Available Specification & Size of CSAC Aluminium Products
|
|
- Νεφέλη Δελφίνια Κορνάρος
- 5 χρόνια πριν
- Προβολές:
Transcript
1 Available Specification & Size of CSAC Aluminium Products 1. Casting Ware Application Specification Alloy Temper or sand mode, shell mode & metal mode. JIS H5202 AC2A, AC2B, AC3A, AC4B, AC4C, AC7A, AC7B, AC8A, AC8B or die-casting JIS H5302 ADC1, ADC3, ADC6, ADC10, ADC10Z ADC12 or sand mode & ASTM B179 A356.2, A357.2, A380.2, A413.2, A520.2 permanent mode. A356.2 Zinc anode ZNA1 CAC Spec Zinc ingot or die-casting ZAD2, ZAD3, ZAD3M, ZAD5M, ZAD8, ZAD12, ZAD27, ZAD4 Zinc ingot or galvanizing ZNJ1, ZNJ3, ZNJ5, ZNJ7, ZNJ4, ZNJ50 2. oil And in-stock 2.1 Available Specification & Size of oil: Specification, Alloy Application Thickness (μm) & Temper JIS -, H18 Single side AA 1235-, H T 50 bright JIS JIS -H18 12 T 50 AA Double side bright JIS -, H18 JIS 1050-, H18 JIS 1100-, H18 JIS 3003-H18 AA 1235-, H19 50<T< T 150 Width (mm) 390 W W W W 1630 Internal Max. utside Diameter (mm) Diameter (mm) ,200, 305,5 2.2 Available Specification & Size of in-stock:(cac Specification) Internal Diameter (mm) 1050, H22, 100 W , 200, W W , 200, 305 in-stock 1200 H22, 300 W Pre-coated fin-stock T W , 200, 305 H W , H22, 300 W , H22, 300 W , H W T 0.30 H W Max. utside Diameter (mm) Chemical composition same as AA or JIS spec. CAC spec. Chemical composition same as AA or JIS spec. CAC spec. 2.3 Special oil Products (CAC Specification) Hollowware 1100 Core of speaker Exhaust pipe for kitchen Cable shielding , H22, 0.05 T W 756 Internal Max. utside Diameter (mm) Diameter (mm) 150, T W T T W , 200, 305, 5
2 Household foil (not single side bright for laminated use) Current collector of battery, Drug package Package of battery Tab of battery T W T W T W AA spec. H T W JIS spec T W T W , ilter H T W , Tire repair patch H T W Plate 3.1 Plate: Available Alloy, Temper, Thickness, Width & Length of Plate (or AA, JIS Specification) Alloy Temper Thickness (mm) Width (mm) Length (mm) 1050, 1070, , 5052, 5456, 53, H116 H <T <T <T< T <T< T <T< T <T <T< W L L W L W L W , 56, 5456 H T W H T W H32/H T W W 1525 / <T< T L T T W L 6000 T <T W L 6000 Allow surface scratches and contamination marks Allow surface scratches and contamination marks or T451, T 76.2mm 2
3 15.0 T L T T L 6000 : The maximum thickness shall be refers to both table 3.1 and applicable specification. 4. Coil Sheet And lat Sheet 4.1 Available Specification, Alloy, Temper & Thickness of Sheet Alloy Apply Spec. Temper Thickness (mm) 0.15 T ,1070,1100, 0.25 T Alloy 1050, 1070, only JIS available 3003,3004, AA, JIS H14, H T xxx H16, T 0.18mm 5005,5052, 5252,5454, 5754 H16, H T xxx H18, T 0.15mm H18, H T JIS, H T JIS, H T T JIS H T AA, JIS 0.20 T AA, JIS H T 6.00 or AA spec., T 0.43 mm 5005, 5052,5252 AA, JIS H T 6.00 or Alloy 5252, only CAC spec. available 5052 AA, JIS H T 4.00 AA, JIS 0.15 T 6.00 AA, JIS 1.20 T JIS H T 5.00 AA, VL H T T AA, JIS 0.50 T 6.00 H14, H T 5.00 or Alloy 5182, only CAC spec. available 56, 5182 AA, JIS H16, H T 3.50 H18, H T ,5052,5182,52 JIS H19, H T 0.50 or umbrella rib : 0.20 T T 6.00 AA, JIS T 6.00 AA, JIS T4 T T AA 7075 JIS 0.25 T 6.00 T T 3.20 T4 T6 EN 0.40 T 3.20 T T 3.20 : or SQ or higher grade, maximum thickness is 2mm. 4.2 Available Thickness, Width & Length of lat Sheet Application Thickness (mm) Width (mm) Length (mm) 0.12 T W L xxx & 3xxx& 5xxx alloy 0.80 T W L T W L 8000 or ship, W 2000mm Painted Sheet 0.20 T W L xxx alloy 0.40 T W L xxx alloy 0.40 T W L
4 4.3 Available Thickness, Width & Internal Diameter or Coil Sheet And Slit Coil Application Thickness (mm) Width (mm) Internal Diameter (mm) General Product 0.10 T< W T xxx 305 (T 1.0mm) Non Paint 0.20 T xxx sheet 406 (T 1.0mm) temper 5xxx 0.20 T W xxx 0.40 T W xxx 0.40 T W 1250 temper ALL 0.25 T< W T 3.4 : or temper, reel marks shall not be cause for rejection. 305 (T 1.0mm) 406 (T 1.0mm) 5 1. or Cap stock, W 800mm 2. or 1xxx alloy, T 3.6mm Maximum outside diameter is 950mm. 5. Special Products 5.1 Special Products Internal Diameter (mm) End stock 5052 H19, H39, 5182 H T W 2050 Tab stock 5182 H19, H39, H T W , 406, 5 Can 5042 H19, H39, H T W 2050 Can body 3104 H19, H T W , 406, H T 0.33 Bottle cap Blind stock 1100 H16, H T H T H T H T H36, H38, H T H T W 1500 (Coil sheet) 800 W 1320 (lat sheet) 305, 406, 5 (Coil sheet) 800 Length 1500 (lat sheet) H T W T< W , 200, 305, , H18 or laminate used 0.15 T W , 406, 5 cladding material 3105 H16 H H T W , 406, H T< W , 200, 305, H T W , 406, 5 Paint sheet cladding 3105 H T W , 406, 5 material 3105 H T< W , 200, 305, H T W , 406, H T W , 406, 5 Shielding material T ,406,5 for T ,406,5 Bumper beam T W ,406,5,610 Panel for 6016 T T W ,406,5 4
