, th. fluid 90 C, water 27,20 J Έξοδος εναλλάκτη 1 37,10 from 10 to 45 (kw/l/h) 476,40 632,60 A Έξοδος εναλλάκτη 2 2 Output, th. fluid 90 C, water 30,15 38,5 M Είσοδος εναλλάκτη 1 from 10 to 45 (kw/l/h) C Είσοδος εναλλάκτη 2 A Cold water inlet 305 290 K Ανακυκλοφορία N Hot water outlet 1475 1670 J Exchanger 1 inlet 1135 H Συνολικό ύψος 1230 A Exchanger 2 inlet 305 E Αισθητήρας 280 M Exchanger 1 inlet 1435 G Υποδοχή ηλεκτρικής αντίστασης 1679 C Exchanger 2 inlet 995 B Αισθητήρας 1055 K Recirculation 1285 L Θερμοστάτης 1507 E Temp. sensor 1025 O Θερμόμετρο 1142,5 G Back-up heating element posit. 1025 D Διάμετρος 1142,5 H Total height 1800 Διαγώνιος (mm) F Φλάντζα καθαρισμού L Thermostat 1325 1532 Πίεση λειτουργίας / bar O Thermometer 1420 Βάρος kg 1725 Β Temp. sensor 505 515 F Flange - manhole 555 485 D Diameter Ø1000 Ø1000 Total weight 231 273 Back-up electric element is not included. To be ordered seperately at capacity required. 19
pricelist 20 Floor standing single coil DHW storage tanks (large exchanger for heat pump applications) Floor standing DHW storage tanks with single or double extra long coil type heat exchangers for specialized applications. E.g. to use with heat pumps. Extra length means additional heat exchanging surface area. Range from 200 up to 500 litres. Custom manufacturing in larger capacities available upon request. Material: teel sheet EN-10130 AI DC0-1 DCP Welding: Metal-Tungsten Inert Gas welding Protection Coating: High quality glass Enamel and protection anode Maximum Working Pressure: 10 bar Maximum water test pressure: 15 bar Maximum operating temperature: 95 C Insulation: Polyurethane foam of 55mm thickness, density 52kg/m³ Coil type exchanger: teel Tube glass - enameled Maximum exchanger test pressure: 25 bar J N G HWO CI1 TyΠΟΣ C R C01 B CWI 630 ER DRN TR E F A K H Ha 200L Δ.Ε. Flange/s: ΚωΔΙΚΟΣ Diameter Ø 170 mm & Ø 170 mm BLLTGL200/ Back Συνολική up electric Χωρητικότητα Heater: δοχείου liter 200 Not Χωρητικότητα included (special εναλλάκτη el. element liter required available in 3,6kW 22,7 Εναλλάκτης 1 είσοδος/έξοδος 1.1/2" Επιφάνεια εναλλάκτη m² 2,6 Διατομή εναλλάκτη 1.1/4" R Επανακυκλοφορία 3/4" CWI Είσοδος κρύου νερού 1" HWO Έξοδος ζεστού νερού 1" Φλάντζα Ανόδιο Ø170 & Ø170 Για σύνδεση στο boiler με 80 C και νερό 15/60 C kw/l/h 24 1000 Για σύνδεση στο boiler με 80 C For all και Forced νερό Circulation 15/60 C systems kw/l/hwhere olar DHW 60 storage tanks enamelled, epoxy protected and B Είσοδος κρύου νερού Combined are included, it is necessary:installation 260 Lof expansion Έξοδος vessel/s, ζεστού security νερού pressure relief valve/s and cathodic protection anode for both 1545 primary J Είσοδος and secondary 1 εναλλάκτη circuits. 1345 C Έξοδος 1 εναλλάκτη 305 G Ανακυκλοφορία 655 F Υ Κ Ε σ Μ Π Μ Μ τ Ε Π Η Φ Σ γ Δ ζ
the smartest energy PART Nr. BLLTGL200/1HP BLLTGL300/1HP BLLTGL500/1HP Total actual capacity 200 310 495 Total actual capacity 22,7 31,5 36,1 Exchanger inlet. Οutlet 1¼ 1.1/2 1.1/2 1.1/2 Exchanger s area (m²) 2,6 3,6 4,2 Exchanger s diameter 1.1/4 1.1/4 1.1/4 R Recirculation 3/4 3/4 3/4 CWI Cold water inlet 1 1 1 HWO Hot water outlet 1 1 1 Anode - Flange diameter Ø170 & Ø170 Ø170 & Ø170 Ø170 & Ø140 Output, th. fluid 80 C, water from 15 to 60 (kw/l/h) B Cold water inlet 260 210 265 L Hot water outlet 1545 1620 1700 J Exchanger 1 inlet 1345 1380 1415 C Exchanger 1 outlet 305 210 245 G Recirculation 655 795 830 F Flange - manhole 480 420 475 H Total height 1545 1620 1700 J Thermostat 1355 1330 1385 K Thermometer 1355 1320 1385 A Drainage 817 580 915 Ε Temp. sensor 250 190 245 D Diameter Ø600 Ø630 Ø750 Diagonal (mm) 1523.15 1766.18 1996.24 Total weight 128 154 199 60 100 125 Back-up electric element is not included. To be ordered seperately. www.thermicsol.com 21