5 uter panel for 305,406,5 6M02 T4A 0.80 T W M02 T4B 0.80 T W ,406,5 Reinforcement parts 6M02 T4C 0.80 T W ,406, / 0.80 T W ,406,5,610 5RS2 / 0.80 T W ,406,5,610 Structural parts for 5754 / 0.80 T W ,406,5,610 T T 1.00 T01-H T C products T01-H T W ,406,5 EAC1 C T 2.0 EAC2 C T 1.0 AN01 H T 1.00 Color corrugated AN02 H T 1.00 sheet AN03 H T W ,406,5 1:ID305 and 406mm is only applicable to thickness 1.0mm or thinner. 2:or flat sheet, maximum width is 1820mm. 5.2 MARINE PLATE Certification Body Alloy Temper Thickness (mm) Width (mm) Length (mm) DNV GL 53,,, H116, H T 50.0 Det Norske Veritas 56,,, H T 50.0 Germanischer Lloyd 5383,, H116, H T 50.0 CR Classification Society BV Bureau Veritas LR Lloyd's Register ABS American Bureau of Shipping NK Nippon Kaiji Kyokai 53,, H116, H T ,, H T , H116, H T ,,, H116, H T ,,, H T , H T 50.0, H T ,,, H116, H T ,,, H T ,, H116, H T ,, H116, H T , 3.0 T 50.0 H T , H116, H T , H116, H T W L Notes 6.1 or the alloy/temper not included in the above tables, please contact sales for further information. 6.2 or the latest revision of Available Specification & Size, please visit web site 5
Pipe E235N (St 37.4 NBK) phosphated and oiled
Pipe E235N (St 37.4 NBK) phosphated and oiled Working Pressure Burst Pressure 4X1ST37.4NBK* 4 x 1.0 3201041000 397 459 555 2600 0.07 6X1ST37.4NBK 6 x 1.0 3201061000 252 289 394 1560 0.12 6X1.5ST37.4NBK
Διαβάστε περισσότεραMS SERIES MS DESK TOP ENCLOSURE APPLICATION EXAMPLE FEATURE. Measuring instruments. Power supply equipments
MS SERIES MS DESK TOP ENCLOSURE FEATURE Available in 176 sizes. Screws are not appeared on the surface. Usable as rack mount case with optinal mounting bracket. There are no ventilation hole for cover
Διαβάστε περισσότεραMSN DESK TOP ENCLOSURE WITH STAND / CARRYING HANDLE
MSN SERIES MSN DESK TOP ENCLOSURE WITH STAND / CARRYING HANDLE W H FEATURE Available in 176 sizes. Stand / carrying handle can be adjusted in 30 degree. Maximum load is kg. There are no ventilation hole
Διαβάστε περισσότεραType. Capacities. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com LWN E
Type 526 Flanged Safety Relief Valves spring loaded Capacities The-Safety-Valve.com LWN 469.16-E Approvals Orifice D E T Europe Coefficient of discharge K dr PED/DIN EN ISO 4126-1 Approval No. 07 202 1111Z0012/2/26
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
Tel : 881745 Fax : 881749 LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product
Διαβάστε περισσότεραLR(-A) Series Metal Alloy Low-Resistance Resistor
LR(A) Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose.
Διαβάστε περισσότεραSMD Power Inductor. - SPRH127 Series. Marking. 1 Marking Outline: 1 Appearance and dimensions (mm)
Marking Outline: Low DCR, high rated current. Magnetic shielded structure Lead free product, RoHS compliant. RoHS Carrier tape packing, suitable for SMT process. SMT Widely used in buck converter, laptop,
Διαβάστε περισσότεραOperating Temperature Range ( C) ±1% (F) ± ~ 1M E-24 NRC /20 (0.05) W 25V 50V ±5% (J) Resistance Tolerance (Code)
FEATURES EIA STANDARD SIZING 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES UNIFORM
Διαβάστε περισσότερα0.635mm Pitch Board to Board Docking Connector. Lead-Free Compliance
.635mm Pitch Board to Board Docking Connector Lead-Free Compliance MINIDOCK SERIES MINIDOCK SERIES Features Specifications Application.635mm Pitch Connector protected by Diecasted Zinc Alloy Metal Shell
Διαβάστε περισσότεραLR Series Metal Alloy Low-Resistance Resistor
LR Series Metal Alloy LowResistance Resistor This specification is applicable to lead free, halogen free of RoHS directive for metal alloy lowresistance resistor. The product is for general purpose. The
Διαβάστε περισσότεραType 441 DIN 442 DIN. Capacities. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com LWN E
Type 441 DIN 442 DIN Flanged Safety Relief Valves spring loaded Capacities The-Safety-Valve.com LWN 462.03-E Approvals Approvals DN I 20 200 DN O 32 300 Actual Orifice diameter d0 [mm] 18 165 Actual Orifice
Διαβάστε περισσότεραVAR Series Zinc Oxide Varistor
FEATURES Round Zinc Oxide, leaded Coating: epoxy resin, flame-retardant material Operating Temperature Range: -40 ~+105 Wide operating voltage Approvals: CQ C, UL, VDE RoHS 201165EU; REACH Compliant High
Διαβάστε περισσότεραBALL VALVE NP - LEVE 754. Range of application: Temperature range: Perform standard: Order information: Paint: Soft seal Ball valve.
Soft seal Ball valve Unilateral spring washer Seat Float ball valve Flange PN16-40 DN15-200 Range of application: In industrial facilities, oil and chemical industry and related manufacturing industries
Διαβάστε περισσότεραShenzhen Lys Technology Co., Ltd
Carbide drawing dies Properties of grade Grade Density TRS Average Grain size Hardness (HRA) (g/cm3) (MPa) (ųm) YL01 15.25 93.5 3300 0.8 YL10.2 14.5 92.0 4000 0.8 YG6 14.95 90 2400 1.6 YG6X 14.95 91.5
Διαβάστε περισσότεραWeight [lb] = (Do-t)*π*L*t*40.84/ (60-1)*3.1416*100*1*40.84/144 = (20000*1*1)/(29+0.6*1) = Pipe and Shell ver 4.
1 Pipe and Shell ver 4.08 Page 1 of 2 2 Host Shell Description 3 Options: 4 Interior ip? - Calculate interior pressure 5 No Exterior ep? - Calculate exterior pressure 6 Rolled Plate pr? - Pipe or rolled
Διαβάστε περισσότεραPackaging Chip Resistors
Packaging Chip esistors Chip esistor eel Nominal Dimensions Inches () Packaging: Chips Per EI Standard S-481 inches B C D E F G H J 1 0.16 ± 0.01 4.0 ± 0.1 0.08 ± 0.01 2.0 ± 0.1 0.16 ± 0.01 4.0 ± 0.1 0.06
Διαβάστε περισσότεραNKT NTC Thermistor. Negative Temperature Coefficient Thermistor FEATURES
FEATURES Large, strong capacity of suppression of inrush current Big material (B value), small residual Small size, Long life, high reliability and fast response APPLICATIONS Switching -supply, switch,
Διαβάστε περισσότεραSC Style Optical Connector
SC Style Optical Connector OUTLINE SC connector is a push/pull style connector developed by NTT. The square, snap-in connector latches with a simple push-pull motion and is keyed. It is frequently used
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* PART NUMBER SYSTEM
Διαβάστε περισσότεραGAUGE BLOCKS. Grade 0 Tolerance for the variation in length. Limit deviation of length. ± 0.25μm. 0.14μm ±0.80μm. ± 1.90μm. ± 0.40μm. ± 1.
GAUGE BLOCKS Accuracy according to ISO650 Nominal length (mm) Limit deviation of length Grade 0 Tolerance for the variation in length Grade Grade Grade Grade 2 Limit deviations of Tolerance for the Limit
Διαβάστε περισσότεραAluminum Electrolytic Capacitors (Large Can Type)
Aluminum Electrolytic Capacitors (Large Can Type) Snap-In, 85 C TS-U ECE-S (U) Series: TS-U Features General purpose Wide CV value range (33 ~ 47,000 µf/16 4V) Various case sizes Top vent construction
Διαβάστε περισσότεραΣΩΛΗΝΕΣ ΕΥΘΕΙΑΣ ΡΑΦΗΣ LONGITUDINALLY WELDED STEEL PIPES
Βιομηχανικός Όμιλος Επεξεργασίας & Εμπορίας Χάλυβα (ΒΟΕΕΧ) Industrial Steel Processing & Trading Group (ISPTG) ΣΩΛΗΝΕΣ ΕΥΘΕΙΑΣ ΡΑΦΗΣ LONGITUDINALLY WELDED STEEL PIPES EXT DIAMETER INCHES ΕΞΩΤ ΔΙΑΜΕΤΡΟΣ
Διαβάστε περισσότεραShape Square. Tolerance of Varistor Voltage For Varistor voltage<68, Special For Varistor voltage 68, 10% Lead Wire Type Straight Cut Lead
Leaded Varistor for urge uppression VP eries Operating Temp. : -40 ~ +85 FEATURE Fast response Excellent clamping ratio, high peak current and pulse energy withstanding characteristics, providing strong
Διαβάστε περισσότεραAT Surface Mount Package SOT-363 (SC-70) I I Y. Pin Connections B 1 C 1 E 1 E 2 C 2 B , 7:56 PM
AT-3263 Surface Mount Package SOT-363 (SC-7) I I Y Pin Connections B 1 C 1 E 1 E 2 C 2 B 2 Page 1 21.4., 7:6 PM Absolute Maximum Ratings [1] Absolute Thermal Resistance [2] : Symbol Parameter Units Maximum
Διαβάστε περισσότεραMultilayer Ceramic Chip Capacitors