Floor standing double coil DHW storage tanks (large exchanger for heat pump applications) Floor standing DHW storage tanks with single or double extra long coil type heat exchangers for specialized applications. E.g. to use with heat pumps. Extra length means additional heat exchanging surface area. Range from 200 up to 500 litres. Custom manufacturing in larger capacities available upon request. J N G CI1 HWO C R C01 B CO2 CWI ER DRN CI2 TR E F A K H Ha Υλικ Κόλ Επικ Μέγ Πίεσ Μέγ Μόν Ενα Πίεσ Ηλε Φλά Σε ό είναι Ανοδ TyΠΟΣ Material: teel sheet EN-10130 AI DC0-1 DCP Welding: Metal-Tungsten Inert Gas welding Protection Coating: High quality glass Enamel and protection anode Maximum Working Pressure: 10 bar ΚωΔΙΚΟΣ Συνολική Χωρητικότητα δοχείου liter Χωρητικότητα εναλλάκτη (1.1/4") Εναλλάκτης 1 είσοδος/έξοδος (1.1/4") Επιφάνεια εναλλάκτη m² (1.1/4") Διατομή εναλλάκτη Χωρητικότητα εναλλάκτη (3/4") Flange/s: Diameter Ø 170 mm & Ø 170 mm Back up electric Heater: Not included (special el. element required available in 3,6kW price: 147) BL Maximum water test pressure: 15 bar Maximum operating temperature: 95 C Εναλλάκτης 2 είσοδος/έξοδος (3/4") Επιφάνεια εναλλάκτη m² (3/4") Διατομή εναλλάκτη pricelist 22 Insulation: Polyurethane foam of 55mm thickness, density 52kg/m³ Coil type exchanger: teel Tube glass - enameled Maximum exchanger test pressure: 25 bar R CWI HWO Επανακυκλοφορία Είσοδος κρύου νερού Έξοδος ζεστού νερού For all Forced Circulation systems where olar DHW storage tanks enamelled, epoxy protected and Combined are Φλάντζα included, it Ανόδιο is necessary:installation of expansion vessel/s, security pressure relief valve/s and cathodic protection anode for both primary and secondary circuits. Για σύνδεση στο boiler με 80 C και νερό 15/60 C kw/l/h Για σύνδεση στο boiler με 80 C και νερό 15/60 C kw/l/h
the smartest energy PART Nr. BLLTGL200/2HP BLLTGL300/2HP BLLTGL500/2HP Total actual capacity 200 310 495 Exchanger s 1 actual capacity 22,7 31,5 36,1 Exchanger 1 inlet. Οutlet 1¼ 1.1/2 1.1/2 1.1/2 Exchanger s 1 area (m²) 2,6 3,6 4,2 Exchanger s 1 pipe diameter 1.1/4 1.1/4 1.1/4 Exchanger s 1 pipe capacity 5,85 10,8 12,7 Exchanger 1 inlet. Οutlet ¾ 3/4 3/4 3/4 Exchanger s 1 area (m²) 1,2 2,2 2,6 Exchanger s 1 pipe diameter 3/4 3/4 3/4 R Recirculation 3/4 3/4 3/4 CWI Cold water inlet 1 1 1 HWO Hot water outlet 1 1 1 Anode - Flange diameter Ø170 & Ø170 Ø170 & Ø170 Ø170 & Ø140 Output 2, th. fluid 80 C, water from 10 to 60 (kw/l/h) Output 1, th. fluid 80 C, water from 10 to 60 (kw/l/h) B Cold water inlet 260 210 265 L Hot water outlet 1545 1620 1700 J Exchanger 1 inlet 1345 1380 1415 C Exchanger 1 outlet 305 210 245 G Recirculation 655 795 830 F Flange - manhole 480 420 475 H Total height 1545 1620 1700 J Thermostat 1355 1330 1500 K Thermometer 1355 1320 1385 A Drainage 817 580 915 Ε Temp. sensor 250 190 245 D Diameter Ø600 Ø630 Ø750 Diagonal (mm) 1523.15 1766.18 1996.24 Total weight 147 192 240 24 1000 60 40 1000 100 50 1000 125 www.thermicsol.com 23
pricelist The information provided in this document is intended for informational purposes only and is subject to change without notice. Information may be changed or updated without notice. Thermic Ltd may also make improvements and/or changes in the products, pricing at any time without notice. 24