FEATURES X7R, X6S, X5R AND Y5V DIELECTRICS HIGH CAPACITANCE DENSITY ULTRA LOW ESR & ESL EXCELLENT MECHANICAL STRENGTH NICKEL BARRIER TERMINATIONS RoHS COMPLIANT SAC SOLDER COMPATIBLE* Temperature Coefficient
Διαβάστε περισσότεραNMBTC.COM /
Common Common Vibration Test:... Conforms to JIS C 60068-2-6, Amplitude: 1.5mm, Frequency 10 to 55 Hz, 1 hour in each of the X, Y and Z directions. Shock Test:...Conforms to JIS C 60068-2-27, Acceleration
Διαβάστε περισσότεραThyristor & Diode Modules
Thyristor & We offer a broad range of PowerBLOCK modules containing thyristor and diode pellets in a voltage range of 1200V to 4400V and a current range of 61A up to 1070A. The modules are designed and
Διαβάστε περισσότεραRoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS 555 Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. PRODUCT DETAIL Electrical Characteristics μh L (Min) Q MHz (Min) SRF Ω DCR IDC ma TEST FREQ: MHz TEST LEVEL: 100 mv Test Instruments HP4291
Διαβάστε περισσότεραControl cable YSLY-JZ/-JB/-OZ/-OB
Control cable YSLY-JZ/-JB/-OZ/-OB conductor material: bare copper conductor construction: fine stranded, class 5 insulation: PVC TI1 stranding unit: core sheathing material: PVC TM2 colour of outer sheath:
Διαβάστε περισσότεραSurface Mount Aluminum Electrolytic Capacitors
FEATURES CYLINDRICAL V-CHIP CONSTRUCTION LOW COST, GENERAL PURPOSE, 2000 HOURS AT 85 O C NEW EXPANDED CV RANGE (up to 6800µF) ANTI-SOLVENT (2 MINUTES) DESIGNED FOR AUTOMATIC MOUNTING AND REFLOW SOLDERING
Διαβάστε περισσότεραHFC SERIES High Freq. Wound Ceramic Chip Inductors
FEATURES High frequency applications. Low DC resistance and high allowable DC current. Close tolerance application.2% tolerence is available for particular inductance values. Small footprint as well as
Διαβάστε περισσότεραSMD Transient Voltage Suppressors
SMD Transient Suppressors Feature Full range from 0 to 22 series. form 4 to 60V RMS ; 5.5 to 85Vdc High surge current ability Bidirectional clamping, high energy Fast response time
Διαβάστε περισσότεραLinear diffuser. Dimensions. Description
Dimensions -- + D -- Description is a rectangular linear diffuser in aluminium. is suitable for both supply and exhaust air. is equipped with air guide baffles, making it possible to use for horizontal
Διαβάστε περισσότεραSiam Pacific Electric Wire & Cable Co., Ltd.
PRODUCT AND APPLICATIONS OF ENAMELED WIRE TYPE COMMERCIAL NAME INSULATION TYPE BASE COATED OVER COATED TOP COATED THERMAL CLASS ( C) WIRE RANGE (S) APPLICATIONS PVF POLYVINYL FORMAL - - 105 SWG 9 ~ SWG
Διαβάστε περισσότεραData sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206
Data sheet Thick Film Chip Resistor 5% - RS Series 0201/0402/0603/0805/1206 Scope -This specification applies to all sizes of rectangular-type fixed chip resistors with Ruthenium-base as material. Features
Διαβάστε περισσότεραΧΑΛΥΒΔΟΣΩΛΗΝΕΣ ΕΛΙΚΟΕΙΔΟΥΣ ΡΑΦΗΣ SPIRALLY WELDED STEEL PIPES
Βιομηχανικός Όμιλος Επεξεργασίας & Εμπορίας Χάλυβα (ΒΟΕΕΧ) Industrial Steel Processing & Trading Group (ISPTG) ΧΑΛΥΒΔΟΣΩΛΗΝΕΣ ΕΛΙΚΟΕΙΔΟΥΣ ΡΑΦΗΣ SPIRALLY WELDED STEEL PIPES EXT DIAMETER INCHES ΕΞΩΤ ΔΙΑΜΕΤΡΟΣ
Διαβάστε περισσότεραSmaller. 6.3 to 100 After 1 minute's application of rated voltage at 20 C, leakage current is. not more than 0.03CV or 4 (µa), whichever is greater.
Low Impedance, For Switching Power Supplies Low impedance and high reliability withstanding 5000 hours load life at +05 C (3000 / 2000 hours for smaller case sizes as specified below). Capacitance ranges
Διαβάστε περισσότεραAluminum Electrolytic Capacitors
Aluminum Electrolytic Capacitors Snap-In, Mini., 105 C, High Ripple APS TS-NH ECE-S (G) Series: TS-NH Features Long life: 105 C 2,000 hours; high ripple current handling ability Wide CV value range (47
Διαβάστε περισσότεραRSDW08 & RDDW08 series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (Typ.) CAPACITOR LOAD (MAX.) RSDW08F-03 344mA 3.3V 2000mA 80% 2000μF RSDW08F-05
Διαβάστε περισσότεραRoHS ASPI. Test Condition. DCR IDC Marking
-3D, 4D, 5D, 6D FEATURES: Magnetic shielded for low radiation Low profile, compact size Large Terminal surface for good PCB bonding Low DCR, High Energy storage, suitable for large currents Ideal for a
Διαβάστε περισσότεραTransient Voltage Suppressor
Transient Suppressor Features Glass passivated junction Low incremental surge resistance, excellent clamping capability Underwriters Laboratory Recognition under UL standard for safety 497B: Isolated Loop
Διαβάστε περισσότεραCSR series. Thick Film Chip Resistor Current Sensing Type FEATURE PART NUMBERING SYSTEM ELECTRICAL CHARACTERISTICS
FEATURE Operating Temperature: -55 ~ +155 C 3 Watts power rating in 1 Watt size, 1225 package High purity alumina substrate for high power dissipation Long side terminations with higher power rating PART
Διαβάστε περισσότεραFERRITES FERRITES' NOTES RAW MATERIAL SPECIFICATION (RMS)
FERRITES' NOTES RW MTERIL SPEIFITION (RMS) Property Unit Pratical Frequency Range MHz Initial Permeability urie Temperature Specific Gravity g/cm 3 Loss Factor @ FREQUENY -6 MHz Temp. oef. of Initial Permeability
Διαβάστε περισσότεραE62 AC Series Features
E62 AC Features Perfect for non-sinusoidal s and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated overpressure
Διαβάστε περισσότεραSeries of Wafer Check Valves Design:API 594, API 6D
Wafer Check Valves Series of Wafer Check Valves Design:API 594, API 6D Dual-Plate Wafer Check Valve : Type:C1 Dual-Plate Wafer Check Valve for by-pass Type:C2 Dual-Plate Double-Flanged Check Valve : Type:C3
Διαβάστε περισσότεραCERAMIC DISC CAPACITOR Class II 50V,100V,500V,1KV,2KV,3KV, Hi-K Type
Features: Capacitance has non-linear temperature coefficient Large in small size Epoxy Coating for 2KV and 3KV parts (equivalent to UL94V-0 standards) RoHS Compliance Halogen free products are available
Διαβάστε περισσότεραQFLC R0 K - D
Feature. Ferrite core wire wound construction. 2. Provide low DC resistance and high current. 3. Precision inductance tolerance is available. 4. Small footprint as well as profile. 5. All support Lead-Free
Διαβάστε περισσότεραSTAINLESS STEEL WIRE &BAR
STAINLESS STEEL WIRE &BAR History 12345678 Superb Quality Diverse Products Quick Delivery Competitive Price COLD HEADING SeAH Metal Co,. Ltd. is endeavoring to develop better cold heading quality of stainless
Διαβάστε περισσότερα3M-Series Miniature Pushbutton Switches
Carling Technologies MN- Snap-Action Miniature Pushbutton Switch MS- Sealed Snap-Action Miniature Pushbutton Switch Specifications Contact Rating......... refer to ordering scheme Electrical Life..........
Διαβάστε περισσότεραΕΦΑΡΜΟΓΗ ΚΑΝΟΝΙΣΜΩΝ ΝΗΟΓΝΩΜΟΝΩΝ
ΕΦΑΡΜΟΓΗ ΚΑΝΟΝΙΣΜΩΝ ΝΗΟΓΝΩΜΟΝΩΝ Ενότητα 01: Νηογμώμονες Α. Θεοδουλίδης Ιστορικά στοιχεία Το 1691 στο Λονδίνο ο Edward Lloyd ιδρύει ένα καφενείοτο οποίο σιγά-σιγά αρχίζει και γίνεται κέντρο συνευρέσεων
Διαβάστε περισσότεραSurface Mount Multilayer Chip Capacitors for Commodity Solutions
Surface Mount Multilayer Chip Capacitors for Commodity Solutions Below tables are test procedures and requirements unless specified in detail datasheet. 1) Visual and mechanical 2) Capacitance 3) Q/DF
Διαβάστε περισσότεραQUICKTRONIC PROFESSIONAL QTP5
osram.com QUICKTRONIC PROFESSIONA QTP5 ECG for T5/ 16mm, T8/ 26mm, DUUX fluorescent lamps QTP5 i.e. UMIUX T5 HO ES 01 Product Features: Up to 100.000 hours lifetime 1 amp start with optimized filament
Διαβάστε περισσότεραNPI Unshielded Power Inductors
FEATURES NON-SHIELDED MAGNETIC CIRCUIT DESIGN SMALL SIZE WITH CURRENT RATINGS TO 16.5 AMPS SURFACE MOUNTABLE CONSTRUCTION TAKES UP LESS PCB REAL ESTATE AND SAVES MORE POWER TAPED AND REELED FOR AUTOMATIC
Διαβάστε περισσότεραMechanical Properties. Electical conductivity 3) < 0.5 mω non conductive < 0.5 mω 1) 2)
CABE CAMPS Metallic Cable Clamp A MS 3420 Bushing Shell material: A - Aluminum Alloy B - Copper Alloy C - Stainless Steel Surface treatment: A - Black Zinc-Cobalt C - Black Polyurethane Varnished E - Electro
Διαβάστε περισσότεραFEATURES APPLICATION PRODUCT T IDENTIFICATION PRODUCT T DIMENSION MAG.LAYERS
FEATURES RoHS compliant. Super low resistance, ultra high current rating. High performance (I sat) realized by metal dust core. Frequency Range: up to 1MHz. APPLICATION PDA, notebook, desktop, and server
Διαβάστε περισσότεραFLAME RETARDANT POWER CABLE. 0.6/1kV SPYC, SPYCY, FA-SPYC, FA-SPYCY 0.6/1kV SPYCB, SPYCBY, FA-SPYCB, FA-SPYCBY. Application Standard
FLAME RETARDANT POWER CABLE Cable Designation 0.6/1kV SPYC, SPYCY, FA-SPYC, FA-SPYCY 0.6/1kV SPYCB, SPYCBY, FA-SPYCB, FA-SPYCBY Application Standard 0.6 / 1kV SPYCBY - Design guide : JIS C 3410(2010) -
Διαβάστε περισσότεραSMD Power Inductor-VLH
SMD Power Inductor-VH Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 321618C 3.2±0.3 1.6±0.2
Διαβάστε περισσότεραINPAQ Global RF/Component Solutions
MCB & MHC W Series Specification Product Name Series Multilayer Chip Ferrite Bead MCB & MHC W Series Size EIAJ 1005/1608/2012/3216/4516 MCB and MHC Series Chip Ferrite Bead for Automotive Applications
Διαβάστε περισσότεραHeat exchanger. Type WT. For the reheating of airflows in rectangular ducting PD WT 1. 03/2017 DE/en
X X testregistrierung Heat exchanger Type For the reheating of airflows in rectangular ducting Rectangular hot water heat exchanger for the reheating of airflows, suitable for VAV terminal units Type TVR,
Διαβάστε περισσότερα1000 VDC 1250 VDC 125 VAC 250 VAC J K 125 VAC, 250 VAC
Metallized Polyester Film Capacitor Type: ECQE(F) Non-inductive construction using metallized Polyester film with flame retardant epoxy resin coating Features Self-healing property Excellent electrical
Διαβάστε περισσότεραΠολυκαρβονικά Φύλλα - Κυψελωτά & Συμπαγή
PVC-ZHONGSHAN SOLID-HOLLOW Sheet -Front Cover Πολυκαρβονικά Φύλλα - Κυψελωτά & Συμπαγή Polycarbonate SOLID -,,,,, Embossed Polycarbonate HOLLOW Sheets - Twin-Wall and Triple-Wall sheet ISO9001 Certified
Διαβάστε περισσότεραMetal Oxide Varistors (MOV) Data Sheet
Φ SERIES Metal Oxide Varistors (MOV) Data Sheet Features Wide operating voltage (V ma ) range from 8V to 0V Fast responding to transient over-voltage Large absorbing transient energy capability Low clamping
Διαβάστε περισσότεραTSV. Suntan ZINC OXIDE VARISTOR. Operating Temperature Range: -40 ~+85 DIMENSION. T Thickness(max.) L:16mm min
Operating Temperature Range: -40 ~+85 DIMENSION L:16mm min SIZE D MAX H MAX d+-0.05 E c max D05 8 11 0.5 5±0.8 2.5 D07 10 12.5 0.5 5±0.8 2.5 D10 13.5 16 0.7 7.5±0.8 2.5 D14 17.5 20 0.7 7.5±0.8 2.5 D20
Διαβάστε περισσότεραStainless Steel. Stainless Steel
Stainless Steel 1-1 Stainless Steel About Stainless Steel 1-3 Producing Flowchart 1-4 Approximate Comparative Table 1-5 Chemical Composition 1-6 Mechanical Property 1-8 Surface Finish 1-10 Stainless Steel
Διαβάστε περισσότεραthe smartest energy Floor standing DHW (Domestic Hot Water) storage tanks for Forced Circulation Solar systems
the smartest energy Floor standing DHW (Domestic Hot Water) storage tanks for Forced Circulation olar systems www.thermicsol.com 15 Floor standing single coil DHW storage tanks Material: teel sheet EN-10130
Διαβάστε περισσότεραPb Chip Ferrite Inductor (MFI Series) Engineering Spec.
RoHS Pb Chip Ferrite Inductor (MFI Series) Engineering Spec. FEATURES The monolithic construction performs high reliability and ensures a closed magnetic flux in a component avoids magnetic and interference
Διαβάστε περισσότεραLong 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction
TS-HA/HB Series 105 C, 3000 hours Long 3000 hour life at 105 C with high ripple current capability 2 and 3 pin versions available Can vent construction RoHS Compliant Rated Working Voltage: Operating Temperature:
Διαβάστε περισσότερα[1] P Q. Fig. 3.1
1 (a) Define resistance....... [1] (b) The smallest conductor within a computer processing chip can be represented as a rectangular block that is one atom high, four atoms wide and twenty atoms long. One
Διαβάστε περισσότεραMetal Oxide Leaded Film Resistor
Features -Excellent Long-Time stability -High surge / overload capability -Wide resistance range : 0.1Ω~22MΩ -Controlled temperature coefficient -Resistance standard tolerance: ±5% (consult factory for
Διαβάστε περισσότερα4 Way Reversing Valve
STANDARD 4 Way Reversing Valve SHF series four-way reversing valves are applicable for heat pump systems such as central, unitary and room air conditioners to realize switching between cooling mode and
Διαβάστε περισσότεραConfigurations: Dimension (mm) B (max) A (max) 0.20 IWCCG1005. Inductance Range IWCCG ~ IWCCG ~ 1000 IWCCG
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Διαβάστε περισσότεραGS-FLANGE SYSTEM. Pipes & Tubes
Pipes & Tubes GS-FLANGE SYSTEM Hydraulic pipe E235N (St 37.4 NBK)...186 Hydraulic pipe E235N (St 37.4 NBK) Cr-VI-free plated...188 Hydraulic pipe E355N (St 52.4 NBK)...190 Hydraulic pipe E355N (St 52.4
Διαβάστε περισσότεραHSB Series. 1. Specifications DIN VDE 0110 Concerning clearance and creepage distances DIN VDE 0627 Connectors and plug devices
HSB Series 1. Specifications DIN VDE 0110 Concerning clearance and creepage distances DIN VDE 0627 Connectors and plug devices 2. Standards DIN EN 60 664-1 DIN EN 61 984 3. Approvals 169 All specifications
Διαβάστε περισσότεραCeramic PTC Thermistor Overload Protection
FEATURES compliant CPTD type are bare disc type CPTL type are leaded Low, medium and high voltage ratings Low resistance; Small size No need to reset supply after overload No noise generated Stable over
Διαβάστε περισσότεραSMD Power Inductor-VLH
SMD Power Inductor-VH PAD AYOUT Dimensions Unit: mm Type A B C E F H I J 252010 2.5±0.2 2.0±0.2 1.0max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252012 2.5±0.2 2.0±0.2 1.2max. 0.4±0.2 1.0min. 2.1 0.90 0.8 252510 2.5±0.2
Διαβάστε περισσότεραE62-TAB AC Series Features
NEW! E62-TAB AC Series Features Perfect for non-sinusoidal voltages and pulsed s. Housed in a hermetically sealed aluminum can which is filled with environmentally friendly plant oil as standard. The integrated
Διαβάστε περισσότεραIWCSeries FEATURES APPLICATION ORDERING CODE TRIGON COMPONENTS. Configurations: Dimension (mm) IWC C G 1608 K 22N T (1) (2) (3) (4) (5) (6) (7)
Configurations: FEATURES High frequency. Highest possible SRFs as well as excellent Q values. The wire is wound directed on the core at a precision pitch. RoHS Compliant. APPLICATION Pagers, Cordless phones
Διαβάστε περισσότερα± 20% (rated cap. [µf] ) 1000 Leakage Current: For capacitance values > 33000µF, add the value of:
TS-UP Series 85 C, 3000 hours Compact size for general purpose and industrial applications 2 and 3 pin versions available 20mm lengths for low profile applications RoHS Compliant Rated Working Voltage:
Διαβάστε περισσότεραΧαμηλές Βιβλιοθήκες Low Cabinets
Δελτίο Χαρακτηριστικών Είδους Item Data Sheet Χαμηλές Βιβλιοθήκες Low Cabinets Χαμηλές Βιβλιοθήκες (Μπουφέ) από πλαίσια μελαμίνης σε διάφορα χρώματα επιλογής, επενδυμένα με PVC. Ο σκελετός και η πλάτη
Διαβάστε περισσότεραOutput Power: W. Exclusively distributed by Powerstax
R Series, 50-150W Input Ranges : 9-75 VDC : Single - Dual /, / /, / Triple / ±, /, / ±0, Quad ± / ±, ± / : 50-150 W FEATURES General: to 100 Watts Wide Input Range : 10-7dc 2:1 & 3:1 Input Range High Conversion
Διαβάστε περισσότεραAccessories 2-WIRE PROGRAMMABLE TRANSMITTERS. 5331D Features: 5333D Features: 5334B Features: Typical Applications: Mounting and Installation:
2WIRE PROGRAMMABLE TRANSMITTERS 5331D Features: RTD, Thermocouple, Ohm, or mv input Extremely high measurement accuracy 1.5 kvac galvanic isolation 5333D Features: RTD or Ohm input High measurement accuracy
Διαβάστε περισσότεραBulletin 1489 UL489 Circuit Breakers
Bulletin 489 UL489 Circuit Breakers Tech Data 489-A Standard AC Circuit Breaker 489-D DC Circuit Breaker 489-A, AC Circuit Breakers 489-D, DC Circuit Breakers Bulletin 489-A Industrial Circuit Breaker
Διαβάστε περισσότεραPrecision Metal Film Fixed Resistor Axial Leaded
Features EIA standard colour-coding Non-Flame type available Low noise and voltage coefficient Low temperature coefficient range Wide precision range in small package Too low or too high ohmic value can
Διαβάστε περισσότεραAnti-Corrosive Thin Film Precision Chip Resistor (PR Series)
(PR Series) Features -Long term life stability and demonstrated the Anti Corrosion claims -Special passivated NiCr film for Anti-Acid and Anti-Damp -Tight tolerance down to ±0.1% -Extremely low TCR down
Διαβάστε περισσότερα38BXCS STANDARD RACK MODEL. DCS Input/Output Relay Card Series MODEL & SUFFIX CODE SELECTION 38BXCS INSTALLATION ORDERING INFORMATION RELATED PRODUCTS
DCS Input/Output Relay Card Series STANDARD RACK MODEL 38BXCS MODEL & SUFFIX CODE SELECTION 38BXCS MODEL CONNECTOR Y1 :Yokogawa KS2 cable use Y2 :Yokogawa KS9 cable use Y6 :Yokogawa FA-M3/F3XD32-3N use
Διαβάστε περισσότεραMCB and MHC Series Chip Ferrite Bead for Automotive Applications Qualified based on AEC-Q200
RoHS MC and MHC Series Chip Ferrite ead for Automotive Applications Qualified based on AEC-Q200 Explanation of Part Number MC 1608 W 12 1 H P - 1 2 3 4 5 6 7 8 9 1. Series Name 2. Size Code: the first
Διαβάστε περισσότεραELECTROLYTIC, Snap-in, 2 pin
CAPACITORS ELECTROLYTIC, Snap-in, 2 pin NOVER type LS A range of high CV, high ripple current, aluminium electrolytic capacitors suitable for general purpose use. Housed in compact bodies and fitted with
Διαβάστε περισσότεραCarbon Film Leaded Resistor
Features -The most economic industrial investment -Standard tolerance: +/-5% (available +/-2%) -Excellent long term stability -Termination: Standard solder-plated copper lead Applications -Telecommunication
Διαβάστε περισσότεραCL-SB SLIDE SWITCHES CL - SB B T FEATURES PART NUMBER DESIGNATION. RoHS compliant
CL-SB RoHS ompliant INTERNAL STRUCTURE 1 6 4 5 Part name Material Flammability FEATURES Cover Stainless steel (SUS 4) Slider Housing Moving ontat Fixed ontat pin Polyamido Polyphenylenesulphide Copper
Διαβάστε περισσότεραMetal thin film chip resistor networks
Metal thin film chip resistor networks AEC-Q200 Compliant Features Relative resistance and relative TCR definable among multiple resistors within package. Relative resistance : ±%, relative TCR: ±1ppm/
Διαβάστε περισσότεραCL-SB SLIDE SWITCHES CL - SB B T FEATURES PART NUMBER DESIGNATION. RoHS compliant
CL-SB RoHS ompliant INTERNAL STRUCTURE 1 6 4 FEATURES Part name Cover Slider Housing Moving ontat Fixed ontat pin 5 Material Flammability Stainless steel (SUS 4) UL94V- Polyamido PPS UL94V- Polyphenylenesulphide
Διαβάστε περισσότεραSERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES)
SERIES DATASHEET INDUCTORS RF INDUCTORS (MRFI SERIES) (8) 95-8365 venkel.com Features: RoHS Compliant and Halogen Free Good Q values High SRF range: 1nH to 47uH Tolerance: ±.2nH, ±.3nH, ±2%, ±5%, ±1% High
Διαβάστε περισσότεραDEUTSCH RR Series Filter Connectors MIL-DTL SERIES 2
DUTSCH ilter Connectors DUTSCH RR Series ilter Connectors MIL-DTL-2642 SRIS 2 DUTSCH RR Series connectors are medium-density, MIL-DTL-2642 Series 2 circular connectors using a bayonet coupling with visible
Διαβάστε περισσότεραFerrite Chip Inductor
FTURS SURFC MOUNT CS SIZS (0402 ~ 1206) DURL MULTILYR CONSTRUCTION MGNTICLLY SHILDD TP & RL PCKGING FOR UTOMTIC INSRTION OTH FLOW ND RFLOW SOLDRL Pb-FR/RoHS COMPLINT SPCIFICTIONS Case NFI04 NFI06 NFI08
Διαβάστε περισσότεραChapter 7 Transformations of Stress and Strain
Chapter 7 Transformations of Stress and Strain INTRODUCTION Transformation of Plane Stress Mohr s Circle for Plane Stress Application of Mohr s Circle to 3D Analsis 90 60 60 0 0 50 90 Introduction 7-1
Διαβάστε περισσότεραHotelia Doors. High-end design, unlimited possibilities!
WWW.EXALCO.GR Hotelia Doors High-end design, unlimited possibilities! Hotelia Doors Ανοιγόμενο σύστημα εισόδου με θερμοδιακοπή Η σειρά Hotelia Door αποτελεί ένα σύστημα κύριας εισόδου με θερμοδιακοπή,
Διαβάστε περισσότεραScreened electronic cable LiYCY
Screened electronic cable LiYCY Conductor material: bare copper Conductor class: class 5 = fine stranded Insulation: PVC Screen: copper braid, tinned Screen coverage: 70 % Sheathing material: PVC Flame-retardant:
Διαβάστε περισσότεραΔΕΛΤΙΟ ΔΕΔΟΜΕΝΩN ΑΣΦΑΛΕΙΑΣ ΥΛΙΚΟΥ BOSTIK OPF GREY
ΔΕΛΤΙΟ ΔΕΔΟΜΕΝΩN ΑΣΦΑΛΕΙΑΣ ΥΛΙΚΟΥ According to Regulation (EC) No 1907/2006 1 ΣΤΟΙΧΕΙΑ ΟΥΣΙΑΣ/ΠΑΡΑΣΚΕΥΑΣΜΑΤΟΣ ΚΑΙ ΕΤΑΙΡΕΙΑΣ/ΕΠΙΧΕΙΡΗΣΗΣ ΟΝΟΜΑΣIΑ ΠΡΟIOΝΤΟΣ ΑΡ. ΠΡΟIOΝΤΟΣ 068865 ΕΦΑΡΜΟΓH ΠΡΟΜΗΘΕΥΤHΣ 2 ΠPOΣΔIOPIΣMOΣ
Διαβάστε περισσότεραLUOYANG JINYUAN OUTSIZE BEARING CO.,LTD J Y C TAPER ROLLER BEARINGS
J Y C TAPER ROLLER BEARINGS Taper roller bearings are separate bearings. the inner ring with roller and cage form the inner components, and can be mounted separately with outer ring. It has tapered raceway
Διαβάστε περισσότεραNo item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor
PART NUMBERING SYSTEM SI F 0805 K 780 F (1) (2) (3) (4) (5) (6) No item Digit Description Series Reference (1) Meritek Series SI Signal Inductor LI: Leaded Inductor PI: Power Inductor (2) Type F Ferrite
Διαβάστε περισσότερα